494 models
Object Description: It comes too late for the prusa design contest end of 2021, but here's my version of a bag clip. Advantages: - Stable hinges - Wobble-free hinge design - Easy to close - It clamps reliably even thin bags - Marble…
Print approx. €1.76–€2.15 excl. taxPreliminary estimate for one variant
Matthew's Modern Gridfinity Case design is fantastic, but I find that it takes up a lot of desk space when hinged fully open. This simple mod replaces the hinge pieces with new ones that limit the travel to approximately 100 degrees. I…
Print approx. €0.75–€0.91 excl. taxPreliminary estimate for PETGSource material: PET
Printing instructions: Magnet encapsulation in PrusaSlicer is accomplished by pausing the print before the layer that covers them : Slice the 3mf file according to your preferences. Scroll to the first layer that will cover the magnets.…
Print approx. €0.16–€0.19 excl. taxPreliminary estimate for one variant
Krabička je tisknutelná v kuse s podpěrami především na místě pantů. Rozměny jsou 110 x 80 x 12 mm. --- The box is printable in one piece with supports especially at the hinges. The dimensions are 110 x 80 x 12 mm.
Print approx. €3.18–€3.89 excl. taxPreliminary estimate for PETGSource material: PET
Why you need this: This is a beautiful print in place set of hinges that will enable your door to open completely. The geared hinge is better design choice because the two pivot points can hug the chamfered frame with a tighter profile.…
I CANNOT SAY THIS ANY SIMPLER. I'M WRITING THIS IN UPPER CASE SO THAT WHEN SOMEBODY SAYS ‘I DON’T UNDERSTAND WHAT I NEED TO PRINT' I CAN SAY IT'S ALL IN THE INFORMATION PAGE. AT A BARE MIMIMUM, EVEN IF YOU DON'T READ ANY OF THE MAIN TEXT,…
Needed a small tackle box to organize fishing gear. I really didn't need my full tackle equipment for every fishing trip. Made these two tray inserts with nesting hinges that fit perfectly in standard Altoids tin. Used 8 M2x6 screws for…
I've gotten into DMing D&D lately, and I've been inspired to make a print-in-place dicebox/dice tray/device stand. This will print in place on a standard prusa mk3. I've also included separates in case you wanted to do some different…
Hinges option for Creality K1 / K1C Unibody Riser https://www.printables.com/model/891616-creality-k1-k1c-unibody-riser Uodate 2024-10-20: Redesigned hinges for new version of the frame. Update 2023-07-14: I have updated this model.…
I really liked the original Desktop Dumpster (see original model link above), but didn't want to have to use a metal rod or print another part to use as a hinge so I just modified the holes to fit a standard piece of 1.75mm filament. Push…
This riser, combined with the guider included, gives better TPU printing, much better, and no sharp turnings, PTFE tube path, which means more reliable printing of filaments with CF. The tube will not touch the lid, and it comes from the…
Creality K1 Max 270° Door Hinges With Door Latch. My first attempt at a remix so any feedback is appreciated. For print tips, follow original.
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker You will need six M3x30mm socket head fasteners for the main…
Only the top and bottom hinges are provided, for the rest of the parts, please source from Mordiev's original model.
A variety of hinges for use with your next project. All the hinges are print in place and require small amounts of filament to print. PLA 0.16 Layer, 3 Walls, 15% Infill 3mf files stl files No Glue No Assembly
Introduction This is a 3D Printed Hinge. I designed it for use on a 3d printer enclosure. The design is quick to print and because of the threaded pieces it does require assembly but is very satisfying to put together and it is very…
I had to dismantle the doors because they were not compatible with the feet. I mixed the parts again and added additional parts. I turned the bottom hinge upside down and changed the screw holes and the problem was solved. no more…
I've been waiting for a 270° Door Hinge for the K1 Max since I first scared myself that it would shatter if swung to far. The factory design has the screws run right into the frame if opened more than 90°. Metal screws against glass with…
THERE IS NO STEP FILE BECAUSE IT WAS MADE IN TINKERCAD. EDIT: Added more sizes for different thickness of acrylic and foam gaskets. I have not tested these other sizes. I wanted a full front door without the extra visual weight of a frame…
This is a basic hinged box with magnetic closures, fully parameterized in Fusion 360. It is designed with flush hinges for excellent stackability and arrangement. It is intended to use 1.75mm filament as the hinge pin. The hinge pin path…
Please refer to the image file attached for parts reference. Included Brackets and hinges are; Split Friction Hinge (hinge 1) Heavy Duty Hinge (hinge 2) Adhesive Mount Hinge (hinge 3) Friction Hinge (hinge 4 - print in place) Corner…
A series of different sized hinges, reinforcen on places where needed. Easy, parametric, print in place, no surrports. These hinges are designed to be durable and stress resistant, print in a material that fits your needs. The hinges can…
K1/ K1c Door Hinges Remix They are still Printed in-place.
First of all: If you like this model, please klick on like to help me earn some Prusameter. Thanks. The special thing about this Fidget-Cube in comparison to similar constructions is: the cubes can be printed individually, in different…
Voron V0.1 Tophat Spacer with Hinges Makes the tophat higher, stiffer and adds a hinge. Therefore its a lot easier to open the top and adds 20mm more space in the top for cable routing and higher Extruders. I added now also a Version…
I was always frustrated with the original Lack Enclosure because the knobs were constantly falling off, and the hinges were not holding the doors well (especially, when you lift the enclosure, the doors could just fall off). I got an idea…
Adapter plates for allowing K1C and later releases of the K1 to use my 270 degree hinges. ----------------------------------------------------------------------------------------------------------------- These two (small) side panel hinge…
AUTOMATION SYSTEM With this kit you can automate some* Ironman helmets ( it may depend on the helmet design) I'm open to improvements so please help me with your feedback and leave your comment and post a photo of your make :) These…
Note: Does NOT work on the K1 Max. Design Summary: The Creality K1 is an excellent printer, but Creality's choice of door hinges is questionable. A partially opened glass door simply seems like an accident waiting to happen. I looked at…
Durable Hinges V1, designed for M4 Screws. Enjoy. Durable Hinges V2 Print settings: Layer height 0,15 Infill 15% Perimeters 3 Standard noozle 0,4mm Material PETG Supports No
This Centauri Carbon panel hinge set is an improvement over our original version. The most significant improvement is the drop-pin feature, which now enables the panel to be quickly and easily removed. Designed for a 7.5 mm spacer. Here's…
These are very simple drilling template for Blum ClipTop concealed hinges. Mark the position, align the notch, drill/mark I have uploaded the two TB distances I generally use (4.5 and 6.0mm) - see drilling diagram
This is v4 of my print-in-place DnD dice storage box. The design stores a standard set of seven dice and I've user tested the pictured green model for 2+ years filled with heavy metal dice, so even in PLA it is a robust and proven design.…
Summary This is a 3D-printable flasher pattern based on the work of Shannon Zirbel, Robert Lang, and several others. It demonstrates the ability of the flasher pattern to go from a flat state to a much more compact, folded state, all…
If You find this design useful, Please consider sharing a Make or leaving a comment. It's always good to see my efforts in use by others out there and it often inspires me to make improvements where I can. Without feedback I just draw a…
This is a hinge to attach an acrylic glass door to a wooden frame. The provided objects are for a 10mm wood panel with a 5mm acrylic glass sheet, inset by 5mm. The model contains a spacer to compensate for this 5mm inset. If you have…
The original design is good. However, I am an engineer so I designed a few improvements for the design (make it more functional, less filament, repairable, etc) and saw several people in the original and remix comments had some good ideas…
TLDR:- New Hinge design (V3) allows for quick change V3 face plates/covers while Using V2 additional V2 components for the hinge assembly. New optional tools added. Also includes post processing and detailed assembly instructions (with…
A spin on Whity's remixed rugged box, that has two latches and two hinges. This remix has one centered latch, but still has two hinges. The parameters all work the same, except HingeLatchOffset is now renamed to HingeOffset because the…
Each hinge is made up of two parts in a single STL file and will work right off the print bed. DO NOT USE SUPPORTS as they aren't needed and will likely cause the hinges to not work. The hinges are provided with and without countersunk…
This design allows a quick an easy door removal/installation for the Voron2.4. Removing the door can be helpful for maintenance work on the printer or for printing PLA. Once removed the doors can be stored on the side of the printer in…
Lid design modification.
Hallo Es sind Abdeckungen für meine Fenster. Mit Zeit werden die gelber und sehen einfach hässlich aus. Also abgebacht und nachgezeichnet. Richtige zu kaufen ist auch nicht immer so einfach. Besonders wenn man einen 3D Drucker besitzt…
The 270 degree hinges these new pins were designed for are here :- 270 Degree Geared Hinges for K1/K1 Max/K1C. Update November 1st 2024:- added some fatter link/connectors. Originals (by design) were thinner to allow the pins to be seen…
Łatwy w użyciu szablon do wiercenia pod zawiasy puszkowe 35 mm. Najlepiej zamocować go dwoma ściskami aby nie przesuwał się podczas wiercenia. Ma dodatkowo otwory do zaznaczania miejsc na wkręty zarówno pod zawias jak i prowadnik. Używam…
I have seen many print boxes with lid but not too many with hinges. So I have decided to design this small storage box and lid using hinges in Fusion 360. My original design had a 3 mm steel dowel for the hinges. This simpler revision is…
I printed the box in Prusament PLA with 0.15 layer height speed profile on MK4 MMU3 (no space for purgetower - so it's a single color print). The magnets require a bit of force to be inserted. I used a hard object to press one side into…
You will need a M3x10 screw to mount them at the 1515 extrusions, and 2x pieces of 1.75mm filament to connect part a & b.
I remixed the original version of @RIBsfit's design to correct most of issues that reported by @Mordiev. 2 M3x8mm and 2 M3x16mm screws are still needed to tight the hinges to into the frame. The backplate is not neededed but 4 M3 x H6mm x…
This little stencil helps visualzing the holes to drill for a wardrobe/cabinet door hinge. The little notches help do draw the center line and the line for the screws. printed with PLA and “0,2mm quality” profile in Prusa Slicer. No…
Any questions? Hit me up on the Voron Discord! @Alexander Þór This design is based on chrisgonzales already incredible 270 degree hinges. The main goal of this remix was to have the front panels mount in a way that didn't use any VHB tape…
Its a small box with a latch, it's designed so you use a piece of filament as a hinge. I cut a piece of filament that goes trough the length of one hinge and cut it 3mm or so longer, put it in so that the 3mm of filament stick outwards,…
Complete set of generic toilet seat hinges, including left/right hinge, nut and bolt, optimized for printing. I could only find replacements that didn't fit my old seat, or didn't fit the existing parts, so I made a complete set.…
Two different hinges I designed and printed for a project of mine. They're pretty specific to what I needed for my project but perhaps others can use them as a useful starting point. 0.5mm tolerance between parts 0.2mm layer height 0.4mm…
Finally finished printing my LACK enclosure. I opted to do a color change on corner pieces so that it would be colored to match the MK3. As I was building this new, and could use the larger acrylic panels without extensions, I modeled…
Printed in 0.16 with modifier in slicer to have fuzzy skin on the 4 “towers” that go into the rear parcel shelf 4 walls Print on the flat side to have everything at an angle No supports needed
iFixit Mako Driver Rugged Box Frame I wanted something with better hinges / latches than the iFixit Mako Driver Kit box frame so remixing it with Rugged Box (Parametric) seemed like an obvious solution. This uses the dimensions from the…
Modded original v0 hinges to allow it to open 270°
This is one of my first designs ever that I made when enclosing my very first printer back in 2016. I tried "real" metal hinges but they had too much play in them. These are self-centering and actually quite durable. The "B" version can…
I have printed them with 100% infill. So far, they have proven to be surprisingly robust.
This remix adds a bit more material around the bolts for the hinges and latches so that they are less prone to breaking when adding the M3 bolts. I used the original 4mm latch. I printed the case in PLA and the hinges in PETG. You will…
Derived from the “Charnière / Hinge” by Pa39 released under the CC BY-NC license ( https://creativecommons.org/licenses/by-nc/4.0/ ): https://www.thingiverse.com/thing:2097921 There is one difference: Imprint removed
Update November 1st 2024:- added some fatter link/connectors. Originals (by design) were thinner to allow the pins to be seen and also guarantee no sanding/post processing would be needed with an out of spec print. Newer fat links are…
Simple MicroSD card box storage with hinges (print in place). I tried printing with Ender3 S1 PRO and Prusa MK3S+, and both were great. Wait for the model to cool down then you can rotate the hinges.
This is the slimmest riser with hinges i could come up with, i like the sleek and minimalistic look to it. Video Demo i hated taking on and off the K1 lid and don’t like any of the hinges that printables has to offer, i tried for almost…
I used the box from Thomas McMaster and the latch & hinges from brass_ring . Used box is smaller one which also can be printed on the Prusa Mini. Print top, bottom, 2x hinge (print in place), latch. No supports necessary. I printed mine…
NOTE (UPDATED VERSION): When I was cleaning the Fusion's file from redundant sketches I accidentally lost a couple smaller holes that allow M3's thread to bind, so some people could have had problem with screws staying in place. I re-did…
This drill guide helps to precisely drill the holes for door hinges
Ho dovuto praticare un altro foro nella stampante per avvitare il bullone e tenere la porta
I really liked the original model but I didn't want to drill holes in my doors, so remixed them to use VHB tape. I've also used higher pin heights on the lower hinges to make putting the doors on easier. Hardware wise you just need: 4 x…
I remixed 3d_aubs glasses to use M3x4mm bolts in the hinges (just screw them in to self-tap). Also increased the size of the hinges slightly for better durability. Print with the arms top edge down, with supports, so you get a clean…
I liked very much the model by @3Dservis for a pirate doll my wife is doing. The hinges did not convince me so that is why I modelled integrated ones.
<<<text and pictures are not mine but reuploaded along with original model and licence, my own comment and pictures will be in the “make” section>>> Summary As I couldn't find a hinge that works for makedo screws that I can take apart I…
Please consider leaving a like. or just take it and slink quietly out the side door. For those not wanting to read all this text before deciding on what parts and upgrades there are, I have added an extra image to the pictures with a…
This is a mod of my own "Stiffeners for Original Prusa Enclosure doors". User @js500 asked in a comment for a remix of my stiffening elements with the (great!) "Prusa Enclosure Lift-off Door Hinge" by @Heyus_277343 . I didn't know about…
i tried to eliminate overhangs when doing this but there was just a couple that actually need it mostly under the lid. made in onshape before i learned about printed hinge solutions that are much better. i just might redesign this with…
This is a simple rolling dice box that rolls into a compact hex and locks with two 6x3mm magnets for the latch. There's no mechanical hinge, just 0.4mm of filament which will more than do the job. It's really only bending 30 degrees so…
Here's my version of an extended top cover holder for the Creality K1, with hinges and built-in LED strip holders. I've also uploaded a STEP file so you can see how everything is assembled and modify it if necessary. The focus here is on…
This is a re-upload of my low-effort hinge mod that I posted on TeamFDM.com. These models were derived from two excellent hinge mods that I very haphazardly slicer-spliced together. At the time of initially posting this, I had no CAD…
Set Unterlegscheiben für Türscharniere / Set of washers for door hinges Deutsch: Set Unterlegscheiben für Türscharniere in 1mm - 1,5mm - 2mm - 2,5mm - 3mm. Zum Einstellen der Türen in der Höhe. Innendurchmesser 11mm Aussendurchmesser 15mm…
Detent plastic hinges More part numbers and CAD formats on www.traceparts.com/goto?Product=90-18062018-053028
Many door frames are not square, or the door hinges are not mounted correctly. This causes the door to not fit evenly in its frame. Often, a door will rub on the frame near the top on the latch side, making a rubbing squeal and/or making…
These hignes are design with a slope withing so the higne can be printed in place without any problems. Ready to use from the printbed! The screw holes are M4's. More variations in shapes and sizes to come!
Supports Are Needed. You Can Resize The Model By Remix It / or on Your Slicer. Use Some Glue To Glue The [Pin] With The [Knuckle] After Assembling The Parts Together. Enjoy & Share your prints with me !
This is a simple slip in door hinge shim. This shim is designed around a standard 3-½" radiused corner door hinge. The screw holes are slotted so the shim can be slipped in and tested without fully removing the hinge screws. The shim will…
Warning, the hinge has a safety problem, I just found out there is 10mm gaps when I open the case, it hurt my finger. (updated on June 28th, 2022) file hinge v2.stl Printer is Prusa I3 Setting is 0.2mm with support material Screws is M2.5…
This part is a bit work in progress, tough it's fully functional on my K1 max. Inspiration: I've fully designed these hinges myself from the ground up but I did take some inspiration from @Alex_cf_Siu 's hinge design and it's remixes by…
Updated December 7, 2024- Brackets now slice properly in Orca Great design by TianZi. Basically the same as the original but minor adjustments to fit K1C door holes and also allow room for the seal/strip on the door. The clips are the…
Needed hardware: 4 - 50mm m3 Round Hex Head Screws You will have to change the path of the print head cable to accommodate the rear vent. See the photos for what I did for this change. Print in ABS or ASA since the top gets the most heat.…
Hinges for 4mm acrylic plates, e.g. for 3D printer boxes. Only 2 metal screws are needed for mounting itself, all other parts are included. Please note the sides as the thread is only on one side at a time: LeftUp_RightLow = left side up…
Change log: V4 (1/10/24) - Update hinges
EDIT: First i want to tank you all who downloaded this Model i never thought it would get that interrest. :) Added 50mm Corners and 50mm Door-Corners for smaller Printers and more versability. The Corners are 150mm in each Dimension with…
A set of printed dome hinges for aluminum R2 style astromech domes. Basic assembly instructions are in the included PDF. Servo mounts have been updated so that servos are installed via caps that screw from the top. The panel plates are…
[EN] It is a common problem for the Twizy that the hinges break, because the material is not very thick. If the charging flap is not closed properly the vehicle will not move. Normally you have to replace the whole flap that might break…
A simple parametric box with latches on each side, no hinges
This Hinge design is based on the wood working technic to bend wood out of a single plate. No assembly is required with these single print in place parts. It is best to print in PETG, higher strength and flexibility then PLA. Please let…
Easy to build Trading Card Box, designed to hold about one booster box worth of Magic the gathering cards without cases. Print off one of these boxes, use two 30mm M5 Screws, two M5 nuts for the hinges, and 8 5x2mm circular magnets.
This is a simple template I created to mark the wholes for hinges for Ikea Pax system. You will need also a 35mm cutter for the big whole, the smaller wholes are 5mm, go slow because the thickness of the fronts is only 18mm (ask me how I…
![Parametric Latch box - no hinges [FreeCAD]](https://media.printables.com/media/prints/1020615/images/7751321_2a82ace9-ad66-496a-a62c-eca139efb739_ccde75db-ac8d-460f-add3-a49ae12a0f56/img_20240927_192143.jpg)
