23,183 models
Awesome Skull Bowl for Halloween candy/decoration. I would love to see your makes! Post them below. This is easily one of the coolest 3D prints I've done. It was designed for no supports, but I would use supports of at least 75+ degree…
Print approx. €13.56–€16.58 excl. taxPreliminary estimate for one variant
Dimensions (LxWxH) 170 x 64 x 36 mm (100% scale) Basic information A long awaited, fifth addition to the Articulated Sea Life collection, the Beluga whale is here! It was designed to print as easily, and as reliably, as possible. No post…
Print approx. €2.54–€3.11 excl. taxPreliminary estimate for one variant
Ein kleiner Kürbis zur Dekoration oder als kleines Geschenk, mit einem kleinen Loch im Stiel zum Aufhängen. Für den Druck benötigen Sie keinen Multi-Extruder, da Kürbis und Stiel separat gedruckt werden. Um den Stiel am Kürbis zu…
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for PETGSource material: PET
Ghost Emoji Decorations! I hope you all have a spooky yet happy Halloween this year with these super cool Emoji Ghosts! Version 4 - 24/09/2023: Updated STL Files released. Added a thicker base for each 'foot' of the models, making it much…
Print approx. €7.37–€9.01 excl. taxPreliminary estimate for one variant
iPad Halter in einem geschwungenen Design. Auf den Bildern ist der Halter mit einem 12.9 Zoll iPad Pro zu sehen. In der Mitte habe ich den Halter ausgenommen, damit mit dem Finger der Bildschirm nach oben gestreift werden kann. Der Halter…
Print approx. €9.23–€11.28 excl. taxPreliminary estimate for one variant
If you're running late with your Halloween decoration or just don't want to use up half a spool of filament for a decent sized pumpkin then these models were made for you! I've designed these Jack-o'-lanterns as a late entry for the…
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant
[Update] ---2023/11/13--- New version released on here!! Flexi Humpback Whale - New Type(print-in-place) by 3D_Flexseeds | Download free STL model | Printables.com New model was created and the mouth was made to open and close. This is a…
Print approx. €2.92–€3.57 excl. taxPreliminary estimate for one variant
I started with just the angry ghost earrings version. But I wanted to have some more options so I've added those too. If you are missing a variant, please let me know in the comment section! Dimensions (hwd in mm): 24.95 x 25.65 x 1.3…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant
🇮🇳 Welcome to India! Here is another of the New 7 Wonders of the World on Printables.com ! The Taj Mahal , located on the south bank of the Yamuna river in the Indian city of Agra, was commissioned in 1632 by the Mughal emperor Shah Jahan…
Print approx. €3.37–€4.12 excl. taxPreliminary estimate for one variant
Halloween hanging. Added a ghost and adjusted the hanging point to the center of gravity. Should hand straight now.
Print approx. €2.31–€2.83 excl. taxPreliminary estimate for PETGSource material: PET
Print Settings: Printer:Any Rafts:No Supports:Yes Filament brand:Any (my Aurapol) Filament color:Any Brown Filament material:PLA Notes: 0.2 mm layer 0.4mm nozzle 3 perimeter 0% infill 1mm retraction 0.4 Z-hop 50 perimeters speed 215C temp…
Print approx. €1.52–€1.85 excl. taxPreliminary estimate for one variant
Halloween Ghost made from a Blender cloth simulation! Great for decorating your home for Halloween! The inside is hollow, allowing for an electric tea light to sit inside the ghost! Works with electric (fake) candles - DO NOT USE real…
Print approx. €5.21–€6.37 excl. taxPreliminary estimate for one variant
Test the limits of your printer! Pin Support Sphere ChallEnge is a way of testing your printer's capabilities. It is designed to be hard to print, so only well-calibrated printers with quality filaments will print out a nearly perfect…
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
*UPDATED to V2 - The mustache is now more robust. It prints very well, is sturdier than V1, and perhaps most importantly looks very suave (as all well-maintained mustaches do). I believe that this will print very well at smaller sizes if…
Print approx. €12.88–€15.74 excl. taxPreliminary estimate for one variant
Skull Pop Can Holder / Chalice.
Print approx. €10.04–€12.27 excl. taxPreliminary estimate for one variant
This is a danman's remix Halloween Crow. I printed this in Prusa Galaxy Black PLA. Head is separated into two pieces. There are prepared holes for 5mm diameter LEDs and also CR2032 battery holder is included. Head is glued by two small…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant
For all makers out there making soft bates! Shallow screws are expensive and now with this tool you can make them yourself. Print instructions Video for how it works: https://youtu.be/zpEGzjKB8no Other needed components: Screw holder is…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
This is a part of the Botanical Collection available in our Printables Club. A geometrical design inspired by plant ornaments and crystal structures. Very easy to print and looks great in modern interiors! Print information: Recommended…
Print approx. €1.24–€1.52 excl. taxPreliminary estimate for one variant
Burj Khalifa , the tallest building in the world, 1:1000 scale model There are several 3D models of this building on the Internet, I printed one myself as a gift for my cousin, who was in Dubai and saw this skyscraper. I am fascinated by…
Print approx. €0.72–€0.88 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (organic/tree support) Scale it as you like :)
Print approx. €25.42–€31.07 excl. taxPreliminary estimate for one variant
Changelog: Nov 30 - Added pegged bottom model that should interface with the top, for non-magnetic versions. Added trim option for an accent around the grille. Dec 1 - Added MMU versions. Dec 4 - Fixed Pegged pegs not pegging. Decreased…
Print approx. €7.48–€9.14 excl. taxPreliminary estimate for one variant
Dyson V11/V10/V8/V7 Accessory Mount/Holder Additional double holder for Dyson accessories as wall mounting. This mount has only been tested with the V10, but it should also work with the V7, V8 and V11. This is a remix (original is from…
Print approx. €3.51–€4.28 excl. taxPreliminary estimate for one variant
We were still missing a child-friendly but spooky little house in the shape of a coffin for our Halloween decorations. It is perfect for two LED tea lights so that the windows are illuminated in the dark for a great atmosphere. The new…
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
Das ist ein Halter für die Matten von meinem Plotter. In der Mitte befindet sich ein Loch um es mit einer Schraube zu befestigen. Ich habe das PLA+ mit 205 Grad und 65 Grad gedruckt. Die Ecken sind abgerundet und passen sich super an.
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for one variant
Perníková chaloupka
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
Marshall Music Logo was recreated with a Black outline.
Print approx. €2.07–€2.53 excl. taxPreliminary estimate for one variant
Heavy-Duty holder for Milwaukee M18 batteries, which was created specifically for the larger high-demand and new FORGE batteries. The holder can be mounted on the wall (designed for 4.5 or 5.0 mm screws), but since the batteries also lock…
Print approx. €3.17–€3.88 excl. taxPreliminary estimate for one variant
You can insert and remove the Juice Booster 2 from the wall mount without any tools within seconds. So you can easily take your charging cable with you, to be able to load your electric car on public loading stations and as well use it as…
Print approx. €6.62–€8.09 excl. taxPreliminary estimate for PETGSource material: PET
This stylish pumpkin Halloween decoration looks great during the day and creates a mysterious atmosphere when the lights go out. Simply place an LED tea light in the pumpkin and enjoy the flickering shadows through the voronoi pattern.…
Print approx. €7.93–€9.70 excl. taxPreliminary estimate for one variant
Fensterhalterung für einen Mini Herrnhuter-Stern
Print approx. €0.37–€0.46 excl. taxPreliminary estimate for one variant
A larger pyramid style challenge coin holder designed to display 10 coins of 40mm diameter displayed in 45mm diameter cases. Want a smaller version? Check out my smaller 6 coin pyramid holder here ! Prints great in PLA at 0.2mm with…
Print approx. €8.66–€10.58 excl. taxPreliminary estimate for one variant
Drill Bits Holder Holder for a total of 23 drill bits with a size from 1 mm to 12 mm in 0.5 mm steps. The holder can be mounted on a wall with 2 countersunk screws. --- Bohrer-Halterung Halterung für insgesamt 23 Bohrer mit einer Größe…
Print approx. €8.25–€10.08 excl. taxPreliminary estimate for one variant
V2 is now available. Stackable tea bag holder Dimensions: 6.8 cm wide, 8 cm deep, 10 cm high +++++++++++++++++++++++++++++++++ Stapelbarer Teebeutelhalter Maße: 6,8 cm breit, 8 tief cm, 10 cm hoch
Print approx. €2.37–€2.89 excl. taxPreliminary estimate for one variant
Pen Holder Gyroid Round (80mm and 100mm diameter) Stl-Files (without configuration) 3mf-Files (with configuration) for MK3S and Mini Printfiles (G-Code) for MK3S and Mini Stifthalter Gyroid Rund - (80mm and 100mm Durchmesser) Stl-Dateien…
Print approx. €4.29–€5.25 excl. taxPreliminary estimate for one variant
I used Meshmixer to cut out a few more spots and the nose for a multicolor print. Printing time about 21 hours with Prusa MK3S+MMU2S with PLA, 15%Infill. How I Designed This Category: Toys & Games
Print approx. €16.42–€20.07 excl. taxPreliminary estimate for one variant
Toolbox socket organizer for 1\2 inch sockets. The base is designed to accept a 10x3mm magnet as the base is printed at a .2 layer height. I printed all of these on a Creality CR-10S and placed a M25 pause between layer 16 and 17 in order…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant
Spiral Mode/Vase Mode You can print it with: Nozzle 0.4/0.6/0.8mm (You can print 0.8mm line width with 0.4/0.6 mm nozzle) Layer Height 0.2mm/0.4mm (Recommended) Bottom Layers 4-10 Layers Scale it as you like :) happy fall season
Print approx. €1.07–€1.30 excl. taxPreliminary estimate for one variant
Ich habe für mein Abarth 595 eine Verlängerrung Erstellt, damit Flaschen/Dosen besser halten. Die Verlängerung passt perf Passt für die Fiat 500/Abarth ab bj. 2009-2017 (bis Gen.3) Erstellt habe ich es mit Solid Edge 2024 und stelle hier…
Print approx. €6.41–€7.83 excl. taxPreliminary estimate for one variant
Prusa MK3S+ Druckblechhalterung, Prusa MK3S+ Steel plate holder
Print approx. €4.93–€6.02 excl. taxPreliminary estimate for one variant
I found serious security fault on vans and campervans, which can be found on all type series built from 2006 and on. In the past several years I had been employed as a chauffeur and a garage administrator in the caravan rental company,…
Print approx. €0.86–€1.05 excl. taxPreliminary estimate for PETGSource material: PET
Goku in Halloween in Fox Costume. Added Goku2.3mf and associated gcode on 8/30.2023. overall .4 offset with extra .6 offset at base of tail. From: Dragon Ball FighterZ. Added deep UV Textures.
Print approx. €20.82–€25.44 excl. taxPreliminary estimate for one variant
Bird fat balls are sold without net (yeah not rubish) - but you need a cage to offer them to the birds. I started to use the thingiverse model below, but had problems to print. So I constructed a new version - easier to land and print ;-)…
Print approx. €5.48–€6.69 excl. taxPreliminary estimate for one variant
If you like my designs - consider buy me a Coffee :) https://www.buymeacoffee.com/ripped Halter für 3-Fach Steckdose mit Ausschnitten für USB und Kabel. Kann mit Senkkopfschrauben hängend angeschraubt werden. Die Maße sind Breite = 54mm…
Print approx. €2.16–€2.64 excl. taxPreliminary estimate for PETGSource material: PET
I needed a spring cover for my switch boxes but due to Covid 19 all hardware stores are closed. So I created my own version of it. Print instructions The part can be printed without support structure. Printed on a Prusa Mini + with an…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant
Am besten ist es den Halter aus PETG zu drucken da dieses Filament die nötige Festigkeit hat und auch flexibel genug ist die Vibrationen zu verarbeiten.
Print approx. €0.97–€1.18 excl. taxPreliminary estimate for PETGSource material: PET
Gothic Chalice. Lost to many details in the offset. I will come back to this in the not so near future. Way too much work to fix and I will need to start over. But in the meantime--- I will leave this here.
Print approx. €20.85–€25.49 excl. taxPreliminary estimate for one variant
These knobs are inspired by real control knobs on Marshall guitar amps . Come in 2 sizes: regular size and 200% size. They have 3.5mm diameter blind hole for M4 bolt or 4mm screw. But please be prepared to use drill, because these small…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
Vampire Teeth – 3D-Printed Halloween Accessory Perfect for your vampire costume: these lightweight, reusable vampire teeth are 3D-printed and, with PLA Glow , deliver a spooky glow-in-the-dark effect. Easy to print, quick to assemble, and…
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant
Happy Halloween !!!
Print approx. €1.39–€1.70 excl. taxPreliminary estimate for one variant
Info: easy print no supports nice fit on original bricks
Print approx. €0.87–€1.06 excl. taxPreliminary estimate for one variant
Remix of the Hazard Triangle Holder for BMW I3 Trunk. https://www.thingiverse.com/thing:4671592 Things Changed: Optimized Screw Holes for longer Threads to fasten it Added a Hinge and a flap to secure the Hazard Triangle in the Holder…
Print approx. €2.06–€2.52 excl. taxPreliminary estimate for PETGSource material: PET
Monkey Skull Chalice. HOW TO VID.
Print approx. €14.90–€18.22 excl. taxPreliminary estimate for one variant
Pumpkin lamp for table decoration e.g. on Halloween. !!Attention only use with electric tea light!! The tea light I use is 45mm by 45mm by 45mm in dimensions and fits easily. Works absolutely great and looks great. I uploaded two variants…
Print approx. €0.80–€0.97 excl. taxPreliminary estimate for one variant
Just been recently diagnosed with late onset asthma. Sucks giant donkey stones. Anyway I need to carry these two inhalers now, one for daily use, one for when things flare up. I didn't want these to get damaged (happened already) or…
Print approx. €4.75–€5.81 excl. taxPreliminary estimate for one variant
UPDATE 2025-08-21 Based on some reviews and comments, I've revised the models and this time separated the models for the 7590 and 7590AX. I've moved the mount for the 7590 slightly. I removed the covers from my cabinet and my neighbor's…
Print approx. €2.55–€3.12 excl. taxPreliminary estimate for one variant
This print is adjusted to the size of german yellow trash bags and to the cheap trash bags from Kaufland brand. -- Tolle Lösung, um Platz in den Schubladen zu sparen! Optimiert für Kaufland Müllbeutel und dem Standard-Gelbensack. Restmüll…
Print approx. €3.46–€4.22 excl. taxPreliminary estimate for PETGSource material: PET
Passt für Stangen mit 12mm
Print approx. €1.71–€2.09 excl. taxPreliminary estimate for one variant
This was designed as a greetings card but also suitable as a decoration. The photo shows it printed using Prusament Galaxy Black PLA and a generic white PLA also bought from the Prusa shop. I set a manual colour change using PrusaSlicer.
Print approx. €1.53–€1.87 excl. taxPreliminary estimate for one variant
Ich habe mich immer geärgert, dass das Eisfach des Thetford-Kühlschranks nicht offen blieb, wenn wir das Fahrzeug in den Winterschlaf geschickt haben. Natürlich geht auch ein Korken. Diese Ecke bleibt aber, wo sie hin soll. Mein…
Print approx. €0.82–€1.00 excl. taxPreliminary estimate for PETGSource material: PET
Nice and detailed wall art silhouette of a Dodge Challenger SRT. Adjustable size. I accept suggestions for new models.
Print approx. €0.95–€1.16 excl. taxPreliminary estimate for one variant
De: Dient dazu, den Stecker des Defa MiniPlug Anschlusskabels sicher zu verstauen, während er nicht benötigt wird. Zusammenbau: Wird mit vier M4x16mm Zylinderkopfschrauben ans Kabel geklemmt Druckeinstellung: 0.4 Nozzle 0.2mm Layer Height…
Print approx. €2.33–€2.84 excl. taxPreliminary estimate for PETGSource material: PET
Ergänzung 11.01.2024 Habe eine Ausführung mit Aussparungen für den TAE und USB-Anschluss hinzugefügt. Diese habe ich nicht getestet. Bitte um Feedback, wenn es nicht passt!!!
Print approx. €3.01–€3.68 excl. taxPreliminary estimate for one variant
Hello, Here is a sexy, busty ghost girl model for you. The figure is beautifully detailed. Spooky for Halloween, yet sexy. Suitable for dioramas or display. The size can be adjusted in your slicer. It works great. It prints very nicely.…
Print approx. €5.25–€6.41 excl. taxPreliminary estimate for one variant
I designed this cute shopping cart coin with the Harry Potter Deathly Hallows emblem. Ho disegnato questo simpatico gettone per il carrello della spesa con l'emblema dei doni della morte di Harry Potter.
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
Spare part for designed for Marshall's Adventure city fire truck, but probably will work for other Marshalls truck as well. Some of Chase's trucks has similar devices so i included one for them too. I have printed it split in a half using…
Print approx. €0.97–€1.19 excl. taxPreliminary estimate for PETGSource material: PET
UPDATE: several ppl said the labels were too deep and left holes. this version corrects that. All .STL files are at 100% size (~41 mm wide) My take on a stackable daily (up to 3 times/ day) pill box system. sections are easily unscrewed…
Print approx. €0.97–€1.18 excl. taxPreliminary estimate for one variant
Ein Model zum Aufhängen der Stihl Motorsäge an der Wand Material: PLA Füllung: 15% (Gyroid) Schichtdicke: 0,2mm Getestet bei der Stihl MS 171, MS 241, MS 661
Print approx. €2.54–€3.11 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Print approx. €12.98–€15.86 excl. taxPreliminary estimate for one variant
Gestern habe ich einen kleinen schlichten Zahnbürstenhalter erstellt und über Nacht gedruckt. Warum 3-teilig? Damit man die Wandhalterung getrennt vom eigentlichen Zahnbürstehhalter hat. Den kann man leicht abnehmen und reinigen oder…
Print approx. €4.36–€5.33 excl. taxPreliminary estimate for one variant
Der Nespresso Kapselhalter ist gemacht für das Prusa Wooden PLA Filament. Nur mit diesem habe ich eine gute Qualität hinbekommen. Für den Druck beider Teile habe ich die MMU 3 ausgeschaltet und den Extruder direkt gefüttert. Beide…
Print approx. €6.65–€8.13 excl. taxPreliminary estimate for one variant
ENG Sharpen blocks of dressmaker's chalk with this sharpener. Sharp edges allow you to draw fine lines on your fabrics. It is very easy to use just move the block of chalk back and forth in the V-shaped groove at the top, until the…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for PETGSource material: PET
Eine Saifenschale / Unterlage mit abtropfteil und Ablauf. Die verfügbaren haben meiner Frau alle nicht zugesagt, also habe ich versucht eines nach Ihrem Geschmack zu drucken, das ist dabei herum gekommen. Es gibt 2 Versionen, die 2.…
Print approx. €1.89–€2.31 excl. taxPreliminary estimate for one variant
[EN] When writing with chalk, whether on the blackboard or on the sidewalk-pitch, the whole chalk not only breaks but especially dirty hands. The whole chalk is inserted into this holder and by gradually tightening the bottom screw it is…
Print approx. €1.49–€1.82 excl. taxPreliminary estimate for one variant
Es wird ein Magnet benötigt, wie im Link oder ähnlich.…
Print approx. €2.11–€2.57 excl. taxPreliminary estimate for PETGSource material: PET
Outlet holder for a slightly rounded outlet bar. I found some other other holders, which did not quite fit this three-plug, slightly-rounded design of my particular outlet, so I designed my own. It only needs one part to hold a short…
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant
If you like my designs - consider buy me a Coffee :) https://www.buymeacoffee.com/ripped Halter für 3-Fach Steckdose mit Ausschnitten für USB und Kabel. Kann mit Senkkopfschrauben hängend angeschraubt werden. Die Maße sind Breite = 52mm…
Print approx. €4.99–€6.09 excl. taxPreliminary estimate for PETGSource material: PET
I made small adjustments so that the structure. I recommend reducing the printing speed to 70% either from the machine or the program you are using to 20-30% to avoid errors. Remember to add supports to ensure a proper attachment.🧀🧀 I'm a…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
Decided to make myself a key holder that looks like an old JMP Marshall Head unit. All of the prints should be self explanatory. the Main body, and the handle should be the only items requiring any support material. A dab of super glue…
Print approx. €18.78–€22.96 excl. taxPreliminary estimate for one variant
Wandhalterung für Verlängerungskabel oder Schlauch. Kurze und Lange Version. Wird ohne Support stehend gedruckt. Befestigungslöcher haben 6mm.
Print approx. €5.75–€7.03 excl. taxPreliminary estimate for PETGSource material: PET
This model can be printed in two colors or If you prefer to print the model in a single color I hope you enjoy it! The speed will depend on the machine and the type of PLA you are using. I always recommend that the first layers be printed…
Print approx. €18.62–€22.75 excl. taxPreliminary estimate for one variant
Ever wanted to eat candy out of a suburb dweller's Gothic horror dream mansion? Today is your chance! This print combines my favourites Halloween films mansions with my favourite printing mode, the vase mode. This hellish contraption…
Print approx. €2.05–€2.50 excl. taxPreliminary estimate for PETGSource material: PET
Filamet spoolholder X2 The filament spool holder X2 for Prusa MK3 can hold any 1kg standard spool (also the 2kg Prusament PLA Recycled) as well as with the 2 different extensions spools up to 4kg or a maximum spool diameter of 350mm. The…
Print approx. €0.56–€0.69 excl. taxPreliminary estimate for PETGSource material: PET
I needed some shallow trays to keep personal care products off my bathroom counter to protect the surface. I designed several sizes of square and rectangular trays to meet this need. The trays range in size from 100 mm X 100 mm to 200 mm…
Print approx. €1.90–€2.32 excl. taxPreliminary estimate for PETGSource material: PET
“Good joinery is done with a pencil, great joinery is done with a marking knife” -Jonathan Katz Moses. This addition to the Half Height Helper will let you add a carbide insert to use for scoring your material. The issue I have with the…
Print approx. €0.67–€0.81 excl. taxPreliminary estimate for one variant
These are two remixes of the bit holder insert for the Miniware ES15 cases from 3DP-MAMSIH , 51m0 and PjotrStrog . The bit holder allows 55 bits to be accommodated in the case. The version with the magnetic/finger recesses holds 47 bits.…
Print approx. €1.24–€1.52 excl. taxPreliminary estimate for PETGSource material: PET
This model is a magnetic chalk clip designed for Triangle chalk, but any chalk of the same dimension should work (as they are all roughly the same size). There is a magnet embedded in the chalk holder and the chalk clip so that the clip…
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant
Im a Halo Fan since Combat Evolved (seems like yesterday); Recently while playing, for the first time i stopped and looked at a Fusion Core (until now ive throw them to countless enemies) and realized that, i can probably design and print…
Print approx. €0.96–€1.18 excl. taxPreliminary estimate for one variant
I made a book holder from the movie harry potter from the logo of the deathy hallows without support line height 0.2 UPDATE 23 MARCH 2023: I made a 2nd version so that it remains more stable with the help of a book.…
Print approx. €4.38–€5.36 excl. taxPreliminary estimate for one variant
Mountainbiker, deren Bike mit versenkbarer Sattelstütze ausgerüstet ist, kennen das Problem, wohin mit dem Rücklicht? Viele Rücklichter sind dafür ausgelegt, am Sattelrohr befestigt zu werden, das schränkt natürlich die Handhabung der…
Print approx. €0.22–€0.26 excl. taxPreliminary estimate for one variant
This Model is designed to be mounted on different surfaces with M4-screws. It also has a self-locking-mechanism.
Print approx. €2.04–€2.49 excl. taxPreliminary estimate for one variant
Eine Halterung für das Verschrauben von Schildern oder anderen Dingen an einem Doppelstabmattenzaun.
Print approx. €1.94–€2.37 excl. taxPreliminary estimate for PETGSource material: PET
Pretty straight forward build for keeping your print area cleaner. The amount of small bits of plastic that comes from printing is aggravating. Vslot clovers are nice to keep that area clean, but the whole printer gets dusty and covered…
Print approx. €0.28–€0.35 excl. taxPreliminary estimate for PETGSource material: PET
A friend of mine has a particularly picky cat that needed a raised bowl without sharp corners that “trap” food. I know what you're thinking, “classic cat”, am I right? Anyway, I am always happy to help. There was already a design on…
Print approx. €5.62–€6.87 excl. taxPreliminary estimate for one variant
stapelbare Visitenkartenhalterung Ich hoffe ihr kommt bis zur 10. Etage und könnt mir dann über die Stabilität berichten. :) Die Füße können ebenfalls immer weiter gestapelt werden, jedoch würde ich empfehlen die Teile miteinander zu…
Print approx. €3.58–€4.37 excl. taxPreliminary estimate for one variant
Dieser Halter wird an einer beliebigen Tasse eingehängt und kann neben einem Teebeutel auch Zucker, Kekse oder andere Dinge für das Servieren aufnehmen. Oder dann den benutzten Teebeutel aufnehmen. Der Halter steht auch stabil neben der…
Print approx. €1.43–€1.74 excl. taxPreliminary estimate for PETGSource material: PET
Zum sicheren halten von Gläsern, Flaschen, Dosen etc. an Geländern. Für Geländer aus Quadratrohr mit 40x40mm. Mit Bohrungen im Boden, sodass sich kein Wasser, Dreck, Regen etc. sammeln kann. PETG mit 25% Infill sind ganz gut
Print approx. €15.77–€19.27 excl. taxPreliminary estimate for PETGSource material: PET
Count Snackula – Get One If You Dare I wanted to create a Halloween model that combines a creepy atmosphere with a clean, sculptural design. If Dracula had a weakness – it would be candy. This vampire candy bowl combines style,…
Print approx. €0.16–€0.19 excl. taxPreliminary estimate for one variant
Practical business card holder for the presentation and output of up to 50 business cards in standard format 85 x 55 mm. When the box is empty, a QR code appears with which at least the digital business card can be scanned. If you print…
Print approx. €1.95–€2.39 excl. taxPreliminary estimate for one variant
Schild mit der Aufschrift “Infoschalter für besonders bescheuerte Fragen” Eignet sich zum aufhängen Nur 2 Farbwechsel für den gesamten Druck
Print approx. €1.91–€2.33 excl. taxPreliminary estimate for one variant
This wire holder is designed for a wire with a diameter of 2.5 mm and a base frame with a diameter of 14.5 mm. Printed with 50% infill. You are welcome to change the stp file according to your measurements. Or you write down what…
Print approx. €0.85–€1.03 excl. taxPreliminary estimate for one variant
