Search results: idf

Sort order

17,703 models

P
PrintablesMatthew

Modern Gridfinity Case

This is my design for a case for holding Gridfinity bins. My design goals included: Clean design No Hardware Able to stand on ends and back Contents stay in place Easy to open and securely close Stackable Designed for 3D printing While I…

Print approx. €0.12–€0.14 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
20,445
Likes
12,180
Rating
4.9
P
PrintablesLayerLux3D

Amazing Gridfinity M3 Bolt Sorter

This amazing automatic M3 bolt sorter is designed for the specific bolts you can see in the picture. I don't know how it works with other M3 bolts, but feel free to try. :) Be aware that if you use m3Sorter_bottom_gridfinity.stl you also…

Print approx. €5.32–€6.50 excl. taxPreliminary estimate for one variant

Downloads
16,861
Likes
6,535
Rating
4.82
P
PrintablesGlennovitS 3D

Gridfinity Baseplate (Quick print, lite version, less filament)

Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…

Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant

Downloads
10,098
Likes
1,129
Rating
4.96
P
PrintablesJerrari

GEN2 Gridfinity Drawers - STANDARD (LEGACY)

Two modular storage systems combined! GEN2 Modular Storage System is a modular rail system for mounting storage units under Lack enclosures and tables. Gridfinity by Zack Fre edman is an incredibly customizable storage solution that uses…

Print approx. €6.77–€8.27 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
5,722
Likes
3,104
Rating
4.93
P
PrintablesAquaMorph

Gridfinity Deburring Tool

Part List Part Quantity Link 6x2mm 4 Amazon This is a gridfinity holder for a Deburring Tool, a Pointed Tiles Cutter Pen, and 15 extra blades. Mine was made by YUFUTOL but it seems like a generic designed with other brands on the design…

Print approx. €3.30–€4.03 excl. taxPreliminary estimate for one variant

Downloads
1,919
Likes
292
Rating
4.9
P
Printableshoco

Gridfinity Caliper Stand

This 1x2 gridfinity module holds a digital caliper horizontally. It is stable even without a baseplate. This model prints without supports, but I recommend watching the first layer go down to ensure the circles around the magnets all…

Print approx. €2.18–€2.67 excl. taxPreliminary estimate for one variant

Downloads
1,558
Likes
404
Rating
4.93
P
PrintablesBram

Xiaomi Wowstick 1F+ #Gridfinity holder

Design description This is a gridfinity holder for the Xiaomi Wowstick 1F+ (plus) and its 56 bits. Also holds the base and (de)magnetizer. May also be compatible with the 1F Pro, not sure what the differences are. Based on ZachFreedmans…

Print approx. €9.65–€11.80 excl. taxPreliminary estimate for one variant

Downloads
1,475
Likes
293
Rating
4.92
P
Printablespejvl2000

Screws labels for Gridfinity Bin

Screws labels with pictures of DIN912 screws

Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant

Downloads
1,201
Likes
440
Rating
5
P
PrintablesdePrintinator

Gridfinity : Parametric Bottle with Knurled/Fluted Cap

I've created a parametric bottle with a knurled or fluted cap that scales up as large as desired for the Gridfinity system. I've included STLs for some basic sizes, and my Fusion360 Archive file so you can generate your own. I like the…

Print approx. €1.81–€2.22 excl. taxPreliminary estimate for one variant

Downloads
1,107
Likes
262
Rating
4.94
P
PrintablesAnia Kompa

Gridfinity X Cantilever Sbox - Storage Bin Case Organizer

This is a mashup of two very cool systems. Additional Materials: 6 pcs - M3 x 6 mm bolts (or M3 x 4mm) 6 pcs - M3 x 8 mm bolts 14 pcs - 3 mm x 35 mm rod 2 pcs - 3 mm x 32 mm rod (for the bottom of the front latches 2 pcs - 3 mm x 25 mm rod

Print approx. €0.35–€0.43 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
916
Likes
655
Rating
4.86
P
Printablesargoroots

Gridfinity base for Systainer 3

Gridfinity base grid for Festool Systainer 3 toolbox. Print 4 pieces and glue together or just in one piece if you have a large printer.

Print approx. €3.39–€4.14 excl. taxPreliminary estimate for one variant

Downloads
901
Likes
145
Rating
5
P
PrintablesFakeSpenny

Gridfinity Razor Blade Disposal Box w Lid

Box - Doesn't need supports but I've noticed the screw/magnet holes are not super clean. If this bothers you add some support material there. Lid - Print with the 'Blade" text side down. Should snap closed, might have to clean corners for…

Print approx. €4.06–€4.96 excl. taxPreliminary estimate for one variant

Downloads
882
Likes
128
Rating
4.87
P
Printables_cybermouse_

Gridfinity Rotary Tool Bits and Pieces Storage

I designed this simple storage unit for my rotary tool bits based on the Gridfinity system by Zack Freedman.

Print approx. €9.71–€11.87 excl. taxPreliminary estimate for one variant

Downloads
693
Likes
162
Rating
5
P
PrintablesSweet1227

Gridfinity Pinecil CNC Kitchen holder organizer

Built an “all in one” for my Pinecil soldering iron, CNC Kitchen adaptors, and accessories. I used the Fusion 360 GridfinityGenerator plugin by Lev Mishin for the base model - great resource!…

Print approx. €8.72–€10.66 excl. taxPreliminary estimate for one variant

Downloads
644
Likes
132
Rating
5
P
Printablesfhessel

Gridfinity Generic DevBoard Holder

This holder allows to store development boards with pins mounted on the bottom in Zack Freedman's Gridfinity system . As such boards come in various sizes (e.g. different ESP8266 or ESP32 boards, Raspberry Pi Pico, Arduino Nano, …), the…

Print approx. €4.76–€5.81 excl. taxPreliminary estimate for one variant

Downloads
568
Likes
122
Rating
4.88
P
PrintablesKevin Barker

Gridfinity Bin for Prusa Nextruder Nozzles

There are lots of Nextruder bin designs for Zach Freedman's Gridfinity system, but none of them worked for my needs. So I made this one from scratch. If you are unfamiliar with the Gridfinity system, watch Zach's original video below.…

Print approx. €4.77–€5.83 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
567
Likes
146
Rating
5
P
PrintablesTs3dprints

Gridfinity Fatmax Tape Measure Holder

Summery This is a Gridfinity tray to hold a tape measure. it works with a stanley 25' fatmax, and standard stanley 25'. History Gridfinity is the ultimate organizer for your whole workshop! Learn more at Find more Gridfinity accessories…

Print approx. €1.62–€1.99 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
511
Likes
46
Rating
5
P
PrintablesPatrik

Gridfinity bins for CR2032 batteries

Gridfinity battery bins for CR2032-batteries. The bins can be stacked. Included bins: A 1x1x4 bin that fits 8 batteries. A 1x2x4 bin that fits 16 batteries. The base box is generated with the Fusion 360 GridfinityGenerator,…

Print approx. €0.84–€1.03 excl. taxPreliminary estimate for one variant

Downloads
471
Likes
44
Rating
5
P
Printableswizhack

Gridfinity Stripper pliers rack fit for drawers

This is my remixed version of Zack Freedman's gridifinity stripper holder rack which allows you to store pliers on the edge while closing a drawer, depends on your pliers size (tested on ikéa alex). 3 versions of this rack : 1x3u = 120 mm…

Print approx. €2.57–€3.14 excl. taxPreliminary estimate for one variant

Downloads
468
Likes
63
Rating
4.82
P
PrintablesAaronOaks

Gridfinity Dymo 160 Tape Holder

Holder for Dymo LabelManager 160 label tape, compatible with the popular Gridfinity organization system. More details on the Gridfinity system:

Print approx. €6.22–€7.60 excl. taxPreliminary estimate for one variant

Downloads
458
Likes
68
Rating
4.94
P
PrintablesRae

Gridfinity AAA battery storage

This model uses the Gridfinity plugin to Fusion 360. The modeling is fairly basic after that, a negative extrude with an edge fillet. This then uses the rectangular pattern feature to build out the rest of the slots for the batteries.

Print approx. €1.59–€1.94 excl. taxPreliminary estimate for one variant

Downloads
409
Likes
33
Rating
4.8
P
PrintablesDaniel Vitanza

1x1 Gridfinity Dremel Accesories Holder

1. Introduction Dremel accesories holder for gridfinity......optimised to get a lot of accesories by 1x1 grid and with ease of use. 2. Revision History Version Description Date A.1 Initial Release 25/06/2024 A.2 Add more variants. Change…

Print approx. €0.84–€1.03 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
372
Likes
63
Rating
5
P
PrintablesKeldor

Gridfinity 2x4x6 Hex Bin

A single Hex bin with 2 x 4 Gridfinity and 6mm hight. The base is created with the gridfinity fusion 360 plugin from https://github.com/Le0Michine/FusionGridfinityGenerator Look at my other HexBin's here:…

Print approx. €3.92–€4.79 excl. taxPreliminary estimate for one variant

Downloads
365
Likes
61
Rating
5
P
PrintablesMrNerdHair

Parametric Gridfinity AirPods Pro 1x1 box

I loved the idea behind cmsj's 45-degree AirPods Pro holder, but I wanted to print a model that was a bit more precise. I pulled dimensions from Xials' extremely precise CAD model of the device to make a custom-fit version using…

Print approx. €0.74–€0.90 excl. taxPreliminary estimate for one variant

Downloads
340
Likes
27
Rating
4.78
P

Dremel bits holders to use with the Gridfinity system

Printed with no support and 25% infill.

Print approx. €4.99–€6.10 excl. taxPreliminary estimate for one variant

Downloads
328
Likes
58
Rating
5
P
PrintablesKevin Barker

100° Modified Hinges for Modern Gridfinity Case

Matthew's Modern Gridfinity Case design is fantastic, but I find that it takes up a lot of desk space when hinged fully open. This simple mod replaces the hinge pieces with new ones that limit the travel to approximately 100 degrees. I…

Print approx. €0.75–€0.91 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
327
Likes
97
Rating
4.78
P
PrintablesPatrik

Gridfinity bins for CR2450 batteries

Gridfinity battery bins for CR2450-batteries. The bins can be stacked. Included bins: A 1x1x4 bin that fits 5 batteries. A 1x2x4 bin that fits 10 batteries. The base box is generated with the Fusion 360 GridfinityGenerator,…

Print approx. €0.83–€1.01 excl. taxPreliminary estimate for one variant

Downloads
321
Likes
21
Rating
5
P
Printablessyrovatskey

2x1 Gridfinity Rugged Box

You can use any of represented materials as you would like, free of charge. Вы можете использовать любые представленные материалы как вам хочется, бесплатно. I printed it with these settings / Я печатал модель со следующими настройками:…

Print approx. €2.16–€2.64 excl. taxPreliminary estimate for one variant

Downloads
275
Likes
58
Rating
5
P
PrintablesChris D

Gridfinity Bin for Gallon Ziploc Bags

Gridfinity Bin for gallon size ziploc baggies (3x7x7). Use 6mm x 2mm magnets to hold halves together and lid on. Requires 6 to hold halves together and has spots for 28 to hold lid on, but only takes 12 to hold firmly. Print lids face…

Print approx. €4.27–€5.22 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
272
Likes
21
Rating
0
P
Printablesedward8e

Gridfinity 2x2x3 4mm hex bit holder

Exciting Update to Our Hex Bit Holder Design! In response to the community's feedback and my desire to enhance functionality, I've rolled out significant updates to our beloved hex bit holder. Here's what's new: Increased Capacity:…

Print approx. €7.58–€9.26 excl. taxPreliminary estimate for one variant

Downloads
268
Likes
21
Rating
0
P
Printablesrh25170

Improved Gridfinity Dovetails

This is a redesign of the dovetail connectors from ‘Gridfinity Master Collection.’ Based on the file name, and the owner of the collection, I believe credit is due to GlitchPrinter for the original idea here. These are slightly smaller…

Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant

Downloads
258
Likes
29
Rating
5
P
PrintablesStuggi

Gridfinity Nippers Pliers Strippers Rack 2x2

A rack that fits a set of thin Knipex electronics pliers and 3 Knipex comfort grip small pliers. Prints without supports.

Print approx. €3.48–€4.25 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
244
Likes
33
Rating
5
P

Gridfinity Pen Holder (5x 12mm Holes) For Pilot G2

A 1x1 Gridfinity pen holder for 5x pens up to 12mm in diameter. Pen holder now fits Pilot G2 pens.

Print approx. €1.29–€1.57 excl. taxPreliminary estimate for one variant

Downloads
238
Likes
31
Rating
5
P
PrintablesKeldor

Gridfinity 2x2x6 Hex Bin

A single Hex bin with 2x2 Gridfinity and 6mm hight. The base is created with the gridfinity fusion 360 plugin from https://github.com/Le0Michine/FusionGridfinityGenerator Look at my other HexBin's here:…

Print approx. €1.97–€2.40 excl. taxPreliminary estimate for one variant

Downloads
230
Likes
38
Rating
0
P
PrintablesRae

Gridfinity superglue holder

Superglue tubes are annoying as they quickly go solid. They can last longer if stored upright with the cap on tight. Since the bases don't lend themselves to being easily stored upright I used the gridfinity plugin for Fusion 360 to make…

Print approx. €2.24–€2.74 excl. taxPreliminary estimate for one variant

Downloads
218
Likes
23
Rating
5
P
PrintablesKeldor

Gridfinity 4x4x6 HexBin

A single Hex bin with 4 x 4 Gridfinity and 6mm hight. The base is created with the gridfinity fusion 360 plugin from https://github.com/Le0Michine/FusionGridfinityGenerator Requested by @CG485_1311834 Look at my other HexBin's here:…

Print approx. €6.35–€7.76 excl. taxPreliminary estimate for one variant

Downloads
218
Likes
53
Rating
0
P
Printablescryptomilk

CORE ONE Tools Gridfinity Bin

This is just a simple gridfinity bin for the CORE One Tools. There are two versions available.

Print approx. €2.65–€3.24 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
216
Likes
79
Rating
4.5
P
PrintablesPatrik

Gridfinity bins for 10 * ER14250 (0.5AA) batteries + bins for LR41 & LR44

Stackable Gridfinity bins, one 1x2x5 for storing 10 * LR14250 batteries, one 1x1x2 for storing 16 LR41 and one 1x1x2 for storing 10 LR44. The base box is generated with the Fusion 360 GridfinityGenerator,…

Print approx. €0.51–€0.63 excl. taxPreliminary estimate for one variant

Downloads
214
Likes
13
Rating
5
P
PrintablesPatrik

Gridfinity CD / DVD bins

Gridifinity bind for CD or DVDs. The bins can be stacked. Included bins: Bin for 1 CD/DVD - size 3x3x1 (126x126x7 mm) Bin for 6 CDs/DVDs - size 3x3x2 (126x126x14 mm) Bin for 12 CDs/DVDs - size 3x3x3 (126x126x21 mm) Bin for 18 CDs/DVDs -…

Print approx. €1.48–€1.81 excl. taxPreliminary estimate for one variant

Downloads
214
Likes
37
Rating
5
P
PrintablesDusBus

Gridfinity - 5x4 - Holder for 18 pens

Gridfinity 5x4 Pen Holder, a sleek and efficient solution for organizing and displaying your collection of 18 pens. Contains magnet holes and can be stacked.

Print approx. €13.63–€16.65 excl. taxPreliminary estimate for one variant

Downloads
210
Likes
30
Rating
0
P
PrintablesJoe

Gridfinity Refined Hammer Holding set (misc hammers), modular

These hammer pieces are for holding various hammers that i have. hopefully the sizes fit for you. they are modular. I use these flat bins to fill in the voids. Individual I have 4 hammers - - 2.5lb ESTWING sledge - 2-1/2" rubber mallet…

Print approx. €13.19–€16.13 excl. taxPreliminary estimate for one variant

Downloads
209
Likes
26
Rating
5
P
PrintablesMadestCat

Gridfinity iFixit Kit holder

A Gridfinity tool holder for an iFixit Kit.

Print approx. €3.66–€4.47 excl. taxPreliminary estimate for one variant

Downloads
207
Likes
46
Rating
5
P
PrintablesPatrik

Gridfinity D / R20 / LR20 battery bins

Gridfinity battery bins for D-/R20-batteries. The bins can be stacked by using the included spacers. A 1x2x4 bin that fits 2 batteries. A 2x2x4 bin that fits 4 batteries. A 1x2x6 spacer that is needed to stack the 2-battery bins. A 2x2x6…

Print approx. €0.75–€0.92 excl. taxPreliminary estimate for one variant

Downloads
186
Likes
16
Rating
5
P
PrintablesPatrik

Gridfinity C / R14 / LR14 battery bin and spacer

Gridfinity battery bin for C-/R14-batteries. The bin can be stacked by using the included spacer. A 1x3x4 bin that fits 4 batteries. A 1x3x4 spacer that is needed to stack the battery bins. NOTE: The spacers are best printed upside down…

Print approx. €0.65–€0.80 excl. taxPreliminary estimate for one variant

Downloads
183
Likes
11
Rating
5
P
PrintablesPatrik

Gridfinity bin for AA and/or C batteries

A compact stackable Gridfinity 2x2x9 with two partitions, each partition fits 20 AA batteries or 6 C batteries. It is not ideal for C batteries as the batteries can be hard get when the partition is full. The base box is generated with…

Print approx. €4.57–€5.59 excl. taxPreliminary estimate for one variant

Downloads
178
Likes
21
Rating
0
P
PrintablesChris D

Gridfinity Bin for Quart Ziploc Bags

Gridfinity Bin for quart size ziploc baggies (2x6x7). Use 6mm x 2mm magnets to hold halves together and lid on. Requires 6 to hold halves together and has spots for 24 to hold lid on, but only takes 8 to hold firmly. Print lids face down…

Print approx. €2.65–€3.24 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
170
Likes
29
Rating
4
P
PrintablesKeldor

Gridfinity 2x3x6 Hex Bin

A single Hex bin with 2x3 Gridfinity and 6mm hight. The base is created with the gridfinity fusion 360 plugin from https://github.com/Le0Michine/FusionGridfinityGenerator Look at my other HexBin's here:…

Print approx. €3.25–€3.97 excl. taxPreliminary estimate for one variant

Downloads
165
Likes
36
Rating
0
P
PrintablesChris D

Gridfinity - Tweezer Holder

Gridfinity - Tweezer Holder - 3x1x4 Simple tweezer holder that fits two pair. Note: Color change is at layer 28.2.

Print approx. €2.14–€2.61 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
159
Likes
25
Rating
5
P

Gridfinity Moleskine Notebook Holder

Simple gridfinity holder for two notebooks. Requires 5x1 squares on the gridfinity base. Perfectly fits a large (5 x 8.25") Moleskine notebook. A Maker's Notebook will hang off the edge, as shown. Use only as directed--gridfinity storage…

Print approx. €7.65–€9.35 excl. taxPreliminary estimate for one variant

Downloads
146
Likes
33
Rating
5
P
Printables_KaszpiR_

Gridfinity base for ANENG AN8008 and AN8009 or similar

About Remix of Aneng Multimeter stand, added 2x2 gridfinity base with magnets and a box on the back to keep probes in it add magnets and it will be even more stable added version with more ‘flat’ angle for better reading the screen,…

Print approx. €3.54–€4.33 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
143
Likes
22
Rating
5
P
PrintablesMadestCat

IKEA Trofast Baseplates for Gridfinity - Smaller Size

Changes I changed the overall width and length by 2 mm (1 mm each side) which makes it fit a lot better. I also removed a few mistakes that were made by adding the area around the original baseplate. And to make it even easier to screw…

Print approx. €13.62–€16.64 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
142
Likes
20
Rating
0
P
Printablestoe4

Gridfinity Australian Coin Organiser

Based on @FilipKolinsky_352287 's parametric f360 gridfinity template. https://www.printables.com/model/286722-gridfinity-block-template-easy-to-use-for-fusion-3 It has magnet holes, but with the .f3d file you can remove them, or add…

Print approx. €10.40–€12.71 excl. taxPreliminary estimate for one variant

Downloads
140
Likes
12
Rating
5
P
Printableskevsparky

Gridfinity Baseplate Tape Cutting Stencil

This cutting stencil allows you to cut 5mm strips of double sided tape, that can be stuck to the underside of Gridfinity Baseplates, so they can be stuck rigidly inside a drawer.

Print approx. €1.16–€1.41 excl. taxPreliminary estimate for one variant

Downloads
139
Likes
69
Rating
4.67
P
PrintablesAbílio Costa

Gridfinity Alex drawer tray grid (economic variant)

Since the Alex drawers do not open fully, it is hard to reach the bins on the back of the drawers. This tray allows you to quickly remove bins on the front of the drawer, making it possible to slide the ones on the back to access them!…

Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant

Downloads
137
Likes
40
Rating
5
P
PrintablesKeldor

Gridfinity 1x2x4.5 Hex Bin

A single Hex bin with 2 x 4 Gridfinity and 4.5mm hight. The base is created with the gridfinity fusion 360 plugin from https://github.com/Le0Michine/FusionGridfinityGenerator Look at my other HexBin's here:…

Print approx. €1.12–€1.36 excl. taxPreliminary estimate for one variant

Downloads
135
Likes
32
Rating
4
P
PrintablesKatasan

Gridfinity Brother P-Touch P300 Cube label printer holder

Uses the Gridfinity storage solution to hold the Brother P-touch cube label printer. Allows the printer to print while still in the box (using battery as the power port is covered). A nice height to fit into the bottom drawers of an Ikea…

Print approx. €6.99–€8.54 excl. taxPreliminary estimate for one variant

Downloads
132
Likes
18
Rating
5
P
PrintablesDusBus

Gridfinity - 5x2 - Holder for Bosch Gluey + spare glue sticks

Organize your crafting essentials with the Gridfinity 5x2 Holder, specially designed for Bosch Gluey and spare glue sticks. This holder provides a neat and accessible storage solution, ensuring your glue gun and extra supplies are always…

Print approx. €10.22–€12.49 excl. taxPreliminary estimate for one variant

Downloads
130
Likes
23
Rating
5
P
PrintablesTache

Gridfinity Ryobi Multi-Bit Case Holder

This holder organizes, but still keeps the original case. It was made to allowing opening without pulling the whole case out of the holder.

Print approx. €9.86–€12.05 excl. taxPreliminary estimate for one variant

Downloads
129
Likes
44
Rating
0
P
Printablesdrewiller

Gridfinity Craftsman 1/4" and 3/8" Ratchet Holder

Ratchet holder for both 1/4" and 3/8" craftsman ratchets and a spot for a 1/4" bit to ratchet adapter. Fits on the standard gridfinity system. 5x3 cubes.

Print approx. €5.37–€6.57 excl. taxPreliminary estimate for one variant

Downloads
125
Likes
21
Rating
0
P
Printablesplabs.cz

Gridfinity bin for MK4S nozzle replacement tool (silicone sock/no silicone sock)

I prepared two file variants. A version without a silicone sock and a version with. There is no difference in size, only text labels are added as modifiers directly in the PrusaSlicer. Feel free to change it as you need.

Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant

Downloads
123
Likes
22
Rating
5
P
PrintablesPatrik

Gridfinity Filament Sample Bins & Sample Card

Stackable Gridfinity bins and a template filament sample card. Sample Bins The Gridfinity sample bins are stackable for easy storage in drawers. 1x2x6 bin that fits 10 filament sample cards. 2x2x6 bin that fits 21 filament sample cards.…

Print approx. €0.19–€0.24 excl. taxPreliminary estimate for one variant

Downloads
118
Likes
25
Rating
5

gridfinity bin socket torx holder

Gridfinity bin socket torx key holder Supports torx keys size TX45, TX40, TX30, TX25 and TX20 The torx key including socket is 126mm (4 15/16") long and the socket ⌀ is ~17.5mm (11/16"). Used with 3/8" drive ratchet. The socket holder…

Print approx. €5.31–€6.49 excl. taxPreliminary estimate for one variant

Downloads
115
Likes
10
Rating
0
P
PrintablesVagrantMugen

Glue Stick Gridfinity Stand

I included a 1 and 3 stick stand. I was putting “Elmers Washable School Glue Sticks" in the stands. They are 22g and about 27mm in diameter. I made the holes 29.5 for fitting and ease of removal and insertion. I printed mine at .28 with 1…

Print approx. €0.78–€0.95 excl. taxPreliminary estimate for one variant

Downloads
114
Likes
6
Rating
0
P
PrintablesStuggi

Gridfinity 1x1 Flux Syringe Holder

Prints very well in PETG with 10% gyroid infill and 3 outer layers.

Print approx. €1.86–€2.28 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
112
Likes
8
Rating
5
P
PrintablesTurbopstros

Gridfinity Bin for Parkside PFBSA 4 A1 Rotary Tool

Custom Cutout Gridfinity Bin for Parkside PFBSA 4 A1 Cordless Rotary Tool (from Lidl) Bin is 5 x 2 units - doesn't fit the Mini printer, so I prepared also the split version with dovetail joint to fit the Mini printer. ℹ 1 split part (for…

Print approx. €3.96–€4.84 excl. taxPreliminary estimate for one variant

Downloads
111
Likes
48
Rating
5
P
Printablesfluetke

Gridfinity cradle for Dymo LetraTag 200B Labelprinter

Gridfinity storage for a Dymo LetraTag 200B Bluetooth Label printer. Size: 3x3x2.

Print approx. €4.82–€5.89 excl. taxPreliminary estimate for one variant

Downloads
109
Likes
15
Rating
5
P
PrintablesOkojo

Gridfinity Mk4 Nozzle Tools Holder

The Nextruder Nozzle Wrench and Nextruder Heater Block Clamp are the most important combination of tools IMHO if you intend to regularly swap nozzles on your Mk4. So, I made this 1x2x4 gridfinity bin to keep them close by your printer.…

Print approx. €1.55–€1.90 excl. taxPreliminary estimate for one variant

Downloads
102
Likes
24
Rating
5
P
PrintablesBen

GEN2 Decor - Gridfinity Drawers with half grid (25% more storage) - STANDARD

The Gen2 system (by Jerrari ) combined with Gridfinity is a flexible storage system. Why waste space when you can use it. So I added an extra column Gridfinity Half Grid (by HuMa ) to the empty space. The Gridfinity bins can have a height…

Print approx. €4.36–€5.32 excl. taxPreliminary estimate for one variant

Downloads
101
Likes
32
Rating
0
P
PrintablesBram

OWIM Lidl Screwdriver & 30 bit set #Gridfinity holder

Design description This is a gridfinity holder for a cheap Lidl (shop) screwdriver and its 30 bits, created by OWIM. Only after printing I noticed I added a row too much to load bits. I can only find the renewed(?) model online: OWIM…

Print approx. €7.46–€9.12 excl. taxPreliminary estimate for one variant

Downloads
97
Likes
23
Rating
5
P
PrintablesVagrantMugen

Deburring Tool Gridfinity Stand

There are a couple of these out there, but I wanted one that had all the tool heads and the handle in this orientation. Its got magnet holes on the bottom and a chamfer on the top holes to aid insertion . The bin was made using the Fusion…

Print approx. €1.22–€1.49 excl. taxPreliminary estimate for one variant

Downloads
95
Likes
9
Rating
5
P
PrintablesChris D

Gridfinity - Gorilla Glue Holder

Gridfinity - Gorilla Glue Organizer 1x2x4 Gridfinity glue organizer. Holds super glue and normal gorilla glue bottles. Prints without supports. Color change at layer 28.2 for coloring in photo.

Print approx. €1.40–€1.71 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
94
Likes
11
Rating
5
P
Printables73pctGeek

Filament Infill Swatch for Gridfinity Bin

Swatch sized to a Gridfinity bin to keep track of various types of infill. Same size as my Filament Colour Swatches . Brother DK-11204 Multi Purpose Label template included in the files. Print Settings in the swatches shown: Vertical…

Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant

Downloads
93
Likes
24
Rating
5
P
PrintablesPatrik

Gridfinity bins for needle files

Gridfinity needle file bin for storing 3 needle files. Designed for the 6 piece needle file set sold by Prusa, but you need to print two bin for storing all 6 files. The base box is generated with the Fusion 360 GridfinityGenerator,…

Print approx. €1.70–€2.08 excl. taxPreliminary estimate for one variant

Downloads
90
Likes
14
Rating
5
P
Printablesdick

Gridfinity holder for Ring batteries

A container for Ring batteries, in the style of Definitive Collection of Battery Holders (Gridfinity, Stackable & Labelled) by xavierly (although this one is not stackable!) It holds two batteries in a 1x2 Gridfinity container. The base…

Print approx. €4.02–€4.91 excl. taxPreliminary estimate for one variant

Downloads
87
Likes
5
Rating
5
P
PrintablesJoe McCarthy

Raspberry Pi Gridfinity Holder

Wanted a place to store my Raspberry Pi 4s which are awaiting to be used in a project. I tend to keep my Raspberry Pi in cases, so designed a small Gridfinity holder to be able to hold 5 while they wait to be used. Holds 5 devices…

Print approx. €4.10–€5.02 excl. taxPreliminary estimate for one variant

Downloads
87
Likes
22
Rating
5
P
PrintablesTom Hofman

Gridfinity Desk Organizer System - Deskfinity - 1x3x6 Wallet Cards

A simple cut and merge of the original 2x2x6 Wallet Cards holder to fit a 1x3x6 space.

Print approx. €2.72–€3.32 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
84
Likes
10
Rating
5
P
PrintablesAaronOaks

Gridfinity PCIe Card Holder

PCIe card holder colder, compatible with the popular Gridfinity organization system. Fits 2 1-slot cards in a 1x3 grid space. Based on a 1x3x1 (x,y,z) generated Gridfinity base platform from https://gridfinity.bouwens.co/

Print approx. €1.58–€1.93 excl. taxPreliminary estimate for one variant

Downloads
82
Likes
7
Rating
5
P
PrintablesDusBus

Gridfinity - 1x8 - 4x ruler holder

A handy solution for your rulers. It's not fancy, just practical. Holds up to four rulers, max size 37.5cm*2.5mm. Be aware that it won't fit on your regular sized (MK3/MK4) print beds. I have included a pre-cut version with dowels. Needs…

Print approx. €8.88–€10.85 excl. taxPreliminary estimate for one variant

Downloads
78
Likes
9
Rating
4
P
Printablesbob digga

Gridfinity 1x1 Challenge Coin Stand 2-inch Coins Remix

Mashed it up in tinkercad. view here: https://www.tinkercad.com/things/2375ht4nFpD-gridfinity-1x1-challenge-coin-stand links to original models listed above. Printed 2 on a 1x3 Gridfinity baseplate, only to realize with the 50mm coins,…

Print approx. €0.81–€0.98 excl. taxPreliminary estimate for one variant

Downloads
76
Likes
11
Rating
0
P
PrintablesSzachu

Gridfinity base for 40x40 aluminum extrusion horizontal

Gridfinity base mount on 40x40 extrusion panel. Print in 45° angle and use default support.

Print approx. €0.75–€0.91 excl. taxPreliminary estimate for one variant

Downloads
63
Likes
35
Rating
0
P
PrintablesJon

Gridfinity Grocery Bag Holder 3x3x26

Design Requirements A simple gridfinity container that holds reusable grocery bags Printing Setup Printed with PETG using a .4 mm nozzle and no supports First Impressions The bags fit Attribution ZackFreedman - Gridfinity gdie - Freecad…

Print approx. €9.99–€12.21 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
60
Likes
14
Rating
0
P
PrintablesTobias

Wera 838 RA gridfinity holder

This gridfinity bin is designed to hold a Wera 838 RA bitholding screwdriver (tested with RA-R M variant, others versions should fit as well) in the least amount of space while being both easy liftable and stackable: 4x1 with 6 height…

Print approx. €2.46–€3.01 excl. taxPreliminary estimate for one variant

Downloads
58
Likes
8
Rating
5
P
Printablesfluetke

Gridfinity 2k Epoxy/JB-Weld storage

Stores 2k epoxy syringe + spatula for mixing + mixing area in front. Size is 5x1x4.

Print approx. €5.21–€6.37 excl. taxPreliminary estimate for one variant

Downloads
57
Likes
5
Rating
0
P
PrintablesMasterDisaster

Gridfinity for Dremel Versatip

Box for Dremel Versatip with accessories. I made some small changes after the first print, didn't print it after the changes. So if there some changes needed please tell me. (Fighting with fusion360 after every update they make) 12.11.25:…

Print approx. €12.59–€15.39 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
56
Likes
10
Rating
5
P
PrintablesDusBus

Gridfinity - 5x2 - Powerfix Profi+ Rotary cutter holder

This holder ensures secure and convenient storage for your rotary cutter, allowing quick access whenever creativity strikes. Contains magnet holes and can be stacked.

Print approx. €9.61–€11.74 excl. taxPreliminary estimate for one variant

Downloads
53
Likes
7
Rating
5
P
PrintablesKevin Barker

Gridfinity Bin for 7.2v Makita DF012D Screwdriver

This is a bin designed specifically to hold the 7.2v Makita DF012D power screwdriver for Zach Freedman's Gridfinity system. It may also fit the impact version (TD022D), but I don't have one available to verify. If you are unfamiliar with…

Print approx. €13.82–€16.90 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
52
Likes
17
Rating
0
P
PrintablesFraham

Dremel 2200 Gridfinity Stand

Remix of https://www.printables.com/model/484070-stand-holderorganiser-for-dremel-versaframe-2200-t to include a gridfinity base

Print approx. €3.29–€4.03 excl. taxPreliminary estimate for one variant

Downloads
52
Likes
9
Rating
5
P
PrintablesTache

Gridfinity 2x2 bin with 79 mm circle for random things

This is for those random things like the shown Black & Decker Bit Mini-Case. It is a 2 x 2 unit and has a height of 2 units.

Print approx. €2.27–€2.78 excl. taxPreliminary estimate for one variant

Downloads
49
Likes
4
Rating
0
P
PrintablesJimleeQ

Gridfinity 4x2 Breadboard holder with extras

My version of a breadboard holder for the amazing gridfinity system, as I wanted to use gridfinity to organise my whole electronics prototyping space. This bin has space for a 830-hole breadboard (JUST fits..), and a range of bits in a…

Print approx. €6.22–€7.61 excl. taxPreliminary estimate for one variant

Downloads
45
Likes
10
Rating
5
P
PrintablesDaddie0

IKEA NORDEN Drawer Gridfinity baseplate

This is a custom-designed lightweight Gridfinity baseplate optimized for the IKEA NORDEN table drawer. The set includes two baseplates per drawer, each featuring a 3x4 Gridfinity layout. These baseplates were built using the Autodesk…

Print approx. €0.75–€0.92 excl. taxPreliminary estimate for one variant

Downloads
45
Likes
8
Rating
0
P
PrintablesKeldor

Gridfinity 2x4x6mm BarBin

Tried to create a more robust design of a 2x4 gridfinity bin. If you need other sizes, let me know! The Bin is 2x4 Squares with a maximum hight about 6cm. The base is created with the gridfinity fusion 360 plugin from…

Print approx. €4.20–€5.14 excl. taxPreliminary estimate for one variant

Downloads
44
Likes
10
Rating
0
P
Printables3Dprintfun

Gridfinity X-Acto Knife Disposal

A while ago I designed an X-Acto knife disposal bin , but I wanted one that would fit in my gridfinity setup in my desk. So I designed this compact container that will protect you, and others, from old X-Acto knife blades. This model fits…

Print approx. €1.23–€1.50 excl. taxPreliminary estimate for one variant

Downloads
43
Likes
20
Rating
0
P
PrintablesAndrew

Gridfinity NEIKO Metric Hex Bit 13-Piece Socket Set

This Gridfinity tray is for this 13-Piece NEIKO 10074A Metric Hex Bit Socket Set .

Print approx. €2.30–€2.81 excl. taxPreliminary estimate for one variant

Downloads
40
Likes
9
Rating
5
P
PrintablesEzner

Leitz 5008 Hole Punch gridfinity bin

Straightforward gridfinity bin for a Leitz 5008 hole puncher. FreeCAD file available for remixing

Print approx. €5.68–€6.94 excl. taxPreliminary estimate for one variant

Downloads
39
Likes
6
Rating
5
P
Printablesgedeyenite

Gridfinity - Stacking DVD Tray 3x3x2 No Magnets

Holds 4-5 DVDs/CDs in each tray. Finger holes for easy extraction. Stackable. I don't retain too many DVDs these days, but this keeps them where I can find them when I need them. The DVDs fit snug enough that they shouldn't scratch each…

Print approx. €4.25–€5.20 excl. taxPreliminary estimate for one variant

Downloads
39
Likes
8
Rating
5
P
PrintablesTraincrossin

Gridfinity Tape Measurer and Tape Holder

Store all of your tape related things here! There's a spot for a tape measure and two half circles to hold tape or other circular things like an Oreo. Actually, fill up the tape measure bin with milk and dunk your Oreos, you could do that…

Print approx. €3.48–€4.25 excl. taxPreliminary estimate for one variant

Downloads
35
Likes
3
Rating
0
P
PrintablesQuesabyte

Wowstick Gluer - Gridfinity case

designed to use M3 20-22mm screws and heat inserts.

Print approx. €5.49–€6.71 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
34
Likes
8
Rating
5
P
PrintablesDusBus

Gridfinity - 1x1 - 2x Staedtler rasoplast erasor holder

Holds two 12,5mm x 18,5mm x 41mm erasors and can be stacked. Has magnet holes on the bottom.

Print approx. €1.66–€2.03 excl. taxPreliminary estimate for one variant

Downloads
34
Likes
2
Rating
0
P
PrintablesJeff Marsh

Gridfinity HSS Hex Bit Storage

A 3x4x4 gridfinity storage tray for eighteen Hex shanked HSS drill bits. Comprises of a tray and two, clip in, hinged, bit holders. The two bit holders are numbered to indicate drill bit diameters from 2mm to 10mm in 0.5mm steps. The tray…

Print approx. €1.45–€1.77 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
33
Likes
5
Rating
0
P
PrintablesKRENN DESIGN

Gridfinity Storage Box | Open Source

Gridfinity Storage Box A compact, modular Gridfinity storage solution designed to keep your batteries, screws, and components organized. Features a snap-fit latch mechanism to keep the lid locked, making it easy and secure to carry…

Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant

Downloads
31
Likes
8
Rating
0