Lucet forks for knitting
Simple hand tools that are used to make cord from yarn. Vidličky na výrobu tkaniček a náramků - tradiční nástroj pro zábavné tvoření s dětmi
- Downloads
- 53
- Likes
- 18
- Rating
- 0
114 models
Simple hand tools that are used to make cord from yarn. Vidličky na výrobu tkaniček a náramků - tradiční nástroj pro zábavné tvoření s dětmi
This model is compatible with the lego system.
It is a really simple design and based on the original from DELEKS. The original Fusion 360 project is included as well as STEP data, which can be used directly in Prusa Slicer. All parts are printed in ESUN PLA+ with 0.15 layer…
Small and quick Replacement Print for broken Forklift Forks Printed with PLA and 15% Infill
More sizes of fork hooks for the IKEA Skadis universal hook system by CSD_Salzburg.
Pretty much a straight-up copy of the Newmen TC adapter because that's the simplest, most elegant solution that I've seen. In fact, the Newmen adapter is inexpensive and such a nice fix I'd suggest you just buy it from them and give them…
Simple Fox Fork Topcap Socket, 26 and 32mm, flat bottom, ½" drive. Be aware that the topcap should be tightened to 25Nm and some 3D printed plastics may fail at that torque I printed it in Ankun PLA+, since PETG Did not work.
Bracket Ø34 mm for MTB forks. Easy to remove.
Jedná se o výměnné příslušenství pro manipulátor BruderToys - Pallet forks (paletovací vidle). Díly boků slepit s panelem. Nezapomenout nasunout vidle :-) Ať slouží.
I didn’t want to smash my finger into tiny pots and mess up the roots…problem solved! This prints well fast. I printed at a max speed of 120 mm/s and 0.2 layer height.
If your RockShox fork has the cutout for the “Torque Cap” hubs, but you have standard hubs, it can be tough to line up the front wheel with the thru-axle. Originally this could be fixed with the original design which had to be glued in…
Printed with PETG, 15% Infill. No Support. You'll also need an M6 socket head cap screw and an M6 nut. Consider decreasing the layer height on the top section of the AirTag bracket model. The walls in that area are relatively thin, which…
I recently designed this Crown Race Setting Tool for seating the Crown Race on my Fox 34 Suspension Fork by forcing it into place with a rubber mallet. The Tool provides a total operation height up to 190mm. Make sure to print it with the…
This number plate covers the control cables and wiring between triple clamps on a Trials bike. Dimensions are based on my 2000 Sherco 2.9, but it may fit others. Printed in PLA, the picture here shows it bare, right off the printer. I…
Replacement crush washer for suspension forks with an 8mm shaft - this is most 32mm RockShox and Fox forks. Sized so that it will print with four walls on a Prusa Mk3 with a 0.4mm nozzle - the 1.67mm thickness was suggested by…
Update: This has been the only crown race on both of my mountain bikes for about a year now and one has been on one of my wife's bikes for the past several months. It works. Saw the 1 1/8" lower crown race design by Jacques Dugal (…
Two tones because I ran out of filament mid print… tired of using cups that would get knocked over / tip over. should fit on most regular sized printers, might need to print at an angle to fit.
The goal of this design was to make a 3-bolt water bottle/bikepacking cage mount that could be secured to the 43mm diameter lower tubes of my mountain bikes' suspension forks. I wanted it to be a very secure fit, strong, lightweight,…
Under Desk Drawer for spoons and forks. In my version, the drawers are deeper, longer and narrower.
Added mounting points ( 2 pcs 2.6x6mm screws required) to secure the forks to the bottom of the carriage. This is less "realistic", but saves you from having to adjust them when they get tilted during use. Removed vertical bar pattern…
The Forks for Your salad. Print instructions Material :PLA Resolution: 0,1 Infill: 10-15% No Support
This is an action cam holder, compatible with GoPro type mounts, for bikes forks (diameter of 42.2mm). Because your cam needs then to rotated, I included the platform with 4 positions. Easy mounting with the knobs on pivot. The screws…
Paletové vidle pro modely měřítka 1:43
Take suspension tuning to another level with half sized volume spacers. For best results, print it out of PETG or something that can flex a little bit. PLA may be a little too brittle. Print with 100% infill, clip on, have fun. If you are…
Threadless Saw Guide for Steerer Forks This 3D-printable tool is designed to assist in shortening bicycle steerer tubes—whether steel, aluminum, or carbon —inspired by professional cutting guides like the Park Tool SG-6. It provides an…
Kids wanted some fork that would have out going rails closer together than standard forks put in a row. This is the result, enjoy! As always compatible with every piece of wood in our house … Děcka potřebovala výhybky co by ústily blíž u…
Bucket Hinged Forks for telescopic loaders compatible with Burder part 42145. Works for John Deere and Massy Furguson and probably more Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: Doesn't Matter Supports: Yes…
Guides a long 2mm hex key to make it easier to loosen or tighten the small screw that holds the rebound adjuster knob in place. The Fox Step Cast 32 is a great fork. Rebuilding one it isn't much more difficult than with the standard Fox…
Heel forks, or heel hooks for a circular knitting machine. These tools are used to add weight in specific places of the sock while knitting a heel, to keep the correct tension. The fork is a single piece that can be printed without…
Kitchen basket for spoons, forks and knives. Basket size: 130x130x130mm. Print in place no support needed.
Friction fit Apple AirTag holder for 32mm forks. THE FIT IS TIGHT, TAKES A LOT OF EFFORT TO PRESS THE AIRTAG BASE ONTO THE 3D PRINT, YOUR PRINTER -MUST- BE DIALED IN CORRECTLY. 100 Hours of riding and still holding strong. Can be easily…
The Ortlieb bag is slick but the mounting bracket assumes three M5 holes in the fork, spaced 64mm apart. Unfortunately my Specialized fork had only two holes, 155mm apart. So I made this adapter to let you mount to the two existing holes.…
Youtube demo link: https://youtu.be/phE24J7kQrQ?si=WOx-oIXxJhKfpGu_ Youtube build link: https://youtu.be/Xqmj-n5zHR4?si=U1yKhIICVGpWdTdb This is my radio controlled Guido the forklift from the movie Cars. It has working forks. It uses 3…
It is a little hard to print, and may take a few tries. My printer is not the best though…
Carbon Steerer Tube Cutting Guide (28.6 mm) This simple 3D printable guide helps you cut 28.6 mm carbon steerer tubes straight and accurately. It aligns your saw blade and keeps the cut square, which is especially helpful when shortening…
This model is compatible with the lego system.
If you like this model, please consider a donation: Buy me a coffee link
Imported From Thingiverse: A Fork and Pallet attachment for Vector Robot, also compatible with Cozmo If you're enjoying models like this, please consider supporting us on Patreon so we can continue making great content for you.…
Just a forks protector for my bike rockrider 540 with suntour sxr 120mm Category: Sport & Outdoors
This is a replacement for the Rokenbok forklifts - designed similar to the original but simplified and made easier to 3D print. The forks are basically identical, the mount is modified to have thicker parts and without the weird Rok clip…
This model is compatible with the lego system.
This model is copy of Park tools overpriced saw cutting guide. There is main M8 bolt for tighting down the tube (You can use any M8 bolt you want if you dont trust plastic bolts just dont puncture your carbon tube :D). To connect Part 1…
This is a vertical organizer for forks, knives and spoons, so you can store the cutlery on the cabinet door and free up, use it and abuse, just keep your kitchen clean a a safe space, your wife will apreciate it!!!! There are two…
Adjustable Pallet Forks Included are various fork lengths, and the step file is anyone would like to make there own length.
Should not be used to fully tighten on forks that have a direct 24mm 'bolt' on the top, Should be fine on forks that use a cassette tool, my cassette tool had a 24mm ‘bolt’ on top. This should be used to aid in damper, airspring or…
As we are heading for a one week bike trip, we wanted to have a place to pack our bulky but lightweight stuff like sleeping bags and inflatable mats. This leafs much more space in our bike trailer for other stuff, which is nice. :) I got…
suzuki sv650 front forks ring, thay are aesthetic and protect the front of the forks I recommande to made them with PETG filament Category: Automotive
Diese Einschlaghilfe habe ich für die 41mm Federgabeln der Suzuki DR650 konstruiert. Sie kann natürlich auch für andere Hersteller und Modelle mit 41mm Gabelrohren verwendet werden. Ich empfehle es aus einem stabilen Material wie ABS/ASA…
I made this for a RC motorcycle I am working on. You might need to cut/sand some parts if they do not fit.
Use with original hexagonal rod. Use PETG, ASA, Nylon…
Suzuki rm 250 guide protector. Print with PETG, Its available to install without forks disassembly. Heat it in one point with heat gun, next expand, fast mount and tight it. For print right and left just mirror it.
Front Reflector for Speedforks Version 1 : Designed for a wire that exits through the center of the axle. Version 2 : Designed for a wire that exits to the side of the axle. The reflector component can be sourced from AliExpress by…
printed in PETG 3 walls myself. clicks over and onto the existing loader front
Designed to fit snugly. If it doesn't fit, you might have to hammer it in. Or scale it down in slicer.
These forks are longer than the forks in the original force knight file. I found these to be a lot more effective than original ones. I would recommend using them against bots that have a wedge or any bot with low ground clearance. This…
Split one of the arm sections from Seabird HH's model, duplicated the forked side, and pasted it onto itself to create an adapter for a Logitech C270, so that I didn't have to reverse the whole assembly arm (I liked drewgraham80's insert…
This replaces the portafilter forks in a Baratza Forte or Vario. Since it holds the cup flush to the exit shoot, it makes minor mess and lets you easily transfer to your portafilter. This is designed to fit these style generic cups.
The Rokenbok Transgripper is one of the more unique vehicles in the line up due to its transverse clamping forks. On the earlier models these forks were permanently attached, and once broken you are out of luck. At some point the forks…
flexible handle to suit various grip patterns, assistive or otherwise. added a flexure pocket to allow for metal spoons to be inserted.
I will up load a adper to fit this specific toy that glue onto the back of forks but if want you make your own adapter to fit a different model print pla + or petg
It is a small set of forks that I designed so that my daughter can eat her fruit without the risk of getting punctured.
Custom made and 3d printed by me.
Bring style and organization to your table with the Bon Appétit cutlery holder! This refined and functional design is crafted to hold forks, knives, and spoons, keeping them tidy and ready for use. Perfect for restaurants, formal dinners,…
This is a modded SB Rapido Rear for a Carto/CNC Metal Bracket for VORON 2.4/Trident. I have removed the mounting slots and added eyes to the body. Now, when you are working on the toolhead, the SB assembly can not accidentally fall from…
Had custom stainless lines made for my vintage Kawasaki H1 500, along with different brakes that use a traditional banjo. Several ideas for keeping the line close, but this seemed fun to make. Updated this model. Marked it as V2, but it…
These are upscaled and updated to fit the larger excavator.
Fox mudguards mount to the arch and the lower leg bleed ports. Only the factory forks have these bleed ports but all forks have the fastener holes in the arch. I made these standoffs to zip tie to your lower leg with the mud guard to hold…
Motorcycle boots don't allow thestock shields to be fitted, and the rubber over aluminum seems like a too basic setup. This can be used not only with boots but also for normal fork bushings protection, especially the tall one, in case the…
Extra space to store cutlery
I do not use the remote lock mechanism on my fork, so I removed the remote and printed this cover instead. For reference, here what has been removed from the bike:
About We do an annual trip that includes some road riding and occasional after dark shenanigans. This year we are all riding small bikes. My KLX125 didnt have a headlight, so I made the necessary parts to fit one. This will work with…
Print at 60% infil Any Colours works I found Pla is a bit weak so i would try to print it with something stronger like PETG or Carbon Fiber Sorry For No photo Of The Pallet, cant find it smh
Hammer XT detachable Forks I designed this for my self but if someone is looking for something similar well here you go. this is made to work with the Hammer XT by simple shot. It is not a full sling shot Print Setting: 100% infill Print…
Use 4x M3 bolts. Duplicate and mirror the part in the slicer so the cable routing goes to the upside on both sides. Blinkerbase is 15mm, .f3d added if you need to adjust to fit your blinker.
This a speedo mount to fit on a an R6 Forks. I believe this would fit on a R1 and similar years too. The boss for the ignition key has been cut off to fit this. This fits a 85mm or 3 3/8" Gauge, the one I specifically have is a “Motor…
An insert for the tray for little Spoon and Forks. Its a bit higher, so Kids can get to the Spoon and Forks.
A small ground forks that can be used to mix soil for transplanting or in your home composter.
Adaptor for Suntour forks to receive a touring mudguard. Printed in PETG with 30-50% infill.
Nastavitelné parametry umožnují přizpůsobení modelu.
For a training tool on how to carry a load on a forklift. Toyota forklift forks (forks attachment, not adjustable). I don't think anyone needs it for this training tool, but if you want a paper weight and work at a forklift dealer it…
I'm printing these now, but they SHOULD be the right angles for the front forks. It is possible I have left and right mixed up. Category: Other
This adjustable-width bamboo cutlery organiser is sold under multiple brand names, but is fairly commonplace. This model permanently keeps it open to the maximum width, and hardly noticeable when inside a drawer. Make sure to print it…
fender mount for dual mtb forks
Aid tools for mechanical keyboard assembly. The forks are inserted between the plate and the circuit board and ease the building process by keeping the gap between these two components consistent. The switch pushers protect your…
This is designed to hold a meditation tuning fork set with a shaft diameter of about 8 mm, with the hammer about 10 mm. A standard hockey puck fits in the center (an excellent strike face for the tuning force.) Mine is printed in…
This is a custom mount for the Knog Plus light , designed specifically for aerodynamic (aero) front forks . Inspired by the original Knog mount, this design allows you to attach your light to oval-shaped pipes. The oval sketch shape is…
Basic seal driver to press seals int mountain bike forks. There is a 32 millimetre, 35 millimetre and 38 millimetre. I can add more at request.
I made this fork clamp because I needed a clean way to mount turn signals on my old KZ440 and couldn't find a good option. The available commercial parts were either inexpensive-looking universal clamps or more premium options that were…
I recommend printing on the side which faces the floor. These forks were designed to fit with the Plifter by Burnout but could be used for anything you need.
No supports, Recommended at 100% infill.
This model is a pair of extra forks that can be use for all types of battlebots! I would recommend it for a Beetleweight
A complete forklift toy on one flat kit card. Print the card, snap the parts out of the frame and build a little warehouse forklift with forks that really slide up and down the mast, four rolling wheels, an overhead guard, a driver's seat…
"If you’re part of the knife world, you’ve probably seen "Zero Forks Given" knives, stickers, or patches from Blade HQ floating around. Maybe you’ve wondered: Why forks? Why now? ...A movement full of fork-hating satire that flies under…
A heavy 16 t PORT FORKLIFT truck in H0 1:87 for model railway and harbour dioramas: body, cab, roof, interior, mast, carriage, forks, and front and rear wheels. Free sample = the forklift truck only (9 STL files, no supports,…
Overview I designed this small adapter to make the Granite Stash RT ( https://granite-design.com/en-de/products/stash-rt ) tool fit inside a straight 1-1/8" fork steerer . The original Stash RT is made for tapered steerers (1-1/8" to…
My son's Sino Heavy Forklift Toy's forks broke, the centre spindle rod snapped and the forks were able to work themselves off. I based these replacements on the originals with some key changes: 2 variants: Original & LevelOff (this…
This is aluminium steerer insert for carbon forks. It can be used for repair of lightly damaged fork steerer or increasing safety on a new fork. Do not even think about using it printed, even from PEEK. You have to have it machined. I do…