252 models
Have you noticed that the popular GC Video HDMI dongles for the Gamecube sag when a heavy HDMI cable is plugged into it? This simple brace latches onto the Gamecube vents below the Digital Video port and support the dongle from sagging.…
This is a mount for use with the Raspberry Pi Pico for the Gamecube. Mounts to the right of the original fan, using the original screw. My setup (not the one in the picture) includes the Noctua Fan, and it's mounted into the original…
Video Game Stands (PS1,PS2,PS3,PS4,PS5,PSP,XBC,XBO) by nibor_repmek - Thingiverse
Tired of displaying your GameCube lying flat on a shelf, lifeless and dull? Here's one stand that will make your GameCube come to life. This stand captures the instant in the boot animation, where the cube dunks down into the center.…
I created this for my Nintendo Gamecube controllers. It is completely printable without supports and in one piece. And keeps the cables nice and tidy behind the controller itself. Please do not sell my work without permission. If you wish…
Inspired by a design from Nicholas Piegdon: https://www.youtube.com/watch?v=8qTx_9HK7IM Used 3D scans from: https://bitbuilt.net/forums/index.php?threads/gamecube-oem-controller-scan.3844/
This is a 1:1 recreation of the GameCube shell top. more parts of the GameCube on the way. this is about 98% accurate but will fit OEM parts as well. I've included 2 types of the shell one with and one without the vent sides so you can…
This is an adapter plate to allow you to replace the stock custom 50mm fan in the Nintendo Gamecube with a standard 40mm x 10mm thick fan. I chose to use a Noctua 12v fan with it's low noise adapter for quiet operation. I recommend the…
Ever since I introduced the original Noctua Fan mount for the Gamecube back in 2020, I wanted to revisit it to see if it could be improved upon. One thing I never liked was the ugly external fan screws that mount the Noctua fan to the…
This is a 1:1 recreation of the GameCube Bottom Shell top. more parts of the GameCube on the way. this is about 90% accurate but will fit OEM parts as well. I can't guarantee that a Gameboy player and modem adapter will fit since i do not…
This is a 1:1 recreation of the GameCube Controller Plate Shell. more parts of the GameCube on the way. this is about 95% accurate but will fit OEM parts as well. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: Yes…
Completely built from scratch based on the original parts, as I had found the ones available don't quite perfectly fitted on my Q. I included the Tray as seperate parts, as well as a full version - you obviously only need one.…
None of this would have been possible without the amazing work done by GearHawkStudios These models let you print and put together a fully functional top shell for a gamecube controller. For the build you will need 6x 8mm m2 bolts, 6x m2…
This is a 3d printable replacement power button for the Nintendo Gamecube. Spice up your 'Cube or give it a bit of flair with a new button. Or just replace one that is broken or missing. I would advise printing this at .15mm layer height…
This is a 1:1 recreation of the GameCube Drive Door Shell. more parts of the GameCube on the way. this is about 95% accurate but will fit OEM parts as well. this does fit OEM Top Jewels. Print Settings Printer Brand: Creality Printer:…
This was one of the first non-functional things I modeled about 4 years ago, and I figured I should publish it so you can print one off as well! It wasn't ripped from the Gamecube or anything like that; it was just modeled by eye in…
You'll need: Trimmed GC front controller PCB Rev. C GC motherboard with DVD and serial ports removed M2 screws and nuts Raspberry Pi Pico with Picoboot FW Soldering ability/skills 80mm PC fan Assorted small coarse-threaded screws (1-2mm)…
Print standing up with lots of supports and ZERO infill. You can do it!!
Want to add some fun to your boring switch dock? This is a cover for the Nintendo Switch dock that is designed for those who love Gamecube (the best system ;). This is designed for the original switch, since I do not have the OLED. Check…
Print letters with horizontal expansion -0,28mm for the best result.
Buttons based on the design made by Qfox
Here is a friction fit stand for mounting a Pico inside a GameCube console next to the fan. The stand has option to use M2 x 5MM screws to secure the pico into the mount. The mount fixes into the gamecube using an original screw found in…
The Nintendo GameCube is such a fun console to mod and upgrade, one part that doesn't really see much in the way of mods is the top jewel. This is my easily printable replacement for that jewel. I have also included a step file making it…
This is our updated GameCube Fan mount which allows for fans to be installed without fasteners that would break previous prints. It replaces the original mount, you just transfer over the power switch board and pop the new 50mm fan in…
This is a complete redesign of the SD2SP2 cover, which widens the opening to access the Micro-SD card and better supports the SD2SP2 adapter. All dimensions were pulled from the original SP2 cover and optimized for FFF printing. I took…
After many months of dealing with a taped down battery cover, I finally sat down and made this replacement. I tried to best mimic the “spring latch” on the original cover, while still thickening the overall shape to extend it's life. Many…
I printed these in 0.3mm height all in one go - which took around 4 hours to complete a full set. Result snaps together perfectly, and holds the MC's in place for easy storage. Enjoy! Update 3/4/2021 I have Added Extension pieces you can…
I wanted to create a simple stand to hold my game cube controller in the same fashion of my 8bitdo controller. Supports are necessary but simple tree supports did fine. You'll notice that the one I printed didn't have the badging yet as…
Also check out: https://www.printables.com/model/908877-ps4-mini-game-case-keychain And https://www.printables.com/model/908860-ds-mini-game-case-keychain Thank You Since there weren't any free mini game cases I decided to make some I…
Small remix so you can mount a raspberry pi pico for the newly released picoboot. The suggested fan is a Noiseblocker XS-1 but any 50mm x 10mm 12vdc fan will be compatible. v1.1 = redid the model as I had zero experience in CAD when I…
These are Feet for a Nintendo Gamecube, the front fit a Standard OEM gamecube were as the back are designed for the recreated Gamecube shell that i made. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: Yes Supports: Yes…
A replacement reset button for the Gamecube. Prints well top down without supports. See Retro Frog's model's for the matching power button. This model has been reinforced a bit from the original in order to better accommodate 3D printing.
You will need to print with supports for the floating tab. I recommend painting these on yourself just on the overhangs (the bottom and each of the locking tabs and the bottom surface).
This mod uses a custom 3d printed fan mount for the GameCube, which allows you to install a standard 50mm x 10mm PC fan. The mod was created with the intention to use a quieter fan than the original system fan, but it also provides a…
This was modeled to the original Gamecube design. It may not be the easiest to print because of that. I printed with the shaft vertical as I wanted this to snap into the original location and revolve freely. Supports were used with a…
I wanted a stand for my Gamecube controllers which matched some of the ones I'd printed / designed for 8BitDo controllers, so designed this. I took inspiration from the remixes and attempted to use some of the sizings, but after many…
I designed this part so I could mount a GameCube USB-C board where the power port normally is on the GameCube. For best results, I'd print with supports on the corners of the overhangs.
------------ You can now buy this stand from RockerGaming on Esty. ------------ My version of GameCube controller stand. It utilizes the unique center "hole" in the controller design for a monolith design. Velcro on the controller cord…
Remixed the great Gamecube Wallholder i found with single pegs to make it compatible with the ikea skadis board. The Gamecube controller is simply pushed onto the protrusion. The cable is rolled up and stored on a second protrusion. The…
This is a little bracket I made for holding a Pi Pico inside the GameCube for use with the PicoBoot project. This allows you to have a cleaner, adhesive free install while retaining easy access to the USB port. Requires 2 M2x3 screws.
You will need to print with supports for the floating tab. I recommend painting these on yourself just on the overhangs (the bottom and each of the locking tabs and the bottom surface).
Hey!! So...got a cheap seconhand Gamecube to restore, picoboot nd swiss, paint and give a second life. As per usual, people chasing the GBA Modules leave the gamecubes without the Hi Speed Port cover, and so I tried some different ones…
An alternative case for the official GameCube to GBA adapter which fits comfortably in the Analogue Pocket. It reuses the screws holding the original case together. The reason for this case is because even after removing the clips that…
Inspired by the great Xbox Controller Wall Mount design. Category: Video Games
This is a redesigned analog stick for the gamecube controller. The one in the pictures has been sls printed.
Gridfinity Stand for Nintendo GameCube Controller, fits the Nintendo Switch 2 GameCube Controller.
Do you love the Gamecube controller but hate the rocking d-pad that comes with the stock controller? Does it infuriate you when you play combo-heavy games like Tony Hawk's Pro Skater and the game detecting a diagonal input instead just…
Really simple print, no supports needed (draft angles baby!). Using the included rubber plugs (instead of screws), this will eliminate vibrational noise passed into the plastic housing. You'll need to trim this flush a bit to make it fit…
The PicoBucket: A great place to store your WaveBird receivers, Memory Cards, Carby, Carby Remote, etc! After installing the PicoBoot modchip into my GameCube that had a broken disc drive I removed the drive for faster boot times, less…
Just a little Wavebird controller stand I designed and printed long ago and thought I would share. It is actually a remix from a stand on Thingiverse . I just removed some of the excess area in the base to speed up printing and added the…
A simple two-part fidget joystick that easily slots together with a touch of glue. Print the spring, at least, with gyroid infill for maximum strength.
Stand for the Picoboot mod (Raspberry Pico on Gamecube) with a slot for a M2 insert on the left and a pin on the right. You obviously need an insert for a M2 screw (as seen on the picture of the stand alone) and a M2 screw. UPDATE: I…
This mount will easily drop into your GameCube, and requires no modification whatsoever. It should be almost invisible once installed. Will print best as follow, with some supports.
Prints best with organic (tree) supports, ZERO infill, and two lines/perimeters You may need to cut a small notch from the ribbon cable connector in order to insert the bolt provided in the RetroGEM kit. Otherwise follow the normal…
this is a Gamecube Fan with Pico side Mount Fused Two free stl together
Print the Z button, I recomment SLA as I'm not sure how well some of the details would come out with FDM, but prove me wrong :) To install, do a standard teardown, follow the prep step below, and install the printed one. You will need to…
3D print your own Gamecube Controller gashapon shells! This will allow you create custom keychains using OEM/compatible buttons and sticks. This design is based of off 3D scans and are very close to the shells produced by Nintendo. Edit…
Combined stand for Nintendo Wii U with Gamecube controller adaptor. Cables can be tucked away underneath. Makes it easier to plug and unplug controllers if you play a lot of Smash like i do. All the vents will still be free to prevent…
Is your gamecube front plate looking like you've been peeing on it? have you been peeing on it? Print a replacement and I won't say anything USE A LOT OF TREE / ORGANIC SUPPORTS
Inspired on other models I found, I decided to create this version of gamecube control holder. Perfect size so it occupies little space.
The print files for the Bringus Studios GameCube Mini v2:
Remix of PS1/2 holder, 4 card version. Slimmed down the model to fit GameCube memory cards better.
This is a simple mod for the wireless mod by 8bitdo
Included are the raw and re-meshed versions of the original scans, the re-meshed versions contain a lower poly count to be easier to work with but are virtually identical to the raw scans. Average poly count per re-mesh is about 600,000…
@TurtleTechCreations designed an awesome Nintendo Switch dock cover for Gamecube enjoyers, but unfortunately the OLED dock is slightly bigger. So I made this modified version! If you like this model, make sure to also give a like to the…
Nintendo GameCube, WaveBird and DK Bongos Controller Display Shelves based on the swappable wall mount. So you can move them around as your collection grows. There is enough room behind the controller for the wire for easy storage. I…
2026 Version 2 Update: I optimized the original version for ease of printing. This version has small bridges for the wire channel built-in to the model as shown in the gif. By adding bridges and removing the contour from the bottom of the…
I bought some trigger plugs from battle beaver customs and thought they were pretty cool. I would of ordered them sooner if i could of tested them out. I decided to model them up in fusion for people to test them out, or to have them for…
Haven't found one online so i quickly made this one.
This is a mount for the amazing picoboot mod. This mounts in the front of the gamecube. Printed at .2 layer height takes about 25 mins Remember to download both models
Inspired by a guy I saw on youtube. I liked the concept, but I personally feel he made an over complicated version, and was trying to sell the design. With how many designs I've gotten from other people, I prefer to feed back into the 3D…
Print supports for the Skadis feet. For multicolor printers, I suggest you use another color for the logo to stand out more. The front could be done better, my skill are lacking to modify it properly for a better look. Most important…
Now includes a version for the Bambu CMYK Backlight Board and frame. Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture…
This is a GameCube controller holder with or without a wire hook for mounting on the wall via adhesive strip or screw. Works for all official and 3rd party controllers I've tested. If you like my work and want to support me you can use my…
Simplified version of the "Logo Dunk" corner stand: https://www.printables.com/model/152529-gamecube-logo-dunk-corner-stand Functionality-wise it's almost the same. However due to the reduced size, this stand will be LESS stable. Use at…
Using Orca Slicer, I assembled the jewel blank file and the Nintendo logo file (reduced to 38 percent, and cut several layers down so it would be nearly flush).
I love using my original consoles for gaming but my OCD really kicks in when there's tons of mismanaged cables creating somewhat of a rat's nest. Even if the cables in question are behind something or not immediately viewable - just the…
This is a the Nintendo gamecube controller mount for the Honeycomb Storage Wall.
i made a new moldbox design with registration all around to ensure a good tight fit of the two part silicone mold. tolerance is very tight so you need less time patching up the seal. i printed mine in PLA, PETG also works. have fun…
This is yet another GameCube-Pi Case. However it is different to many others. no 3d scan complete design in FreeCAD includes a holder for an SD Card Reader to attach SD cards to the slot where normaly the GameSave cards would have been…
Gamecube serial port picoboot mount. This is for mounting the Pico in the bottom of the gamecube. Printed on 0.2 layer height. Remember to remove the extra print from the clips. This is just to make them better when printing
A Collegue asked me to print the original, but he wont to glue the parts. So i combined the parts and make it printable for SLA Printing. The Images are of the Gamecube with my Elegoo Saturn 2 printed Holder with ABS Like Black Resin.
i also made a quick video on how i used the base for making my own epoxy gameboy cartridges. check it out:
Skadis GameCube controller holder
This is a simple plain model to pour epoxy in. i put a sticker down before pouring for the nice glazed over effect. :)
This is designed for holding a single gamecube controller. you can add foam if you want, but you dont have to
1:1 replacement for the Gamecube Memory Card 1019 Shell. Please note that all memory cards (59 / 251 blocks) have a different internal composition so this one only fits the original white 1019 block Memory card. But could be adapted, let…
just a support for the gamecube power supply to avoid dragging cables and maintain good heat dissipation
Gamecube Keycap printed with white and purple.
Use a color swap for the line work to add contrast. The frame that allows the picture to hang on a wall or stand on a desk / shelf. Just snap the picture in. A thin version at 2mm total thickness is included to reduce material and print…
Easily printable, includes not only the FreeCAD Design files but also the 2 variants which I made for an extender microsd card. The first modification was to move the brace and remove the screw holder by making the actual screw hole…
Saw one of these for sale but decided I would make my own version for free for anyone
Rafts: No Supports: No Resolution: 0.2 Infill: 10% Notes: The logo and the letters may require a raft or brim during printing, and some glue for assembly.
A Paper Mario themed Gamecube top shell that I remixed for a friend. I found the tree supports from PrusaSlicer were the most efficient and clean to remove. You'll want to make sure you print this top down.
This is an enclosure to house Robert Dale Smith's GameCube USB Adapter . The bottom piece has 4x holes to embed M2 nuts, so stop the print at layer 29 to embed them. Use 4x M2 15-16mm bolts to fasten it from the top.
Overview This is an improved version of Olympia's smoother parametric gateplates with a thread holder optimized for FDM. The original was meant for resin printing but I find that resin gates feel less pleasant than FDM, as the stick…
Relive the nostalgia of classic gaming with this GameCube-inspired mini keychain! Perfect for gamers and collectors, this tiny model is a fun way to showcase your love for retro consoles. Use it as a stylish keychain or a charming…
This holder allows for a GameCube disc to fit into any disc sleeve that would normally hold full size CDs. It has a raised lip around the inner hole as well as around the outside perimeter of the disc so that the disc does not touch the…
With the panel in place and the clip in a vertical orientation, insert the rounded nub first. Then rotate the clip over the screw boss
