4,236 models
Design for bigger prints ( 1 meter tall rocket from a standard Prusa i3) : https://www.printables.com/model/467608-huge-moon-rocket A famous comics character's moon rocket. No need for screw, no extra part, no support, no gluing, self…
MTG Commander Deck Box 100+ sleeved cards. Default inner dimensions are: width 70, depth 65, height 93 mm but all can be adjusted. Parametrized Fusion360 file for easy adjustment included. MTG deck box for 100+ sleeved cards. Heavily…
Die 3D-gedruckte Abfalltonne im Maßstab 1:6 für ein Puppenhaus ist ein beeindruckendes Miniaturmodell. Dieser Bausatz enthält eine detaillierte Tonne mit folgenden Merkmalen: Öffnender Deckel: Die Abfalltonne verfügt über einen…
English Update 2023-11-02: In the construction file, I removed a few minor errors that occurred when changing the depth. Update: Since PrusaSlicer can now also emboss text, I have added a print configuration file without text. So you can…
I designed this water diffuser to avoid the holes created in the ground when watering, it allows to use higher flows. Its designed to be connected to a water quick connect. I printed it standing up with quick release connector facing…
Simple Razor Stand for Gillette Fusion Razor. This is remix from Thingiverse model: https://www.thingiverse.com/thing:4654647 No support needed. Material recomended: PET-G ( PLA, ABS, ASA) Min. layer hight: 0,15
A simple but modern light diffuser. Looks best with colorful lights in it and works pretty great as a christmas lantern. Main tower - best to use vase mode and some clear filament Base - to be printed in full filament (Needs some glue to…
Motivation I have a Laser Cutter and AC Infinity 6” Inline Duct Fan requiring an adapter to reduce the 6” fan inlet to the 4” ducting from the laser. Initially, I purchased the AC Infinity Duct Adapter, 6” to 4” Ducting Reducer , but as…
Safety first, so if you are making any project with high current lead-acid battery you need to fuse it. This design is allow to use holder many times and not afraid about wire/terminal damage. distance beetwen mounting holes - 27mm. Bill…
Custom flash diffuser for pop-up flash of Nikon D7200. Since version 2.2 it will fit other cameras as well due to the sliding slot: you only need one M3 nut and one M3x8mm screw. I used this fantastic design for the flash mount, many…
Garden Tap Adapter: 3/4 Inch to M24 for Water Diffusers and Filters Product Description: Introducing the Garden Tap Adapter, designed to convert your 3/4 inch garden tap into a compatible connection for M24 water diffusers and filters.…
Updates 14. April 2025: added the Information that it also fits on the Prusa XL xLCD. 18. November 2024 : removed the minimally longer diffusor file because the updatet fits well for PLA and PETG. Added the .stl files for the diffuser as…
Sicherungszieher für Fahrzeugsicherungen / MINI 997 Blade Fuses / Automotive Fuses Praktischer Helfer beim Sicherungsziehen bzw. setzen Konturen → 2 Decke → 5 Boden → 5 Erste Schicht → 0,2mm Variable Schichthöhe Stützen → Überall Infill →…
We have two versions for you here. One is the bracket without holes, here you simply use double-sided adhesive tape to attach the bracket to your cupboard. However, if you want to be on the safe side, you can download the file with drill…
This model was made to help creating adapters for IBC water tanks. It fits a S60x6 outlet (60mm with 6mm threads) and the Fusion 360 file is provided so you can edit it to suit your needs. I printed it with PLA and a .2mm layer height…
Ein Schlüssel, für die Größen 18, 22 und 24, um den Perlator von einem Wasserhahn zu lösen oder wieder anzuziehen. Die üblichen Werkzeuge sind sperrig und nie zur Hand. Leicht verstaubar lässt sich damit schnell ein Sprudlerkopf vom Hahn…
UPDATES: Added version with mounting screw holes countersink so knob does not collide with screw head for those using full sized screw heads. This focuser is based on the Crayford design, where a smooth pinion is rolled along a smooth…
Originally taken from here - https://cults3d.com/de/modell-3d/gadget/aquarium-hose-adapter I use this to assist in water changes for aquariums. This adapter will prevent blowing your substrate/corals/plants around. Printed with supports…
Contain and organize your dice while playing Solforge Fusion. These dice holders are designed to prevent accidental bumping of dice during game play. The creature die holder holds four d10 dice and are used to track the attack and health…
The light of my Elegoo Neptune 4 Plus was a little to bright for my liking. So i desgned this. My recommended print settings: * 0.4 mm nozzle * layer height same as file name * 4 walls * infill doesnt matter * You dont need supports Happy…
Did you install the Govee Permanent Outdoor lights only to discover that you're being blinded through your window? Well, here's the fix for that. This model can completely black out individual lights, or work as a diffuser. It all depends…
This is a cool face to have exposed in your bedroom or any other place, in my case I attached it to the front of my PC, so now everytime I look to the right it looks like I did something wrong o.O
A rugged parametric box for spare fuses for your car/motorcycle/caravan. It holds 19 fuses. You will need 3 М3х40 bolts and 6 M3 nuts for the hinges. Print settings: Print in PETG the box and the seal in FLEX material; 0.2 Structural…
I tried to work with the Parameters in Fusion 360. How to use it: Open the File in Fusion 360 In the Tool tab, click “MODIFY” In the fresh opened Drop-down open, the “Change Parameters”. Second Last all the way down. In the Parameters…
I wanted a V-slot cover that could act as a diffuser for the LEDs I installed on my Ender 3 Pro. The original design fit in the v slot but wouldn't slide easily over the LEDs. Recommend PETG due to heat from LEDs. 15% infill used with…
These bins have the perfect shape that nestle in the IKEA Maximera drawer's sloped wall. This version fits best if the Gridfinity baseplate is up against the curved part of the drawer. These drawers are used in the METHOD and SEKTION…
After redesigning the TLER's design I overall shrunk it down and added some new points to it. First I used a squared bit at the ends to join them together with super glue or your glue of choice. you can still use the rifle from the…
I designed this to be able to print strong boxes with a lid to keep small items safe in my daily carry bag. I've included a printable file for a 30 mm diameter and 30 mm high box with a wall thickness of 3 mm. I've also included the…
A parametric LED Matrix diffusor front plate. fullcontrolXYZ based, 100%extrusion, 0 travel, 0 retractions. Extrudes at 0.8mm, which is totally fine for a 0.4nozzle. A bigger nozzle will probably allow much faster print speeds. Prints as…
I printed at 0.2mm. The bottom when printed, which becomes the top, is done with two layers at 45 degrees. I used generic white PLA, but anything that is slightly transparent should do. More of my builds at makies.au
The diffuser distributes the light of the three LEDs in the bottom area of the MK4/S display housing. Especially if the display protrudes over the edge of a table it is difficult to see the illumination. In my case it is attached to the…
Printed with PET-G. I used 4 perimeter and 25% of gyroid infill. works fine, but no warranty in case of accidents!
Für unsere Sonnensegel brauchten wir einfach zu handhabende Seilklemmen für Kunststoffseile. Da sich die Seile der verschiedenen Hersteller unterschiedlich verhalten, kann es notwendig sein, eine kleinere oder größere Klemme zu verwenden.…
A drink/bottle coaster diffusor with simple LED lighting. The goal was to construct a small housing for a LED sticker without support. I hope you like it. It consists of a lid and bottom that are held together with a bayonet catch. The…
I really like this one! You get the original Fusion 360 parametric model. Just double-click on the visible dimensions to edit to your needs. Then export to the provided 3mf file for the slicing. Choose your favourite infill pattern.…
This is a diffuser that can be used to evenly distribute the light from Philips Hue E27 LED bulbs. Other light sources may also fit inside. I originally made the diffuser for a triangular lampshade , but it also works as a stand-alone…
Don't find what I was looking for to put in my Lack Table Enclosure, so I created this one. I try a few good design I found around but none was really what I was looking for… I don't want to see any screw, I also want a track to put my…
Small box and stand for soldering tips for Pinecil or TS100. The case is designed for short tips (88 mm length). Adjustment for longer tips: In case use have “normal” (105mm long) ones you can adjust the model in following ways. adjust…
Intro: Living in a shared apartment space can be tricky when it comes to upkeeping basic cleanliness. This three-compartment rack helps solve an issue I had with my neighbors leaving their sponges/toothbrushes/soaps… everywhere, stuff…
Not yet tested, but I figure bridges beat shallow slopes.
This is a light diffuser (with “stars”) that illuminates the inside of function.3d's Orbital Christmas tree. it uses an LED Puck of 70 MM diameter. In this edit, I have added a sleeve that holds the puck and a second sleeve that makes a…
Christmas Countdown! Follow Us! To get reminded about our free holiday models (like this one!) we are going to release regularly until Christmas 2022 ! Christmas Tree with LED Star Diffuser We have added holes to the tree branches so you…
Two part model with integrated flex part. The flex inlay has to be printed first and be installed into the second part (pause in gcode). The holder holds the fuses so they can't fall out (Ideal for storage in the car or similar). The…
Storagebox for fuses, wallmounted. With: 132.5mm, Depth: 56mm, Height: 170mm Fits: 10A, 16A, 25A, 35A and 50A fuses. Needs supports to be printed.
Custom-designed holder to hang the Samsung TV remote model TM2261S on IKEA Skadis perforated panels. It is printed in PLA with a 0.15 mm layer height, with supports, and provides a firm and snug fit to keep the remote always accessible…
This project started as a light diffuser for my phone and became a simple snowball shape light diffuser for winter time. Its easy to fit one LED candle inside it. Print a couple and you have soft lighting around the table or else where at…
Mopar 55196762AA, Jeep Grand Cherokee WJ 1999-2004 fuse puller tool. Modelled according to OEM. Stores inside and underhood fuse box lid storage. Tested working even when printed with 0.6 nozzle. If the fuse has stayed in place for 2+…
this is a water diffuser. fill a bottle with lukewarm water and twist it on then you can pour it over your car window and it's unfrosted. just make sure you turn your wiper on right away otherwise it will freeze right back on. and don't…
Bei einem General Austausch aller Heizkörperthermostate (Heimeier) wurde auch das Thermostat für die Fußbodenheizung ausgetauscht. Leider passt danach die Original Blende nicht mehr, da das Homematic IP Thermostat größer und rechteckig…
Diffuser fitting a Ford Focus MK4 to install Aliexpress ambient lights.
I’ve attached the parametric model in Fusion 360 so you can adjust it to your REMIX. Here are the parameters. The print settings are intended for: Material: PLA Layer height: 0.2 mm Organic supports Infill: 70%
Normally, the light from this torch is concentrated and quite focused. With this diffuser, it will become scattered and more like light from a lantern. The new Mini MagLite is with an installed LED. These new types of flashlights have two…
Here is the XXL-version of the diffuser for the Klarus XT21X flashligt. :-) Handy when you need to turn all that concentrated lightbeam to the surroundings. Perfect on the kitchentable during that poweroutage, in the garage or on that…
Here is the diffuser for the Klarus XT21X flashligt. Handy when you need to turna all that concentrated lightbeam to the surroundings. Perfect on the kitchentable during that poweroutage together with the Klarus Fottstand that you can…
As the Xmas nears all the Time things go missing or Broken so i decided to start to repair EVEN translucent Glass like things as here the LED-Defusor of a Christmas Star Top so it looks great as from 1m as you normally look at your tree…
I've made this LED track and diffuser for my printer enclosure (which I also designed, built out of wood, and could share the model for if some folks are interested) I've printed the rails, corners and front with opaque white PETG, and…
Water shield for fuse box, Mopar 1967-72 style. Original designer: Chrysler Corporation, Detroit MI, USA. Printed in transparent PETG. Scale Z-direction in slicer if necessary.
When I designed this cracker lifter to pull up only a few crackers (like Saltines) from this legacy container (RPI Stay Fresh, not available anywhere anymore), I was asked by others if I could design the container as well. So, I designed…
The Team Associated Pro4 SC10 has a couple of issues around the front headlights, one being that the body pops up and on top of them during crashes, and the other being the excessive brightness of the LEDs when looking directly at them.…
I needed a simple, effective way to manage some loose cables, so I created this compact cable hook. It features a sleek design with a cover to neatly hide the screw holes, keeping the installation looking tidy. How to Print the Hook The…
These are diffusers that fit the fully printed flashlight . Replace the original bulb conductor with this threaded one, then pick your diffuser and screw it on. I have found it most usable to actually glue the diffuser to the bulb…
Designed for this product. I lost the original cap. https://madebyfressko.com/collections/insulated-water-bottles/products/insulated-stainless-steel-660ml-1a
I made this to diffuse the light from my flip5. Its great as a very soft night light. Print settings Nozzle size ......................... 0.4 mm Layer height ....................... 0.2 Number of perimeters ... 3 Infill…
Spare part for a trumpet-shaped ornamental fountain diffuser. Includes a threaded element as the fixing accessory. I needed it, so I redesigned it with some improvements. I love solving problems with 3D printing.
A not-quite-right-angle elbow to deflect the stream of sweet-smelling vapor coming out of my diffuser.
Engineered for a secure grip and precise pouring control. Modeled to fit seamlessly on the original cap, thread this accessory solves the issue of the slippery metal surface, making it ideal for camping, hiking, or serving hot drinks like…
Recommended print settings: Material: PLA/PETG Layer Height: 0.20 mm or less Infill % : 15+ Supports: Yes, Tree/Organic Print Orientation: Default as modeled Brim: Optional
100x160mm sign, with art of a manager type person, reading "Do Not Confuse Me with Facts" Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames , which…
This is a very simple holder for the Girafus Pro-track-tor Model 227PA remote. It comes with a simple belt clip, but that doesn't do much good for mounting it on a refrigerator. So I modeled and printed this, hot glued 3 magnets on the…
Tyto 3D tištěné krytky jsou určeny pro zakrytování kovového pantu na hliníkových kufrech Shad TR55 . Originální pant má relativně ostré hrany , které mohou při manipulaci zachytit oblečení, poškodit textilie nebo způsobit drobné poranění…
Žáci v terénu a pomocí vybraných nástrojů změří a vytvoří model základní školy + okolí (online nástroje, fotografie, laserový dálkoměr). V 3D programu Tinkercad a Fusion 360 vytvoří reálný model ZŠ.
This miniature jet engine easily attaches to your car's AC vent. As it spins, it releases the fragrance of the elements you place inside its inner container. Update 11-May-24: Version V2 Added Important: Using a heat-resistant material is…
3D Printed Diffusion Panels Before printing watch The Next Layer video, Jonathan's setup is amazing and it explains what you can expect way better than I could in this description. At 8.25" (209mm) this is the largest printable diffusion…
Update 2023-09-17 Quad stl and Fusion 360 file updated with correct ‘Quad’ dimesions. Thanks to Evolver for catching this. Update 2023-08-31 New models (R2) have replaced the original models. The new models install easier in the Skadis…
Edit 8/3/2024: Added template without magnet holes. They are still in the sketch but they are not extruded. This easy to use template lets you make your own blank Gridfinity blocks. Sugested workflow: Open the template file. In the Modify…
3D Printable Screw Generator for Fusion 360 This is a fully editable Fusion 360 file designed to generate screws specifically optimized for 3D printing. Most standard metric threads are designed for metal manufacturing, not for FDM…
Welcome to my first attempt at a printable kit of the Battleship Fuso in 1:625 and 1:700 scale. This model is based on the Fuso model in the game World of Warships, completely remodeled from the ground up, with many tweaks and adjustments…
Converted @Zer0sum's design into Fusion 360: Modified chamfers to better match Packout design Adjusted tolerances for a better fit Added mounting holes for #8 Screws Upsidedownified = ready for printing without supports Modify the .f3d…
diffuse you LEDs! Be sure to read the manual to see how. STLs for reference only. Use openSCAD to customize to your setup. need a box? Print Settings Printer Brand: Creality Printer: CR-10S Rafts: No Supports: Certain parts Resolution:…
This is a redesigned version of my previous water diffuser. It's intended to prevent holes forming in the ground while watering, and it allows for higher water flow rates. The diffuser is designed to connect directly to a standard…
Holder for regular / standard size automotive blade fuse. I need to print it again so I took some time to I improve my previous remix. Shorter body, fuses can be inserted easier and as a bonus we can easily confirm if fuse is blown or…
A high definition 3d model of an Apple AirTag made from the specs Apple provides Also provides models to create the negative space needed to fit an AirTag. These are with 0.15 and 0.30mm margin. They do not have the flange between battery…
This is a parametric Fusion 360 file that allows you to generate different types of 3D printable springs by simply adjusting a set of parameters. The file includes three different spring designs : Blue spring → Classic wave spring…
Seatbelt Insert for your cars seat belt buckle to prevent the alarm from going off. Often while using the vehicle in the yard or off-road at slow speeds, one needs to be able to move around freely in the driver seat to see around the…
This is a small and simple device that can be used to fuse filament together. You can finally take all those end of the spool pieces and samples of filament and combine them into enough of a roll to print something. There are two parts, a…
english First of all: I appreciate every like and every rating. A small box with a hinged lid. It is suitable for medium sizes. As in my small box (…
A stackable fuse holder for automotive blade fuses that uses nothing more than 3D printed parts, M3 screws, and regular spade connectors. I thought that most fuse holders were way too bulky when I did build a super compact USB charging…
This is an enclosure where the length, width, height, shell thickness and gap for 3d printer tolerance is defined in the user variables menu of Fusion 360. I included the cad file so you can make a box of any size, or change the design to…
Update, 2024-8-22: Here comes a big one… would call this a major update: 1) Added Newport/Thorlabs SM05, SM1, and SM2 threads (with friendly support by user @FWest_1838166). 2) Added 0.75 mm pitch filter threads ø 35 mm, 46 mm, and 82 mm,…
– Edit 01/08/2024: Added 10 PrusaXL versions (300mm x 300mm, 11.8 inches) of the panels, they can be found over on their own model page here. Based on the panels featured in this Youtube Video by 3D Printer Academy and not being able to…
Based on the Fallout 4/76 Fusion Core model. Scaled to be game acurate by referencing ingame hands. Details are added based on in game textures. Instructions Designed to be printed without support. The two yellow body parts should to be…
deutsch weiter unten english First of all, a little advertising on my own behalf: I recommend you take a look at my latest box with swing stopper (…
v23: discovered that the bearing holes in the Y carriage were over-sized I have corrected them to measurements of my own printer. v22: added holes for the power connection on the heatbed and also chamfers to the 9 mounting holes. v20:…
Note : In the pictures, the feet are on the top instead of the bottom, I fixed that in the model after realizing that they where feet and not just connecting pegs! Fusion 360 redesign of the Chipp Walters' drawer system design (just the…
Fusée de TINTIN The iconic tintin rocket! I printed it with phosphorescent red and white filament Magnificent decoration for fans of the TINTIN comics! ______________________________________________________________________________________…
This diffuser prints upside-down and does not require supports due to the 45 degree slope and angled diffusion holes. Plenty of perforations on all sides to let the water out quickly while not disturbing the bottom of the aquarium. Feet…
DO NOT PRINT or DOWNLOAD THIS TO SELL! I WILL HUNT YOU DOWN IF YOU DO. These Files were made for serious fans not for some Jerk to profit from my hard work. This is my version of Mr. Fusion from Back To The Future. I searched long and…
