2,017 models
What is this [ Update 3: Added variants without interlocks after a specific user request.] [ Update 2: Added a larger triple hex cup after a user suggested it. Check the file section.] [ Update 1: Added two variants with greater wall…
Print approx. €1.33–€1.63 excl. taxPreliminary estimate for one variant
What is this [ Update3: A couple of more variants were added after recent user requests. 1) Now there are models with a 1x3 and a 2x3 footprint including larger lids. They should work the same way as the other variants and should be fully…
Print approx. €1.33–€1.63 excl. taxPreliminary estimate for one variant
A standard and dual screwgate locking carabiner, using a print-in-place pivot mechanism, and available in multiple sizes . The STLs for three different sizes of each style are included here for convenient printing. This model is fully…
Print approx. €0.82–€1.00 excl. taxPreliminary estimate for one variant
Object Description: It comes too late for the prusa design contest end of 2021, but here's my version of a bag clip. Advantages: - Stable hinges - Wobble-free hinge design - Easy to close - It clamps reliably even thin bags - Marble…
Print approx. €1.76–€2.15 excl. taxPreliminary estimate for one variant
This box is inspired by Japanese locking lid tool boxes. This is an ingenious locking mechanism and it is simple yet elegant. Your fitment may vary. Depending on 3D model settings and different filaments, you may have to slightly adjust…
Print approx. €6.82–€8.34 excl. taxPreliminary estimate for PETGSource material: PET
Want to support me? Interested in the PCB holder shown in the picture and want to support me? Check out Stickvise, my low profile soldering vise: Information: http://www.stickvise.com Buy it on Amazon: http://amzn.to/2dgmQCE Summary Ball…
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
This model went thru several iterations to offer a perfect fit, a print without support, a fast printing time and a fit that allows easily installing the clips and stacking the boxes. You may also place the clip over the reinforcers…
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for PETGSource material: PET
Overview The GoPro quick release buckle has been an important component of the GoPro mount system since time immemorial. Somewhere around the release of the GoPro Hero 5, GoPro introduced a new version of the quick release buckle that had…
Print approx. €0.72–€0.89 excl. taxPreliminary estimate for PETGSource material: PET
Overview A simple retractable and locking spool for holding 20m of 3mm paracord with built-in storage on the back for hanging hooks/clips to use on the line. I would love to see any makes so please post some pics, you get prusameters too!…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
I designed this to replace the clip in my car that started to fall apart. This design is split into 3 components: Locking Sunglasses Holder Sun Visor Clip (3 optional sizes). I recommend not using PLA as it will likely warp in on a warm…
Print approx. €1.05–€1.29 excl. taxPreliminary estimate for one variant
This model went thru several iterations to offer a perfect fit, a print without support, a fast printing time and a fit that allows easily installing the clips and stacking the boxes. You may also place the clip over the reinforcers…
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for PETGSource material: PET
I needed a strong wall mount that would hold my coat hanger on the wall without visible screws. I first saw this design: Strong Universal Wall Mount , but didn't like the idea of my children disassambling the coat hanger by accident. So I…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for PETGSource material: PET
A very strong and resistant box with a lid and a 3 points lock system to be sure that it will not open until you decide to. The openig procedure is a three-fingers interaction with the hinge so the box is hard to open until you know how…
Print approx. €2.51–€3.07 excl. taxPreliminary estimate for one variant
This was my first ever designed object using Fusion 360 and has been really popular over at that other "things you can print" site. At the time, we didn't have a lot of space and the printer lived in the bedroom. I was astonished that my…
Print approx. €0.47–€0.57 excl. taxPreliminary estimate for one variant
Demonstration video: This is a single piece clothespin with a compliant lock mechanism that allows for a sturdy and safe hanging and clamping. Print instructions This print is optimized for PETG and does not work well with PLA for its…
Print approx. €0.70–€0.86 excl. taxPreliminary estimate for PETGSource material: PET
This is a remake of the Universal Rewinder by https://www.thingiverse.com/VincentGroenhuis, https://www.thingiverse.com/thing:3338467 which was taken a step further by Blargedy https://www.thingiverse.com/thing:3867357 which gave me the…
Print approx. €2.91–€3.56 excl. taxPreliminary estimate for PETGSource material: PET
This Model is designed to be mounted on different surfaces with M4-screws. It also has a self-locking-mechanism.
Print approx. €2.04–€2.49 excl. taxPreliminary estimate for one variant
A token to block a board space when a player uses the "The Voice" card in the board game Dune: Imperium. Could be need of 2 tokens at a time. Category: Games
Print approx. €0.35–€0.42 excl. taxPreliminary estimate for one variant
Infos: tolerances between parts: 0,2mm Insert the magnets at the right position and orientation so they pull each other used magnets (5x2mm) since V3:…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for one variant
Audi A4 Avant B7 locking clip for the warning triangle hatch
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for PETGSource material: PET
DF65 Keel locking *Keeps the DF65 in place and transport..! Print 2 pcs.! Also nessesity with this:…
Print approx. €1.54–€1.88 excl. taxPreliminary estimate for PETGSource material: PET
I hate having to unclip my batteries to remove them from storage and liked the look of this model. So, I decided to remix it to my tastes. The indent removal allows you to slide batteries in and out easy! The slight upward angle will help…
Print approx. €4.15–€5.08 excl. taxPreliminary estimate for PETGSource material: PET
This model represents a generic industrial interlocking concrete block system , inspired by real-world construction and infrastructure elements, commonly used for retaining walls, temporary structures, ballast containment, and industrial…
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for one variant
Print your own advent calendar with a stylish hexagon-look and add some 3d-printed flair to the holiday season! Perfectly sized for a daily dose of a small chocolate treat (I ended up using Lindor Truffles). I've added all the files to…
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant
Bunnies! Just in time for Easter This collection of models contain the same Interlocking Bunny Pattern. It's designed from scratch with 3D printing in mind and can be placed on pretty much anything you can imagine. I've supplied the base…
Print approx. €0.82–€1.00 excl. taxPreliminary estimate for one variant
CZ: Samosvorné víčko pro jogurt (Lidl Pilos). I když z mé strany byla snaha vytvořit co nejvíce univerzální model, nesedí na úplně každý kelímek (stejný výrobek, stejná značka). Doporučuji proto model vytisknout ve více velikostech…
Print approx. €3.17–€3.87 excl. taxPreliminary estimate for PETGSource material: PET
I remixed the amazing original design to add a coin slot and thus turn it into a piggybank. A very strong and resistant box with a lid and a 3 points lock system to be sure that it will not open until you decide to. The opening procedure…
Print approx. €4.24–€5.18 excl. taxPreliminary estimate for one variant
UPDATE: 2/09/2024 Updated the Top, Middle, and Bottom interlocking nameplate holders (INH). Files are: TOP INH-7.stl, MID INH-7.stl, BOT INH-7.stl I removed the embedded TOP,MIDDLE,BOTTOM text and replaced with a simple up arrow ^ in the…
Print approx. €3.46–€4.23 excl. taxPreliminary estimate for PETGSource material: PET
Remix of simple hole cover that should be compatible with any AeroGarden product. Additional layers on the top of the cover (base of the print) completely block out the light, reducing the possibility of algae growth in the water…
Print approx. €0.75–€0.92 excl. taxPreliminary estimate for one variant
Replacement for this rod you need to lock the Hamax Caress (and possibly other stuff?) to your bike. I lost mine for some reason, so remodeleted the original one from our other bike in SolveSpace. It prints rather terribly due to the…
Print approx. €0.68–€0.83 excl. taxPreliminary estimate for one variant
This cubes consists of interlocking pieces that come together to form a stable and precise shape. The parts are designed to complement each other perfectly, seamlessly fitting together. The clever design creates a fascinating interplay of…
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for one variant
I like the idea and design of the SHOPVAC (50mm) CAMLOCK CONNECTORS WITH MAGNETIC CATCH by PeterH, but after printing it with PLA and 0.3mm layers, the hose connector and the male adaptor would not fit together. So I redesigned the male…
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for PETGSource material: PET
Helps push bits of stuck paper through a shredder - scale it to fit your shredder!
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant
This project combines math and 3D printing: A cube is split into interlocking puzzle-like parts. Students calculate dimensions, apply geometry and symmetry, then design, print, and test the pieces.
Print approx. €1.85–€2.26 excl. taxPreliminary estimate for one variant
UPDATE March 2023: There is now a v2 of this model that is attached magnetically (turns out the locking prongs in this one tend to be a bit fragile and can snap off if mistreated). ---- A funnel to help filling 58.5 mm protafilter baskets…
Print approx. €2.45–€3.00 excl. taxPreliminary estimate for PETGSource material: PET
The Gerber Principle knife comes with a clever modular sheath that allows the user to choose between two different types of belt loop, and they attach to the rest of the sheath using a locking plastic spring fork. The one I bought was the…
Print approx. €0.73–€0.90 excl. taxPreliminary estimate for PETGSource material: PET
PLA works.The cover may be a little tight at first.
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
This cube consists of two interlocking pieces that come together to form a stable and precise shape. The two parts are designed to complement each other perfectly, seamlessly fitting together. The clever design creates a fascinating…
Print approx. €1.85–€2.26 excl. taxPreliminary estimate for one variant
A Print-In-Place Storage Pod Ball with self-locking action. The perfect size for storing the DUMMY 13 models. Setting the INFILL Top and Bottom Fill Pattern to Octogram Spiral will give your pod a unique design!!
Print approx. €2.17–€2.66 excl. taxPreliminary estimate for one variant
These NEW over-engineered Prusament spools are just so versatile! They normally assemble with bayonet-style twist-lock sides that require a 3D printable tool to open . This over-engineered lid system uses the spool's center hub (plus a…
Print approx. €3.14–€3.84 excl. taxPreliminary estimate for PETGSource material: PET
This simple key helps you lock and free your aisin hubs Print should be on it's side 100% infill PETG recommended
Print approx. €3.44–€4.21 excl. taxPreliminary estimate for PETGSource material: PET
A holder for the mechanically closing container, this can be attached to the thread board. Currently only for the 100mm. Printed in PLA with DRAFT 0.28 and 15% Infill
Print approx. €2.22–€2.72 excl. taxPreliminary estimate for one variant
This is an anchor for fixing the Prusa i3 printer onto the shelf. After you mount the printer, rotate the anchors 90 degrees, and the printer is locked. I'm creating an enclosure for the printer (not completed), and I want to fix the…
Print approx. €2.88–€3.52 excl. taxPreliminary estimate for PETGSource material: PET
As the locking mechanism of my Ikea Tärnö table broke (soft metal + thread = bad), I designed a replacement part. It's working with an hex M6 bolt (lengths of 15mm to 20mm will work) and a wing nut. The screws of the existing mechanism…
Print approx. €0.57–€0.69 excl. taxPreliminary estimate for one variant
Ikea Mulig drying rack lift anti-slide lock. I experienced this when I lifted the rack around. This lock keeps the rack locked when it is lifted, preventing the drying rack from sliding and wrinkling the clothes.
Print approx. €0.29–€0.36 excl. taxPreliminary estimate for one variant
I printed this joystick for our Weidemann Bj. 2005, because the old one was broken. Possibly print with edge/brim so that it adheres well to the print bed. It is tapered on the inside so it should sit well on the mount. I printed ours in…
Print approx. €1.09–€1.33 excl. taxPreliminary estimate for PETGSource material: PET
EN: Insert the locking stops (1 to 4 pieces as required) into the holes around the adjustable pin. From the front of the pliers you put on the cap that serves as a locking stops holder and everything secure with a clip at the other end.…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for PETGSource material: PET
The original backdrop file is great, https://www.printables.com/model/440256-lightweight-poster-paper-backdrop but the connection between the backdrop arms and the paper is loose and can fall apart if handled incorrectly. To solve this, I…
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
Two nesting hoops with a slight V tape on the outside. Can be used to fix a flexible thin material within the hoop similar to an embroidery hoop. One use might be to make a temporary cover for a bowl of food.
Print approx. €0.75–€0.92 excl. taxPreliminary estimate for one variant
This is a spare locking clip for my Multiplex transmitter tray rain cover “SpaceBox”. I printed in ABS, layer 0,15mm, brim+ support, standing on one side ( so to have the maximum resistance when the clip gets pushed in.
Print approx. €0.56–€0.69 excl. taxPreliminary estimate for one variant
Joola FALCON TABLE unlocking part Spare Part is a part of the following ID: R-1-11510-71-167 As Joola couldn't or wouldn't provide me with a spare part for the unlocking mechanism, a friend and I designed the broken part. Printed in two…
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant
Design Update The red clip shown on the right side of the second image is the KLIPPT Locking Cable Clip, which succeeds this earlier KLAMMA model. KLIPPT introduces a separate, versatile base plate that enables multiple mounting options,…
This is an updated version of my redesign of emmet's totally mind-blowing print-in-place iris box (sadly, the link on Thingiverse to his original design seems to be dead). My original design lacked a locking mechanism to keep it from…
FYI if you scale the model down it will not fit together Collection of Interlocking fidget toys, Square, Cone, Hourglass, Ball I like to print PT1 in matte and PT2 in silk, it really makes it looks great!
This is a remix of "The HIVE" from Thingiverse. I printed out "The HIVE" but the connection was too loose for me. For this reason, I created a new model with 0,2mm tolerance and add different sizes and inserts. Print instructions 0,3 mm…
We are thrilled to announce the release of our successor to KLAMMA, the culmination of countless hours of design work and dedication. This new version represents a significant milestone in our journey, building on the strong foundation…
Added locking points so you can lock it into positions in 45 degree increments. It improves the durability of the stand to hold positions; it seems to hold up much better than the original. It should be printed at a .15mm layer height.…
Snap-fit ball joint with locking nut - Giunto Sferico ad incastro con ghiera di blocco Compact, reliable, and easy to assemble. The T-SSIC features a snap-fit spherical joint secured by a threaded locking collar (clamping ring). Ideal for…
Christmas ornament or holiday fidget toy. There is a hole in the top to feed a string or ornament hook to hang from your tree just download the "snappable" version. In this version the two pieces snap together so it can hang from a…
This model uses my locking pegboard mount system for 1" standard pegboards. Magnet holes (if present) are designed for 10mm diameter, 3mm thick magnets. “Board Attachment” parts are universal to all models. Print with 3 perimeters and…
UPDATE 12/17/24 - Added a non-holiday knob and container. Now this can be used for any occasion! UPDATE 12/14/24 - Added a second knob. You can now choose between the original snowflake or the new holly knob! This gift box uses a double…
NEW VERSION: I've rewritten this drying rack clip from scratch! Fully customizable to fit any rack. Check it out! Tired of struggling to fold your clothes airer? The innovative Folding Rack Latch is the solution you've been searching for.…
The original print (without the lock) was a request from someone, then the lock for the handles was a request from more people, I figured why the heck not? Sounds easy right? After a couple of design attempts I was able to get one that…
Locking bed leveling knob for the ender 3 s1/s1 pro. This design has snap features that keep the knob in place during/in between prints; so no more vibrating out of position or accidentally nudging the knob. The snap features also give…
An upgrade on the automatic tensioner. When I put up a tarp, I like to set my “static” line to a tree and then pull in a direction away from that static line (in other words: toward the tarp), so I made mine have a 180 ° degree turn back…
This is a remix of the tea bag dispenser by gkmakeit. The dispensers can interlock together and stack together. It is also faster to print and uses less material (if bottom is printed semi-solid). Printed in PLA at 0.2mm layer height with…
Key Trap Interlocking puzzle by Christoph Lohe Assemble the various pieces into the lock shape shown in the cover photo. The key is looped around the shackle so that they are permanently bound together, but can move freely against each…
Think I'm Awesome? ~ https://buymeacoffee.com/triplegworkshop No more scaling! New bases added. I've been told each side is beautiful and useful on it's own. I mostly want options to print multi-color on my single-color MK3s. Don't push…
If you'd like to support me you can post a make, comment and/or pay me a coffee at PayPal , @paulorfo (Venmo), $paulorfo (Cash App) -------------------------------------------- @Jameserroo made this interesting and elegant latch. I…
Gravity-Locking Hanger A simple and practical hanger designed to hold towels, cloths, and other lightweight items securely without the need for hooks or clips. Features: Automatic locking: A gravity-powered ball mechanism holds the towel…
I made a goal of designing a functional, fully 3D-printed caster that can swivel and lock the wheel. The wheel diameter is 4" so it's quite large. Although it actually functions pretty well, it won't be able to roll under much load. I did…
Why Make Yet Another Cable Clip? I tried the very popular Klamma cable clip, and while the design is really clever, I felt it was too flimsy, especially if not mounted to a flat surface, it would open on its own quite easily. So I made…
Introducing a latch that can be locked by turning the handle. This practical design is perfect for securing doors, windows, or other elements that require additional protection. Features: Locking by Turning : The latch handle can be…
Recommended Settings: 3 Walls, 20mm/s slow first layer, NO supports. This is an EXPERIMENTAL FABRIC and having pieces come off while printing is normal! You may have to restart or try a smaller model. Brims are not advised. Feel free to…
This interlocking hearts decoration is a clean and elegant 3D printable model symbolizing love, connection, and togetherness. The smooth heart outlines and solid base create a timeless decorative piece that fits beautifully in modern,…
This is a modification of standard Voron 0.2 spool holder, made foldable. It's locking into folded position and extended position. This holder is extended from the standard one and should fit spools up to 85mm. Personally, it's a lot…
Two part print, can be printed in any material. Lower heat filaments might warp in the presence of hot water, probably not dishwasher safe unless done with low temperatures. A lower layer height is recommended to avoid spots for water to…
I started playing around again in Shapr3D on my MacBook and managed to come up with another interesting fidget toy design almost by accident. This one uses two interlocking spiral parts that twist together in a few different ways. The…
🔧 Real Utility Knife Remix – Compact, Locking, One-Hand Operable This is a thoughtfully re-engineered remix of the excellent original model: https://www.thingiverse.com/thing:3677766 I made several key improvements to enhance…
I designed these components for a Smartphone holder ( http://www.thingiverse.com/thing:1778271 ). I thought that other people might find the ball and socket assembly to be useful for one of their projects. Unfortunately, I resized it a…
MX-5 MX5 Miata Cam Gear Locking Tool by BEAVIS For B6/BP engines (NA/NB MX-5 miata, or some of the other mazda's of similar vintage such as 323)
This is a custom sized hinged lid box that is easy to print. No supports or assembly is required and can be printed on nearly any FDM printers' default settings. If you need a specific size feel free to leave a comment, I can generate…
The Honeycomb wall attaches to the side of the Prusa Enclosure, to provide attachment point for any of the HSW compatible tools. The sub panels lock together to create one continuous uninterrupted Honeycomb Wall. No need for…
This stackable and interlocking bottle rack is perfect for reusable water bottles, wine bottles, travel mugs, and any other circular object with comparable diameter. The cell has a little more internal space than similar storage systems,…
I was always frustrated with the original Lack Enclosure because the knobs were constantly falling off, and the hinges were not holding the doors well (especially, when you lift the enclosure, the doors could just fall off). I got an idea…
Printed in PLA. No supports.
I like how Ace_D remixed the Switch portrait holder with the comfortable grip. However after printing his design I found several issues. The right handle is largely separate from the center piece. The console fit is very tight. There is…
Print in TPU for the rubber feel. Change infill and wall layers depending on required softness or stiffness. Concept is not printed yet. Support might not be needed, depending on print pattern. 2mm width of each web. I have to test print…
Heyho I really haven't found a 100% satisfactory solution yet to keep my cordless screwdriver in continuous operation. (Mine doesn't have a factory fitted locking function for this and Velcro wears out quickly) Today I designed this…
I could not find an acceptable 3D printable rivet, fastener for my Crocs' strap so I decided to make my own. Printed in PETG with 0.10mm layer height, no support. Please enable sequential printing at Print settings - Output options -…
I use these clips currently to keep the wires around my desk from getting caught under my desk chair wheels. The clips self-lock when closed. Print them on their side, no supports. I recommend printing them with several walls so there is…
A ball and socket joint with a locking ring. Configurable, and can be adapted to be used as an OpenSCAD library.
After printing the wreath at 200%, I noticed that the connections were a little bit more loose than I would like. So, I designed some locking studs that can be used to lock the wreath parts together - while still allowing you to take them…
Introduction: Since the big Lego Purge, it was really hard to get any rail design from the internet, until now. Ive constructed any curved standard rail, “almost” in compliance with the L-Gauge standard (…
You need to print two as they fit back to back, to make it easier to install and remove I wet sanded the back half to remove any layer lines which could cause them to lock up. Lock the camshaft drive belt pulleys together when removing…
This is a basic blocking tool for crocheting Granny Squares to keep them all the same size and with straight edges. I designed this tool in OpenSCAD so that anyone can download the program OpenSCAD and adjust the parameters in the file.…
For the best print possible I recommend using the original body, paired with the v2 beak (tighter tolerance), and the v2 feet (stronger and easier to balance). And for the feet I recommend painting supports on the floating area of The…
The real thing: https://www.youtube.com/watch?v=rHfkeAuvooY Update: New youtube link Update: includes a .stp file of the base block and form, and allowed remixes in the license of the model, so you can modify the design for your block…
Use these caps to cover locking nuts in a variety of applications. Minor adjustments to the size can be made to the model in the slicer to fit your exact setup. Happy Printing
Version 2 improves on my original locking stand in several ways. Much more freedom of movement with 15 degree increments of movement, as opposed to the 45 degree increments of V1. More sturdy locking mechanism with very little sag. No…
