Search results: hesi

Sort order

712 models

P
PrintablesR3D

Combined First Layer + Adhesion Test

The Ultimate First Layer and Adhesion Calibration I designed this model to test several calibration and adhesion aspects like for example: Nozzle Offset Adhesion Roundness Small-feature performance Also it gives you an indication for…

Downloads
5,123
Likes
119
Rating
5
P
PrintablesFKBS

Bed adhesion test and residue remover print

rectangle 1 layer thick to test your bed adhesion and clear off residue from print bed infill-100% Supports-no Rafts-no

Downloads
1,027
Likes
33
Rating
5
P
PrintablesCelta

Cabinet Door Pan Lid Holder (Adhesive Mount)

Maximize your cabinet space and keep pan lids organized with these convenient holders. Designed for easy installation on cabinet doors using double-sided adhesive tape, these holders eliminate the need for drilling, preserving your…

Downloads
925
Likes
449
Rating
4.88
P
PrintablesOurAngryBadger

Ultimate Bed Adhesion Test Deluxe

The higher you print it, the heavier it gets! Test your bed adhesion with this. Play with your fan speeds, your heat settings... see what works! The higher it prints, the more it pulls on the bed. Measuring gauge on side in 25mm steps.…

Downloads
836
Likes
19
Rating
5
P
PrintablesReferentiel

E-Nable - Phoenix Unlimbited Hand Prothesis

Join the E-Nable association and offer a 3D printed hand to children! Rejoignez l'association E-Nable et offrez une main imprimée 3D aux enfants! https://e-nable.fr/…

Downloads
660
Likes
141
Rating
5
P
PrintablesJoão Severino

Prusa Core One Rubber Feet Holder (No Adhesive)

Prusa Core One Rubber Foot Holder – Adhesive‑Free Upgrade The adhesive on the Prusa Core One’s rubber feet has always been an annoyance for me, and with some inspiration from Prusa Core One Feet v2 - Prusa rubber feet reuse by Ondrashek ,…

Downloads
349
Likes
113
Rating
5
P
PrintablesART TOO

BED ADHESION TEST - BED ADHESIVE TESTER - (How far can you get ??)

Let me know how many levels your printer reached !!

Downloads
304
Likes
53
Rating
5
P
Printablesvpicone

Starbond CA Adhesive Applicator Lid

It's not pretty, but hopefully it can help someone else out in a pinch. I've also included the Fusion360 file. Instructions : 0.2mm PLA Add some support underneath the lid. See starbond-ca-nozzle.3mf , it might be overkill but gets the…

Downloads
281
Likes
24
Rating
5
P
PrintablesKlipGans

Parametric Adhesive hook (tesa nail / command strips)

Adhesive nails compatible with tesa refill strips in various sizes. I print mine in 0.1mm layer height to get a nicer definition on the plate and hook. The model is parametric for use in openSCAD with clear parameters for changing various…

Downloads
232
Likes
22
Rating
5
P
PrintablesObe_Design

Brick Line / Cord Holder - No Screws or Adhesives

A simple and practical brick line holder that stays in place using the tension of the brick line itself — no screws, nails, or adhesives required.Perfect for masons, DIYers, or anyone needing to stretch a straight line when working with…

Downloads
224
Likes
34
Rating
0
P
Printableshorrovac

Adhesive tape helper (50mm)

Print in the orientation from the .stl file. It is not a trivial task to get sharp points out of a 3D printer, so if yours come out a bit blunt you could use a nail file (or similar) to sharpen the teeth. Usage: stick it on your roll of…

Downloads
224
Likes
32
Rating
4.67
P
Printables3D-Lab

Glasses Holder || Wall Mount & Adhesive mount || (with a keychain Mount)

Slicer settings: • Printed in PETG • Nozzle size: 0.4 layer thickness • Layer Height: 0.2 (mm) • Supports must be activated, right in the dropdown menu (everywhere) • Supports are required for the small hooks of the glasses holder • Size:…

Downloads
205
Likes
45
Rating
5
P
PrintablesPreischl 3D

Cable Wall Clip self-adhesive

Self-Adhesive Cable Wall Clip Hey maker! 👋 Keep your cables tidy without buying huge packs from the DIY store. Features: Simple, fast-to-print design using minimal material. Easy to remove cables when needed. Can be scaled for different…

Downloads
199
Likes
41
Rating
5
P
PrintablesOeschMe

First layer adhesion test

Had some problems with some filaments not sticking to bed, so I made few benchmark shapes and sliced them in 5*C intervals between 180-230*C Some times the temperatures given in box are not the best ones ;) Files are sliced for Prusa…

Downloads
177
Likes
12
Rating
5
P
PrintablesCartoonishNerd

Adhesive Tape Dispenser Spindle

The spindle of my adhesive tape dispenser was lost. Hence, this project was made. As the shaft of the spindle caused difficulties in printing, in terms of needing a lot of supports. Hence, the spindle was broken down into two parts, the…

Downloads
108
Likes
7
Rating
0
P
Printableszzzy

Bridging mini-test (also tests cooling, adhesion)

Test your bridging/cooling settings! Check if your bed adhesion is good enough for small footprint parts. Prints in minutes and uses less than 1 gram of filament. Category: 3D Printing Tests

Downloads
102
Likes
4
Rating
0
P
Printableshorrovac

Adhesive tape helper

Print with enough detail to give you sharp(ish) teeth on the model. You can also make them pointier using a crafts knife. Tearing off takes some practice, but works. The model is designed to be slightly loose on the standard tape width…

Downloads
90
Likes
16
Rating
0
P
PrintablesDP design

[Adhesion Fix Remix] Cam lock bag clip

FINALLY! I can print more than 2 or 3 of these clips without an adhesion fail. I print these bag clips when I want to finish rolls of filament, then I give them away to friends, family, or anyone who shows interest in my 3D printers.…

Downloads
82
Likes
12
Rating
0
P
PrintablesMukluk Actual

Gridfinity Holder for Magigoo 3D Printing Adhesive

Printed in PLA, didn't use supports.

Downloads
57
Likes
6
Rating
5
P
Printablestom

Haken, Klebehaken/ Hook, adhesive hook

Dieser Haken wird mit Powerstrips befestigt. Die Lasche des Powerstrips steht über, sodass der Haken bei Bedarf wieder gelöst werden kann. Der Haken wird an der "Grundplatte.stl" befestigt und verdeckt die Lasche. "Haken#1.stl" und…

Downloads
48
Likes
5
Rating
0
P
PrintablesWegBier

Skadis holder for Liqui Moly 50g adhesive bottles

A simple holder for 50g Liqui Moly screw lock (adhesives) bottles to have them handy and organized on the IKEA Skadis board. It uses two of the universal hooks ( Skadis_Universal_Hook.stl ) from CSD_Salzburg over at Thingiverse. I have…

Downloads
45
Likes
9
Rating
5
P
PrintablesLukasZat

Perfektní držák na izolepu- Best adhesive tape holder!!

printed with only a few supports (you have to draw them yourself where they should be, see the picture from PrusaSlicer, and they come off super nicely if you use the support settings like I did), fully functional, perfect design, for…

Downloads
43
Likes
11
Rating
4.5
P
Printablestimn

Spare steel sheet holder wall mount for adhesive strips

Description This is a remix of G.wrks Spare steel sheet holder wall mount (thanks a lot!). It removes the screw holes for mounting with adhesive strips. It also adds wedges at the back that make the strip ends accessible after mounting. I…

Downloads
38
Likes
13
Rating
5
P
PrintablesEthan Shelton

Print in Place Glasses Bed Adhesion Test V1

This test print evaluates your 3D printer's bed adhesion. If the hinge falls out of the glasses when you remove them from the build plate, your printer has failed the test. To address this, either clean your build plate thoroughly or…

Downloads
33
Likes
8
Rating
5
P
Printablesmaxmar

Dust collector for vacuum cleaner with self adhesion

Tired of dealing with scattered dust and cleaning up after drilling some holes at home? Have a look at my dust collector/catcher designed for self-adhesion and effective dust capture. It works with most vacuum cleaners, making your…

Downloads
19
Likes
4
Rating
5
P
PrintablesKen

filament guide for sceoan windstorm s1 and any generic printer (needs some form of adhesion recommend double sided tape)

if you have any other questions feel free to message me through printables I used the orca slicing software with the marlin generic gcode If you likethe file consider following my page I will be designing more accessories for the printer…

Downloads
9
Likes
0
Rating
0
P
PrintablesMrBramme

Rusta self-adhesive hook magnet mount

A simple mount to be able to magnet mount the self-adhesive hooks from Rusta. You pick howmany magnets you use, up to 9! I used 5 and stuck the hook on it. works like a charm. magnet diameter is 10,1mm and 2,1mm deep.

Downloads
5
Likes
0
Rating
0
P
PrintablesMcLovin

Cabinet Door Spray Bottle Holder (no holes/adhesive)

Print Settings: No supports needed (as long as your printer can handle bridges fine.) Layer height : 0.32mm (you could go lower, but thicker layers will make it stronger) Walls : minimum 3-5 Infill : doesn't matter; anything >10% should…

Downloads
4,963
Likes
3,121
Rating
4.87
P
PrintablesGuilhem

Mechanical Finger Prosthesis

Prosthesis finger, to be printed with strong material. Will not be functional when printed in FDM PLA. Functionnal proof of concept, dimentions to be adapted to fit the need.

Downloads
3,901
Likes
482
Rating
4.75
P
PrintablesVC Design

Cable Clips Collection - Self Adhesive - 4 Variations ( Parametric )

Electric Cable Diameter 2mm -> 6mm, mounted using double sided tape The STL files are scalable

Downloads
3,532
Likes
940
Rating
4.93
P
PrintablesBalulo3Dmaker

Adhesive Trash Bag Holder – Wall-Mounted Organizer, No Drilling, Space-Saving & Durable

Keep your space clean, organized, and efficient with this adhesive trash bag holder set. Designed for convenience, these wall-mounted holders let you store and dispense trash bags effortlessly—no tools or drilling required.

Downloads
2,985
Likes
1,352
Rating
4.93
P
PrintablesCamelXP

Silicon / construction adhesive nozzle cleaner

Description: Recently, I’ve been working a lot with construction adhesive, and every time there was a problem with glue drying inside the nozzle. To solve this, I came up with the idea of making a simple tool that helps clean the nozzle…

Downloads
2,634
Likes
686
Rating
4.88
P
PrintablesJason Foss

Bed Adhesion Warp Test

This is a quick test I designed to test bed adhesion. There are some crazy tests out there that'll determine holding power and such, but I just wanted something that would replicate the sorts of issues you might run across in everyday…

Downloads
2,607
Likes
94
Rating
4.63
P
Printablesdaclasen

Bambu Lab X1C Plate and Adhesive Station

This is a Remix of kjbturok s Bambu Lab X1C Plate and Gluestick Holder to fit both the big 3DLAC Spray Can and the smaller Spray Bottle. Additionally it can hold the Bambu Lab Glue Stick, another Spray Bottle with ~33mm diameter (I have…

Downloads
2,233
Likes
458
Rating
4.94
P
PrintablesExtrutim

Bed Adhesion / Warping Test

A simple test to check the bed adhesion and shrinkage of your filaments. I designed the model so that it should definitely lift from the bed. I wanted to test how much different materials shrink and how the enclosure affects them at…

Downloads
1,639
Likes
146
Rating
4.95
P
Printablessamudge

Super Glue/CA Adhesive Bottle Nozzle & Cap [Stick Fast/Rockler Brand]

This is a replacement nozzle and replacement nozzle cap for Super Glue/CA Adhesive bottles. It's possible multiple brands use this type, but this one was specifically modeled after the Rockler/Stick Fast brand, for the 4.5 Oz bottles. In…

Downloads
1,336
Likes
136
Rating
4.83

Adhesion Raft

Super quick and simple print I recommend doing after you first setup a new resin printer. Simply duplicate the raft out to line the build plate like you see in the image, and print it off. I recommend keeping the slice file on your USB so…

Downloads
1,331
Likes
12
Rating
0
P
PrintablesRandomHacks

Adhesive bandage - Band-aid portable container

This is a portable container for adhesive bandages with a snapping lid. The inside dimensions are 17×32×90 mm. It’s compact and easy to carry, making it great for outdoor activities, hiking, camping, travel, or keeping in your car (don't…

Downloads
1,319
Likes
597
Rating
5
P
PrintablesMaximilium XYZ

BioMech Finger Prosthesis (Index Left Hand)

BioMech Finger Prosthesis In 2011 I lost my left hand index finger in a work related accident... Bio Mechanical prosthesis are available... but very expensive…. So I decided to learn how to 3D print, I watch learning videos on YouTube on…

Downloads
1,215
Likes
133
Rating
5
P

Ender 3 Bed Leveling and Adhesion Test

This tests the adhesion in a few more spots, to better fine tune the bed levelness

Downloads
1,138
Likes
35
Rating
5
P
PrintablesMaximilium XYZ

BioMech Finger Prosthesis (Index Right Hand)

In 2011 I lost my left hand index finger in a work related accident... Bio Mechanical prosthesis are available... but very expensive…. So I decided to learn how to 3D print, I watch learning videos on YouTube on how work with AutoCAD…

Downloads
1,080
Likes
163
Rating
3
P
PrintablesBarcode Labs

Cold Shoe Mount - 3M Adhesive Backed

This is an adhesive backed cold shoe mount. Can be used to place camera and microphone gear that utilize cold shoes anywhere you can get 3M VHB tape to stick. I specifically made this to mount a Deity V-Mic to my primary workstation for…

Downloads
1,048
Likes
44
Rating
5
P
PrintablesSteveJohnsen

Glue / Adhesive Spreader - 4" & 6" Wide - 1/8", 3/16" & 1/4" Teeth

This is a wood glue or adhesive spreader or trowel, in 4" and 6" blade widths, with three teeth width options for each blade - .125" (1/8"), .188" (3/16") and .25" (1/4"). The design is lightweight, but easy to hold. It uses ~ 8-10 grams…

Downloads
1,008
Likes
216
Rating
5
P
Printables3D Print Life

Finger Prosthesis

Finger Prosthesis by droidlex

Downloads
1,007
Likes
192
Rating
0
P
PrintablesDaniel Useriu

HangWateva (adhesive hook)

Print your slick adhesive hook in any colour. Please read the instructions for detailed information about the printing. Print instructions The instructions can be found in the pictures.

Downloads
960
Likes
211
Rating
4.86
P
PrintablesAaron K

COVID19 Headband x4 stack with improved adhesion and support

CHANGELOG: 4/2/2020: Updated the model to have more support between bands. This makes it a little harder to pull apart, but ensures that the bands adhere well to each other, as I found that some layers would not adhere and cause stringing…

Downloads
801
Likes
0
Rating
5
P
Printableslovelytuna

composite resin adhesive syringe holder

You can print each of these three components separately and then glue them together for use.

Downloads
787
Likes
84
Rating
5
P
PrintablesOGPattison

Bed Leveling Adhesion Test

Simple but effective bed adhesion test for your 3D printer to verify if your bed leveling is correct. The model is shaped to be only one layer tall so you can peel it just right off and not waste material. The xy dimensions are calibrated…

Downloads
733
Likes
11
Rating
5

Qualitative Layer Adhesion Test

This is a qualitative layer adhesion test. If your trying to get the best layer adhesion in your prints, you can use this model to look at the failure mode of your layers. Ideally, you are looking for a cohesive failure where the part…

Downloads
730
Likes
48
Rating
5
P
PrintablesmicroArc

Lucky 13 Hands Compilation (with extra adhesion)

I have scoured printables for the different lucky 13 hand gestures that have been made so far. this is primarily a repost to put all of them in one place. I'll continue to update this list as new ones come out. Each file is a pair of…

Downloads
661
Likes
92
Rating
0
P
PrintablesJMAW

Ikea Skadis 50mm Adhesive Tape Roll Holder

I tried hardly a convenient way to store/display my tape rolls on my Skadis boards. I downloaded all what I found online, but that solutions had many issues. Some was difficult to plug into the Skadis pegboard, some was too weak to hold…

Downloads
650
Likes
136
Rating
4.88
P
Printablesmikeneron

Bed Adhesion Test

Pretty simple cylinder. Good test to see how well your prints stick to the bed. Use the 40mm tall one to test various temperature settings and/or other settings until you find the one that sticks nice and firm to the bed after the print…

Downloads
634
Likes
17
Rating
5
P
PrintablesMaximilium XYZ

Left Finger BioMech Prosthesis V2 beta

Fusion 360 files released by request: This is an early release of version 2: Changes: Added 3D print support to the design. Some changes / forms created / added for future design changes. Left index – to convert to right hand use mirror…

Downloads
603
Likes
88
Rating
0
P
PrintablesCriticalprint3d

Torture Spider, 3D-printer torture test - overhangs - cooling - retraction - bed adhesion

A 3D-printer torture test. Highlights cooling, overhangs, stringing, bed adhesion and more. Please note that this is not an easy print, ensure proper bed adhesion before attempting this. I wanted a model to use while finding the optimal…

Downloads
554
Likes
62
Rating
5
P
Printablesbgiovanny

Bambu Lab X1C Plate top Glass and Adhesive Station

This is a Remix of @daclasen and @TmnSn I add the holder fpr the Top Glass on the original file. And I made two new files one with out the accessory holder and one with out the Glass and building plates holder. I add some magnets 6x3 for…

Downloads
553
Likes
134
Rating
4.83
P
Printablesdrho1337

Mixing Nozzle for 2K-Epoxy Adhesive

This is a replacement mixing nozzle for the 2K epoxy adhesive cartridges from UHU. With this glue I like to glue larger components or generally components which must be firmly bonded together. Unfortunately, only two mixing nozzles are…

Downloads
553
Likes
69
Rating
5
P
PrintablesBoA

Cardo Packtalk adhesive mounting plate replacement

Cardo Packtalk adhesive mounting plate replacement

Downloads
535
Likes
29
Rating
0
P
PrintablesLabrat

Adhesive kitchen hooks

Simple adhesive hooks for utensils to be glued (or acrylic-taped) onto the underside of a kitchen cupboard.

Downloads
516
Likes
83
Rating
5

Bed adhesion test

Test your bed adhesion with this fast and simple test. Print with spiralize/vase mode. LH 0.2 30mm/s (or slower depending on your cooling capacity) ~25min print. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports:…

Downloads
485
Likes
20
Rating
4.86
P
Printablesdd586

Knee Prosthesis

This is a development and modification of a real knee prosthesis.

Downloads
471
Likes
19
Rating
5
P
PrintablesAdam Heinrich

Parametric synthesizer stand

This is a simple parametric synthesizer stand. It was originally designed for the Vector synthesizer but can be used for any other gear after changing the parameters. The stand consists of two identical parts. When printed wide enough…

Downloads
467
Likes
70
Rating
5
P
PrintablesTheSimNet

Universal Flight Sim Trigger Module by @TheSimNet

Introducing the Universal Flight Sim Trigger Module by @TheSimNet! Featuring: Dual or Single Stage operation Authentic operation Consistent return force Satisfying break action click Parts required: Mini Micro Limit Switch 5A 125 250V AC…

Downloads
439
Likes
48
Rating
5
P
PrintablesPurchenZuPoden

SIMPLE CABLE CLIP | C TYPE | SCREW OR SELF-ADHESIVE MOUNT | ø6mm

This is a simple Cable Clip. You can use it with M3 screws or similar but you can also mount it with self-adhesive tape. The inner diameter is about 6mm. 01-12-2020: CLIP WITH LARGER DIAMETER ADDED Category: Electronics

Downloads
401
Likes
48
Rating
4.83
P
PrintablesSimon Tillema

e-Nable Hand Prosthesis

As part of our school main project I printed this e-Nable Hand Prosthesis. The model is reverse engineered from Thingiverse in SolidWorks 2019/2020 SE. Print instructions https://www.thingiverse.com/thing:1453190 If you want the…

Downloads
394
Likes
86
Rating
5
P
Printableskaeptnkrunch

PETG Layer Adhesive Test V3

Testmodel to test the layer adhesion of PETG. PETG tends to lose layer adhesion or become brittle when the humidity is to high. Model details: 25x25x25 (mm) 1mm Wall thickness 0.95m Filament 2.85g Filament

Downloads
383
Likes
13
Rating
0
P
PrintablesMechanism

Mechanism Universal Grip (Adhesive Based)

The world’s most versatile mounting solution for portable gaming Check out more files for download under my profile here: https://www.printables.com/@get_mechanism Want a stronger/more official solution? We also offer injection molded…

Downloads
352
Likes
29
Rating
5
P
Printablesvidision

Adhesive Wall Hooks (IKEA Tjusig Styled)

I printed with slim tree supports.

Downloads
348
Likes
24
Rating
5
P
PrintablesVaty79

Adhesive tape holder

Adhesive tape holder, use 2x screws, infill size tape 75mm

Downloads
344
Likes
167
Rating
5
P
PrintablesDaniele

Hair Straightener Holder, biadhesive remix

I just filled the screw holes since I planned to stick it with biadhesive

Downloads
342
Likes
26
Rating
5
P
PrintablesLinkDesigns

Bed Adhesion/First Layer Test

This model is designed for printing with a .4mm nozzle and .2mm layer height. It's a great way to diagnose and calibrate things like nozzle offset and fine details as well as overhangs and retractions. I printed my test on a direct drive…

Downloads
341
Likes
28
Rating
5
P
PrintablesRustomac

Cable Raceway (Wire management) - Use with adhesive

Print recommendations: Print laying flat (not vertically standing up), as shown in the first picture. No supports Use double-sided tape, my favorite is 3M VHB.

Downloads
334
Likes
43
Rating
5
P
PrintablesGatto

GV Adhesive Cord Wrapper

I recommend using a good double-sided tape to fix it firmly. Easy WAF Points ;-)

Downloads
330
Likes
82
Rating
5
P
PrintablesRobertusMaximus

Synthesizer Stand 45 degree angle

This is an easy-to-print Synthesizer Stand angled at 45 degrees. I am using it for several synthesizers at 100 percent and 85 percent. I print up the first batch of four and am now printing another four. Will support Synths or mixers up…

Downloads
308
Likes
25
Rating
5
P
PrintablesAndrea

Calibration Retraction Adhesion First Layer test

Calibration Test Circular – Retraction & First Layer Check 🎯🖨 Not sure if your 3D printer is calibrated correctly? This Calibration Test Circular is here to help! 💡 Test your printer's retraction settings and first-layer accuracy with…

Downloads
302
Likes
40
Rating
5
P
PrintablesMike

Skadis 3DLAC Adhesive Spray Can Holder

That can is soo tall it always ends up falling when it's on my bench next to my Prusa printer. She needed his own place. - Design in Thinkercad. -Printed in PLA+ - 0.4MM

Downloads
297
Likes
41
Rating
4.9
P
PrintablesK0906F

test print (1st layer - adhesion - z-offset) - Testdruck (1. Schicht - Haftung - z-offset)

What you see is what you get. :-) Data: Build plate adhesion: Skirt Number of lines: 4 Daten: Druckbetthaftung: Skirt Anzahl der Linien: 4 Print Settings Rafts: No Supports: Doesn't Matter Resolution: 0,2 Infill: - Filament: all Category:…

Downloads
295
Likes
3
Rating
4
P
PrintablesPyroduck

E 6000 Glue Adhesive Tip

Here are a couple of tips for an E6000, 3.7 oz tube of adhesive. Fine has a 1.5mm tip, Small is 1.8mm, Medium is 2.0mm and Wide is about 4.3mm. No supports, raft, or brims 2.0mm PLA 15% infill Rotate the part 90 degrees, then use the…

Downloads
294
Likes
111
Rating
4.5
P
Printablesscottbez1

Guition 4" ESP32-S3 LVGL with Command Adhesive strip holes

A minor remix of Kh's Guition 4" 480x480 mounting bracket with holes for accessing Command adhesive strips from inside

Downloads
289
Likes
27
Rating
4
P
PrintablesFipsthedog

Phone Mount Ball Joint to goPro adhesive mounts - 17mm Ball joint

Short, new Version: https://www.printables.com/model/470834-phone-dashboard-mount-v2 17mm seems to be the default for many chargers using ball joints. I recommend printing in a Material with a higher melting temperature to prevent…

Downloads
282
Likes
49
Rating
5
P
Printablesvidision

Bike Helmet GoPro Mount - Adhesive Tape

Designed with slight curve to be taped or glued into place on a bike helmet.

Downloads
275
Likes
39
Rating
5
P
Printableskmoork

Double Synthesizer Bracket

Made for a friend who had two Behringer synthesizers he wanted stacked on top of each other. Uncertain if the hole pattern works for other models but taken from the Behringer Model D. Made to replace the side cover and use the original…

Downloads
274
Likes
25
Rating
0
P
PrintablesMechanism

Mechanism/Deckmate Adhesive Puck

The world’s most versatile mounting solution for portable gaming Check out more files for download under my profile here: https://www.printables.com/@get_mechanism Want a stronger/more official solution? We also offer injection molded…

Downloads
265
Likes
18
Rating
0
P
PrintablesPlebikson

V-NOTCH ADHESIVE CARTRIDGE NOZZLE

Precision 3D Printed Nozzle for 310 ml Adhesive Cartridges Product description This versatile 3D printed applicator nozzle is designed for controlled dispensing of thick construction adhesives and sealants from standard 310 ml cartridges.…

Downloads
263
Likes
125
Rating
4.5
P
PrintablesGeckoSplinter

Hook for Bike Helmet / Bag (adhesive

Simple hook to store your bike helmets on the back of a door for example. There is already plenty of design with screw but that's sometime not possible to do so. 2 version available: Big hook for bike helmet Small version of the hook for…

Downloads
262
Likes
41
Rating
4.5
P
PrintablesPurchenZuPoden

REMIXED HEADPHONES HANGER - UNDER-DESK, ADHESIVE TAPE MOUNT

Modified the mounting bracket to fit 40mm wide VHB tape. Thanks to Calini for the original design!

Downloads
257
Likes
34
Rating
4.25
P
PrintablesBartosz Jarosz

alternative knobs/sliders for synthesizer arturia microbrute se

I needed replacement for original knobs/sliders because they are sticky from uv light so after couple years they useless. designed in fusion360. sliders are tight fit! Sequener pattern knob is difrent so i designed also this variant.

Downloads
257
Likes
16
Rating
5
P
Printablesmedyk3D

Bed Adhesion Test

I've used this part to test ZillaGrip on my steel FlexPlate. More info in my video: youtu.be/IrL0kZ1LjYo It's a copy of Toms design used in his video about Grocery Store Bed Adhesives:d youtube.com/watch?v=MAw2FK8y5i4 Print Settings:…

Downloads
256
Likes
10
Rating
0
P
PrintablesMarcus

Samsung T7 Mount (Adhesive Mounting) 💪

To attach my two Samsung T7s to the back of the iMac stand, I took @OSXtraveller's (perfectly fitting!) model as a template and filled the screw holes. This modification adjusts the base so that it provides a continuous surface. Attaching…

Downloads
246
Likes
26
Rating
0
P
PrintablesJMAW

Ikea Skadis 20mm Adhesive Tape Roll Holder

After trying hardly a convenient way to store/display my tape rolls on my Skadis boards and downloaded all what I found online, but that solutions had many issues: some was difficult to plug into the Skadis pegboard, some was too weak to…

Downloads
244
Likes
64
Rating
5
P
Printablesjonvilla

Protesis para patas de gato o perro/Prosthesis for cat or dog paws

Prótesis escalable para nuestras mascota . Es recomendable imprimirlo con materiales resistentes

Downloads
239
Likes
26
Rating
0
P
Printablesbonokaba

Mac mini M4 Front Power Button Access Arm – No Adhesive on Mac

Description / Overview This is a 3D-printable access arm that lets you press the power button of the Mac mini M4 from the front side—perfect for setups where the Mac is stored inside a desk shelf or cabinet. 💡 Key Features : Designed for…

Downloads
233
Likes
17
Rating
5
P
PrintablesAudi

Anesthesia Circuit Dryer Adapters

Adapters for two different hose sizes: 18 mm and 22 mm (plus an 18/22 mm combo). The combo adapter is shown in the photo. The .3mf file shows how I painted-on supports for the combo adapter. I also used a 3 mm brim for stability. Print…

Downloads
232
Likes
12
Rating
0
P
PrintablesL29Ah

Customizable wall hook optimized for double-sided adhesive tape and FDM v3

Can be adjusted for your adhesive tape sizes. Uses https://raw.githubusercontent.com/clothbot/ClothBotCreations/master/utilities/fillet.scad

Downloads
232
Likes
8
Rating
5
P
PrintablesKaminoKGY

Bed adhesion benchmark test print

Please give it a ❤️ if you like it 🥰 I designed this model to compare the adhesion of different 3d printer beds. Video FR about it: Please give it a ❤️ if you like it 🥰

Downloads
223
Likes
15
Rating
5
P
PrintablesMaximilium XYZ

BioMech Finger Prosthesis - Finger Tip Rubber Insert Upgrade

Objective: Create a rubber Tip insert using a 3D printed insert. Materials: 3D printed Inserts: For best quality, I got the inserts printed on a resin 3D printer (Formlabs Standard Resin (SLA), Layer height: 50μm) - 8 each. Making the…

Downloads
215
Likes
33
Rating
5
P
PrintablesLukass

Two component adhesive dispensing gun

Not simple to print to have nice gear but, its nice to work with. Printed PETG 0,15 with supports 2/3 to have nice gear on pushing mechanism Update: I broke my tooth when adhesive was too old so i change design for easy print pusher…

Downloads
215
Likes
20
Rating
0
P
PrintablesThorb

HSW self-adhesive double-sided tape fixture

I wanted to build a new “Honeycomb Storage Wall,” but I was asked to avoid drilling any holes so it could be removed without leaving any marks. To solve this, I designed a bracket based on the hollow inlays, which can be easily attached…

Downloads
214
Likes
63
Rating
5
P
Printableskarmabass

Wahl Clipper Guard Holder - Remix (Adhesive)

Simple remix that removes the four screw mounting points, for adhesive mounting. I attached it to my mirror with command strips.

Downloads
213
Likes
37
Rating
0
P
Printablesnirgal

Self adhesive wall hooks

Most of us know that self adhesive hooks available in stores are pretty expensive things. With these hooks hanging pictures and other small items on a wall can be pretty cheap. Hooks can be printed without supports. To make them do the…

Downloads
212
Likes
13
Rating
5
P
PrintablesAdam L

Tea Bag Dispenser : Version for Command Strip, Velcro, or Magnetic adhesive

I realized the parent could use some different attachment methods, this one is for command strips or velcro or adhesive mag strips. The cutouts for the default model are 0.5 mm deep x 19 mm wide, to accommodate a wide variety of possible…

Downloads
209
Likes
38
Rating
5