16,430 models
This is a simple display stand for Dummy 13 and other 13 Series figures. The stand consists of a base and two arm segments. You can then choose an adapter for your model from the included files. For best results, use ABS or PETG filament.…
Print approx. €0.98–€1.20 excl. taxPreliminary estimate for PETGSource material: PET
Two versions of the a display shelf that have customizable “grills” (or support walls). Notes: If printing this on a Prusa MK3S+, then the .stl files MUST BE SCALED to 85%. The grills were designed to snap in place without the need of…
Print approx. €0.77–€0.94 excl. taxPreliminary estimate for one variant
This split-flap display sets itself apart by being almost completely 3D-printed. The flaps are printed by changing the color mid-print and mid-layer. The case is also completely 3D-printed. Video of the display in action (with sound):…
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
These two models can be combined to make as large or as small as a display area as you need. Both being based on the same hexagon base, they fit together perfectly. Print as many as you like and display all of your awesome prints and/or…
Print approx. €2.88–€3.52 excl. taxPreliminary estimate for one variant
This is a Modular and multi-size tape dispenser. I first designed this as a single size (3/4in) non modular dispenser, held together with screws. The comment I got the most was : were are the other sizes? I refined the design, corrected a…
Print approx. €1.02–€1.25 excl. taxPreliminary estimate for one variant
***UPDATE*** I've had a couple of suggestions come in (thank you @Roman_1037762!) that I'd like to implement over the next couple of days. The first of which is a clockwise flow for folks south of the Equator. Or maybe you just have a…
Print approx. €11.13–€13.60 excl. taxPreliminary estimate for one variant
This is a Hot Wheels / Matchbox 1:64 scale model of a 4-post car lift for displaying different size diecast cars. This is a remix of EG3Dprinting's 1:24 scale for Hot Wheels 1:64 scale. These snap together so you don't have to worry about…
Print approx. €0.66–€0.80 excl. taxPreliminary estimate for one variant
The 3D modelled Solder Paste and Flux Dispenser is a compact and efficient device, perfect for electronics assembly. Its ergonomic design makes it easy to use, with adjustable dispensing volumes ensuring accurate and consistent results…
Print approx. €1.60–€1.96 excl. taxPreliminary estimate for one variant
The provided part is the official MINI Display Case modded with an integrated USB port. I tried to implement the new feature in the already present design language from Prusa. The mod uses the latest R2 Version of the model. (R8 for the…
Print approx. €2.78–€3.39 excl. taxPreliminary estimate for PETGSource material: PET
Trash bag dispenser Can hold a roll of 35L bags or any roll of bags with 6cm diameter and 15cm height/length 2 screw holes Easier to print bottom chamfer than on the original model Remixed from Augustas Kazlauskas fine Trash bag holder to…
Print approx. €3.45–€4.21 excl. taxPreliminary estimate for one variant
The source marked this model as adult content.
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
14 Infill Samples with a case. Everything can be printed on a Prusa MINI . Simply download the 3MF file to PrusaSlicer and change the printer type. I had great success printing them in batches of 2 at a time (split left and right) and I…
Print approx. €1.00–€1.22 excl. taxPreliminary estimate for one variant
Holds 10 rolls of bags and has screw holes to be wall mounted, or use two sided tape/Command Strips to attach. Bag rolls are about 30mm in diameter and 61mm wide, so this dispenser might work with others. Initially designed without the…
Print approx. €8.50–€10.39 excl. taxPreliminary estimate for one variant
Battery dispenser for IKEA Skadis Board. Holds up to 11 AA & 11 AAA batteries. There is also version only for AA batteries .
Print approx. €2.69–€3.29 excl. taxPreliminary estimate for PETGSource material: PET
Simple circular holder - fits most challenge coins. Quick print, no supports. Small footprint.
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for PETGSource material: PET
Battery holder / dispenser / box / organizer / storage for AA and AAA sizes. 35 pcs for AA 40 pcs for AAA Please download this file, because it depends on how soon I will get a new product and be able to create new models. This is my…
Print approx. €4.28–€5.23 excl. taxPreliminary estimate for one variant
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as it gives the best…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
Hello fellow makers, I assembled the Lego model of the dune ornithopter as soon as it arrived, and realized quickly that it is too big to stand on top of my IKEA Kallax shelf with the landing gear down. Although a beautiful pose, I wanted…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
Wanted a single piece print for the can dispenser, and just placing the parts together in prusaslicer was leaving wall lines in the part where the connectors were, so reworked it in fusion to make each side be a single part with no…
Print approx. €5.66–€6.91 excl. taxPreliminary estimate for PETGSource material: PET
Nuka Cola Dispensary / Vending Machine. Make it into a piggy bank. Or use it in the dice tower contest. I find this model very satisfying to look at. I think I am a sucker for Nuclear Age style artwork.
Print approx. €19.01–€23.23 excl. taxPreliminary estimate for one variant
Stores individually wrapped tea bags vertically with display bag visible. Easy to pull from bottom with generous fingerhole cutout at front and bottom. Holds approximately 1.5 boxes of tea. When stocking tea bags, reverse half of them 180…
Print approx. €8.87–€10.84 excl. taxPreliminary estimate for PETGSource material: PET
I need to store several toilet rolls in my toilet. Therefore, this project was designed. The dispenser is capable of holding four toilet rolls. Simply put toilet rolls into the dispenser from opening on the top, the rolls will drop to the…
Print approx. €2.93–€3.58 excl. taxPreliminary estimate for one variant
This is a Hot Wheels / Matchbox 1:43 scale model of a 4-post car lift for displaying different size diecast cars. These snap together so you don't have to worry about extra hardware or glue. I've added added a wheel chock near the front…
Print approx. €1.62–€1.98 excl. taxPreliminary estimate for one variant
Compact Capsule Filler with Credit Card Mixture Dispenser This compact capsule filler is designed to fill 24 capsules of size 00 in one batch using a credit card as a mixture dispenser. The capsule filler is made up of three functional…
Print approx. €4.84–€5.92 excl. taxPreliminary estimate for one variant
Display stand for your Game Boy Advance Print Settings No special settings are required. Print time is typically 2 ½ - 3 hours. Buy Me A Coffee The following filaments were used in the pictures above: Prusament Galaxy Black PLA
Print approx. €2.29–€2.79 excl. taxPreliminary estimate for one variant
A nice case for your 7" Raspberry Pi Touch Display 2 (https://www.raspberrypi.com/products/touch-display-2/ ) and a Raspberry Pi. Features easy access to the USB and Ethernet ports. Designed to use the M2.5 x 6mm screws included with the…
Print approx. €5.70–€6.97 excl. taxPreliminary estimate for one variant
Case for Raspberry Pi Touch Display 2 with housings for the Raspberry Pi 3 (B/B+), 4 and 5. Updates 2025-08-11: Various models revised, the thread for the screw connection between the display case and the stands is M2.5 and not M3.…
Print approx. €0.82–€1.00 excl. taxPreliminary estimate for PETGSource material: PET
Case & Brackets (2020 Extrusion) for 16x2 1602 LCD Display Screen Blue + IIC I2C Module https://amzn.to/3LPVWNE
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
Simple yet very effective display stand for tech decks. Makes a great present. If you plan to hang it on the wall I recommend using 3m command strips. If you plan to stand it up I recommend adding a stop to the print script right before…
Print approx. €5.43–€6.63 excl. taxPreliminary estimate for one variant
This is a tape dispenser for the Gridfinity modular storage system. It is compact at 1x2 squares, and features cutting teeth that split tape effortlessly. It is not possible to stack other blocks on top. This takes standard 2 inch tape…
Print approx. €3.53–€4.31 excl. taxPreliminary estimate for one variant
Printed this for a friend's daughter, who loves both dinosaurs and skulls. This model was a win! Using https://www.printables.com/model/19871-t-rex-skeleton-fixed-and-printable I printed only the skull at 200% but then realised I could do…
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant
Ergonomic Solder Paste or Flux syrynge extrudes dispenser extruder Simple but effective and comfortable to use, large surface area touching the plam of your hand Easy to print Print instructions print oriented with flat surface to bed (…
Print approx. €1.83–€2.23 excl. taxPreliminary estimate for PETGSource material: PET
Pill Dispenser is a device to help people to remember to take medication as required, on an hourly or daily basis. A simple pill dispenser allows people to gain access to the pill at any time. The dispenser includes 3 single doses of…
Print approx. €5.70–€6.97 excl. taxPreliminary estimate for one variant
Notes Fits my display stand for the Atari Lynx II in height and vertical angle.
Print approx. €2.78–€3.40 excl. taxPreliminary estimate for PETGSource material: PET
Left and right hemispheres of the brain of Rajat Jain (25) obtained with an MRI scan and used in UCSF's and UCSD's glassbrain project. I got the 3d files from the National Institutes of Health 3D Print Exchange web site. There are two STL…
Print approx. €15.27–€18.66 excl. taxPreliminary estimate for one variant
Harley-Davidson Poker Chip connectable frame. Great for those collectors! chips are magnetic with thin metal in the middle There are pegs and holes on each side of the pieces to hold them together. These pieces connects together into a…
Print approx. €3.01–€3.67 excl. taxPreliminary estimate for one variant
Following the original recommended print setting For PLA/PLA+ (0.2 Layer + 3 Walls + Infill 15%) Support depends on the orientation of the prints. The GCode files have enforce support for only the U shape part.
Print approx. €3.80–€4.65 excl. taxPreliminary estimate for one variant
This is a snap-fit case for the Adafruit 1.8 Color TFT LCD Display with MicroSD Card Breakout, ST7735R. This case is designed to be snap-fit together, not requiring any screws. Please check to see if this fits your display before printing…
Print approx. €0.83–€1.02 excl. taxPreliminary estimate for one variant
This Time Circuits Display has been meticulously reproduced to be as accurate as possible to the movie. Once assembled with electronics, everything sounds and functions just like in Back to the Future. The "Present Time" is also a real…
Print approx. €21.41–€26.16 excl. taxPreliminary estimate for one variant
PSA: State of AI : Dragon Egg : With and without Displacement TRIPO used to create : “Cute Baby Dragon hatching from egg, realistic, masterpiece, HDR.” used HD texturing option We have entered a state wherein the use of displacement with…
Print approx. €6.29–€7.68 excl. taxPreliminary estimate for one variant
I couldn't find a “key” that had both parts on it, so I sketched this one up
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
A simple HDMI display / monitor cable organizer. it's a quick print (takes 50min) but yet helpful to tidy around a display. Just stick it on the backside of your display using some double sided tape. A small slot is made to clip a slim…
Print approx. €0.79–€0.97 excl. taxPreliminary estimate for one variant
No unscrewing, just print and click. 100% Prusa guarantee safe. In the meantime I have made a small adjustment so that the back clamps better. The original is Display_backsite_mini+ The modified version is Display_backsite_mini_New The…
Print approx. €1.12–€1.37 excl. taxPreliminary estimate for one variant
Text is printed separated and inserted in, made for a cleaner product. Recommended printing in a PLA Silk for the best results. Text is printed upside down (only if you have a smooth print surface). Print files are customized temperature…
Print approx. €0.30–€0.36 excl. taxPreliminary estimate for one variant
I have made updated model with lid and viewing ports, check it out: New version I present to you fully parametric boxy things dispenser - originally meant for dishwasher tablets. You can use it of course for anything with boxy shape.…
Print approx. €3.21–€3.92 excl. taxPreliminary estimate for one variant
First of all thanks to Ljhtom for this amazing design! The drink dispenser large Description: This dispenser was updated to deal with half liter cans (65mmx168mm) instead of the small ones. I also seperated some pins from the original…
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant
The most meticulously organized Lego Star Wars collection A complete list of 55 Star wars factions available to download: At Attin Black Sun Bondsman's Guild/Bounty Hunters Churches of the Force CIS Separatists Clan Djarin Clan Fett…
Print approx. €3.14–€3.84 excl. taxPreliminary estimate for one variant
Monkey Skull Chalice. HOW TO VID.
Print approx. €14.90–€18.22 excl. taxPreliminary estimate for one variant
Solder paste dispenser. Solder paste is squeezed out when you push solder paste tube down. Infill 15% is enough except for axis.stl. I suggest use 100% infill there. Printed in PETG, but PLA should also work fine.
Print approx. €4.57–€5.59 excl. taxPreliminary estimate for PETGSource material: PET
I had trouble stuffing the cable Prusa display ribbon cable in the 30mm extrusion during assembly. I thought up a ribbon cable holder that fit the extrusion. So I made one as my first test of Atom3D and Prusa design to print process. Made…
Print approx. €0.81–€0.98 excl. taxPreliminary estimate for one variant
A little Display stand for Crystals or Stones or what you want ;) You can slice it to the size you want to fit it for your needs.
Print approx. €0.54–€0.67 excl. taxPreliminary estimate for one variant
I created that shooting patch dispenser to replace the standard paper patch dispenser while they get wet and don't work very well after a while. In case the lid is not holding as expected, a small tesafilm strap can be used to secure body…
Print approx. €1.60–€1.96 excl. taxPreliminary estimate for PETGSource material: PET
I remixed the base of Cat Toy - Treat Dispenser Puzzle to use less plastic and reduce print times and print complexity. I also incorporated a spiral to act as a slow-feeder and increase cat engagement. Prints with a 0.4mm nozzle at 0.25mm…
Print approx. €7.06–€8.63 excl. taxPreliminary estimate for one variant
Place a rubber mat behinde the mount and under the hooks. Then the Display is secured from scratches and the mount is not moving. Take superglue to put the two models together.
Print approx. €1.91–€2.34 excl. taxPreliminary estimate for one variant
Created a remix of this design. Main difference is that the original design was intended to be fitted below the top, while I wanted to mount it on the door. That resulted in a modified design. I used double sided tape to fit the holder.…
Print approx. €12.92–€15.78 excl. taxPreliminary estimate for one variant
This is a display holder for the Cali Cat that can be joined together to form a matrix of cats for individual display or a grid for filament reference! For more info: You will need to print the "keys" with a brim. I've included two files…
Print approx. €0.75–€0.92 excl. taxPreliminary estimate for one variant
Om dat mijn zoon last heeft van de Aziatische hoornaar liet hij mij een Aziatische hoornaars val zien met wat uitleg. Zo ben ik dan begonnen met te tekenen, en printen. De val kan maar begin volgend jaar getest worden. De aanvallen…
Print approx. €0.77–€0.95 excl. taxPreliminary estimate for one variant
Took the base of the Nutella Candy Dispenser from Sui77 and removed the threads, I then added new threads and raised them up to fit a regular mouth mason jar. I have also added a wide mouth version. 0.2mm layer height, 20%infill, 2 walls.…
Print approx. €11.25–€13.75 excl. taxPreliminary estimate for PETGSource material: PET
If you like the idea of the project then please do like this Printable using the heart button above. It helps me to create new projects. Thank you. Build a large and very bright seven segment display to show numbers, words or animations…
Print approx. €0.43–€0.52 excl. taxPreliminary estimate for one variant
This is a display stand for the F22 Remix model found here . The display stand base can be printed at 1:1 scale, The stand tower needs supports so that the lip around foot is supported during printing. The F22 model needs to be printed as…
Print approx. €1.98–€2.41 excl. taxPreliminary estimate for PETGSource material: PET
What? A onehand operated tool that can squeeze a stick of churu or whatever liquid pet treat you wish, into a spoon that can be slotted into the device. Much like the ones you find on amazon: Why? You need the other hand to groom or wash…
Print approx. €12.84–€15.69 excl. taxPreliminary estimate for PETGSource material: PET
I like this design. I wanted one for my garbage disposal side, but the dimensions were not right. I didn't want to scale it, so I created a Fusion 360 design using the eyeball method. The design (included) is set for 85mm diameter and…
Print approx. €2.05–€2.50 excl. taxPreliminary estimate for one variant
A small display shelf I created to display some custom circuit boards for a tech expo. Two-piece design.
Print approx. €3.30–€4.03 excl. taxPreliminary estimate for one variant
My Bosses-Boss threw me a 20 dollar bill and handed me the Apollo-11 5 OZ 50th Anniversary Coin and told me to make him a display for it. After about an hour I came up with this. Link to the coin…
Print approx. €8.87–€10.84 excl. taxPreliminary estimate for one variant
Push and twist right in place. Sits firm in place for no wiggle or movement. Holds in from the 9mm hole in the back of the Benchy. Holds 7-3 Benchys Screw/Tape option (4mm Screw Hole) 20%infill No supports STEPS: Rotate Benchy to the…
Print approx. €1.47–€1.80 excl. taxPreliminary estimate for one variant
Print “Lego_Stud_Diameter_Test” first, test it and choose the right diameter size for your display stand models. Every display stand model comes in three different stud diameters (4,9mm 5,0mm 5,1mm) and in two versions (stud compatible…
Print approx. €0.37–€0.46 excl. taxPreliminary estimate for one variant
Update 1 : Description update Use case I created this model because the cardboard of the stickers rarely resists more than one shooting session. Impression The part can be printed in PLA/PETG. Please give this design a like if you like…
Print approx. €1.17–€1.43 excl. taxPreliminary estimate for PETGSource material: PET
This is a simple little Opening Tool e.g. to: remove phonedisplays open laptops/notebooks/tablets,… open/remove car parts remove E-cigarette-tank-glasses/atomizers or other areas of application…
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for PETGSource material: PET
Easy to print and great to display books, phones, tablets, pictures or other … If you’d like to support my work, leaving a ♡ like ♥ or even buying me a coffee ☕ goes a long way. I love creating and sharing my designs, but my Mk2.5s is…
Print approx. €0.92–€1.12 excl. taxPreliminary estimate for one variant
“Gyro the Dodo - Ultimaker Special” is an awesome test print originally developed by an artist named Virtox to show off the capabilities of Ultimaker printers. After building my MMU3 and ordering some BVOH for soluble supports, I was…
Print approx. €22.14–€27.06 excl. taxPreliminary estimate for one variant
sturdy little 3-level diecast car display. Holds 6 cars total. also holds 15 lego minifigures with their stands perfectly can be used to display other things like spray bottles for your airbrush or mini utensils and screws etc…
Print approx. €5.64–€6.89 excl. taxPreliminary estimate for one variant
“Years ago" Inspired by all kind of clever solutions at the time, I designed a dispenser for 330ml cans which printed in only 4 pieces on my BIG 3D printer (~450mm x 450mm x450mm) which rests in piece ;-( Luckily the local brewery decided…
Print approx. €4.07–€4.97 excl. taxPreliminary estimate for PETGSource material: PET
Stackable display for 1:64 scale cars. Fits most models but will require re-sizing if the car you want to store is slightly longer or wider than the one's shown in the pictures
Print approx. €2.30–€2.81 excl. taxPreliminary estimate for one variant
For those of you who place solder paste on a PCB by hand using a solder paste syringe, this tool provides additional control and consistency to the application process. Parts Printed: Syringe Holder [A] Syringe Plunger [B] Knob [C] 1ml…
Print approx. €0.74–€0.91 excl. taxPreliminary estimate for PETGSource material: PET
Display for Ikea Skadis for little Resin Models and other little Ones.
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant
Der Klebefant hält immer etwas Klebefilm bereit und macht dabei auf dem Schreibtisch eine super Figur. Überall anders natürlich auch. Der Klebefilm ist so in dem Abroller befestigt, dass er nicht rausfallen kann, jedoch kinderleicht…
Print approx. €2.89–€3.53 excl. taxPreliminary estimate for one variant
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as it gives the best…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
This is an external housing that attaches to the front of the Official Prusa MINI enclosure. This design only works with the door hinge mounted on the left side. Required hardware: -3x M3x8 screws -1x M3 nut -Reuse the 4x M3 screws from…
Print approx. €5.29–€6.47 excl. taxPreliminary estimate for PETGSource material: PET
Artistic and ergonomic tape dispenser designed for office use. Compatible with usual office tapes. New GGvision studio creation.
Print approx. €1.99–€2.43 excl. taxPreliminary estimate for one variant
A simple and effective dispenser for laundry or dishwasher pods. Mounted to the wall with two screws or 3M Command strips. Supports on for the overhang in the mouth of the dispenser. I printed in PLA at 0.3mm Layer height, 2 Perimeters, 3…
Print approx. €8.40–€10.27 excl. taxPreliminary estimate for one variant
The thingies will sit snug and apply just enough force to the display cover to prevent most of the rattling. [update] Added slightly larger variant in case the small one sits too loose. How to Print No Infill No Top Solid Layers No Bottom…
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
I design this model for my girlfriend She wanted a pads dispenser to make more elegant than just letting the box of pad in the bathroom. The cap snap in the box, i have print both of them in PLA I have pretty big hand but the hole is well…
Print approx. €3.52–€4.31 excl. taxPreliminary estimate for one variant
I wanted to print a Case for my Pimoroni Pico Display pack 2.0. and couldn't find one that suited so I created my own. The case has a snapfit shell, buttons, led hole, and usb cable cutout. 14/06 I've added 2 additional experimental…
Print approx. €2.19–€2.67 excl. taxPreliminary estimate for one variant
Description This is a heavy tape dispenser, If you have never used one, a heavy tape dispenser allows you to pull tape from it using only one hand while the other is free to hold the thing you want to secure in place. The dispenser is…
Print approx. €12.51–€15.29 excl. taxPreliminary estimate for one variant
Frisbee disc with diameter 17.5cm. No supports are needed by printing the disc upside down.
Print approx. €3.66–€4.47 excl. taxPreliminary estimate for one variant
A simple snap fit case for a 2.8" ili9341 LCD display opened in the back might not fit all displays, as there are differences among different manufacturers, please check the basic dimensions of your display first.
Print approx. €1.54–€1.88 excl. taxPreliminary estimate for PETGSource material: PET
This comes with a slider for 0.5 mm beads but I can made additional sizes on request.
Print approx. €1.61–€1.97 excl. taxPreliminary estimate for one variant
This is a remix of https://www.thingiverse.com/thing:3592040 changing the drone LEM into a watch display for your Omega Speedmaster MoonWatch. I increased the scale and added a LEM cup to hold the watch in place. Omega has created a LEM…
Print approx. €7.13–€8.72 excl. taxPreliminary estimate for one variant
I designed this Amiibo display stand because many of the others online were either too large for my printer, or took way too long to print. It comes in two pieces, a stand end, and the main stand piece. You will need to print 2 stand…
Print approx. €1.64–€2.00 excl. taxPreliminary estimate for one variant
Für die Montage des xLCD (neuen Version) auf der Außenseite des original Prusa Enclosures ist ein Adapter notwendig da sich ansonsten die Türen nicht schließen lassen. Prusa stellt Adapter zum Download zur Verfügung ( Enclosure Printable…
Print approx. €0.86–€1.06 excl. taxPreliminary estimate for PETGSource material: PET
This is a remix of bpopp's design found on Thingiverse ( https://www.thingiverse.com/thing:2502868 ). I added a 22.5deg wedge to the back plate so it could fit on the end of my butchers block clearing the underside of my bench top. The…
Print approx. €2.26–€2.77 excl. taxPreliminary estimate for one variant
Designed swatches for Spinning Filament Swatch Display - Lifts Swatches from Brad @ FTBT 3D with text for filament type. Following swatches are available. PLA PLA+ PETG ASA PVG FLEX Printing Settings: 0.2mm layer height turn on ironing…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
Make your collection visible New version of TCG display is available collection https://www.printables.com/model/1490952-multiple-tcg-sports-cards-wall-holder-and-display SGC graded TCG spots cards wall holder and display frame.
Print approx. €0.75–€0.92 excl. taxPreliminary estimate for one variant
This new Iron Man Head remix is awesome for a desktop display! It includes a minimalist stand. It also just happens to fit a 600% Dummy 13 body by Soozafone. This Iron Man Head also includes a unique Eye Lighting Module. (ELM) Update; I’m…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant
small travel dispenser for Q-tips (~ 10 × cotton swaps ∅5×80mm)
Print approx. €2.45–€3.00 excl. taxPreliminary estimate for one variant
This model inspired by the beautiful Black + Blum One Handed Tape Dispenser (which is sadly no longer for sale as far as I can tell). This was quite challenging to recreate from the few reference photos I was able to find online, but I…
Print approx. €5.71–€6.98 excl. taxPreliminary estimate for one variant
This is a simple snap case for the Adafruit OLED Graphic Display (SSD1306) (.96") 128x64 character OLED display or any similar .96 display. The design is meant to be small/compact and snap closed. Only the standoffs are exposed. The case…
Print approx. €0.47–€0.58 excl. taxPreliminary estimate for PETGSource material: PET
Modular automatic small animal food dispenser for Mice, Rats, Hamsters, Degu chile... Dispenser has a base to which pipes of different lengths are connected. the length of the pipe determines the size of the tank for food. There are two…
Print approx. €8.95–€10.94 excl. taxPreliminary estimate for one variant
1/18 angled car display. suitable to get a bit more height and a nice angle to show off one of your models.
Print approx. €8.67–€10.59 excl. taxPreliminary estimate for one variant
If you have an Original Prusa Enclosure and you want to use a Raspberry Pi 3/4 and an original 7" Touch-Display with your MK3s+. You need the following: 4x M3 x 18mm Allen screw 4x M3 x 8mm Allen screw 2x M3 x 15mm Allen screw 6x M3 nut…
Print approx. €0.13–€0.15 excl. taxPreliminary estimate for PETGSource material: PET
