Search results: lowe

Sort order

13,141 models

P
PrintablesThinkable

Realistic Skull Candy Bowl | Halloween Skull Decoration

Awesome Skull Bowl for Halloween candy/decoration. I would love to see your makes! Post them below. This is easily one of the coolest 3D prints I've done. It was designed for no supports, but I would use supports of at least 75+ degree…

Print approx. €13.56–€16.58 excl. taxPreliminary estimate for one variant

Downloads
50,553
Likes
10,571
Rating
4.96
P
Printablesrorys3D

Sunflower fabric coaster

Another fabric coaster. This time circle shaped and inspired by sunflower seeds arrangement. It is surprisingly very flexible and addictive to play with. Just be careful not to put your thicker fingers deep in the center, it's quite…

Print approx. €2.34–€2.86 excl. taxPreliminary estimate for one variant

Downloads
40,796
Likes
10,500
Rating
4.94
P
PrintablesLXO

Lowest poly The Thinker

A low poly model for 3D-printing of Rodin's Le Poète , The poet in English, and commonly know as The Thinker . Print instructions All three models somewhat complicated prints but the easy to print one uses bridges for the worst overhangs,…

Print approx. €14.65–€17.90 excl. taxPreliminary estimate for one variant

Downloads
21,124
Likes
6,311
Rating
4.92
P
PrintablesSASSy Design

Tradicional crystal - Pot and planter for plants and flowers - vase mode print

A nice tradicional pot and planter for plants or flowers. Best to be printed in 2 or 3 layered vase mode settings - material: PLA Happy printing! :D

Print approx. €1.52–€1.86 excl. taxPreliminary estimate for one variant

Downloads
12,617
Likes
2,940
Rating
4.96
P
PrintablesOld Lady

Mini Pumpkin (Thanksgiving/Halloween)

Ein kleiner Kürbis zur Dekoration oder als kleines Geschenk, mit einem kleinen Loch im Stiel zum Aufhängen. Für den Druck benötigen Sie keinen Multi-Extruder, da Kürbis und Stiel separat gedruckt werden. Um den Stiel am Kürbis zu…

Print approx. €0.05–€0.06 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
10,294
Likes
1,984
Rating
4.79
P

Moon Lamp (Commercial Use Allowed)

Please read the entire text before printing! I often make the mistake of not doing so. If you like the model, consider supporting my future projects: https://boosty.to/artificialworld/donate . 1. Model: Moon Appr. diameter: 210 mm…

Print approx. €6.56–€8.02 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
10,204
Likes
3,200
Rating
4.98
P
PrintablesDaniel Josvai

Vase mode Jack-o'-lantern - Halloween pumpkin lamp

If you're running late with your Halloween decoration or just don't want to use up half a spool of filament for a decent sized pumpkin then these models were made for you! I've designed these Jack-o'-lanterns as a late entry for the…

Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant

Downloads
9,175
Likes
1,585
Rating
4.88
P
PrintablesSASSy Design

Cactus Flower Pot Planter for Plants

A nice and quick pot/planter for your lovely plants! they will love it We suggest printing it in a dubble layered vasemode - the outcome is nice and rather quick :D Happy printing!

Print approx. €1.76–€2.15 excl. taxPreliminary estimate for one variant

Downloads
8,929
Likes
2,247
Rating
4.97
P
PrintablesBamBam Design

Sunflower Windmill - Customizable System

The Sunflower Windmill - Self adjusting Sunflower wind turbine Link to the Official Ball Bearing Mod Information about model maintenance: Due to the considerable administrative effort involved in managing models across different…

Print approx. €0.96–€1.17 excl. taxPreliminary estimate for one variant

Downloads
4,688
Likes
1,633
Rating
4.89
P
Printables3D servis

Flowers Slide Hair Clip

I recommend heat, bending and curving the flower piece a bit for easier fit. My next hair clip. Previous Bee & Honeycomb Slide Hair Clip is here

Print approx. €0.70–€0.86 excl. taxPreliminary estimate for one variant

Downloads
4,638
Likes
1,545
Rating
4.82
P
PrintablesConr8r

Flower Lampshade with Posable Petals - Easy to Print & Assemble

This floral lampshade is easy to print and assemble. Designed to be compatible with an IKEA Hemma socket, this lampshade makes for a striking overhead light or can be easily set up as a tabletop accent light. Every petal in the lampshade…

Print approx. €0.71–€0.87 excl. taxPreliminary estimate for one variant

Downloads
3,761
Likes
1,745
Rating
4.49
P
PrintablesSaddamCZ

Sunflower Cookie Cutter

A three piece sunflower cookie cutter. The three piece design allows you to achieve the desired impression depth in the middle part regardless of the thickness of the dough. Or you can cut out the center part completely and swap it…

Print approx. €3.62–€4.42 excl. taxPreliminary estimate for one variant

Downloads
3,196
Likes
661
Rating
4.88
P
Printablessquinn

Flower Hair Pin

A fun little flower at a cute size (under 5 cm in diameter) that can be used as a hair accessory by sliding a standard bobby pin into the provided slot. This is a quick and easy print (no supports required), and comes in at under 6 grams…

Print approx. €0.81–€1.00 excl. taxPreliminary estimate for one variant

Downloads
3,103
Likes
567
Rating
4.92
P
PrintablesMelix

Skull earrings halloween

If you enjoy my designs, please consider a donation: https://paypal.me/melix3d all profits will go towards my local animal shelter .

Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant

Downloads
2,945
Likes
830
Rating
4.87
P
Printablesrorys3D

Sunflower coaster holder

I have been planning to make this model for a long time, the model complements my existing sunflower fabric coaster ( https://www.printables.com/model/285153-sunflower-fabric-coaster ). The holder should hold 4 to 6 coasters. For better…

Print approx. €1.80–€2.20 excl. taxPreliminary estimate for one variant

Downloads
2,787
Likes
706
Rating
4.98
P
PrintablesSASSy Design

Diamond Planter & Pot for plants and Flowers - Vase mode

An Art deco ispired planter or pot for plants. Best to print in vase mode (can be single or dubble layered - depends on the size) Happy printing! :D

Print approx. €1.50–€1.83 excl. taxPreliminary estimate for one variant

Downloads
2,627
Likes
680
Rating
4.95
P
PrintablesWilko_SLO

Valentines flower pot

Print with z=0.3 PLA or PETG Put in flowers, pencils, sweets or…., love. W

Print approx. €10.88–€13.30 excl. taxPreliminary estimate for one variant

Downloads
2,454
Likes
309
Rating
4.67
P
Printablessteve457

Milwaukee M18 Stubby Nozzle - FUEL Blower Model 3017-20

This is a stubby nozzle for the Milwaukee M18 FUEL Blower. This nozzle is for the NEW blower model (3017-20) that Milwaukee just released in 2024. I couldn't find one available for this model yet, so made my own. I was able to get it to…

Print approx. €13.60–€16.62 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
2,313
Likes
209
Rating
5
P
PrintablesMachspace

Tradescantia plant leaves and flowers bookmark

This bookmark features the leaves and flowers of the tradescantia , which is also known as the wandering jewel, inchplant, or dayflower. (I think it's probably tradescantia zebrina .) I originally designed this as a gift for my friend ,…

Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant

Downloads
2,090
Likes
455
Rating
4.86
P
PrintablesRomano Ruggeri

Sunflower Clock

Printed in PETG in various colors , some parts 0.3mm layer to reduce time ,hands 0.2mm layer, all parts without supports . The link between petals are printed using Tansparent Petg , needed to avoid petal movements The total width of the…

Print approx. €0.18–€0.22 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,955
Likes
888
Rating
4.86
P
PrintablesMuddledRemarks

Super Stubby Nozzle for Milwaukee M18 Fuel Blower

Designed a super short nozzle for my M18 Fuel blower to help with cleaning tasks around the shop. People also like these nozzles for drying their cars after washing. I printed at 1.5mm line width using a 0.8mm nozzle and 0.3mm layer…

Print approx. €3.91–€4.78 excl. taxPreliminary estimate for one variant

Downloads
1,831
Likes
230
Rating
5
P
Printablesel_caspien

Wall art vase with flowers

Wall art vase with flowers

Print approx. €7.05–€8.61 excl. taxPreliminary estimate for one variant

Downloads
1,810
Likes
657
Rating
4.67
P
Printablesprodigy8

Wall Art - Flower Rabbit Easter

Wall Art - Flower Rabbit Easter

Print approx. €2.36–€2.89 excl. taxPreliminary estimate for one variant

Downloads
1,713
Likes
343
Rating
4.9
P
PrintablesYosuke

Short flat nozzle for Makita blower DUB185

A short flat nozzle for Makita 18V blower DUB185. I made this for drying car/motorcycle after washing, but someone may have another way of use. I made 2 versions that have different opening area (740 mm2, 538 mm2). I'm still testing which…

Print approx. €2.08–€2.55 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,679
Likes
201
Rating
4.86
P
PrintablesMuddledRemarks

Super Stubby (SWEEPER) Nozzle for Milwaukee M18 Fuel Blower

Designed another super short nozzle for my M18 Fuel blower to help with cleaning tasks around the shop. This one has a sweep/broom/wide opening, especially useful for drying your car. I printed at 1.5mm line width using a 0.8mm nozzle and…

Print approx. €4.45–€5.44 excl. taxPreliminary estimate for one variant

Downloads
1,208
Likes
143
Rating
5
P
PrintablesCalebTimoteo

Frankenstein Candy Bowl - Halloween (Decoration)

Any feedback would be greatly appreciated . Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (organic/tree support) Scale it as you like :)

Print approx. €25.42–€31.07 excl. taxPreliminary estimate for one variant

Downloads
1,173
Likes
261
Rating
4.91
P
Printablesjudysek

pavučina dekorace, spider web decoration for halloween

dekorace k vytvoření duchařské atmosféry

Print approx. €0.85–€1.04 excl. taxPreliminary estimate for one variant

Downloads
1,110
Likes
114
Rating
4.83
P
PrintablesFC2M3D

Floral Detail Halloween Skull Keychain (Remix)

I printed in PLA Infill: 15% Layer Height: 0.10mm Supports: Yes, organic If you like my work consider Buy me a coffee 😊

Print approx. €2.40–€2.93 excl. taxPreliminary estimate for one variant

Downloads
963
Likes
139
Rating
5
P
PrintablesMiguelB.

sunflower seeds bowl / Bol para pipas, pistachos, etc.

Un nuevo diseño inspirado en: https://www.printables.com/es/model/678105-pistachiopeanut-bowl El diámetro es de 160mm , suficiente si los imprimes al 80%, en las fotos aparecen impresos al 100% y al 80%. Los archivos gcode tienen letras…

Print approx. €2.29–€2.79 excl. taxPreliminary estimate for one variant

Downloads
909
Likes
96
Rating
5
P
PrintablesIdea Prints

Valentines Day Blooming Flower Gift Box

🎁Valentines Day Blooming Flower Gift Box 🎁 LINK MY REMIX→ https://www.printables.com/it/model/392721-valentines-day-blooming-flower-gift-box Nozzle 0.4mm Print 0.2mm quality → 0.15 Infill 15% Support ❌ Brim ❌ Here are all our plans, take…

Print approx. €6.81–€8.33 excl. taxPreliminary estimate for one variant

Downloads
889
Likes
189
Rating
5
P
PrintablesSASSy Design

Flower Plant pot and Decor Planter - Vase mode design

While thinking of new ideas we realized that we never made a Flower flowerpot! So... We made one! We hope you like it! Used Filament: This model was printed using Urban Grey Matt PLA from FormFutura The FormFutura team was so nice to send…

Print approx. €2.78–€3.39 excl. taxPreliminary estimate for one variant

Downloads
818
Likes
229
Rating
5
P
Printableshebel78

Flower pot

The GCODE file contains a model in vase mode with dimensions X 100mm, Y 100mm, Z 60mm. Thickness and flow of the outer wall 0.65mm 150%, bottom of the pot 1.08mm, initial layer 0.28mm.

Print approx. €1.65–€2.01 excl. taxPreliminary estimate for one variant

Downloads
796
Likes
147
Rating
5
P
PrintablesKutte

Halloween-Lamp/Halloween-Lampe

Small table lamp for electric tea lights with interchangeable side panels. Printed in PLA I printed the lamp on both the Prusa MK04 and the Bambu A1 Mini. As you can see in the pictures, only the Prusa MK04 has the fine struts in the side…

Print approx. €0.94–€1.15 excl. taxPreliminary estimate for one variant

Downloads
793
Likes
315
Rating
5
P
PrintablesPeter Farell

Crucifixion in Retz, Lower Austria - 1727

Crucifixion in Retz, Lower Austria - 1727

Print approx. €6.54–€8.00 excl. taxPreliminary estimate for one variant

Downloads
754
Likes
206
Rating
0
P
Printablesfoxylion

Cookie Cutter: Flower

Cookie cutter of a flower Print Settings Rafts: No Supports: No Resolution: 0.2mm Infill: doesn't matter Filament: PLA Notes: Print with a 0.4mm nozzle and 0.45mm line width.

Print approx. €0.51–€0.63 excl. taxPreliminary estimate for one variant

Downloads
734
Likes
76
Rating
5
P
Printables75echo

Print approx. €9.26–€11.31 excl. taxPreliminary estimate for one variant

Downloads
691
Likes
115
Rating
4.5
P
PrintablesCalebTimoteo

Pumpkins - Halloween (Decoration) Vase Mode

Spiral Mode/Vase Mode You can print it with: Nozzle 0.4/0.6/0.8mm (You can print 0.8mm line width with 0.4/0.6 mm nozzle) Layer Height 0.2mm/0.4mm (Recommended) Bottom Layers 4-10 Layers Scale it as you like :) happy fall season

Print approx. €1.07–€1.30 excl. taxPreliminary estimate for one variant

Downloads
665
Likes
256
Rating
4.67
P
PrintablesPeter Farell

Goku with Halloween Fox Costume.

Goku in Halloween in Fox Costume. Added Goku2.3mf and associated gcode on 8/30.2023. overall .4 offset with extra .6 offset at base of tail. From: Dragon Ball FighterZ. Added deep UV Textures.

Print approx. €20.82–€25.44 excl. taxPreliminary estimate for one variant

Downloads
614
Likes
133
Rating
5
P
PrintablesCalebTimoteo

Cauldron Bowl - Halloween (Decoration)

Any feedback would be greatly appreciated . Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (organic/tree support) Scale it as you like :)

Print approx. €28.20–€34.47 excl. taxPreliminary estimate for one variant

Downloads
589
Likes
144
Rating
5
P
Printableshebel78

Flower pot

Print in vase mode. The GCODE file contains a scale model with dimensions X 80, Y 80, Z 60. Outer wall width 0.65, outer wall flow 150%, base thickness 1.08mm, initial layer thickness 0.28mm, main layer height 0.2mm.

Print approx. €1.41–€1.72 excl. taxPreliminary estimate for one variant

Downloads
579
Likes
66
Rating
5
P
PrintablesFC2M3D

Cute Sunflower Keychain

Easy to make a cute Sunflower keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊

Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant

Downloads
537
Likes
88
Rating
5
P
PrintablesFreezingPixels

Freezing Pixels - Small Geometric Flower Pot Set

A set of three different geometric flower pots, ready to print in Spiral Vase mode! Large: 13cm Medium: 10cm Small: 5cm Print instructions Best printed in prusament galaxy black in Spiral Vase mode 0.2mm layerheight!

Print approx. €2.20–€2.69 excl. taxPreliminary estimate for one variant

Downloads
532
Likes
70
Rating
5
P
PrintablesEngGraph

Halloween Vampire Teeth

Vampire Teeth – 3D-Printed Halloween Accessory Perfect for your vampire costume: these lightweight, reusable vampire teeth are 3D-printed and, with PLA Glow , deliver a spooky glow-in-the-dark effect. Easy to print, quick to assemble, and…

Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant

Downloads
521
Likes
48
Rating
5
P
Printablesdiesim

Happy Halloween

Happy Halloween !!!

Print approx. €1.39–€1.70 excl. taxPreliminary estimate for one variant

Downloads
521
Likes
128
Rating
5
P
PrintablesMHe

Wall Mount for MAKITA Cordless leaf blower DUB184 or DUB362

I printed it (also) in PLA, PETG or others more solid materials would be a better decision, IMHO. It turns out this device wasn’t really made to lean against the wall, so I did what any person with a 3D printer would do: I printed a wall…

Print approx. €1.79–€2.18 excl. taxPreliminary estimate for one variant

Downloads
517
Likes
19
Rating
5
P
PrintablesMonster Made

Halloween Headband

Print with PLA 0.2mm QUALITY Infill 15% Bed Temperature 70 for without printer enclosure No support needed Printing orientation please check with gcode file

Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant

Downloads
510
Likes
172
Rating
4.9
P
PrintablesKutte

Pumpkin_Lamp - Halloween- Kürbislampe für elektr. Teelichter

Pumpkin lamp for table decoration e.g. on Halloween. !!Attention only use with electric tea light!! The tea light I use is 45mm by 45mm by 45mm in dimensions and fits easily. Works absolutely great and looks great. I uploaded two variants…

Print approx. €0.80–€0.97 excl. taxPreliminary estimate for one variant

Downloads
490
Likes
35
Rating
5
P
Printableshellgy

Cute halloween bat headband

No support needed, stick some nice googly eyes :) tip for prusa mini : remove the skirt, you can print it at 100% (adult size)

Print approx. €0.78–€0.96 excl. taxPreliminary estimate for one variant

Downloads
484
Likes
128
Rating
4.89
P
PrintablesBooks

Flower Coin

Coin with engraved flower symbol. Uses art from PublicDomainVectors.org .

Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant

Downloads
390
Likes
61
Rating
5
P
PrintablesJPMakesStuff

Blower air intake cover for Ryobi P755TH

Prevents things (usually my pants or shirt) from getting sucked into the air intake. Snap-in fit, removable Suggested print settings: - 0.20mm QUALITY - Prusament PETG (pictured using OVERTURE PETG Grass Green ) - Infill density 20% -…

Print approx. €0.82–€1.01 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
385
Likes
48
Rating
5
P
PrintablesIsThisPrintable

Lowest Poly David

Inspired by LXO's fantastic “lowest poly thinker” (https://www.printables.com/de/model/1165-lowest-poly-the-thinker) (you should really check it out, it is probably my favourite 3d-model) i decided to create my own lowest poly statue, so…

Print approx. €4.68–€5.72 excl. taxPreliminary estimate for one variant

Downloads
379
Likes
75
Rating
4.8
P
PrintablesEric BEAUGUITTE

Stackable Flower Pot including Plant Saucer

05/23/2024: Plant Saucer has been added *************************************************** This model can be print without any support and all parts can be print into a PRUSA MK3S+. For the “Pot spacer”, you could print 2 at the same…

Print approx. €3.77–€4.61 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
354
Likes
135
Rating
5
P
PrintablesMurat

Prusa i3 MK3S better blower shroud with double anchor

This is a better blower shroud with double anchor points preventing it to sag. It is also a bit larger to prevent it from melting. Print instructions ABS 0.2mm layer hight with first layer at 0.3mm 100% infill Support under the extending…

Print approx. €0.89–€1.09 excl. taxPreliminary estimate for one variant

Downloads
296
Likes
36
Rating
4.75
P
PrintablesDrak

Easter Bunny Wall Art Window Decoration with Flowers and Butterfly - Drak

Check out rest of my Easter decorations here --- Commercial Use --- By purchasing this design on Cults , you support my work and receive a commercial license to sell physical 3D prints of the model Click here to purchase the design and…

Print approx. €3.87–€4.72 excl. taxPreliminary estimate for one variant

Downloads
289
Likes
61
Rating
0
P
PrintablesSASSy Design

Curtain wavy parametric flower vase

A simple parametric vase design

Print approx. €2.66–€3.25 excl. taxPreliminary estimate for one variant

Downloads
284
Likes
47
Rating
5
P
Printablesprintinghappy

Creepy See-Through Halloween Spider

See-through spider with just the right thickness (1mm) to be flexible. Decorate your house or scare the kids. Easy and fast print (20min). Print instructions Feel free to scale this up or down but 1mm thickness (z-axis) is recommended.

Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant

Downloads
271
Likes
26
Rating
4.75
P
PrintablesPeter Farell

Vampire Flower

The Vampire Flower that only opens on the full moon.

Print approx. €2.39–€2.92 excl. taxPreliminary estimate for one variant

Downloads
270
Likes
71
Rating
0
P
PrintablesHermannSW

Shroud for AMD Instinct MI50 workstation GPU and BA10033B12H BBQ blower fan

Instinct MI50 BBQ blower fan shroud JSCAD share link There is a new sticky “Radeon Instinct MI50” thread on mersenneforum.org (registering needed for access): https://www.mersenneforum.org/node/1072920 Used Radeon [pro] vii GPU prices are…

Print approx. €1.56–€1.91 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
263
Likes
14
Rating
5
P
PrintablesPeter Farell

The Night Halloween Candy Bowl : La Nit, Museu d'Art de Cerdanyola

The Night Halloween Candy Bowl : La Nit, Museu d'Art de Cerdanyola The original statue design has been deformed to make the bottom part of the dress more bowl like. UV displacement added to scan.

Print approx. €14.76–€18.04 excl. taxPreliminary estimate for one variant

Downloads
240
Likes
64
Rating
5
P
PrintablesCarl

Fractal Flower pot

I didn't have the idea for this type of design, but it's still entirely designed by me. The idea comes from virtox (link below). This is my contribution to the Gardening Tools Contests. Link :https://www.thingiverse.com/thing:28050

Print approx. €3.68–€4.49 excl. taxPreliminary estimate for one variant

Downloads
240
Likes
50
Rating
3.5
P
PrintablesdaGill

Spooky Halloween Pumpkin Decoration

This spooky Halloween pumpkin was created in Blender v2.93 to have spooky/ organic design. With help from the wireframe and subdivision surface modifiers, the ghostly holes were created around the sides of the pumpkin to bring the final…

Print approx. €4.34–€5.30 excl. taxPreliminary estimate for one variant

Downloads
227
Likes
43
Rating
5
P
Printablesmstejska

flowerpot with leaves

flower pot with leaves design dimensions: diameter 100mm height 100mm

Print approx. €10.75–€13.14 excl. taxPreliminary estimate for one variant

Downloads
215
Likes
43
Rating
0
P
PrintablesFC2M3D

Angry Halloween Ghost Keychain (Remix)

I printed in PLA Infill: 15% Layer Height: 0.10mm Brim: No Supports: Yes, organic on build plate only Seams: Back/Rear If you like my work consider Buy me a coffee 😊

Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant

Downloads
213
Likes
45
Rating
0
P
PrintablesToOmue

Herb / Flower Planter Stand | Kräuter / Blumenständer

In times when everyone is talking about ecological thinking and CO2 emissions, we belong a little bit in this discussion with our 3D printers and the plastic we use for them. In combination with the Upcycling competition of Prusa I had…

Print approx. €3.82–€4.67 excl. taxPreliminary estimate for one variant

Downloads
208
Likes
191
Rating
4
P
Printablesfifindr

Flower Of Life Coaster

Enjoyed this model? Support me at buymeacoffee.com/fifindr to keep the designs coming! Elevate your space with this intricate Flower of Life coaster! With a 100 mm diameter and 4 mm height, it’s perfect for protecting surfaces while…

Print approx. €1.07–€1.30 excl. taxPreliminary estimate for one variant

Downloads
207
Likes
43
Rating
5
P
PrintablesMetikumi

Nonagonal Flower Pot in Various Sizes

In various Asian cultures, the number nine is revered, symbolizing longevity, eternity, and completeness. Inspired by this profound cultural significance, the Nonagonal Flower Pot emerges as a celebration of the number nine's symbolic…

Print approx. €20.36–€24.89 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
206
Likes
32
Rating
0
P
Printablestom

Stütze für Pflanzen (Kräuter, Blumen, Gräser,...)/ Support for plants (herbs, flowers, grasses,...)

Eine simple und variable Stütze für Pflanzen, die ich hauptsächlich im Freien nutze, wenn meine frisch geplanzten Küchenkräuter noch ein wenig Halt benötigen. Translation: Deepl A simple and variable support for plants that I use mainly…

Print approx. €0.72–€0.88 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
202
Likes
32
Rating
5
P
PrintablesMS_D3sign

Halloween pumpkin charm with a smile for Crocs - (SpookyStep Collection)

🛠 Materials & Hardware: PLA Combo Black & White -> [ https://amzn.to/4t0FgJ4 ] PLA Overture Orange - > [ https://amzn.to/4n2pegj ] Other Designs in the Collection:…

Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant

Downloads
197
Likes
54
Rating
5
P
PrintablesNikosSprocket

X500 Quad Drone Lower Leg connector

This is a replacement for the lower leg joined for a X-500 style quad drone. This part will work for https://amzn.to/41AV1Jv (500-X4 Carbon Fiber Quadcopter Frame Kit). It will fit any X-500 drone that uses 16mm (OD) down tube for leg and…

Print approx. €1.58–€1.94 excl. taxPreliminary estimate for one variant

Downloads
197
Likes
16
Rating
5
P
PrintablesWolvie

Diglett and Dugtrio Flower Pots

“I wanna be very best! Like no one flower pot ever was!” Yeah, I created a Diglett and Dugtrio Flower Pots for everyone, who love Pokémons! I took and remodeled one original model by CobraCrafts from Printables and made it into a simple…

Print approx. €9.78–€11.95 excl. taxPreliminary estimate for one variant

Downloads
192
Likes
46
Rating
5
P
Printablesjudysek

Ozdoba ucha halloween, ear adornment

ozdoba ucha, dle potřeby možno vytvarovat teplem

Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant

Downloads
185
Likes
56
Rating
5
P
Printables3DJG

Flower sensory tray

Toy. Sensory tray for kids. Choose the model you like best.

Print approx. €5.29–€6.46 excl. taxPreliminary estimate for one variant

Downloads
184
Likes
46
Rating
5
P
PrintablesMakkuro

Crocs Halloween name charms / jibbitz

Use these spooky crocs charms / jibbitz, available with 1250 different first names on your Crocs to customize them! If a name is missing or you need other words, you can easily create the STL using the included OpenSCAD file (See…

Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant

Downloads
179
Likes
39
Rating
0
P
PrintablesTwirlygrlandMom

Ghostie Earring Set - Spooky Halloween Jewelry

We designed and printed these earrings quickly this week as an accessory before school. Size up or down but watch the size of the post hole. We included the gcode, so you can also go straight to your printer. I like to print at .2 layer…

Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant

Downloads
177
Likes
47
Rating
0
P
PrintablesJoergH

Metabo LB18 Laubbläser - Flachdüse gebogen - Leaf Blower Nozzle

Für Metabo LB18 Laubbläser - Flachdüse gebogen. Die Düse wirkt auf den Fotos so klein: Auf dem letzten Foto sieht man aber, das die Düse einen Großteil der Druckfläche einnimmt… Perimeter:6 Top/Bottom:6 Kein Support Filament: Flashforge…

Print approx. €9.94–€12.15 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
177
Likes
13
Rating
5
P
PrintablesChillyPenguin

Thule Roof Bar Lower Cover Strip

Anyone with Thule WingBar will know how important the little filler pieces are to stop whistling. So when I needed to replace the lower cover strips on second hand Thule WingBars. Rather than purchasing replacements decided to 3D print…

Print approx. €0.19–€0.23 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
176
Likes
30
Rating
5
P
PrintablesMS_D3sign

Woven Halloween Basket with Handles (SpookyBasket)

Pumking Version: https://www.printables.com/model/1437632-pumpkin-halloween-basket-spookybasket ------------------------------------------------------------------------------------------------------------------------------- Get ready for…

Print approx. €17.84–€21.80 excl. taxPreliminary estimate for one variant

Downloads
174
Likes
55
Rating
0
P
PrintablesmoWerk

Minimal Flower Cover Pot (Cache-pot / Übertopf)

While loving the design of Paul Ds flower pot, i needed a version to print without supports reduce filament use since my application is just a cover for plant pots with low requirements regarding structural strength resize non…

Print approx. €6.88–€8.41 excl. taxPreliminary estimate for one variant

Downloads
173
Likes
25
Rating
5
P
PrintablesKtowns

I love MOM flower keychain

I love MOM keychain or necklace! To show your mom how much you love her on Mother's Day or any day!!! Made on my Prusa Mini with one color and on my Bambu X1C with two colors. Prusa Mini - purple and Bambu X1C -yellow with gray blue…

Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant

Downloads
158
Likes
10
Rating
0
P
Printablesfifindr

Flower of Life Coaster - Fine Lines

Enjoyed this model? Support me at buymeacoffee.com/fifindr to keep the designs coming! Add a new level of elegance to your space with the Flower of Life Coaster – Version 2 ! With a diameter of 100 mm and a height of 4 mm, this…

Print approx. €0.84–€1.03 excl. taxPreliminary estimate for one variant

Downloads
157
Likes
30
Rating
5
P
Printablesshkarlsson

AirTag Pet Collar Clip (Lowest Profile)

I believe it's more discrete than other designs because it doesn't have the “roof”, instead there is just an inner ridge on top keeping the tag in place while letting the silvery part of the tag be visible. Prints well with PETG and brim.…

Print approx. €0.30–€0.36 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
156
Likes
26
Rating
5
P
PrintablesPeter Farell

Girl Mouse in Flower Shaw

Girl Mouse in Flower Shaw

Print approx. €4.31–€5.27 excl. taxPreliminary estimate for one variant

Downloads
154
Likes
29
Rating
0
P
PrintablesMetikumi

Classic Curved Flower Pot with Wavy Decorative Lines in four Heights

This classic curved flower pot takes inspiration from the wide, elegant shapes of Roman vases, adding a unique twist with its wavy decorative lines. These lines artfully wrap around the vase, echoing its curves from the rim to the bottom.…

Print approx. €23.74–€29.01 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
152
Likes
60
Rating
5
P
Printableskuljaden

Halloween countdown cubes

I took the idea from the christmas cube countdown and modeled a scene for halloween. I am not a great modeler, but I had fun with this one so I wanted to share what I had.

Print approx. €1.48–€1.80 excl. taxPreliminary estimate for one variant

Downloads
146
Likes
77
Rating
5
P
PrintablesAsus1357

Toro snowblower key

Back up or replace ignition keys for snowblowers by MTD, Ariens, Certified, Husqvarna, Powersmart, Toro and Yardworks and possible others in North America. This is a remix of the key by Foden. Unfortunately it does not work on my Toro and…

Print approx. €2.12–€2.59 excl. taxPreliminary estimate for one variant

Downloads
144
Likes
9
Rating
0
P
PrintablesMetikumi

Kristina's Bird and Flower-Themed Side Panels for the Modular Lantern

These are Kristina's unique bird and flower-themed side panels for the modular lantern. I created various prints from her design: There are simple solid three-colour prints and variants where the leaves or the flowers create cut-outs.…

Print approx. €4.65–€5.69 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
141
Likes
52
Rating
0
P
PrintablesMrHanjak

Halloween Cute Ghosts - NO GLUE by-MrHan/24

⚫ Halloween Ghosts ⚫ I haven't released any Halloween decor in 2 years. So I decided to make more ghosts with more faces for you to choose from. And you can also change the color of the face. I hope you like the model! ➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖…

Print approx. €3.41–€4.17 excl. taxPreliminary estimate for one variant

Downloads
135
Likes
31
Rating
5
P
PrintablesWolvie

Self-watering Flower Pot / Vase Castle Tower

I remodeled a Self-watering Flower Pot / Vase Castle Tower for everyone, who need a cool Flower Pot or Vase :-) I took and remodeled one original model by Phat3R from Printables and made it into a functional Self-watering Flower Pot /…

Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant

Downloads
134
Likes
25
Rating
0
P
PrintablesMS_D3sign

Pumpkin Flower Vase – Halloween Decoration

This 3D model is a pumpkin-shaped flower vase, ideal for festive Halloween decoration or general decorative purposes. The design blends modern and festive styles, making it perfect for adding a unique touch to any space. No supports…

Print approx. €9.75–€11.91 excl. taxPreliminary estimate for one variant

Downloads
133
Likes
23
Rating
4
P
PrintablesAinon3Dtisk

Block, Brick, LEGO Flowerpot, Vase

Hello, Welcome to my profile, full of models and miniatures :-) I have Block, Brick, LEGO Flowerpot, Vase for you. It prints really well. You need to use supports! If you are interested in my work, the links are here:…

Print approx. €7.30–€8.92 excl. taxPreliminary estimate for one variant

Downloads
132
Likes
36
Rating
0
P
Printables8-ball 3D

6" Flower Pot (with drainage) + Nesting Saucer

*EDIT* The saucer didn't have enough air flow so the water runoff from the pot was growing mold. Modified the saucer to permit air flow. File name is: saucer_6in_v2 Got tired of not being able to find a basic 6" flower pot with drainage…

Print approx. €8.96–€10.96 excl. taxPreliminary estimate for one variant

Downloads
129
Likes
17
Rating
0
P
PrintablesMireCZek

FIVE-PETALLED FLOWER CUTTER / VYKRAJOVÁTKO PĚTI LISTÉ KVĚTINY

Five-leaf piston flower cutter that is used to cut out marzipan flowers for decorating, for example, cakes. / Pětilisté pístové vykrajovátko květiny které slouží k vykrajování marcipánových květin na zdobení například dortů. When…

Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant

Downloads
122
Likes
15
Rating
4
P
PrintablesMetikumi

Modern Quadratic Flower Pot in 192 Sizes

I designed this modern flower pot with a clean, timeless shape. The subtle 5º inward angle on the sides adds an elegant taper, making it more visually appealing than pots with straight walls. The top rim stays intentionally thin for a…

Print approx. €11.87–€14.50 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
120
Likes
36
Rating
0
P
PrintablesGTMan002

Snowblower Throttle Paddle

My throttle control lever handle broke off. After several years of just using the metal arm, I decided to draw up a replacement that could be 3d printed. If you need one of these, it is a quick and easy print. Might save you a few bucks…

Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant

Downloads
117
Likes
6
Rating
0
P
Printables3DMAC

ghost figure monster poltergeist hallowen

A simple ghost figure that can be printed without supports or placed only in places where mouths and eyes are used. Definitely a pleasure as a decoration for children in the room or on a hellowen holiday. Or as a toy for children.

Print approx. €4.36–€5.32 excl. taxPreliminary estimate for one variant

Downloads
114
Likes
24
Rating
0
P
PrintablesFaGrie

Helloween Latern (for LED or tea lights) Laterne

Helloween Laterne, gruselig schön. Auf der Innenseite wird Transparentpapier aufgeklebt und LED-Betterieleuchte oder ein Teelicht als Leuchtmittel eingebracht. Oben sind zwei Ösen für die Aufhängung am Laternenstab oder als Vorrichtung,…

Print approx. €18.00–€22.00 excl. taxPreliminary estimate for one variant

Downloads
114
Likes
22
Rating
4.5
P
PrintablesVentura

WATERLILY FLOWER

WATER LILY FLOWER, KVĚT LEKNÍNU

Print approx. €11.53–€14.09 excl. taxPreliminary estimate for one variant

Downloads
110
Likes
18
Rating
5
P
Printableshebel78

Flower pot

Get different forms by scaling the model. No supports required, print in Vase mode.

Print approx. €2.39–€2.92 excl. taxPreliminary estimate for one variant

Downloads
101
Likes
29
Rating
5
P
PrintablesBitScout

Balcony Handrail Flower Pot

Note: Header photo shows the provided version on the bottom left, a previous version (not published) is in the top right. Requirements You first need to make sure this pot fits your balcony handrail: Distance between bars: 105mm Size of…

Print approx. €0.68–€0.83 excl. taxPreliminary estimate for one variant

Downloads
100
Likes
78
Rating
0
P
PrintablesKilberisch

Flowerpot Reservoir and Drainage Insert

This model is an insert for flowerpots that lift your plant, ideal to create a water reservoir, improve the drainage of your used substrate or levelling your plant in an oversized pot. For smaller size variation feel free to use the…

Print approx. €0.89–€1.08 excl. taxPreliminary estimate for one variant

Downloads
97
Likes
17
Rating
0