Compact wrench for nut for cable gland
In fact a Fusion 365 exercise, but I had adapted it to a useful tool, at least for me. :-)
- Downloads
- 63
- Likes
- 6
- Rating
- 0
382 models
In fact a Fusion 365 exercise, but I had adapted it to a useful tool, at least for me. :-)
PG36 threaded blind stuffing to close unused PG36-openings in housings. Adapter for (1-3)xPG9 cable glands for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. [1] Thread types: PG thread…
Pasacables para agujeros de 37.5 mm de diámetro.
Looking for mounts for PUG ? Thanks to all users who create mods to run PUG on their machines. If you've designed a mount for PUG that isn't listed below, contact me and I'll add it. Alternate PUG: by pixel shock by nhchiu Toolhead : by…
What and why? Since i have been asked about my other design of cable glands if it could be available in other sizes, I thought about in and designed a parametric model. This didn't take long. Exporting the stl for all sizes was a bit…
Bring medieval flair and rolling power to your tabletop games! The Vogland Castle Dice Tower prints support-free and delivers epic rolls for Dungeons & Dragons, Pathfinder, and other RPG adventures. 🏰 Designed for fast, easy printing — no…
These glands can be printed in standing position. low layer thickness and good cooling is really helping a lot with resolution of the threads. But it is also designed to work with medium print quality. even bad stringing should be ok with…
This is a remix of jphalip's Voron 2.4 A Drive PG7 umbilical mount, which was a remix of Hartk's PG7 mount. The endstop carrier in jphalip's model was from Minsekt . In this version the PG7 hole location has moved slightly to be centered…
This is a remix of MrTeliP and Voron 2.4r2 PG7 Cable Gland and Endstop, which was a remix of jphalip's and Hartk's PG7 mount. I added a new endstop mount so you don't loose any Y print area. The bumper of this mod from Cris Persi is…
Simple replacement cable cover for the A drive of a Voron Trident to accept a PG7 cable gland for a CAN umbilical. Its a little wider and has screw-in threads for the common PG7 cable glands which are big enough to allow a genuine Molex…
Cable Gland designed to be installed on cables with plugs attached. The design includes a feature to center the gland in holes bored to fit the cable plug. An o-ring groove is also included to prevent the cable from moving inside the…
Color change is as follows navy blue, red, gray, white.
Not so much a remix as it was inspired by PushingPixels ' PG7 Cable Cover as the CAD is my own, but the credit definitely goes to PushingPixels for the concept. This is an adapter for a CAN umbilical to mount to the gantry using PG7cable…
Welcome to Stonehenge! This model was created by Artemio García , available also in MMU version. Stonehenge is a prehistoric monument in Wiltshire, England . It consists of a ring of standing stones, with each standing stone around 13…
***Important update*** I uploaded the wrong file so please redownload if you grabbed files before 2024-03-04 There were a couple things I didn't like about the original design. I found the walls of the gland threads had unusably thin…
I created customisable model of desk cable grommet for custom diameter and height. Currently I publish here the ones for hole diameters: 30, 35, 50, 52, 55, 60, 64, 65, 68, 69, 70 and 76 mm and 18 mm desk If you need another dimension,…
This is a cable gland mount that replaces the Stealthburner chain mount with a facility to attach an M16 or optional M12 cable gland. I've been using this on my Voron Trident with a Huvud CAN BUS setup and has worked really well. You can…
🇬🇧 Welcome to London, UK This model is offered in different versions, depending on what you want to try: print-in-place - suited only at larger scales or resin separate pieces (use a standard 1.75mm filament piece as an axle pin) lastly,…
Saw there weren't many printable options for the PG7 gland used for CAN BUS. I instantly though of sprongos. You have to run a blade to separate the helix cut. It's pretty shallow. You might want to put a dab of super glue at the…
Print with Voron default settings. If you get problems with your threads, use higher fan speed. Don't forget the heat inserts from the original model.
BOM Printed part 1 x 1 Printed part 2 x 1 Pan head self-taping screw M2.5x6 x 2 I want to use existing mount designs but my Voron 2.4 kit didn't come with PG7 cable glands and I don't feel like purchasing any. They're easily printable and…
A 2 parts mount for people using BTT SB2240/SB2209 CAN Bus board that are also using PG7 for strain relief. I didn't want a bend in my cable, so I made this from scratch. Note: I do not use a cable cover (didn't want extra weight) so the…
Remix of Alexander Þór's M12 Gland mount , with a PG7 thread rather than M12 (allowing a smaller strain relief gland to be used). Also adds a slot to slide the cables in through. This can be secured with an 8mm M3 SHCS screw and heatset…
Add brutal cavalry power to your tabletop army with this 28mm Orc Hogrider - straight from the world of Vogland! This highly detailed miniature features an enraged orc warrior riding a snarling hog, designed for fantasy RPGs, wargames,…
This is a remix based on the NUT JOB factory https://www.thingiverse.com/thing:193647 The gland size is control by these three variables. gland_inner_diameter = 10; // The diameter of the inner channel. the outer size is always +5mm of…
I needed an anchor to mount a PG7 size cable gland to 2020 extrusion for my VORON Legacy build. It serves as the static position for umbilical setups. It allows belts can be run between the anchor and frame. Hardware needed: 1x M5x8 SHCS…
For people who like this sport :D (On Tinkercad - don't know creator)
Last Updated on 28/03/2020 JJ/MM/AAAA -added STEP -added hexagonal base for the screw This is a scew on fiting for cables, ranging from 5 to 13mm. The nut is 28mm wide Be carful with your settings, especialy horizontal expantion (for me…
M12x1.5 nut M12 cable glands need a 17mm wrench for the nut and a 15mm wrench for the gland itself. If you're operating in a tight space, a 15mm nut might help! If you need a specific size and you're not into FreeCAD that much, let me…
On my Voron 2.4r2 i have an BTT EBB36 v1.2 installed. Since the board is mounted on the back of the LDO Nema 14 stepper behind a ClockWork 2 the cables came extremely close to the drag chain when homing. Also the wires were exposed on the…
Forgot to order these when I made my order for canbus on the v2.4 so modeled up a printable one. Strain relief section was printed in tpu while the body is abs. The stud is glued and press fit into the upper nut. The strain relief is…
Add muscle to your orc warband with this battle-hardened warrior from the world of Vogland! This 28mm fantasy miniature is designed for tabletop RPGs, wargames, and display builds. A perfect fit for any orc horde, enemy faction, or brutal…
Complete set of M20 cable glands for 12mm and 15mm inner diameters, including 2-7-wire inserts (1.5mm² & 2.5mm² versions), reducing inserts (3-13mm) and a gasket for reliable sealing. Also includes an M20 plug compatible with the gasket…
3cm x 5cm emblem of the Union Jack Flag.
If everything goes according to plan, this is the first of several Umbrella Gland Plant models. New models will be uploaded separately. However, I'll also add them here. This is a younger one. A few weeks later it will grow higher and…
Adapter to mount a D-Type Socket safely in rack with strain relief. M3 heat set inserts for safe and easy mounting. For racks or just use it for your own adapter. Fits a PG9 cable gland
This is a collection of metric lock nuts (counter nuts) for cable glands , designed for use with standard metric cable gland thread. The nuts are intended as replacement or custom lock nuts for control cabinets, junction boxes,…
Since I am a poor grad student buying umbilical glands after a voron kit was just too much. Also, I had already connected my wires to the board, so I wasn't about to undo those million zipties to re-route them through a gland. Enter PUG-…
All the models I could find that used " PG Cable Gland M12 " for the SB 2240/2209 CANBus cable and worked with the Galileo 2 Extruder didn't work as expected. Some had a design flaw that caused more stress on the cable than relief; others…
About Galileo 2 + LDO Nitehawk SB USB cable strain relief / cable gland Not a biggest fan of PG-7 cable glands (like me) and willing to make safe and secure LDO Nitehawk-SB USB cable strain relief using Galileo 2 Extruder ? This one is…
I designed a waterproof cable gland for strain relief as the only ones I could find weren't water tight. The design is based on commercially available glands but is modified to be more printable and customizable. You will need TPU for the…
English I originally published this thing at thingiverse (thing nr. 4044765). I use this for my dryboxes, that you can find here: https://www.printables.com/de/model/161557 Use this connector instead of the original nut, that comes with…
Kabelová průchodka pro vykružovák PARKSIDE. Můžete použít i tuto verzi s nastavitelnými parametry: Kabelová průchodka (Cable gland) - OpenSCAD parametrizable Pokud mě chcete podpořit, můžete zde: PayPal , BuyMeACofee , QRCode . Děkuji
Cable Retention Bushing / Gland for USB cables, for example from arcade sets from Aliexpress. Lock tab is 8 x 8.5 x 1.6 mm. Cable is 4 mm. For holes 18 mm or 22 mm. I printed a layer of 0.16 mm.
Not every orc goes to war fully dressed. Some just go full beast mode. This “Au Naturel” Orc of Vogland is a hilarious yet battle-ready addition to your 28mm fantasy lineup. Perfect as a berserker, wild brute, or NPC chaos-maker in your…
I created these two different New England Patriots inspired coasters. Each style requires 4 colors and preferably an AMS system to make the swapping colors easier. These were printed on a Bambu X1C using Bambu Black PLA, Bambu Matte White…
After trying out another mount found here I noticed that the ebb36 was uncomfortably low. To point of risking a fire, the heater ports are too close to the VZ CNC Toolhead top plate. The can-board itself sticks out roughly 4mm above the…
He doesn’t wait for orders. He doesn’t care for armour. He charges first - and sometimes even survives. The Berserker of Vogland is a frenzied, axe-wielding warrior designed for 28mm fantasy battles, RPGs, and miniature painting. Whether…
This is a custom-designed adapter that fits into a standard M25 cable gland opening on an electrical enclosure or control cabinet wall. Instead of holding a cable, this part is specifically made to hold a 20mm (outside diameter)…
Moin Moin, here is my New England Patriots logo. Have fun with it! :) Print settings are: Nozzle 0.4mm Layer height 0.2mm Filling 20% Walls 3 Lid top + bottom 4 ________________________________________________________________________ Moin…
This is a stand for a Kegland Oxebar keg (4l and 8l version) with a SodaStream mount. Puts together a Oxebar keg and a SodaStream cylinder into a nice package so it can't fall over (especially for the 8l version). If you use a mini…
New England Patriots Oversized Necklace Logo that I designed. I hope you enjoy!
This is an edit of the WWG2 NH36 Mount for PUG because i rather wanted to use PG7 and didnt find any other good models
Kabelová průchodka, nastavitelné parametry v OpenSCAD. Koukněte i na mé další modely . Pokud mě chcete podpořit, můžete zde: PayPal , BuyMeACofee , QRCode . Děkuji
coat of arms - England znak - Anglické království
Brush Cable Grommet for AD5X Flexible brush-style cable entry for heated bed wiring — clean, durable, and easy to install. This model is designed to guide heated bed cables through the printer enclosure panel. It helps prevent cable…
I didn't like the cable routing for the Panda Breath on my Snapmaker U1 so took the plunge and decided to drill a hole in the back window. Easily plugged if necessary. Use the drill guide (with the flat edge against the bottom outside…
Drop-in replacement for PUG, but more flexible and durable. I like PUG a lot, but one of them broke after using it for a while. (Printed in ASA) I tried using TPU 95A, which is much more durable, but it came out way too soft. This remix…
This is a cable gland of the type where "fingers" are pressed against a gasket by a cap. The nut attached to the core of the gland is supposed to be used when screwing on the cap while the loose nut is used to attach the gland core to box…
Simple one sided Xmas Ornament with varying heights for multi-colored prints without having MMU. In Prusa Slicer, select “Apply Color change automatically” to add color change breaks at .80 / 1.4 / 2.0 mm (using .20mm slices) and have…
Thanks for sharing from the author Follow me for other drawings that may be useful to you. Happy Printing
Sometimes you need a larger cable gland than the PG7/M12 version everyone uses. If your using a premade CAN cable and do not want to repin or cut your cable then this is for you. PG11 is just slightly too small for the LDO Nitehawk Cable.…
These models were quickly put together to meet Super Bowl 60. The diameter of the hole on the ring is 0.875 inches, scale if need be. GO PATS!
I wanted to make a New England Patriots logo, but my printer only has one extruder, and I didn't want to buy 4 more colors of filament. The parts fit together with friction, but I used a dab of super glue to hold them in place. There's a…
Fit M12 gland from aliexpress. Print thread down with organic supports
New England Patriots 1st Layer Silver 2nd White 3rd Blue 4th Red
I have created a remix based on the fantastic concept originally shared by @dereulenspiegel, which can be found here: link to the original design . Upon trying the original design, I realized that it didn't fit perfectly with my new 19L…
I wanted to have a custom motor panel for the PG7 cable gland (M12) and for the cables for my chamber LEDs. Top view Bottom view
EBB36 Mount for Xol Toolhead with VZ-Hextrudort with added M12 holder. (Cable Gland) In the holder part there is a hole for an M3 heatinsert. Also there is a groove for a zip tie Printed with standard voron part settings in CR3D ABS Carbon.
Fits 4.1mm ptfe tube, 7mm drill hole and 14mm thick board. Parametrized FreeCAD 0.19 file included to allow for other sizes of tubes and boards. (video and some more info on my blog )
Simple M12 Thread Mount For Attaching A Cable Gland To The Back Of CW2
In order to tighten cable glands with reduced space around them, some cable gland “wrenches” have been made. M12 version - WAF (width across flats) 15 & 16mm M16 version - WAF (width across flats) 19 & 22mm M20 version - WAF (width across…
i found this awesome castle and thought it would make a cool planter pot.
A Spanner for the lid of Fermzilla range of fermenters by Kegland. I've only tested it with the all rounder model but I think the lids are the same. It may work for other models as well. Print in PLA as its a little stiffer than PETG.…
Every warband needs a wielder of the weird — and this one trades brute strength for arcane fire. The Orc Mage of Vogland brings magical chaos to your 28mm fantasy lineup. Whether he's lobbing fireballs, raising the dead, or just keeping…
It is a fantastik 3 d printet logo!
[EN] This is a wall mount enclosure for Sonoff Basic with cable gland PG3 and snap fit cover. Enclosure has been tested with Sonoff Basic R2 Enclosure is printed from PETG with layer height 0,2mm. Enclosure outer size is (LxWxH)…
This cable gland is built in two parts so that it can clamp an ethernet cable with an connector. The hole size is 1". I used this part to pass an ethernet cable from my CNC control box (Centroid Acorn). Standard cable glands were too…
This PG07 type cable support is intended to be super lightweight, so is thin and requires a strong filament with good layer adhesion for best results. I've had no trouble with ABS, but others report some cases of breaking along layer…
These two-piece cable glands are fixed with double-sided foam or a screw. ----- Update ----- Version with higher toler
Needed a gland mount for my ebb2209 SB
PG7 Gland Adapter for EBB36 Mount that works with any of mine EBB36 mounts. Just print it with any ABS filament with usual Voron print settings.
Cable gland to the work table. Diameter 44mm/51mm/55mm/57mm/60mm/64mm/76mm Board thickness 25mm and 40mm
St George's Day is celebrated each year on the 23rd April in England. This day commemorates Saint George as the country’s patron saint and is often marked by displays of the red cross flag, storytelling, and tributes to bravery and…
I present my first completed creation from a logo on the internet to a full set of 3d printed statues/displays/thingies (they are around 6 inches tall each color printed separately and then assembled)….HA. Acquired my printer in October…
Grommets Cable Gland Collection - Boccole Passa Cavo Ø18-24mm Ø20-26mm Ø22-28mm Ø24-30mm Ø26-32mm Ø28-34mm Resize/Scale to adjust dimensions All our designs are free to download and use—because sharing drives innovation. Your support…
Convenient adapter for connecting corrugated conduit (iD 17mm, oD 21.5mm) with Haupa PG-16 cable gland. Printed without supports. You can use the zip ties to additionaly secure the conduit.
Added an opening for camera cable, Neopixel, party in the back and more Released under GPL which i cant select because of how Printables works with remixes. Please see the original for the proper license.…
small video preview gland TC 16х30х4,5 example: https://ozon.by/product/manzheta-armirovannaya-salnik-tc-16h30h4-5-1281241717/?__rr=1 https://youtube.com/shorts/HhOks5Je0Po Category: 3D Printing
England have made their first major final since 1966. As a tribute and for a gift I produced this print which I then used a resin overlay for. This is to be given tot a friend as a housewarming gift. Hopefully England can win the final.…
Avoid tangling the umbilical cable with the Z chain ! This mod is intended to be used with this one : https://www.printables.com/fr/model/363657-voron-v24-trident-rear-umbilical Print the cable gland twice in TPU and use 3 zipties to keep…
The kegland nukatap mini and flow control disconnect is a pretty cool little widget, but flexes way too much in stock form. This brace clips straight on and reduces almost all the flex. I also tried a top pin - had a 2mm bicycle spoke…
white until 6.4mm red until 6.8mm finish with blue
A niche design for cable bulkheads or glands, for those cables with large molded connectors. It's base size works on HDMI cables, and can be scaled for a range of sizes (I've tried 60 up to 110%) The flat part of the cores may need to be…
This Vogland Orc miniature was created for my YouTube viewers specifically for something fun to easily print and paint. This version was created by a buddy of mine, Huan (find him https://www.instagram.com/juanofthekind ). When printed…
England Football Crest Category: Signs & Logos
Desk Cable Gland / Schreibtisch Kabeldurchführung
This tested and fit a ¾" electrical box. I printed in PLA for indoor use, but I would use PETG for outdoor. I haven't tested this for water tight but it is similar in design from what you get off of Amazon which claims to be water tight.…
A cable gland for cables with an outer diameter of 11mm and with a M16 thread. I used it together with the junction box https://www.printables.com/de/model/775897
Hard to find. Easy to make. Easy to print. May be used for already dragged cable - cutted to allow this. Parametric. Make as you need. Open .f3d file in Fusion360 and edit parameters. Save as stl. Slice, print, enjoy! Print with TPU.…