ASSASSINS KNIVES
Armas personalizadas con el rostro de personajes de películas de terror Category: People
- Downloads
- 1,216
- Likes
- 494
- Rating
- 5
151 models
Armas personalizadas con el rostro de personajes de películas de terror Category: People
New version of the model 1.1, optimized for easier printing. Game from first episode: keys and knives Support is needed. You can print individual parts and then glue the entire model. I will add photos of the finished product as soon as…
New model of stand are ready! Check it out: https://www.printables.com/model/1810340-single-edc-knife-stand-12-different-models Hello everyone! This time, I am presenting a knife stand that you can show off. If you have knives in your…
Little update : new version of spacers with proper dimensions - previous version was too long, my bad. Has your EDC knife collection grown? Are you running out of space on your shelf? That's why I've designed a simple tower-style stand…
A set of knives inspired by Metro 2033 series suitable for LARP games. Print instructions Print all knives with black flexible filament, Flexfill 98a is a good choice. However, if you have softer filament, try to use it instead. You need…
a JIG inspired from the already not available JIG SV 45 from Tormek, as they replaced it by the new KJ-45 JIG, proposing a better centering of the knife and as a consequence a symetric angle of sharpening for both sides. However, offering…
This was inspired by the Ranger's Apprentice stories by John Flanagan and the fan discussion here (https://flanagan.fandom.com/wiki/Flanagan_Wiki). I wanted to keep it simple and safe for those younger apprentices. The throwing knife has…
This is a work in progress for sure (meaning it should be updated multiple times over the week of 10-03-24), and the blend files are going to be included in case anyone wants the original files to modify. They were brought into…
The Holder for kitchen utensils and knives consist of two parts. They must not be glued together, as this will make cleaning difficult. It was designed for a Bürster Premio Life caravan, but has been redesigned for more general use.
Dummy 13 Knives extended blade and resized to 250%
Dummy 13 Weapon Pack This weapon pack was designed for Dummy 13 and includes a variety of accessories for different character builds and display poses. Included: • Trident • Longsword • Large Knife (need supports) • Small Knife (need…
Don't forget to like, and to donate if you really enjoy the file. :) Plastic toy knives for food practice or clay/Playdoh. Pictured knives are printed at 75% scale. For play or training with soft foods or clays like Playdoh. Use under…
3D MODEL DESCRIPTION Easy to print and add Halloween decor to your house scale up or down (no less then 50%) for multiple uses and ensure you keep a minimum of 3mm in thickness -Use the .3mf file to customize the colors (Sorry only…
it will fit right inside the top of that clear bin im planning on filling up with other knives.(see picture) thats why i made it this particular size. let cool before debedding to keep flat Super glue the joints. tape in place to dry. bin…
Good quality throwing knives mainly for adults. Please leave reports and problem so we can all help each other out, Than
Simple organizer for storing pocket knives and other EDC items. STLs provided for versions with 3, 5, or 7 slots, or a 7-slot STEP available for remixing. Note that this is for small to medium sized knives, you may need to scale this up…
Kitchen Knives Holder 3 part design Total dimensions 480x165x70mm Holds 9 knives
Dummy 13 Knives extended blade and resized to 200%
I designed this model for myself to keep some EDC items organized and I figured I would share. This is the maximum size my Mini+ could print. It's 180x180mm. Wallet is a Herschel Charlie. Raycon E85, Leatherman Skeletool, Milwaukee 6-in-1…
I made these Wedding cake knive drawings last year and made them on my wood router. I did print one scaled down a little in abs and it looked so I nice I've kept in the office to admire. Hope someone else might find them useful. They need…
Small knives might slide over the magnetic holder of the Horl 2 Knive Sharpener. This adapter allows to sharpen smaller knives with a flat or curved back. Printed in PLA, 0.15 mm layer height, no supports. There are 4 holes for 12mm…
Hi this is a stencil for be easier to sarpen the lathe knives to a specific angle.
Why Use This Model? This modular wall-mounted display allows you to show off your folding knife collection in a safe and aesthetically-pleasing fashion. Background I have a collection of folding knives, and I wanted a better option for…
The dual wielded knives of Soshiro Hoshina. These were commissioned by a friend, who then gave me free reign to do whatever I wanted with the files, so I'm posting them online for every cosplayer to use. The blade and hilt pieces slot…
I made this model using blurry reference photos, so it's probably not completely accurate. The finger notches have a diameter of 0.75 inches, so you might have to resize it to fit your hand. Print Settings Printer Brand: Phrozen Printer:…
Here are a set of blade guards for your kitchen knives, designed to be printed in vase mode to save material and provide durability. Blade guards are great for protecting edges from dulling when placed in a cutlery drawer, protect hands…
A disassembly jig to easily drill out the rivets on a flat surface. The cutout is for the corkscrew/phillips-screwdriver. Can be used on both sides, but depending on your nozzle and settings you might have to change the diameters on the…
Design with Thinkercad. Holds 6 kitchen knives. Printed in sparky gray Eryone. Layer thickness: 0.2 mm.
Two tones because I ran out of filament mid print… tired of using cups that would get knocked over / tip over. should fit on most regular sized printers, might need to print at an angle to fit.
⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…
Can probably make some changes to make the text print better, I just called it good for what it made. Feel free to edit the original document here:…
Heyho, this is the template/jig I created after quite a few moments, taking measurements, printing prototypes and creating waste :D To make your own custom scale you need: 1 x This Jig Set 1 x Drilling machine (best with a stand) with a 5…
The knives are shorter or longer and they are also rounded or pointed.Three knives should be printed per hand.The strap should be shortened with scissors after putting it on the hand.The knives should be pressed into the clutch, if they…
These are the flying dragon throwing knives that i used in my recent video about 3D Printed Throwing Weapons, these are functional so be careful!! You can glue them together to make one BIG knife or have 2 knives, they are heavy and big…
Contenitore impilabile per coltellini svizzeri. I tre inserti sono disegnati per accogliere i vari formati Victorinox e Wenger. Dal piccolo 58mm, fino ai 130mm. All'interno, potete inserire un foglio di feltro per non graffiare i…
I have a small thicknessplaner and had the great idea to plane oak endgrain. It worked, but now the knifes a dull. New knives are 25€, sharpening almost free. I looked on the Internet how to sharpen theses blades and i found a cool…
I created a replacement part for my Olfa utility knife's stripped screw holes on the slider. According to Olfa's website , this part is called Slider Parts C. Print settings: Filament: PETG Layer height: 0.15mm Supports: No Perimeters: 3…
I thought the Assassins Knives on Thingiverse were so cool, and I saw some people doing frames, but no one had the stl for them, so I made one myself. This is designed to be a simple manual color swap using layer pause, and can be thrown…
A modular knives holder, can hold knives: vertically (0 degrees) 30 and 45 degrees, with gaps to hold blades with thickness of: 1.5mm 2.5mm 3.5mm 4.5mm (only Vertical) Also comes with a 10mm spacer, and caps for both ends.
This is a replaceable slider part for Olfa 18mm blade knives when the screw hole on the slider becomes damaged and cannot be tightened. I previously released a replacement part for slider part C here…
These are throwing knives so you can go stealth in airsoft. I printed them with high strength resin. I used black and clear. When I took them off the printer they were kinda sharp so I sanded them down a bit.
A simple paracord lanyard bead for Gerber knives. Print with 100% infill, no supports. Each hole diameter is 4mm, and should just fit softer 550 paracord. Scale as necessary. Category: 3D Printing
Hi! I used this model since a year in my kitchen :) Everything is still strong as new and perfectly integrated in my drawer. I needed a knives organizer as some of the blades are pretty sharp. My drawer had few compartments to store our…
Bigger Knives Remix of Knives Tray for Minimalist Knife Block.
This is a model of the Throwing Knives from The Finals. More info, documentation, and source files can be found on Gitlab .
Kitchen basket for spoons, forks and knives. Basket size: 130x130x130mm. Print in place no support needed.
3D Printed Utility Knives (9mm & #11 Scalpel) These are practical, fully 3D-printable utility knife handles designed for standard 9mm segmented blades and #11 scalpel blades. They are lightweight, quick to print, and feature a secure…
Knife organizer - 9 knives Knives of different length. Approximate blade max length 260mm (lower level) / 135mm (upper level) Longer blades may cause the tip of the blades to protrude the knife block. Two versions Tapered end (for tighter…
I wanted a tighter packing of knives in my drawer, so I remodeled the blocks to allow 4 knives in two Gridfinity Columns, and then I also created a steak knife holder to hold 6 knives in 3 columns. I like the layout better as they work…
(English see below) Français: La base peut être imprimée à l'endroit. Le bloc qui viendra au-dessus doit être imprimé à l'envers. Pour une meilleure stabilité, la base est prévue pour être remplie avec ~500-600g de mortier-ciment (bien…
Collection of plastic blades I modelled after their real-steel counterparts. Could be used for training g, BUT SOME OF THEM HAVE SHARP POINTS, so use your common sense! I did those mainly for ttrying them out before buying and I saved a…
I love my knives being sharp and organized. But we all have different amount and sizes in our drawers, so I made a spreadsheet to help! You need to use Freecad, it's free and easy to setup :) When in it, you will find a spreadsheet called…
This is a vertical organizer for forks, knives and spoons, so you can store the cutlery on the cabinet door and free up, use it and abuse, just keep your kitchen clean a a safe space, your wife will apreciate it!!!! There are two…
Organize your kitchen with gridfinity. I provided a 2 ways to print this as: 2 pieces - gridfinity_knives_rack_bottom.stl and gridfinity_knives_rack_bottom.stl - it has integrated holes to use with gridfinity_knives_rack_plug.stl one…
Lathe knives models for education purpose
I have designed a new knife disc for Alfred. I have been using it for 30 days now. In my tests, the cutting quality appears to be better, and the operational noise seems lower/more consistent. The knife disc features openings for M4 nuts.…
Gold Divot Repair Tool, 118mm Size, Flip Open, Inner Baller Bearing. “LMS-Knives” design & maker. it comes with a middle button to release the fork. if you like this model, Please Click “Like”, I will happy for a whole day long!
Print at 0.2mm layers. Angle is for one bevel, total angle is reading*2.
Holder for OLFA Utility knives and room for spare blades. Hang or stand. Print with minimum 5 line wall thickness. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 20 Filament: ANY PETG…
Moderní design držáku čtyř kuchyňských nožů/ Modern design of the holder of four kitchen knives Kuchyňský držák nožů s lehkou údržbou. Kitchen knife holder with easy maintenance. Stojan/ Stand Tento držák kuchyňských nožů je velmi…
Passend für 60x120er Schleifsteine. Einfacher zu verwenden, einfach nur waagerecht halten das Messer. Verschiedene Winkel als Vorlage. Unter dem Schleifsteinhalter kann eine Antirutschmatte eingeklebt werden. Ich verwende hier PETG, ist…
This is my Female Rogue With Knives . This model was made for a fellow Patron of MZ4250 ( Thingiverse , Printables ) who requested it on the discord server that is available for every Patreon tier. A remix of a model made by MZ4250 (…
Knife organizer - 9 knives - cut version Knives of different length. Approximate blade max length 260mm (lower level) / 135mm (upper level) Longer blades may cause the tip of the blades to protrude the knife block. Two versions (see…
Print two of each of these parts and fit them together to form a complete tray or knife block. They are symmetrical so you don't need to do anything to the models, just print 2 of them. You can glue the two halves together if you like,…
A simple paracord lanyard bead for Spyderco Byrd knives. Print with 100% infill, no supports. Each hole diameter is 4mm, and should just fit softer 550 paracord. Scale as necessary. Category: 3D Printing
Knife organizer - 2 knives Two knives of different length. Approximate blade max length 235mm A longer blade may cause the tip of the blade to protrude the knife block. Printing Check infill and top layer slicer settings to have…
Don't bother with glue, this .3mf file provides easy printing of the Assassins Knives. Each knife is contained on its own build plate. All credit for the design and originals goes to Heavy Creators (…
Simple knife rack for holding straight utility knives. I made this for holding leatherworking trimming and skiving knives. Designed to hold knives with 2mm thick blades. Five slots are 30mm deep, and spaced 25mm apart. Attaches to…
Small 15° angle block for sharpening knives. Fits two 10*3mm magnets.
Mount for Gerber EAB (Exchange-a-Blade) folding utility knife. Fits both Original and Lite versions of the Gerber EAB knives. https://www.amazon.com/dp/B002RILCLY/ Includes slot for integrated 6x20x2mm magnet (optional) to retain the…
Cutco Knife Knife Block add on for Steak Knives 2159 Lets you use 3M Command Strips (Large Velcro kind) to place your knives onto the back of many standard knife blocks.
You will need a magnet with a maximum diameter of 10.9mm and a maximum height of 9mm... (I used three 10x1mm - and it works fine) You will also need a larger wooden spoon. There are two versions of the hands one with a hole (nail/pin…
stubby style, small pocket knife, 110mm size, comes with bottle opener, “LMS-Knives” design & maker
Small Pocket Knife, Comes with Belt Clip, Belt Cutter. Glass Breaker. if you like this model, Please Click “Like”, I will happy for a whole day long!
Simple holder for two SAKs for honeycomb storage wall. See files for version for single SAK.
I really liked the original design but it was to big for my needs so I remixed to only occupy two blocks, I also added another options: 1x6 grid and 1 hole for knives 1x6 grid and 2 holes for knives 2x6 grid and 4 holes for knives 2x6…
Детали напечатаны без поддержек. НО ЛЕЗВИЕ НАПЕЧАТАНО С ДРЕОДЕВИДНЫМИ ПОДДЕРЖКАМИ, СТИЛЬ АККУРАТНЫЙ! Спасибо!
Knife block for 8 steak knives. We needed a safe way to store our cheap steak knives in our camper. I intended to make a snap on lid for this, but that will have to be a REV2 change. The knives stick over too far on one side, so I'll need…
This jig is helping hold a correct angle during branch shreder knives sharpening.
Cutco Knife Co. Plastic Organizer for Steak Knives 2159 Tray to hold 4 (#2159) Steak Knives Protect your Cutco from dulling and damage that can occur when stored loose in drawers.
STL model is only half, print 2 and adhere together Grab some red ribbon to add on to the look!
Compact and efficient, this kitchen drawer knife holder keeps your knives organized and easily accessible alongside your cutlery. Its sleek design fits seamlessly into any standard kitchen drawer, offering a safe and convenient storage…
A simple throwing knife and sheath design, originally designed for cosplayers and Ren Faires. Can be used to chunk at people you don't like. Incudes several variations of the knife and sheath. Didn't like any of the other ones out there…
Butterfly golf divot repaire tool, 116mm size, comes with bottle opener, “LMS-Knives” design & maker. if you like this model, Please Click “Like”, I will happy for a whole day long!
Based on Zack Freedman's Gridfinity model. A Gridfinity 1x3 organizer designed to hold two 111 mm knives. Good for storing and protecting knives like the Victorinox Swiss Cheese Master and JJ Barretos in a modular system.
Designed some simple knife scabbards for a Juvale Cleaver, and for a Dexter 8 inch Chinese style Chef knife. OpenSCAD source code is included. I printed mine out of PLA+, but I would probably recommend using PETG
Unfortunately, the set does not include a blade protector. Therefore I have designed the covers myself. The models shown are printed with Extrudr Durapro ASA neon orange. I recommend in any case to use a technical filament like ABS or…
Skadis Carving knives and blades holder
Bring style and organization to your table with the Bon Appétit cutlery holder! This refined and functional design is crafted to hold forks, knives, and spoons, keeping them tidy and ready for use. Perfect for restaurants, formal dinners,…
printed with 2 layers inner/outer walls, 10% infill - seems to be enough
Basic logo for Hawk Knife Designs. G&G Hawk (Grant and Gavin) make, arguably, some of the best knives in the world.
Helo, when you buy your knives set you are limited to 5 pieces. Like in my case i bought more knives separately, but had no place to put them. Block is printed 0,15mm in Antracite PLA from Fiberology, I am begginer so did not wanted to…
the print will give you the perfect sharpening jig in order to cut things right. here the video how I makes it : https://www.youtube.com/watch?v=6mM7BnwuB_s
This is an organizer/holder for six Zwilling J.A. Henckels steak knives to keep them organized and safely stored.
Stand for Opinel steak knives
All parts stick together with 8x2mm magnets (no need for glue). For carrying the blade's weight I used a 10x2mm magnet on top of the blade pillar. I printed the base with a 10% triangle infill. I added a break in Prusa Slicer directly…
I saw that the original needed screws and so, I decided to make it 100% 3D printed using a snap fit design! I also made magnet holes for smaller magnets but you dont need to use magnets at all.
I created this for use at work to provide a safer way to snap off Olfa blades and collect the sharps for disposal at the same time. There are two for the most common blade sizes: 18mm 25mm
I have a messy knife drawer, so I made an organizer for it. It can hold: 2 really big knives, up to 360mm 2 kinda big knives, up to 324mm 12 steak knives and similar, up to 242mm 2 paring knives, up to 185mm This is printable on a…
I printed a longer version as well that technically fits the knives more appropriately, but I like this accidental slightly shorter version as it pushes the knife handles up and makes them much easier to remove. You can tell it's far from…