Search results: ikea

Sort order

19,151 models

P
PrintablesJonasTae

IKEA Skadis Wall Mount

Screw: diameter: up to 6mm length: 30mm or more

Print approx. €0.49–€0.59 excl. taxPreliminary estimate for one variant

Downloads
12,456
Likes
3,013
Rating
4.96
P
Printableskev

IKEA 365+ Lid Holder / Deckelhalter - 10 Slots

Remix of version V2.1 by Simon with 10 instead of 5 slots. Fits square lids with a length of 15 cm or rectangular lids with a length of 21 cm (upright) Printed using PETG | 30% infill | no supports required

Print approx. €10.85–€13.26 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
9,068
Likes
3,316
Rating
4.97
P
Printablestimqui

Connectors - Brio/IKEA Wooden Train Track

Various connectors compatible with Brio, IKEA Lillabo (old plastic dogbone and current wooden-only version too), Thomas Train, Kaufland, LIDL Playtive, kmart, ebay,... wooden tracks. UPDATE: 30 mm male-male connector! Print instructions…

Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant

Downloads
5,738
Likes
799
Rating
4.93
P
PrintablesAndrás Bognár

Minimalist Duplo - Brio, IKEA, Wooden Train adapter

Minimalist Duplo - Brio, IKEA, Wooden Train adapter that you can use for connecting Duplo bricks with wooden train tracks to make bridges and slopes. The peg on the outside is modified a bit so it fits on a Duplo brick too. Print with…

Print approx. €0.85–€1.04 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
5,575
Likes
696
Rating
4.96
P
Printablesrclauss

Brio/Ikea Elevated Train Track Set

This set includes two ramps and a trestle style support for building elevated tracks. The ramps are a bit too steep so most trains with scrape a bit when going up or down. But I wanted to make the ramps tall enough that trains could fit…

Print approx. €4.76–€5.82 excl. taxPreliminary estimate for one variant

Downloads
2,798
Likes
496
Rating
4.53
P
Printables3D-Print Brehm

IKEA 365+ Box 10,6 Liter - Filament Dry Box mit 2x Silica Zylinder (für PRUSAMENT 2 Rollen) mit digital Hygrometer

Hallo zusammen, hier mal wieder einige Optimierungen für meine 3D-Druckwerkstatt, die ich euch gerne zum Nachdruck übergeben möchte. Um die Druckqualität zu erhöhen, habe ich mir dann doch mal einen Drybox gebaut und verschiedene Entwürfe…

Print approx. €2.59–€3.17 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
2,360
Likes
399
Rating
4.33
P
PrintablesDaHouzKat

IKEA SKADIS Wall Mount

I like things that are not permanent, easy to install or remove so i created my own Screwless IKEA SKADIS Wall Mount using 3M Command Large Picture Hanging Strips What you need IKEA SKADIS Board or 3D Printed SKADIS Board 3M Command Large…

Print approx. €2.53–€3.09 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
2,208
Likes
415
Rating
5
P
PrintablesTechNerd

Toy Train BRIO / IKEA compatible

I've build a toy train (BRIO / IKEA compatible) that I've made for my son. This is the older model with 2 types of screws - the newer ones are far better designed and use only 1 type of screws for everything (check the link to my premium…

Print approx. €0.61–€0.75 excl. taxPreliminary estimate for one variant

Downloads
1,800
Likes
647
Rating
4.88
P

MMU2S Ikea Drybox

Stackable Ikea Samla Drybox and Spoolholder. You have an option of printing either just drybox for 2 spools, or spoolholder for three spools, or both. Dybox was able to maintain 16%-18% humidity in environment with in between 45% to 92%…

Print approx. €4.71–€5.76 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,765
Likes
141
Rating
4.75
P
PrintablesDaveDude

Balcony Strawberry Tower with IKEA Persillade Modular Hydroponic

Features Modular structure, easily scalable, put modules together, twist & lock, done Filling module with cap 3-way planting modules (hollow version recommended) Internal/external water dispenser modules Lid Custom net pot for Jiffy-7 41…

Print approx. €0.47–€0.57 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,760
Likes
497
Rating
4.75
P
PrintablesMany24

IKEA Skadis - Hex key holder / Držák na inbusy Wera

Simple 2 piece holder for hex key set, specifically made for Wera set but probably can be used with many others. This design works with 2 hooks, which is easy to install and remove, but holds very well thanks to the small bumps on the…

Print approx. €0.54–€0.66 excl. taxPreliminary estimate for one variant

Downloads
1,490
Likes
389
Rating
4.92
P
PrintablesTechNerd

Toy Train BNSF locomotive BRIO / IKEA compatible

BNSF diesel locomotive toy train (BRIO / IKEA compatible) You will need the following screws to put everything together. 14x ISO 14585 (DIN7981) 2.9mm x 13mm ( https://amzn.to/3WgKty1 ) 2x ISO 14585 (DIN7981) 2.9mm x 19mm (…

Print approx. €0.33–€0.41 excl. taxPreliminary estimate for one variant

Downloads
1,467
Likes
455
Rating
5
P
Printablessteffenbew

IKEA Skadis Cutter / Scissors Holder

Holder for a slightly thicker cutter or scissors on an IKEA Skadis board. I printed this model with PLA with 0.2mm layer height.

Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant

Downloads
1,191
Likes
174
Rating
5
P
PrintablesTrollmaster_LP

Ikea Skadis Weapon Hook Weapon Holder

Weapon Hook for Ikea Skadis Print Settings Printer: Custom Anet AM8 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 50% Filament: Extrur PETG Category: Organization

Print approx. €2.62–€3.20 excl. taxPreliminary estimate for one variant

Downloads
1,013
Likes
113
Rating
4.67
P
PrintablesNunuz57

Ikea Skadis brushes holder

Ikea Skadis stand for 6 brushes.

Print approx. €0.75–€0.91 excl. taxPreliminary estimate for one variant

Downloads
971
Likes
193
Rating
4.88
P
PrintablesOestle

IKEA 365+ 10.6l Filament Storage & Dry Box

Modular filament storage & dry box using the IKEA 10.6l containers that can fit 2 spools of 1kg filament. All the parts for one box fit on the buildplate of the MK4 and can be printed at once. Currently for storage only, but that's all i…

Print approx. €6.97–€8.52 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
898
Likes
202
Rating
4.89
P
PrintablesTechNerd

Toy Train Tank Car BRIO / IKEA compatible

Tank car for toy train (BRIO / IKEA compatible). This is the older model with 2 types of screws - the newer ones are far better designed and use only 1 type of screws for everything (check the link to my premium toy trains below). You…

Print approx. €0.67–€0.82 excl. taxPreliminary estimate for one variant

Downloads
889
Likes
227
Rating
4.9
P
Printablesfarin_cz

Ikea TROFAST box insert (2 levels)

Print boxes twice. Use supports for top. Optionally, print also lock. Once as it is and another one mirrored. Stick locks into grooves in the bottom. Small boxes will be fixed in corner positions but you can still take them out. This is…

Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant

Downloads
877
Likes
201
Rating
5
P
PrintablesFrankyD80

IKEA Metod Förbättra legclip for cover panel incl. extention variants

I designed this feet / legclips for the IKEA kitchen METOD and its plinth FÖRBÄTTRA to: be more stable with PLA and PET be printable as one or multiple parts (to glue together) have multiple length to avoid “Aufdoppeln” and fit my needs…

Print approx. €0.64–€0.78 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
755
Likes
52
Rating
5
P
PrintablesMartin Kurka

Duplo - Brio, IKEA, Wooden Train adapter - Remix

German: Dieser Adapter ermöglicht die Verbindung von Duplo-Steinen mit Holzeisenbahnschienen, ideal für den Bau von Brücken und Abhängen. Der äußere Zapfen wurde modifiziert, um auch auf einen Duplo-Stein zu passen. Verbesserungen:…

Print approx. €2.26–€2.76 excl. taxPreliminary estimate for one variant

Downloads
658
Likes
80
Rating
4.83
P
PrintablesTor

IKEA Helmer drawer insets (Updated)

Update 08/12 new thinner design for faster printing. Included 3mf files for cube and rectangle. Speed settings are tweaked for maximum speed without (that much) quality loss. Simple insets that fit in Ikea Helmer drawer. The inner bottom…

Print approx. €6.96–€8.51 excl. taxPreliminary estimate for one variant

Downloads
607
Likes
97
Rating
5
P
PrintablesTechNerd

Toy Train Union Pacific BRIO / IKEA compatible

Union Pacific toy train (BRIO / IKEA compatible). This is the older model with 2 types of screws - the newer ones are far better designed and use only 1 type of screws for everything (check the link to my premium toy trains below). You…

Print approx. €1.92–€2.34 excl. taxPreliminary estimate for one variant

Downloads
586
Likes
174
Rating
5
P
PrintablesTom Archer

Vinyl Record Divider for Ikea Kallax/Expedit

As I've collected more records I've struggled with them leaning against each other while they are stored in my Ikea Expedit. This is a simple divider which splits a cube into four even sections. It's easily attached to the underside of…

Print approx. €2.43–€2.97 excl. taxPreliminary estimate for one variant

Downloads
570
Likes
175
Rating
5
P
PrintablesTechNerd

Norfolk Southern toy train (BRIO / IKEA compatible)

Norfolk Southern diesel locomotive toy train (BRIO / IKEA compatible). This is the older model with 2 types of screws - the newer ones are far better designed and use only 1 type of screws for everything (check the link to my premium toy…

Print approx. €0.67–€0.82 excl. taxPreliminary estimate for one variant

Downloads
488
Likes
148
Rating
5
P
Printablesaxe

IKEA Lack Filament Pass-through

Filament Pass-through for IKEA Lack Enclosure Print instructions Rafts: No Supports: No Resolution: 0.2 Infill: 15%

Print approx. €0.17–€0.21 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
468
Likes
68
Rating
5
P
PrintablesJacob Kincheloe

Screwless IKEA LACK Table Stacker

Helps you stack two or more IKEA LACK tables on each other without screws. Print instructions This is a IKEA LACK table mount for stacking two (or more) tables on top of each other, without screws. Feel free to remix this, but please…

Print approx. €1.21–€1.48 excl. taxPreliminary estimate for one variant

Downloads
464
Likes
75
Rating
4.75
P
Printableshector yanes

Ikea Ivar Hooks

Needed some hooks for my Ivar shelves to hang things and came up with this. It's a tight fit because I wanted the hook to stay on under its own friction. Printer Settings for Good Quality: Used PLA+ from Sunlu. No supports. I used brim to…

Print approx. €7.59–€9.28 excl. taxPreliminary estimate for one variant

Downloads
447
Likes
122
Rating
4.9
P
Printablesbruchsturm

Jewellery Tree with hidden box IKEA Skadis Mount

Found this jewellery tree on Thingiverse and wanted to design a mount for my Skadis pegboard. It uses the Skadis T-Clip System by Will and has 2-3 mounting points, depending on the version. The original was quite small, so I scaled it to…

Print approx. €1.22–€1.49 excl. taxPreliminary estimate for one variant

Downloads
428
Likes
87
Rating
5
P
PrintablesMadeWhatNow

XL Moon Lamp 350mm / 13.7" with IKEA fittings for PrusaXL

[edit - the current gcode file prints a model with fairly substantial walls. This makes for a robust moon, but is not ideal for lighting purposes. Currently working on slimming down via the model creation process.] I could not find a moon…

Print approx. €47.43–€57.97 excl. taxPreliminary estimate for one variant

Downloads
422
Likes
83
Rating
5
P
PrintablesSJB4127

Rapid Print Track connector for Brio / IKEA wooden track sets

Update 2024.01: Added the S-Connector and extra long version for those tracks that just dont fit. Newly designed to be a rapid print and low material version of the loved track sets. If you have these train sets, you know that these…

Print approx. €0.21–€0.25 excl. taxPreliminary estimate for one variant

Downloads
414
Likes
63
Rating
4.89
P
PrintablesMarSzal7500

IKEA Skadis- 608 bearings dispenser- no supports

A dispenser for twelve standard 608 bearings compatible with the IKEA Skadis perforated board system. When printing, it is recommended to use a gyroidal infill and lower print speeds to maintain maximum precision, so that the bearings do…

Print approx. €2.34–€2.86 excl. taxPreliminary estimate for one variant

Downloads
411
Likes
137
Rating
5
P
Printablestwothingies

Monitor Stand legs (IKEA hack)

Use these 3D-printed supports to make a monitor stand for under $20. Here's how: Non-printed parts IKEA BERGSHULT shelf . There are different sizes, but the one we used is 80 cm x 20 cm and 20 mm thick. We've included the F3D file so you…

Print approx. €12.64–€15.45 excl. taxPreliminary estimate for one variant

Downloads
408
Likes
88
Rating
5
P
PrintablesLayerCake

IKEA Skadis Valve Index Holder with Charging Function

Inspired by the Valve Index Boomerang Charger and my lack of desk space. Thank you to Valve for sharing their Index CAD files. Make sure you have good layer adhesion and test the print, don't blame me for a dropped headset. The holder…

Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant

Downloads
397
Likes
98
Rating
5
P
PrintablesTurbopstros

IKEA SKADIS Shelf with Honeycomb Pattern

IKEA SKADIS Shelf with Honeycomb Pattern Dimensions of the bottom part of shelf (plus outer brims and hooks..) 20 x 120 mm 30 x 120 mm 30 x 160 mm Sliced with the modifier to expose the infill pattern You can freely change the infill…

Print approx. €0.63–€0.77 excl. taxPreliminary estimate for one variant

Downloads
385
Likes
50
Rating
5
P
PrintablesDalsFuns

Ikea Mosslanda Hook

Snap-on Hook. 8mm wide, 3mm thick. Tested with PETG 0.3mm, 100% infill. I've built a Lack Tower for my Prusa i3 MK3S+, and found out Mosslanda Picture Ledge has 55cm width which is identical to Lack Table, so I screwed the ledge on the…

Print approx. €0.22–€0.26 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
366
Likes
79
Rating
5
P
PrintablesGilles

Brush pot 28 slots (version with and without Ikea Skådis stand) - Pot pour pinceaux 28 slots (version avec et sans support Ikea Skådis)

[En] To make it easier to store my many brushes and save time finding the right one, I've created a pot to hold 28 miniature painting brushes. There's a model to put on a table and another to fix on the Ikea Skådis pegboard. I reused the…

Print approx. €8.80–€10.76 excl. taxPreliminary estimate for one variant

Downloads
366
Likes
45
Rating
5
P
PrintablesKlaus

Cutlery Tray for old Ikea 60cm drawers / Besteckeinrichtung für Ikea Besteck-Schublade

This cutlery tray now uses the whole height of the drawer and has more individual separation for small stuff you usually need in a kitchen. The larger models have “wings” to prevent warping. Just cut them off after printing. No support…

Print approx. €12.23–€14.95 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
320
Likes
42
Rating
2
P
PrintablesOtty_Skipper

IKEA Skadis tweezers holder

A simple holder for tweezers that only requires 2 slots in a row.

Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant

Downloads
299
Likes
33
Rating
5
P
PrintablesJohannes G

MK3/S Shorter LCD Supports - fits Ikea Stuva

Shorter LCD supports designed so that the MK3/S can fit inside an Ikea Stuva enclosure with a hole for the bed cables. There is one hole for each side, slightly smaller than the bolt. Use a m3x10 bolt to thread directly into the plastic.…

Print approx. €1.07–€1.31 excl. taxPreliminary estimate for one variant

Downloads
294
Likes
21
Rating
4.86
P
PrintablesMava

IKEA Trådfri - Wireless motion sensor mount

Adjustebel wall mount for IKEA Trådfri wireless motion sensor. Extra parts 3xM3 8mm countersink screws and 3xM3 nuts. Glue sensor holder to lid Print instructions Model is drawn to fit in two M3 nuts internal. On 0.15mm it will be on…

Print approx. €1.12–€1.37 excl. taxPreliminary estimate for one variant

Downloads
280
Likes
35
Rating
4.8
P
PrintablesDlteck2000

IKEA Hemnes 110364 renforced

Printed in PETG with a 45 degree tilt for greater resistance. The stl file is already placed in the correct position. - Enable borders - Activate organic supports - Gyroid filling at 20%

Print approx. €0.61–€0.75 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
277
Likes
14
Rating
5
P
PrintablesApex23

Ikea Skadis holder for Tamiya Masking Tape dispensers

Organize 18,10 and 6 mm Tamiya Masking tape dispensers on your Ikea Skadis board. See also my other designs for more ways to Organize your Tamiya tools on the Skadis board.

Print approx. €5.00–€6.11 excl. taxPreliminary estimate for one variant

Downloads
276
Likes
34
Rating
5
P
PrintablesMartin v R

Ikea Utrusta (and Blum Inserta) hinge template

This template is for marking the mounting holes for the 2025 type Ikea Utrusta (110°) and Blum Clip Top Inserta hinges. The small part of the template is for the cupboard side, the big part for the door side. All you need is a pencil and…

Print approx. €0.85–€1.04 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
275
Likes
19
Rating
5
P
Printablessteffenbew

IKEA Helmer Drawer Insets

Drawer insets in various sizes with different compartments for the IKEA Helmer drawer unit. I sliced the the model with thirds vertically in half as a smaller variation. Only when creating the technical drawings I noticed that the model…

Print approx. €3.04–€3.71 excl. taxPreliminary estimate for one variant

Downloads
274
Likes
57
Rating
5
P
PrintablesLeathercraftV

IKEA Skadis Knipex Screwdriver

Two precize holders for Knipex screwdrivers Flat and Cross, other types of screwdrivers or other brand might or might not fit in (not tested). Tested screwdrivers Knipex flat sizes: 0,5x3, 0,8x4, 1x5, 1,2x6,5 (982030, 982040, 982055,…

Print approx. €1.75–€2.14 excl. taxPreliminary estimate for one variant

Downloads
273
Likes
62
Rating
5
P
Printablesradoslawo

Ikea Lack LEG adaptation for Ender S1

Oryginal contruction is too short to cover Ender S1

Print approx. €4.60–€5.63 excl. taxPreliminary estimate for one variant

Downloads
228
Likes
51
Rating
5
P
PrintablesderQurps

IKEA Drybox Remix + Rewind

This is a remix based on the Complete IKEA Drybox Solution idea from crashdebug on thingiverse with some element ideas from Mihai's DryBox on thangs. All parts but roller_mount_inside and roller_mount_outside are done from scratch in…

Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant

Downloads
221
Likes
78
Rating
5
P
PrintablesMaster2386

IKEA Skadis Holder Zollstock / Meterstab / Folding Ruler

Printinformation: Use Support for the hooks. ("Support on build plate only") Thanks to https://www.printables.com/@Historicc_559983 for providing the Parametric IKEA Skadis Hooks i used in this Model.…

Print approx. €1.21–€1.48 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
217
Likes
17
Rating
5
P
PrintablesMetti

IKEA BESTA hole pattern drilling jig

I designed this drilling jig to assemble my BESTA cabinet doors on a METOD cupboard. Align the end of the jig with the end of your cabinet (your cabinet door ends here). There is a triangular cutout to mark the middle of the hinge, so…

Print approx. €1.46–€1.78 excl. taxPreliminary estimate for one variant

Downloads
217
Likes
31
Rating
4.75
P
PrintablesMaxime

IKEA PRESSA CLOTHESPIN REMPLACEMENT

To replace the Ikea Pressa clothespin who's breaking all the time . My model have a print in place pivot point for a better life span. Print instructions Print in one part and press ( until you hear a clic) it before use. Install the…

Print approx. €0.56–€0.68 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
216
Likes
35
Rating
5
P
Printablesices

IKEA Tradfri Motion Sensor Corner Mount

🇬🇧 IKEA Tradfri Motion Sensor Corner Mount A holder to mount an IKEA Tradfri motion sensor in a corner. The sensor is simply plugged onto the holder. The holder can be glued into the corner, but also has a hole for a countersunk screw. 🇩🇪…

Print approx. €0.32–€0.39 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
214
Likes
24
Rating
5
P
PrintablesLukynovoCZ

plastový držák - IKEA LOCK 16418 STROPNÍ SVÍTIDLO

plastový držák - IKEA LOCK 16418 STROPNÍ SVÍTIDLO

Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
208
Likes
7
Rating
5
P
Printablesteslapunk

Wera Wrenches 395 HO/7 SM wall mount / IKEA Skadis Pegboard holder

This holds the 7 Wera Wrenches in place. Distance of 5mm mounting holes is 45mm from hole to hole. PLA or PETG with 15% infill and 0.2mm layer height will do the job, print orientation as ist comes from the STL file. For the IKEA Skadis…

Print approx. €5.43–€6.63 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
198
Likes
38
Rating
4.67
P
Printablesfefefico

Dualshock 4 holder for Ikea Skådis

Here are the settings I've used on my Ender 3 with Prusa Slic3r: 0.16 layer height - makes it stronger and nicer; organic support material for the hooks - you could also use grid, doesn't change much; grid infill 15% - any pattern could…

Print approx. €1.14–€1.39 excl. taxPreliminary estimate for one variant

Downloads
194
Likes
20
Rating
4.5
P
PrintablesnFinity

IKEA Starkvind Wall Mount

This custom-designed wall mount is specifically created for the Ikea Starkvind air purifier, providing a secure and space-saving solution for mounting it on a wall. The holder is robust and easy to print, ensuring a perfect fit for your…

Print approx. €6.19–€7.56 excl. taxPreliminary estimate for one variant

Downloads
183
Likes
19
Rating
5
P
PrintablesB.Stacey

IKEA Skadis T-Handle Hexkey holder

A metric hex key tool holder. Designed for mounting on the IKEA Skadis wall mount. Bit sizes include 2mm, 2.5mm, 3mm, 4mm, 5mm, and 6mm. Print settings Print with label side on print bed for best quality labels. This also allows the…

Print approx. €6.04–€7.38 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
183
Likes
25
Rating
4.5
P
PrintablesNunuz57

Ikea Skadis torchlight holder

Ikea Skadis torchlight holder for : https://amz.run/5cmE https://amz.run/5cmF Print setting: Print in PLA With support

Print approx. €1.16–€1.42 excl. taxPreliminary estimate for one variant

Downloads
179
Likes
30
Rating
5
P
PrintablesAllpa

Tonies platform for Skadis (2 variants) // Tonie Plattform für IKEA Skadis (2 Varianten)

Small and easy print to display the Tonie figures of your kids. Just hang them to your existing IKEA Skadis system. 2 different versions available! Tonie-Podest: You have to bent it a little bit to get it into the Skadis holes. But then…

Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant

Downloads
164
Likes
27
Rating
4.5
P
PrintablesAngel

Deburring tool holder for IKEA Skadis

I liked the idea of the deburring tool holder and the idea of 45 degree printing to avoid supports. So I designed my own holder using these ideas for my Skadis panels. Fits CGBOOM brand tool. Feel free to ask me to adapt this model if you…

Print approx. €2.53–€3.09 excl. taxPreliminary estimate for one variant

Downloads
164
Likes
11
Rating
4
P
PrintablesApfelhobbit

Dessicant container for Ikea drybox (Samla 22L)

Stable box for the desiccant which goes under the spoolholders of the ikea drybox (Samla, 22L). https://www.printables.com/de/model/98008-drybox-for-4-spools-ikea-samla-22l-based/files

Print approx. €4.98–€6.08 excl. taxPreliminary estimate for one variant

Downloads
157
Likes
16
Rating
0
P
Printablesinnercube

IKEA RÅSKOG hook

I wanted a hook for my Ikea Råskog, but all available hooks here were a little too loose, so I created this model. It fits very tight and well. It consists of two parts. The smaller part is inserted after the hook is in place. It has a…

Print approx. €0.31–€0.37 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
151
Likes
29
Rating
5
P
PrintablesMarius Bendsen

IKEA Shelf Support Pin (HEMNES/BRIMNES) - 110525

Bought a used HEMNES bed that was missing a bunch of these 110525 pins. Printed in two parts and then squezed together. Printed on Anycubic Kobra Neo with 0.4mm nozzle in PLA.

Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant

Downloads
151
Likes
20
Rating
0
P
PrintablesRetrix

Cutting board holder for ikea and one wooden cuttingboard

The dimensions of the cutting board slots are 18mm for wooden 9mm for IKEA cutting boards Update: I've added a second file for only the IKEA cutting boards. I hope you enjoy this remix!

Print approx. €6.54–€7.99 excl. taxPreliminary estimate for one variant

Downloads
149
Likes
22
Rating
0
P
Printableshdurdle

IKEA PAX ÖVERSIDAN LED Clip

We needed to mount the översidan LED strip to a wardrobe with a top lip that prevented using the standard mounting hardware. This is a very simple screw-in clip mount for the LED strip. I used a MK4 with the Input Shaper 0.20mm STRUCTURAL…

Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant

Downloads
149
Likes
19
Rating
5
P
Printablessacrilegor

MUGLASS - Earmuff + Safety glasses wall holder - Ikea Skadis and Küpper wall

I never knew where my hearing protection, or safety glasses are, so I made a combined holder for booth of them. It can accommodate bigger earmuffs and glasses. I tried to minimalize the required wall space, and make the design easy to…

Print approx. €4.84–€5.91 excl. taxPreliminary estimate for one variant

Downloads
143
Likes
17
Rating
4.75
P
PrintablesJhannes

MK4 Display Adapter for the Ikea LACK Enclosure

You need the adapter to mount the MK4 Display in front of the Ikea LACK enclosure

Print approx. €0.20–€0.25 excl. taxPreliminary estimate for one variant

Downloads
138
Likes
39
Rating
5
P
Printableskoil

IKEA SKÅDIS Morakniv knife mount

I use my Morakniv knife a lot so I wanted it more accessible, mashed two models together and hung it up on my SKÅDIS! Print with the mount plate facing down, use supports.

Print approx. €0.25–€0.31 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
131
Likes
27
Rating
5
P
PrintablesAdrián Vidal

Ikea Skadis phone charger organizer

Use 0.2 layer height so you wont need supports for the inner part. Just cut the small film of plastic that will be blocking the holes. The only part that will need support is the notches that go into the skadis.

Print approx. €1.23–€1.50 excl. taxPreliminary estimate for one variant

Downloads
129
Likes
30
Rating
5
P
Printablesi5cemi

IKEA Haken (Handtuchhalter universal auf 2cm Basis)

IKEA Handtuchhalter mit 2cm Basis - beim Mutterkonzern nicht mehr lieferbar. Im Silber dem Original sehr ähnlich. IKEA towel rail with 2cm base - no longer available from the parent company. Very similar to the original in silver.

Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
128
Likes
14
Rating
0
P
Printables3DM-DeMeern

Ikea Samla Wall holder 28cm

The way you can store your filaments in the Ikea Samla boxes is great. But then you need an cupboard to place all your Samla boxes in. And I did not want that. So I created two holders that combined can hold a full Samla box. I have…

Print approx. €1.17–€1.43 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
128
Likes
41
Rating
4.67
P
Printablespetermcd1010

Ikea Skadis Fluke 87 V multi-meter mount

Check the related Fluke 117 model for a nice probe mount.

Print approx. €1.27–€1.55 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
126
Likes
25
Rating
5
P
Printablesgiganto53

IKEA wireless charger to Apple MagSafe adapter

This is an adapter to use the Apple MagSafe charger for iPhone in the same place as the IKEA NORDMÄRKE for both the drill mount or the furniture built-in. The drill mount uses the IKEA FIXA drill set. I made the fit snug with no wiggle…

Print approx. €0.61–€0.75 excl. taxPreliminary estimate for one variant

Downloads
126
Likes
9
Rating
5
P
PrintablesOtty_Skipper

Ikea 365+ Stackable Cap Ikea Glas Deckel

Moin, ich habe für unsere Ikea Gläser (365+ 45cl) einen Schutz vor Fliegen und anderen Insekten entworfen. Das Haus in der Mitte dient als Griff. Damit man sie jedoch platzsparend stapeln kann, sind die Häuser verschieden groß.

Print approx. €0.88–€1.08 excl. taxPreliminary estimate for one variant

Downloads
125
Likes
24
Rating
0
P
PrintablesDaniel B.

IKEA Skadis light

Add light for your Ikea Skadis. 8 Grams No support needed

Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant

Downloads
125
Likes
66
Rating
4.5
P
PrintablesChristi Creates

Enclosure -IKEA Lack table foldable door

Update: I added a mirrored version of all bottom corners, top corners, and the middle bottom hinge. This is my version of the IKEA Lack enclosure. It is higher to put a plate of foam and concrete plate/ stone plate under the printer to…

Print approx. €0.33–€0.41 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
123
Likes
62
Rating
5
P
PrintablesGutenberg 3D

Garnish (IKEA KVARTAL system) Cart and Hook set

Recently I found myself in a situation. I needed new blackout curtain in my office. I bought some fabric, however I could not find Carts and Hook for KVARTAL, it looks like they stopped producing it. The carts are 6th iteration so I think…

Print approx. €0.06–€0.07 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
120
Likes
9
Rating
0
P
Printables3uDo

Ikea Billy Bohrhilfe, anpassbar / drilling aid, customizable

Da ich in der Werkstatt für ein Billy-Regal noch zusätzliche Löcher brauchte, habe ich diese Bohrhilfe gemacht. Bohrergröße 5mm. Die großen Löcher sind nur um Material zu sparen. In der Fusion360-Datei sind die Abhängigkeiten so gewählt,…

Print approx. €1.31–€1.61 excl. taxPreliminary estimate for one variant

Downloads
119
Likes
32
Rating
5
P
PrintablesJayS

Hinge for Ikea Hemnes Shoe Cabinet

Print with supports and 100% infill for rigidity

Print approx. €0.71–€0.87 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
112
Likes
12
Rating
5
P
PrintablesZohan#4775

Ikea 365+ IHÄRDIG Gewürzglas / Gewürzmühle schraubbarer Trichter

Schraubbarer Trichter zum leichteren Einfüllen von Gewürzen und Kräutern in die sehr beliebten Ikea 365+ IHÄRDIG Gewürzgläser / Gewürzmühlen. Ebenso passt er für nahezu jedes Gewürzglas auf dem Markt, sei es Rewe, Edeka, Penny, Norma,…

Print approx. €1.80–€2.20 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
108
Likes
25
Rating
5
P
PrintablesMario M

Ikea Patrik chair leg caps repair

The Ikea Parik is a really good chair, firm pre-formed foam and comfortable to sit on. We bought nine of them second hand for little. The legs have a foot that can move around a ball at the end of the leg. One of the chairs missed the…

Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
106
Likes
9
Rating
5
P
Printablesbuchnema

Ikea Duktig Play Kitchen Replacement Foot

Don't ask how, but the kids of our friends lost one feet of their Ikea Duktig play kitchen . So here is the replacement part. Printed in 0,2mm PETG structural preset. There are some overhangs and bridge infills, but with my Prusa MK4 they…

Print approx. €2.61–€3.19 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
104
Likes
7
Rating
0
P
PrintablesBrummy

IKEA BEKANT Desk Floor-Wall Spacer/ Abstandshalter Ikea Bekant

Auf Laminat stehen die Schreibtische nicht am Platz. Gerade bei der Höhenverstellung ist ein Abstand zur Wand wichtig . Das ist ein Abstandshalter für Ikea Bekant, passt wohl auch auf andere Schreibtische Breite Innenmaß 80 mm. Vorne ist…

Print approx. €1.13–€1.38 excl. taxPreliminary estimate for one variant

Downloads
102
Likes
17
Rating
5
P
PrintablesSteveS42

Prusa MK3 Ikea LACK enclosure

My Prusa MK3 enclosure. It features: 2 full size front doors for easy access to the printer walls and doors easily removable without tools back walls snap on with magnets doors use lift off hinges spool holder mount for original Prusa “T”…

Print approx. €0.70–€0.86 excl. taxPreliminary estimate for one variant

Downloads
102
Likes
93
Rating
5
P
Printablescbearman

Ikea Lack Drill Template

If you are making an Ikea Lack enclosure (for example https://blog.prusaprinters.org/cheap-simple-3d-printer-enclosure_7785/ ), you might want to add a third lack table at the bottom to raise it up to a more useful height. There are a…

Print approx. €0.71–€0.87 excl. taxPreliminary estimate for one variant

Downloads
99
Likes
23
Rating
4.5
P
PrintablesMBLX

Drawer Organisers Universal/IKEA ALEX

Drawer Organisers Universal/IKEA ALEX

Print approx. €0.92–€1.12 excl. taxPreliminary estimate for one variant

Downloads
95
Likes
17
Rating
0
P
PrintablesWolfcrest

IKEA Hemnes Foot

I lost the original IKEA Hemnes feet for my dresser, so I quickly modeled a simple replacement part. This model fits the six-drawer dresser, but may fit other furniture of the Hemnes line as well.

Print approx. €0.37–€0.45 excl. taxPreliminary estimate for one variant

Downloads
92
Likes
7
Rating
0
P
PrintablesDr.Daniel

Vacuum Cleaner holder for Ikea Plasta Cabinet

Vacuum Cleaner holder for Ikea Plasta Cabinet, to fix the hose on the wall of the cabinet. I used some spare screws from the ikea plasta cabinet. The hose diameter of the vacuum cleaner ist 45mm I printed it with support and have not…

Print approx. €3.07–€3.75 excl. taxPreliminary estimate for one variant

Downloads
91
Likes
17
Rating
5
P
PrintablesMarczan2501

IKEA STYRBAR SKADIS MOUNT

Since I have the metal mount that comes with the switch mounted on the wall, I needed a simple way to store the remote control near my printer. The project consists of two files, the actual mounting and hooks for SKADIS. Unfortunately,…

Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant

Downloads
88
Likes
6
Rating
0
P
PrintablesTheDOJ

Ikea Hemnes Shoe Rack Guide Plug

Somehow mine got built without this piece on one side. I thought it wouldn't matter much but the rack keeps coming out with kids banging on it every day. So, I modeled it in Tinkercad and printed it out and it works! No more shoe rack…

Print approx. €0.35–€0.43 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
87
Likes
12
Rating
0
P
PrintablesHarabi

Ikea Samla 22L - Drybox silica tray for ThomaS Spool Holder

When I had to take the silica out to dry, part of it was always stuck under the seal. So I designed a tray to make it easier to handle the silica. At first I planned a more robust one, but I was reluctant to use so much filament on it, so…

Print approx. €2.36–€2.89 excl. taxPreliminary estimate for one variant

Downloads
87
Likes
16
Rating
4.75
P
Printablesishikawats

IKEA Jonaxel Mesh Basket Hex Wall

Divider wall designed to fit inside the IKEA JONAXEL slim mesh basket ( 904.199.65 , 25x51x15 cm). Small pins on the sides slot into the mesh openings, keeping the divider in place. Hexagonal pattern design.

Print approx. €1.38–€1.69 excl. taxPreliminary estimate for one variant

Downloads
87
Likes
19
Rating
0
P
Printableshoeni

Ikea Skadis Bosch GluePen holder with drip pan

Not pretty, but good enough to keep a GluePen at hand on an Ikea Skadis rack without dripping hot glue. You should print the small mount wedge standing vertical on the print plate with some supports (not much required for this little…

Print approx. €1.91–€2.33 excl. taxPreliminary estimate for one variant

Downloads
86
Likes
14
Rating
5
P
PrintablesMiquel

Ikea Skadis Two Bottle Holder (50 mm/200 ml/Vallejo)

Strong bottle holder for Ikea's Skadis peg system. Holds two bottles of 50 mm diameter (like Vallejo's 200 ml bottles). Uses six pegs for better strength. How to print: Print on the side with supports as shown in the pictures for…

Print approx. €2.55–€3.11 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
84
Likes
14
Rating
0
P
PrintablesErl

IKEA Alex feet

I broke one of the feet on my Alex drawer section and made a new one. Here's the design if anyone needs it.

Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant

Downloads
82
Likes
18
Rating
4.5
P
Printablesishikawats

Divider for IKEA Jonaxel Mesh Basket

Divider wall designed to fit inside the IKEA JONAXEL slim mesh basket ( 904.199.65 , 25x51x15 cm). Small pins on the sides slot into the mesh openings, keeping the divider in place. Voronoi pattern design.

Print approx. €1.29–€1.57 excl. taxPreliminary estimate for one variant

Downloads
79
Likes
9
Rating
0
P
PrintablesPrinter4496

IKEA SKADIS Shelf Edge or Whiteboard Mount

Model Description I already have a whiteboard in my office and I didn't want to drill new holes in the wall to mount an IKEA Skadis pegboard. Since I couldn't find a suitable solution for attaching the pegboard to a whiteboard, I created…

Print approx. €0.77–€0.94 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
78
Likes
5
Rating
0
P
PrintablesZohan#4775

Ikea 365+ IHÄRDIG Gewürzglas / Gewürzmühle schraubbarer Deckel

Schraubbarer Deckel zum sicheren Verschliessen von Gewürzen und Kräutern der sehr beliebten Ikea 365+ IHÄRDIG Gewürzgläser / Gewürzmühlen. Ebenso passt er für nahezu jedes Gewürzglas auf dem Markt, sei es Rewe, Edeka, Penny, Norma, Netto…

Print approx. €0.94–€1.15 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
78
Likes
22
Rating
5
P
Printableszadak

Ikea Alex Drawer Organizers

The 1x1 box is 49mm x 49mm x 60mm The 3x3 grid base is 147mm x 147mm x 5mm More sizes and some with space for labels are in the works. I've printed them all in PLA with no support.

Print approx. €1.34–€1.64 excl. taxPreliminary estimate for one variant

Downloads
78
Likes
15
Rating
0
P
PrintablesSi1verEag1e

Ikea VÖRDA / VOERDA knife sheath/protector

A friend aproached me with an IKEA VÖRDA / VOERDA knife, asking if i could try and design some kind of sheath, that would allow him to safely transport his favourite cooking tool when camping, going to outdoor BBQ events and so on……

Print approx. €3.11–€3.81 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
78
Likes
4
Rating
5
P
Printablesnwilk123

Ikea LÄTT (Latt) chair seat replacement

I have the ikea Latt table and chairs set for my kids and i broke the seat when sitting on it (i guess I am too heavy for it when the seat was wet from a spill). I was unable to find a replacement seat for the chair from Ikea so I decided…

Print approx. €13.62–€16.64 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
76
Likes
6
Rating
0