Search results: lcr

Sort order

528 models

Auto accessories w/ Velcro | Securely transport cake, pizza and other precious cargo!

FEATURES Keep precious cargo from sliding and tumbling around in your trunk or car floor. Great for transporting cakes, pizzas, and other important packages. TIP: Use a color that stands out so they don't get lost in the depths of your…

Print approx. €1.48–€1.81 excl. taxPreliminary estimate for one variant

Downloads
152
Likes
122
Rating
0
P
PrintablesMM Printing

Printable Velcro

10000 Downloads! Thanks to everyone who supported this project! I never thought I would reach this number! This is a Remix of Printable VELCRO by eried. I really liked his model, but the only way you can use it is by gluing the pieces,…

Downloads
11,922
Likes
6,383
Rating
4.49
P
PrintablesDavid D

Trunk Velcro Holders

Those simple holders may be applied to your trunk floor using velcro. They will then keep things in place and ensure nothing is flying around in your trunk. The model is intended to be used with 2cm wide velcro. You should be able to get…

Downloads
5,825
Likes
3,177
Rating
4.98
P
PrintablesTeachingTech

Parametric 3D printable velcro

Overview I was amazed by the functionality of the fully 3D printed velcro entered into the recent velcro themed Printables competition: https://www.printables.com/contest/397-hook-loop-prints The winning entry by MM Printing felt…

Downloads
3,499
Likes
806
Rating
4.88
P
PrintablesPrintedGuy

Beautiful and elegant car organizer attached with velcro (for phone, cards, pen)

Here we go again next project for the contest This velcro organizer is specially design to have the most necessary things always at hand. How many times you get in and get out the car? Tired of looking the most necessary things to take…

Downloads
2,809
Likes
1,432
Rating
4.88
P
PrintablesNakozen

MiG-29 Fulcrum Kit Card

The Mikoyan MiG-29 Fulcrum fighter jet, easy one of my top aircraft, ever since I saw it perform at an air show many years ago :') ...which you can now hang from your christmas tree! Came out way better than I expected it to, was worried…

Downloads
2,393
Likes
430
Rating
4.95
P
PrintablesMi Sch

Car trunk fixing element (velcro)

Recomended to print with PET-G, ABS or any car temperature resistant material. You will need to buy 50 mm wide velcro. To atach the velcro to 3d printed holder i used MAMUT glue (one-component adhesive with high adhesion) but i think you…

Downloads
2,149
Likes
1,066
Rating
4.89
P
PrintablesTimTwix

Velcro Stripe (Zip Tie) Cable Holder Screw or Glue

Holder to fix velcro stripe or zip tie by screw or glue. usable for: velcro stripe / zip tie / cable tie width: 10 / 20 mm support: not needed (printed on side -> see picture) material: not defined (PETG/PLA used by me)…

Downloads
1,825
Likes
234
Rating
4.96
P
Printablesross549

ResMed AirSense 10 Wall Mount Bracket Remixed CPAP With Screw and Velcro Mounts

v3: Added corrected brackets for mounting with velcro or command strips, if screw mounting to the wall is not an option. They should print properly now! Get your CPAP off your nightstand! Get it on the level of the mattress, too, if your…

Downloads
1,567
Likes
301
Rating
4.87
P
Printableshachleitner

Prusa CORE One Swing Arm Cable/PTFE Brackets instead of the inelegant Velcros

Prusa CORE One Swing Arm Cable/PTFE Brackets instead of the inelegant Velcro fasteners. If you don't like the cable/PTFE management with Velcro fasteners on the swingarm, here is a more elegant solution using printable brackets (cable…

Downloads
1,407
Likes
420
Rating
4.99
P
PrintablesKimi

Fondor Haulcraft

The Fondor from the Star Wars Andor Show. Owned by Luthen Rael. https://starwars.fandom.com/wiki/Fondor_Haulcraft

Downloads
1,097
Likes
94
Rating
5
P
Printablesjussikal

MOLLE patch plate for velcro

If you have plenty of patches, flags etc but not enough velcro loop are to put them here is you answer: MOLLE compatible plates for your patches. Lite model for stitching a piece of velcro loop to and then attach the whole thing to your…

Downloads
1,026
Likes
359
Rating
5
P
Printablespauldaws

Fulcrum Laptop Stand

Lever type laptop stands Left and Right sides which give a ~10 Degree keyboard angle and raise the screen ~50mm. Designed to work on a Dell M3800 laptop which is15mm thick but should suit laptops up to 25mm. Print Settings Printer:…

Downloads
1,007
Likes
108
Rating
4.27
P
Printableseried

Printable VELCRO

This is the first iteration (third internal) of my attempt to make printable Velcro. It is pretty nice to hang things, probably this small piece will resist much more than a kilogram of weight (hanging weight) and it is very easy to…

Downloads
956
Likes
153
Rating
4.33
P
PrintablesMatthewGTaylor

GoPro Velcro Mount

This handy little GoPro mount attaches your cam to a backpack strap or other object. I made it for backpacking and use it as my only mount out on the trail. It's great for live action shots from your chest strap. Strap it to a small…

Downloads
947
Likes
306
Rating
5
P
PrintablesBowieinc

Plastic Velcro! Super Strong “Hook and Loop” BowieInc Connector!

When I saw the "Velcro" Contest here on Printables.com, I thought it was literally a challenge to see who could make the best 3D Printed Velcro! Well, after seeing that's NOT what everyone was doing, lol, I decided to try. Well, I am…

Downloads
946
Likes
437
Rating
4.75
P
Printablesslavik kopanov

Velcro strap buckle

Introducing my latest creation: A 3D-printed Velcro strap buckle. Key features: You can remix & improve the model freely! All the files are orientated for convenient printing in STEP, STL & 3DM formats! No supports are required! Easy &…

Downloads
912
Likes
247
Rating
5
P
PrintablesSzymon Adamczyk

MIG-29 Fulcrum print-in-place micro jet fighter

About the MIG-29 Fulcrum The Mikoyan MiG-29 Fulcrum is a twin engine fighter aircraft designed in the Soviet Union. It was developed as an air superoirity fighter during the 1970s. The MiG-29 was developed to counter U.S. fighters such as…

Downloads
819
Likes
71
Rating
5
P
PrintablesAlex

Wall Hook for Large Velcro Command Strip

Print with the back of the model on the build plate. I used supports on the strip cavity only. I printed with natural ASA, but any material should be fine. I included the .step and .f3d files in case you want to modify the hook for…

Downloads
737
Likes
55
Rating
5
P
Printablesjurassic73

Velcro Strap Anchor

Post a make if you print this! :) Seeing our creations out in the wild is inspirational knowing it's helping other folks and encourages creators to put more out there. Needed a velcro anchor. Designed these and mount with 1/2" #6 wood…

Downloads
707
Likes
65
Rating
5
P
PrintablesDon_Padlo

LCR-T4 Transistor tester CASE

Корпус для транзистор-тестера LCR-T4. Минимальные габариты, хорошая жесткость. Два варианта исполнения нижней части: под две ячейки 14400 с USB-C зарядным модулем и пустая коробка, в которую поместится 1-3 14500, 1-2 18650 или стандартная…

Downloads
688
Likes
37
Rating
5
P
PrintablesFusing Passions

Velcro Cable Management Base

Small base for cheap Velcro straps that can be hotglued under the desk for neater cable management.

Downloads
622
Likes
164
Rating
4.75
P
PrintablesKevin D

Velcro Cable Tie Mount

30x30 mm mount for velcro cable ties (up to 16mm width), which can be either glued or screwed onto a surface.

Downloads
606
Likes
72
Rating
4.75
P
PrintablesKasaTheWolf

Under-Desk Cable Management Solution for 10mm Velcro

Description: Declutter your workspace with my under-desk cable management solution! This 3D-printed accessory is designed to keep your cables organized and out of sight, providing you with a clean and organized work environment. Features:…

Downloads
553
Likes
115
Rating
5
P
PrintablesBullware

HSW - Alt Rotate - 3M Command Strip Mount / Command Velcro Wall Triple Insert

Landscape mount for HSW environment. Two choices, one for standard single use command strips and one for use of velcro command strips . Thanks to Spatula for the inspiration.

Downloads
551
Likes
91
Rating
5
P
PrintablesTORX1

Collection of Cable Tie Holder and Velcro Strap

This is a Collection of Cable Tie Holder and Velcro Strap For Screws or Double-Sided Adhesive Tape. Chamfer down and standing printing.

Downloads
541
Likes
90
Rating
5
P
PrintablesJerryie

Printable velcro tapes

Hey guys, after tons of updates I would like to introduce you a printable alternative for hook & loop. Voilà! Easy to use - you just need to stick it on flat sides to whatever you need removable and hanging (I used a glue gun). Also, feel…

Downloads
510
Likes
161
Rating
4.4
P
PrintablesYouCanCallMeAl

Fishing Waste Line Collector (No Velcro, snap version)

Remix of smaller snap version of "Fishing Waste Line Collector" by sthone that does not use velcro and has improved fit.

Downloads
500
Likes
51
Rating
5
P
PrintablesHenrik

LCR-T4 Case

Case for the LCR-T4 with power switch, parts tray and extra connector for external functionality. The extra connector is optional, it gives you the option to make a plug to attach test leads for testing components that don't fit in the…

Downloads
488
Likes
43
Rating
5
P
PrintablesBlkWgn

Keurig K Cup Coffee Pod Holder - 12 cup - Command Strip Velcro

This is something I did in Fusion 360 a few years ago during the 2020 shutdown. I originally printed this on my Airwolf Axiom machine and was never really happy with the print quality, but have been using it ever since and the…

Downloads
484
Likes
65
Rating
5
P
PrintablesJeffrey

Cable Tie and Velcro holder for Honeycomb Storage Wall (HWS)

This remix allows the use of cable ties and velcro straps with the honeycomb storage wall. Two directions are provided for each, to allow horizontal an vertical placements Best printed in PETg (PLA will also work) does not need any…

Downloads
478
Likes
128
Rating
4.8
P
Printableseried

LCR-T4 ESR Meter Case Re-Redesigned

The original design fitted my LCR T4 but it was not perfect. You still need to print the bottom case from the original design. Print instructions This is the one I ordered https://s.click.aliexpress.com/e/_DlLbzqD different vendors have…

Downloads
476
Likes
29
Rating
5
P
Printablessecv

Fishing Waste Line Collector (No Velcro)

A remix of "Fishing Waste Line Collector" by sthone that does not use velcro. Instead, thread the fishing line into the holes of the inner cylinder. Compatible with the original M3 screw version files. CHANGES Outer Cylinder: improve…

Downloads
469
Likes
68
Rating
5

Velcro Desk Tidy Cable Management Bracket

This bracket has been designed to use a 20mm wide velcro strap to hold cables in place. The internal shape ensures no supports are required when printing and makes it easy to slide the strap through the loops without any hassle. Bracket…

Downloads
398
Likes
283
Rating
5
P
PrintablesWilliam

Car trunk fixing element (velcro) with 2-3 ribs remix (source files included)

Remixed it with 2 and 3 ribs to have it firmer for heavy load, so I can use less of them. Print it with the holes on the plate (like the original one). Print settings Material: PETG (or any other material that can handle the load).…

Downloads
337
Likes
71
Rating
5
P
Printablesxvilla
Downloads
336
Likes
30
Rating
4.8
P
PrintablesRandyLahey

Durable SCX24 Velcro Body Mount Upgrade

This is upgrade part to replace the pins on SCX24 trucks with a flat plate that velcro or magnets can be attached to. This was inspired by the mounts the newer bronco model. There are multiple adjustment points to allow more flexibility…

Downloads
325
Likes
26
Rating
5
P
PrintablesPBateman

Dillon Bellcrank Cube 13871 (plastic white square in powder bar Dillon 550 / 750)

This is my first ever published model, and yes, it's literally a square with a hole in it. I recently got a Dillon 550 and when I had powder issues I saw this stupidly small white square had fallen onto the floor - somewhere. I managed to…

Downloads
321
Likes
14
Rating
5
P
PrintablesWim V

Ergonomic Sanding Pad (for Velcro sanding discs 5"/6" - 125/150mm)

Sanding using this pad feels natural. With an almost flat hand resting on the curved surface you can sand without tightening your fingers. This allows you to effortlessly sand for hours without cramping your hand or fingers. The Velcro…

Downloads
304
Likes
287
Rating
5
P
PrintablesSheriff02

LCR-T4 Tester with Battery lead

LCR - T4 (Transistor, Capacitor, Resistor, etc.) Tester case with the addition of a separate opening compartment for a 9V battery type 6F22. It is recommended to position the parts when printing as indicated in the 6th image and use…

Downloads
296
Likes
19
Rating
4.67
P
PrintablesModery

Fondor Haulcraft (Flying)

Remix of the existing model, simply “closed the door” and removed the legs

Downloads
285
Likes
22
Rating
0
P

Boss Pedal Velcro Baseplate

Boss pedals have a rubber foot and information label that don't play nicely with adhesive velcro tape. This part allows you to easily mount to a pedalboard without any additional hardware. Remove the four Phillips screws from the bottom…

Downloads
282
Likes
32
Rating
4.6
P
PrintablesPavel Riedl

Velcro Clip

Občas se hodí variabilní upevnění kabelů. Třeba proto, aby se neváleli po zemi. Toto je klip pro ‘škrk’ pásek šíře max. 20 mm. Připevňuje se vrutem D3 nebo oboustrannou lepicí páskou šířky max. 20 mm. Vytištěno jest z PETG (není…

Downloads
273
Likes
49
Rating
4.88
P
PrintablesMeister Edel

Strong Velcro Strap Holder

Yesturday I helped a good friend to improve his Camper. Therefore I printed some Velcro holders to mount the Solar Panel & its Cable securely to a wall. The holders are for different widths of velcro and very strong. (I hang myself onto…

Downloads
257
Likes
144
Rating
5
P
Printablescomputer22

20mm velcro cable tie holder / mount

Please leave a ♥ Like if this print was helpful to you :-) A simple design that takes a 20mm velcro cable tie from either side and holds cables in place somewhat safely. Recommended to print with PLA. Print Settings Rafts: No Supports: No…

Downloads
248
Likes
33
Rating
5
P
PrintablesRed Haniwa

LCR-T4 Case with 18650 battery

Changes in this remix: Removed bay for 9v battery to create space to add a 18650, TP4056 charging board and boost converter board. Make the opening for power switch smaller to use with my switch. (from 12.9x19.5 to 8.8x13.6 opening)…

Downloads
233
Likes
32
Rating
5

Pokemon inspired, Alcreime, Tabletop DnD miniature

IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Pokemon inspired, Alcremie, Tabletop DnD miniature with or without 25mm medium base which can be used for DnD and…

Downloads
223
Likes
32
Rating
0
P
Printablesmengu

multiboard/underware cable tie velcro snap

designed as a low profile alternative for official snaps. fits velcro ties up to 12 mm wide

Downloads
220
Likes
45
Rating
5
P
Printables6d6178

Velcro Mount for Ikea Skadis

A strong mount to attach Velcro / hook and loop loops and straps to IKEA SKÅDIS pegboards. It is a remix of the Velcro Clip by Pavel Riedl that has been adapted to work with Skadis T-Nuts for easy and secure installation on Skadis…

Downloads
215
Likes
103
Rating
5
P
PrintablesGeorge

Prusa CORE One Plus Swing Arm Extension & Integrated Cable Brackets (No-Velcro Remix)

This remix was created to achieve a cleaner aesthetic and better cable management for the Prusa CORE One Plus . I have unified two popular designs to permanently eliminate the "inelegant" Velcro straps provided by default, ensuring that…

Downloads
211
Likes
67
Rating
4.93
P
PrintablesAdam L

Tea Bag Dispenser : Version for Command Strip, Velcro, or Magnetic adhesive

I realized the parent could use some different attachment methods, this one is for command strips or velcro or adhesive mag strips. The cutouts for the default model are 0.5 mm deep x 19 mm wide, to accommodate a wide variety of possible…

Downloads
209
Likes
38
Rating
5
P
PrintablesDomesticHacks

LCR-T4 Part Tester Case (MTester)

In addition to the printed parts, you will need: 4x M3 Screws 4x M3 nuts 2x Small magnet (8x3mm) You may also need some tape to make the tester board a little bit thicker since depending on your printer, the board fit could be a little…

Downloads
204
Likes
20
Rating
5
P
PrintablesSim Fishing

LCR-T4 ESR Meter Case Re-Redesigned

Added 9V battery compartment and some descriptive text on the front panel

Downloads
202
Likes
15
Rating
5
P
PrintablesUltr3chT

Steamdeck Project Killswitch Velcro Strap Brace for Power Banks

This is a trimmed-down version of the Steam Velcro Strap Brace for Power Banks modified by making it for the Killswitch case by Dbrand. If you own a Killswitch case you no longer need to use deckmate accessories, just attach the item you…

Downloads
197
Likes
26
Rating
0
P
PrintablesgoTVm

Velcro cable tie mount (lighter, faster and just as sturdy)

This is, currently, the most time and material efficient design (takes half as much time and plastic) Velcro cable tie mount design on Printables. While thinner and lighter, it's just as sturdy and durable. Can be stuck to any surface…

Downloads
190
Likes
24
Rating
5
P
PrintablesLeoRc

Wltoys 12428 bellcrank steering FINAL

Hi, wltoys 12428/12429 owners, I believe you do know that steering is not perfect in those models, and here is the ultimate solution to resolve all the issues ;) Enjoy, share your prints, suggest improvements, and be safe! What you need…

Downloads
189
Likes
24
Rating
5
P
PrintablesMattWasHere

Yet Another LCR-T4 Case

Finally decided that the LCR-T4 meter rolling around on my desk needed a case. Wanted a "toolless" case, so here it is. I used this switch from jaycar: ultra-mini-rocker-switch . Model is based on this case by Phenomen however this is a…

Downloads
181
Likes
15
Rating
2.5
P
Printablesnova++

1U rack cable management velcro tiedown point

I wanted a cleaner way to run a few cables along my small server rack and made this little part. You just put a velcro cable tie through the middle part to hold cables on. Zip ties would work too, but I don't really like zip ties for such…

Downloads
178
Likes
31
Rating
5
P
PrintablesLupo

Ruger LCRx 3inch Holster "The SideWagon" - Modular Attachements

Revolver Holster for my Ruger LCRx 3inch Modular Spine System -> Yesss heavy influence from TREX ARMS Sidecar 2.0 The Spine System has Loops & Spaces in 0.25 inch / 6.35mm increments The “Friction Washer” is not necessary to print. The…

Downloads
174
Likes
22
Rating
5
P

Transport/Access Card Velcro Wallet Attachment

We've all seen them. those sleek, minimalistic and modern 3d printable wallets. they're pretty cool. customisable, cheap, easy to replace… but sometimes you have the need for speed… Introducing this card holder for your office pass,…

Downloads
173
Likes
57
Rating
5
P
PrintablesDR 3D

Traxxas Rustler 2WD Steering Bellcrank

This is the piece of the steering assembly that attaches to the servo on a 2WD Rustler. Compatibility: Traxxas Bandit Traxxas Drag Slash Traxxas Nitro Slash Traxxas Rustler 2wd Traxxas Slash 2wd

Downloads
172
Likes
31
Rating
0
P
PrintablesLelleB

Traxxas Slash LCG velcro battery tray

I wanted to use velcro in my Traxxas Slash and Traxxas Rally with LCG. I designed it to use original screws and to be secured with double sided tape in the middle for extra strength. The double sided tape also helps to keep the distance…

Downloads
171
Likes
21
Rating
5
P
PrintablesScatterthought

Oculus Quest 2 controller Pistol Grips with Velcro Straps

These remixes add mounting points to MarkL's excellent pistol grips for the Quest 2 controllers. There are two versions. Version 1: socket mount Version 1 is designed for these 12" elastic cinch straps , and should work with any 1"-wide…

Downloads
169
Likes
30
Rating
5
P
PrintablesStanley

LCR-T4 Case

LCR-T4 Case for original or customized version like mine with ICSP connector from bottom side and micro switch replaced by rotary encoder. ICSP pins are reversed - special cable reduction is required. Original project:…

Downloads
169
Likes
7
Rating
0
P
PrintablesPeter Farell

Luthen Raels Fondor Haulcraft : Andor : StarWars

Luthen Raels Fondor Haulcraft : Andor : StarWars

Downloads
167
Likes
34
Rating
5
P
Printablestheo

LCR meter housing (ARCELI LCR-T4)

A simple case for a cheap LCR-meter from amazon. Look for “ARCELI LCR-T4 ESR Meter” to see the type, there are also different ones with different mounting holes. You can use M3x5mm bolts to fix the board, just directly screw them into the…

Downloads
167
Likes
13
Rating
5
P
Printablesjustusk18s

Octoprint Console Raspberry Pi 3 B 5" inch Elcrow touch screen with fan cooling

THIS IS A COPY - I copied this from thingiverse, because I very much like the design and have printed it myself. It was originally created by monkeypantman. Again: This is not a Remix, it is a copy. RELEASE VERSION So here it is, V3.1 of…

Downloads
166
Likes
23
Rating
0
P
PrintablesMaximM2

LCR T4 Transistor Tester Enclosure

Yet another enclosure for transistor tester. Designed for LCR T4 chinese clone (yellow PCB and a button in right bottom side). The battery compartment is located on top for easy access and quick battery disconnection e.g. to reset device.…

Downloads
165
Likes
8
Rating
0
P
PrintablesPantstorm

LCR-T4 Case

The laser cut acrylic case that comes with the cheap LCR-T4 meter found on ebay cracked, so I challenged myself to learn Fusion 360 and model my own. Prints easily without supports, print the front half with the face down and the back…

Downloads
164
Likes
11
Rating
3.5
P
PrintablesUranoxyd

LCR-Meter / M-Tester / LCR-T4 Case

This is a housing suitable for the component testers known as M-Tester or LCR-T4. The area for identifying SMD components is not accessible. 4 M2.3 and 4 M2 self-tapping screws are required for assembly. For my application it works really…

Downloads
164
Likes
13
Rating
0
P
PrintablesNovemberKou

LCR-T4 Component Tester Case

I looked for an LCR-T4 case with the following features, but couldn't find one, so I made it myself. Built-in battery No need to remove screws when replacing the battery Battery and screws are hidden Access to terminals for measuring…

Downloads
160
Likes
15
Rating
5
P
Printablesqwwerty

Velcro mount point anchor

Needed a mount point / anchor for cable routing. Designed for 2cm wide velcro strap, such as Solarix SXSZO-20MM-25M-BK but can be used for zip ties, etc. For routing only! Weight bearing not guaranteed. Available in two options: a)…

Downloads
155
Likes
24
Rating
5
P
Printableschappyman66

Iso-Fulcrum Artin Chassis

I took the original chassis, added a hinge, and freed up the entire center section. It should work like the original Cox Iso-fulcrum chassis design. Update 10 Feb 2019: Improved hinge design. Category: Hobby

Downloads
152
Likes
8
Rating
4
P
PrintablesGruthius

Hair Dryer Holder for Command Velcro Strips

Modified AmicoJeko's model to thicken the base slightly to fit command velcro strips rather than the standard strips that would leave an exposed pull tab. The velcro ones can be completely invisible. The strips I used are 20mm wide and…

Downloads
151
Likes
20
Rating
0
P
PrintablesJames

Remix: EZPass Toll Tag Holder w/Velcro Cutouts

Some minor tweaks to jimerb's original design Added cutouts to accommodate the Velcro on the bottom. Removed the little tabs on the sides because they are very delicate and don't do much. I used these radar detector suction cups; they fit…

Downloads
147
Likes
24
Rating
5
P
Printableshummi

Fire extinguisher (Feuerlöscher) velcro holder

34b Fire extinguisher holder for velcro tape to mount it on car interior.

Downloads
141
Likes
34
Rating
5
P
PrintablesStanley

Tiny e-Lab LCR-T4 tester

This is remix of https://www.thingiverse.com/thing:2999383 LCR tester model: LCR T4 (PCB dimension: 60mm x 72.6mm) BoM: 1x LCR T4 tester PCB 4x 2.5x6mm screws (for PCB) 1x XT60 connector male 1x XT60 connector female 1x Vigan 24.102.4 - 2…

Downloads
141
Likes
16
Rating
0
P
PrintablesG-ManTech

Parametric Velcro Anchor

Parametric OpenSCAD Model to create customizable anchors for Velcro Straps. Can be printed without supports if desired.

Downloads
137
Likes
23
Rating
0
P
Printablesraketqueen

FNIRSI LCR-P1 - Tester Case remix from xvilla

This case is a remix from @xvilla_2875915 FNIRSI LCR-P1 Transistor and Capacitor tester parametric rugged case. Nothing special in the print parameters of this design for the remix is the added logo and details of the tester information…

Downloads
131
Likes
14
Rating
5
P
PrintablesMaru

Car trunk velcro divider

Simple fixing element for boxes and stuff flying around the car trunk. The printed part can be flexed in the middle so it can be used as straight holded or use it fo corner fixing. Be sure to use PETG or similar in order for the part to…

Downloads
131
Likes
27
Rating
0
P
Printablesstrudelkopf

Printable Velcro - Larger Sizes (prototypes)

Remixed larger sizes, prototypes, please read description

Downloads
131
Likes
28
Rating
0
P
PrintablesDmitry Sorkin

Fingertip Protector with Velcro Strap – Work Guard for Injured Finger

Protective fingertip cover for people with an injured or damaged fingertip. Slides over the wounded finger and locks in place with a Velcro strap, so it stays put while you work. Absorbs accidental knocks and impacts, letting you keep…

Downloads
126
Likes
69
Rating
0

Pokemon inspired, Milcrey, Tabletop DnD miniature

IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Pokemon inspired, Milcrey, Tabletop DnD miniature with or without 20 mm small base which can be used for DnD and…

Downloads
124
Likes
25
Rating
0
P
PrintablesT.L.S

Steam Velcro Strap Brace for Power Banks - For Deckmate

A Steam DeckMate compatible print to strap devices to such as power banks, USB-C Hubs, or NVME drives) as an alternative to the universal puck. Use Velcro cable ties for a non-permanent method of attaching devices; I suggest buying a bulk…

Downloads
117
Likes
16
Rating
5
P
PrintablesWdA

LCR T4 Case for Electronic Component Tester LCR M328 T4 Mega328

This is a case for the electronic components tester LCR M328 T4. The case has 2 parts, an top and a bottom part that are connected by screws. You wil need to assemble it : 8 pcs. screws M3 x 25 8 pcs. nut M3 I printed it in ABS but I…

Downloads
115
Likes
10
Rating
5
P
Printablesbinarypickle

Sanding Mouse with velcro indents

Remix of original model sanding mouse to add indents for 3/4 inch velcro strips.

Downloads
113
Likes
12
Rating
4
P
PrintablesDžino

Case for Tester LCR-T4

Case for Tester LCR-T4, 3D print, material ABS, 4 pieces M3 x 5mm, PC conector, 6 * 6 * 5.5 micro switch. Created by dzino.

Downloads
112
Likes
9
Rating
0
P
Printablesshr00mie

Server Rack Cable Management Velcro Mount V2

This 3D-printed Server Rack Cable Management Velcro Mount offers a simple yet effective way to keep your network and AV cables organized. Designed to fit standard server rack configurations, this mount allows Velcro straps to pass through…

Downloads
112
Likes
22
Rating
0
P
Printablesraviolish

Velcro Cable Tie Mount with Vice Clamp

This model allows you to mount a velcro tie to a table without needing glue/tape/screws. This came in handy as I wanted to manage cables behind a desk that had cheap veneer on the edges. Adhesive was peeling the veneer off and I didn't…

Downloads
112
Likes
58
Rating
0
P
PrintablesLolcio

Car Trunk Holder with Velcro

Use self adhesive velcro at the bottom. It can be adjusted to various shapes. It will hold a box in the corner, a bottle, a container of windshield washer fluid or a shopping bag. Thanks to the hinge, the possibilities of adaptation are…

Downloads
112
Likes
14
Rating
0
P
PrintablesRenba

Thing ico LCR T4 Tester (123 1111) Easy Print Housing

Hi ! I finally received my tester ESR T4 from Aliexpress, I started looking for a box for this small circuit. After having printed and tested several boxes, I was disappointed because they were either difficult to print or not very…

Downloads
111
Likes
14
Rating
3
P
PrintablesDerKuchenmann

Sortimo L-Boxx wall mount with velcro mount

Sortimo L-Boxx wall mount with velcro mount ; 50mm velcro I recommend my second design..see Remix

Downloads
110
Likes
23
Rating
0
P
PrintablesScrambler77

Creality CR-10 Smart Fulcrum Printhead

Creality CR-10 Smart Fulcrum Printhead This is a custom, complete, fully reversible replacement of the printhead, featuring a full-metal MicroSwiss hotend, a Bondtech LGX-Lite in directdrive setup, dual part fan (and fanducts), hotend…

Downloads
109
Likes
23
Rating
5
P
PrintablesLordTheCAndy

Sew on Velcro / Annähbarer Klett

I watched a german youtube video about 3D printed velcro and i had the idea to make it sew on. The nice part is that the other half because it is made out of plastic is glueable on everything. So one side is connected to cloth and the…

Downloads
107
Likes
44
Rating
0
P
PrintablesCupo

TP-Link Tapo C200 - Flat mount (Velcro)

TP-Link Tapo C200 / C210 mount with flat side to mount on objects using velcro or glue. I remixed this part do attach the Tapo C200 on my cable surface mount box using velcro. Printed with support. Remix based on TP-Link Tapo C200 various…

Downloads
105
Likes
12
Rating
5
P
Printableskrx

Command Strip Velcro Anchor

Simple velcro anchor that fits on a 3M small command strip. I made these with velcro one wrap ties in mind, but a thin zip tie might work as well. Use these for cable organization where you don't want to screw into something Printed with…

Downloads
103
Likes
16
Rating
0
P

Quick & Dirty Sorting Trays | Storage Tower with Velcro

Stackable sorting trays with lids to secure them for storage or travel - This is modular to fit your needs! I made these mainly to help keep my work space clean and organized with the possibility to expand them as my needs change in the…

Downloads
100
Likes
68
Rating
0
P
Printablesmoddok

Velcro L-Bracket

A little easy-to-print thing that prevents stuff from flying around in the trunk. Easy to adjust in slicer or with the .setp file. Just use velcro tape to fix in your trunk.

Downloads
99
Likes
68
Rating
5
P
PrintablesGloomsen

Velcro strap holder

I am not a fan of cable ties and prefer to use Velcro. So I have designed a simple holder. This model is designed for a Velcro width of 2cm. It can be attached with either double-sided tape, glue or a simple screw. It's a little frickelic…

Downloads
98
Likes
16
Rating
5
P
Printablessteamtronics

Velcro Wrap Strap Handle

This handle is to help organize and hang any cords or hoses. It's a hassle to carry a 100 feet hose. With the handle, I can easily hang the hose and keep a cleaner space. I got the Velcro or hook and loop strap from Harbor Freight. It's…

Downloads
97
Likes
54
Rating
0