Search results: keypad

Sort order

274 models

P
PrintablesKhaosRipper

Nuki Keypad 2.0

Diebstahlschutz und Wandhalterung für das Nuki Keypad 2.0 Zusätzlich benötigt: 2x M5x16 2x Dübel und Senkkopfschrauben Anti-theft protection and wall mount for the Nuki Keypad 2.0 Additionally needed: 2x M5x16 2x dowels and countersunk…

Print approx. €4.78–€5.84 excl. taxPreliminary estimate for one variant

Downloads
1,143
Likes
51
Rating
5
P
Printables33fynhoj

Wemos D1 Uno (Arduino Uno) + 16x2 LCD keypad shield case - Bitcoin ticker

LCD control software on Github: https://github.com/janfitz/Arduino-Wemos-WiFi-keypad-shield-Bitcoin-ticker

Print approx. €0.56–€0.68 excl. taxPreliminary estimate for one variant

Downloads
255
Likes
16
Rating
0
P
PrintablesRoobieBoobieee

Single switch keypad

Keypad for a single switch. I will use it as a power button for my pc.

Print approx. €0.24–€0.30 excl. taxPreliminary estimate for one variant

Downloads
52
Likes
5
Rating
0
P
PrintablesPsravla

Cyborg Ergonomic Keypad

This is a reverse engeneered design of the Azeron Cyborg II. There are 30 programmable switches and one analog joystick. It runs on an Adafruit KB2040 board with an Adafruit MCP23017 GPIO expander for more pins to connect switches to. The…

Downloads
1,102
Likes
131
Rating
4.8
P
PrintablesBilliam

Sherbet gaming keypad

Warning I've made a couple of modifications to this since printing and have not tested them . I've added some clearance around the joystick so that it fits better, and the joystick cover now attaches with two screws instead of one.…

Downloads
782
Likes
162
Rating
5
P
Printablest0b1

Cover for 4x4 membrane keypad

Very simple enclosure for a 4×4 membrane keypad. Started as a test-print to check if I have the dimensions right. OpenSCAD files are included. Perhaps you find this useful for your own projects. Print instructions The screw holes are…

Downloads
599
Likes
67
Rating
5
P
Printablesjacek

Arduino LCD Keypad Shield Snap-Fit case

I made a case for LCD Keypad shield for arduino uno. The case holds on to the shield itself, so the shield can be detached from arduino togather with case. The buttons are integrated in the case itself (similar to reset button on prusa…

Downloads
535
Likes
48
Rating
5
P

NUKI - Keypad 2.0 rain protector add-on

https://www.printables.com/de/model/407133-nuki-keypad-20

Downloads
414
Likes
23
Rating
5
P
Printables3D-Fab.ZERO

SwitchBot Keypad Touch Cover

The switchbot keypad touch will be very comfortable. However, you can tell at a glance that it uses Switchbot from its appearance. By attaching this cover, it is difficult to understand that it is a switch bot at first glance.

Downloads
370
Likes
28
Rating
5
P
Printablesadcurtin

Cover with passthrough close button for liftmaster / chamberlain 877LM garage door keypad

My garage door keypad, an 877LM, can close the garage door just by pressing the enter button, no code needed. When I walk the dog, or take a car not parked in the garage, I want to easily close the door on the way out, and was annoyed…

Downloads
322
Likes
34
Rating
5
P
PrintablesJGW

Slim 6 Key Macro Keypad

Recent updates 2021-06-29 Here's an Autohotkey example to send the name of the active window to the Arduino 2021-06-12 added the very basic Arduino Sketch 2021-06-08 first upload. Files: V0 6-Key super slim Macro KeyPad Proudly designed…

Downloads
289
Likes
94
Rating
4
P
PrintablesThinner42

4x1 Macro Keypad

Required hardware Raspberry Pi Pico (RP2040) microcontroller board USB cable (as it has to be cut and soldered a USB 2.0 is preferred, because it only has 4 wires) 4x Cherry MX key switches or other with similar size 4x Keycaps (or print…

Downloads
288
Likes
52
Rating
5
P
PrintablesThe3DHobbyist

Ring Alarm Keypad (Gen 2) Wall Mount

This model is a direct replacement for the wall mount that comes with a Ring Alarm Keypad (Gen 2). I created this model so that I could affix the mount using mounting tape on brick without ruining the original piece. I have also use this…

Downloads
287
Likes
20
Rating
5
P
PrintablesILAN SABAR

NUKI KEYPAD 2 ENCLOSURE

COMPACT AND ELEGANT ENCLOSURE FOR THE NUKI KEYPAD 2. Screws hidden on top + bottom for a cleaner look. Additional parts needed: Qty 2: M3x10 flat head screws (suggested with T10 torx drive) Qty 2: M3 Nyloc nuts. These nuts should be…

Downloads
280
Likes
19
Rating
5
P
PrintablesWowe

Nuki Keypad 2.0 Cover

As I only use the fingerprint sensor of my Nuki Keypad 2.0 and it is attached to my white frontdoor, I wanted it to have a less obvious appearence. So I designed a piece that covers the whole device except the fingerprint sensor and has…

Downloads
224
Likes
17
Rating
5
P
PrintablesMcTech3D

25 Button MACRO Keypad

25 Button MACRO Keypad - controller with an Arduino Pro Micro. Uses keyboard switches, a reset button, and a LED. Summary: I designed this to be able to assign keyboard shortcuts for different software that I use on a regular basis. This…

Downloads
201
Likes
60
Rating
5
P
PrintablesJoachim

4x4 Matrix Keypad Enclosure

Small enclosure for the 4x4 Matrix Keypad. The case is 78 mm wide and 77 mm long. The total height of the case is 21.5 mm where the bottom is 20 mm. Hole for wires at the bottom, being 10 x 20 mm. Lid is snap fit, so you it can be a bit…

Downloads
187
Likes
8
Rating
0
P
Printablesblockdyor

Aqara U200 Keypad Anti-Theft Security Cover

The Aqara U200 is a newly released retrofit smart lock, but its keypad design presents a significant security flaw. The keypad can be easily removed and stolen due to a release pinhole that allows anyone to detach it from its wall mount.…

Downloads
184
Likes
11
Rating
0
P
PrintablesJeff

Pimoroni Keypad Case

Angled case for the Pimoroni Raspberry Pi Pico RGB Keypad. Print Settings Printer: Geeetech Prusa i3 Pro C Rafts: No Supports: Yes Resolution: 0.2mm Infill: 20 Filament: eSun PLA Silver Category: Electronics

Downloads
184
Likes
21
Rating
5
P
PrintablesJimbob

Pimoroni Pico RGB Keypad case

A case for the Pimoroni RGB Keypad. Aiming to use it as a macro pad. My thoughts on where to go next... a display? Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.2mm Infill: 20% Filament:…

Downloads
181
Likes
18
Rating
4
P
PrintablesJon Lê

BookKeyPad - A MacBook-like stand for the Magic Keyboard and Magic Trackpad

Overview The BookKeyPad is a stand that positions the Magic Keyboard and Magic Trackpad together like a MacBook. The name pushes the words together just like the 3D model does to the accessories. The stand tilts both Magic Devices so they…

Downloads
181
Likes
22
Rating
0
P
PrintablesPoke2

Mounting plate for Nuki Keypad v2 screw montage

Nuki Keypad v2 only comes with a mounting plate with adhesive strips. But I would like to mount it on a wooden stand on which the paint is already peeling off. I think screwed is maybe better. For the print I chose PETG with 0.1mm layer…

Downloads
179
Likes
18
Rating
5

Arduino panel for 16x2 display and 4x4 keypad

This is operator panel i designed to my custom control system and already used it in few projects. You can use i2c expanders to make it ultra easy to hook up with only 4 wires. Keep in mind that you have to solder keypad expander exactly…

Downloads
168
Likes
16
Rating
0
P
PrintablesStefan

Switchbot Keypad Touch cover

My switchbot keypad touch is attached outdoor to the garage door, unfortunately the fingerprint sensor doesn't work if it gets wet, for example due to rain. This cover protects the sensor from rain and other weather influences. A bolt is…

Downloads
167
Likes
15
Rating
0
P
PrintablesBergi

Case Nuki Keypad 2.0

Da mir das Keypad ein wenig zu schnell von der mitgelieferten Halterung zu lösen war, habe ich eine eigene gezeichnet. Alle Knöpfe und der Fingerprint Scanner lassen sich weiterhin gut erreichen und bedienen. Lochdurchmesser für die…

Downloads
158
Likes
11
Rating
5

False security keypad

Our engineer at SSS (Superficial Security Services) has put in many hours, to bring you the FridgeShield . By using state of the art technology (FreeCAD) to turn shape strings into sketches and fiddling with attaching them to a datum…

Downloads
147
Likes
46
Rating
5
P
PrintablesSchlachtschiff

4*4 Matrix 16 Keys Button Keypad Keyboard Case

This is a housing for the 16 Keys Button Keypad Keyboard Case. Das ist ein Gehäuse für das 16 Tasten Keypad Keyboard…

Downloads
147
Likes
18
Rating
2
P
PrintablesGila

Nuki Keypad 2.0 wall mount / theft protection

All models don't require any supports. It's best to print the holder face down, as the STLs are already oriented that way. The Cover has two variants one with modelled threads and one with space for heat set inserts. The Holder has 3…

Downloads
144
Likes
16
Rating
0
P
PrintablesJohnFajardo

Arduino Uno Keypad shield case

This is an alternative case for LRT Pro Timer Free . It holds an Arduino Uno with a keypad shield plus a 4xAA battery holder but can also be used as a general purpose case for the aforementioned hardware. The original one is fine, but I'm…

Downloads
141
Likes
11
Rating
0
P
PrintablesMrR0b0t0

Uplift Desk Keypad Headphone Hook

This is a headphone hook that utilizes the pilot holes surrounding the comfort keypad that comes with the Uplift sit/stand desks. This will only work with Advanced Comfort Keypad (…

Downloads
133
Likes
32
Rating
4.5
P
PrintablesMikeFlier

Arduino Keypad holder

A simple holder for the Arduino keypad for use while working on projects. Remixed from Solar Germany https://www.thingiverse.com/thing:2947573. Simply enlarged the channel on the base piece and then added button knobs in the top to secure…

Downloads
130
Likes
21
Rating
0
P
PrintablesGizmoGorilla

VFD Keypad Mount for Masso Controller

VFD Keypad Mount for Masso Touch controller: With permission from PwnCNC I'm posting these mods I made to the VFD keypad mount. The original size of the mount for the keypad has not changed, only the back plate size. How well this fits…

Downloads
128
Likes
12
Rating
0
P
PrintablesAdafruit

Lemon Keypad

Lemon Keypad on YouTube https://youtu.be/qPjJ2EhG8aY DIY USB-HID With a Twist of Lime Make a custom USB-HID keypad in the shape of a citrus fruit. This keypad features six mechanical switches for controlling media players like Spotify,…

Downloads
126
Likes
127
Rating
0
P
Printablessagarg119

Ring Security Keypad Wall Plate

This was a remix I created to fit the hole configuration and size I needed. I had a previous security system that had very large keypads and I adjusted the sizing to cover up the existing hole from those keypads. The hole configuration I…

Downloads
121
Likes
10
Rating
0
P
PrintableszTemmu

Ring Alarm Keypad (2nd Generation) Stand

This model is a countertop stand for Ring Alarm Keypad (2nd Generation). Features: Keypad securely stays in place via friction, while presenting keypad at a raised + angled position for easy interaction. Large cavity to store excess…

Downloads
121
Likes
9
Rating
0
P
PrintablesMaker Melissa

YL620A VFD Panel Mount KeyPad Holder

Designed this VFD KeyPad Holder for the YL620 available on AliExpress. This fits in the same size hole as the original part, but the dimensions have been updated for the keypad. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts:…

Downloads
118
Likes
8
Rating
3
P
Printablesplasmata

Ring Keypad V2 Wall Plate

An escutcheon to go behind a Ring keypad v2 to hide old screw holes and such.

Downloads
116
Likes
10
Rating
0
P
PrintablesFlipper3DPrints

Arduino Keypad Servo Motor Safe

Print with Support in PLA with nozzle at 220C and bed at 60C Instructables Link for parts and assembly process https://www.instructables.com/Arduino-Servo-Motor-Keypad-Safe/

Downloads
116
Likes
19
Rating
0
P
PrintablesChristian

Nuki Keypad V1 Wandhalterung/Rahmen/Diebstahlschutz/Befestigungshilfe

Wandhalterung und Rahmen für das Nuki Keypad V1. Es dient als Diebstahlschutz und zur Befestigungshilfe, wenn ein Kleben nicht möglich oder erwünscht ist. Es wurde bei mir mit 2 Edelstahlschrauben an die Wand geschraubt. Gedruckt mit PETG.

Downloads
115
Likes
7
Rating
0

keypad 3x4

https://www.tinkercad.com/things/5NlhpHQDfab-keypad-3x4 bought @ https://www.vanallesenmeer.nl/3x4-12-Button-keypad

Downloads
113
Likes
7
Rating
5
P
PrintablesLappy

Worlds Cheapest MIDI Controller Keypad

Here we have the "Worlds Cheapest MIDI Controller" based on an Arduino Pro Micro and a 4 x 4 Keypad, it can be built for about $6. I wanted something quick, simple and easy to use with a software sampler to trigger stings while recording…

Downloads
111
Likes
21
Rating
0
P
PrintablesAndreas Känner

Badger 2040 Keypad

The Badger 2040 keypad is an inexpensive programmable USB macro keypad with keymap display. The firmware is based on CircuitPython and can be easily extended by yourself. If you just want to customize key bindings, you don't even need to…

Downloads
110
Likes
39
Rating
0
P
PrintablesBecca

Raspberry Pi Pico W Home Assistant Keypad

I wanted a keypad that could be used to set various scenes in home assistant, without requiring software on my laptop. The Pi Pico is secured by 2 M2 screws (and optionally some hot glue), and the lid snaps onto the body. I am using…

Downloads
109
Likes
59
Rating
5
P
Printableschewiedies

Eternal Keypad v1.2 Gasket Mount Case w/ Optional Tenting

This is a gasket mount case I designed for the Eternal Keypad v1.2 that adds optional tenting via heatset threaded inserts. The case design incorporates all the plates (FR4 switch plate on top and FR4 or acrylic on bottom). There is a…

Downloads
108
Likes
9
Rating
0
P
PrintablesRyan

Mini HID Keypad

Mini Keypad used as HID for computer. Customize to work with any computer. For a complete listing of character maps, do a simple search for "ASCII character map" Print instructions Only requirements are an Arduino Pro Micro (I used a…

Downloads
106
Likes
19
Rating
0
P
Printablesdreamersdoor

rp2040zero 4x5 macropad keypad

example printed in creality petg use m3 screws. body is resistant to overtightening but avoid doing so to preserve part durability if you need help flashing or building firmware comment

Downloads
106
Likes
34
Rating
5
P
PrintablesLewis Bryant

Breadboard+LCD+Keypad

Im Learning about Breadboards and Arduino and was getting sick of Arduinos,Breadboards,LCD's and Keypads laying around on my desk so I Figured why not have a look for a Printable model to tidy it up. Although there are some excellent…

Downloads
99
Likes
19
Rating
0
P
PrintablesSteve DeGroof

Parametric Keyboard / Keypad Generator

NOTE : This is a work in progress. The code's pretty stable but I may update it occasionally as needed. The OpenSCAD code included here (genKeyboard.scad) can be used to create custom keyboards and keypads with arbitrary layouts. By…

Downloads
96
Likes
18
Rating
0
P
PrintablesMark B

Home Assistant, ESPHome, ESP32 Keypad touchscreen

A ESP32 keypad touchscreen wall mount enclosure. Intended for home alarm but displays weather solar and whatever. yaml provided for ESPHome (will need modification for your setup). Repository - this will have the latest YAML and Kicad…

Downloads
94
Likes
52
Rating
0
P
PrintablesAxel

Raspberry pi Pico keypad 20 switches (Top plate)

The switch plate to a small Raspberry Pi Pico powered keypad. Switch holes are sized for Kailh switches, similar sized ones should fit. This keypad is designed to fit four M3x10mm socket head bolts and four M3 nuts. The bottom case…

Downloads
89
Likes
13
Rating
0
P
Printablesebarnes

4x4 Membrane Keypad

This is a keypad case I used to hold my 4x4 Membrane Keypad. It snaps together requiring no glue and you can insert a stencil over the switch to change the key allocations. I built it for DIY and prototyping projects. It also supports…

Downloads
88
Likes
6
Rating
5
P
Printablesteknomar7

Uplift Desk Keypad Headphone Hook (flush keypad)

This remix of the original design changes the screw holes to slots. This allows it to work with the flush keypad ( https://www.upliftdesk.com/advanced-comfort-flush-keypad-by-uplift-desk/ ), where the original was designed to work only…

Downloads
88
Likes
17
Rating
5
P
PrintablesJoachim

3x4 Matrix Keypad Enclosure

Small enclosure for the 3x4 Phone-style Matrix Keypad. This is made for the model they sell at ThePiHut ( 3x4 Phone-style Matrix Keypad | The Pi Hut ). I had to change the distance of the pins on the short side down to 45 mm even though…

Downloads
88
Likes
6
Rating
0
P
PrintablesAxel

Raspberry pi Pico keypad 20 switches (Bottom case)

The case to a small Raspberry Pi Pico powered keypad. The case has a mounting point for a Raspberry Pi Pico where two pegs can be squished with a hot metal object securing the Pi Pico. This keypad is designed to fit four M3x10mm socket…

Downloads
87
Likes
13
Rating
0
P
Printableselfrinjo

Keypad with Display Case (ESP32 S2-Mini)

A handheld case for an ESP32 S2 Mini with 1602A LC display and a 4x4 matrix keypad. There is a lot of space if you'd like to add a battery. Display, S2 Mini and the case should be screwed together with melt-in M3/4mm threaded inserts. The…

Downloads
84
Likes
23
Rating
0
P
Printablesscaccoman

Nuki Keypad 2.0 Cover with Pin and Fingerprint Access

This is a remix of Wowe’s Nuki Keypad 2.0 Cover , modified to remove the button covers while retaining the rest of the design. I made this version because I still wanted to see the numbers on the buttons and be able to insert a pin…

Downloads
84
Likes
8
Rating
0
P
PrintablesBert Muslu

Ring alarm Keypad - GE Simon STi

Remixed this to cover up the old holes from my GE Interlogix Simon XTi. I was to lazy to fill the holes and paint.

Downloads
84
Likes
7
Rating
0
P
PrintablesMajorOCD

Logitech G13 Gaming Keypad Lap Holder

This is a holder for the Logitech G13 Gaming Keypad to set it on your lap (your leg, specifically). I was having problems with my elbow and this alleviates a lot of the pain. It was either this or stop gaming. I made the lip separate and…

Downloads
82
Likes
12
Rating
5
P
PrintablesMatt Braddock

Micro Macro Keypad

A simple macro keypad that uses the Arduino Pro Micro and 5 keyboard switches. Case is held together with 6mm diameter magnets. In order to wire the switches, connect one pin to a pin on the Arduino and the other pin to ground. Sample…

Downloads
77
Likes
19
Rating
0
P
Printabless6monts

Arduino Uno Keypad

This keypad uses : Arduino Uno 3 rotary encoders, with a rectangular base 16mm wide (I repurposed mine from a broken amplifier) 3 buttons 9mm wide square base (the ones that usually come in Arduino kits) a 5mm LED Optionally a slide…

Downloads
76
Likes
21
Rating
0
P
PrintablesRevolta

Switchbot Keypad Touch mount plate

I've made custom mounting plate for Switchbot Keypad Touch You can mount it to wall with tape or with screws. Locking mechanism work, you have to put sim card removal on bottom of keypad to remove it from the mount, but you have to remove…

Downloads
75
Likes
4
Rating
0
P
Printablesarty27

Rasberry Pico Osu Keypad

I couldn't find an Osu keypad using the Rasberry Pi Pico so I designed my own using mechanical switches To build this you will need 2x Cherry Mx or equivalent switches, 2x 1N4007 diodes, 4x M3x12 screws, a Rasberry Pi Pico and some thin…

Downloads
75
Likes
9
Rating
0
P
PrintablesJesseW3D

Razer Orbweaver Gaming Keypad 20 Degree Ergonomic Tenting Wedge

I printed this in PETG on my Prusa Mini+ with 0.25mm layer height and 4 perimeters. The wedge is a bit shorter than the keypad so it would fit on my small print bed. You could easily extend it but it works well as it is.

Downloads
74
Likes
15
Rating
5
P
Printablespmolke

code lock keypad

simple code lock with 4x4 button matrix Parts: D1 mini ESP8266 (1x) 4x4 keypad (1x) M3 melt threads (4x) M3 screws (4x)

Downloads
73
Likes
16
Rating
0
P
PrintablesSnortimer

Overhead Door Company (Genie) Keypad Cover

This is a replacement cover for an Overhead Door Company (or Genie) garage door opener remote keypad. There appear to be a few different designs of such keypad covers, but the ones I found on Thingiverse didn't match my old covers. Print…

Downloads
70
Likes
0
Rating
0
P
PrintablesProjectsByBrian

CNC Keypad

I built a keypad for my MPCNC that runs Octoprint. This connects to my tablet via an OTG cable. I have a pro micro inside the enclosure and am using mechanical keyboard switches to program each input as a keyboard command (Printoid…

Downloads
68
Likes
21
Rating
0
P
PrintablesTom

Arduino UNO + screwshield + LCD keypad shield case

This case snaps together and fits Arduino UNO with the common D1 ROBOT 6 key keypad shield (no button holes, sorry but my project didn't require buttons, which you can drill for) and a screwshield in between. The base can be mounted…

Downloads
67
Likes
2
Rating
0
P
Printableszillions

Wyze Lock Keypad Privacy Shroud

Can be printed without support, with the back side down. Includes a 1mm deep lip around the back of the cover to keep it in place on the keypad. This should not be deeper than the existing “feet” that offset the keypad from the mounting…

Downloads
66
Likes
9
Rating
5
P
PrintablesJayFiDev

Custom Mechanical Keypad with Display

Keypad using mechanical keys, Arduino Pro Micro &ILI9340 SPI Display Input device to improve workflow and user input without having to remember a lot of different key combinations. Hardware Mechanical Keys: Ebay Microcontroller: Arduino…

Downloads
66
Likes
28
Rating
0
P
Printablesroeidalm

reolink doorbell nuki keypad v2 case

printed in PETG (not required) use: 4 screws of m5 and nuts onshape: https://cad.onshape.com/documents/5442eb843877b0e972606f13/w/3ad5bb959bb9e2532f018e74/e/0af4c64a48135b00ac0a3592?renderMode=0&uiState=65699be9b645062b129bc287

Downloads
65
Likes
8
Rating
5
P
PrintablesStout

Ring 2nd Gen Keypad Mount

This is a remix of @thesmart's ring keypad wall mount. I've updated the original to work with the 2nd gen keypad. The included stl is sized to fit a 1-gang electrical box, but feel free to use the included fusion 360 file to resize as…

Downloads
64
Likes
3
Rating
0
P
PrintablesRob65

Numeric Keypad (USB or Bluetooth)

This is a numeric keypad I made to be used with something like a Waveshare RP2040 Zero (USB only) or a Seeed Studio XIAO ESP32-S3 (BlueTooth). This is still a work in progress. The keycaps are “stolen” from an old keyboard but I do plan…

Downloads
64
Likes
27
Rating
0
P
PrintablesPfeifferCh

Nuki Keypad 2.0

Remix von Wowes Button ( https://www.thingiverse.com/thing:6411125 ) Dieser Remix enthält eine Bohrung für den Schließen-Knopf sowie Knöpfe in 4 verschiedenen Durchmessern in jeweils zwei verschiedenen Stärken, diese können zB mit…

Downloads
63
Likes
5
Rating
0
P
PrintablesStephen Imeson

Keypad cover

This keypad cover works with 3" X 4.5" keypad. It is designed to slide behind the keypad. Simply loosen existing mounting screws until there is enough space to slide the cover in. Then retighten mounting screws.

Downloads
62
Likes
2
Rating
0
P
PrintablesMorris Lazootin

DITEC Entrematic Keypad Cover / Shroud

Edit 2026 - added a new model which doubles the thickness of the walls to 2mm (four walls) - should hopefully add a bit of resilience! As the guy stuck with maintaining our communal driveway's gate (how? why?) I was getting tired of…

Downloads
62
Likes
0
Rating
0
P
PrintablesSteve DeGroof

Another Parametric Matrix Keypad

Update : I've done a minor redesign to make the keys a bit more responsive and to make assembly easier. The original file have been moved to a folder for reference purposes. This is the latest version of my matrix keypad design. It can be…

Downloads
62
Likes
9
Rating
0
P
PrintablesFwlogue

Apple Magic Keyboard with Numeric Keypad Stand

A stand for the Apple Magic Keyboard with a numeric Keypad stand. I created this stand with a 12 degree incline.

Downloads
61
Likes
5
Rating
0

LCD1602 Keypad Arduino Bedienpanel – Zahlenschloss

Dieses 3D-druckbare Kombigehäuse macht aus einem 16x2 I2C LCD Display / LCD1602 und einem 3x4 Matrix-Keypad ein kompaktes Bedienpanel für Mikrocontroller-Projekte. Ideal für: Zahlenschlösser, Zugangskontrollen, Passwortabfragen,…

Downloads
60
Likes
13
Rating
0
P
PrintablesSteve DeGroof

Membrane Keypad

Update 7/12/24: Minor changes to the SCAD source. Added a 60-key model with a 12×12mm grid. Update 7/4/24: Updated SCAD source to make customizing easier. Added a ridiculous credit card sized keypad with 60 buttons (requires 1/8" wide…

Downloads
58
Likes
24
Rating
0
P
Printables20kev01

Gehäuse SparkFun Qwiic Keypad

Gehäuse für SparkFun Qwiic Keypad

Downloads
57
Likes
3
Rating
0
P
Printablessquid.jpg

WiFi Keypad Matrix Remote

A simple remote featuring a 3x4 numeric matrix keypad. The remote uses a QT Py ESP32-S2 for WiFi connectivity, and uses a tilt-ball switch and the deep sleep feature of the QT Py ESP-32 to automatically wake the remote when picked up. A…

Downloads
57
Likes
13
Rating
0
P
PrintablesWerner W.

Nuki Keypad 2 Wand-Montagehalter

Halter und Gehäuse zum Nuki Keypad 2 Verhindert die Werkzeuglose Demontage des Keypad. Geeignet für Aussenmontage, wenn der Montageort vom Wetter geschützt ist. Es wird die Original Basisplatte verwendet um das Keypad auf den Halter zu…

Downloads
56
Likes
5
Rating
0
P
Printablesbockensm

Ring 2nd Gen Keypad Single Gang Mount

This is a remix of @stout's keypad wall mount. It is intended to fit over a single gang US electrical box opening. The only difference in this remix is that the center opening that you could pass a cord through has been closed off. The…

Downloads
55
Likes
3
Rating
0
P
PrintablesCarlos Peña

Base para botón estándar ON OFF / Keypad for standard switch on off

Base para botón plástico ON OFF de dimesiones 12mm X 19mm

Downloads
54
Likes
5
Rating
0
P
Printablesjason

Xfinity XHK1-UE Keypad Cover

Nice little cover to keep a Xfinity XHK1-UE Keypad protected from the elements. This zigbee keypad can typically be found online for about $20. The case was designed to keep it safe from elements but be warned that the keypad IS NOT…

Downloads
54
Likes
6
Rating
5
P
Printablesila

Yale keypad cover

Basic cover to keep your Yale keypad safer. I used black PETG, enough perimeters to make it 100% Oh btw I used strong double sided tape to put it on the wall after the keypad. Make sure there's little room for you to remove the keypad to…

Downloads
53
Likes
3
Rating
0
P
PrintablesThump2010

Rigexpert AA-30 zero case with keypad and display

This is a case for the Rig Expert AA-30 Zero hat that goes on top of an Ardiuno Uno, it has a keypad and display. Here is the link to the keypad and display…

Downloads
52
Likes
10
Rating
0
P
PrintablesDolmaster

Support for Robodyn keypad 4x4 + NodeMcu v3

Box for Robodyn Keypad 4x4 module + NodeMcu v3 lolin Extra parts: M3 20mm x4 (close the box) M3 10mm x2 (mcu) M3 nut x6 Code here for MQTT here: https://github.com/luismiparra/PUBnodemcuKeypad4x4MQTT/tree/master/PUBnodemcu_4x4panel_mqtt…

Downloads
52
Likes
1
Rating
0
P
PrintablesLonglife2012

NUKI - Case with rain and insert Thread protector for Keypad 2.0

My design takes into account the attachment with insert threads. I have adapted and extended the models.

Downloads
51
Likes
3
Rating
0
P
PrintablesAdafruit

Kitty Paw Keypad with Color TFT

Kitty Pad on YouTube https://youtu.be/elHJDXq4Yb0 Build the cutest four-button mechanical keypad with the Adafruit QT Py RP2040 and a 1.54in TFT display. Using CircuitPython, you can turn this into a USB macro pad or a MIDI controller.…

Downloads
50
Likes
40
Rating
0
P
Printablesedgar

Macro keypad

Arduino pro micro based custom keyboard for standard switches. I am using it for Catia keyboard shortcuts.

Downloads
47
Likes
14
Rating
0
P
PrintablesWHowe China

AIC Pico and AIC Key (AIME and Amusement IC Reader and Emulator with Keypad)

AIC Pico and AIC Key Amusement IC Card Reader, AIME & Cardio Emulator It's small, smallest as far as I know. Many variants AIC Pico AIC Key PN532 AIC Key PN5180 (see notes 1 below) AIC Pico Lib (see notes 2 below) Easy to make. Sega AIME…

Downloads
47
Likes
5
Rating
0
P
Printablesthesmart

Ring Alarm Keypad Wall Mount

I had an electrical box from an old alarm system, but my Ring Alarm didn't come with a plate that fits US electrical boxes. So, I made this adapter that fits with the electrical box and mates w/ the keypad's wall plate that is included…

Downloads
46
Likes
6
Rating
5
P
PrintablesSpicyLimes

Keypad (Numpad) Low Profile Keycaps

A simple Low Profile Keycap designed to fit the cheap, generic number pads (numpad) that you can find on Amazon. They don't use any fittings that I could find a model for, but I did find a model that came close, so I remixed it to fit! I…

Downloads
46
Likes
4
Rating
0
P
PrintablesSteve DeGroof

6-key USB Keypad

I've been developing OpenSCAD code to generate functional parametric keyboards and keypads. This is the first practical application to come out of that. Here's what it looks like in action. It's attached to a Lenovo laptop and I'm typing…

Downloads
45
Likes
11
Rating
0
P
PrintablesGareth79

Matrix keypad surface mount enclosure

This is a remix of a model by TzOk, I have made it slightly deeper and added screw holes side mounting tabs for ease of use. M2.5 machine screws self-tap into the matrix keypad's frame quite nicely. The tab holes are M2.5 but M3 is…

Downloads
44
Likes
6
Rating
0
P
Printablesonurozen

Aqara U200 Keypad Cover

After mounting the keypad on the wall, you should attach it to it. After it is attached with 2 screws, 2 screw covers that cover the holes are given in the attachment. For those who do not use it with batteries but want to use it with an…

Downloads
43
Likes
2
Rating
0
P
PrintablesStephan Gerlach

RFID / Keypad rain cover

Rain cover to allow outside installation of RFID / Keypad

Downloads
43
Likes
0
Rating
0
P
PrintablesChangerang

Genie Garage Keypad Retrofit

If you have this Genie Keypad to open your garage from outside, you know that the prongs break off. This insert, which can be glued in, will give your keypad hinge new life and allow you to put the cover back on. I typically print with…

Downloads
43
Likes
1
Rating
0
P
PrintablesMaciek W

Cover for Aqara U200 Keypad Anti-Theft Cover

Cover for https://www.printables.com/model/1016350-aqara-u200-keypad-anti-theft-security-cover to hide the screws and make it less obvious to steal. And also to look a bit better. You should print both models. Originally I have printed…

Downloads
42
Likes
5
Rating
0