6,821 models
Fits Raspberry Pi 4 B and Hat (SenseHat) This Case also snaps to Domed Top from ... "Raspberry Pi4B Case for Noctua 40mm x 10mm Fan" Toggle and access for camera and GPIO and Toggle. Screws... Pi takes M2.5 (a set of 4 screws and nuts…
Print approx. €4.16–€5.09 excl. taxPreliminary estimate for PETGSource material: PET
Greebles! Entry panels, hatches, and more! No support required Designed on Tinkercad. Enjoy! ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ More fun stuff: Construction: Building under…
Print approx. €5.75–€7.03 excl. taxPreliminary estimate for one variant
Case for Raspberry Pi and Sense-Hat board SenseHat NOT required! Breakaway Supports included. New .35mm smaller Z, led window, pop-outs for joystick and GPIO, camera slot and insert cover, io ports edited. Snaps together Bracket for Case…
Print approx. €2.79–€3.41 excl. taxPreliminary estimate for one variant
What is that? What's in there? Well in that case. __________________________________________________________________ 🧡 Let’s Both Earn Some Prusameters! If you like this model and are thinking about getting a new Prusa printer, use my…
Print approx. €3.03–€3.70 excl. taxPreliminary estimate for one variant
I recently made a restroom sign for my grandpa's pool bathroom. This is another variation that's a little more cheeky. Remember we don't care who you are, what you are, or what you do in the bathroom just wash your hands!
Print approx. €3.64–€4.45 excl. taxPreliminary estimate for one variant
This Case fits a Raspberry Pi 3B and also fits a SenseHat Board and has a second cover for GPIO, Camera and Toggle access... Top vents mirror display grid. Case is designed for Screw down and will accommodate the board without screws.…
Print approx. €1.12–€1.37 excl. taxPreliminary estimate for PETGSource material: PET
A simple bracket holding the case for a Raspberry Pi 3 B+ and SenseHat boards.... serving Octoprint etc. 2 M3 cap screws required. Print instructions ABS no supports.
Print approx. €1.73–€2.11 excl. taxPreliminary estimate for one variant
Walter White and Heisenberg Hat. With Added Scalp resized to help create boolean and design your own hat. Use the scalp ( walterwhitescalpforhatboolean ) to remove the appropriate space in your hat so it will fit. Baseball cap, French…
Print approx. €11.67–€14.27 excl. taxPreliminary estimate for one variant
A plant pot inspired by the structure of a shattering mirror. Used Filament: This model was printed using Brass High Gloss PLA from FormFutura The FormFutura team was so nice to send us some samples and we had the pleasure to review this…
Print approx. €2.89–€3.53 excl. taxPreliminary estimate for one variant
Simple Blank Keychain, luggage tag, whatever you need. My page on Prusa https://www.prusaprinters.org/social/93679-stoneman/prints My Thingiverse page https://www.thingiverse.com/stoney21/designs Print Settings Printer: Creality ender 3…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
Apple Pencil Holder Also available for generic pens: CLICK_HERE Save your pencil's tip. Does not put pressure on your pencil's tip through a tapered canal so the pen does not rest on the tip but on the body. Printing: 4 walls 20% ZigZag…
Print approx. €1.38–€1.69 excl. taxPreliminary estimate for one variant
I liked the idea behind this design , but it was too flimsy, even printed on PETG it kept breaking when dropped on the floor. This is designed for the Black Diamond “HotForge” carabiner from their quick-draws, but should fit any of the…
Print approx. €2.62–€3.21 excl. taxPreliminary estimate for one variant
Made this model from scrath with caliper measurements after I found a look alike model that didn't fit my snapback (the holes and pins were too small) PLA model with ironing to make the finish a little smoother. May require some cleanup…
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant
I wanted a hat stand for my Australian “Akubra” hat. The hat deforms quickly if stored on a flat surface. Using Harry_D60's design from Thingiverse as inspiration (https://www.thingiverse.com/thing:3065011), I designed a two-part hat…
Print approx. €2.87–€3.51 excl. taxPreliminary estimate for one variant
This soap dish is a classic. You can change some parameters directly in Fusion360. The F3D file is included. You can (and probably should) print the two parts with contrasting color for a better look. Related work I've also published a…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
A deeper version of Nordheim's iPhone stand that can fit iPhone with Clear Case and MagSage Wallet on. Works fine without case/wallet as well. Prints well laying on the side with 5% infill and 0.20mm layer height.
Print approx. €2.14–€2.62 excl. taxPreliminary estimate for one variant
I made this 3D logo from a picture using 3D Builder
Print approx. €3.35–€4.09 excl. taxPreliminary estimate for one variant
Obviously I don't own the LEGO ® brand, and the fact that this fits their bricks doesn't mean they support this model. Go buy their products if you want quality, this is just an homage to their brand, not a LEGO ® supported product. I…
Print approx. €1.70–€2.08 excl. taxPreliminary estimate for one variant
NOTE! The whiskers could not be printed! I printed here with tree supports and i used an AMS for the multicoloring. I hope that's it is a lovly Christmas Gift or a Cute Decoration! Check out my other models HERE ! Enjoy and have a great…
Print approx. €0.95–€1.16 excl. taxPreliminary estimate for one variant
This one was tricky! I wanted to combine the upcoming holiday with the vase competition and add my twist! This spiral vase includes an integrated handle that can be easily detached to make the vase into something more. Pop the handle into…
Print approx. €2.63–€3.22 excl. taxPreliminary estimate for one variant
ИГРУШЕЧНЫЙ ПИСТОЛЕТ, СТРЕЛЯЮЩИЙ ЛЕТАЮЩИМИ ТУРПИННЕРАМИ. ИГРУШЕЧНЫЙ ПИСТОЛЕТ, КОТОРЫЙ СТРЕЛЯЕТ ЛЕТАЮЩИМИ ТУРПИННЕРАМИ. НЕ ТРЕБУЕТ ДОПОЛНИТЕЛЬНЫХ ДЕТАЛЕЙ. ПРОСТО ПРИНТЕР И МАТЕРИАЛ. НЕКОТОРЫЕ ДЕТАЛИ ПЕЧАТИ С ОПОРАМИ.
Print approx. €8.21–€10.03 excl. taxPreliminary estimate for one variant
the colors I used: white (base) black (3 layers) purple (3 layers) Gold (last 3 layers) 6mm hole keyring 40mm x 35mm
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant
This is a remix of the 2/6 wine glass holder I found on Thingverse. http://www.thingiverse.com/thing:1910037 I only needed capability to hold 4 glasses, and the snap-together version I found a little too hard to give to older people :)…
Print approx. €6.22–€7.61 excl. taxPreliminary estimate for PETGSource material: PET
Young Girl With Roses in Her Hat Le Jardin de Rodin, Paris, Ile-de-France, Frankreich
Print approx. €11.84–€14.47 excl. taxPreliminary estimate for one variant
This is a revision of an old design I made; this one is a little smaller and prints as one piece. Has 10 standard USB sockets. Print instructions Support is needed everywhere. Use tweezers to take out the little bits of support found in…
Print approx. €9.45–€11.55 excl. taxPreliminary estimate for one variant
Boston Scally Hat collection is growing, designed a wall hanger for them. Easy hang with 3m Command Strips, med. refills. Doesn't need infill, it's sturdy enough.
Print approx. €1.06–€1.30 excl. taxPreliminary estimate for one variant
Print with supports
Print approx. €5.96–€7.28 excl. taxPreliminary estimate for PETGSource material: PET
Magnetic insert with hidden three 6mm magnets with arbitrary thickness. Magnets should not need to be glued, they should hold by the friction (mine do). Even with “standard” 6x2 neodymium magnets (e.g., usable with Gridfinity) it can hold…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for PETGSource material: PET
Introducing the Gingerbread Deluxe - where festive fashion meets cookie charisma! Not only does this cheeky sweet sensation have the most stylish Christmas hat on the tree, he also has some serious gingerbread dance moves (articulated).…
Print approx. €0.95–€1.16 excl. taxPreliminary estimate for one variant
Fixed Bipod for Hatsan Flash QE PCP Air Rifle. No extra tools or hardware required to install. This design is not meant to fold up, but comes off the rifle easily enough. Bipod slides on to the front Picatinny rail and is held in place by…
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
Easy to make a Chick with top hat keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant
Ce modèle représente un chat drôle et expressif , dont la posture ou les pattes servent à maintenir un smartphone en position. Parfait pour ajouter une touche de fantaisie à votre bureau ou table de chevet. Impression : Adaptée pour les…
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for one variant
Original didn't provide Gcode. This is for people that just want to download and print without knowing how to change Temps. This is the right thing for you. I did not create this model, I changed all the temps to be ready to print. Enjoy
Print approx. €0.62–€0.76 excl. taxPreliminary estimate for one variant
Two Llamas in Hats Carl and Paul
Print approx. €6.22–€7.60 excl. taxPreliminary estimate for one variant
Just a quick remix of Ninetales. There is some weird geometry inside Ninetales's chest that (I think) causes a gap in its body. I've removed some (not all) of the weirdness which solved my issue. I've added Nidoking and Jigglypuff too who…
Print approx. €3.38–€4.13 excl. taxPreliminary estimate for one variant
Hatsune Miku : Lego Like
Print approx. €5.55–€6.79 excl. taxPreliminary estimate for one variant
Hathi elephant 3D woogle neckerchief scarfring. Canuto o pasa pañuelo de Hathi, el gran elefante
Print approx. €1.03–€1.25 excl. taxPreliminary estimate for one variant
First things first. I can’t really take any credit for any of this model. The hat is an awesome model that I just made bigger and added some modifiers. The only reason I’m uploading it as a model is to make it easier for other ring owners…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
Pin that supports the trunk lid of a Peugeot 208. On the picture there is the original part and the printed version.
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
A pirate hat with skull and crossbones that fits on top of the Marvin keychain test print by 3DHUBS. Also fits on top of other things. Just for fun! The Marvin test print is here: https://www.printables.com/model/3118-3dhubs-marvin…
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for one variant
I got the opportunity to work with a 3D scanner and I scanned some skeleton I had lying around, because I thought it needed a nice hat. If you love this design and want to see more fun projects like it, consider joining my club on…
Print approx. €2.26–€2.76 excl. taxPreliminary estimate for one variant
INFO The model is based on this holder: Usually the holder is sold with the bidet as a set, but I only want the holder. So, I decided to print a replacement to lower the cost and to challenge myself with 3D modeling and gain more…
Print approx. €2.14–€2.61 excl. taxPreliminary estimate for PETGSource material: PET
I intended to tie this to my lifejacket for paddleboardin' and kayakin'. I adapted the design to work well with a fat nozzle because that's what I've got. As a bonus, the double-thickness walls increase crush-resistance. My adaptations in…
Print approx. €0.59–€0.73 excl. taxPreliminary estimate for PETGSource material: PET
A clip that attaches to a standard hardhat that holds a #2 pencil
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
Start with White, then Grey, last go Black. 3 colors/ 2 changes total. Banksy Collection: https://www.printables.com/social/336804-triple-g-workshop/collections/359901 Link to all multicolor art:…
Print approx. €1.71–€2.09 excl. taxPreliminary estimate for one variant
We got a free aerator in the mail. Pretty decent and lets you pulse the thing with a springy button switch on the top. Anyways, it didn't come with a stand and laying it down on it's side was a big NO-GO. Spent an hour in Fusion 360 to…
Print approx. €1.99–€2.43 excl. taxPreliminary estimate for one variant
made this because who doesn't like the punisher. Weight is estimated not actual weight
Print approx. €1.52–€1.86 excl. taxPreliminary estimate for one variant
Tool used to open access panels / hatches in ceilings or lofts. Tool is three sided and includes: 1 x square 6.5x6.5mm tool 1 x square 8.5x8.5mm tool 1 x flat-head screwdriver type tool
Print approx. €0.73–€0.89 excl. taxPreliminary estimate for PETGSource material: PET
I wanted a raspberry pi 5 case that would also house my waveshare usb pcie hat. It comes with everything you need in order to mount it in the case including the standoffs, and hex nuts. You will also need to purchase a raspberry pi 5…
Print approx. €4.78–€5.85 excl. taxPreliminary estimate for PETGSource material: PET
This is a cool shadow lamp I designed in the shape of a witch's hat. You can produce better shadows when the lamp is closer to the wall. I would recommend using a tealight to put underneath the witch's hat, but you can use any LED light…
Print approx. €7.38–€9.02 excl. taxPreliminary estimate for one variant
My simplified version of Shin Hati's lightsaber scaled for a 25 mm (1") blade. The model has an internal compartment for my electronics carrier (https://www.printables.com/model/797013-lightsaber-electronics-carrier) and uses the Adafruit…
Print approx. €12.21–€14.92 excl. taxPreliminary estimate for PETGSource material: PET
I turn my printer off, when not in use, but I don't think you have to unplug the power supply. My power supply is plugged in behind my desk, so I'd rather not have to remove it every time i turn the printer off - but the blue light is…
Print approx. €1.08–€1.32 excl. taxPreliminary estimate for PETGSource material: PET
Material: Filament PM PLA Pearl Green Layerheight : 0.1mm Support: Not necessary
Print approx. €0.98–€1.20 excl. taxPreliminary estimate for one variant
Hi, I remixed the stand done by tritschi because after installing the excellent led light bar for prusa mk4 , it was impossible to put the case where it originally stand. Also I wanted it to be near the logitech c310 camera stand by…
Print approx. €2.85–€3.48 excl. taxPreliminary estimate for one variant
Made specifically for Polk Audio DB 842 DVC, which has a 96.5 mm top mounting depth and a 196 mm diameter octagon screw pattern. The Polk sub is a great step up from the factory subwoofer without amp upgrade (my Civic comes with a 540W…
Print approx. €3.28–€4.01 excl. taxPreliminary estimate for PETGSource material: PET
The Pixy's maker, Snapchat, may have quickly abandoned the drone market but that doesn't mean we have to abandon our little drone buddies! The Pixy's surprisingly well built but for long trips or throwing into a bag full of other gear its…
Print approx. €0.05–€0.07 excl. taxPreliminary estimate for PETGSource material: PET
In the Netherlands we have this saying: “You can't always roll a six". For when stuff isn't going as you wished. In dutch: “je kunt niet altijd zes gooien” So to prove that wrong I made this silly cube that has six indents on every…
Print approx. €0.52–€0.63 excl. taxPreliminary estimate for one variant
This a quick and easy to use card holder that doubles as a vase. Just print in you normal vase mode settings.
Print approx. €1.24–€1.52 excl. taxPreliminary estimate for one variant
print 2 and interlock them, then insert into the holes in the spool. may work with creality spools as well. Other brands
Print approx. €1.64–€2.00 excl. taxPreliminary estimate for one variant
Model is a 25mm coin with Recycle triangle <1> and PETG on both sides. Each coin consumes 40 cm of 1.75mm filament using a 0.4mm nozzle sliced as Prusament PETG. This print is useful for consuming the end of a roll that is too little to…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for PETGSource material: PET
Wall hook for multi purpose use. It's a simple hook goes on the wall. I used wood filament to get the wooden look. V2 can be found here ( https://www.prusaprinters.org/prints/53652-coats-jackets-hats-wall-hook-v2 ) Print instructions I…
Print approx. €1.67–€2.04 excl. taxPreliminary estimate for one variant
galaxy whatch charger support , fio saindo tanto do lado direito quanto esquerdo Pode ser usado de pé ou deitado
Print approx. €74.28–€90.79 excl. taxPreliminary estimate for one variant
Requires: Four 3.5 mm x 30 mm screws A board or tablet of sufficient size (see below) Four pieces of 10 mm x 10 mm aluminium extrusion of equal length, roughly 10 cm are good. Your tablet needs at least a flat surface that is 370mm wide,…
Print approx. €0.47–€0.58 excl. taxPreliminary estimate for one variant
I found the V1 ( https://www.prusaprinters.org/prints/53542-coats-jackets-hats-wall-hook ) a little complicated and not that strong. This it a better option.
Print approx. €2.11–€2.58 excl. taxPreliminary estimate for one variant
This is a two-part key ring with a Ø8x2mm circular magnet mounted on the inside. You can apply it on any available metal part, if you wish, you can also use double-sided adhesive tape. You can use it as key ring, mask holder, remote…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
Office Decoration
Print approx. €7.00–€8.56 excl. taxPreliminary estimate for one variant
a back to the Heltec V3 case with no battery space. 2 holes for screw mounting to a surface or flat face for VHB tape.
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for PETGSource material: PET
Simple replacement part for the blade guards on the Snapchat Pixy drone . Printing Suggestions My tests and final prints were done with a stock Prusa MINI+ in Prusament PETG with the stock 0.4mm nozzle. Better results came from lowering…
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for PETGSource material: PET
We wanted a spooky, scary pumpkin earring set to show off our glow in the dark filament. These earrings utilize a filament change to create a multi-color print and a glowing effect. We used actual glow-in-the-dark filament on our favorite…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
This Hatak fidget spinner is made up of a spinning body section with a top and bottom pyramid section that connects via two small pins. The spinner body prints in one piece but will need some supports from the build plate for the rising…
Print approx. €0.95–€1.17 excl. taxPreliminary estimate for one variant
A very simple print of the “hat” aperiodic monotile recently published by: David Smith, Joseph Samuel Myers, Craig S. Kaplan and Chaim Goodman-Strauss. The model is approx 30x30mm and 2mm thick. The gcode contains 16 instances in case you…
Print approx. €0.88–€1.07 excl. taxPreliminary estimate for one variant
Adapter to mount Geekworm X1001 NVME SSD hat to the passively cooled Edatech ED-Pi5Case-B for the Raspberry Pi 5. The included standoffs with the X1001 won't fit, so this is an adapter. Print in PETG or another heat resistant material,…
Print approx. €0.74–€0.91 excl. taxPreliminary estimate for PETGSource material: PET
Druckbare Ersatzhalterung für die Montage des BuddyChat - Moduls am Helm. Das Original bricht leicht ab, das die Schraube ein wenig zu lang ist und die Schraubenaufnahme nicht massiv, sondern hohl. Eine Aufnahme für den Gummiring ist…
Print approx. €0.95–€1.17 excl. taxPreliminary estimate for PETGSource material: PET
Squeeze to open jaw and it will automatically close when let go. Use it for binders, chip bags, or anything that needs organization.
Print approx. €1.37–€1.67 excl. taxPreliminary estimate for one variant
A spare part for the pump or what it was for, again I have no idea
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for PETGSource material: PET
100x160mm sign,warning against unproductive emotion. Mesh and Solid models provided. The solid version might be an easier print. Best with color switch above 1mm, as with included gcode for the mesh version. Also see the Shadowbox Frames…
Print approx. €1.76–€2.15 excl. taxPreliminary estimate for one variant
This is a Piston Cup trophy I printed in silk gold PLA that is really knuckle dusters. USE FOR LEGAL USE ONLY.
Print approx. €0.57–€0.69 excl. taxPreliminary estimate for one variant
100x160mm sign, advertising the ACME Helicopter Hat, yet another impossibly unwise ACME product. Mesh and Solid models provided. The solid version might be an easier print. Best with color switch above 1mm, as with included gcode for the…
Print approx. €1.62–€1.98 excl. taxPreliminary estimate for one variant
A passtrough fidget made from honey comb infill. DO NOT USE THE STL File else it would print it normally use the gcode
Print approx. €2.48–€3.03 excl. taxPreliminary estimate for one variant
100x160mm sign, with instructions from the Mgt. Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames , which fit all of my signs . If you enjoy these,…
Print approx. €1.68–€2.05 excl. taxPreliminary estimate for one variant
…Please be sure to hit like & post a make, I'd love to see your prints! EDIT: Finally! STEP file has been added!! Sorry it took so long guys, enjoy!! Add some class to your Voron with this awesome canopy / top hat! If you have a smaller…
Update(8/6/23) : Added a low-interference version for anyone having problems with collisions with their toolhead cover. This one is harder to print, but it should solve the issue for people where they get rubbing with the support arm.…
UPDATE!!!🎃🎃🎃 You can now download a new version of witch hat: MadEye Hat! Downlaod from HERE Pumpkin Venom - No AMS is LIVE NOW! Patreon.com/DraftAxis for EXCLUSIVE content and COMMERCIAL license ✨ Meet the Grumpy Witch Hat! 🧙♀🎩 This…
PRESUPPORTED - https://social.thangs.com/m/57128 Hatsune Miku (初音ミク), codenamed CV01, was the first Japanese VOCALOID to be both developed and distributed by Crypton Future Media, Inc.. She was initially released in August 2007 for the…
Wanted to make a top hat for another model. Prints easy, and the brim can be curved using a heat gun if desired, which gives a higher quality finish than printing a curved brim. Post-Printing After sanding, bending with the heat gun, and…
Maj 30/06/24 : https://www.printables.com/model/927111-anti-pluie-piege-anti-frelon addition test piece anti rain hat suspension Part to test because no more printer working at the moment... fixing with petg wire as attachement Thanks in…
3D Miniature of Midtown Manhattan! Collection of all my miniatures: https://www.printables.com/@jarvizar/collections/1124416 I have many other exclusive miniatures available for free on MakerWorld ! Lower Manhattan miniature:…
Sorting Hat from the Harry Potter movies to use as a finger toy
A quick print to add some festivity to small objects. Requires only a single filament change. There are two versions of the model, one with a built-in brim on the ball for easy printing and one that has no additional supports in case you…
i made this model for dummy 13, fits nicely on the head with no mods print with supports, 0.10 layer height
Various hats for your Dummy 13! Although they look better with a .2mm nozzle, most of these can be printed with a 0.4mm nozzle, with the only exception of the Nike and possibly the Mercedes one. For best results, use a layer height of .15…
A simple tool to bend your hat brim to hold a curve while steaming it!
First of all, thank you for clicking on and maybe printing my model :D Pi 5 case, following the design of my Pi 4 case . The top and mid-frame remain unchanged. For FDM printing i recommend PLA or some other stiff fillament. !!! Official…
The doors are assembled by using filament as hinge rod. Insert it from bottom and up. The fridge is sized to fit with Sylvanian families the material should be thick enough to be re-seized to also fit Playmobil. Just contact me if that…
The texture of the hat is designed to look like real straw. The hat is available in version A (2 filament changes) and version B (16 filament changes). In version A the red band is both internal and external, in version B the red band is…
Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my…
Clever solution to hold up to 5 caps/hats. Easy print. No supports needed.
🎃🧙 Pumpkin Witch Hat – A Spooky-Cute Halloween Must-Have! 🧙🎃 Looking for the perfect Halloween print to bring a little wicked charm to your home or desk? Look no further! The Pumpkin Witch Hat is a delightfully creepy yet stylish model…
SNAPTOR, durable strength! Printed in one piece and activated with a single snap, the SNAPTOR is a compact clamp that’s always ready to bite. Its integrated preloaded spring mechanism is activated after printing. No screws, no assembly,…
