Search results: i6

Sort order

135 models

P
Printablestanmaychhatbar

Print-in-place I6

A remix that follows the firing order of a 2JZ engine. 0.4mm nozzle, 0.2mm layers (or less) Post-Printing If you can print the 3cyl engine, you should have no trouble printing this one. More cylinders, longer crankshaft, more likelihood…

Downloads
2,275
Likes
414
Rating
4.57

Clip-on Flysky I6/I6X gimbal and Switch Protector

This is a gimbal and switch protector the the Flysky FS-I6X Transmitter. It clips on where the lanyard would go. It may work with the Flysky FS-I6 but I don't have a transmitter to test it on. If someone prints it for the I6 and it fits…

Downloads
684
Likes
54
Rating
5
P
PrintablesBrayor

Rii K06 / i6 Mini keyboard + USB Dongle Case

A case for your Rii i6 / K06 Mini keyboard with an integrated USB dongle holder and phone stand! This version is reversible so you can put the mini-keyboard in either way!

Downloads
276
Likes
28
Rating
5
P
PrintablesGhislain

Mount for Technicolor Xi6 TX061AEI (Videotron Helix) TV Terminal

Description Digital File to DIY 3D print a Wall or VESA Mount for Technicolor Xi6 (Videotron Helix) TV Terminal. Model match terminal design line. The mount can be screw to wall or at the rear of TV using VESA 50x50 or VESA 75x35 holes.…

Downloads
103
Likes
4
Rating
4.5
P
PrintablesVafi

Unifi6 LR wall mount v2

Wall mount for Unifi U6 LR WiFi access point.

Downloads
91
Likes
5
Rating
0
P
PrintablesDREIDK

Wall Mount Magcubic HY300 WiFi6 Projektor

Magcubic HY300 WiFi6 Projector

Downloads
653
Likes
45
Rating
5
P
Printablesshayne

UniFi6 In-Wall Wall Mount Spacer U6-IW-US

I created this wall mount spacer to accommodate a cabinet or closet where… ethernet comes out of a grommet hole, perhaps with other wires, and you wish not to cover the hole a cut-out exists, but not a gang box/frame and you wish to cover…

Downloads
635
Likes
38
Rating
5
P
PrintablesLinkDesigns

Battery Cover Backplate for Flysky FS-i6X Transmitter

Battery covers are one of the easiest things to lose, and no one wants to order a new one and wait a couple of days to receive it. Now you can replace your backplate in under 30 minutes! Print Settings: Resolution: .15mm Supports: Yes…

Downloads
497
Likes
21
Rating
5
P
PrintablesGuido666

Stand for Ubiquiti U6-LR-US Wifi6 Access Point (AP)

Stand for Ubiquiti U6-LR-US WiFi6 wireless access point. Use #8 sheet metal screws to mount metal plate to stand. [OPTIONAL] Use #6 sheet metal screws to mount Power Injector to back. Print with extra perimeters (4-5). NOTE (14Dec2022):…

Downloads
479
Likes
33
Rating
5
P
PrintablesALE TNT

Filter cleaner iRobot Roomba Serie ei e5 e6 i3 i4 i6 i8 i7 i7+ J7 J7+ with Dyson V7 V8 V10 V10 V11

Adapter for cleaning a IRobot Roomba Serie ei e5 e6 i3 i4 i6 i8 i7 i7+ J7 J7+ with Dyson V7 V8 V10 V10 V11. Simple, no support, without snap mechanism.

Downloads
388
Likes
69
Rating
4.75
P
PrintablesMichael

Flysky FS-i6 FS-i6x Case

This is a case and insert for the Flysky FS-i6 or FS-i6x. Sized to print on a MK3 or MK4. I glued some foam to the lid of the case and created an insert for the base of the case. The Case The case is a version of…

Downloads
385
Likes
35
Rating
0
P
Printablesap.engineering

Flysky FS-i6 or FS-i6X Grips / Handles

3D scanned the Flysky Fs-i6 and created the handles to give it a wider feel. Feels like a Taranasis Qx7 in your hands. No Drilling or Gluing, just snaps in and stays put. https://youtu.be/0_VPp9_kHLE (Originally uploaded to Thingiverse by…

Downloads
331
Likes
34
Rating
5
P
PrintablesBrooks

BamVui6 - Bambulab Toolhead Mount for Stealthburner

I've always thought that the Bambulab printer is quite impressive. It can print things really fast, and it seems that the key to its speed lies in the hotend. So, can we use it on our printers? Yes, we can. However, there's a downside.…

Downloads
317
Likes
69
Rating
5
P
Printableschking

SkyFly FS-I6 Controller Case

A case to hold the FLYSKY FS-i6X 10CH 2.4GHz RC Transmitter Controller (https://www.amazon.com/dp/B07Z9YNP7S), 8x AA batteries, and assorted accessories. The battery mounts are remixed from https://www.thingiverse.com/thing:9805 and the…

Downloads
282
Likes
36
Rating
4.5
P
Printablesalpha11213

Waveshare esp32-p4-wifi6-touch-lcd-7b

Waveshare ESP32-P4 WiFi 6 7" Touch Display Case (Wall Mount + Desktop Stand) This is a custom-designed enclosure for the Waveshare ESP32-P4 WiFi 6 7-inch 5-Point Touch Display Development Board (1024 × 600), featuring a clean appearance,…

Downloads
277
Likes
6
Rating
0
P
PrintablesPaw85

ZnSe Lens Holder/Cover UNI-T UTi690A UTi120S UTi712S

This is a holder/cover for using a ZnSe lens with the thermal imager UTi690A from UNI-T. It needs to be printed in a hard/stiff material like PLA. This cover protects the ZnSe lens from both the front and back when not in use. The ZnSe…

Downloads
274
Likes
6
Rating
5
P
PrintablesSV SYA

Flysky/Turnigy i6 phone holder

I fly my drone using the receiver from eachine to receive the 5.8GHz signal video feed. This feed can be directly shown on any smartphone with an OTG USB interface! This design was based on thing: 1415509 and modified to fit a smartphone.…

Downloads
185
Likes
12
Rating
0
P
PrintablesFyrby Additive

Focusrite Scarlett 8i6 Desk/Wall Mount

Design This model is for securing a Focusrite Scarlet 8i6 underneath a desk or to a wall. There are various alternative designs but I wanted one that stopped movement forwards and backwards and both sides connected across the bottom, so I…

Downloads
172
Likes
17
Rating
0
P
PrintablesFlashmasterdash

Focusrite Scarlett 6i6 desk mount

Designed a desk mount for my Focusrite Scarlett 6i6 audio interface. The idea was to move it below the desk, to reduce the number of cables running across my desk. This thing comes with 1 model (bracket) that needs to be printed 4 times,…

Downloads
171
Likes
19
Rating
5
P
PrintablesJarda K 66

Transmitter Tray FS-i6 or FS-TM10 or TGY-i6

Transmitter Tray FLYSKY i6 or TURNIGY i6 by GeorgeXib on Thingiverse: https://www.thingiverse.com/thing:2655235

Downloads
169
Likes
13
Rating
5
P
PrintablesPaw85

UNI-T UTi690A UTi120S UTi712S Lens Cover Thermal Imager

Lens cover for the thermal imager named: UNI-T UTi690A, UTi120S and UTi712S It's a snap on fit to the thermal imager and the lanyard can be attached to it so you dont loose the lens cover when using the thermal imager. Adding the UNI-T…

Downloads
160
Likes
9
Rating
5
P
PrintablesAnton Shevchuk

UniFi6 In-Wall Wall Mount Spacer U6-IW-US Remix

Based on the original model UniFi6 In-Wall Wall Mount Spacer U6-IW-US

Downloads
150
Likes
7
Rating
5
P
PrintablesFagge

Uni-T UTi690B ZnSe Focus Lens Holder

This is a remix from https://www.thingiverse.com/thing:4967196. I have added a hole for mounting a ZnSe Focus lens in to this lens cover. Drop the lens into the hole & lock it with a clip. I printed everything in TPU except the Clip which…

Downloads
140
Likes
7
Rating
5
P
PrintablesVafi

Unifi6 LR wall mount

Wall mount for Unifi U6 LR WiFi access point.

Downloads
138
Likes
10
Rating
0
P
Printablesbigbadbruno

Flysky FS-I6X Gimbal Protector

I ran into an issue with the original model where the switch covers were attached very thinly due to needing to be bent which made them prone to breaking off. This removes the switch protectors allowing for a stronger part.

Downloads
132
Likes
18
Rating
0
P
PrintablesDotNetWorker

Rotor Riot stick gimbal protector for Flysky FS-i6 Radio

Using the Rotor Riot logo to protect your FS-i6 sticks Inspired from http://www.thingiverse.com/thing:2073993 but redrawn from scratch, using logo and joined together with a bridge as I prefer those style designs. It should protect the…

Downloads
120
Likes
12
Rating
0

AMD V340 V520 V620 MI25 MI50 MI60 MI100 MI210 Fan Shroud

I wrote a guide on how to make it more usable here: https://github.com/Szalacinski/amdv620-to-w6800-flashing-guide If you are in China, you can buy the complete kit from GS Origin here: https://item.taobao.com/item.htm?id=1052125661134…

Downloads
119
Likes
9
Rating
5
P
Printablesbangbang

unfinished Macintosh retro Mac mini m4 with iPad mini6 as monitor

Start with Fusion and when I try to print.....notice my printer is not big enough for printing this. don't want to separate the file into pieces. if you have a better idea with it wish you have better solution.

Downloads
113
Likes
13
Rating
0
P

FlySky FS-I6X extension dor Crossfire TX and external battery

FlySky FS-I6X extension dor Micro TX modul (Crossfire, ExpressLRS, etc) and external battery.

Downloads
98
Likes
9
Rating
4
P
PrintablesTong

Fuji NP 50/Pentax D-LI68 Battery Caddy

Battery Caddy for Fuji NP50/ Pentax D-Li68 single version and four batteries version printed with Prusa Mini+ with PETG

Downloads
94
Likes
0
Rating
0
P
PrintablesVA7DBJ VA7DBJ

TP Link WiFi6 AX3000 mount

Allows mounting of the TPLink AX3000 wifi antenna to a wall. Use #4 wood screws.

Downloads
91
Likes
2
Rating
0
P
PrintablesCem0s

FlySky FS-I6X FPV Screen Holder

You will need these components: M3x30 Screw *2 M3 Nut *2 M6x12 Bolt *1 M6 Nut *1 Setup: Insert the M6 nut to the slot and tighten the M6 bolt. Then insert the joint to the rod of the frame. then insert the joint part 2 and insert M3…

Downloads
88
Likes
16
Rating
0
P
Printablesw00h

Focusrite Scarlett 8i6 Desk Mount

This is just a model I made for my own purposes, maybe you find a use for it. The mount I used previously was quite flexible, not secure, and everytime I plugged something in, it moved. So I drew up another one with focus on sturdiness…

Downloads
83
Likes
17
Rating
0
P
PrintablesHrumque

Flysky FS-i6s gimbal (and switches) protector

Nice project, but little tricki to print at once. Look at screenshot, how to set on bed and set supports. Locking pin - when you put it inside and turn 90deg - its locked and dont fall of. Printed from PLA, on bambu X1, 0.2mm layer, with…

Downloads
82
Likes
6
Rating
0
P
PrintablesDyne

Strengthened Clip-on Flysky I6/I6X gimbal and Switch Protector

A slightly modified version of NathanMichaelMoore's gimbal protector to strengthen the part

Downloads
79
Likes
6
Rating
0

PERFECT FIT Flysky RC Plane Controller Battery Cover FS-i4, FS-i6, etc.

A remix of a perfect model makes it an even better fit, making sure that it can fit. All credit for the sleek aesthetic and 99% of the design goes to benbojangles: https://www.thingiverse.com/benbojangles/designs There are two versions.…

Downloads
78
Likes
10
Rating
3
P
PrintablesDucatici

Zyxel Cloud WiFi6 AX1800 Halter NWA50AX

Zyxel Cloud WiFi6 AX1800 halter für Tisch

Downloads
75
Likes
1
Rating
0

Tablet mount for FS-i6X RC radio

This is the mount I was using in my drone videos: You need to use threaded inserts to make this design work. You also need to print this project to attach it to your radio: https://www.thingiverse.com/thing:1874118 And to attach the main…

Downloads
74
Likes
19
Rating
0
P
Printablesshaman06

Desk Stand for Ubiquiti UniFi6 In-Wall

I modified a single gang box originally but it was a little small for the weight of the in-wall unit and potential pull of cables. The passthrough lets me route cables out the back. It's big but I've been using it for awhile and I think…

Downloads
73
Likes
13
Rating
0
P
Printablesmouad zarrouki

medit i600 support

for intra oral scanner medit i600

Downloads
72
Likes
10
Rating
0
P
PrintablesRamjetX

RamjetX Rii Mini i6 Keyboard Holder/Mount

Hi Internet Sim Rig Enthusiasts, If you've seen any of my YouTube game play streams, you'll know by now to skip the first 6 mins because I never have sh!t setup first go lol. But! You'll also know the struggle with the keyboard and mouse…

Downloads
69
Likes
2
Rating
0
P
Printablesmatthijsbos

Uni-T UTi260B UTi690B Lens Cover

Friction fit Onshape document https://cad.onshape.com/documents/564cafc40f26e2e23155f577/w/1b99f61fca698a9f6b175dce/e/cadc660cc3400bd68c0760fc?renderMode=0&uiState=61ba358b1c6ff91db3a7c10a Category: Tool Holders & Boxes

Downloads
69
Likes
6
Rating
0
P
PrintablesRatisse

Uni-T UTi260B UTi690B Lens Cover + multiple Macro Lens holder

Video https://www.youtube.com/shorts/X6UwkqAMoZo ________________________________________________________________________________________________________ ENGLISH -------------- I wanted to create a simple system to be able to switch…

Downloads
67
Likes
12
Rating
5
P
Printableschvvkumar

Desk stand for Waveshare ESP32-P4-WIFI6-Touch-LCD-3.4C

No supports needed for V1. V2 needs supports. Print face down for a smooth front side. The display fits in the case by friction when printed on my Prusa Mini+. 02/03/2026: V3 - Added a small inward chamfer sloping towards the screen.

Downloads
66
Likes
12
Rating
0
P
PrintablesAhamed Khan

FlySky FSi6x Transmitter Gimbal Guards

V5 of the Gimbal Guard is the one you should be printing, I've uploaded the other versions to show the iterative process I went through. V1 worked, but was terrible to remove, and was mainly to confirm my measurements. V2 was nice to…

Downloads
64
Likes
10
Rating
0
P
PrintablesDeskMachines

Focusrite Scarlett 8i6 1.25u 10 inch rack mount

Friction fit 10 inch rack mount for Focusrite Scarlett 8i6

Downloads
64
Likes
8
Rating
0
P
PrintablesUbeyd Sağlık

FlySky i6/i6X Stick Protector

Stick propector for your FlySkyi6 or FlySkyi6X

Downloads
62
Likes
2
Rating
0
P
Printablesancalotoru

FlySky Fsi6 antenna mod

This is an antenna modification for the Fsi6x that is suitable for the Fsi6 as well. With this design you will replace the stock antenna and you will not have to drill any holes in the radio. I printed as it is with supports and infill of…

Downloads
57
Likes
5
Rating
0
P
PrintablesNiko

Zero Support Clip-on Flysky I6/I6X Gimbal and Switch Protector

Print in PETG using any QUALITY or STRUCTURAL profile.

Downloads
56
Likes
10
Rating
2
P
Printablesbr3n

Polaroid (i600) Stand

Stand for Polaroid i600 photos. Can be printed without supports.

Downloads
55
Likes
13
Rating
5
P
PrintablesEconca

Uni-t UTi690A / UTi120s / UTi712s lens cover / 20 mm macro lens combo

Here is my take on a lens cover / 20 mm ZnSe macro lens combination to be used with Uni-t UTi690A (tested) / UTi120s - UTi712s (it should work as they seem to pretty much be the same camera) thermal cameras that does not require glue or…

Downloads
54
Likes
2
Rating
0
P
PrintablesGuim RH

Flysky / Turnigy i6 Transmitter FPV Mount

This is a remix form another model. Here I only uploaded the moditications done. You should go to the original part and take the misssing files. Based on this design ( https://www.thingiverse.com/thing:1607446 ) I made a new top part to…

Downloads
54
Likes
9
Rating
0

FlySky FS-i6

guiding Blade for Flysky FS-i6 if you convert to drive RC Cars with

Downloads
53
Likes
4
Rating
0
P
PrintablesBBoyd

TOADS DI6 + RPi Zero 2W Case

Description I just picked up a TOADS DB6 Digital Interface from Temporarily Offline (KM9G). I am in no way associated with KM9G, just needed a protective box for my TOADS. Now I wanted to add a Raspberry Pi Zero 2W and not have an extra…

Downloads
53
Likes
12
Rating
5
P
PrintablesWilliam Kehr

Wall mount for a Ubiquity UniFi6 Mesh that attaches to a network wall jack.

Wall mount for a Ubiquity UniFi6 Mesh that attaches to a network wall jack. https://www.tinkercad.com/things/iRDIbuNBCls

Downloads
52
Likes
8
Rating
0
P
PrintablesPrinter Go Brrr

Waveshare ESP32-P4-WIFI6 4.3inch Case

A simple case with buttons for the Waveshare ESP32-P4-WIFI6 4.3inch Development Board

Downloads
51
Likes
1
Rating
0
P
PrintablesMichaelW257

Flysky FS-i6S / TGY-i6S Gimbal Protection

Because I didn't find a gimbal protection for the FS-i6S i designed one by myself. Therefore I used the screw of the mobile/tablet mount that came with the radio but a normal M6 screw is also possible. Works pretty well. It holds the…

Downloads
51
Likes
2
Rating
0
P
Printablesspuder

FlySky i6 gimbal and switch protector

FlySky i6 gimbal protector There are several i6 gimbal protectors on thingiverse, but none of them protect the switches too. Prints best with supports and 30% infill for strength Print Settings Printer Brand: Prusa Printer: Prusa Mk2…

Downloads
50
Likes
4
Rating
0
P
PrintablesSeanTheITGuy

Flysky i6x Slider Switch Replacement

The power switch on the Flysky fs-i6x transmitter is a terrible design. It sits flush with the control face and is a smooth, chromed plastic finish. This means that if your thumbs are ever damp (or very dry) it is almost impossible to…

Downloads
47
Likes
1
Rating
0
P
Printableschvvkumar

Desk stand for Waveshare ESP32-P4-WIFI6-Touch-LCD-4C

Desk stand for Waveshare ESP32-P4-WIFI6-Touch-LCD-4C based on my other design for the 3.4" version

Downloads
47
Likes
7
Rating
0
P
PrintablesBeusekomse Baan

FlySky FSi6 steam valve knob

I re-designed RepRaptor's industrial steam valve to replace the knobs "VRA"and "VRB" on a FlySky FSi6 RC transmitter. This provides a nice nostalgic reference to the transmitter when controlling live steam locomotives. Print Settings…

Downloads
47
Likes
9
Rating
0
P
PrintablesChrisM

FlySky FS-i6 and FS-i6X replacement battery compartment cover

This is, as far as possible, a faithful re-creation of the battery cover for a FlySky FS-i6 / FS-i6X transmitter. Print settings used: - Filament - Creality Hyper PLA - Printed with the text facing upwards - 0.1mm layer height - 3 walls -…

Downloads
45
Likes
0
Rating
0
P
PrintablesKadluna

FlySky FS-i6 shelf mount

I designed simple shelf mount for my TX and connect cable for a simulator. The diameter of the holes is 5 mm. Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No Supports: Yes Resolution: 0,2 Infill: 80% How I Designed This…

Downloads
45
Likes
6
Rating
0
P
PrintablesTechGuyChad

UniFi6 Long-Range Beam Clamp Mount

Designed this Mount to be used with most common beam clamps. I needed a way to mount several of these in our Warehouse on the steel beams. This mount will adapt to most beam clamps. For reference I used these as my clamps -…

Downloads
44
Likes
3
Rating
5
P
PrintablesWojtek

Nissin Di622 Softbox mount

Today I am posting my Nissin Di622 flash mount to attach a cheap, Chinese, 4 stick softbox. It has also a slot to slide a color gel filter to change flash color. From the hardware part you will need: 2x M6 screw 2x M6 nut If someone needs…

Downloads
43
Likes
3
Rating
0
P
PrintablesAlex Veden

FlySky FS-i6 (X) neck strap balancer (longer version)

Longer version of the neck balancer for FS-i6 transmitter with larger hole.

Downloads
43
Likes
2
Rating
0
P
PrintablesDavid Ondřej

Flysky fs-i6 Hanger

printed without supports Petg 0.2 layers

Downloads
42
Likes
10
Rating
5
P
Printablespilletta

Flysky i6s trasmitter stick

This stick increases grip and precision in movements To install the stick insert an m3 insert into the hole, unscrew the original stick and screw this one

Downloads
40
Likes
3
Rating
0
P
PrintablesMathew

THROTTLE STICK SELF CENTERING ADD ON - FLYSKY FSI6

self‑centering add‑on for RC transmitter sticks. Just place it over the throttle stick and secure it with elastic band.

Downloads
40
Likes
6
Rating
0
P
PrintablesRatisse

Uni-T UTi260B UTi690B UNi690B LCD+Keyboard cover

Protective cover for the screen and the keyboard of the thermal imager UNI-Trend UTi290B, UTi690B. You will need 8 magnets 5x1.7mm, double sided tape for the base, paper glue for the text Do not take into account the apparent play on the…

Downloads
37
Likes
6
Rating
0
P
PrintablesJason Coon

Fibonacci64 Case with Paper Diffuser - 86mm disc with 64 WS2812B RGB LEDs and Wi-Fi

Fibonacci64 is a beautiful 86mm circular disc with 64 WS2812B RGB LEDs surface mounted in a Fibonacci distribution. Fully open-source software, and programmable over Wi-Fi or micro USB cable. Build your own, or buy a kit from Evil Genius…

Downloads
33
Likes
9
Rating
0
P
PrintablesWiseone

Fisher and Paykel BI602X Wall Oven Soft Touch Button Replacement

Our Fisher and Paykel BI602X Wall Oven started to have an issue with the Soft Touch Buttons. The button edges started to crumble. It was only a matter of time before the buttons would stop being functional and they were starting to be…

Downloads
33
Likes
3
Rating
0
P

Threaded insert frame for FlySky FS-I6X handles

Threaded insert frame for FlySky FS-I6X handles.

Downloads
33
Likes
6
Rating
0
P
PrintablesJason Coon

Fibonacci64 Case with 3mm Acrylic Diffuser - 86mm disc with 64 WS2812B RGB LEDs and Wi-Fi

Fibonacci64 is a beautiful 86mm circular disc with 64 WS2812B RGB LEDs surface mounted in a Fibonacci distribution. Fully open-source software, and programmable over Wi-Fi or micro USB cable. Build your own, or buy a kit from Evil Genius…

Downloads
31
Likes
6
Rating
0
P
PrintablesRedShark

Mikrotik AX2 wifi6

rack mount for MikroTik hAP ax2

Downloads
30
Likes
1
Rating
0
P
PrintablesDaniel Sp.

Einbautopf für Rauchwarnmelder Ei650

Mit diesem Einbaugehäuse können die Rauchwarnmelder der Firma Ei Electronics in eine geschlossene Gipskartondecke eingelassen werden, um eine gefälligere, flache Optik zu erzielen. Alle für die Funktion erforderlichen Öffnungen, sowie die…

Downloads
30
Likes
1
Rating
0
P

FlySky Fs-i6x Gimbal and Switch Protector - Elastic Retention and Nameplate

Covers for FlySky Fs-6x and FlySky FS-i6x style transmitters to protect the gimbals and switches in transport. I've broken enough switches that it was time to get something more suitable for the abuse my gear goes through, getting chucked…

Downloads
29
Likes
1
Rating
5
P
PrintablesJason Coon

Fibonacci64 Open Case with 3mm Acrylic Diffuser - 86mm disc with 64 WS2812B RGB LEDs and Wi-Fi

Fibonacci64 is a beautiful 86mm circular disc with 64 WS2812B RGB LEDs surface mounted in a Fibonacci distribution. Fully open-source software, and programmable over Wi-Fi or micro USB cable. Buy fully assembled or as a kit from Evil…

Downloads
26
Likes
8
Rating
0
P
PrintablesDyne

Flysky FS-i6X Accessory Mount

This started out as a project to attach a Kyber button board (and more to the point, the buttons) to my FlySky R/C radio transmitter. It has since evolved into a modular accessory mount; the button mounting parts are still included and…

Downloads
26
Likes
4
Rating
0
P
PrintablesSeanTheITGuy

Flysky FS-i6 Grips (Separated)

I did nothing to modify this design, except to separate the two parts into two different STL files so they could be printed (or reprinted) individually. All credit to JCG_RC for the effort to scan and design the grips. Category: R/C…

Downloads
25
Likes
2
Rating
0
P
PrintablesJoseph Clarke

Mini68 - The minimalist Handwire Keyboard

A keyboard based off the Sick68 in case anyone is interested in a more minimalist aesthetic. Using an arduino pro micro “upgraded” to get 2 extra pins, here is a guide. Key layout is the same as the sick68 (As it uses the same plate) I…

Downloads
25
Likes
8
Rating
0
P
PrintablesHachiro

FlySky i6Xb Case

Feb 2026: Decided to move a few of my models to public domain. Simple case for FlySky's new radio receiver! (I printed in clear PLA) It prints in two parts, and screws together using 2mm tapping screws. I used 11mm length screws.

Downloads
25
Likes
5
Rating
0
P
PrintablesChicken

Flysky FS-i6X Joystick Attachment Shrek head

You can get the controller at https://a.co/d/cC7XSKp

Downloads
25
Likes
8
Rating
0
P
PrintablesTannenbaum 18

FlySky FS-i6X Custom Backplate (Radiomaster ELRS Nano Module + 2S 18650) | OpenTX Upgrade

Upgrade your budget FlySky FS-i6X into a fully capable ELRS radio! I designed this custom back cover to fit a Radiomaster ELRS Nano module and a 2S 18650 Li-ion battery pack . Combined with the OpenTX/EdgeTX mod for the FS-i6X, this turns…

Downloads
24
Likes
4
Rating
0
P
PrintablesRoot User

FS-I6 Better Power Switch

Replacement power switch for flysky i6 and other similar R/C controllers. I don't like the original switch because its hard to switch because its so small and slick. This is loosely based off of GenesisR's version. I took the switch…

Downloads
24
Likes
0
Rating
0
P
PrintablesSteve Shockley

ESP32-P4-Wifi6-POE-Eth KVM case

A board to contain the Waveshare ESP32-P4-Wifi6-POE-Eth board with HDMI adapter for use as a KVM. Use software such as https://espkvm.io (or http://github.com/espkvm/espkvm ). Also posted at…

Downloads
24
Likes
3
Rating
0
P
Printableschvvkumar

Waveshare ESP32-P4-WIFI6-Touch-LCD-4B Mount

V2 - Added space for the onboard speaker's sound to escape from the bottom when in ports facing up orientation. Made for my NINA display project https://github.com/chvvkumar/ESP32-P4-NINA-Display

Downloads
23
Likes
3
Rating
0
P
Printablesphotobix

Wrist Rest for Ikki68 keyboard / Handballenauflage für Ikki68 Tastatur / magnetic / magnetisch

English: I created one here, quickly, for my Ikki68 Keyboard: Width: 343mm Height between 17 and 20mm Depth: 100mm Printparameter: 2 perimeters 13% infill PLA There are 2 parts, which are held together by magnets. Suitable are magnets…

Downloads
22
Likes
3
Rating
0
P
Printableschvvkumar

ZWO ASI676MC AllSky Focusing Mount and Gear

Printed with PETG. Code for controlling the stepper with either a Pi5 or ESP32: https://github.com/chvvkumar/allsky-asi676-focuser

Downloads
20
Likes
3
Rating
0
P
PrintablesGavin

Battery Cover for a Turnigy -i6 Transmitter

Battery Cover for a Turnigy -i6 Transmitter

Downloads
20
Likes
0
Rating
0
P
Printableskang wang

iPad mini6 backpanel

this is a extremely fine ipad case. stick this panel on your ipad mini6's back so yu can gain a smooth naked ipad.(Sand it to get a better feel, use cloth-based double-sided tape to stick it better)

Downloads
20
Likes
2
Rating
0
P
PrintablesDyne

FlySky i6X DIY Harness Clips

Note: While this printable was designed for the FlySky i6x, there's no particular reason you can't use the parts with any similar R/C radio, as long as you can find a place to attach the screws that doesn't short out the radio. Background…

Downloads
20
Likes
3
Rating
0
P
PrintablesDavid Rios

Banana Pi Bpi r3-mini / wifi6-mini

A case for Banana Pi BPI-R3-Mini and BPI-WiFi6 Mini (they are compatible), with space for internal antennas and a 37x37x24mm heatsink. Needs 4 M3 insets and screws.

Downloads
19
Likes
2
Rating
0
P
PrintablesPesh115

UniFi6 In-Wall Wall Mount Spacer U6-IW-US + OnQ Bracket

This remix is the combination of two designs. The UniFi6 In-Wall Wall Mount Spacer U6-IW-US by Shane (printables.com/model/269375-unifi6-in-wall-wall-mount-spacer-u6-iw-us/remixes) and the OnQ Bracket by Nick Berardi…

Downloads
18
Likes
0
Rating
0
P
PrintablesFB Designs

Flysky FS-i6X (Fs-i6) 3rd Gimbal

Flysky FS-i6X (FS-i6) 3rd Gimbal Hi, I have designed a fully functional 3rd gimbal that can be run off 2 of the Aux’s (VRA & VRB) with minimal modification to the original components and no extra programming needed while still maintaining…

Downloads
18
Likes
1
Rating
0
P
Printableshiroken55555

GM 4.2L Atlas I6 Ignition Coil Seal fits 02-09 Trailblazer and ENVOY

It's a replacement part for Ignition Coil seal on GM 4.2L I6 Atlas engine. Supposed to fit 02-09 Chevy Trailblazer and GMC Envoy. Mine is 03 GMC Envoy with 170k miles and all genuine rubber seals were cracked. Replacement rubber seal is…

Downloads
17
Likes
2
Rating
0
P
PrintablesUrkan San

Modular Foldable Flysky i6 Protector

03/01/2019 I had to reprint my transmitter protector so while I was at it I decided it is right time to modify two of parts to make it easier to attach it on transmitter. (wider fillet holes at the bottom) I uploaded three NEW objects…

Downloads
16
Likes
4
Rating
5
P
Printableschvvkumar

ASI676MC AllSky Mount

ASI676MC AllSky Mount for MAKERELE Waterproof Junction Box Outdoor Junction Box ABS Plastic Waterproof Universal Electrical Project Box (Grey Cover, 11.8 7.8 6.3 Plastic latches) https://www.amazon.com/dp/B08PPF9RVF

Downloads
15
Likes
3
Rating
0
P
PrintablesFagge

Protective cover for Uni-T UTi690B ZnSe Focus Lens Holder

Related to: https://www.printables.com/model/116330-uni-t-uti690b-znse-focus-lens-holder

Downloads
15
Likes
2
Rating
0