Search results: ibo

Sort order

4,483 models

P
PrintablesRedKrieg

Fibonacci Golf Ball

I did not like any of the parametric golf balls I was able to find, so I designed my own. This uses the fibonacci lattice to distribute points on the surface of a sphere in a relatively even way. The included STL has a diameter of 42.7mm,…

Downloads
4,018
Likes
90
Rating
4.86
P
Printablesbigalex

Double Clip Cable Tie - Powerstrip Holder for Multiboard ("Underware" Cable Management System by HandsOnKatie)

Enlarged and modified version of @BobMcGlobus_870140 click connector plate for attaching power supply units or power strips to Multiboard with cable ties. (Matching the “Underware” cable management system from HandsOnKatie.) The original…

Downloads
578
Likes
98
Rating
5
P
PrintablesM4NU

Fibonacci Heart Pendant

The shape of the pendant was created while playing with the Fibonacci curve. It is a kind of “symetrical fractal” of the curve. The bottom is deformed from the original curve to look like a heart. Print Settings : Printed on MK3S Filament…

Downloads
437
Likes
115
Rating
5
P
PrintablesŁukasz Dubczyk

Lego Fibonacci gear 27 teeth

Lego Fibonacci gear 27 teeth

Downloads
305
Likes
41
Rating
4.5
P
Printables3DJG

Fibonacci spiral

Fibonacci spiral / Espiral de Fibonacci English “The beauty of mathematics”. The Fibonacci spiral is obtained from the Fibonacci sequence: 0 1 1 2 3 5 8 13 21 34 .... , drawing quarters of a circle, resulting in a good and amazing…

Downloads
289
Likes
30
Rating
5

ⲫ Fibonacci Spiral Vases

4 and 6 sided Fibonacci vase mode spirals. Uses a simple formula from nature to create the pattern. Scalable.

Downloads
176
Likes
38
Rating
4

60mm Fan guard for EIBOS 3D Filament Dryer CYCLOPES

60mm Fan guard for EIBOS 3D Filament Dryer CYCLOPES, but can be used for any other fan :) After the fan grill of my EIBOS Filament Dryer melted, I had to replace it. I liked the design of https://www.thingiverse.com/thing:1274150 and did…

Downloads
159
Likes
12
Rating
0
P
Printableskcwu

Eibos Cyclopes Drier Fan Converter

Eibos Cyclopes Drier's fan is noisy. Inspired by https://www.printables.com/model/51737 , I created another fan converter for Noctua 80mm fan. Features (compared to 51737): Have hole for fan cable Better air flow (I hope so. I'm not sure)…

Downloads
150
Likes
31
Rating
5
P
PrintablesZombiPach

Handle for Eibos Cyclopes

This is an easy to install handle for the Cyclpes. It's the first model i've shared, and it represents a few expirements I was doing with PrusaSlicer. I also incorporated some FFM design principles I've been reading about. It's not…

Downloads
128
Likes
17
Rating
5
P
Printableselod

beefy zaribo geared extruder mod

R2 is a much more solid and beefier and rigid version of zaribo geared extruder body in a tradeoff 16g extra weight (if printed from ASA) still superlight but no flexing, everything else is the same, see bellow official guide…

Downloads
108
Likes
11
Rating
5
P
PrintablesDe Jennes

Fibonacci Spiral Clock

A clock frame designed to work with any 55x55 clockwork (easily found in your favorite electronics shop). The design is made so it will be printable with both a single material printer and an MMU printer. The pattern used is based on…

Downloads
102
Likes
14
Rating
0
P
Printables_KaszpiR_

Drybox Clip for Round Multibox 3.4L EAN 8694064003156

About Round Multibox 3.4L (EAN 8694064003156, produced in Turkey) with internal diameter of 22cm can be used as dry box for storing a spool of filament. It lacks seal and is made from elastic plastic so it needs tightening - that's why I…

Downloads
100
Likes
14
Rating
5
P
PrintablesSar

Eibos cyclopes filament holder for Bones Bearings reds - 18022

I think the eibos cyclopes is great. Only the supplied bearings were much too stiff for me. The holder is inserted into the existing receptacle. I installed the Bones ball bearings 18022 in the wheels. Now it runs perfectly and without…

Downloads
70
Likes
12
Rating
5
P
PrintablesFraham

Multiboard multiconnect multimeter holder

Holder for a multimeter on a multiboard using the multiconnect connectors Used a 0.4 nozzle on 0.2 layers with 15% infill

Downloads
63
Likes
11
Rating
0
P
PrintablesLautaro Lopez

Xiaomi Precission Screwdriver Holder for Multiboard - Push Fit

Print orientation as it is on the file. No supports needed. Tested with Grillon3 PLA (Argentina), 0.4 nozzle and 0.2 layer height in a Ender 3 v2 Neo.

Downloads
58
Likes
4
Rating
0
P
Printablescrashkg

Eibos Cyclopes Desiccant Holder and Plug

I was struggling to keep filament stored in the Eibos Cyclopes dry. The other filament holders did not get enough humidity out. I designed this desiccant holder to mount to the top of the cyclopes and still allow the vents to be opened…

Downloads
56
Likes
9
Rating
0
P

Fibonacci Verticle Whirl-i-Gig

The Fibonacci sequence is a mathematical sequence that appears in many natural patterns, and art works that are pleasing to the eye. Each square side dimension is the sum of the previous two sides. A quarter circle is drawn in each square…

Downloads
50
Likes
17
Rating
5
P
PrintablesEthan

Multiboard - Hexagonal 33mm opening gluestick holder

Multiboard holder in hexagonal shape with a 33mm opening and 55m tall overall. Designed as a gluestick holder but works for so much more. Credit to Jonathon at @KeepMaking for the multiboard.

Downloads
49
Likes
7
Rating
5
P
Printablesboomke

eibos cyclopes small spool adapter

i didnt like that Gerfunky used other bearing and rods for holding the spools on so i adapted his model so u can use the bearings that come with the eibos cyclopes and also the rods.

Downloads
48
Likes
3
Rating
0
P
Printablescrashkg

Eibos Cyclopes Lid for Dessicant Basket

This lid is a tight fit by design. You have to slide into the space under the handle and the plastic will flex a little bit. Once it has snapped into place you can bend a corner back to pour dessicant pellets in or out. If you drop the…

Downloads
47
Likes
10
Rating
5
P
PrintablesMartin

LDO OLED Display Mount for Prusa i3 MK3/S/S+ (for use with Caribou OLED Case)

This is a remix of the original mounts from Caribou3D for the LDO OLED display to fit onto the Prusa i3 MK3/S/S+. You can use all 4 screws in the Prusa front plate to mount the OLED display. Use the mounts with the original Caribou3D OLED…

Downloads
44
Likes
8
Rating
5
P
Printablesflipmarley

Fibonacci Desk Organizer

outer dimensions are 80.8mm x 130.8mm x 60mm designed for 0.4mm nozzle modify the scad file to easily change the height, scale, wall thickness, or add more chambers

Downloads
41
Likes
11
Rating
0
P
Printables3DHippo

Haribo Frog Keyring

Bring a little sweetness to your everyday life with this adorable keyring inspired by Haribo’s frog! This design was created by 3D scanning a real Frog candy (my absolute favorite sweet!) and refining the details in Blender to give it a…

Downloads
38
Likes
11
Rating
0
P
PrintablesPitel

Sonic Amiibo tag

Don't forgot to add M601 pause around 3 mm and color change for the logo!

Downloads
38
Likes
3
Rating
3.5
P
Printableseloekset

MultiBoard Glue holder with label

For the MultiBoard system. This is a medium press fit holder for a glue bottle (Magigoo) or large glue stick. I printed with paint-on supports under the clips of the label holder. Label is printed with two colors on an MK4 without MMU,…

Downloads
34
Likes
7
Rating
0
P
Printableskenzo

Fibonacci Tree with tree supports

a Fibonacci Tree with tree supports

Downloads
31
Likes
4
Rating
0
P
PrintablesSilvenga

EIBOS Cyclopes Accessories

Introduction This is an accessory pack for the EIBOS Cyclopes. A handle that connects to the top using two of the seven mount holes. Plugs to plug the 10 filament holes. A M6 washer to connect a PC4-M6 PTFE Tube Connector to one of the…

Downloads
31
Likes
4
Rating
0
P
PrintablesIrgendeintyp

Oventrop UniBox Cover for Bosch Smart Home Radiator Thermostat II

This cover allows you to install a Bosch Smart Home Radiator Thermostat II within an Oventrop UniBox, enabling control of your underfloor heating circuit. Important: Please note that the peg spacing and dimensions from the original design…

Downloads
25
Likes
2
Rating
0
P
PrintablesChris Donnelly

Fibonacci stamp

I made this stamp for people to be able to easily change it to their own design. The drawing is on a construction plane 2mm away from the body of the stamp. If you change the contents of the drawing, the extrusion and fillet should follow…

Downloads
23
Likes
4
Rating
0
P
PrintablesRoromoomoo

Sun Glasses arm: Tribord sailing polarised sunglasses 500

Designed using Autodesk Fusion. I printed with Anycubic Kobra neo 2. There is a face you are able to print from at that allows for less supports needed for parts of the print that are at an angle. I used callipers to take measurements of…

Downloads
22
Likes
1
Rating
0
P
PrintablesGFS

Keychain with logo. Electric scooter: Dualtron, Gotrax, Hiboy, Hiley, iscooter, Kukirin, mi, Nami, Ninebot, Niu, Razor, Sagway.

Keychains in various versions. Dualtron Gotrax Hiboy Hiley iscooter - 3 colors Kukirin mi Nami Ninebot Niu Razor Sagway Technical details: - Changing the logo color. The clip thickness without the logo is 3 mm. For a 0.12 mm layer - From…

Downloads
8
Likes
0
Rating
0
P
Printableseloekset

Multiboard cover for lab power supply

To get the lab power supply out of the way when not in use, I needed a box to cover it up in a dusty environment at the workshop. This model was designed specifically for the Velleman LABPS3003SM power supply , but it actually got a bit…

Downloads
6
Likes
1
Rating
0
P
Printableseloekset

Multiboard boxes for Luxorparts Pro 60 W soldering station

Two boxes to hang a Luxorparts Pro 60 W soldering station on a Multiboard wall. It consists of a box for the power unit and another box for the soldering iron. The boxes have cutouts for the cords going between the iron and power unit,…

Downloads
5
Likes
0
Rating
0
P
PrintablesDavid D

Multiconnect - generic connector for multiboard

Important announcement: I released version 2 of the multiconnect system for multiboard . This version is fully compatible , but also incorporates some handling and versatility improvements. I recommend to always print the new versions.…

Downloads
18,706
Likes
1,829
Rating
4.92
P
PrintablesDavid D

Raised Multiconnect - generic connector for multiboard v2

Generic connectors to hang your bins/shelves or anything else to your multiboard, now in version 2. The connector is pretty generic and allows you to attach anything you want. Note: There also is a flush version of multiconnect for…

Downloads
8,512
Likes
817
Rating
4.78
P
PrintablesDavid D

Multiboard gridfinify shelves

About: Want to attach your existing gridfinity bins to your new multiboard wall or just use the existing containers you already printed? This is just the right solution for you. Just download some multiboard connector , connect it to your…

Downloads
7,712
Likes
1,333
Rating
4.92
P
PrintablesBlenderBender

Creality K1 / K1C Unibody Riser Frame

I love the design of the Creality K1 printers. The unibody frame with the beveled edges and corners is just awesome. There are already a lot of risers for this printer out there, but this one extends the original frame of the K1 / K1C.…

Downloads
6,572
Likes
930
Rating
4.93
P
PrintablesJ3D_Designs

Multiboard Caliper Holder

Update ****** Additional Version to add Multiconnect version from @DavidD V2 - Multiboard Multiconnect Caliper Holder Layer: 0.20mm Infill: 15% Support: Yes (Lines) Bed Adhesion: None or Skirt Speed: 180mm/s Wall Line Count: V1 -…

Downloads
4,956
Likes
488
Rating
4.64
P
PrintablesHexiBase

HexiBox Series: Dayton TCP115-4 7th Order Bandpass Subwoofer

As seen on X and YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.

Downloads
4,663
Likes
670
Rating
5
P
PrintablesBlenderBender

Creality K1 / K1C Unibody Riser Hexagon Plates

Hexagon plates for K1/K1C Unibody Riser Frame . It is a two parts print that should be gluwed together. The plate has clips so you do not need to glue it onto the Unibody Ricer frame. Update 2024-09-28 : I made it easier for you to create…

Downloads
4,268
Likes
430
Rating
4.88
P
Printablestechteacher007

Liam F1 Wind Turbine | Fibonacci/Archimedes Golden Ratio

Wind Turbine inspired by the Liam F1, using fibonacci sequence for the blades. Leaves in a fibonacci pattern in plants maximise the area for photosynthesis and minimise the amount of blocking overlap. The same prinicpal can be applied to…

Downloads
4,062
Likes
360
Rating
5
P
PrintablesDavid D

Multiboard bin system

Every multiboard needs to have some bins to put stuff in. Need any useable size you can just attach end easily remove, use the multiboard bin system. Note: You may also like the open bins I created, which allow easy front access. Also you…

Downloads
3,969
Likes
569
Rating
5
P

Fibonacci Hook

This Hook is inspired by piesupplies' Desk Bag Hook ( https://www.printables.com/model/1453-desk-bag-hook ) The Fibonacci Hook is based on a Fibonacci Spiral and is completely customizable. It fits different desk thicknesses and you can…

Downloads
3,948
Likes
966
Rating
4.88
P
PrintablesHawk7

LED Frame 2.0 (Multiboard) for IKEA SKADIS

LED-Frame 2.0 for IKEA SKADIS pegboard 🚀 FINALLY I can share the multi-board version of my LED-Frame. It's controlled by an ESP32-Controller running WLED. The frame is divided in smaller segments, so it can be printed on smaller printers…

Downloads
3,860
Likes
3,251
Rating
4.94
P
Printablesmmuellerphoto

Multiboard - Bit Holder V2

In addition to my Multiboard “ Bosch Go Holder ” the Bit Holder. Version 2 also available now. Length reduced to 124mm to be able to mount two holder right next to each other. If you like what I do feel free to buy me a …

Downloads
3,675
Likes
486
Rating
4.92
P
PrintablesSOME Studio

Tape Measure Multiboard Mount

A mount for a tape measure or anything that has a belt clip. This works with multiboard . It uses the peg holes. Print in the following orientation with outside brims on. No need for supports.

Downloads
3,630
Likes
398
Rating
4.98
P
PrintablesStranula

Screwdriver Holder Multiboard - Multiple Mounts

I'm building out my multiboard and I like the weight bearing snaps as they feel the most secure for my setup, so I put this one together and am pleased with how it turned out Details: Elegoo Neptune 4 Pro 0.6 mm nozzle 15% infill 1.2 mm…

Downloads
3,620
Likes
478
Rating
4.78
P
PrintablesNebulaNoob

Team Sonic Figurine Set, SSBU Sonic, Tails, Knuckles, & Super Sonic amiibo figures

First set of Sonic figures based on Team Sonic. Set inludes · Modern Sonic (SSBU Pose) · Modern Tails · Modern Knuckles · Super Sonic (SSBU Pose) (Don't have pics sorry) · Super Sonic V2 (Original Pose) All my figurine models will always…

Downloads
3,363
Likes
313
Rating
4.17
P
PrintablesDrTob

Multiboard Snap Mount

Snaps for screwing tiles directly onto the wall. Prints without support I tried using the (old) original parts, which are designed for mounting tiles directly to a wall, but the screw-in fasteners turn when you fasten the screw, and they…

Downloads
3,274
Likes
367
Rating
5
P
Printablesmeet

Cable holder mods: Wall mount | Honeycomb (HSW) | Multiboard

Do you like the Cable holder ? Then here you have a remix with a few improvements! This remix brings several modifications that improve the original model: Several size options Rounded edges of the model (the original model has sharp…

Downloads
3,226
Likes
430
Rating
4.96
P
Printablesandrepadua

Drill Holder for Multiboard - Won't Fall!

Gone down the deep end on Multiboard? Me too! Check out my collection of Multiboard Models here! Comments 2024-06-08 Update: I've added a 2nd version that uses Small Threat T-Bolts to attach to the Tile. This May be an alternative if you…

Downloads
3,142
Likes
371
Rating
4.81
P
PrintablesKunzite

Multiboard Hook Pin

Te used with the www.multiboard.io system A small and strong screwable hook to be used in the Multiboard pegboard holes. The hook is printed sideways to make it very strong. Orientation The orientation of the hook will vary depending on…

Downloads
3,091
Likes
495
Rating
4.94
P
PrintablesDavid D

Multiboard open bin system

Every multiboard needs to have some bins to put stuff in. Need any useable size you can just attach end easily remove, use the multiboard bin system. This is a variant of my normal bins to allow access from the front. Howto use: You will…

Downloads
3,043
Likes
437
Rating
4.69
P
PrintablesFilip Kavan

Multiboard screwdriver holder/shelf

Multiboard screwdriver holder/shelf, robust design scaled for maximum volume of ender 3. Shelf is prepared for multiboar system: www.multiboard.io I also added support for more rigidity. V2: 7mm storter for better fit on Ender build…

Downloads
2,940
Likes
446
Rating
4.69
P
PrintablesRedKB

Multiboard Hammer Hook

This is a multiboard compatible hammer hook I designed to use the standard multiboard pegboard click. This should hold any standard hammer. I printed at a 45 degree angle to give all sides a consistent texture with tree supports.

Downloads
2,878
Likes
335
Rating
5
P
PrintablesBlenderBender

Creality K1 / K1C Unibody Riser Hinges

Hinges option for Creality K1 / K1C Unibody Riser https://www.printables.com/model/891616-creality-k1-k1c-unibody-riser Uodate 2024-10-20: Redesigned hinges for new version of the frame. Update 2023-07-14: I have updated this model.…

Downloads
2,838
Likes
306
Rating
4.45
P
PrintablesNerlin

Tool Holders for Filament Cutters/Pliers and Wire Strippers for the Multiboard Storage System

For the Multiboard Storage System. The cutters fit standard filament cutters (Creality) or pointy nose pliers. The wire strippers fit the ones in the picture. It may or may not fit a different brand.

Downloads
2,641
Likes
347
Rating
5
P
PrintablesItssunnyb

Scissor Holder for Multiboard

A remix of a scissor holder Multiboard https://www.multiboard.io Print settings: Material PLA+ Layer Height 0.2 Perimeters 4 Infill 15%

Downloads
2,388
Likes
317
Rating
4.94
P
PrintablesStranula

Multiboard Corners 45° & 90°, 6.25, 8, 12.5 & 15mm

I have an insider corner above my workbench where I am putting up a multiboard. I couldn't make any of the premade brackets work for my needs, so I made my own. These are working for me and can be seen in the attached images Updated…

Downloads
2,288
Likes
329
Rating
4.9
P
PrintablesItssunnyb

Single/Dual Wire Cutter/Plier Holder for the Multiboard

Dual Wire Cutter/Plier Holder for the Multiboard -Added a single cutter/plier option Multiboard https://www.multiboard.io Print settings: Material PLA+ Layer Height 0.2 Perimeters 4 Infill 15% No supports

Downloads
2,276
Likes
253
Rating
4.97
P
PrintablesNolan Garmon

Pen/Pencil/Tool Cup Multiboard Push-Fit

Pen/Pencil/Tool Cup Holder Multiboard Push-Fit Mount

Downloads
2,261
Likes
216
Rating
4.76
P
PrintablesDrTob

Plier holder 1-6x for Multiboard (PushFit)

Plier Holders for Multiboard, prints without support

Downloads
2,222
Likes
284
Rating
4.95
P
PrintablesDavid D

Multiconnect for Multiboard v2 - Modeling files

Multiconnect is a generic system to hang things to your wall or any board (like Multiboard or Honeycomb). Those files here should only be used for modeling, allowing you to create any variation of multiconnect you want. This is version 2…

Downloads
2,153
Likes
165
Rating
5
P
PrintablesDavid D

Multiconnect for Multiboard - Modeling files

Multiconnect is a generic system to hang things to your wall or any board (like Multiboard or Honeycomb). Those files here should only be used for modeling, allowing you to create any variation of multiconnect you want. For new models I…

Downloads
2,108
Likes
143
Rating
5
P
PrintablesItssunnyb

Caliper Holder for the Multiboard

Multiboard https://www.multiboard.io Print settings: Material PLA+ Layer Height 0.2 Perimeters 4 Infill 15%

Downloads
2,041
Likes
223
Rating
4.91
P
PrintablesHands on Katie

Set of Hooks for Multiboard (Multiple Sizes)

This set includes the following sizes: Mini hook (25cm) Standard hook ( 50cm diameter) - great for Cricut vinyl rolls, wrapping paper, compost bag rolls, hammers. Grand hook ( 75mm diameter) - I use these for larger vinyl rolls, silicone…

Downloads
2,015
Likes
317
Rating
5
P
PrintablesDavid D

Flush Multiconnect - generic connector for multiboard v2

Generic connectors to hang your bins/shelves or anything else to your multiboard. The connector is pretty generic and allows you to attach anything you want. This is the version of multiconnect optimised for usage with Underware and the…

Downloads
1,992
Likes
184
Rating
5
P
Printablesdjkirkendall

Multiboard - Parts Bins

I couldn't find a plain stackable bin that fit the multiboard holes, so I made my own. The bottom is rounded to make for easy scooping I optimized the wall thickness for least material / strongest part They are stackable 3 sizes:…

Downloads
1,992
Likes
537
Rating
4.5
P
PrintablesAsh

Multiboard - Hex Bit Holder REMIX 135-Bits

It fits perfectly on a 8x4 Board or just like me 2x of them on 8x8. It's designed to use the Board connectors @ the edges to increase efficiency of the build. During the time I've collected too many Bits! That's why I've had to do this. I…

Downloads
1,899
Likes
315
Rating
4.69
P
PrintablesPatrik

Multiboard pegboard click hooks in various sizes

When I didn't find hooks in sizes I needed I created a set of hooks in the following sizes: 20, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 85, 90, 95 and 100mm. The hooks are click hooks. Recommended print settings (same as…

Downloads
1,870
Likes
230
Rating
5
P
Printables4D Labs

Multiboard Bolt Driver

This is a remix of "Screw Driver" by megatron321 ( https://www.thingiverse.com/thing:709811 ) 0.2mm quality No supports needed if printed vertically This screw driver has been adapted to drive MULTIBOARD bolts and T-Bolts. After…

Downloads
1,859
Likes
334
Rating
5
P
PrintablesHugo

Gridfinity Multiconnect (multiboard) drawer system case (Redesigned with Fusion 360)

Note : In the pictures, the feet are on the top instead of the bottom, I fixed that in the model after realizing that they where feet and not just connecting pegs! Fusion 360 redesign of the Chipp Walters' drawer system design (just the…

Downloads
1,856
Likes
479
Rating
4.75
P
PrintablesSOME Studio

Multiboard Snap Removal Tool

Updated with hole for hanging. This tool helps removing Multiboard snap fit inserts. It consists of a medium thread with a handle that can be used to leverage the snap insert out.

Downloads
1,851
Likes
251
Rating
5
P
PrintablesNebulaNoob

Sans Amiibo Figure

I lost the files for my original Sans figure so I thought "might as well do it all again" No special print instructions, I'd print it around 3 inches but aside from that go nuts. Will update with photos when done painting All my figurine…

Downloads
1,806
Likes
121
Rating
4.8
P
PrintablesHexiBase

HexiBox Series: A25 Micro

As seen on X and YouTube: Designed for use with the Tang Band W3-1876 woofer, and the GRS A25-2T tweeter. Usable overall bandwidth of 50Hz - 16kHz in the nearfield; ideally against a wall. Tang Band W3-1876S 3" Subwoofer:…

Downloads
1,769
Likes
594
Rating
5
P
PrintablesFrancs

Multiboard Tape Measure holder

There are 3 models with different attachment types for the Multiboard. It can be used for tape measures and safety glasses. The snap need to be printed with supports. There is also now a thicker version for heavier tape measures Credit to…

Downloads
1,729
Likes
148
Rating
4.85
P
PrintablesDavid D

Multiboard bin system v2

Every multiboard needs to have some bins to put stuff in. Need any useable size you can just attach end easily remove, use the multiboard bin system. Note: This is version 2 of my multiboard bin system . Differences from the first version…

Downloads
1,725
Likes
187
Rating
5
P
PrintablesBobMcGlobus

Cable tie - powerstrip holder for Multiboard ("Underware" cable management system by HandsOnKatie)

Click connector plate for attaching power supply units or power strips to Multiboard with cable ties. (Matching the “Underware” cable management system from HandsOnKatie.)

Downloads
1,699
Likes
329
Rating
4.33
P
Printableslarsn

Headphone Holder for Multiboard

Simple headphone holder for Multiboard. Needs a large thread screw to mount.

Downloads
1,649
Likes
211
Rating
4.86
P
PrintablesPatrik

Multiboard bottle holders with open bottom in various sizes

Multiboard bottle holders with open bottom in sizes from 25mm to 120mm. The bottle holders uses the flexible MultiConnect connector. Just attach MultiConnect connectors to your board and then mount the bottle holder on these connection…

Downloads
1,645
Likes
337
Rating
5
P
PrintablesBalu

Multiboard Flush Snap Pusher

Since the new Flush Snaps are a little flimsy, it can be difficult to push them into their Multiboard counter parts - especially if you chose the tighter versions. So I made this little tool to help with that. Print settings I print these…

Downloads
1,609
Likes
152
Rating
5
P
PrintablesHexiBase

HexiBox Series: Tang Band W5-1138SMF / Dayton Audio DMA80-8 2.1 Backpack Speaker

As seen on X and YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.

Downloads
1,576
Likes
244
Rating
0
P
PrintablesHexiBase

HexiBox Series: Tang Band W3-1876S MicroSub

As seen on YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.

Downloads
1,568
Likes
191
Rating
4.83
P
PrintablesReelClones

Multiboard Ultimate Screwdriver Holder!

The ultimate screwdriver holder for #Multiboard! Holds 12 screwdrivers in the main holders, plus has slotted holes for inserting extra smaller screwdrivers, and a front rail for tweezers, pliers etc. I don't have much horizontal space so…

Downloads
1,522
Likes
139
Rating
5
P
Printablesresimkulubu

Creality K1 / K1C Unibody Riser Remix

Umarım beğenirsiniz, yorumlarınızı ve silinenlerinizi paylaşmayı unutmayın lütfen :)

Downloads
1,521
Likes
199
Rating
3
P
Printablesmaksen

The Tilable Tiltbox for Multiboard

The Tilable Tilt Box , a practical and compact storage solution designed to attach seamlessly to Multiboard system . This box is perfect for organizing and storing small components, keeping your workspace tidy and efficient. NEW: The new…

Downloads
1,498
Likes
589
Rating
5
P
PrintablesKirklind

Multiboard Quick-Change Paper Towel Holder

A remix of DanPDK Quick-change Paper Towel Wall Mount holder allowing for it to mount to multiboard walls Requires M3x20mm bolts X2 as hinges for the flap

Downloads
1,498
Likes
239
Rating
4.96
P
Printablesbarad

Multiboard Voroni Battery Holder (AA+AAA)

A Voroni AA and AAA battery dispenser modified to mount to Multiboard. You'll need to add a Drop-In Nut Snap and two M4 screws to connect to the board.

Downloads
1,488
Likes
150
Rating
4.45
P
PrintablesPowerplay

Tchibo Esperto Pro Brüheinheit Zahnräder.

Gibt hier nicht viel zu sagen. Das sind die Zahnräder von der Tchibo Esperto Pro Brüheinheit. Drucker Bambu Lab X1C 0,2mm Layerhöhe 0,4mm Düse Material PETG Stützen “JA” Wenn ihr das gedruckt habt dann würde ich mich über eine Bewertung…

Downloads
1,477
Likes
38
Rating
5
P
PrintablesTellervo

Tweezer holder - Multiboard

Made sides wider, stronger and with angles to easily slide on the tweezers. Also, it prints horizontally and has an easy grab to remove it. To attach to a multiboard, either push it into one of the tile connectors like I did or use one of…

Downloads
1,464
Likes
193
Rating
5
P
PrintablesChris3DPrints

Deburring Tool Holder for Multiboard

Just printed out and hung my Multiboard. I found this really nice Deburring Tool Holder from Brad @FTBT 3D but it was for the HSW so I made a version like it in OnShape but with a peg that fits the Snap Connector on the Multiboard. I have…

Downloads
1,444
Likes
263
Rating
4.77
P
PrintablesNerlin

70mm, 72mm, 75mm, 82mm, and Windex 23oz Bottle Holders for the Multiboard Storage System

For the Multiboard Storage System. Standard Multiboard printer settings work, no supports needed. https://www.multiboard.io/ Added a holder for 75mm bottles. Added new versions of all the bottle holes with a Bolt Hole for the Large…

Downloads
1,427
Likes
243
Rating
5
P
Printablestlisek

Removable Multiboard Allen Key / Hex Wrench Holder

A simple allen key holder for multiboard . Sizes: 10, 8, 6, 5, 4, 3, 2.5, 2, 1.5 mm. Comes in two versions: with engraved (debossed) and embossed text Attaches using anti-rotate multiconnect so you can quickly remove it from the…

Downloads
1,411
Likes
182
Rating
4.93
P
PrintablesHands on Katie

Scissors Holder for Multiboard

Click in a scissors holder to your Multiboard wall. Easily pull the holder out to move it to a different location. Works with lots of different sizes or scissors! Requires a Multiboard Snap to click into:…

Downloads
1,387
Likes
209
Rating
4.94
P
PrintablesWithTheFlow

Multiboard Snap Mount Caliper Holder

A remix of the Multiboard Push-Fit Caliper holder to directly use the official multiboard remix snap fitting. I found the push fitting to be too loose for my preferences. By using the snap fitting directly, the caliper holder is solidly…

Downloads
1,381
Likes
136
Rating
4.92
P
PrintablesJace1969

Noob Saibot Mortal Kombat Mask Mk3

I've encoperated most of the face into the mask which I think gives it a much meaner appearence. Still it is an untested print and sizing and fitting correctly may be a whole different thing. Print instructions Category: 3D Printing

Downloads
1,344
Likes
238
Rating
5
P
PrintablesDavid D

Multiboard raw 6x3 shelve

Just a very simple shelve with a size of 6x3 of the multiboard grid (15cm x 7,5cm). How to use: You will need at least one multiboard connector for each edge of the shelve, but may use as many as you like. Connect those to the multiboard,…

Downloads
1,344
Likes
249
Rating
5
P
Printablesforsaken_candy

Multiboard/HSW tape measure mount (for any tool with a belt clip)

Multiboard and Honeycomb Storage Wall holder for tape measures with a belt clip. Print upright without supports. Updates 23 Apr 2023: Added version B with unneeded material removed. Just choose whichever looks better to you. 03 May 2025:…

Downloads
1,331
Likes
199
Rating
4.95
P
Printablesmmuellerphoto

Multiboard - Drilling Guide

With the build of my first Multiboard I was tired of "Draw - Deinstall - Drill - Install - Screw - Draw - Deinstall - Drill - Install - Screw - Draw - Deinstall - Drill - Install - Screw - Draw - Deinstall - Drill ..." And the holes 90%…

Downloads
1,294
Likes
287
Rating
4.57
P
Printablescdh

Multiboard Tape Holders

Want tape holders that are easier to print and stay put? These use the t-bolt multiboard screws as a base and extend them out 75mm or 100mm to hold rolls of tape. They're nicely secure and don 't droop.

Downloads
1,278
Likes
145
Rating
5