362 models
(Description in german below // Deutschsprachige Beschreibung folgt unten) Inspired by the design "Funnel and bottle base for Elegoo resin by antcam" (on Thingiverse) I designed a new, slightly modified version. Main difference is the…
I have 2 geeetech 3D printers and ordered a few rolls of filament from them. After getting them and putting on the printer I soon realized that the outside of the roll would rub on the extruders and cause it to jump at times because the…
If you like it feel free to leave a comment or even better,buy me a "coffee": https://www.buymeacoffee.com/redangel1984 If you are looking for bracing/stiffener for your printer which uses 2040-AluminiumExtrusions for the frame, look no…
Compared to the original model, it consists of only one part, which makes it much easier to fit the coil. This adapter adapts to the inner diameter ID (70-78mm) of various coils. I have tested it with GEEETECH, Jay-O, Giantarm and Sunlu…
In this video I will show you how to change your 3D printer back from a problematic auto bed leveling (ABL) system to the reliable mechanical end stop switch. It isn't much work and requires you to only identify the GND and trigger wire…
I just got my first printer, the AD5X and know almost nothing about 3D printing or 3D design. I ordered a bunch of Geeetech filament and discovered the hole in the spools was way too large for the spindles on the AD5X. I downloaded 1…
Update 09.01.2020: I updated the lead screw nut hole to accept a wider range of lead-screw nuts, before the diameter was 22.0mm and now in V2 its 22.6mm. I also added some minor tweaks overall. (check out the gif on the bottom of the…
For the Bambu Lab AMS, it makes sense to use a spool weight for almost empty and very light filament rolls so that the spool remains on the rollers of the AMS while the filament is being fed. For example the spool weight with integrated…
To bring a new use for the empty Spool. I designed it for a Spool from "GEEETECH". Just need a drill to make a 5mm diameter hole. Enjoy!
I had a lot of trouble finding a fan duct model which worked on the late 2018 version of the Geeetech A10 - all the versions I found were too wide and didn't work. This is a reimplementation that's close to the original, with some…
For spool with inner diameter 75mm
Since I moved the LCD-Display and the electronics case to the left, I needed some end caps to cover the aluminum extrusions. It's a tight fit. The cap needs to be pressed firmly against the Extrusion. This way it won't fall off easily.…
I decided to make this genius model for free. I noticed with my Elegoo Centauri Carbon 2 that the GEEETECH spools don't really fit on the filament holder due to their large inner diameter, or rather, the retraction function of the holders…
This spool holder adapter is designed specifically for the Geeetech M1 and M1S to offset the spool position and allow the use of standard 1 kg filament spools, which do not fit well on the stock holder without colliding with the USB- and…
I design and print out a filament spool drawer system for my empty GEEETECH and GiantArm filament empty spools. Upcyle and recycle!
PETG or higher is better
A remix of my own remix of a Geeetech A10 fan duct. Print Settings Printer: Geeetech A10 Rafts: No Supports: Doesn't Matter Resolution: 0.2mm Infill: 15% Filament: Grosssiste 3D PLA Silver Notes: You can print on the flat surface or on…
This is a Afterburner-mount for a Ender-3 style printer. The mount does not use the original metal bracket, but the excentric nut is necessary. I have it running on my Geeetech A10 and it does it's job quite well. Feel free to give some…
I have owned my Geeetech Prusa I3 Pro B since November 2017 and have slowly been modifying it to improve print quality ever since. I have decided to combine all the parts into one complete package. So lets start at the top. LH Z AXIS TOP…
This a is file to help another file. Thingiverse no longer works so I am posting it here. This is the fan duct that this design supports. https://www.thingiverse.com/thing:3025565 Print instructions This is a holder for a part fan duct…
I saw several ideas in Printables and Makerworld, but nothing really convinced me. So I designed my own smart adapter. Problem was that they fitted too tight or too loose, adapters flying all through my shopfloor. Designed with TinkerCad.…
Dies ist ein Remix von @ Fava3D Glasbet Halter für Geeetech I3 Pro B ( auf Thingiverse / https://www.thingiverse.com/thing:3078196). I countersunk the holes for countersunk screws. thus the screws do not protrude over the glass plate. I…
Stronghero3D and Geeetech 74-75 mm inner diameter spool adapter to 54 mm diameter I was using an existing spool adapter to 8mm rod, but these were too large for my existing adapters. This was a quick model to adapt. This is to be used in…
On the first replacement of the FEP sheet the frame already appeared to be broken. Since it takes ages to get replacement parts shipped I modelled replacement frames that can be easily printed. I have printed the replacements using PETG…
Design Concept I bought some PETG filament from Geeetech and noticed they don't sit right in the CFS and have feed issues. All the spool adapters I found are for 200mm diameter spools. But these new spools I got are slightly smaller. I…
After having a bunch of problems tunning the stringing problems on my GeeeTech A30T, I found out that seems to be a common problem with the printer in question. After seeing a bunch of solutions relying on lowering the extruders from the…
The original design worked quite well for me, but I think it had too little airflow. So I increased the diameter of the nozzle-holes to 2mm. Works better now :) 2nd version with reinforced mounting holes. PETG recommended, PLA might bend…
Filament Roll Adapter for Geeetech Filament, fits these Lack Enclosure V2 spool holders: https://www.printables.com/de/model/3673-mmu2s-enclosure
Update 29.12.2018: Version 1.1 of Skorpion where the duct mount was thickened and the duct outlet was shortened to be a little more far away from the heater block Because the cooling on my A10M and A20M was not quite convincing, I…
A piece of the teflon tube needs to be inserted on the hole on top. The hole also needs to be drilled out with a 4mm drill bit.
Geeetech A30 Nozzle Fan funnel Print Settings Printer: Geeetech A30 Rafts: No Supports: No Resolution: 0.20 Infill: 20 Filament: Other PLA Category: 3D Printer Accessories
This Geeetech Mizar S filament guide prevents wear on your runout sensor walls. It fits directly into the sensor mount hole without any need for glue or hardware. I printed it at .2 with a 10% infill. No supports needed. Update: added a…
Easy printable. Print it without support. Tested 0.15mm, PLA
If anyone wants to build upon this, I would recommend to start with the Gen 2 version instead. This is a part cooling fan mount/duct, that I designed for lipki's direct drive extruder design: https://www.thingiverse.com/thing:2665491 This…
I really love the Drawer and also the stand made by 3D Printy. I just wanted another design for my stand so I made this one in fusion 360. Unfortunately I'm not into open scad so it is not parametized. I uploaded the f3d for you guys, if…
Another fan duct for the geeetech A10 v3. Remixed from a mazzoca design, I just made the output of the duct larger. Using a 5015 fan, there is now a sufficient airflow in my opinion (the 3D benchy does not have cooling problem anymore). I…
An adapter for Geeetech coils or others that fit. I decided to use the 50mm bamboo spools. I used that as a weight. https://www.printables.com/de/model/422882-spool-weight-for-bambulab-ams-spools The 3mf file contains all the data for a…
a replacement air duct for the Geeetech a10 pro. The fan is not very good, but this will at least replace a broken stock air duct. the fan is a 3 screw 4020, if you have been looking for a duct for this fan, you will know how uncommon…
E3D V6 Mount A10 A10M A20 A20M Designed to mount on the existing A10 X carriage, use two M5x30mm SS Hex head screws for more support / key instead of original dome head screws for top roller bearings, for quick removal and replacement…
This is fan case for two 120 mm fans which allows you to turn off noisy power supply fan (maybe, with this case, it is possible to turn off more fans in case but I didn't try). Print Settings Printer: Geeetech A30 Rafts: No Supports: No…
Here's my first iteration of the purge bucket for the Geeetech A20M. Installing this along with the tool changing script (tested on Simplify3D Only), will allow the purge to happen within the bucket instead of the printer printing a purge…
I love the Adjustable Spool Holder for Silica Gel / Spool Weight by humebeam but it will not fit with Geeetech spools. So i made this adaper. Print 2 pc. and then you can use the Adjustable Spool Holder for Silica Gel / Spool Weight with…
ORIGINAL (Thingiverse) Carriage for V6 hotends with bowden or direct drive orbiter extruder. Requires 2 4010 blowers 1 3010 axial fan 2 M3x20 bolts 2 M3 hex nuts Category: 3D Printer Parts
These feet fit on 3D printer with 40 mm aluminum extrusions like Creality Ender 3 or Geeetech A10. For the silicone parts I used 2-component silicone from "Troll Factory" (Germany) which I also used for some silicone socks and heatbed…
Mit zwei Adapterringen lässt sich der Durchmesser von GeeeTech-Filamentspulen auf den exakten Durchmesser bringen, den die Creality-RFID-Filamentrollen haben (200 mm), damit diese dann korrekt in die Creality CFS-Box passen. Zusätzlich…
Eignet sich hervorragend als erster Druck und für eine Mustersammlung! Man kann das Modell individuell anpassen, ich habe schon einige Vorlagen für Filamente, die ich besitze erstellt. (Prusament/ERYONE/Redline Filament/Filament…
In this remix I just edit for make support compatible with: https://www.amazon.it/gp/product/B085ZM19QC/ref=ppx\_yo\_dt\_b\_asin\_title\_o09\_s00 To use it I decreased the acceleration of the extruder to 400. The printer is stable at up…
In cura use a small coustom support cube for the part where the fan slides on while everything else don´t need support. Depending what you want to print i recommend PETG or ABS and if you don´t have a housing for abs you can use a draft…
It fits on the original metal bracket of the Geeetech A10, but maybe also on other 3D-Printers like the Creality Ender 3. Filament change is a bit more cumbersome than with the simple plastic tube that came with the A10, but the spool…
a simple cover against resin odor, dust and as additional UV protection
A replacement for the spool holder in the Mizar Pro 3d printer. The thread it's 30 mm diameter, so basically usable where it fits, not in particular for the mizar pro. I printed it as test at 0.3 layer, 2 walls with a really bad PLA and…
Geeetech A10 Fan Duct - Work in Progress! Since the original Geeetech radial part cooling fan has been extremly loud and the original duct hasn't been ideal too, I tried to improve the duct. This makes the printer a lot quieter but not…
Both sx and dx top bracket upgrade for Geeetech i3 Pro W/B/C
Better fan for the Geeetech A20(M) Parts needed: -5015 fan -2x M3x25 Print the duct with the large side facing the buildplate.
I started using Prusa Slicer a lot more in the past few weeks with great results so i thought i make it look better. For each of my printers i added a custom build plate. This improves looks and it also makes it easier to see what printer…
Hi guys, you maybe know my issue... You brought a 3D Printer with a dual extruder and after printing numerous cats, geckos, and traffic cones you're trying to find out what you should do now with this machine. I tried to figure out what…
Filament spool centering ring / adapter ring from 75mm to 51mm, for MMU Auto Rewind Spool Holders.
Filament holder for Geeetech i3 Pro B Print Settings Printer: Geeetech Prusa I3 pro B Rafts: No Supports: No Resolution: 0.2 Filament: Standard 1.75mm PLA PLA Category: 3D Printer Accessories
I remixes some file to use my old geeetech A10M parts
The 40mm fan on my Geeetech A20T broke, and it is hard to find this 40mm fan in 24 volts. The 5015 50mm fan is far easier to get in 24 volts, costs far less, pushes more air, and is far more robust. This duct also reduced stringing by…
Geeetech Prusa I3 Pro B Dual Belt Clip for X Axis . Original design from Geeetech that comes with your printer. Category: 3D Printer Accessories
Satsana modified for Geeetech A20 with the wall to mount the board
I have since a while switched from a direct extruder to a bowden extruder that I have mounted in the middle on the top of my frame. Now this posses the problem that the LCD screen is not able to be mounted at the top of the frame anymore,…
Either clip works great. I used PETG, 0.15 Quality, 20% Infill. Love the Prusa company & team. Unfortunately for my location, the Prusament shipping costs make it a bit out of my budget.
Mounting instructions can be found in the PDF in the file section: <------ If you like this mount please use the "TIP DESIGNER" button and leave a tip for a hot or cold beverage. you can also use the link:…
01/05/2020 Update: I added a bigger screw and a rise for the Z level. Not sure about others but I always had problems that the screw was to short and difficult. With the rise there is now more space and the screw is easy to adjust. For…
This is my recreated version of the original fan shroud of my Geeetech A20. I modeled it after the original fan shroud broke. It snap fits into the hole of the fan and can be additionally locked with the screw. I removed the curve on the…
A Holder for the Standard Tools from Geeetech Printers and for a few Nozzles, a caliper and a socket wrench, to mount e.g. on a Ikea Lack Table Print Settings Printer: Geeetech A10 Rafts: No Supports: Yes Resolution: 0,3 Infill: 10%…
Simple holder for all your cables. Mostly useful after switching to direct drive. Should fit many 3D printers
Just a simple tray on which you can place your resin vat without having to worry about getting your FEP damaged.
Remix from Geeetech I3 Pro B BeltClip X Carriage by Bebop182. With my remix go your belt strait and do not have a turn. Category: 3D Printer Parts
A reupload from Thingiverse as i could not find it anywhere else, Works well and prints easily with supports for centre pieces.
Printed on "the back" in order to have strong fixation points (need support in this case). Not just a shell, I tried to make a strong part. Fit geeetech A10 V3 maybe better to print it in ABS or PETG because it can lose shape in case of…
A very simple 3x2 holder for the GeeeTech JT16 glue sticks, popular for bed plates that use PLA. Other glue sticks with a 30 mm diameter could also fit. Contains a label on the bottom.
Reduction for geeetech A10 from bowden extruder to direct extruder using only printout and two screws.
I started using Prusa Slicer a lot more in the past few weeks with great results so i thought i make it look better. For each of my printers i added a custom build plate. This improves looks and it also makes it easier to see what printer…
Purge bushing for A30T. I used different files but didn't want to unscrew the bolts on the Z-axis, so I matched the X-axis motor cover with a 10mm limit switch offset and a basket. I changed the nozzle to stainless, but it is longer than…
GEEETECH has some thinner, taller rolls with a huge hole in the middle. They definitely need an adapter to use @GunplaMark's Filament Storage 2026! Measurements for GEEETECH rolls: Hole Diameter: 75mm Spool Width: 57mm
Upgraded my Geeetech A10M Y carriage to an New Ender3 type to reduce mass. Due to the roller mounts being further apart i had to create a new mount for Y axis end stop limit switch. (see y carriage photo RED and YELLOW circles show the…
I've spent several hours slowly chopping away at the original Satsana model for the Ender 3 to fit it for this printer. The original design doesn't even remotely fit the Mizar S, so a lot of work went into trying to move parts around and…
11/26/2020 Update: V3!! (Green) Fixed part that was touching M5 screws, Added mounting point for 40mm fan As i accidentally destroyed my Geeetech A20m hotend trying to unclogged it. So i'm designing a mount / backplate for the Bigtreetech…
It does not need anything extra to be installed, in my case it has reduced the sound of the fan. Print Settings Printer: Geeetecha A10-v4 Supports: Yes Resolution: 0.2 Filament: PLA leon 3D PLA Category: 3D Printer Parts
Hi friends,, I recenty changed my original Geeetech hotend. I replaced it by an e3dv6 direct drive. It was necessary to print new mount to use it. My mount had to : be usable with the original X Carriage of Geeetech have a cable manager…
Now compatible with the SKR3 (non EZ version) and Prusa MK3 frame. If you like my design and want to use it on different frame, just contact me and provide the hole spacing, I will make sure to update the design for you.…
This is a filament guide for Geeetech Mizar S 3d printer.
Desgined it because all other parts I found didn't fit good enough or are too low and crash into the paper clip that holds the print bed. Update 2016-10-02: I had an issue with my printer, caused by the cooling fan which blows the air…
For those who want to use a circular fan and a BlTouch sensor at the same time on a MK8 i3 Extruder. Successfully sliced with Cura 2.3.1 and printed with Anet A6 for a Geeetech Prusa i3 pro B. Print Settings Printer: Anet A6 Rafts:…
I wanted the display of my Geeetech I3 Pro C to be positioned in front of the heated bed like the Prusas. I needed it off the top of the printer to accommodate my soon to be uploaded, dual filament spool mount. I wanted for this mount to…
This is to replace the aluminum Y axis belt connector on my Geeetech I3 Pro C. The idea of drilling holes in a toothed belt for attaching it with screws to anything just seems a bit cheesy. Adding to the cheese factor that belt tension is…
Let the excess resin drip-drip-drip after printing the model. The bracket is inspired by the vindolin's model , but made from scratch for Geeetech Alkaid. Tweaked for optimal plate angles and position to fit both the plate and the printed…
If you're here, you know why. Step and f3d files attached for the inevitable mods you'll need to do for your situation. This whole carriage weighs 900g, but it hasn't had too much negative effect, and is a trade-off for a functional…
Geeetech A10 LCD-Display Back Cover - This maybe also fits on Creality Ender 3 There are a lot of these covers for the A10, but if you are using my "LCD Display Holder Left Side": https://www.thingiverse.com/thing:4098947 these covers…
My previous design had an issue, where the homing could fail violently, because the carriage, which has the thing that triggers the endstop, would stop at the bed, while the wobble fix would continue to go down until it was tightly…
I designed another fan duct before, but this didn't work as good, so I did this and this is awesome. Designed for 40 mm fan (files without diameter in name) and 50 mm fan. Update 2017-07-22: New version (v4) for better cooling results. At…
I know there are loads of mods available to fix the Geeetech Prusa i3 Pro B wobbly Z-Axis but I prefer to design and print my own so I thought I would share my design. I have designed a replacement i3-08 top plate with an oversized hole…
After printing Seltix's top motor mount for my Geeetech A10 ( https://www.thingiverse.com/thing:3724186 ) I needed to change the position of my spool holder to align it with the extruder motor. You'll need 2 more 20mm M3 screws and nuts…
PLA Supports yes Layer 0.2
This may look like overkill with the 3 bearings and maybe it is, but it works really well :-) Whether the filament comes from underneath or above the printer, you just need to turn the arm with the pulleys in the right position. When you…
