133 models
A Temperature Tower designed to find the correct temperature for your filament! The included .gcode is sliced using Simplify3D with the "Multiple Processes" tool to set the temperatures at different layer heights. Take a look at the…
EDIT 6/8/2020 - Added my S3D FFF configuration in the Files section in case anyone wants to download it Gcode to print a 3DBenchy sliced in S3D Chris Elkin profile with retraction changed to 6mm @ 60mm/s Honeycomb infill 20% Jerk 10,…
Temperature towers with ready gcod and stl files. ABS- 220-260 and 10%fan speed in gcode ASA- 230-270 and 10%fan speed in gcode TPU/FLEX- 200-230 and 215-245 and 70% fan speed i gcode 20mm/s PLA- 190-230 and 100% fan speed in gcode PETG-…
The width is 110mm, although the printed version in the photo has been scaled in the slicer to 120mm. Thanks to the gentle slope, all remaining water flows easily into the sink. Any material, but the smaller the layer height, the better…
V5 For P1P and X1C As this is skipping the LIDAR but keeping the Bed Leveling if desired. Date : 5 March 2023 Improvements: -Improved the overall speed of the start gcode -Reduced the purge of filament by a factor of 21 times 5mm vs 105mm…
Start + End Gcode for the X1 Carbon that significantly reduces the time to start printing without damaging your build plate, and making sure the nozzle is well primed to give a good first layer. The stock Gcode heats and cools the nozzle…
Keychain from game Minecraft Sword Axe ... - SketchUp 8 + stl + gcode (Ender 3 v2 Prusa Slicer)
Jednoduchá kočka pro začínající tiskaře v souborech pro stažení najdete i gcode který si můžete stáhnout pokud jste začátečníci a nemáte zkušenosti se slicerem. Nezapomeňte se kouknout na můj profil kde najdete další moje modely. A simple…
Temperature towers for PETG and PLA that begin from hight temperatures. And GCODES for ELEGOO Neptune 3 Pro
Its My GCODE what i use. Mein GCODE was is so nutze. ------------Start Code----------------------- G21 ; set units to millimeters G90 ; use absolute positioning M82 ; absolute extrusion mode M104 S{material_print_temperature_layer_0} ;…
Temperature Tower to find the correct temperature for your filament Print instruction Material: PLA Print resolution: 0,20 Bed 60°C First 10mm prints with 190°C then every 5mm the temperature increases by 5°C !warning! Watch the first few…
This gcode is based upon the great work of Thrutheframe, though I ended up removing or changing a lot of his alterations due to them already being folded into the current P1S stock gcode. So these files don't change motor voltages (Bambu…
They can be used combined with each other or not. Printed with 0.4mm nozzle, 0.15mm layer height and 20% density Added freecad file in case you want to modify the design Se pueden utilizar combinados entre sí o con un sólo motivo. Impreso…
This design is not mine. This is the Mini+ Gcode that I made for (Makerbot T-rex) stl and design originally found at this link: https://www.thingiverse.com/thing:275091 This for those that don't want to slice the stl themselves and…
Note: The feature to generate your own temp towers has been built into the SoftFever fork of Bambu Slicer. Update 28/1: Updated slicer version and added PLA Plus Temperature Towers for PLA / PLA Plus / PETG / ABS / ASA on the Bambu Labs…
Just another vase, but it's modeled using basic shapes, modified by math functions through SliceUp software . The gcode is tuned in order to work with a Creality Ender 3, it can be easily customized editing the start/end sections of the…
The original file is here , I provide Gcodes for Prusa: MK4 MK4S, MK4+MMU3 MK4S+MMU3. Core One Core One+MMU3 Reminder: if you're not using Gcode, before printing you have to go to: Print settings Layers and perimeters Perimeter generator…
07/17/2023: 0.6mm Nozzle First Layer Tips! Read below on how to get rid of those gaps/crevices in your first layer when using 0.6mm nozzles. The following was performed on the 0.2mm Layer Height Profile. Manually increase your z-probe…
Jednoduchý pes pro začínající tiskaře v souborech pro stažení najdete i gcode který si můžete stáhnout pokud jste začátečníci a nemáte zkušenosti se slicerem. A simple dog for beginning printers in the download files you will also find…
Please leave a “like” is appropriate, THX NOW WITH MK4 GCODE!!! Print the Face Mask and Crown separately, as are the back grill, top and bottom ear pieces. The facemask takes 34+ hours with MK3S/+ Nozzle 0.4 The Crown takes about the…
UPDATE 29/9/25: I will soon be introducing new code so you can also control the acceleration of the wiping motion. Please be considerate with the values because it will wear out your nozzle brush much quicker. I recommend values 10-12k…
Gcode ready to print, to test temperatur lvl of artillery. from 220 to 180 °C Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 10 Filament: everyone PLA, PLA+ Notes: just connect and print. Category: 3D Printing Tests
With the update of Bambu Studio to version 1.7.0.53 (Public Beta), there are some changes to the syntax of the gcodes command. I have updated the start code to work with the new calibration lines. The end code remains the same. This is…
Test for VFA in all directions at speeds from 40mm/s to 190mm/s. At every notch (5mm apart) the print speed increases by 10mm/s. The gcode is a ready to go file for PLA for your MK4S; the 3MF is the PrusaSlicer project, not just the…
I really liked this model and thought it would make a really cool Xmas present for the boys to put together a couple and paint over Xmas. I split it up to optimize it for the best printing possible. It is currently printing now so this…
My other ornament designs: Kelly Egan's ornaments There are two versions of this ornament, a single and double version. The double version is thicker and mirrors the single version in the z-axis. These stars were designed in Python and…
DO NOT COPY AND PASTE THIS INTO YOUR PRINTER, IT IS FOR REFERENCE ONLY!!! SERIOUSLY, I TAKE NO RESPONSIBILITY FOR DAMAGE TO YOUR PRINTER OR FOR A POTENTIAL ROBOT UPRISING! I asked ChatGPT/Bing/Sydney to comment all of the start gcode from…
printed used fuzzy skin on outer walls in PrusaSlicer model inspired by the Twitter Post https://twitter.com/chrisriley3d/status/1596701282538258432?s=20&t=gFmaKmfCFAefRMHfyTqulA
These emoji tokens use special gcode and dont use much filament. Enjoy. A single extruder is used to make an embedded, multi-color design that exists only on one layer of filament. Update: turns out I didn't merge the kiss emoji…
This model tests your printer's maximum gcode resolution. With your normal speeds and settings you can increase your Gcode resolution until either your MCU cannot keep up or your Baudrate is too low. How to do it: Decrease the values…
Temperature tower for PLA and PETG including the ready made G-codes for the Ender 3 V3 SE.
Test the optimal temperature for your filament to reduce stringing. It includes custom gCode to automatically change temperature from 240-200°C. A negative volumetric box is added to exclude temperatures 190-180. It can be changed…
Summary Organizer tray for the arm rest console - adjusted STL with slopes under ledge for less requirement for supports, and gcode file adjusted to fit supports on the Mini+ plate. Note : Print using the gcode file if possible (using…
## 🚨 CRITICAL MATERIAL WARNING 🚨 This drying profile is ONLY suitable for: - PETG - ASA - ABS ### ⛔ DO NOT USE WITH PLA ⛔ The bed temperature of 80°C will DAMAGE PLA filament! - PLA begins to fuse at temperatures above 60°C - Using this…
Fun dangling flip flop earrings with a multi-color print utilizing filament changes. Excited to see what color combinations you choose! Size up or down but watch the size of the post hole. We included the gcode for a set. But feel free to…
I made startup Gcode without 2nd prime wipe line, but im improve and move it to front and make possible better cleaning, specially after flow test when nozzle little bit leaks out filament. I tested its for x1c with ams, but i guess also…
Use your enclosed printer to dry your filament. I've added a few sample g-code files, but you may generate more here . Instructions: Download or generate and run the .gcode from this project Please choose the appropriate chamber fan in…
All in One Temperature & Bridging Tower - PLA MK4S GCode. Specifically sliced for the latest MK4S version with the 0.4mm high flow nozzle (HF0.4) Uses the default PrusaSlicer 0.2mm STRUCTURAL preset as that is what you will most likely be…
Ender 3 CR-10 PLA Petg temp tower. To change the temperature automatically download the Gcode
The STL was added just to be able to create this repository.! Using this Macro i solve 2 thinks 1. Im sure that the bet it will not get warped/taco because it is heated gradually 2. Eddy will not be heated up because it is moved out of…
Resliced temp&bridge tower for MK4 and XL slicer 2.6.0, PLA, brim, 0.20 DETAIL MK4 - 0.4mm XL - 0.6mm nozzle resliced for new FW 5.1.0 slicer 2.7.0, PLA, brim, 0.20 STRUCTURAL MK4IS - 0.4 nozzle XLIS - 0.6 nozzle
The awesome filament dryer design and gcode by @Leftcetio, but with GCode that works on Prusa MK4 and extends the drying time to 6 hours. Read the original creator's description first, it explains a lot in great depth. This description is…
Just run the gcode from sd or octoprint Use feeler gauge or paper while adjusting knobs Category: 3D Printing Tests
This mount is specifically designed to keep your 3D printer's nozzle clean automatically. Built for the Ender 3 S1 and similar models, the design includes a cleaner inspired by the Bambu Lab system, but adapted and enhanced to work…
Well its a config bundle and so you have to import it first. If you slice benchy with this profile you will get a benchy in 8 minutes. This is just an upload of the Prusa's profiles used for the example gcode that comes with the printer.…
Carabiner Ring Attachment for Nalgene Water Bottles – PLA/PETG/Nylon Version A practical 3D-printed carabiner ring designed to secure a Nalgene water bottle to backpacks, gear loops, or climbing packs. Material Performance: This model…
Bed leveling/tramming+create mesh .gcode for Ender 3V2 by Teemo3D | PRINT3D GIFTS Print Settings Printer Brand: Creality Printer: Ender-3 v2 Rafts: No Supports: No Resolution: 0.2 Notes: Bed leveling/tramming+create mesh .gcode for Ender…
Upload of my project from thingiverse since thingiverse has become trash! Want to try non-planar printing but don't want to remove the fans from your printer or bother setting up Slic3r Non-Planar. Try this! Using 60c bed temp and 200c…
the rock “thinker" w/ .gcode
This G-code is a service and maintenance utility for the Prusa XL , designed to evenly distribute belt tension after manual belt adjustments. When adjusting belt tension, the tension is often unevenly distributed along the belt path. This…
Zum Skript selbst gibt es eigentlich nicht viel zu sagen, außer... es muss nichts mehr im Prusa Start GCode oder End GCode ergänzt werdenzum aufrufen des Skriptes braucht es beide Pfade (Python und Skript) z.B.…
Remix of the temperature tower linked, but with the gcodes added in the 3mf file
Requirements Software needed: Klipper Mainsail / Fluidd / Octoprint / etc Hardware needed: 3d printer (obviously) A brass/steel brush (same material as your nozzle recommended) Glue (optional) STEP-BY-STEP INSTRUCTION Create a .CFG file…
FreeCAD GCode import Python module. Imports 3D GCode from Slic3r and Skeinforge (RepRap) as groups (layers) and 3D wires (poly-lines) in FreeCAD document. In FreeCAD you have the full power of a CAD application to visualize the generated…
This Gcode is the original G Code but in this one it scans for the bed QR Code Then it does a Home Check so that if it doesn't see the QR Code it PAUSES asking for BED or Continue, IF you add the plate IT NOW SCANS that Plate and then…
With the update of Bambu Studio to version 1.7.0.53 (Public Beta), there are some changes to the syntax of the gcodes command. I have updated the start code to work with the new calibration lines. The end code remains the same. This is…
Original didn't provide Gcode. This is for people that just want to download and print without knowing how to change Temps. This is the right thing for you. I did not create this model, I changed all the temps to be ready to print. Enjoy
Improved Start GCode for P1S The purge line from the A1 has been spliced into the P1S start GCode. The purge line changes location so it is (almost) always placed beside the print, and is much smaller than the original hockeystick purge…
The gcodes are exported for a Prusa i3 from the demonstration site for Full Control GCode: fullcontrol.xyz I didn't change anything from the gcodes except from suppressing the initial purge that was done mid-air. The initial path seems…
ok so after extensive testing etc, ive finally got my p1p coding worked out rather well. im sure it could be optimized because its derived from an x1, however.. so far it works great for me. To set this up, I recommend making a different…
Updated for new 6.9.0 FW and configuration files (22-Aug-26) I took fuchsr's famous and excellent remix of Tronnic's Temp Tower. I sliced it and created G-Codes for each tool for simple and rapid use as some people may be running a mix of…
🇬🇧Here I decided to modify the start GCode of the Prusa XL 5 heads to be able to use the platter of your choice. The bleed line will be on the front of the plate, and no longer on the tabs. For example, for my part I use a lot of texture…
Found this GCODE a few years back and found it very useful for cleaning/lubricating my smooth rods. Demo: I use this stuff: https://www.amazon.com/Super-Lube-21030-Synthetic-Grease/dp/B000XBH9HI/ Blurred out in pic as I'm not advertising…
With the Prusa Core One+ (Plus), once you change the setting for vent management to "Auto", the printer can automatically open and close the vent as needed by the particular model being printed. I didn't see the gcode file posted anywhere…
💡 Jednoduchý a spolehlivý tisk na Prusa MK3! 💡 Tento model byl pečlivě upraven do G-code pro Prusa i3 MK3
Print with 20-25% infill
if you search an loud whistle that sounds like a Elephant then you found it!!!! PS: Da ancient Maya used this whistle in all of da lot of wars
Optimized OrcaSlicer profile for the Anycubic Kobra 2 Max with custom start/end gcode, calibrated pressure advance, and tuned flow ratio. Tested daily with Elegoo Rapid PETG on a stock 0.4mm nozzle. Unlike other K2 Max profiles that just…
cruise control for bikes without it, for 22 mm handlebars but you can scale it. i have not printed it so i dont know if it will work in pla. i reccomend putting some tape or something rubber on the handle bar to not damage it.
its a little tool for people that need a holder for their hammers on their belt. i printed in 02mm and its quite strong. it does need support under the clip because its not down to the ground due to a math mistake that i have not fixed it…
Power tool safety switch lock Lost a couple of the original ones and was just swapping as i needed the tools. Decided to just make my own. I used PETG .4 nozzle .15 resolution suggested (ok with .2) Supports in file (painted on) Brim not…
ON YOUR OWN RISK! In general you need heat to dry filament. Only silica gel etc. is not enough to move the moisture out of your filament. If you don't have a dryer like me, you can use your print bed for drying. You can use a small box…
These are just my gcode files to implement into your slicing profile. I cannot upload the full end gcode as printables does not let me so just put the gcode line i wrote into it under the “park print head” line. It retracts 13mm after…
A simple Lazy Susan.
Llavero de dos gatos y archivo Gcode con cambio de filamento para cambiar el color de los moños. (recomiendo si descargas el archivo STL habilitar el alisado y relleno 100% para un acabado impecable y resistente)
Multimaterial - MMU 3 Multicolor Print-MK3.5S with multi colored segmenter-r3 This is a Remix / Revisitation of the original .gcodes of MMU3 Multi Material Unit. These .gcode are specific for printing by MK3.5S, and are provided by…
This is a simple silicone brush holder used for cleaning the nozzle before the initial filament purge at the beginning of printing. After testing and failing several models here I decided to make one inspired by KRYS-3D, but designed from…
Just made a one-and-done gcode for lazy people like me who want a Nevermore v6 enclosure fan. Parts you'll have to provide are 2x 2 pin WAGO 221 lever connectors, 2x 5015 blower fans, 2x M3*4*5 heat set inserts, M3 screws (forgot the…
This gcode allows us to fully automate the filament change and to cancel the dead times. Just load it on the uSD and send it to print as any other file. The gcode takes care of: bring the nozzle to temperature; extrude some filament…
I had them made up as follows; Button N - Nozzle leds Button Fan - this is to control my nevermore on/off Button Light - my interior leds also included the blank step file if you need it Print Settings Printer brand: VoronDesign Printer:…
These G-code files are service and endurance tests for the Prusa XL toolchanger . They are designed to repeatedly cycle through all toolheads to stress-test the docking system , tool coupling mechanism, and repeatability under controlled…
Este es un fichero .GCODE que nivela la cama en 9 puntos diferentes. El fichero calentara la cama a 60º y el nozzle a 200º. Despues ira al primer punto de calibrado. Cuando tengais calibrado el primer punto, presionar el boton de la Ender…
This is my version of Gcode (Slic3r) for those of you who want a ooze free mesh bed leveling. Also, for those of you who suffer from live z-adjustment of different materials. Process of the Gcode NOTE: Please clean and clear the bed…
As of July 5, 2024 the official GCODE for printing the MMU3 printable parts is done with the Print settings configured for ‘SPEED’ rather than ‘QUALITY’ and makers (myself included) have reported problems using the provided file. This…
General the 3 left buttons i decided to use the STOP, HOME-all and the filament exchange symbol from @DanielMerrett_429029 https://www.printables.com/model/641538-fystec-hotkey-buttons Software I will hopefully soon have them set up and…
In simple terms: The following G-code has been modified to improve the startup times of the printer, with the addition of conditions that allow the printer to understand when and if it is better to heat the chamber, and open or keep…
I made this set of gcode files after being annoyed with how the Z axis moves up when loading filament. It's especially annoying if near the top and the printer has been powered down so it loses it's home. After turning it on and you try…
Hello,,, Here we have more versions of our Festive reusable Christmas Cracker
I got this E-Leveler in China it only Costed me 4 USD does it work? IT actually Does saves me so much time in leveling my Bed Slingers with knobs. Just way better than the paper technique on my opinion if u have like 5-10 printers needs…
The new E3D Revo system is a game changer in many ways. However, one of the best features of the system, the ability to change nozzles while the printer is off/cold, has a big flaw. After the printer has completed a print, the filament is…
Bambu Lab P1S - Fast Start G-code (47 Seconds) This optimized G-code procedure drastically reduces the start-up time for the Bambu Lab P1S, cutting down the initial procedure from 6 minutes to just 47 seconds. The process is designed to…
I lost one of the end caps on my Yakima rack and found a file online to 3D Print, but it did not fit and only offered one side. I decided to design something in 360 and they did not turn out so bad at all. I printed both side and they fit…
great for frogs and small geckos. Gcode
Jednoduchý ptáček pro začínající tiskaře v souborech pro stažení najdete i gcode (Toto se týká jen gcode souboru. Pozor model jsem rozdělil na dvě části budete potřebovat lepidlo.) který si můžete stáhnout pokud jste začátečníci a nemáte…
Are you using the CrealityPrint slicer for one reason or another and would like to have the printing stop automatically at the right point? If so, then with these instructions it is possible. If you don't use that slicer, you probably…
This is a collection of models and a *.gcode file for Prusa MINI+ printer to transform the Prusa MINI+ into a Zen gardener. print the Zen garden tool (it is a 7mm bit compatible elongated tool that fits on your Prusa MINI+ nozzle) print…
