Search results: glide

Sort order

885 models

P
Printablesrobotfriend

Ultralight 2gram Glider (print in place)

If you enjoy this model, take a look at the new F23 Glider: https://www.printables.com/model/456057-f23-ultralight-glider-print-in-place or a glider starship:…

Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant

Downloads
52,246
Likes
8,823
Rating
4.59
P
Printablesrobotfriend

F23 ultralight glider Print in Place

A completely new Ultralight Glider design inspired by the YF23 fighter jet concept and using lessons learned from my previous Ultralight 2gram Glider: https://www.printables.com/model/430012-ultralight-2gram-glider-print-in-place (also…

Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant

Downloads
4,996
Likes
574
Rating
4.8
P
PrintablesDuct Tape Magic

Meadowlark Performance Glider: 51m Range

The green mat is 1 meter for scale. You can count frames to determine the speed it you like! The video is at 30 fps like all standard youtube videos. It covered the distance in about 1.2 frames, so it is going around 25 m/s, or 90 km/h. I…

Print approx. €0.45–€0.56 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
4,766
Likes
725
Rating
4.9
P
Printablesc-arts-modelle

Lukisegler-NG XS 3d-printed mini RC-glider

Lukisegler-NG XS Span: approx. 900 mm Body length: approx. 500 mm Take-off weight (LW-PLA): approx. 100 g Controls: elevator / aileron Center of gravity: 7 mm behind the profile nose (next to the fuselage) Rudder deflections: aileron…

Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant

Downloads
2,685
Likes
596
Rating
5
P
Printablesc-arts-modelle

Lukisegler (electric RC glider)

CArts Lukisegler !! Attention !! There is an updated version of the fuselage of the Lukisegler: https://www.printables.com/de/model/927540-lukisegler-20-electrical-rc-glider CArts Lukisegler (english) Span: approx. 1700 mm Body length:…

Print approx. €0.19–€0.24 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
2,270
Likes
258
Rating
5
P
PrintablesDieHard

Airbus A380 slingshot glider (Only need one elastic band!)

Hello! This Glider has been based off the world’s largest passenger plane the Airbus A380-800 . Both the wing (and body) shape as well as the tail wing/stabiliser are nearly identical to the actual plane however to allow the plane to…

Print approx. €0.88–€1.08 excl. taxPreliminary estimate for one variant

Downloads
1,329
Likes
211
Rating
4.5
P
PrintablesZenlayne

Tiny soap glider

Hey ! This is a fun project I really wanted to share with you because I had lots of fun with it ! The concept As you can see, the concept is simple, it is juste a tiny 3d printed glider with the wings made out of "soap bubble liquid"!…

Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant

Downloads
1,097
Likes
337
Rating
4.55
P
PrintablesLoogle

Sling Wing - Folding Wing Slingshot Glider

Intro I love flying wing gliders, but they're very difficult to launch by hand with any significant flight time due to instability at high speeds and typically large aspect ratio. I came across expired US Patent 4836817 for a folding wing…

Print approx. €0.82–€1.00 excl. taxPreliminary estimate for one variant

Downloads
904
Likes
209
Rating
5
P
PrintablesManos3DModels

Stealth Glider Concept

Stealth Glider Concept I designed in Blender for the Printables contest! Use the least possible material, so it comes out light! I recommend 0.12 layer height, with no more than 2 walls, and below 4% infill For optimal flight/gliding it…

Print approx. €8.02–€9.80 excl. taxPreliminary estimate for one variant

Downloads
784
Likes
162
Rating
2
P
Printablesc-arts-modelle

Lukisegler 2.0 (electrical RC glider)

Lukisegler 2.0 an RC electric glider with brushless drive Attention! Since this is a large project with many files, I will add more instructions here in the near future! Instructions for the fuselage are included in PDF format. The first…

Print approx. €0.22–€0.27 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
658
Likes
114
Rating
5
P
PrintablesDieHard

Airbus A320 slingshot glider (Only need 1 elastic band!)

Hello! This Glider has been based off one the worlds most sold aircraft since 1986, the Airbus A320 . Both the wing (and body) shape as well as the tail wing/stabiliser are nearly identical to the actual plane however to allow the plane…

Print approx. €1.10–€1.35 excl. taxPreliminary estimate for one variant

Downloads
653
Likes
129
Rating
3
P
PrintablesAdam

Tri-Glide Webbing Slide (Threaded and No-Thread)

This is a simple tri-glide webbing slide for 1" webbing. There is a threaded and no-thread version. Update: versions are also available for 30mm, 1.5", 50mm. Design parameters: The webbing slots are sized for 1" webbing (actual width is…

Print approx. €0.13–€0.15 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
625
Likes
56
Rating
5
P
PrintablesJoeRixon

MQ-9 REAPER throw glider.

MQ-9 REAPER (Predator-B) model cleaned to the best of my ability designed to be thrown. Was aiming for a medium glide with proper aerofoil that fits on a Prusa mini 180mmx180mm bed; prints within 30mins without supports (Printed in wet…

Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant

Downloads
393
Likes
42
Rating
0
P
Printablesc-arts-modelle

Lukisegler (electric RC glider) update

Lukisegler update (english) Update of the wing-parts 10 (l/r) and 12 (l/r) from version 2 (v02) to version 3 (v03). The perforation for the servo-cables are now included in the printed part. It is no longer necessary to cut the holes by…

Print approx. €1.08–€1.32 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
347
Likes
59
Rating
5
P
PrintablesT. Jansen

Print in Place Glider

Print Instructions Supports or ballast are not required. It is beneficial to have the perfect first layer function of the Prusa MK3.9(S), MK4(S), Core One, or XL. The following settings in PrusaSlicer are recommended: Printer Hardware…

Print approx. €0.60–€0.74 excl. taxPreliminary estimate for one variant

Downloads
325
Likes
14
Rating
4
P
PrintablesExtra Fox

Webbing Triglide

I needed a triglide for some 38mm (2.5") webbing to hang a wildlife trail camera. It's even got the grippy teeth things to keep things good and secure. You can ignore the imperfection on the part in the photograph, that was due to me…

Print approx. €0.49–€0.60 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
266
Likes
32
Rating
5
P
PrintablesTeo_211

Harley-Davidson Street Glide Wall Art

Harley-Davidson Street Glide Wall Art Silhouette model. Adjustable size. I accept model suggestions.

Print approx. €1.23–€1.51 excl. taxPreliminary estimate for one variant

Downloads
262
Likes
37
Rating
5
P
Printablesc-arts-modelle

Lukisegler-NG XS e mini RC-glider (Update to brushless electric drive)

Lukisegler-NG XS e, Update to brushless electric drive Wingspan: approx. 900 mm Fuselage length: approx. 500 mm Take-off weight (LW-PLA): approx. 120 g Controls: elevator / aileron / motor Center of gravity: 8 mm behind the profile nose…

Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant

Downloads
240
Likes
42
Rating
0
P
PrintablesSamuel Panák

Avatar Aangs Glider

Model of glider which Aang used in the series Avatar: The Last Airbender . File .3mf is set with ironing of all upper layers too with a first layer.

Print approx. €0.46–€0.57 excl. taxPreliminary estimate for one variant

Downloads
201
Likes
61
Rating
0
P
Printablesc-arts-modelle

Lukisegler (electric RC glider) update: Servoplate for 9g (Mini-) Servos

Lukisegler update (english): Servoplate for 9g Servos Servoplate for 9g servos (standard-mini-servos). Lukisegler update (deutsch): Servoplate für 9g Servos Servoplatte für 9g Servos (Standard-Mini-Servos).

Print approx. €0.38–€0.46 excl. taxPreliminary estimate for one variant

Downloads
188
Likes
25
Rating
0
P
Printablesc-arts-modelle

Lukisegler (electric RC glider) optional nose section reinforcement

Nose section reinforcement (optional) For engines with high power / high torque, I designed a reinforcement for the nose area. It is glued in with epoxy resin. It is primarily intended for LW-PLA fuselages. Print this in PETG. Verstärkung…

Print approx. €0.30–€0.37 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
145
Likes
16
Rating
0
P
PrintablesHaggerty3D

Thule Urban Glide 2 - Flashlight Attachment

Context My sister runs early mornings with her child and has no good way of mounting a flashlight to her stroller. Design I designed this to attach to the front bars of the stroller and be adjustable for different flashlight angles.…

Print approx. €1.92–€2.34 excl. taxPreliminary estimate for one variant

Downloads
116
Likes
48
Rating
0
P
PrintablesMarcus

Bosch GST 150 CE glideplate for 8 inch subwoofer

Made for Cut the main hole for 8 inch subwoofer with a Bosch GST 150 CE i use a 5mm bolt 40mm long

Print approx. €3.50–€4.27 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
48
Likes
19
Rating
0
P
Printablesofthedove

Unbreakable Kenlin Rite Trak 1 Drawer Track - Improved Glide

I remodeled the glide from the linked model. The original glide has a cutout and ramp to more easily allow the drawer to be installed. There's a bump in the track on the drawer that presses down on the glide. The ramp makes the drawer…

Print approx. €0.52–€0.63 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
40
Likes
4
Rating
5
P
Printablesyetpak

Thule Chariot / Thule Urban Glide ski holder

This is a simple ski holder for Thule Chariot gen 2 (maybe on gen 3 as well, not tested), and for Thule Urban Glide 2/double. The design is a mixture of average3Ds Bike Mount and Nordheims original ski holder idea for the original Thule…

Print approx. €4.25–€5.20 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
34
Likes
0
Rating
0
P
PrintablesTperroneDesign

Estes Solo Rocket Stand & Replacement Glider Ring

This is a stand for the Estes Solo model rocket. Since the rocket has asymmetrical fins it doesn't stand on its own. Just flip the glider upside down and rest the rocket on the stand. Also included is a replacement glider ring STL if you…

Print approx. €0.47–€0.57 excl. taxPreliminary estimate for one variant

Downloads
28
Likes
9
Rating
0
P
PrintablesMrJW

Ledlenser MH7 tri-glide buckle

A replacement buckle for Ledlenser MH7 LED flashlight. Should work with any other similar strap. Tried to model it as close to the original as possible, there are some deviations, feel free to modify it. Printing Instructions Use PETG,…

Print approx. €0.34–€0.42 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
21
Likes
4
Rating
0
P
PrintablesJohn Doe

Simple Indoor Glider V2

This was printed on the Bambu P1P and printed in 23 minutes(17 minutes of actual printing) with white PLA basic. It used just under 10 grams of filament. Check out the Makerworld profile…

Downloads
27,282
Likes
5,133
Rating
4.78
P
PrintablesJoão Hackbart

Stable Flyer VI - Small Toy Glider

NOTE: After reading this paper on the effect of Tail Dihedral on stability, and experimenting on my design, it seems that it is a great idea to angle the Horizontal Stabilizer into a negative dihedral (anhedral). Or in other words, for…

Downloads
23,137
Likes
3,867
Rating
4.63
P
PrintablesRyan

Simple Lightweight Glider (20g)

Features: 10 by 10 inches (scale down in slicer for smaller sizes) Flies 35 to 50 feet 20 grams of PLA One part No supports needed! Usage: Pinch behind wings Adjustable flaps for optimal preformance Bend front wing flaps down and back…

Downloads
14,122
Likes
1,560
Rating
4.07
P
PrintablesTom Stanton

Tissue Paper Glider

This plane is designed to be printed directly onto thin tissue paper (17gsm) to produce a lightweight glider. Printing tips: To hold the tissue paper to build plate, I used thin 2mm magnets (mine were 30x10x2mm, but they can be smaller).…

Downloads
8,206
Likes
2,708
Rating
4.83
P
Printables3D EVOLUTION
Downloads
6,210
Likes
1,058
Rating
4.35
P
PrintablesSouky1122

Super Glider - Easy to print

the final version of my glider model, which is very easy to print. all it takes is one print, a little editing, and it's ready to fly! Recommended print parameters: 3 walls 20% infil Material PET-G (can use PLA but PLA is brittle so there…

Downloads
5,603
Likes
628
Rating
4.8
P
PrintablesCrazy_engineer!

Simple glider

This glider was printed on a Ender 3 V2 NEO with Creality PLA. The first two layers shall be printed slowly (50mm/s) to ensure layer adhesion. Settings 100% infill 0.2 mm layer height max speed 100 mm/s Post processing Use a hot air gun…

Downloads
5,374
Likes
661
Rating
4.67
P
PrintablesMicah T

Fun Rubber Band Glider ≈4g

This model is a remix of another glider but I wanted to make it faster so I designed a hook for it. I went through 4 iterations of the hook to make it strong enough to withstand hard impacts. I've printed more of these than I can count,…

Downloads
5,193
Likes
881
Rating
4.4
P
PrintablesJohn Doe

Giant Indoor Glider v4

Prints on the Bambu P1S in exactly 30 minutes with the provided 3mf file. Print in PLA with 100% infill. Be careful not to bend the wings while removing from the build plate. Once you take the glider off the build plate, flip it over(flat…

Downloads
5,152
Likes
619
Rating
4.83

Glider - Toy Plane suitable for Prusa Mini

Printsettings: 0.2mm ~20% infill (still testing!) no support needed use PETG! PLA might be to bridle You need a rubber launcher! like this or this I'm currently trying to build a rubber toy glider, which can be printed in one piece…

Downloads
4,114
Likes
388
Rating
4.72
P
PrintablesLanzDesign

VasePlane - Vase Mode Glider

V2: Version 2 is now available! The pinch grip has been removed and replaced with a hook to launch the glider with a rubber band. A rubber band holder/handle is also included. (Gif of V2 flying has been added at the bottom of this post!)…

Downloads
3,856
Likes
437
Rating
4.89
P
PrintablesJoeRixon

Stable glider V7a + Notch for rubber band launch (50m+ range)

This glider will be: Furthest gliding Quickest to print Printable on Prusa mini Continually improved through Iterative design Flight preparation: Bend wings upward (5 degrees is best I've found) (Dihedral) Bend rear elevators UP (points…

Downloads
3,317
Likes
365
Rating
4.94
P
PrintablesFilip Fishing

Mini Glide Bait fishing lure

3D Printed Mini Glidebait Fishing Lure The lure features a two-piece jointed body that creates a smooth, natural swimming action when retrieved. With a slim profile and slightly curved shape , it mimics a small baitfish, making it perfect…

Downloads
3,129
Likes
229
Rating
4.67
P
Printablesniletaner

The Glide | Minimalistic Functional Glider

This is the final iteration of my lightweight 3D printable glider, developed and optimized after beta phase. During the beta stage, I tested balance and tail geometry. Based on "flight trials", the rear section (tail assembly) has been…

Downloads
2,782
Likes
379
Rating
4.5
P
PrintablesLoboCNC

AutoGyro Ring Glider

There are a couple of problems with most of the 3D printed flying rings: Firstly, it's difficult to get the right mass distribution with 3D printed plastic. Secondly, they are damnedably difficult to throw with the proper spin, and liable…

Downloads
2,708
Likes
707
Rating
4.85
P
Printablessamscoolprints

glider perfect for summer

use 30% infil but also dont chuck the plane at the ground just give it light throw fold back wings up like in picture. also if you remix my model please honor the original creator. hope you guys like it

Downloads
2,512
Likes
353
Rating
4.42
P
PrintablesLanzDesign

VasePlane V2 - Vase Mode Glider with Rubber Band Launch System

This model is the V2 version of the original VasePlane which can be found here . This glider is inspired by the stereotypical single seat fighter jet appearance and has a hook just under the nose so that a rubber band can be used to…

Downloads
2,410
Likes
336
Rating
4.86
P
PrintablesAlex

one piece mini glider v1.1 easy print & fly

UPDATE 4: tests with kf airfoil wing very successful, can fly longer, faster and stable without fluttering UPDATE 3: test video of glider 1: https://youtube.com/shorts/DSoBWi8LOhU UPDATE 2: the first version's wing can be stiffened with…

Downloads
2,368
Likes
235
Rating
4.82
P
PrintablesJiří Vaško

Thule Urban Glide 2 - Leg holder

Leg holder for Thule Urban Glide 2. Print without supports. You can cut model to smaller height.

Downloads
2,292
Likes
103
Rating
5
P
PrintablesBP3D

TERROR-DACTYL Glider with Fossil Launcher (Airplane)

This model flies really well and looks really cool! Please let the print cool down fully before carefully removing the glider as to not unevenly bend the wings. For better gliding bend the wings and tail wings slightly so there is about a…

Downloads
2,244
Likes
249
Rating
5
P
PrintablesSevro

Swift - small bird glider

Overview : One of my favourite bird is common swift. The true kings of flying. It is the only species that spends most of its life in the air including eating, drinking, mating and even sleeping. They can spend up to 10 months in the air…

Downloads
1,933
Likes
305
Rating
5
P
PrintablesjSamz12

Falcon Glider

UPDATE: I have made another glider that blows this one out of the water. It may take slightly longer to print but trust me it is worth it. Check it out yourself! Viper Glider (Impressive Sturdy Glider) by jSamz12 | Download free STL model…

Downloads
1,902
Likes
413
Rating
3.5
P
Printablesfifindr

Mini Plane Glider

The first two layers use variable layer height to keep the wing thickness at only 0.2 mm while still maintaining better strength using two printed layers. A lightweight miniature glider plane designed for simple hand launching and smooth…

Downloads
1,834
Likes
176
Rating
3.6
P
PrintablesLoboCNC

Gooseneck Glider (Rubber Band Launch)

After designing my business card glider , I decided to try an all 3D printed design. Taking a lot of inspiration from exosequitur's collection of gliders , I came up with this smooth gliding design that just fits on the bed of a Prusa…

Downloads
1,764
Likes
174
Rating
5
P
PrintablesVaughn Whitney

Glider & launcher (print in place)

This is a super fun toy, and the best part about is that it is print in place! Simply slide of rubber band onto the launcher, and have fun! The plane is designed so that with its thin wings, it can be manipulated to fly in any way. By…

Downloads
1,646
Likes
485
Rating
0
P
PrintablesIan Foulds

Hoop Glider

This model has been superseded by my remix that improves the interference fit I suggest downloading the new version. https://www.printables.com/model/1736993-hoop-glider-redux-improved-interference-fit This is a ring wing glider also…

Downloads
1,609
Likes
352
Rating
4.5
P
PrintablesPaul Milovanov

Backrest raiser for Thule Urban Glide 2 stroller

The most upright backrest position on the Thule Urban Glide 2 stroller is too reclined. This gadget props it up higher. It's based on the ingenious design by @Thomas_157995 which is really clever and well done. I've used one of Thomas's…

Downloads
1,486
Likes
66
Rating
5
P
PrintablesGeoPrints13

Nightfury Glider

Glider modelled after the silhouette of a Nightfury dragon. I saw Sevro's dragon glider and I had to make my own. Printing Instructions : Print at 100% infill to ensure proper weight and with the 105% first layer extrusion width to ensure…

Downloads
1,477
Likes
133
Rating
4.86
P
PrintablesLaisch

ASW20 Sailplane (micro glider - flyable)

This is a scaled flyable micro version of the ASW20 sailplane from Schleicher. The model was created to be lightweight and printable in normal PLA. Because of it's lightweight behaviour it's a little bit fiddly to get it together properly…

Downloads
1,399
Likes
151
Rating
5
P
PrintablesjSamz12

Viper Glider (The Best Glider You'll Find!!)

This glider can very easily be launched by hand, just as a paper airplane would. It glides very well. There is also a stand for displaying your glider when not being used. I hope everyone enjoys this I have put many hours into it. If…

Downloads
1,397
Likes
186
Rating
5
P
Printablescolbert67

Make It Glide

Introduction Hello! This hand-launched glider was designed to take advantage of the unique capabilities 3d printing has to offer when it comes to aerodynamic design. This model was created as an entry in the Prusa “Make It Fly” design…

Downloads
1,396
Likes
481
Rating
4
P
Printablessamscoolprints

Glider plane made for fun

Print as a gift or toy for you fold the wings up for more action (sorry i could not get an image :D)

Downloads
1,311
Likes
199
Rating
5
P
PrintablesDirac Arts

Rubber Band Powered Glider

I updated all files that were in giant dimensions and reduced the size of the wings a little to better frame Use 100% filling with some hard material and with thin layers, as this model has small and precise parts that fit together, after…

Downloads
1,302
Likes
136
Rating
0
P
Printablesjim reurink

raptor mini glide bait

raptor mini glide bait

Downloads
1,296
Likes
52
Rating
3.5
P
PrintablesJohn Doe

Mini Indoor Glider

Prints in 15 minutes on the Bambu P1P, 33 on the Ender 3 V2. Once printed, wait for the hotbed to cool down and gently remove with a scraper tool. Bend the elevator slightly upwards and bend the ends of the wings up. Hold the plane from…

Downloads
1,276
Likes
100
Rating
4.5
P
PrintablesMartin

Death Glider from Stargate

This is my model of the Death Glider from the Stargate franchise. I made the model myself and printed it and painted it. The model has all the features seen in the show - foldable wings, retractable cockpit windows, retractable cockpit…

Downloads
1,265
Likes
270
Rating
5
P
PrintablesLoboCNC

Desktop Whomp Rocket & Glider - Angled Launcher

This stomp rocket/glider combo has an angled launch tube, making it great for inter-cubicle warfare. Providing, of course, everyone is wearing safety glasses. Truth be told, the glider is a little on the heavy side, so don't expect long,…

Downloads
1,154
Likes
189
Rating
4.73
P
Printablesdancan13f

Glider

PRINT SETTINGS Wing & Elevator Filament: PETG Perimeters: 4 Layer thickness: 0.1 mm First layer: 0.1 mm Infill density: 100% Overlap Infill/Perimeters: 30% Fuselage Filament: PETG Perimeters: 4 Layer thickness: 0.1 mm First layer: 0.1 mm…

Downloads
1,131
Likes
219
Rating
4.5
P
PrintablesAvgjo

1:50 scale 1905 Wright Flyer (Glider)

Have the burning desire to conquer the skies? Then you're not alone. The pioneers of aviation risked their lives to learn how to control their barely flying contraptions. You don't have to risk yours to re-imagine their early feats with…

Downloads
1,103
Likes
290
Rating
4.86
P
Printablesrobotfriend

USS Enterprise 1701-F Print in Place Glider

Ultralight Glider - Start Trek (Star Trek Online STO) Odyssey Class USS Enterprise 1701-F. Print at 0.2mm layer height. Carefully remove from build plate (use scraper from front and slowly work your way down through the nacelles). If you…

Downloads
1,098
Likes
194
Rating
4.86
P
PrintablesSzachu

Mouse Wrist Rest (Wrist glide)

Wrist rest for computer mouse. (Left handed version) In order to get right-handed version mirror the print in your slicer Original design: https://www.thingiverse.com/thing:5156693

Downloads
1,086
Likes
110
Rating
4.71
P
PrintablesKevin Scott

Bosch GCM12SD Axial Glide Miter Saw Zero Clearance Insert

I printed mine at 100% infill. Then I used CA glue right before screwing it down. Once I screwed down the insert, I made the cut.

Downloads
1,077
Likes
118
Rating
4
P
PrintablesDirac Arts

glider Airplane with Slingshot

Este modelo é dividido em duas partes com pinos separados para não precisar de suporte

Downloads
1,067
Likes
147
Rating
1
P

Nerf Glider

Fun little glider plane powered by Nerf. Modeled to fit with a Nerf Jolt but should work with most single-shot front loaders. Tested on Jolt and Sidestrike with success. Simply load the blaster with a dart as normal, then slide the glider…

Downloads
996
Likes
171
Rating
4.5
P
Printableshenryseg

Slide-glide cyclides

This design is made out of shapes called cyclides . In this mechanism the cyclides rotate against each other, opening out while staying in contact so that the overall shape transforms from a sphere to a disk. This design was discovered by…

Downloads
986
Likes
288
Rating
5
P
PrintablesTifn

Vase mode glider (customizable) with rubber band hand launcher and tripod mounted catapult

Quick howto print planeur15_crochet.stl, preferably in PETG, in vase mode with 0.18 layer height, 30mm solid bottom at 20mm/s with cooling fan enabled at full speed. print lanceur.stl normally in PLA (0.15 layer height, 2 perimeters, 10%…

Downloads
974
Likes
90
Rating
5
P
PrintablesLeah Konapelsky

Lightweight toy glider plane

Lightweight glider plane for kids

Downloads
929
Likes
47
Rating
3
P
PrintablesSeppoTheFish

Paper plane glider, PLA based

Printing instructions: Add some extra veritcal shells to increase durabilitie of the wings Remove “Elephant foot compensation” to make the connection link at the tail wing work. Let the model cool down after printing. Removing it while it…

Downloads
911
Likes
116
Rating
4.71
P
PrintablesOWL ART

Rubber Band Glider Launcher

Rubber band powered gun for launching a glider. Minimalistic model for a small consumption of material. Easy to print and assembly. I printed it on MINI+ with 0,4mm nozzle and PLA. Print info Body, Cover and Trigger need to be printed…

Downloads
863
Likes
211
Rating
5
P
PrintablesHDT_dŠ

Thule Urban Glide - Fold Lock Anchor 40107011

Thule Fold Lock Anchor 40107011 For Urban Glide 2, Glide 2 a Urban Glide 2 Double.

Downloads
817
Likes
34
Rating
5
P
Printables3D-Muc

Glider Jet Model for advertising - give aways

Small aviator for a gift at a model building show. At our exhibition I printed the planes with my Delta printer and gave them away to children. One template is with text and one without for your own text. The model is flat at the bottom…

Downloads
815
Likes
70
Rating
5
P
PrintablesKavitha Sankar

Glider

Glider Presenting you the aerodynamically designed hand launchable glider. The design incorporates features favouring adequate lift, lower drag and yaw…providing a stable flight to the glider. It is to be printed as separate parts and…

Downloads
812
Likes
57
Rating
0

Folding Wing Glider - Only Needs a Rubber Band!

This model is a folding wing glider, tilt the wings down and backward and it will fly like a dart, once it hits its apex the rubber band will be able to overcome air resistance and will flip the wings into glide configuration. With…

Downloads
790
Likes
152
Rating
5
P
PrintablesUpscale Lures

Generic AF Glide Bait V1.5 Fishing Lure

FREE 1-page Glide Guide (recommended before your first swim test) Want the Top 5 tips to make your first glide swim right? Grab the FREE 1-page Generic AF Glide Guide → https://mailchi.mp/a695a4acc986/pr-glide-guide (Instant PDF + if it…

Downloads
780
Likes
138
Rating
4.67
P
PrintablesVaughn Whitney

Glider with print in place handheld launcher

**please click download all! ** This is a super fun glider with a satisfying launcher mechanism that I made on fusion! This is the best thing I have designed on fusion yet, and I will focus more on this kind of thing if it “takes off.” I…

Downloads
749
Likes
144
Rating
0
P
PrintablesJohn Doe

Wobbling Indoor Glider v2.5

Flies slower and more accurately than v2, at the cost of reliability and build difficulty. Is more durable and can be modified more. Print with 100% infill in PLA. A brim isn't needed. Wait until the build plate is cool before removing…

Downloads
730
Likes
42
Rating
5
P
PrintablesHenne

Thule Urban Glider/Chariot Sport Hook

Das ist ein Haken der für die Thule Produktreihe (Urban Glider 2/ Chariot Sport / etc.) funktioniert. Im Gegensatz zum Original ist er etwas größer.

Downloads
708
Likes
61
Rating
5
P
Printablesflok

Alexander Schleicher Ka8-b Glider

This is a detailed scale-model of the popular Ka8 Glider! Facts: Wingspan: 35cm Length: 16cm Height: ca. 5cm Update 06.03.2023 : Reworked geometry at the wings! Especially the thin areas around the trailing edge and the aileron create a…

Downloads
704
Likes
53
Rating
5
P
PrintablesMA

Glider Ornament

The glider prints in two halfs, that way you dont need supports. For print settings I used the standard 0.1mm profile and increased support to 25%. That way the balance front to back is pretty spot on. You will probably also want to turn…

Downloads
697
Likes
64
Rating
4.86
P
Printableskikomle

Glider airplane

A simple glider inpired by a paper airplane. Instructions: Print with low or no infill as it will be to nose heavy if you put infill Use 2 walls Make sure to level your bed properly before starting the print Any remixes are very welcome…

Downloads
678
Likes
42
Rating
0
P
PrintablesOrion3D Studios

Easy Print Glider

Remember those gliders you would buy at the book fair? Well, now you can print one. Print at .10mm at 5% infill.

Downloads
677
Likes
75
Rating
4.67
P
PrintablesSokoleONE

Mini Paraglider for car mirror

Model on photos is printed in 70% scale.

Downloads
676
Likes
57
Rating
4.71
P
PrintablesBUSH_123

Mini glide bait v2 (fully 3d printed)

check out the new version link -100 percent infill -glue tail on to body

Downloads
667
Likes
46
Rating
4
P
PrintablesRory Luciano

Glider Plane

A glider that is 216 mm in width. Should print on most printers.

Downloads
665
Likes
25
Rating
5
P
PrintablesMarco_3D_models

paraglider

so easy, no tips needed.

Downloads
594
Likes
40
Rating
5
P
PrintablesSmall_Noob

Stratos Glider

Your printer has to be able to print smooth 1st and 2nd layers. PLA 0.20 mm layer height 2 perimeters At least 15% infill Instructions: Glue the parts together with plastic glue, hot glue, or superglue. If throwing, hold the glider…

Downloads
585
Likes
33
Rating
5
P
Printablestuxiy

Learning Blade 3D Maker Quest - Lightweight Glider

Overview and Background Have you ever considered how aircraft are designed and tested? The search of faster, safer, and better air travel is constantly producing improvements to aircraft designs. An important step in the design process is…

Downloads
575
Likes
28
Rating
0
P
Printablesmhu

Logitech G Pro X Superlight Glides / Skates / Mouse Feet

I always wanted to print my own Mouse Feet Skates so as soon as i bought my Bambu P1P I decided to measure my Logitech G Pro X Superlight mouse and make it happen :) This is the first version (and probably the only one) I've created for…

Downloads
546
Likes
50
Rating
5
P
Printableshangloose

MotorPod for 6384, Gong V2 / Slingshot Hoverglide / AXIS 760 Mast / UNISEX

Support only needed for the Motorpod! Screws: 4x M4 x 25 V2A / 2x M5 x 16 V2A / Inserts: 2x M5 https://foil.zone/t/diy-6384-foil-drive-assist-from-south-germany/19307

Downloads
544
Likes
30
Rating
5

Sugar Glider

Here is the Sugar Glider model! This free listing includes only the single-color STL for printing. On my Patreon you'll get the multicolor 3MF files, easy-to-paint STLs, keychain versions and split-color files, plus access to 60+ other…

Downloads
543
Likes
89
Rating
5
P
PrintablesIvan Gonzalez

dg 800 glider scale 1/72

On my cults page you can download planes like this one on a larger scale and detail, they are for sale for 10 euros https://cults3d.com/es/usuarios/ivangonzalezm/creaci%C3%B3n Print Settings Printer Brand: ELEGOO Printer: ELEGOO Neptune 2…

Downloads
538
Likes
84
Rating
4.5
P
PrintablesJoeRixon

Ultralight glider V3 (170mm)

Ultralight glider by robotfriend scaled down to print on the mini+ or smaller printers. UPDATED TO V3 No modifications have been made aside from the scale down but it still flies well.

Downloads
529
Likes
45
Rating
4
P
PrintablesCaptain Science

Straw-Launchable Plane Glider

This is my first upload here – I spent a huge amount of time over the last few weeks designing and perfecting this, and in the end I decided to share it. This is a working, balanced, aerodynamic glider that can be thrown, or launched from…

Downloads
504
Likes
66
Rating
5