Search results: iniu

Sort order

865 models

P
PrintablesAnheledir

ESP32-Camera arm-mount for MK3/MK4 and other 3030 aluminium extrusions w/ t-nuts

This is a pre-arranged and pre-supported collection of all necessary parts to print a case for the ESP32-Camera with a side-arm mount on the 3030 Extrusion of the MK3 and MK4, and t-nuts that don't need disassembling of the printer to…

Downloads
330
Likes
47
Rating
4
P
PrintablesHeikit

Hook Haken 30x30 and 40x40 Bosch Aluminium Profile

It would be nice if you post your make. Thank you

Downloads
275
Likes
34
Rating
0
P
PrintablesMarcus

Endcap Aluminium Profile B-Type Slot 8 30x30

Just an other endcap for an 30x30 aluminum profile Print instructions No support No raft Printed with HD-Glass

Downloads
188
Likes
19
Rating
0
P
Printables365lyf

Thrustmaster TSS Handbrake Shifter - 160mm Aluminium Profile Mount -V3

After exhaustive testing, a very solid mount for the Thrustmaster Sparco TSS Handbrake to suit 160mm Aluminium Profile Rig. I wanted something that could stand up to the abuse of hard shifting, and think I've now settled on a solution.…

Downloads
172
Likes
25
Rating
5
P
PrintablesMartinRowan

Angled (V Type) Aluminium Profile LED Light Strip Clips for Ikea Platsa Enclosure (Pinmount)

Using plastic pin mounts to secure angled aluminium LED extrusion in the Ikea Platsa enclosure. Simple screwless installation using pin-mounts that fit into the existing holes in the side of the enclosure. Printing Enclosure base mount…

Downloads
66
Likes
7
Rating
0
P
Printablesitjak

Drop-in T-nut for 3030 Aluminium Extrusion Slot / Series / U 6 fully printable for M4 threads

Hammerkopfmutter T-Nut Mutter mit M4 Gewinde für 30x30 Aluminumprofile Nut / Slot / Series / U 6

Downloads
49
Likes
5
Rating
0
P
Printablessdk45

IKEA KOPPLA 6 ways EU socket support for 80x40 aluminium extrusion

I've simply print it with the default PLA 0.2 profile for the MK3S on Prusa Slicer. Support needed. The screw hole diameter are 8mm.

Downloads
27
Likes
9
Rating
0
P
PrintablesMartinD

Safety-Cap for Aluminium-Beam (Abdeckkappe Alu-Träger)

Cap to avoid injuris on sharp edges. Sicherheitskappe um Verletzungen vorzubeugen. Two sizes: 55,5x128,5 and 55x124,5

Downloads
18
Likes
1
Rating
0
P
PrintablesFokieH

TFT70 - Display Housing - Desktop stand & 20 Series Aluminium Extrusion

Hier ein Gehäuse für ein BTT TFT70 Touch Display das ich an meinem Eigenbau Drucker verwende. Dieses Gehäuse kann zum einen einfach auf den Tisch abgestellt oder auf ein 20mm AluProfil aufgesteckt werden. Somit ist man sehr flexible und…

Downloads
2
Likes
2
Rating
0
P
PrintablesmotivierteSocke

Aluminium Extrusion Nuts and T-Nuts

Updated Version to my previous design. (simplified the design and edited some geometry to make them fit universally) A set of easy to print and use nuts for 20-Series and 30-Series extrusions. There are 2 types and 3 mounting options:…

Downloads
4,098
Likes
1,817
Rating
4.91
P
PrintablesStarrEngineer

Customizable Plate Bracket for Aluminium Extrusion Profiles (Misumi 2020, 2040, 4040, ...)

This is a port of https://www.thingiverse.com/thing:2503622 , by mightynozzle. I do not claim ownership of the model . I had a hard time finding something like it on printables, so I ported it here. The following text is taken straight…

Downloads
3,795
Likes
846
Rating
5
P
PrintablesORM

T-nut for 2020 aluminium extrusion profile

This is a complete pack of T-nuts designed for the assembly of 2020 aluminium profiles. This pack contains a variety of T-nuts for different applications. There are T-nuts for different sizes of screws, and there are T-nuts with…

Downloads
2,418
Likes
755
Rating
4.9
P
PrintablesCL Performance

Aluminium Extrusion Profile 5 6 8 with dimensions 2020 3030 4040

Für alle deutschen Nutzer habe ich hier noch ein Video gemacht, wie ich einen Unterbau für meinen neuen 3D Drucker erstellt und gebaut habe. Vielelicht inspiriert es ja den ein oder anderen. For all english users, the following youtube…

Downloads
1,984
Likes
573
Rating
5
P
PrintablesEA3D

Aluminium profile 20x20

profile popular for building your own 3dprinter

Downloads
1,955
Likes
68
Rating
0
P
Printablessjdawson

Cable Clip (Twist In) for 4040 Aluminium Extrusion

A simple cable clip for use with 4040 extrusion. Once printed, fit the small section into the extrusion t-slot, and then twist to lock into place. Should be a tight friction fit when in place. A side opening on the clip allows for a…

Downloads
1,944
Likes
206
Rating
4.93
P
PrintablesNouweland

SIM RIG END CAPS for aluminium profiles 4040, 4080 & 40120

*EDIT Some people ding the design to not fit exacly from what i found out not all 40x40/80x80 frames are exacly those dimensions i based the design on a Simlab frame. I took over my sim rig from a friend, but it was missing a few end caps…

Downloads
1,731
Likes
183
Rating
4
P
PrintablesJan

3D printer ventilation system for window fit to 100mm aluminium hose

Ventilation system for 3D printer. Easy to hook to the top of opened window and connect to 100mm aluminium hose. Works greatly with QIDI plus 4 printer. Suggestion is to remove inside filter in the chamber, connect 100mm aluminium hose to…

Downloads
1,674
Likes
753
Rating
5
P
Printablesripper

Strong corner bracket for 2020 aluminium extrusion - 5mm slot

Modified for 5mm wide slots, otherwise it's the same model. prints without support, and works best in PETG

Downloads
1,653
Likes
348
Rating
5
P
PrintablesDevilscave

Aluminium Extrusion Profiles, 55 Typs STL files

EDIT: I added a RAR with all files in one!!! A small collection of aluminum profiles to print adapters or other things for your printer. If you can use it please leave a like there. Please support me and leave a like there. It's just a…

Downloads
1,437
Likes
77
Rating
5
P
PrintablesBasementLAB

Linear Connector for 2020 Tslot Aluminium Profile M4 Thread

Linear Connector for 2020 Tslot Aluminium Profile M4 Thread Two models available: Standard - Heavy Duty Suitable for: Update 15/04/24 - Added Reinforced Type 15/07/2025 - Added REV1 versions - Geometry cleanup All our designs are free to…

Downloads
1,267
Likes
201
Rating
5
P
PrintablesBasementLAB

2020 Slide In Connector for 2020 Tslot / Vslot Aluminium Profile

2020 Slide In Connector for 2020 Tslot / Vslot Aluminium Profile Suitable for: All our designs are free to download and use. Your support fuels our creativity. If you downloaded and enjoyed this file, please leave a like. Thanks!…

Downloads
1,029
Likes
163
Rating
5
P
PrintablesBasementLAB

2020 T-Slot 45_90 connector Hidden Mount Aluminium Profile

2020 T-Slot 90° connector Hidden Mount Aluminium Profile Suitable for: Please be advised that final print dimensions can vary due to printer settings, calibration, and filament type. Therefore, if parts fit together with difficulty, it is…

Downloads
973
Likes
172
Rating
4
P
Printableschris_kwng

2020 V-Slot Aluminium Extrusion Profile - Low Poly Model for your Prototypes

This is just a simple, lowpoly model of 2020 V-Slot Aluminium Extrusion/Profile. Designed using the dimensions from the attached screenshots. Have fun using it in your own projects :-) Category: 3D Printer Parts

Downloads
967
Likes
59
Rating
5
P
Printablesstojagrozny

Aluminium/cling foil or baking paper holder

My goal was to create a simple model that requires no supports and would print in an acceptable amount of time. For this last requirement, I made the walls 1,8 mm thick (as I am using a 0,6 mm nozzle - you can safely set 0,6 mm line…

Downloads
962
Likes
487
Rating
5
P
PrintablesBasementLAB

4040 T-slot Aluminium Profile plus Accessories for profile system

4040 Tslot Aluminium Profile plus Accessories for profile system Adjust the Z scale to obtain longer profiles ( 4040_Tslot_Aluminium_Profile.stl) Accessories for 4040 profile system 4040_T-slot_Nut__Aluminium_Profile_M4…

Downloads
953
Likes
164
Rating
0
P
PrintablesmotivierteSocke

2020 and 3030 Hammernuts / T-slot Nuts for aluminium extrusions

Update! I made a new version with even more compatible extrusion types: https://www.printables.com/model/493621-aluminium-extrusion-nuts-and-t-nuts A set of easy to print and use nuts for 2020 and 3030 extrusions. There are 3 types:…

Downloads
948
Likes
113
Rating
4.67
P
PrintablesNouweland

SIM RIG CABLE CLIP for all aluminium profiles

I love sim-racing, but I also want all the cables neatly tucked away. That's why I designed a clip that can easily slide into the rails of any type of aluminum profile. Once inserted, you can rotate it 90 degrees to secure it in place.…

Downloads
884
Likes
122
Rating
5

Cable clip for aluminium profile 20x20 mm V-slot 6 mm

They print quick and easy. They hold in place very well without any wobble or loose tolerance feeling

Downloads
876
Likes
96
Rating
4.43
P
Printablesbjripp

20x20 Aluminium Extrusion Corner Bracket

60x60x20 corner bracket that will accept M3 screws. Prints flat without supports.

Downloads
850
Likes
178
Rating
5
P
Printables2mD

Nozzle Holder Insert/Endcap for 40x40 Aluminium V Slot Extrusion

a Nozzle Holder that fits inside a 40x40 Aluminium V Slot extrusion. Common on many Printers, in my case its an Ender 3 Pro Fits 18 Nozzles and Usually you can Fit 2 of these on your printer, or 4 if you don't mind putting them on the…

Downloads
841
Likes
334
Rating
4.86
P
PrintablesLukasz Filipski

Aluminium Tent Stake Pusher/Handle

This is a simple solution to issues associated with trying to push small aluminium tent stakes into the ground - and getting your palms cut due to small surface area of the stake, or deforming them if using a hammer. This simple tool…

Downloads
827
Likes
90
Rating
5
P
PrintablesAivar Siska

Handheld Barcode Scanner Holder - Can be mounted on Extruded Aluminium Profiles

I have a lot of scanners on the production line I manage as an engineer. Most of them are Honeywell's 1950GHD which come with quite flimsy holders (oversized). I designed something that is a bit more tight and can be easily attached to…

Downloads
798
Likes
55
Rating
5
P
PrintablesCrambambuli

Aluminium Profile 2020 slot cover flat

Adjusted to print with max 0.6 nozzle in vase mode Category: 3D Printer Parts

Downloads
745
Likes
76
Rating
5
P
PrintablesLuka Sudar

Connector for 2020 aluminium extrusion

Used for connecting two 2020 aluminium extrusions. Holes are for M4 screws. Can be printed with draft 0.3 mm profile. Lock the measures and type Z: 100 mm if it loads larger. Print horizontal without supports.

Downloads
703
Likes
96
Rating
4.5
P
Printableswerz 99

Nuts for 2020 Aluminium Extrusion

Nuts for 2020 Aluminium Extrusion, T-Slot Nut and Hammer-Nut (Drop-In-Place) for M3, M4 and M5 Screws.

Downloads
690
Likes
113
Rating
4.67
P
PrintablesLevente Ritzl

FFBeast base w/ 4080 aluminium extrusion profile

Hello guys, this is a Fanatec clone designed base setup for the FFBeast wheel DIY project. On the backplate i used a XT60 socket and a Type-C USB port. I have a 2080 aluminium profile version too but i need a little time to finish it.

Downloads
680
Likes
70
Rating
5
P
PrintablesBasementLAB

3030 Linear Connector for Tslot Aluminium Profile M4 Thread

3030 Linear Connector for Tslot Aluminium Profile M4 Thread Two versions: Standard Type Reinforced Type Suitable for: ***Warning: Dimensional Tolerance Notice*** This connector is designed for our standard profile specifications and may…

Downloads
629
Likes
102
Rating
4.71
P
Printablesrsfuhrer

Aluminium T-Slot Extrusion - 8020 derivatives - 1-8 Slots

As part of a project I undertook to DIY (design-it-yourself) a modular EggBot-style robot from scratch using some parts I had on hand, I decided to use T-slot 8020-style profile as my base to allow for adjustments. Two issues were…

Downloads
597
Likes
70
Rating
0
P
PrintablesG3D

2020 Aluminium extrusion 3d model for CAD or 3d printing 1-500mm

I have created a model of 2020 aluminium extrusions as I had found it difficult to find a clean model online so to make it more convinient for others I had mad a simple stl file of an aluminium extrusion. If you want to build a fully…

Downloads
595
Likes
32
Rating
5
P
PrintablesSdewe

Aluminium profile and V-Slot angle connector

An angle connector (90 degrees) for V-Slot and aluminium profiles of types 2020, 3030 and 4040. The model is parameterised (.f3d file included). The holes are designed for M4 screws. I use M4x8mm screws and M4 hammer nuts to fix the…

Downloads
593
Likes
98
Rating
5
P
PrintablesBasementLAB

3030 Tslot Aluminium Profile - Adjust the Z scale to obtain longer profiles

3030 Tslot Aluminium Profile 4 sides open Adjust the Z scale to obtain longer profiles All our designs are free to download and use. Your support fuels our creativity, if you download/enjoyed this file, please leave a like. Thx

Downloads
565
Likes
53
Rating
4.5
P
Printables3dLightPrint

Strong 3 corner bracket for 2020 aluminium extrusion - 5mm slot

Modified for 5mm wide slots, connects 3 corners. Prints without support, and works best in PETG I've printed mine on Pla+ and it works quite well

Downloads
550
Likes
70
Rating
5

Self Centering Drill Guide - for Aluminium Extrusions

Thanks for checking out my model! You'll find all the details, instructions, and recommended print settings below. If you enjoy my designs and would like to support my work, feel free to buy me a coffee . I'd really appreciate it! Happy…

Downloads
526
Likes
195
Rating
5
P
Printablesamidar
18+

The source marked this model as adult content.

Downloads
517
Likes
161
Rating
5
P
PrintablesLW design

Aluminium profile cover 40x40

Aluminium profile cover 40x40 (N8I) with good fit. Useful to cover the sharp edges and keep off dust.

Downloads
512
Likes
59
Rating
5
P
PrintablesSaeire

Box and Cutter for Plastic Wrap Film, Cling Film, Aluminium Foil or Parchment paper

slight remix (just organised per plate) of original for Box and cutter for various kitchen foils/films . Sizes organised per plat for 330mm and 390mm depending on what size you need

Downloads
491
Likes
56
Rating
5
P
Printablesfirstgizmo

Universal Caravan Camper Aluminium Rail End Cap

Made my ones out of black ABS with 0.2 layer hight. They work fine for allready 2 years under harsh conditions. would not recommend PLA therefore. Dont forget to apply new sealant under the caps during replacement.

Downloads
476
Likes
95
Rating
0
P
PrintablesBasementLAB

T-Slot Connector Hidden Mount M4 Thread 3030 Aluminium Profile.

T-Slot Connector Hidden Mount M4 Thread 3030 Aluminium Profile. Suitable for: Resize to adjust dimension ***Warning: Dimensional Tolerance Notice*** This connector is designed for our standard profile specifications and may not always fit…

Downloads
472
Likes
85
Rating
5

Angle Bracket for 20x20 Aluminium Profile

Easy to print, don't need support.

Downloads
463
Likes
38
Rating
5
P
PrintablesPolyGone

40x20 Cable Duct for 4040 Aluminium Profile

This is the 40x20 mm version of the Cable Duct for 4040 profiles. It comes in three lenghts, 50 mm, 100 mm and 150 mm. Also see my other models for 40x10 mm and 40x40 mm versions.

Downloads
458
Likes
69
Rating
5

Cable clip for aluminium profile 20x20 mm slot 8 mm

They print quick and easy. They hold in place very well without any wobble or loose tolerance feeling

Downloads
453
Likes
31
Rating
0
P
PrintablesMAXPROBE

Bed leveling wheel lock for Creality CR10 Smart Pro by MAXPROBE for red metal alloy aluminium leveling wheel nuts

Bed leveling adjustment wheel nut lock Developed by MAXPROBE for Creality CR10 Smart Pro printers with the red metal leveling wheel nuts. These wheel locks are low profile and prevent the bed from self-adjusting or being accidentally…

Downloads
448
Likes
56
Rating
5
P
Printablesjk_printer

4040 aluminium profile cap for Ender 3 (Pro), tight fit

Since my original Creality end caps didn't stick anymore after taking them off twice, I needed new, tightly fitting caps for my printer. These did the job. If they don't fit snugly after printing, wrap a single layer of clear scotch tape…

Downloads
444
Likes
36
Rating
5
P
PrintablesAlex

Swivel Joint for 40x40 Aluminium Extrusion

I printed the parts with Prusament PETG (PLA works just as well). The sides I printed with .15 layer height to get clean holes. For the rest I choose .2 layer height. The pins could be inserted as an anti rotation lock. The side to side…

Downloads
429
Likes
111
Rating
0
P
PrintablesBoogie

Cable clip collection for aluminium extrusions (40 mm and 45 mm)

I found a really good cable clip collection for (40 mm and 45 mm) aluminium extrusions from thingiverse and wanted to share them. Will these fit my aluminium profiles and cables? These clips were designed for the very common 40 I-type and…

Downloads
420
Likes
125
Rating
5
P
PrintablesMatten79

Strong corner bracket for 2020 aluminium extrusion

Strong corner bracket for 2020 aluminium extrusion. M5 screw holes. No supports needed. Use brim for best bed adhesion, PETG and solid infill. Remember to tap the threat to the extrusion.

Downloads
388
Likes
72
Rating
5
P
Printablesjacek

T-Slot nut for M4 screw and 4545 Aluminium extrusion profile

I needed to bolt some stuff to the aluminium extrusion profile I found in the basement. Found out that 4545 is rather exotic/not as popular as 2020/4040, and other tslot nuts doesn't scale linearly for this extrusion, so had to make my…

Downloads
385
Likes
62
Rating
0
P
Printablesboothyboothy

ShinyCNC - Ball Screw & Aluminium Upgrade for the TinyCNC

This is a Ball Screw & Aluminium Upgrade for Ivan Mirandas fabulous 3D printed Tiny CNC. Please support Ivans Channel by purchasing the original documentation at the following video link: (1422) 3D PRINTED CNC BUILT FROM SCRATCH CUTS…

Downloads
380
Likes
56
Rating
0
P
PrintablesBasementLAB

2020 Floor Mount Base Low_ Aluminium Profile

2020 Floor Mount Base Low_ Aluminium Profile Suitable for: https://www.printables.com/it/model/767250-profile-2020-alu-4-sides-open-adjust-the-z-scale-t https://www.printables.com/model/1319551-2020-extruded-aluminum-profiles-collection…

Downloads
366
Likes
68
Rating
5
P
PrintablesVeracon

40mm Aluminium Profile Endcap

Endcaps for 40mm aluminium profiles. 40x40 40x80 40x120 40x160 80x80 80x120 If you like the print profiles, please consider rating them. Thanks :-)

Downloads
351
Likes
35
Rating
0
P
Printablessale723

Aluminium Profile 20x20x1000(500/400/300/200/100/50)

This are 3D models of a Aluminium Profile. This project was made in Autodesk Inventor 2021. There are different lenghts of profile, and you can choose what lenght you want. If there is a specific length required, pleas contact me and I…

Downloads
342
Likes
26
Rating
0
P
PrintablesStobbart

Cache moyeu pour jantes aluminium

Cache moyeu pour les jantes en aluminium. La face visible est lisse et on peut facilement coller un logo. Le diamètre extérieur est de 60 mm. Update 04.07.2024 Nouvelle version v4: Les crochets sont légèrement plus épais pour une…

Downloads
337
Likes
6
Rating
0
P
PrintablesBasementLAB

2020 T Slot Twist In Cable Clamp 10x20mm for Aluminium Profile - Guida Cavi con aggancio rapido per profilo alluminio 2020

2020 T-Slot Twist In Cable Clamp 10x20mm for Aluminium Profile - Guida Cavi con aggancio rapido per profilo alluminio 2020 Suitable for: Other sizes: Resize to adjust dimensions All our designs are free to download and use—because sharing…

Downloads
336
Likes
51
Rating
5
P
PrintablesUniversalMaker

2020 / 3030 Aluminium extrusion brace (For Voron ...)

A simple brace for 2020 or 3030 extrusions. Secured with 4mm screws. Happy printing! 🤩 Do you like the design? Please consider to support me for only 3$ this helps me massively designing more! Thank you! More Models from me my art &…

Downloads
333
Likes
75
Rating
5
P
Printablesdan188

40 Series Aluminium Profile End Cap

40mm x 40mm end cap for 40 series aluminium extrusion profile. Category: DIY

Downloads
332
Likes
30
Rating
0
P
Printablesnerdbeere

Aluminium Extrusion Corner Bracket 2020 / 2040 with M5 Holes

Corner Brackets for 2020 / 2040 Aluminium Extrusions with M5 Holes. Print with 100% Infill for best strength

Downloads
323
Likes
58
Rating
5
P
PrintablesRodrigo Sclosa

100mm Cable Cover for 20x20 Aluminium Extrusion

This is my design of a closed cable cover for 20x20 Aluminium Extrusion profile. The source in Fusion 360 if you would like to customize it was included. Print Settings Printer: Custom FDM Rafts: No Supports: No Resolution: 0.2 Infill:…

Downloads
317
Likes
50
Rating
5
P
PrintablesIchooorrr

Cable holder for aluminium profile 3030 & 2020

Cable holder for profile 3030 and 2020 based on the Prusa cable holder for the MK4

Downloads
313
Likes
52
Rating
5
P
PrintablesHeavyMetalGuy

Twist In Cable Clamp [4040 Aluminium Profile, 4ELP]

I saw Z123456789's clamp for 2020 Profiles and it inspired me to make one for the 4040 profiles i'm using on a project. I recommend printing with 100% infill for stability. The first time twisting it in is quite hard but that way it's a…

Downloads
312
Likes
25
Rating
0
P
PrintablesDorkvader97

Nozzle Holder with Handle Insert/Endcap for 40x40 Aluminium V Slot Extrusion

A Nozzle Holder that that fits inside a 40x40 Aluminum V Slot extrusion. Common on many Printers ( Ender 3 + Clones ). I remixed this because I wanted a handle to be able to open the drawer easier, of course it HAD to be in the shape of…

Downloads
303
Likes
60
Rating
4.8
P
PrintablesTypQxQ

Tapping Jig for 3030 and 3060 Aluminium Extrusion

Making it easy to tap and make holes for the key when building out of 3030 and 3060 extrusions. It uses a 608ZZ bearing on the tap part and a 626ZZ for driling holes. This way the drill does not drill into the jig. I used a "Völkel M8…

Downloads
299
Likes
76
Rating
5
P
PrintablesAriel

3030 Aluminium profile drop-in M4 nut T-nut

3030 Aluminium profile drop-in M4 nut Designed for standard M4 hut with the following dimensions: 7x3.2mm 3030 Aluminium profile corner bracket for M4 screw avalible here: https://www.thingiverse.com/thing:3559713 Print Settings Printer:…

Downloads
294
Likes
35
Rating
0
P
PrintablesBasementLAB

2020 Twist In Cable Clamp (two Sizes) T-Slot Aluminium Profile - Guida Cavi con aggancio rapido per profilo alluminio 2020

2020 Twist In Cable Clamp Two Sizes for T-Slot Aluminium Profile - Guida Cavi con aggancio rapido per profilo alluminio 2020 Two Sizes - Due Misure: 14.5x20mm 20x20mm Suitable for: Other size: Resize to adjust dimension All our designs…

Downloads
294
Likes
59
Rating
0
P
PrintablesPolyGone

40x10 Cable Duct for 4040 Aluminium Profile

This is the 40x10 mm version of the Cable Duct for 4040 profiles. It comes in three lenghts, 50 mm, 100 mm and 150 mm. Due to the minimal height it might be a bit hard to remove once it's clicked into place. Also see my other models for…

Downloads
291
Likes
43
Rating
0
P
PrintablesMo

Bininiu Garmin Mount

This is a replacement piece for the Bininiu Garmin Mount https://www.amazon.de/gp/product/B0BD1W9HZ9 The injection molded part breaks if you look at it wrong so I made a replacement. It is a snug fit to hold the Garmin Varia secure on my…

Downloads
282
Likes
24
Rating
4
P
PrintablesBasementLAB

2020 T- Slot Foot Cap Low Type / Floor Mount Aluminium Profile - Flangia Base a Pavimento Profilo 2020 Bassa

2020 T- Slot Foot Cap Low Type / Floor Mount Aluminium Profile - Flangia Base a Pavimento Profilo 2020 Bassa Suitable for: https://www.printables.com/it/model/767250-profile-2020-alu-4-sides-open-adjust-the-z-scale-t…

Downloads
280
Likes
45
Rating
0
P
PrintablesAriel

3030 Aluminium profile M4 nut T-nut 15x6mm

3030 Aluminium profile M4 nut 15x6mm Designed for standard M4 hut with the following dimensions: 7x3.2mm 3030 Aluminium profile drop-in M4 nut T-nut available here: https://www.thingiverse.com/thing:3559740 Category: 3D Printer Parts

Downloads
278
Likes
20
Rating
4.5
P
PrintablesBEN7D2

Aluminium profile drill jig for blind joints

This jig works in combination with four 625 bearings to make precise 5mm holes in your 2020/2040/4040 aluminium profile with 20mm of distance to create a perfect blind joint holes! It can be used with only two bearings in total, but I…

Downloads
275
Likes
38
Rating
5
P
Printables13lubushby

20x20 Aluminium Extrusion

A 40mm length of 20mm x 20mm aluminium extrusion

Downloads
272
Likes
26
Rating
5
P
PrintablesNadir @ CN3D

M3 T-Slot NUT for aluminium extrusion

I print them in PETG and they work just fine I have used them on my Ender 6 Upgrades and they just work great

Downloads
267
Likes
20
Rating
5
P
PrintablesFrank

Kabelhalter für Aluminium Profil Nut 5

Ich wollte ein Paar Kabelhalter, die einfach zu montieren sind und bei denen ich jeder Zeit einzelne Kabel hinzufügen oder entfernen kann. Zum Befestigen einfach in das Profil klippen. Bei dem großen Halter kann der Riegel weggelassen…

Downloads
262
Likes
35
Rating
0
P
PrintablesMeister Edel

Festool TKS 80 EBS stop (aluminium profile) V2

I was missing a "limiter" 4 the angle stop of my Festool tks 80 EBS. It is quite annoying to do repeatable cuts without it. New versions online. Check em out yourself :P In addition to the printed parts you will need M5 x 20 (25?) Screw +…

Downloads
260
Likes
69
Rating
4.5
P
Printableseried

Aluminium 2020 (20 mm) profile cap/cover

I did not found any cap that fitted snugly, so I designed this simple one. Printed with 30% infill, it fits really well.

Downloads
256
Likes
30
Rating
4.5
P
PrintablesTheCableGuy96

Filament Rack for Aluminium Bars

I was looking for the perfect filament rack for myself when I came across this excellent design by Jimmit. Very simple but strong and easy to assemble, but I didn't want to use a broom handle so I did a simple remix to fit 1000 x 12 x 1…

Downloads
253
Likes
98
Rating
4.8
P
Printablessale723

Aluminium Profile 30x30x1000(500/400/300/200/100/50)

This are 3D models of a Aluminium Profile. This project was made in Autodesk Inventor 2021. There are different lenghts of profile, and you can choose what lenght you want. If there is a specific length required, pleas contact me and I…

Downloads
242
Likes
19
Rating
5
P
PrintablesTom Sender 2007

Aluminium profile 40x40

The screws needed are M5 x 0.8 screws. The profile is 40x40mm wide and the openings on the side are each 10mm wide. U can connect several units via M5 x 0.8 threadrods.

Downloads
241
Likes
36
Rating
0
P
PrintablesTri_Engineer

Cableclip for Aluminium 30x30mm Profiles (ITEM)

There are threee options with different diameters. 12, 10 and 8mm.

Downloads
241
Likes
26
Rating
0
P
Printablesdzalf

Angle Bracket - Aluminium profile

Angle bracket (L-shaped) for ~42mm-50mm aluminum structures. The piece has protrusions to avoid angular rotation during screw tightening. Please review the technical drawing to verify if the measurements are adequate for your needs. Print…

Downloads
239
Likes
25
Rating
5
P
PrintablesMaximilian Laus

ITEM Profil connector | Aluminiumprofil | Würfelverbinder | Eckverbinder

Rechtwinklige Verbindung von bis zu 3 Aluminiumprofil 20x20 Nut 5 I-Typ Right-angled connection of up to 3 aluminum prof Passend für Aluminiumprofil 20x20 Nut 5 I-Typ für ISO 7380-1 M5 Halbrundkopfschraube Suitable for aluminum profile…

Downloads
238
Likes
10
Rating
5
P
PrintablesDombi3D

IKEA Skadis LED strip clips for 15x15 Aluminium profile

With these clips you can light up your Skadis wall and workplace under it. All you need is a 15x15mm Aluminium L profile a LED Strip and power supply for it. You can glue the ledstrip into the Aluminium profile which also helps to keep…

Downloads
234
Likes
131
Rating
0
P
Printablesprouting

Paper/Ribbon Aluminium foil Corrugator

Corrugator for paper or aluminium foil. Used for diy Ribbon Microphones Use two M4 hex Socket bolts 40mm long and nut. One is stuck inside the crank the bushing makes joint with cog Print Settings Printer: FLSUN Q5 Rafts: No Supports: No…

Downloads
234
Likes
49
Rating
0
P
PrintablesRolf Bakker

2020 Aluminium Profile variable angle bracket T-nut

This variable angle bracket fits standard 2020 extrusion profiles. It requires the core of one extrusion to be threaded with M5 thread. One part is mounted with a M5x10 flat head screw at the cross cut side of the extrusion. The other…

Downloads
233
Likes
42
Rating
5
P
PrintablesS. Stobbe

Cable Duct for Aluminium Extrusion

This cable duct can be modified in the included Fusion 360 file easily to fit your needs. You can adjust width, height and number of segments. It can be fixed on an aluminium extrusion with M5 screws, of course you can also remove the…

Downloads
231
Likes
46
Rating
3.5
P
PrintablesVojtech

Cable clip - aluminium profiles 20x20

Cable clip for aluminium profiles 20x20.

Downloads
230
Likes
46
Rating
5
P
Printablesjodo

Articulating Raspberry PI Camera Mount for 3030 aluminium extrusions on Prusa MK3

I initially started using the Articulating Raspberry PI Camera Mount ( https://www.thingiverse.com/thing:3114849 ) on the Prusa MK3 mounted on the x-axis motor but didn't like the fact that I couldn't have the camera at a fix point. Since…

Downloads
229
Likes
51
Rating
4.63
P
PrintablesJosef Baber

optimized very Strong Corner Bracket/Winkel for Aluminium Extrusion Profiles ITEM in 40x40 M6

Hello, this is an optimized very Strong Corner Bracket/Winkel for Aluminium Extrusion Profiles like ITEM in 40x40 size with holes for M6 Screws. I optimized the structur to have the strongest layer lines, how you can see in the pictures…

Downloads
225
Likes
23
Rating
5
P
PrintablesBasementLAB

2020 T- Slot Foot Cap / Floor Mount Aluminium Profile - Flangia Base a Pavimento Profilo 2020

2020 T- Slot Foot Cap / Floor Mount Aluminium Profile - Flangia Base a Pavimento Profilo 2020 Suitable for: https://www.printables.com/it/model/767250-profile-2020-alu-4-sides-open-adjust-the-z-scale-t…

Downloads
220
Likes
40
Rating
0
P
Printablesslimpickens

12mm Aluminium (Aluminum) Square Tube Connector

Three-way connector for 12mm square tubing. One side of the middle doesn't protrude to the edge of the aluminium so that it can be printed without supports. The downside is that it won't look great if used to connect pieces that are…

Downloads
219
Likes
43
Rating
5
P
PrintablesSnafky

Controller holder Pimax Crystal Light for 4040 Aluminium Sim Rigs

Controller holder Pimax Crystal Light for 4040 Aluminium Sim Rigs This is a holder I Made for the Controller of the Pimax Crystal light. This is needed motion compensation. The Bolt hole is M8 and fits the 4040 of 4080 alimimium frame…

Downloads
217
Likes
4
Rating
0
P
Printablesfns720

Rachet with t-nut for 30 mm aluminium extrusion profiles

I wanted to mount some cables to my Prusa MINI's Z alu profile using something reusable - that's how this rachet was born. The "T-nut ratchet for 30 mm alu extrusion profile.stl" contains a pocket for an M3 nut. You can fix it with a 15…

Downloads
216
Likes
36
Rating
0