Search results: ktm

Sort order

385 models

P
Printablestsukworks

Late Model KTM/HQV/GG Chain Tension tool

This tool is handy for quickly setting the tension on late model KTM/Husqvarna/Gas Gas 125-501 dirt bikes that has a specified slack of 55-58mm, measured between the top of the swing arm and the bottom of the chain. Note: this has only…

Downloads
1,108
Likes
117
Rating
5
P
PrintablesOld Machinist

KTM Husqvarna Gas Gas Motorcycle TPI 2-Stroke Oil Fill Cap Sleeve

Sleeve that slips over the 2-stroke oil fill cap that reduces the build up of dirt to the underside of the cap lessening the chance of dirt being introduced into the oil tank during oil fills. Print simply slides over the top of the cap…

Downloads
910
Likes
44
Rating
5
P
Printablesredvsgreen

KTM EXC/EXC-F Rear Shock Protector

Protect you KTM rear shock from being worn out by the rear wheel mudguard. I printed it in PETG with 90% and 100% infill. Fit is not 100%, but you should hear it snap when it fits correctly. Lasts probably 10-20h. Maybe more, but I…

Downloads
765
Likes
66
Rating
5
P
PrintablesLegufix

KTM coaster

A friend of mine is a big KTM fan. For this reason I have designed him for Christmas KTM coasters. Because I wanted to have a flat resting surface for the drink, I have decided on a two-part solution without color change. The lower part I…

Downloads
305
Likes
56
Rating
4.25
P
PrintablesOld Machinist

Alta Redshift Motorcycle KTM Headlight Conversion Parts Kit

These pieces will allow you to run the KTM headlight (I believe the year range is 2017-2022 on this style KTM mask) on Alta motorcycles already using the KTM front fender fitted to the stock Alta triple clamps. Also allows MX and MXR's to…

Downloads
103
Likes
20
Rating
0
P
PrintablesJorreto

Pie pata de cabra para KTM 390 Adventure

Esta es una ampliación de la base de la pata de cabra de la moto KTM 390 Adventure. Sirve igualmente para la DUKE 390, no se si para otros modelos. He comprobado que las bases de la pata de cabra tienen ligeras diferencias aunque sea el…

Downloads
52
Likes
6
Rating
0
P
Printablesi5cemi

Austreiber Kurbelwellenlager KTM 690 - Crankshaft bearing extractor KTM 690

Falls euch wie mir der Lagerring zum austreiben des Kurbelwellenlagers bei der KTM 690 fehlt. Der Aufsatz verhindert das die Walzen beim ausschlagen aus dem Lager fallen. Mit einem entsprechenden großflächigem Aufsatz kann es nun aus dem…

Downloads
23
Likes
4
Rating
0
P

KTM Keychain

Any print settings will work, however to get the best details and print quality use a 0.25mm nozzle, but a 0.4mm nozzle would also work. Change the x and y axis percentage to adjust the size of the KTM keychain to your preference!

Downloads
2,958
Likes
313
Rating
4.91
P
Printablessometimes_erik

Fork Seal Driver Tool - KTM/Husky/GasGas (48mm)

--Updated V2 Available Now!-- Features 3mm alignment pins and better clearance! Use standard nails as alignment pins for more consistent driving. This is a fork seal driving tool for use with 48mm diameter dirt bike forks. This was…

Downloads
1,358
Likes
116
Rating
5
P
Printablesnbss

KTM 890 Adventure GPS Mount

Created GPS Mount after waiting for KTM Powerparts GPS mount (A61012992044) being on backorder. There are two file versions. One that fits the 890-R windscreen and the other for the S-model windscreen. The S-model version extends out…

Downloads
1,082
Likes
41
Rating
5
P
PrintablesMb3d_cz

ktm logo

ktm logo

Downloads
993
Likes
27
Rating
5
P
PrintablesGareth

KTM / Husky / GasGas Threaded Oil Funnel

Threaded oil funnel to fit most 250, 350 & 450 KTM / Husky / Gasgas motocross bikes. The funnel threads directly into your existing oil reservoir for easier oil refills. Air vent integrated into funnel to allow for fast pours with no…

Downloads
948
Likes
103
Rating
5
P
Printablesnitromodel

Sprocket wall Hangers Suzuki, Honda, Kawasaki, KTM, and Yamaha

I made these on my Mini Prusa +. They take about 7 hours to make each. They are about 7" in diameter and 0.300" thick. The Yamaha sprocket will need supports for the name. I will be working on others and will be doing a clock one as well.…

Downloads
731
Likes
106
Rating
5
P
PrintablesSren232

KTM 690 SMC R Achsschutz hinten / KTM 690 SMC R Axlesliders rear

Montagehinweis Gude, zur Monatge wird nur eine M10 Gewindestange und etwas Kleber benötigt. Zu erst die Gewindestange etwa auf Maß 315mm absägen, die Achsschraube mit einer 32er Nuss lösen und in die Mitte der Achsmutter eine Bohrung mit…

Downloads
677
Likes
48
Rating
0
P
Printablesbraga3dprint

KTM racing decoration

Introducing the "KTM Racing" Lettering Decoration – a versatile and stylish addition to your space. This 3D model features the iconic "KTM Racing" lettering, making it an ideal choice for KTM enthusiasts or anyone looking to add a sporty…

Downloads
652
Likes
98
Rating
5
P
PrintablesNMdesertracer

KTM 790/890 Adventure chain slack tool!

KTM 790/890 Adventure chain slack tool! Slide in from the back on the chain buffer till it reaches the front upper chain guard mounting point. It might fit the KTM duke. 38mm is how tall the actual printed part is off the chain guide. If…

Downloads
644
Likes
45
Rating
5
P
PrintablesJason H

Husqvarna / KTM throttle spacers

Small spacers, two different sizes. Printed mine in ABS and it's been hassle free for three years. Excellent throttle control. Undo your throttle and pop them in. It's that easy.

Downloads
616
Likes
19
Rating
5
P
Printablesredvsgreen

KTM EXC/EXC-F Front Headlight replacement

Save your original headlights from a crash by using this shield instead. Screws in with the regular screws. Fits EXC/EXC-F 2017 - Present and probably older versions as well. Print without support.

Downloads
604
Likes
46
Rating
5
P
Printablestsukworks

'17-'23 KTM Headlight Frame for Diode Dynamics LED SSC2

Change Log V3 Lower light bolt hole moved forward to allow for greater range of motion for lower light Reinforced the slot in the frame that interfaces with the lower headlight mount of the headlight mask. V2 Overhangs improved for more…

Downloads
590
Likes
84
Rating
5
P
Printablesflbdesign

RADIATOR CAP TOOL 23+ KTM/GASGAS/HUSQVARNA

If you have a 23+ KTM, Gas Gas or Husqvarna you know removing the new radiator cap is nearly impossible! Works on all 23+ KTM/GasGas/Husqvarna Austrian bikes. Print in PETG, TPU, ASA 100% infill with backing

Downloads
547
Likes
39
Rating
5
P
PrintablesJason H

Husqvarna 701 / KTM 690 fork guide

New and improved! Some have asked for one that is chamfered and stronger. So here it is. I've also included the f3d file. -------------------------------------- My 701 had the fork cables banging off the forks. Plus I wanted them off the…

Downloads
480
Likes
37
Rating
5

High Fender for KTM 390 Adventure 2020-2024

A base and suspension protectors are included in the files, using good PETG would be sufficient, but it is not a bad idea to use more resistant materials, especially those that are water resistant. Apart from the printed parts, the…

Downloads
472
Likes
21
Rating
0
P
PrintablesQendrim Berisha

KTM Wheel Bearing Protection Cap

Protects rear wheel bearings and seal rings from mud. Also protects from pressure washers.

Downloads
464
Likes
33
Rating
5
P
PrintablesDevilscave

KTM Duke GoPro / Osmo Action Cam Mount

Habe hier eine GoPro bzw. DJI Osmo Action Cam Halterung für KTM Motorrädlenker mit 28mm erstellt die in der mitte aber eine 33mm Schale haben. Da speziell bei KTM die untere Lenkerbrücke einen Verbindung um das Lenkerrohr mit anderen…

Downloads
458
Likes
81
Rating
0
P
Printablesfran González

carpuride mount KTM 790/890 adventure

este es un soporte para w702 de carpuride para montar la pantalla

Downloads
455
Likes
11
Rating
5
P
PrintablesDarthHeino

Brake Line Guide KTM, Husqvarna, GasGas

I use the brake line guide on my 2018 KTM EXC F450 which is equipped with a navigation tower for rallye racing. It will fit on all bikes with a similar fork. The updated version is short and got an offset in order to get more clearance…

Downloads
450
Likes
43
Rating
0
P
PrintablesTim Klecka

KTM/Husqvarna Side Stand Base

This is a model to replace a broken or old KTM or Husqvarna side stand base used in enduros (like the EXC) and some motocross bikes. I have uploaded two models, one with a hole in the middle so you can add a standard M8x30 bolt for…

Downloads
450
Likes
43
Rating
0
P
Printablesnbss

KTM 790/890 Adventure Chain Gauge Tool

Tool to help check chain tension and wear as instructed in the KTM 790/890 Adventure owners manual. The extruded side is 3.5mm thick (middle of the acceptable range 2-5mm) and 25mm wide. The bottom is grooved to check chain wear and…

Downloads
444
Likes
42
Rating
5

KTM 390 / 790 Adventure Windshield Block

30-40% infill is recommended. Bump up to 4 perimeters as well to fill the walls. Organic supports does make it easier to remove, but regular grid works fine as well. A remix of a model uploaded by Pavel Mironov on Thingiverse. The…

Downloads
416
Likes
13
Rating
1
P
PrintablesSren232

KTM 690 SMC R Achsschutz vorne / KTM 690 SMC R Axlesliders front

Montagehinweis Gude, zur Monatge wird nur eine M10 Gewindestange und etwas Kleber benötigt. Zu erst die Gewindestange etwa auf Maß 290mm absägen, die Achsschraube mit einer 27er Nuss lösen und in die Mitte der Achsmutter eine Bohrung mit…

Downloads
406
Likes
32
Rating
0
P
Printablesflbdesign

KTM / Husky / GasGas Oil drain tube

Oil drain tube for KTM Husqvarna Gasgas The thread is M12 x 1.5. Compatibility: All KTM from 2009 All Husqvarna from 2014 All GasGas from 2021 Print in TPU or PETG Instructions: Lay the bike on its side with the drain bolt facing up, the…

Downloads
399
Likes
34
Rating
0
P
Printables4ndi323

BEST Helmet Holder Helmhalte KTM

Just added an KTM Logo to it ^^

Downloads
350
Likes
50
Rating
0
P
PrintablesTT_Engineering

KTM Motorrad Schlüsselanhänger

Ich habe hier einen Schlüsselanhänger für KTM Fans entworfen. Die Anhänger können in beliebiger Farbe gedruckt werden. Die Schlüsselahänger können schnell und einfach gedruckt werden. kein Support Layerhöhe 0,2mm verschiedene…

Downloads
339
Likes
33
Rating
5
P
Printablesmarcel293

Twotone hexagonal paper towel holder KTM

I remixed the hexagonal paper towel holder of Luke's 3D . I made twotone version with a KTM Logo an srew holes to mount it at a wall. @Luke: Thanks for sharing!! Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Rafts: No…

Downloads
335
Likes
63
Rating
0
P
PrintablesFSMaker

KTM Keychain portachiavi logo

KTM keychain logo with hand "OK" for the keyring Portachiavi logo KTM con mano a forma di "OK" per inserire l'anello del portachiavi

Downloads
334
Likes
19
Rating
0
P
PrintablesSammy

KTM ready to race

A simple model of ktm ready to race. Best for desks and shelves :D

Downloads
333
Likes
35
Rating
5
P
PrintablesMižufko

KTM Headlight Replacement

KTM Headlight Replacement I added one more bracket to this model for better stability…also the brackets are wider for better strength and the holes are wider for a better fit of the original screws no supports 80-100% infill

Downloads
333
Likes
27
Rating
0
P
Printablessometimes_erik

KTM Folding License Plate and Turn Signal Bracket - '11-'15

*Yamaha Version in Progress* Overview Do you enjoy the freedom and fury of having a street-legal dirt bike but fear ripping (or someone seeing) your license plate? Well fear no more because now it can be tucked away in the flick of a…

Downloads
329
Likes
50
Rating
5
P
PrintablesJanne

KTM Rear Compression Adjustment Knob

Fits ALL KTM, GASGAS, Husqvarna MX&ENDURO 2014-2022 models with 17mm high speed compression adjuster.

Downloads
327
Likes
47
Rating
5
P
PrintablesKSV25

KTM Duke 200/390 Power Plate

The Power Plate allows you to add a little horse power to your bike with a simple bolt on part. Allows your bike to breathe better giving it better throttle response and more horsepower overall. I've seen cheap CNC parts made for this but…

Downloads
327
Likes
20
Rating
0
P
Printablespauldaws

KTM Footpeg slider

Pair of sliders for KTM footpegs part number 78003041050 & 78003040050, these are the standard footpeg on most KTM Dirt bikes since 2000(?). Check your bike here - https://www.motosport.com/oem-parts/part-number/78003041050 Holes on base…

Downloads
308
Likes
58
Rating
5
P
PrintablesMrViddy

KTM Logo Keychain

keychain for your needs. Cut Down if need be. 4mm base and 0.8 color change (0.2 layers = 4 layers) 44mm x 33mm 6mm Keyring hole

Downloads
305
Likes
40
Rating
0
P
PrintablesMichal Bastl

KTM logo

KTM logo

Downloads
304
Likes
6
Rating
0
P
Printablesrtadlock

Clutch lever for KTM/Husqvarna/Gas Gas

I printed the lever and adjuster in both PLA and PETG using the built in profiles in PrusaSlicer but with 50% infill. Both levers have worked well for test rides. I plan to do some trail riding to see how the lever holds up, but so far…

Downloads
303
Likes
38
Rating
5
P
PrintablesHD_Creator

KTM keyring pendant

Printing and coloring This part is very easy to print. No supports or brim is needed. The material is not critical. I have printed mine from PETG orange (the KTM brand color) from DasFilament.de. Also the infill is not critical, I…

Downloads
294
Likes
37
Rating
5
P
PrintablesPhrilten

SP-Connect Mount for KTM Motorcycles

Please read this description carefully and understand it, before continuing. Disclaimer: You are responsible for the safety of your bike. If you don’t know what you are doing, stick to the original parts. Hi, this is a fusion of the…

Downloads
281
Likes
48
Rating
5
P
PrintablesDrewDeeDoo

KTM 990 950 adventure tank protector scan

A reference scan of the KTM 990 Adventure tank protector.

Downloads
280
Likes
15
Rating
0
P
PrintablesLegufix

Desk organizer with KTM Logo

I designed a desk organizer with a KTM logo as a present for a friend. The logo is printed separately and clued to the organizer. Print instructions The presliced KTM logo is for PETG (I only had PETG available when I printed this…

Downloads
277
Likes
55
Rating
5
P
PrintablesPechi

Klíčenka KTM

vícebarvný tisk

Downloads
275
Likes
32
Rating
5
P
Printablesblalor

2020 KTM 690 Enduro R throttle slop remover

The ride-by-wire throttle on the 2020 KTM 690 Enduro R has some play in it, a bit of slop when closed that I didn't like. This pair of spacers removes that. Note that there are two different spacers; you must print the pair. Print…

Downloads
259
Likes
19
Rating
5
P
PrintablesEcapox

KTM Duke 790 (2019-2022) Tidy Tail

License plate holder for the KTM Duke 790. This design uses the stock tail light and aftermarket 10mm turn signals. Most 3rd party tidy tails use a non standard tail light and many of them are bad. I decided to design my own tidy tail…

Downloads
250
Likes
17
Rating
0
P
PrintablesJaneo

KTM keychain

KTM brand keychain, with a simple and easy design for a quick impression and low material cost.

Downloads
248
Likes
24
Rating
5
P
Printables4sStylZ

ABS / Traction control delete spacer for 701 husqvarna or 690 KTM 2020+

Disclaimer : Use it at your own risk. Road regulation in your country probably forbid such a modification. It is designed for 2020+ bikes or higher (despite it can probably used on other bikes) By adding this spacer on the rear speed…

Downloads
238
Likes
12
Rating
0
P
PrintablesDavid Šilpoch

KTM keychain

KTM keychain

Downloads
235
Likes
14
Rating
5
P
Printablesjetse_3d

KTM inspired keychain

This keychain was a small and simple project to make, feel free to dowload or like this design.

Downloads
233
Likes
18
Rating
5
P
PrintablesVachy

Wings KTM SUPERDUKE 1290 R 2021

I designed GP wings for the KTM SuperDuke 1290R 2021. Very easy installation: I recommend printing from PA12 or PC Blend Carbon Fiber

Downloads
231
Likes
15
Rating
0
P
PrintablesMAKERTEAM®

KTM Pencil Box - Print in Place - no assembly

Little enhancement on the Pencil Box of YogiTech . If you like it please do not forget to give him a like too, thanks. Enjoy! Material: PLA Infill: 20% Layer height 0.2mm

Downloads
230
Likes
31
Rating
5
P
PrintablesFelix

WP Fork Protection Ring 62,1mm for KTM / Husqvarna 48600698

A redesign of the OEM Part 48600698 adapted for 3d printing. I split the original design to allow for installation and replacement without uninstalling the forks. A groove was also added to be able to add a piece of wire to increase…

Downloads
229
Likes
21
Rating
5

Adapter for mounting LED indicators to KTM motorcycles

Adapter required to install an aftermarket indicator to KTM motorbikes. Works with most 690, 790, 890, 950 and 990 models. 4 options - for M8 and M10 threaded indicators - both in low and standard versions.

Downloads
217
Likes
33
Rating
0
P
Printablessometimes_erik

Fork Seal Driver Tool - 43mm with Alignment Pins (KTM/Husky/GasGas)

This is a fork seal driving tool for use with 43mm diameter dirt bike forks. This was designed with WP dual chamber forks in mind, but will service numerous other fork types from KTM/Husky/GasGas. There are two lips designed into the seal…

Downloads
214
Likes
24
Rating
5
P
Printablesiqjocke

KTM side stand extension foot

Side stand extension foot for ktm super adventure 1290 i printed it in PLA but it is probably stronger in ABS Use at your own risk. I am not responsible for whether your bike falls Print Settings Printer Brand: Wanhao Printer: Wanhao…

Downloads
211
Likes
24
Rating
5
P
PrintablesMR White
Downloads
211
Likes
29
Rating
0
P
PrintablesDaniel

2022 KTM Duke 890 Poor Man's Power Plate

This is my design of a poor man's “power plate”… You can use whatever filter you want, drill or zip holes into it, and use it as you need. OR, you may purchase the Rottweiler Performance intake (red=race) filter, and the holes are already…

Downloads
199
Likes
13
Rating
0
P
PrintablesBasementLAB

KTM "Type SM" Keychain - Portachiavi - Porte Clès - 钥匙链 - Schlüsselanhänger

KTM Type SM - Keychain - Portachiavi - Porte Clès - 钥匙链 - Schlüsselanhänger Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thx All trademarks, logos and brand names are the property of their respective…

Downloads
197
Likes
32
Rating
0
P
PrintablesKrakert

KTM Duke 790 SP connect phone mount

A simple clamp that makes it possible to mount your phone in the center of your KTM Duke 790 using a SP connect mount. Just get one from here:…

Downloads
194
Likes
25
Rating
0
P
Printablesbraga3dprint

KTM coaster holder

Introducing the KTM Coaster Holder: the perfect companion for your KTM coasters. This 3D-printed accessory is designed to keep 6 coasters organized and easily accessible. Crafted with precision, it snugly holds your KTM coasters in place,…

Downloads
194
Likes
53
Rating
5
P
Printablesobservatoer

KTM/Husky Chain Tension Adjusting Helper

For KTM/Husky bikes, the chain tension is measured at the end of the upper chain guide and the distance between the swingarm and the lower side of the chain links shall be between 55mm and 58mm. This guide needs be positioned behind the…

Downloads
191
Likes
15
Rating
0
P
Printablesmarcel293

KTM hitch ball cover

I designed a cover for my trailer hitch ball. It's prepared for multimaterial print. Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Rafts: Yes Supports: Yes Resolution: 0.2 Infill: 15% Filament: Prusament PETG Black

Downloads
190
Likes
22
Rating
0
P
PrintablesKen226

KTM Kick Stand Pad / Plate

Print one of these and keep it under the seat. Next time you park on dirt, this can keep your bike from falling over. Print with at least 50% infill. For a contrasting color logo infill, swap filament at the appropriate layer.

Downloads
189
Likes
21
Rating
5
P
PrintablesCarlos Peña
Downloads
186
Likes
26
Rating
0
P
PrintablesBrandon Hiller

KTM Duke 390 Tail Tidy

I printed in PETG. You'll need a M5x20mm hex head screw and nut to attach the license plate holder to the base.

Downloads
186
Likes
18
Rating
5
P
Printablesosax

Piston circlip tool for KTM motorcycles

If printed with a engineering grade plastic material, this will work once or twice in a pinch… can be extended by a ½ inch shaft in the square hole in the bottom

Downloads
171
Likes
15
Rating
0
P
PrintablesDavid

KTM 690 SMCR screw cap/ Schraubenabdeckung

They are made with such small tolerances that they should just stay on, but incase they are a little bit loose, you could use a tiny bit of sticky tape to fix them into place. Mine hold without any tho. They are for 8mm hex bolts so they…

Downloads
167
Likes
9
Rating
0
P
Printablesdynai

GPS Spacer for KTM Adventure 790&890 / Husqvarna Norden 901

There was a little gap between the mounting point and the Original GPS Mount (KTM Part Nr. 63512992144); this allowed the mount to rock back and forth, which slowly but steadily seemed to loosen the two bolts holding the mount. The part…

Downloads
164
Likes
6
Rating
5
P
PrintablesMižufko

KTM 1090 Adventure R Frame Plug

Frame plug for KTM Adventure R 2 versions no supports needed with logo without logo

Downloads
156
Likes
23
Rating
5
P
PrintablesAnton Gerhardt

Honda ,KTM, Husquarna Öl Trichter 80mm

Ich habe einen Öltrichter für verschiedene Honda, KTM und Husquarna zum verschrauben entworfen, dies hat ein Gewinde von M24x3 und passt auf viele Modelle. Gedruckt wird das ganze mit PLA oder PETG 0.2 15% Infill

Downloads
155
Likes
17
Rating
4.5
P
PrintablesBastien Casetta

KTM 790 Duke – Dashboard Cover / Speedometer Protector

This dashboard cover is designed for the KTM 790 Duke . It protects the speedometer display against scratches, dust, and direct sunlight, while providing a clean look that integrates perfectly with the bike. ✅ Compatible with KTM 790 Duke…

Downloads
153
Likes
9
Rating
5
P
PrintablesBidi01

KTM washer

Nice washers for your KTM Duke or RC. There are some with spacer and some without. Print Settings Printer Brand: Creality Printer: CR-10S Rafts: No Supports: Yes Resolution: 0.1 Infill: 25 Filament: 3D Jake PLA Orange Category: 3D Printing

Downloads
152
Likes
18
Rating
5
P
PrintablesIDVert3X

KTM 390 Adventure Fork Adjuster Dial Cap

I designed this cover to prevent random people walking around my bike from changing my suspension settings. Yes, I'm that paranoid. As an added bonus, it makes the bike look nice, stealthy if you will. It's a friction fit part that…

Downloads
149
Likes
11
Rating
5
P
PrintablesFuzzikago

KTM clutch holder

alternative for the KTM special tool to hold the clutch for assembling or diassembling part no. of KTM is 590.29.003.100 59029003100 ...you have to use a strong material like Nylon, not tested with PETG...

Downloads
148
Likes
20
Rating
5

Porta cellulare Rugged DooGee S99 con supporto per KTM 790 adventure R

Supporto cellulare RUGGED serie DOOGEE S99. (175mm x 18mm x 82mm) Questa versione è COMPLETA di gancio a molla per trattenere il cellulare all'interno dell'alloggiamento. Provato in off-road intenso. La molla è da cercare a parte in…

Downloads
148
Likes
11
Rating
0
P
PrintablesVachy

KTM Superduke 1290 R 2017 frame plug with airtag holder

This is frame plug for KTM Superduke 1290 R 2017 with airtag holder. I recommend print in TPU.

Downloads
145
Likes
11
Rating
0
P
PrintablesBrent

KTM 690 Enduro/SMC R 2012-2018 Headlight Mount

A headlight conversion for the 2012-2018 KTM 690 Enduro and SMC R. This updates the front of the bike to use a 2017+ EXC style front plate and headlight. Required hardware/parts 2x M5 Heat set inserts 2x M5x12mm bolts 2017+ EXC front…

Downloads
142
Likes
12
Rating
0
P
Printablesnakor

Carpuride GPS holder for KTM 1290 super adventure

3D printed Carpuride GPS holder, with holes for screws and nuts. Steel head bolts 6 hexagonal internal Ø5 x L.20 mm

Downloads
141
Likes
5
Rating
0

KTM Coaster (KTM Untersetzer)

Cult silhouette of KTM logo implemented into a coaster. An extraordinary extra for every kitchen and party arrangement. Have fun! Material: PLA Layerheight: 0.2mm Infill: 15%

Downloads
139
Likes
19
Rating
0
P
PrintablesCode_Assassin

KTM 990 Frame Plug

This is a KTM 990 frame plug. There is variance in the tubing diameter of the average KTM frame (less than 0.5 mm). This frame plug has raised ridges to ensure a snug fit. The cut outs will also allow a small amount of flex if the tubing…

Downloads
137
Likes
8
Rating
0
P
PrintablesBerdle

KTM 1290 Super Duke GT Quad Lock Mount (updated)

In my case, when mounting this I found the original KTM display screws too short and so replaced them with some M5 x 12mm Socket Flanged Button Screws (ISO 738002) Stainless Steel (A2) from Accu, along with some 5.3mm x 10mm x 1mm Flat…

Downloads
136
Likes
9
Rating
0
P
Printablesmarcel293

KTM "R" mirror plug

I designed a mirror plug with a R-logo for my KTM 1290 Super Duke R. You can cover the original thread. I also uploaded a version without the logo. Print Settings Printer Brand: Prusa Printer: i3 MK3S+ MMU 2 Rafts: No Supports: No…

Downloads
133
Likes
10
Rating
5
P
PrintablesBMR

KTM 990 & 1X90 Frame Plug

This is a frame plug for KTM Motorcycles. Remixed to fill in lettering but still have a recess for paint.

Downloads
133
Likes
6
Rating
0

KTM enduro/MX grips

See original version for printing suggestions.

Downloads
132
Likes
14
Rating
0
P
PrintablesEgorka555

KTM adapter for draining the engine oil does not stain the motorcycle

The adapter for draining the engine oil does not stain the motorcycle and the environment. Thread M 12x1,5. Lay the motorcycle horizontally with the oil drain bolt at the top. Screw in the adapter and clamp the hose. Stand the motorcycle…

Downloads
132
Likes
12
Rating
0
P
PrintablesTBX

Mounting Bracket TomTom Rider 400/500 series KTM 990 SMR/SMT/Adventure

TomTom Mounting Bracket KTM 990 SMR / SMT (maybe others too) for TomTom Rider 400/450/500/550 series …some screws 'n nuts needed… Handle bar diameter 28mm Show me your makes !!! Yes it's hard to print but unbreakable ....

Downloads
129
Likes
6
Rating
0
P
PrintablespRoy

WP 6500 Fork Compression Adjusting Tool, KTM, GASGAS, Husqvarna

This is a basic tool used to adjust the Compression on a WP6500 cartridge fork. It is very handy since most bikes you would need to remove your handlebars in order to adjust with a flathead screwdriver. This is a flathead tip on a disc.…

Downloads
129
Likes
4
Rating
2
P
PrintablesDarthHeino

Steering stop protector cap for KTM EXC, Gasgas, Husqvarna

In the case of a crash the lower triple clamp hits the steering stop screw causing marks, scratches and sometimes breaks the triple clamp. One of the detailed pictures shows some damages caused by the regular steering stop screw. I…

Downloads
128
Likes
12
Rating
5
P
PrintablesStepanKTM

KTM SUGAR COOKIE CUTTER

SUGAR COOKIE CUTTER

Downloads
127
Likes
13
Rating
0
P
Printablesbafgaf899

Screwed Husqvarna / KTM Oil Funnel for Offroad Models with Logo

Screwed Husqvarna / KTM Oil Funnel for Offroad Models with air release for better oilflow Should fit on all KTM / Husqvarna / GASGAS Offroad & Supermoto models. Feel free to remix to lighten it up or add some features.

Downloads
124
Likes
11
Rating
0
P
PrintablesEgorka555

WALL-MOUNTED CLOCK FROM A KTM MOTORCYCLE BRAKE DISC

Wall-mounted clockfor my garage from the brake disc of a motorcycle KTM TPI 300. The dimensions of the watch mechanism are 57 x 57 x 17.5 mm, you can buy here…

Downloads
124
Likes
26
Rating
5
P
Printablesgrabejud

KTM Duke mirror screw cap

screw cap for ktm duke. (for those using a mirror on bar ends)

Downloads
121
Likes
13
Rating
4.5
P
PrintablesBasementLAB

KTM Classic - Keychain - Portachiavi - Porte Clès - 钥匙链 - Schlüsselanhänger

KTM Classic - Keychain - Portachiavi - Porte Clès - 钥匙链 - Schlüsselanhänger Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thx 04/06/2024 added KTM_Classic 2.stl All trademarks, logos and brand names…

Downloads
121
Likes
11
Rating
0
P
PrintablesLegufix

Cell phone mount KTM 390 Duke & S9+ with bumper

A cell phone mount for using your phone as a navigation device.

Downloads
117
Likes
21
Rating
0