Search results: hueforge

Sort order

4,870 models

P
PrintablesZombieHedgehog

HueForge Hummingbird

Try out this hummingbird generated using HueForge software! Play around with different colors and swap heights to customize the look. Instructions for Bambu Studio and PrusaSlicer layer swaps. Print at 100% infill with a layer height of…

Downloads
1,926
Likes
406
Rating
5
P
PrintablesAdditive Atom

Butterfly HueForge

HueForge Butterfly I created for the Polymaker Blue Start Pack of Filaments. Only manual filament swaps required. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments used Polymaker Blue Starter Pack :…

Downloads
1,287
Likes
261
Rating
4.94
P
PrintablesAdditive Atom

Fire Dragon HueForge

HueForge Fire Dragon created for the Polymaker Fire Color Set . Only manual filament swaps required. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments used Polymaker Fire Color Set: Panchroma Matte…

Downloads
1,182
Likes
354
Rating
5
P
PrintablesBottega.co.nz

Halloween - Hueforge

Original art created by us, then we used Hueforge to create this 200x200 piece Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Basic Black PLA BambuLab Basic Red PLA BambuLab…

Downloads
1,119
Likes
254
Rating
4.86
P
PrintablesFlohsen24

Cherry Blossom Bookmark - HueForge

Hello Printables makers, this is my first model . I am a new designer with an ever growing model base. I am now trying to gain a foothold in printables, I would like to offer my models here as well. I hope you like them ! Happy Printing !…

Downloads
601
Likes
180
Rating
4.91
P
Printablesfernandotg81

Moon - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Control3d Black PLA Sunlu Meta Grey PLA Control3d White Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Grey At layer #18…

Downloads
559
Likes
116
Rating
5
P
PrintablesMathoose

Gol D Roger - One Piece - made w/ HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Elegoo Gray Transmission Distance: 3 PLA PolyLite White Transmission Distance: 5 Swap…

Downloads
295
Likes
86
Rating
5
P
PrintablesBwabyPrints

Hueforge Choso 2D Art

Hello! Here is my first attempt at using HueForge for creating 2d art pieces. I used a panel from the manga to make this piece. Use the following settings for best printing: Print at 0.08mm layer height, first layer 0.16mm, 100% infill.…

Downloads
232
Likes
50
Rating
5
P
Printablesfernandotg81

Son Goku - Dragon Ball - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyTerra Charcoal Black PLA Prusament Lipstick Red PLA PolyTerra Sunrise Orange PLA ESUN PLA+ Beige PLA Control3d White Swap Instructions:…

Downloads
222
Likes
45
Rating
0
P
Printablesfernandotg81

Mickey Mouse Boat - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Control3d Black PLA+ Esun Bone White PLA Control3d White Swap Instructions: Start with Black At layer #13 (1.12mm) swap to Bone White At…

Downloads
177
Likes
26
Rating
5
P
Printablesfernandotg81

Daredevil - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Control3d Black PLA Sunlu Meta Grey PLA+ Esun Bone White PLA Overture Matte Light Gray PLA Control3d White Swap Instructions: Start with…

Downloads
117
Likes
27
Rating
0
P
Printablesnotatinker

Hueforge Lamborghini

This print uses 4 colors. I personally scaled this one to 150% to be more like a picture on the wall for my son's bedroom. Base layer: .24mm, and .08mm layer heights. 100% infill. Once you slice you can add color changes at the following…

Downloads
101
Likes
18
Rating
5
P
Printablesfernandotg81

Tazmanian Devil - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Control3d Black PLA Overture Chocolate PLA Prusament Lipstick Red PLA ESUN PLA+ Beige PLA Control3d White Swap Instructions: Start with…

Downloads
93
Likes
12
Rating
0
P
Printablesfernandotg81

Joker - Jack Nicholson - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Control3d Black PLA Sunlu Meta Grey PLA+ Esun Bone White PLA Control3d White Swap Instructions: Start with Black At layer #9 (0.8mm) swap…

Downloads
89
Likes
16
Rating
0
P
Printablesfernandotg81

Moon Knight - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Control3d Black PLA Sunlu Meta Grey PLA+ Esun Bone White PLA Control3d White Swap Instructions: Start with Black At layer #9 (0.8mm) swap…

Downloads
74
Likes
12
Rating
0

Lion Head-Hueforge (remix for Prusa MINI+ printer)

EN: Print at 100% infill with a detail layer height of 0.1 mm. No supports needed. Swap Instructions: Start with Black At 0.8 mm swap to Brown, Orange or Yellow At 1.1 mm swap to Beige or Grey At 1.6 mm swap to White for the rest CZ:…

Downloads
71
Likes
11
Rating
0
P
Printablesfernandotg81

Black Phanter - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Control3d Black PLA Control3d Blue PLA+ Sunlu Grey PLA+ Overture Ligth Grey PLA PolyTerra Wood Brown PLA Control3d White Swap Instructions:…

Downloads
62
Likes
9
Rating
0
P
Printablesfernandotg81

Uncharted - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Control3d Black PLA+ Sunlu Grey PLA+ Overture Ligth Grey PLA Control3d White Swap Instructions: Start with Black At layer #13 (1.12mm) swap…

Downloads
60
Likes
6
Rating
0
P
PrintablesAvuja

HueForge - Geisha (AI Art)

Picture: Generated with Stable Diffusion XL (metadata available in PNG file) Transparency via the extension: ‘stable-diffusion-webui-rembg’ Filaments: Prusament Galaxy Black base PolyTerra layers: Purple, Sakura Pink, Cotton White…

Downloads
59
Likes
19
Rating
5
P
Printablesfernandotg81

Elsa - Frozen - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Control3D Black PLA+ Sunlu Grey PLA+ Overture Light Grey PLA Control3D White Swap Instructions: Start with Black At layer #9 (0.8mm) swap…

Downloads
53
Likes
6
Rating
5
P
Printablesfernandotg81

Anger - Inside Out - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 150x193.79mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm…

Downloads
52
Likes
15
Rating
0
P
Printablesfernandotg81

Wolverine - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 154.79x154.79mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm…

Downloads
47
Likes
19
Rating
4
P
Printablesfernandotg81

Final Fantasy - Cloud Strife - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 162.28x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm…

Downloads
46
Likes
10
Rating
0
P

Kamado Tanjiro (Hueforge)

Hey, Je partage ma première création sur Hueforge ! Impression à 100% de remplissage avec une hauteur de couche de 0,16mm et une couche de base de 0,2mm . Le modèle a une taille de 200x112,5mm. Vous pouvez imprimer à des hauteurs de…

Downloads
45
Likes
12
Rating
0
P
Printablesfernandotg81

Lebron Logo - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Control3d Black PLA Control3d White Swap Instructions: Start with Black At layer #12 (1.04mm) swap to White for the rest.

Downloads
44
Likes
5
Rating
0
P
PrintablesLORU3D

Yorkshire terrier monje hueforge

A la impresión se le a añadido un marco autoadhesivo, de las tiendas de bazar, con el stl podréis ajustar el tamaño deseado para el marco, y siguiendo las alturas de capa. para colocar los colores, en el orden indicado por la guía de…

Downloads
32
Likes
6
Rating
0
P
Printablesfernandotg81

Master Roshi - Dragon Ball - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 150x207.61mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm…

Downloads
28
Likes
8
Rating
0
P
PrintablesPaurian

Frankenstein's monster Hueforge

I wanted to create Hueforges of the Universal Monsters (Dracula, Frankenstein, Bride of Frankenstein, Invisible Man, Wolf Man, Creature from the Black Lagoon) and this is the first work. I also wanted to make some Hueforges that are…

Downloads
27
Likes
9
Rating
0
P
Printablesfernandotg81

Edward Scissorhands - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 154.79x193.49mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm…

Downloads
25
Likes
6
Rating
5
P
PrintablesAvuja

HueForge - Mecha (AI Art)

Picture: Generated with Stable Diffusion XL (metadata available in PNG file) Transparency via the extension: ‘stable-diffusion-webui-rembg’ Filaments: Prusament Galaxy Black base PolyLite Starlight Twilight (just for fun) Prusament Prusa…

Downloads
24
Likes
10
Rating
0
P
PrintablesLORU3D

Hada y el espiritu del bosque hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PETG JAYO Black Transmission Distance: 0.3 PLA+ Sunlu Blue Transmission Distance: 4 PLA+ Sunlu Red Transmission Distance: 6 PLA+ Sunlu Green…

Downloads
24
Likes
4
Rating
0
P
PrintablesAvuja

HueForge - Geisha, Modern Disney Style (AI Art)

Picture: Generated with Stable Diffusion XL (metadata available in PNG file) Transparency via the extension: ‘stable-diffusion-webui-rembg’ Filaments: Prusament Galaxy Purple, Azure Blue, Ms. Pink Blend, Vanilla White HueForge Project…

Downloads
16
Likes
5
Rating
0
P
PrintablesVašek Martin

Japan Scenery 2 - Hueforge

Print Option: layer height: 0,10 Swap Instructions: Start with Black At layer #8 (0.90mm) swap to Dark Gray At layer #13 (1.40mm) swap to Red At layer #14 (1.50mm) swap to Pink At layer #16 (1.70mm) swap to Gray At layer #18 (1.90mm) swap…

Downloads
11
Likes
6
Rating
0
P
PrintablesINVESTEGATE

Jon Hamm Dancing Meme HueForge Wall Art Portrait - Turn the Lights Off

Jon Hamm "Turn The Lights Off" HueForge Portrait The Meme : This portrait captures Jon Hamm's iconic club dance scene from Apple TV's Your Friends & Neighbors (S1E8), which exploded as TikTok's "Turn The Lights Off" trend in late 2025. In…

Downloads
9
Likes
2
Rating
0
P
Printablespoostoon

1:10 Nami from One Piece Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 58.38x169mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.08mm and the Actual…

Downloads
6
Likes
3
Rating
0
P
PrintablesVašek Martin

Lemur Kata - Hueforge

Print Option: layer height: 0,10 Swap Instructions: Start with Black At layer #8 (0.90mm) swap to Dark Gray At layer #9 (1.00mm) swap to Dark Brown At layer #10 (1.10mm) swap to Light Brown At layer #12 (1.30mm) swap to Dark Green At…

Downloads
0
Likes
0
Rating
0
P
PrintablesPRIYANK JHA

Lion Head-Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm Swap Instructions: Start with Black At layer #8 (0.76mm) swap to Orange At layer #11 (1mm) swap to Beige At layer #18 (1.56mm) swap to White for the rest.

Downloads
6,054
Likes
1,049
Rating
5
P
PrintablesXavier Faraudo

Detailed TD calibration step test for HueForge

UPDATED 2023-07-25: Added a guide on how to use this test, plus other additional info. If you're interested just in using the test, don't read it whole; just read the “What is the Blending Distance (BD)?” section and do the steps of…

Downloads
5,116
Likes
738
Rating
4.97
P
PrintablesKitus3D

Hueforge Christmas Ornaments

There are several ways to make Ornaments + Hueforges, the easiest way was to just add a hole in Bambu studio, so I decided to bring an ornament designed from Fusion 360, and combine both. This model was not generated using AI,the photos…

Downloads
3,293
Likes
1,109
Rating
4.77
P
PrintablesAJAX

Official HueForge TD Step Test and Light Box

This is the official TD(Transmission Distance) step test developed by the creator of HueForge(listed here with his permission). This test can be used to test the TD of your filament TDs. This is the LEDs I used for the light box…

Downloads
2,260
Likes
285
Rating
4.79

StormTrooper Star Wars - HueForge

Instructions Print at 100% infill with a layer height of 0.08mm with a base layer of 0.1mm Swap Instructions : Start with Black At layer #8 (0.66mm) swap to Jade White for the rest.

Downloads
2,083
Likes
478
Rating
5
P
PrintablesAltair45

Mount Fuji Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm Filaments Used: PLA Smartfil Reciclado Negro Transmission Distance: 0.2 PLA 3DFils Galactic Red Transmission Distance: 5.8 PLA 3DFils Galactic Gray Transmission…

Downloads
2,042
Likes
656
Rating
4.92
P
PrintablesPachyderm

Map of Middle Earth - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA JAYO Black Transmission Distance: 0.3 PLA JAYO Gray Transmission Distance: 2.5 PLA PolyTerra Sunrise Orange Transmission Distance: 2 PLA…

Downloads
1,765
Likes
209
Rating
5
P
PrintablesOtherDogDesign

Parametric Frame for HueForge Filament Paintings

I created this minimalist floating Frame for my HueForge Filament Paintings. Included are the Fusion360 file and a .step file In Fusion 360 just change the user parameters “objectwidth” & “objectheight” to match your painting dimensions…

Downloads
1,676
Likes
321
Rating
5
P
PrintablesBottega.co.nz

Yoda Hueforge

Original art created by us, then we used Hueforge to create this 200x200 piece. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyLite Pro Black PLA PolyLite Steel Grey PLA PolyLite…

Downloads
1,537
Likes
320
Rating
5
P
Printablesjdlg2065

The Starry Night - HueForge

Print at 100% infill with a layer height of 0.2mm with a base layer of 0.2mm. Also, use a brim to prevent lifting in corners. Filaments Used(Try to use similar colors to match my print): Black - Hatchbox PLA Dark silk blue - Generic PLA…

Downloads
1,500
Likes
641
Rating
4.96
P
PrintablesKevyn3D

Lion - HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Black until layer #6 at 0.56mm Red until layer #19 at 1.6mm Pure Yellow until layer #23 at 1.92mm White for the rest.

Downloads
1,444
Likes
299
Rating
4.92
P
PrintablesHouston713Texan

Scary Friends (HueForge print)

100% infill first layer height .16 layer height .08 colors and swaps black layers 1-4 red layers 5-7 grey/silver layer 8 white layers 9+ few other settings I like to use are inner/ outer wall 150mm/s infill overlap 25% hilbert curve top…

Downloads
1,414
Likes
429
Rating
5
P
Printablesmichele MM3D

Another T-Rex hueforge

Hueforged T-rex 2 Print at 100% infill with a layer height of 0.08mm with a base layer of 0.32mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Jade…

Downloads
1,365
Likes
408
Rating
4.6
P
PrintablesPrintitou3D

Hueforge - Joker

The size is 133x200. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Black until layer #5 at 0.48mms Purple until layer #9 at 0.8mms Green until layer #15 at 1.28mms White until layer #26…

Downloads
1,236
Likes
353
Rating
4.93
P
PrintablesNate

HueForge Owl

Owl generated on Midjourney and STL generated with HueForge. No MMU or AMS required. Small enough to print on the Prusa Mini, but I included the HueForge project if you'd like to mix things up a bit. Print at 100% infill with a layer…

Downloads
1,190
Likes
282
Rating
5
P
PrintablesLarge Cat

Lord of the Rings - HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA+ eSun Black PLA+ Sunlu Red PLA+ Sunlu Yellow PLA+ Sunlu White Swap Instructions: Start with Black At layer #8 (0.72mm) swap to red At layer…

Downloads
1,153
Likes
312
Rating
4.95
P
PrintablesRegis

Scary Friends - Hueforge

I liked the model from Houston713Texan , but I found another image with the same characters placed in a different order and with more details. I’m really happy with the result. I used Hueforge to create this 240 x 167 piece. Print at 100%…

Downloads
1,139
Likes
373
Rating
5
P
PrintablesMathieu Thiel

hueforge delorean blueprint

hueforge delorean blueprint

Downloads
1,105
Likes
300
Rating
4.5
P
PrintablesNate

HueForge Elephant

A baby elephant image generated by Midjourney - https://midjourney.com and painted with HueForge software. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Sliceworx Onyx Black…

Downloads
1,069
Likes
326
Rating
5
P
PrintablesChrisPirillo

Star Wars (Inspired) "Sith Sunset to Sunrise" HueForge Darth Vader

Darth Vader loves watching sunrises (and sunsets). Hates long walks on the beach, however. In the early morning hours, before the galaxy awoke, Vader would venture to a secluded spot on a remote planet, far from the prying eyes of the…

Downloads
1,065
Likes
501
Rating
5
P
PrintablesCJ3dprint

hueforge cat humor

I hope you like it Please put a like it's always a pleasure and follow me Shelf Skadis Hueforge: https://makerworld.com/en/models/453432#profileId-360747 HUEFORGE Cats : . https://makerworld.com/en/models/446601#profileId-353110 .…

Downloads
1,044
Likes
415
Rating
5
P
Printablesmichele MM3D

optical illusion hueforge

Hueforge Optical Illusions Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab…

Downloads
1,032
Likes
183
Rating
5
P
Printablesmichele MM3D

Dragon Hueforge

Dragon Hueforge Print at 100% infill with a layer height of 0.08mm with a base layer of 0.48mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Jade…

Downloads
1,023
Likes
212
Rating
5
P
PrintablesThink3D

Pokebal - HueForge

Hey friends, here's my latest model. You can change the size of the X and Y axes, but DO NOT change the Z axis. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. Start with Black At layer #13 (1.12mm) swap to…

Downloads
973
Likes
451
Rating
4.86
P
Printablescyanidesugar

Piece of Junk in Space - Hueforge Print

Can it do the Kessel Run in 12 parsecs? Who knows?! This is a fairly simple print in place Hueforge Hybrid print-in-place piece that combines filament painting methods and traditional 3D printing methods in one singular print. It utilises…

Downloads
956
Likes
308
Rating
4.97
P
PrintablesTheCraftyMaker

HueForge Wall Mountable Frame (cyanidesugar collab)

IMPORTANT: This is the 3 slot version. The single slot version is available here . Update 23/02/2024 Added a new box of size W 160mm x H 240mm Update 11/01/2024 Added a new box of size W 200mm x H 200mm Update 22/11/23 Added 2 smaller…

Downloads
928
Likes
787
Rating
5
P
PrintablesSnakegreen88

HueForge Dragon

I generated a 4 color STL of the Dragon decal with the amazing HueForge program. I used blue colors but you can use any color combination you want but it is recommend to go from dark colors to light colors. if you interested in how I made…

Downloads
927
Likes
272
Rating
5

Hueforge DeadPool

Instructions: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.1mm Swap Instructions: Start with Black At layer #8 (0.66mm) swap to White At layer #14 (1.14mm) swap to Black At layer #19 (1.54mm) swap to rojo At…

Downloads
912
Likes
222
Rating
5

Hueforge Stormtrooper

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.1mm Swap Instructions: Start with Black At layer #7 (0.58mm) swap to Jade White At layer #14 (1.14mm) swap to Black At layer #15 (1.22mm) swap to rojo At layer #21…

Downloads
867
Likes
238
Rating
5
P
PrintablesJpbear09

HueForge - Charizard card

By request added another STL. of a Charizard card without the Pikachu logo, it may be a bit darker than the original print (see photo of Hueforge model) For the 90's kid nostalgia, check out my profile for more Hueforge projects ✌ Print…

Downloads
866
Likes
184
Rating
5
P
PrintablesMilhause

HueForge easy print stand

You need for display Your HueForge picture like this https://www.printables.com/cs/@DonMatis Verry fast and easy print I recommend using PETG, due to the flexibility of the joint

Downloads
830
Likes
126
Rating
5
P
Printableslostintech

Sunflower using Hueforge

If you have no idea what Hueforge is look here You need something like black, then brown, then yellow, then white for this. I used a sort of dark red as the 2nd colour, worked ok. I used bambu studio and an X1C/AMS but you can use…

Downloads
829
Likes
228
Rating
5
P
PrintablesThink3D

Pikachu - HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. 100% infill Start with Black At layer #12 (1.04mm) swap to Blue At layer #16 (1.36mm) swap to Yellow At layer #24 (2.08mm) swap to Jade White for the rest.

Downloads
824
Likes
239
Rating
5
P
PrintablesDMurr5050

Deadpool Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 156.8x235.2mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 1.8mm…

Downloads
812
Likes
193
Rating
4.91
P
PrintablesChrisPirillo

Star Wars (Inspired) "Baby Yoda Jedi Training" HueForge Grogu

Grogu, the adorable and enigmatic Force-sensitive creature, known to many as "The Child" or "Baby Yoda," had a curious habit that both amused and perplexed those around him. Whenever he had the chance, Grogu would eagerly engage in the…

Downloads
782
Likes
183
Rating
5
P
PrintablesAlex S.

Pokemon Card Mewtwo - HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. Filaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA PolyTerra Sapphire Blue Transmission Distance: 0.3 PLA PolyTerra Lavender Purple…

Downloads
777
Likes
56
Rating
0
P
PrintablesJoseph Salonis

HueForge Spiderman

***If you like what you see please give a “Like” and a “Follow”! The goal is to get over 200 followers!*** Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: JAYO Black Transmission Distance:…

Downloads
773
Likes
134
Rating
5
P
PrintablesDon Matis

Technology Themed [seamless tile] - Hueforge

A seamless tile that can be used in multiple copies to create something in large scale. The dimensions are a bit odd [196x245], but was trying to create a cover for my laptop. Print at 100% infill with a layer height of 0.08mm with a base…

Downloads
772
Likes
372
Rating
5
P
Printablespixelschubbser

Hueforge Dreaming Cleopatra Painting Illusion

Hueforge Dreaming Cleopatra Illusion You have to options: With AMS or No AMS (pause at height). It doesnt require the following brands. You only need black, white, dark grey and light grey. The frame you can get here . Print at 100%…

Downloads
755
Likes
126
Rating
5
P
PrintablesShortstuff

Hueforge LOTR map

To print this model you will either need a multi color printer, or to manually do some color swaps. There are some great tutorials on youtube for manually swapping colors. I printed this on an X1c BambuLabs printer with an AMS. If using…

Downloads
736
Likes
214
Rating
5
P
PrintablesThink3D

Stormtrooper - HueForge

Hey friends, here's my latest model. You can change the size of the X and Y axes, but DO NOT change the Z axis. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. Start with Black At layer #10 (0.88mm) swap to…

Downloads
734
Likes
224
Rating
5
P
Printablesmarkury

Swatch with Modifier for Bambu Studio (HueForge)

A pre-made 3MF for Bambu Studio that has a swatch card and a modifier already set up.

Downloads
709
Likes
35
Rating
5
P
PrintablesJohnMartin

Hueforge Stand - Hinged/Print in place

Simple, print-in-place stand for Hueforge prints or other small 2d art.

Downloads
691
Likes
97
Rating
4.89
P
PrintablesShakaStudio

Halloween Day of the Dead - 4 Color Hueforge Filament Painting

This model has been carefully designed to look great with 4 colors. This is an easy to print 4 color Filament painting to add to your other Halloween decor. Only filament swaps! No AMS necessary. This does not need an AMS to print, but it…

Downloads
689
Likes
299
Rating
5
P
PrintablesProjectNorway
18+

The source marked this model as adult content.

Downloads
685
Likes
258
Rating
5
P
PrintablesBLawl

Pokemon HueForge Cartridges (Giant and Small)

Print the cartridges at whatever setting you like. The ones pictured were printed at .16mm layer height for improved curves. A Mouse-ear brim in the corners may be necessary to prevent the corners from warping. For the HueForge prints: I…

Downloads
685
Likes
170
Rating
5
P
PrintablesHxxnrich

Darth Vader HueForge

Darth Vader HueForge Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Protopasta Black Transmission Distance: 0.5 PLA Kexcelled Red Transmission Distance: 4.5 PLA Protopasta White…

Downloads
664
Likes
171
Rating
5
P
PrintablesZGremlin

Hueforge Fallout Power Armor - 4 Color

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Beige Transmission…

Downloads
664
Likes
87
Rating
5
P
PrintablesPhil Nolan

Hueforge TD Test Grids

In Hueforge one important function is the Transmission Distance of your filament.THis test grid will help you determine the TD for each of your filaments. Be sure to use a layer height of 0.08mm and 100% infill. Start with white filament…

Downloads
651
Likes
52
Rating
5
P
PrintablesGenerlAce

HueForge - Wolverine

Instructions for Bambu Studio and PrusaSlicer layer swaps. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm This model was created with this Wolverine png. I used Elegoo Black PLA, Hatchbox Blue PLA, and…

Downloads
648
Likes
195
Rating
5
P
PrintablesSnakegreen88

HueForge Snake

I generated a 4 color STL of the snake decal with the amazing HueForge program. I used blue colors but you can use any color combination you want but it is recommend to go from dark colors to light colors. if you interested in how I made…

Downloads
646
Likes
196
Rating
5
P
PrintablesArash68

HueForge - Racoon

Put a beautifull racoon in your life ! (Because racoon is the best animal xD) Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Model size is 220 x 220 (You can reduce or enlarge the size BUT ! Not change the…

Downloads
636
Likes
144
Rating
5
P
PrintablesJeff Hengesbach

HueForge: Ghostbusters

Few Different Sizes to Pick From Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Start with Black At layer #6 (0.56mm) swap to Red At layer #16 (1.36mm) swap to White for the rest

Downloads
633
Likes
148
Rating
5
P
PrintablesC3D

Japanese Wave - Filament Painting (Hueforge)

_______________________________________________________________________________________________________ ☀ If you want to sell prints of this model, as well as all of my models, future and past , become a member of my Patreon for a…

Downloads
608
Likes
326
Rating
5
P
PrintablesHadukis

Ronin Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 186.67x250mm in size You may print at higher layer heights below the Base Thickness of 0.4mm The Max allowed Thickness is 2.16mm and the Actual…

Downloads
605
Likes
211
Rating
5
P
PrintablesBottega.co.nz

Hulk smash - Hueforge

Original art created by us, then we used Hueforge to create this 200x200 piece. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Please post you prints Filaments Used: PLA PolyTerra Charcoal Black PLA+ Esun…

Downloads
585
Likes
123
Rating
4.91
P
PrintablesDotCom Artwork

Mount Fuji HueForge

4 color image Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Start with Pitch Black At layer #7 (0.64mm) swap to Red At layer #12 (1.04mm) swap to Pure Yellow At layer #15 (1.28mm) swap…

Downloads
581
Likes
194
Rating
5
P
Printables4th Line Rebel

InsideTheDonut - HueForge

Optical illusion processed in HueForge. My first HueForge attempt. 200 x 200 Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA…

Downloads
579
Likes
152
Rating
4.67
P
PrintablesKrash 10

Hueforge Sea Turtle

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.12mm with a .2mm nozzle for best results. for .4mm nozzle try a layer height of 0.06mm with a base layer of 0.14mm. Filaments Used: PLA PolyTerra Charcoal Black…

Downloads
565
Likes
191
Rating
5
P
PrintablesBunchenator

Orchid - Hueforge

Image of an orchid under the moon. Image was generated in Midjourney and painted in Hueforge The prompt used was: “orchid, high contrast colors, moonlight, cartoon, cel-shaded art style” I am still learning how to measure transmission…

Downloads
562
Likes
196
Rating
5
P
PrintablesBottega.co.nz

Darth Vader Hueforge

Original art created by us, then we used Hueforge to create this 200x200 piece. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyLite Black PLA PolyLite Steel Grey PLA BambuLab Basic…

Downloads
557
Likes
167
Rating
4.83
P
Printableshaunter

HueForge - Power - Chainsaw Man

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Black until layer #10 at 0.88mm Red until layer #25 at 2.08mm White for the rest. Background will go away after slicing. Original artist:…

Downloads
554
Likes
167
Rating
5
P
PrintablesChrisPirillo

Star Wars (Inspired) "Skeleton Sith Skull" HueForge Halloween Darth Vader

The dark side of the Force has a mysterious and transformative effect. Darth Vader, after the events of Return of the Jedi, experiences a profound change. His physical form gradually withers away, leaving only a skeletal visage encased in…

Downloads
552
Likes
320
Rating
5
P
PrintablesReap

Hueforge Vegeta

Print at 100% infill with layer height at .12mm with base layer of .24mm used Black, Cyan, White Sunlu PLA+ Swap instructions Black until layer 8 at 1.08mm Cyan until layer 19 at 2.4mm White for the rest

Downloads
539
Likes
144
Rating
4.92