3,782 models
The charging cable always breaks at the same position, just right under the plug. Don't replace it, Repair it with this easy print! This works for Apple USBC and lightning, as well as for samsung charging cables! No glue or tape is…
Inspired by the energy of waves and the elegance of natural rhythm, this sculptural phone stand merges functional balance with fluid aesthetics . Part of the Meyui Onami series , this piece explores how motion and stillness can coexist in…
A Minimalist IPhone case with hexagonal Design on the back and a nice snug fit. Works fine with Both PLA and PETG.
D: Schutzhülle für das Apple iPhone 7 und iPhone 8 Ich habe die Hülle in PLA als harte Hülle und in FLEX als flexible Silikon ähnliche Hülle gedruckt. E: Safty case for Apple iPhone 7 and iPhone 8 I printed the case in PLA as a hard case…
Credit for this design goes to https://www.thingiverse.com/jburd/designs I simply added the cable tracks on the back. I also added an addition file with and extension to support a phone if it isn't magnetic (tested with iPhone 11 and it…
I wanted a fun and better way to use the MagSafe chargers for my iPhone and Apple Watch, so I designed this! :) Printed on MK3S with painted on supports for hands and top of circle face. 3mf attached is the slicer file with settings and…
Designed to work ideally with an iPhone 14 Pro or similarly sized iPhone (13, 13 Pro, 14 should be similar) to charge with Apple MagSafe USB-C charger. V2 - Added TPU Base After months of use, I wanted to revise this to fix a couple of…
D: Schutzhülle für das Apple iPhone XR. Ich habe zwei Modelle gezeichnet eines mit Rückseite und eines ohne (Bumper-Hülle). Ich habe die Hülle in PLA als harte Hülle und in FLEX als flexible Silikon ähnliche Hülle gedruckt. Die Hülle ist…
Just a simple MagsSafe phone stand with the infill visible. Use the .3mf file to specify an infill that suites your taste. Adaptive Cubic is my favorite infill for this model. Printed at .3mm with supports using Eryone Navy Blue Matte…
Best fit with apple leather case Prints without supports on the side. I added Gcode for Prusa Mini and i3 Mk3s If you want a stand for just the iPhone: https://www.prusaprinters.org/prints/128413-iphone-stand
Easy to print dummy model of the iPhone 15 Pro Max. Print as oriented and no supports needed. Perfect fit in original case.
D: Schutzhülle für das Apple iPhone 7 plus+ und iPhone 8 plus+ Ich habe die Hülle in PLA als harte Hülle und in FLEX als flexible Silikon ähnliche Hülle gedruckt. E: Safty case for Apple iPhone 7 and iPhone 8 I printed the case in PLA as…
Whether you've got flexible filament or not, these cases make for an easy print and a sweet looking phone. I designed these cases to print without support, so they turn out very clean. Both versions also provide a buffer for the screen…
This are protector for the expensive original Apple Lighting cable, develop this thing to try to avoid buying new cables twice a year. Better if printed in TPU or flexible material, but works with PLA and ABS or Petg Basic setting, 0.2…
Simple iPhone and Apple Watch stand that holds both the MagSafe charger for any iPhone 12 and the standard Apple Watch charger. Both stands are tilted 15 Degrees backwards which allows routing the cable inside while still achieving a…
A small twisted piece that wraps around the charge cable to protect the ends from being damaged from frequent pulling. This file is suitable for the original iPhone charge cable's size. May not be suitable for other cables. Print…
A variation of my Galaxy Watch 4 / Cell phone charging station. The base model is the same but the watch charging spot has been modified to hold a Apple Watch contactless charger. The model will fit any charger that's 27.6 mm wide by 6,…
UPDATE 13.07.2022: Uploaded improved cover. Modern 3mf file format. The petg models should be less tight. In addition there's a TPU optimized model. Have Fun! 📱 case_iphone_13_flat_petg v4.3mf case_iphone_13_petg v4.3mf case_iphone_13_tpu…
Credit for this design goes to https://www.thingiverse.com/jburd/designs and https://www.thingiverse.com/grevtech/designs for adding the cable route organizer. I added another magsafe charging dock on the base for airpods/pro/gen3. Rotate…
Uploaded the G-Code as well for the prusa mini+ with painted on supports. Supports are needed!
Charging station designed for holding iPhone with MagSafe, Apple Watch (all models) and AirPods (not pro). No supports needed during printing. I printed with: material: PLA nozzle: 0.4 mm layer height: 0.24 mm (first layer: 0.28 mm)…
Mount any 67mm camera lens filter to your iPhone. It's precisely measured to fit an iPhone 12 (Pro), without a case. I'm using it with a ND2-ND400 (9 Stops) Filter from K&F for filming. Advantages over commercial products I found: All…
Reduce clutter on your nightstand with this beautiful yet functional wireless charging stand for your wireless-charging capable iPhone and Apple Watch. Requires: Wireless-charging capable iPhone (iPhone 8 or newer, iPhone Xs Max pictured)…
I printed in ASA to be able to withstand the heat in my car. Edit 6/18/24: I added 2 files one for 162mm length phone w/ case and a Step file to be able to adjust the model to your liking. Just make sure the pegs that go into the vents…
Wird das iPhone geladen und liegt quer hat man einen prima Wecker am Bett. Um dies bequem zu realisieren habe ich diesen Ständer mit integriertem Kabelhalter designed. Mein iPhone ist in dieser Hülle . Gedruckt in PETG, Düse 0,6 mm, layer…
A design from Scratch. I began modifying another model but i realized is better to start a new one from scratch. Because the amazon base has a strong light, i made a cap to make possible sleep near the stand without the annoying light…
I designed this neat stand in which you can mount the IKEA Rallen wireless charger. Standard size: https://www.thingiverse.com/thing:3068268 NEW - XL Version: https://www.thingiverse.com/thing:3141797 Flat version:…
This is an iphone12/iphone12 pro with Case mount for a Sprinter 2019+ (VS30). Inspired by another mount but redesigned from scratch to make it easier to print and remade for the iphone12/iphone12pro. Print instructions 15% infill, in PETG…
I needed a stand for my iPhone, Apple Watch and Airpods Pro, that also had a MagSafe holder. I also needed the watch to be sitting 90degrees upright so that the nightstand function on the watch was working. I didn't find any so I made a…
Requires Magnets with a 6mm diameter and 3mm thickness. Moreover a M3x12 Screw (or longer) + M3-Nut is needed, that fixes the hinge of the MagSafe mount. On the bottom there are 4 places for felt stickers (20mm diameter, 3mm thickness).…
Holes on back of chargers to easily remove chargers and improve cooling. Channel in chimney for easier cable management. Thicker front walls of chimney to adapt for bigger printing nozzles (printing original model on 0.6mm nozzle results…
Use StandBy to view information at a distance while iPhone is charging You can use StandBy to turn your iPhone into a bedside clock, a photo frame, a display for viewing widgets or Live Activities in full screen, and more. - iPhone User…
Wanted a dock for all my apple products. Adapted KacperL's design to add in iphone and make the airpod's charging wireless. This dock was designed to work with all apple watch sizes. The airpod pro portion of the design was designed to…
Filament : Devil Design. Blue / Orange Transparent. PETG 0.20mm. Infill : 15% Gyroid. Nozzle : 230c. Bed : 90c. Support : None. Vertical Shells : 2. Horizontal Shells : Top / Bottam : 4.
Iphone 7, 8, and SE2020 case that should be printed with solid materials like PETG or PLA . I recommend PETG as it provides just a bit of flex to the case which can help with getting it on and off. PLA will work just fine just be careful…
Der Handyhalter ist mein erster 3D-Entwurf, dennoch finde ich, dass er mir gut gelungen ist. Die zweite Version verfügt über eine Aussparung für die Kamera, eine raue Oberfläche auf der Vorderseite und eine mit Hexagonen bemusterte…
Iphone 17 Pro Replica sized as the original
This sunshade is designed to help you see the screen of your iPhone 11 Pro even in strong sunlight. It also delays the heating of the iPhone in high air temperatures, which normally causes an automatic reduction of the screen brightness.…
Wall mount basket iPhone 12 ProMax and remote Sber TV Корзина для настенного монтажа iPhone 12 ProMax и пульта дистанционного управления СберТВ.
Iphone 3G OR 3GS replica sized as the original
Uses a standard 56 MM diameter MagSafe charge “puck' and the standard Apple Watch charge ”puck". Has a takeup spool for long wires and a relief for the camera “bump”. Printed here in PolyTerra PLA at 0.3 later height (no support) This…
Filament : Color Fabb. Green Transparent. PLA / PHA. 0.20mm. Infill : 15% Gyroid. Nozzle : 215c. Bed : 60c. Support : None. Vertical Shells : 2. Horizontal Shells : Top / Bottam : 4.
Desk variant of my “ Charging butler / iPhone + Watch + AirPods Pro wall mount charger ”. Charging butler / Apple iPhone, Watch, AirPods Pro desk charger with Apple “Standby Mode” support in iOS 17 and with integrated 65W power supply to…
(Google Translate French - English) Two functions 1. Store the iPhone earphone in a bag or pocket without getting tangled or knotted. Plug and headphones completely hidden. 2. The cable has a length of 1m30 ~ which can in some cases be…
Print with either PLA or PET since it's outside the enclosure. Hardware required (used spare hardware in my MK4 kit) M3x10 x2 (make sure the bottom screw doesn't stick out past the wall) M3 nut will be creating a right side STL file
This is a remix of the Elevated Phone Holder by Lief_3d I have extended the hook seat portion by 2mm to accommodate the iPhone 13 max pro with a protective case. This is a very god and rugged iPhone stand. I have printed multiple units…
The MagSafe Compatible iPhone Stand is a practical and versatile 3D printable design tailored for users eager to fully experience the new StandBy mode in iOS 17 while keeping their device charged using Apple's original MagSafe accessory.…
See the original model. Although it was originally designed for non-Max iPhone versions, it's also working well with an iPhone 17 Pro Max. Be sure you have good bed adhesion prior to attempting this print -- the skeletal design leaves a…
Slide in bracket to hold the iPhoneX that I use on my motorcycle. Requires a mounting device like the Wunderlich MultiPod or RAM mount, 2 screws and nuts. I am new to 3D printing so if you have improvement suggestions or comments let me…
This design is suitable for iPhone models 6S, 7, 8, SE 2nd generation and SE 3rd generation as they share a similar design and dimensions of their cases. All butons and cameras are accessable. For a perfect fit you should use a phone case…
Keep your iPhone steady in place and out of the way on top of the car's armrest. Fixing and removing it is easy with a Velcro support, so you won't damage the car with adhesives or holes. Frame is a bit larger than the iPhone X so it can…
Compatible with iPhone 13
Aiphone IX-EA IP Video Door Station Intercom Junction Box Junction Box for the Aiphone IX-EA IP Video Door Station Intercom. I tried in ABS and PETG, having way better results with PETG. ABS tends to warp easily. Two holes for the Aiphone…
This model attaches to the standard Garmin bean bag mount. It is sized to accommodate the iPhone 17 Pro Max with and OtterBox Defender case. Organic supports are required. There is a separate ring part that is included in the model. This…
Built in camera of display is not covered. I used the slicer to make an additional slot for buttons on the left side of the phone. See images.
FIXED MagPowerstation Q820 - iPhoneSE podstavec k bezdrátové nabíječce iPhone SE je krátký a nefunguje bezdrátové nabíjení. Tento doplněk přizvedne telefon o 15mm a zfunkční bezdrátové nabíjení iPhone SE.
Koudelinek Iphone cestovní držák na nabíječku | Iphone travel wall holder for charger DEMO V2 Zbytečně velký otvor
Simple and quite chunky phone stand for monitoring my Prusa Mini. Printed with Polymaker Polylite PETG
Simple and elegant stand made for the Apple Magsafe charger. Easy to print in place. UPDATED for both new 2024 and old 2020 magsafe charger versions. Idea Inspired by the Twelve South Forté stand used by Apple to showcase the new StandBy…
iPhone 16, iPhone 16 Plus, iPhone 16 Pro and iPhone 16 Pro Max cases Print it in TPU for maximum convenience. If printed without top and bottom layer, it will be easier to peel from the print bed. Check my other models for even better…
A Christmas Update | V4 is Here! 🎄 12/09/2024 This update marks the final version of my iPhone Standby Dock Remix, and I couldn’t be prouder to share it with you all. Creating this has been a monumental task—I went through and completely…
Modular Desk Organizer System – Standard Set This Desk organizer design includes four interchangeable components sized to fit together naturally. The set consists of a Classic Phone Stand , Pen Holder Module , Storage Cup Module and a…
These are four to scale models of the new iPhone 12 (12 Mini, 12 Pro, 12, 12 Pro Max). They are perfect if you want to check which size fits into your pocket. Print instructions I have printed the models upside down and standing with a…
iPhone 17, iPhone 17e, iPhone 17 Air, iPhone 17 Pro and iPhone 17 Pro Max cases Print in TPU of your choice with SNUG type support at 30 degree overhand threshold. Two variants available - thin with camera border and regular (thick) -…
The charging cable can be used while in the stand. I use an Apple leather case and that fits good. Printed on the side. No supports needed!
My dbrand grip case broke and I don't really want to get another one because they are expensive. I made this model based off of the dbrand grip with a couple of my own touches. You can expose the infill on the bottom to create a unique…
Description Simple form, easy to print, no supports Disclaimer: This charger is designed to fit only the original Apple chargers *2025-02-10 Big Update. Currently Apple released 2025 a new charger (Ø 55,5mm and a height of 4,37mm). The…
A simple stand for iPhone 11, 12, 13, 14, 15 and 16. I use an Apple leather case and that fits good. Cutout in the front to still be able to swipe up. I added a second version for those who use an apple wallet on thier phones Printing…
These models are from the (new) iPhone 14 Pro. The .obj file is for renders. (Usdz file is available but i couldn’t upload it here.) The .3mf file and stl are for 3D printing. If you just want your dummy in one single color, then you can…
This 3D model was originally created by Scott Yu-Jan and is shared under the CC BY-NC 4.0 license. You can find the original file on Makerworld: https://makerworld.com/en/models/615378#profileId-538769 License:…
I use an Apple leather case and that fits good. If you look for a stand where the charging cable can be used: https://www.printables.com/model/401057-iphone-stand EDIT : I added a second version for those who use an apple wallet on thier…
Case for the iPhone 13. It has grips on the side to help prevent drops. Fits the regular iPhone 13 only. Designed for PLA/non-flexibles.
This is a relatively easy to print phone case for the iPhone 15 Pro Max so you can protect your shiny, new, titanium phone. The case consists of two pieces: the case and the camera guard. Print the case in TPU or other flexible filament,…
I took the iPhone 13 CAD models from Front Page Tech and 3D printed them! I converted the STEP files to STLs then printed them out on the Prusa Mini in Red Prusament. The original STEP files along with my exported STLs are included. My…
This model was drawn in Fusion 360 based on the actual iPhone 17 Pro Max technical drawing. The model measures 163.43 mm in height and 77.98 mm in width. The model includes the power button, volume buttons, action button, microphone and…
UPDATE 1 Added Case model with Honeycomb pattern on the frame ______________________________________________________________________ This Case consists of the main cover and a mini bumper for the cameras that fits between the iPhone 13…
IPhone 15 pro case. should be printed in tpu.
Simple case for iPhone 13 Pro Prints easily with PETG or PLA
I designed this case for my iPhone 14 Pro Max when I first got it and was waiting to buy a regular case. I printed this in Ninjaflex TPU (85A shore hardness) which works well. Something in the low 90A scale would be better in my opinion…
Printed in TPU with a 0.6mm nozzle. You may need to slide a knife along the top of the buttons to free them from the case. Use your slicer to create the pattern on the back using infill only with no top or bottom layers for the bottom. I…
iPhone Halter für iPhone 12/13/14/15/16/17 Pro in Verbindung mit dem MagSafe Ladekabel. Durchgangsloch zum Herausdrücken des MagSafe. Bei bedarf mit einem doppelseitigen Klebeband auf dem Tisch fixieren. iPhone stand for iPhone…
I don't know if this counts as a remix, but I believe in giving credit when it's due. I printed and used Leo DIY's case. The print came out great and the case fit well, but I had a hard time pushing the lock and volume buttons. I used his…
Remix of https://www.thingiverse.com/thing:4946346 to make it compatible with the IPhone 11 Print Settings Rafts: No Supports: No Resolution: 0.15 Infill: 100% Filament: 3DJake TPU Orange Category: 3D Printing
Feel free to like and share your make!
I mean I was gonna make just one entry for new iPhone lineup but Apple chosen to 🦆 the naming scheme. here you go brand new iPhones 17, 17 Pro and 17 Pro Max If you’re looking for rest of iPhone 17 models (I mean Air) check link bellow ⤵…
cover for iPhone 14, material TPE/TPU, layer height 0,2mm, no full top or bottom layer, honeycomb filling
Gona make your own holder or case for your new iPhone? Maybe you want to see how it look before order starts? I printed flat @ 0,1 layer height
TPU 95A Buse : 0.4 mm Wall : 0.4 or 0.8 mm Infill : 5% 2 versions : 1 thick (3.5 mm) 1 thin (2 mm) I added an other version with larger holes to press buttons. I encourage to download these version. The idea is to create a soft material…
This is an iPhone 15 case. I haven’t tested it yet but I aim to test it the next few days. If you make it and test it, please tell me in the comments if it fits or not.
This REMIX Was made to fit an iPhone 13 pro and an iPhone 14 with a standard case. This may fit other iPhone models, but will need to test it at your own risk. DISCLAIMER: Please be careful when ejecting your iPhone. Always have your…
This cellphone stand is designed for iPhone's and features corresponding recess for power- and AUX-Cables. Printing Recommendations: 0.2 mm layer hight, supports needed (touching buildplate), 15 % infill. Print from PLA will work fine and…
This model is free. If you appreciate this model, please leave a download and a like! iPhone 14 Pro and iPhone 14 Pro Max. Stylized dummy phones to see if it fits in your pocket/purse/bag/jacket. Based on measurements and reference images…
This self-designed flexible case fits perfectly on the Apple iPhone 13 pro (iPhone 14 pro version included as well). It offers precise cutouts and covered buttons that are easy to press. I had to experiment with the print settings quite a…
I'm not too fond of cases that cover the entire back so this one will still work with a MagSafe charger. You will need to flip the case 180 degrees on the print bed so that the phone back lays on the print bed. No supports or brims…
![Cable Repair and Protect for iPhone and Samsung [lightning+usbc]](https://media.printables.com/media/prints/590112/images/4827822_b916b887-676b-4723-b0c9-90881c40951e_31bb8182-a7ba-4745-adfd-b9d44646baac/195cfe9b-40fc-4570-b695-c540798fc979.jpeg)
![[REMIX] Apple iPhone and Apple Watch MagSafe Charger Stand](https://media.printables.com/media/prints/748344/images/5843757_96adb8ec-d4f2-4d0c-8a9c-390626287b93_902c324c-9d83-4b43-93e8-790fe15cff64/img_2547.jpg)
