Unterlegkeil mit Halter 1:14
Unterlegkeil mit Halter Halter kann mit M2-Senkkopfschrauben verschraubt werden.
Print approx. €0.35–€0.42 excl. taxPreliminary estimate for one variant
- Downloads
- 478
- Likes
- 38
- Rating
- 5
456 models
Unterlegkeil mit Halter Halter kann mit M2-Senkkopfschrauben verschraubt werden.
Print approx. €0.35–€0.42 excl. taxPreliminary estimate for one variant
Print at normal speed with a dark color PLA. Light can pass through white PLA and cause lens flare. The file has the correct orientation, print w/ organic supports. Will require some very light sanding. This may fit into other cases that…
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
🇰🇭 សមសវគមនមកកនបរទសកមពជ Welcome to Cambodia! Angkor Wat (Khmer: អងគរវតត , "City/Capital of Temples" ) is an enormous temple complex in northwest Cambodia, and the largest religious monument in the world ! It was built by the Khmer King…
Simson S51 Werkzeugkasten Der Werkzeugkasten setzt sich aus folgenden Bauteilen zusammen: der Kiste selbst dem Deckel einem Briefkastenschloss 4 kleinen Kabelbindern Das Schloss sollte einen Durchmesser von 16 mm haben und einer Länge von…
I created some funnels with different sizes of threads/screws that you will find on fluid cans for antifreeze fluids (car) windshield cleaning fluids (car) engine oil (car, motorbike) gear oil (car, motorbike fork oil (motorbike) … The…
This is made for the Gulikit KingKong 2 Pro controller. I have not tested it with their other models, but it might work with them too. Main Features Pass-throughs for the back buttons (turn off, switch modes, pair) A hole for the charging…
Device for 45-degree chamfering of plasterboards in drywall. Small and convenient to useAll trapezoidal blades up to 62mm fit. Chamfer width +- 6mm. The nut works easily after the first screwing in. In the slicer, the model must be…
Sling Kontrol V1.1 "by" Qwerm A shameless ripoff of Subrev's Sling Control, a picatinny accessory that helps store your sling when not using your rifle. Changelog: -v1.1 Added looser fitting versions of the snap on version in order to…
This is a functional model of a Scharfenberg train coupler in the style of a fidget toy. https://en.wikipedia.org/wiki/Scharfenberg_coupler This is optimised to be printed with no supports, 0.2mm layers, a standard 0.4mm nozzle, no brim…
ยินดีต้อนรับสู่กรุงเทพ Welcome to Bangkok! This entry includes 2 versions: No supports: split in halves, print each one lying down with the flat side on the print bed. You must glue after. Supported: print as regular, standing up, with…
This adapter fits on the Bosch GKS 18V-57 circular saw. It slides over the back and then attaches with a screw on the front. So it won't come of the saw. If you wan't to use the screw on the front of the saw to attach the adapter you need…
Width 207.40 mm Height 80.00 mm Depth 105,00 mm Simple tool box with receptacles / compartments for e.g. calipers, precision knives, tweezers, pliers, spatulas and other tools and accessories that you like to have on the printer. For…
MY PRINT SETTINGS Ender 3 compatible, Printed on ender 5 plus CURA SETTINGS 0.2mm layer height 0.6mm nozzle yes supports, 5% density, 45 overhang angle yes adhesion, Raft 15 infill gyroid infill pattern
Modular router plate for the Bosch GKF-12V. Highly inspired and based on thing 3707881 by EpicFazer. I wanted a plate that I could use for different purposes, without having to disassemble the entire thing every time. It also has the…
J'ai réalisé ce modèle car les modèles proposé qui consiste à poser le plateau sur le bord du bac ne me convenait pas, je trouve ce système bien plus pratique à l'utilisation. Vous pouvez le verrouillez à l'aide de la gâche du dessus et…
The Tingkat is a stackable HEPA filter and acid-free activated carbon (pellet) air scrubber is designed from scratch up for the Creality K1C. It should work for the K1 and K1 Max as well. Less the mounting base, the Tingkat measures 116mm…
I have this battery-powered saw, which is pretty good but had one big flaw. The dust collection adapter didn't fit the standard 35mm diameter hoses. Not even the hose from the Bosch vacuum. They always came loose. I don't have any other…
Hello, A Bosch GKF 12V-8 is a little bit challenging for milling a circular holes. None of the jigs for circles fits it. Therefore, I designed my own jig. The input requirement was a wide range of radius - usable for small tweeters and…
90° curved fan shroud for 60mm, 80mm and 120mm fans. Printed with PLA and 0.2mm. For a nicer surface on the top, 0.15 or 0.1 is recommended. 90° gebogene Lüfterhaube für 60mm, 80mm und 120mm Lüfter. Gedruckt mit PLA und 0,2 mm. Für eine…
Remixed to support KK3 Max. Holds the phone using a rubber band. Does not block any controller features. Switch support
This model is based on the design of Ikea Skadis Xbox Controller Holder from Norm . I needed to change the inner radius for a better fit with the GuliKit KingKong 2 Pro Controller. In addition all edges now feature a radius, which…
This is a connector bracket for Ikea’s Lagkapten and Linnmon desk system. It allows you to connect two of the desks together side by side using the existing pre-drilled holes. The bracket is compatible with both Adils and Olov legs and…
Created a little and simple screwable mounting bracket for Parkside X12V charger. Print with 3-4 perimeters, 0.2mm layer. Designed for PLGK 12 A3 but maybe it will fit other chargers It is best to print it standing up as it is in the file
I made the Tingkat - Creality K1C HEPA and Active Carbon Filter Air Scrubber some time back to filter air particulates and VOCs but I felt something is missing. The 60mm fan at the back of the Creality K1C/ K1 is exhausting the chamber…
Mund und Augen des Kürbises es müssen mit supports gestützt werden. Der Stiel des Deckels muss ebenfalls gestützt werden ----------------------------------------------------------------------------------------- The pumpkin's mouth and…
💖 Support Me If you like this model and want to use it for commercial purposes , you can support me on Patreon and get a commercial license https://www.patreon.com/cw/MonsieurPierre This cute and detailed figurine represents Jungkook in…
Vertical stand for Trigkey/ Beelink mini PCs. The PC slides in from the front. Feet are optional and should be made from TPU.
This router base for the GKF18V-8 gets you a two hand operation of the router for more control when chamfering your workpieces. Furthermore you get a swiveling dust catcher, so the chips that are flying from the router bit get stoped and…
I've shortened the model a bit (so that the build plate can be placed on the edge of the vat, instead of putting it inside), and enlarged its height by around 4mm so that users with new FW won't have to do anything apart from installing…
Official german traffic signs from 274-5 (5 km/h) up to 274-130 (130 km/h) in original size of 600 mm. You'll need a multicolor capable printer or use different element heights with filament change in between. At least 3 colors. The mf3…
Holes for screws are 3mm in diameter. Print Settings Rafts: No Supports: No Resolution: 0,3 Infill: 10 Category: Tool Holders & Boxes
The model represents the Seiffen Church, or as it is officially called, the Seiffen Mountain Church, and is an Evangelical Lutheran church in the municipality of Seiffen in the Erzgebirge district of Saxony. It is the town's landmark and…
Bosch GKF 12V-8 Fräszirkel in der Länge (Radius) verstellbar. Ihr wollt große schöne Kreise fräsen? Keine Lust auf Stichsäge? Kreise bis knapp 2m Durchmesser sollten kein Problem sein. Die kleine Platte kann über drei (oder sogar mehr)…
This osVAC adapter fits the Bosch 28mm dust extractor connection. Tested on my 12V circular saw and on the multi cutter (Stichsäge) and GEX random orbital sander. There are two versions of the adapter, a larger one where the osVAC…
A circle cutting jig to cut circles from 80 mm diameter to 300mm diameter (minus half the radius of the cutting tool). It has a adjustment slider to set the radius, and a split adjustment to allow for you to set the radius and move into…
Guide rail adapter for the Bosch GKS 190 Professional circular saw. For inspiration I used “ Bosch GWS 10.8V / 12V Guide ” by @ HAMMER_T . The design is for a 50x30x3mm aluminium profile…
Konvertere en IKEA TRÅDFRI ON/OFF knap til at ligne en FUGA IHC Wireless vægkontakt. Ingen lodning nødvendig. Jeg sælger ikke disse kontakter, men en lignende løsning kan købes hos LAB3D . Dele du skal bruge 1 x Indsats, vælg imellem 4…
A quick and dirty remix for the GKT 18V-52 GC to direct connect a dust extractor via C35. It‘s designed to fits into the L-BOXX. Printed in PETG with 15% infill and a Resolution of 0.15mm. Other settings should work as well.
I have an IKEA desk made of LINNMON and LAGKAPTEN tops and ADILS legs. It's great, because it was cheap. It's also terrible, because it was cheap. The first problem is that the $5 ADILS legs are not uniformly constructed. Specifically,…
I remixed Manabun Lab's Controller Stand because it was amazing, while respecting the design to make it suitable for a GuliKit Kingkong 2 Pro Controller. Honestly I did this quite quickly and and it's a bit sloppy but the final print…
Simson S51 - Werkzeugkasten hinter Herzkasten
PETG ; 15% Infill ; 0,15mm
Intorior door handle for Hyundai Coupe/Tiburon/Tuscani GK 2001-2008 Copying the design and printing it was cheaper than buying a new one from dealer, so maybe someone else will have a use for it. For UK and other left hand driving…
I used the predesigned connector von Boschlike over on Thingiverse: https://www.thingiverse.com/thing:4845838
This custom-designed wall mount is specifically tailored for the NRGkick mobile charging unit. It provides a safe and snug fit to hold the charger vertically on a wall, keeping it off the ground and protecting it from damage or dirt. The…
This model is a base plate for Bosh GKF 550 router. It is designed to be as close as possible to match the original base plate mounting system. The stl file is large, that's why I also put the editable version. In the back, the hole must…
Just the case to run OpenIPC based FPV stuff check https://qczek.beyondrc.com/building-openipc-fvp-gears/
This connector is a really nice design. I wanted to use the original IKEA screws, so I shortened it from 10mm to 6mm and inset the screw holes to 3mm. If you're planning to use this without legs, the thicker original is probably better.…
The print is very easy to make. To supports are needed. Place the hole on the plate. You can use https://www.amazon.de/dp/B07JG9QZ2B?ref=ppx_yo2ov_dt_b_product_details&th=1 as sensor. ######################################### Der Druck…
Das ist ein Remix von https://www.thingiverse.com/thing:4689768 Danke an den Ersteller des Originals. Ich habe den Wandhalter für die Bosch GKS 12V auf drei Befestigungslöcher geändert.
Wall Hanger Bosch GKF 12V-8
A small 1:10 tool box for workshops, as a decoration for crawlers or similar. Be careful when assembling, do not tighten the screws too tightly, otherwise the bars on the lid and hinges may break. The last picture shows where which screws…
Wandhalter für die Bosch GKF 12V. Der Gabelschlüssel kann seitlich eingesteckt werden.
Collection of metric bolts, available in sizes from M6 to M16, with multiple lengths. Reinforced by standard wood screw By curiosity I’ve conducted strength tests to evaluate maximum torque and tensile strength, I've tested M10 bolt. Bolt…
Here a little test to measure the precision of your 3D printer. Hier ein kleiner Test, um die Präsision Deines 3D-Druckers zu testen.
Right bearing roller clip for GK420d & GX420d thermal printers. The original was too tight for me so I widened the hole a bit. Original can be found here: https://www.thingiverse.com/thing:3689058 If you're looking for the left clip, you…
Français: J'ai créé ce modèle de couvercle pour le bac à résine de mon imprimante GKTwo, car le couvercle d'origine était cassé. English: I created this lid model for the resin tank of my GKTwo printer, as the original lid was broken.
Danke an Yanev, er ist ein Profi in Fusion 360 / Thanks to Yanev, he is professional in Fusion 360. Material: PLA+ Druckereinstellung: Layerhöhe 0,2 mm / Infill 10 % / No Support Zusätzliches Material / additional material: 6x M4x35mm…
🐸 Grumpy Frogkin – The Swamp Has Spoken! 🐸 Meet Grumpy Frogkin — the grumpiest little creature to ever crawl out of a haunted pumpkin patch! Few supports are needed. I used organic-style supports, which peeled off cleanly with minimal…
Da mein Staubsaugerschlauch nicht in den beiliegenden BOSCH Adapter passte und ich eh gern ein Ersatzteil haben wollte, habe ich mal einen Adapter von Null konstruiert. Ich habe euch die Step Datei beigelegt, damit ihr es an euren…
My design for a screw on wall mount for my Bosch Professional GKS 18V-57 saw. No Support is needed, this is why it comes in three parts. The table it self to put the saw on and the mounting bracket (you need two of them). After printing…
Eine Austauschbodenplatte für die Bosch GKF 12V-8 Kantenfräse um die Fräse von unten an einen Tisch, in meinem Fall Bosch PWB 600 zu klemmen. Die Klinge wird nicht verdeckt, ein Anschlag kann auf ein Holzplatte mit passendem Ausschnitt…
☸ 🪷 Reclining Buddha A reclining Buddha is an image that represents Buddha lying down and is a major iconographic theme in Buddhist art. It represents the historical Buddha during his last illness, about to enter the parinirvana . He is…
This has 5 parts: the Switch mount, the controller clamp, the arm (the one in photo is the 40mm) and 2 bolts. Mount and clamp need supports, try to not add supports at the clip part of the clamp. Features: High degree of freedom movement…
Simple adapter for connecting 100mm exhaust pipe instead of filter. Just hotglue magnets (15*8*2mm). Printing without supports. ---------------------------------------------------------------------------------------------- Jednoduchý…
This is a model of a NGK ZKR7A-10 spark plug from an old Voxhaul (Opel) Astra engine. I know this is not true to the real thing inside but externally is it as accurate as I could get it with a pair of veneers. If you want to print this…
---------------------------------- 18th July 2023 Update: The latest version of the GKTwo firmware (and latest machines shipping) now have a build height of 250mm instead of the 245mm. So you will need to drop the build plate by 5mm to…
I needed to cut a circle but only have a Prusa Mini+ to print on and shortening the length of mrjoda's model to fit my bed meant I couldn't cut large enough circles so instead I re-combined the pieces together and then broke them into…
Staubsauger Adapter von Bosch Handkreissäge GKS 18V-68 C auf Kärcher WD-Familie (WD4, W5 usw.) der Griff vom Kärcher muss “weggeclipst” werden und der Adapter aufgeclipst. es bleibt weiterhin drehbar. Support wird benötigt aber leicht zu…
Holder to firmly secure your NRGkick charger on the wall while using it at home. With two simple snap hooks you can open it and take it for a ride if needed. You will need 2 M3x30 bolts and 2 M3 threaded inserts (I used Ruthex inserts…
A simple friction fit hook for IKEA Lagkapten tables to hang your headphones off of. Print Settings Printer Brand: Creality Printer: Ender-3 v2 Rafts: No Supports: No Resolution: 0.2-0.4 recommended Infill: gyroid recommended Filament:…
This model is replacement base plate for Bosh GKF 12V-8 router (equivalent to ref 1 600 A00 N9C). It is designed to be as close as possible of the original base plate. Autodesk Fusion 360 file is provided if you want to make so…
For Halloween, our children need a cool new box for their sweets. That's why I created a child-friendly Halloween box in the shape of a coffin with a skeleton and a comic-style pumpkin head. When the head is upright, the lid is closed,…
My dad got a “dust funnel” broken on his Einhell pull crosscut saw 2354. I have the small version, but the rod funnel is identical. So I designed the part for print. It ensures that the saw dust is directed into the catch bag. Printed in…
Bigger Base Plate for the Bosch Professional GKF 18V-8 Should be more stable with it. Original plate is very small. Printed in PETG and PC Carbon. Both seem to be stable. Attached also a file with the original size of the plate.
Ein Gleiter für die Bosch GKS 12V an einer Führungsschiene FSN 1100 von Bosch. Drei Teile: Gleiter.stl - Der Gleiter für die Führungsschiene (siehe Bilder). Dieses Teil benötigt Support! Verschr-OS.stl - zwei mal drucken. Wird an den…
Used a 0.6 mm nozzle. Hexagon hole for attachment might be a bit bigger or smaller depending on printer tolerance. attached a step file so hole can be changed to fit Category: Gadgets
Left bearing roller clip for GK420d & GX420d thermal printers. Couldn't find a clip for the left side of the roller so I converted the existing right clip into a left. While the original listed here;…
Die winzige Fingermulde im Originaltuningknopf ist auch für kleine Finger ungeeignet. Dieser aufsetzbare Kurbelstift hält ohne weitere Vorkehrungen bereits mit leichtem Druck selbstständig auf dem Originaltuningknopf und kann auch…
Bottom End for Stringking Lacrosse Shaft. Perfect with Stringking A175 shaft, but should works with other StringKing shafts too. Adjust Z axis as you prefer, but this should be good as it is
This super expensive Bosch GOF 1600 router has a super unusable vacuum adapter. Which on top breaks easily. This one is hard to destroy. The router can be used almost to minimum depth. OSVac fits directly. Print with PETG, 30% infill, 0,2…
Remixed a stand to fit a NiPoGi GK3Plus Mini-PC. I included tree supports in the provided 3mf already, recommended to use them over regular supports.
Diese Einteilerboxen unterstützen die Ikea Kallax Schublade zur Nutzung als Werkzeugkasten. Dabei hatte ich eher Werkzeuge für Elektronik und für den 3D-Druck im Blick. Die Einteiler sind in zwei Ebenen unterteilt. Die untere Ebene ist…
A replacement part for the rear feet of the Sharkoon Skiller Mech SGK3 keyboard. The original feet start to crumble after a few years. This replacement was designed as close to the original dimensions as possible. They nicely snap into…
I did not like the The Tork Craft router table method of connecting the router. Therefore I created a adaptor. I used: 4x M4x16mm to connect the router to the plate. 3x M5x20mm, a washer and wing nut to connect the base to the table.
I needed a rack mount for the Trigkey but couldnt find anything suitable. The Beelink S12 Pro was incredibly close in scale. I printed that out but found that the dimensions were off by millimetres. I went ahead and remixed that rack…
Ringkorne von 3,8-4,2 mm, 0,5 mm hoch, am Besten zu drucken in 0,1 mm Schichtstärke. Passen in die gängigen M18 Korntunnel bspw. von Walther oder Anschütz.
This is a dust collector for the Bosch GSK 12V hand circular saw. Unlike the included dust catcher, the connection for the vacuum cleaner is directed upwards. To attach it, use the same screw as the original part The diameter for the…
Gridfinity bin for a Jangklife rotary tool and its accessories.
I made 2 versions: 1- without using the original rubber, 2- in which I used the original rubber from the broken leg. Requires supports. I printed on a layer of 0.07mm. It came out very nice.
please like, share , and follow if you want im upload anymore
These are the add-ons for Double Stack Glock and Desert Eagle magazines for this design: https://www.thingiverse.com/thing:4666142 (not sure if he/she already moved over here as well)
The hex mount is designed hold the rip fence of the small 12V circular saw in the lid of the Sortimo/ L-Boxx. The holder is printed without suport and 15% infill. In the slicer file, the “bridge” has a higher infill (30%)
Edit : it's for a L-Boxx 136 Bosch didnt provided insert when you buy the GKF in box. The only one insert is with the GHO I draw it with sketchup i Cuted the stl in half and in 4 parts, so you can print on small printer If you appreciate…
Print with z axis along the rotational axis of the latch. Use supports. From my experience, it takes a good amount of force to install. Align the spring as shown, insert one pin/side first, then push. Note: I don't have a Honda Jazz so I…
OsVac M32-Adapter für Bosch GKT 18V-52 GC / OsVac M32-Adapter for Boscht GKT 18V-52 GC
Adapter to connect Miele vacuum cleaners to the Bosch GKS 18V-57 G circular saw.
I started using ABS and PETG a lot in my prints and started noticing funky smell during and post print without realising that these filaments give off some nasty fumes. Previously I conceptualised and came up with Tingkat - Creality K1C…
Danke an Yanev, er ist ein Profi in Fusion 360 / Thanks to Yanev, he is professional in Fusion 360. Material: PLA+ Druckereinstellung: Layerhöhe 0,2 mm / Infill 10 % / No Support Zusätzliches Material / additional material: 6x M4x35mm…