Search results: luer

Sort order

180 models

P
Printableskaje

Compressed Air Gun - Luer Lock Adapter

I got this idea from a video by Stefan Gotteswinter : The basic idea is to be able to use blunt dispensing needles (see photos) with a standard compressed air gun in able to direct air into small openings. I took a slightly different…

Downloads
71
Likes
17
Rating
5
P
PrintablesQuesabyte

Wowstick Gluer - Gridfinity case

designed to use M3 20-22mm screws and heat inserts.

Downloads
34
Likes
8
Rating
5

ProPipette - luer splip syringes conversion kits

ProPipette conversion kits available The three models currently available are: Kit for 10ml luer slip syringe . 3D printable parts: - Universal spout printed in TPU (This spout works for all luer slip type syringes). - Printed TPU plug…

Downloads
34
Likes
25
Rating
0
P
Printablesvalasovaaa_

FLUERE CLOCK

Ready to use. Only a basic clock mechanism will be needed.

Downloads
4
Likes
5
Rating
0
P
Printableswavexx

Luer Lock M/F Cap

Double-ended Male/Female Luer Lock Cap. In the image the red parts are printed in FDM while the blue ones are the original injection-molded part. Fully 3D-printable in FDM in both orientations, no supports required. Optimized for a 0.4…

Downloads
2,310
Likes
79
Rating
5
P
PrintablesGolenes

Male Luer lock head

edit 24-03-2026: model thread pitch corrected.

Downloads
1,091
Likes
23
Rating
0
P
PrintablesJhonas

TwoTrees Bluer - Direct drive mod with Voron 0.1 design.

So, after many iterations and some bad behavior from my printers, I'm finally releasing this mod, or should i say costume? Basically, this is a custom front plate for my direct drive mod. As a Voron owner and a big fan of Voron printers…

Downloads
833
Likes
64
Rating
5

Parametric Luer Lock Dispenser Tips for Syringe (SCAD)

These use the lock portion from #3712257, allowing the tip length, diameter, and style to be customized. Included is a collection of simple round and flat tips, as well as a couple examples of angled and offset flat tips. STL files are…

Downloads
800
Likes
100
Rating
5
P
PrintablesJhonas

Voron Afterburner/ABBN30 for TwoTrees Bluer

-PT-BR Esse mod tem como objetivo trazer o Afterburner para a Bluer. O Afterburner "stock" é ideal para ABS porém deixa a desejar com PLA. Como a Bluer é muito usada para imprimir PLA, uma opção melhor seria utilizar um MOD chamado AB-BN…

Downloads
590
Likes
62
Rating
5
P
PrintablesWilliam Layton

Luer Lock Keychain Mod

I have printed a few with and with out support on the bambu X1 carbon on sport speed. Takes about 9 min

Downloads
582
Likes
40
Rating
0
P
Printablesdanandrei96

Luer-lock syringe cap for flux, solder paste, etc

Quick design to cap a Luer-lock syringe with needle still on. Works best if you resize it to fit your particular needle, as there are a few different sizes, so I've attached the solidworks file also. So far it's the best easy and cheap…

Downloads
532
Likes
91
Rating
4.8
P
PrintablesHRS10

Endotracheal Luer-Lock Connection

Connector piece for endotracheal tubes compatible with 2–5 mm tubes, featuring a Luer-lock port for capnography connection and a reduction in instrumental dead space.

Downloads
486
Likes
33
Rating
0

15/415 Luer Lock Bottle Cap

This cap will fit standard 15/415 threads and has a luer connection. Meant for SLS/SLA printing. There is a large flat overhang that is not the best for FDM. It cold be redesigned to be FDM friendly, but I was SLS/SLA printing these so I…

Downloads
425
Likes
17
Rating
5
P
PrintablesJhonas

Two Trees Bluer JB Direct Drive Mod

Hello, this is a project that i am working since my bowden coupler failed, i remembered why i hate bowden setups, actually i hate the couplers. So, i designed a direct drive mount that is compatible with my cooling solution to upgrade my…

Downloads
421
Likes
33
Rating
5
P
Printablesshafror

Luer Adapter

I needed a way to transfer solder flux between syringes. Using PLA+, printed at .1mm layer height, .4mm nozzle, and 80% infill. Printed on Snapmaker A350 and Dremel 3D45, both provided a tight fit, thanks to wavexx' design.

Downloads
314
Likes
26
Rating
3
P
PrintablesJack

Luer Lock Filter

Filter <200μm particle size - for Luer-Lock systems and syringes ( deactivate "fill gaps" )

Downloads
299
Likes
54
Rating
0
P
Printablesn.leinad

Luer Lock to R3/8 Adapter

This is a Luer lock to R3/8" thread (BSPT) adapter that is suitable for printing with an resin printer. For example, it lets you connect syringes to pneumatic fittings, as seen in the picture. Source code (.stp & .3dm) is also provided,…

Downloads
298
Likes
36
Rating
0
P
Printablesltanailov

Cosmofen luer-lock cap

This is a cap for COSMO CA superglue that allows you to use luer-lock (or luer-slip) needles for more precise glue distribution.

Downloads
296
Likes
43
Rating
5
P
PrintablesJoe Balough

e6000 to Luer Lock Syringe Adaptor

Never lose a drop of e6000 again! This thing adapts the e6000 nozzle to a luer lock so that you can load a glue syringe easily. To use: Screw the luer lock end on a syringe Jam the nozzle of e6000 in the other end Squeeze the e6000 tube…

Downloads
295
Likes
30
Rating
0
P
PrintablesMikyner

LM8UU / LM10UU Linear bearings lubricator aplicator for luer lock syringe

Lubricant applicator for LM8UU / LM10UU linear bearings. Luer Lock syringe interface https://eshop.cbmedical.cz/diconex-jednorazova-strikacka-3-dilna--10-ml-luer-lock--sterilni/ Can be printed without supports.

Downloads
278
Likes
47
Rating
5
P
PrintablesPiercet

3d printed frames for a Blue Robotics Bluerov 2

This project contains a set of 3d printable main side frames and lower frame for a BLue Robotics Bluerov 2 Remote underwater Vehicle https://www.bluerobotics.com/store/rov/bluerov2/ At the time I created these STL copies of the real frame…

Downloads
262
Likes
18
Rating
0
P
PrintablesFabTech

Luer Lock Syringe cap

.16lh on centauri carbon using PalA. Printed in 5min with 2 walls and 15% rectilinear infill. No support needed. Total material used, .93g

Downloads
244
Likes
19
Rating
0
P
PrintablesOpenLab MedTec

Training Ampoules and Vials (luer-lock)

About Printable ampoules with luer-lock fitting (ISO 80369-1) for training purposes. Different variants available, according to their real-world counter-parts: Ampoules 1ml 2ml 3ml 4ml 5ml 10ml 20ml Vails 2ml 5ml 10ml 25ml Printed with…

Downloads
235
Likes
26
Rating
0
P
PrintablesBlueShell3D

Nintendo 64 BlueRetro Bluetooth Receiver Mount

Mount a ESP-WROOM-32 on top of the heatsink of Nintendo 64 mainboards. Be sure to use PETG for flexibility and heat resistance.

Downloads
235
Likes
35
Rating
5
P
PrintablesChewsday123

Luer Lock gender benders

Male in, male out. Female in, female out connectors. Printed at a minimum resolution of 0.1mm on a resin printer

Downloads
232
Likes
30
Rating
4.5
P
PrintablesPencho

DIY Blueretro 5in1 [PS1, PS2, PS3, XBOX360] - guide on description

Blueretro case for minified ESP32. Will work with PS1, PS2, PS3 (via adapter), XBOX 360 (via adapter). Recommended material: PETG/ABS/ASA. Will work with PLA but could deform since ESP32 gets kinda hot. What is blueretro? BlueRetro is a…

Downloads
214
Likes
38
Rating
0
P
Printableschesamo

Luer lock connectors (straight, gender-switching, slip, and cap)

Luer locks are connectors designed primarily for medical purposes (but are used in other industries as well, such as chemistry labs). These adapters allow you to connect two same-gender locks, such as connecting two syringes together (FF)…

Downloads
208
Likes
19
Rating
5
P
PrintablesMaP7

Cable guide - Two Trees Bluer (V3) bed by map7 April 29, 2021

It's an accessory to avoid fatigue in the the Two Trees Bluer bed wire connection while moving back and forth. I printed out mine cable guide in PLA. Please feel free to modify and send feedback. Also, I would like to give credit to the…

Downloads
206
Likes
33
Rating
4.5
P
PrintablesArgyrean

Luer Lock Keychain Adapter

This is an adapter that screws into a standard luer lock syringe so you can hang syringes from a keychain or lanyard. You will need 10mm jump rings to attach these to a split ring or a carabiner. The Short Winged model can be used to…

Downloads
193
Likes
31
Rating
0
P
PrintablesNekurok

LM8UU / LM10UU Lubricator for Luer Lok Syringes

Lubricant applicator for LM8UU / LM10UU linear bearings (8 mm / 10 mm nominal inner diameter). Luer / Luer Lok interface for syringes at the back. can be printed without supports. 0.2 mm layer height recommended for best printing of the…

Downloads
188
Likes
32
Rating
5
P

TWO TREES BLUER - LEADSCREW STABILIZER AXIS Z BEARING 608

stabilizátor osy Z pro Two Trees Bluer Verze bez pomocí šroubů a na dvě ložiska, bohatě stačí použít jen jedno (608) Tisk PLA

Downloads
178
Likes
17
Rating
5
P
PrintablesScotten

BlueRetro Ps1 / Ps2 USB C

You will need the following items for this print: ESP32 30pin USB-C Dev board, these are common on places like aliexpress https://www.aliexpress.com/item/1005006336964908.html Ps2 Controller Male Connector, you will need to bend the legs…

Downloads
178
Likes
31
Rating
5
P
PrintablesLiam

RC Tire Gluer

Motor used - https://www.amazon.com/dp/B08HSFSNZQ - I went with 3 rpm for the motor, but feel free to use a faster one with similar dimensions. Personally, I like the speed of this one. Hardware used 4x M3 Flathead 8mm for the cover 2x M3…

Downloads
176
Likes
33
Rating
0
P
PrintablesSad Snifit

PS1 / PS2 BlueRetro receiver shell

This model is the smallest I could make it, and has been designed around Micha213's PCB (https://github.com/Micha213/BlueRetro-PS1-2-Receiver). What to order: 1 x PS2 plug from AliExpress 4 x 6mm M2 screws 4 x 2mm M2 heat set insert (3mm…

Downloads
174
Likes
25
Rating
0
P
Printablesgezatata

Luer Lok LM8UU Grease tip with screw cap

Print settings: Material: PLA. Resolution: 0,15mm Infill: 100% Perimeters: 2 Brim: no Support: no

Downloads
170
Likes
31
Rating
4.86
P
Printablesben.d

Luer Lok LMU8 Grease tip

Threaded Tip to adapt the Prusa lubricant LM8UU adaptor to a Luer-Lok syringe Print slow with good first layer squish.

Downloads
164
Likes
26
Rating
5
P
PrintablesVladimir

Blueray Holder

Holder for 10 blueray discs printing time: 16 hours with prusa i3 mk3s+ No supports needed can be mounted to wall or placed on shelf

Downloads
146
Likes
17
Rating
5
P
PrintablesFinn

Luer Adapter - Fixed Threads

I did this in a slicer because I was too lazy to boot into windows for fusion360… ENJOY :D Please note that this is a remix of the original in order to fix the issue of the mirrored thread, it has been marked as such with the correct…

Downloads
146
Likes
13
Rating
4
P
PrintablesLukas_Kvapil

Luer lock syringe adapter for LM8U & LM8UU greasing

First idea was to create a thread in adapter but this one is much simpler…

Downloads
141
Likes
13
Rating
0
P
Printablesbraga3dprint

Two Trees Bluer fan duct

Our 3D printed fan duct is a must-have for any Two Trees Bluer printer owner. We made it because the original was scraping on the print, causing issues with print quality. With this fan duct, you can improve the performance of your…

Downloads
136
Likes
9
Rating
0
P

Two Trees Bluer Direct Drive suport

Use stock motor, don't need to adjust firmware or steps Use 12mm screws Adjust retraction only Print with PETG or ABS 0.2 layer height

Downloads
135
Likes
9
Rating
4

Hickman PICC Line Luer Lock Play Set

this is an easy to print Hickman/PICC play set with working Luer Locks. great for stuffed animals or just demonstrating with. Includes single and double lumen lines, male and female Luer lock connectors, Luer lock caps and a luer lock…

Downloads
134
Likes
30
Rating
0
P
PrintablesRa

Two Trees Bluer Direct Drive

Use pancake nema 17 Category: 3D Printer Parts

Downloads
133
Likes
18
Rating
0
P
PrintablesJack

Luer Connect

Connect two syringes eg. move flux from a bigger into a smaller

Downloads
130
Likes
8
Rating
0
P
PrintablesAndrew Leigh

Luer lock Nozzle

This design provides a tapered nozzle to screw into a luer lock syringe. I designed it for use with casting silicone when making silicone socks for my 3D printer. The mould had a taper where the silicone is to be injected. I printed the…

Downloads
130
Likes
9
Rating
0
P
PrintablesBlue Robotics

BlueROV2 Fairing

This polycarbonate fairing can be used on the BlueROV2 to protect the Subsea Buoyancy Foam . *Please note: 3D print does not include the following: 4 x #4 – 3/4 screws

Downloads
126
Likes
4
Rating
0
P
Printableskripo

LM8UU lubricant applicator for Luer-System syringes

i only tested the fit in my syringe but didnt test the real application. I can't rule out that it won't work (could be too much pressure on the threads while pushing).

Downloads
125
Likes
13
Rating
4
P
PrintablesLloyd Welder

Luer Lock Keychain Adapter

An EMT I know was looking to have syringes handy to grab quickly, something color coded for easy identification. I preferred not to get into the debate about what is safe or not with 3D printed parts, or if they will leak, this keychain…

Downloads
122
Likes
23
Rating
5
P
PrintablesJack

Luer taper tips

dosing taper tip (1mm bottom for vase mode ↦ check layers‼)

Downloads
121
Likes
41
Rating
0
P
PrintablesSigismond0

BlueRetro Bluetooth Controller Adapter Case

BlueRetro is an open source project that allows you to use modern Bluetooth based controllers on retro consoles. Find out more at the Github and Hackaday sites. This case will hold a BlueRetro build using a ESP32 mounted on a 60x40mm…

Downloads
117
Likes
17
Rating
0
P
PrintablesHagelstone

BlueRay Book-Box

BlueRay Box in Bookstyle for 10 blue rays Print instructions multiple parts to glue it together.

Downloads
114
Likes
53
Rating
5
P
PrintablesSteveW91

Luer Cap

Male luer cap that can be as a plug. Category: Other

Downloads
109
Likes
14
Rating
5
P
PrintablesHokay

DVD/BlueRay/PS Games Rack

A rack with eleven slots for DVDs BlueRays or PS3 games. It should also work for other systems like PS4 games or X-Box but i cant test this. Size. 150x195x200 mm i print the rack with 10% infill V1. to stack you have to glue them

Downloads
108
Likes
19
Rating
0
P
PrintablesRobert ONeill

disk box, cd, dvd, blueray

I use blueray for my long term storage. I have a lot of disks that I wanted in the same box. these two parts can be printed without any support needed. To support the center post there is a hole intended to put a standard 3/8 dia dowel in…

Downloads
103
Likes
7
Rating
0
P
PrintablesAdam Coddington

Syringe Cap (Luer lock)

I store my solder mask goo in little syringes so I can apply it to boards without making a huge mess. These caps are designed to seal the container while not in use. Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 Plus…

Downloads
96
Likes
8
Rating
5
P
Printableskirk

Male Luer lock head with correct pitch

Changed thread pitch in FreeCAD from 2.5 mm to 5.0 mm for each helix so it matches conventional Luer Lock fittings.

Downloads
94
Likes
3
Rating
0
P
PrintablesJevipotter

RC Tire Gluer helper 1/10

RC Tire Gluer helper for 1/10 to 1/16 RC vehicles. Also for M-CHASSIS, includes the necessary adapters for these tires.

Downloads
92
Likes
17
Rating
0
P
Printablesnixxda

Smart Effector Luer Lock mount

This is a adapter to mount a solder paste needle (or similar) to your smartEffektor. The mounting thread is M12x1.5 The nut has +0.5mm Tolerance for 3D printing. The "Push in Connector" has an M5 thread but can be drilled out I'd say.…

Downloads
91
Likes
10
Rating
0
P
Printablesstonie422

Luer Slip Tip Parametric (Fusion)

This is a simple parametric Luer slip tip designed in Fusion 360. The tip diameter and length can be adjusted using the Fusion 360 (.f3d) file to fit different use cases. The Luer slip standard is very widely used, especially for syringes…

Downloads
89
Likes
26
Rating
5
P
PrintablesSteveW91

Syringe / Luer to StageTip addaptor

Syringe / Luer to StageTip addaptor Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.16 Infill: 25% Filament: Polymaker Polyflex TPU Black Category: Biology

Downloads
88
Likes
10
Rating
0
P
PrintablesPoppy-Blair

Two Trees bluer 3V2 direct drive extruder + cooling system + BL-Touch

Upgrade for BLuer printer from Two Trees The upgrade includes: - hotend holder - air pipes for cooling the nozzle - holders for 4020 fans - extruder and motor holder infill: cubic - 25% material: PET-G / ABS

Downloads
86
Likes
8
Rating
0
P
PrintablesBlue Robotics

GoPro Mount for BlueROV2

A mount for attaching a GoPro to a flat surface. On the BlueROV2 , the mount attaches to the front of the battery enclosure where it has the same view and lighting as the main camera.

Downloads
86
Likes
3
Rating
0
P
Printables86problems

dvd blueray case display

Print Settings Printer Brand: Creality Printer: ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 20% I created this in tinkercad to be printed with no supports. it is thin to save fillament but will work better if it was a bit…

Downloads
86
Likes
15
Rating
0
P
Printablessazhnikoff

E3D v6 for Two Trees Bluer

Easy print. Easy mount. STEP file inside. Enjoy! This modification uses stock fans and heater with thermistor. Two weld-in brass nuts are also required. Print Settings Printer: Flyingbear Aone Rafts: Doesn't Matter Supports: No…

Downloads
85
Likes
11
Rating
0
P
PrintablesCPSdrone

T200 & T500 BlueRobotics motor propeller guards

Upgrade to our underwater drone from our final video (link) on the mine exploration mission.

Downloads
81
Likes
8
Rating
0
P
Printables3D-Druck AG THG

Luer 2 Tube Connector

This adapter lets you connect any standard rubber tubing to a male Luer Lock fitting. It's ideal for transferring gases from pressurized gas cylinders into a Luer-based system. One end fits snugly into common lab tubing, the other locks…

Downloads
76
Likes
15
Rating
0
P
PrintablesTechnicaL

Two Trees Bluer Plus Airflow duct improved v2

Supports: Yes Infill: %100 Resolution: 0,20 Filament : Petg or Pla (petg more better) Print Settings Printer: Two trees bluer plus Rafts: Doesn't Matter Supports: Yes Resolution: 0,20 Infill: 100 Filament: Microzey PLA-PETG Doesn't Matter…

Downloads
76
Likes
6
Rating
0
P
Printablesmichal00ss

TwoTrees Bluer Simple and Rigid Direct Drive E3D V6

Description I designed very rigid and simplistic direct drive mount for my TwoTrees Bluer V2. I haven't found a solution that fits V6 hotend and have proper 5015 part-cooling fan. My main goal was to use a minimal number of external parts…

Downloads
76
Likes
12
Rating
0

Adjustable Z axis limit switch - Two Three Bluer

P.S: After printing I made a modification to the guides and the location where the switch wiring goes Português - A Bluer é uma excelente impressora 3D porém sempre é possível melhorar. Com esse ajuste do fim de curso do Z fica mais fácil…

Downloads
75
Likes
10
Rating
0
P
Printablesjohn3d

N64bt-dual DIY Case - Nintendo 64 BlueRetro Adapter

N64bt-dual DIY Case - BlueRetro 1x ESP-WROOM-32 module 1x programmer aliexpress.com/item/4000587174844.html 1x LED Button 12mm 3-6v aliexpress.com/item/1005002530474849.html 2x N64plugs aliexpress.com/item/1005004518984400.html optional:…

Downloads
70
Likes
35
Rating
5
P
PrintablesMyco Dogs

Luer Lock Cap Tool

A tool to help tighten those upgrade luer lock caps for spore/lc syringes

Downloads
69
Likes
11
Rating
0
P
PrintablesBlue Robotics

BlueROV2 Heavy Fairing Add-on

This polycarbonate add-on fairing is used on the BlueROV2 Heavy configuration to protect the added Subsea Buoyancy Foam and maintain a sleek, hydrodynamic design. Please note that this product doesn’t do much when used alone – it’s meant…

Downloads
66
Likes
4
Rating
0
P
PrintablesJason

Filter Box for Core One L using BlueRolls HEPA filter and fan

I didn't get the Prusa Advanced Filtration kit when ordering the Core One L - but as I have been printing quanties of ASA recently, subsequently got the BlueRolls fan and HEPA filter from Aliexpress . The jury is out as to how effective…

Downloads
63
Likes
20
Rating
5
P
PrintablesPiercet

Skeg fin for Deflecting Debris around a hull mounted Bluerobotics T100 or T200 Thruster

This is a 4.5mm thick flat skeg designed to sweep debris around a Blue robotics T100 or T200 thruster. it is made for use with a flat bottom hull. There is area on the bottom of the mount for caulking around the through bolts, though you…

Downloads
63
Likes
9
Rating
0
P
PrintablesBruno Porto

LMU Bearing Grease Packer Remix for Luer Lok Tip Syringe

Remix to use Luer Lok Tip Syringes for the grease injection and M3 hex type screws. The variants are for: LM8UU, LM10UU, LM10LUU, LM12UU and LM12LUU. Not all print tested yet. Updated to M3 screw and increased the syringe fit diameter…

Downloads
62
Likes
9
Rating
0
P
Printablesgwa

Cable Splices for BlueROV

To post process I put a piece of 400 grit sand paper on a sheet of glass and wet sand the mating faces until flat. Apply mold release. You can use vaseline thinned with a bit of mineral turpentine (mineral spirits) in a pinch.

Downloads
59
Likes
4
Rating
0
P
Printablestrailmixel

LuerLock Keychain

In an attempt to make them a little more airtight I dropped the layer height to .12mm instead of .20 and used supports. Printed for flight medicine. My Orcaslicer settings .12mm layer height .4mm nozzle -Wall loops 3 -Support - Tree,…

Downloads
56
Likes
11
Rating
0
P
PrintablesElsie Lewis

BlueROV2 Miniature

This is the 3D model of a BlueROV2, as used in the virtual double view in BlueOS, but with the wires removed, brackets thickened, and internal voids filled. The geometry is very rough since I made all the changes manually in PrusaSlicer,…

Downloads
52
Likes
3
Rating
0
P
PrintablesJhonas

BlueR v3 Filler spool holder Mount

Simple mount to Filler Spool holder using stock BlueR V3 Hardware. Print instructions Category: 3D Printer Parts Summary Simple mount to Filler Spool holder using stock BlueR V3 Hardware.

Downloads
52
Likes
4
Rating
0
P
PrintablesRazziaDK

Wowstick Gluer IKEA Skådis mount

I purchased a Wowstick Gluer - a hot stick glue gun that only supports 7mm hot glue sticks with a length at max 35mm. So I designed a small jig that can help cut cheap hot glue sticks to the correct length. Then I decided that I wanted to…

Downloads
52
Likes
8
Rating
5
P
PrintablesZechimaera

LM6UU grease tool for luer lock syringe

I needed a grease tool for my Ultimakers' LM6LUU bearings (the 35mm long version of the LM6UU). I enjoyed @gezatata_269121 's version of the LM8UU tool but could not directly shrink it as the greasing holes would be too small, so I made a…

Downloads
51
Likes
8
Rating
0
P
PrintablesBlue Robotics

BlueROV2 Heavy Thruster Guards

This HDPE thruster guard is used on the BlueROV2 Heavy configuration to protect the vertical thrusters and to prevent them from snagging on the tether, weeds, or ropes. *Please note: 3D print does not include the following: 8 x Heavy…

Downloads
50
Likes
4
Rating
0
P

PSX/ PS2 Blueretro mini adaptor case

You will need: 2x 12mm M2 screws 2x M2 nuts Male PS2 gamepad Connector ESP 32 Mini

Downloads
49
Likes
9
Rating
0
P
PrintablesAndrej

Spritze Syringe Injektion Luer-System

MX-creations DISCORD (German) Eine funktionale Spritze für z.B. Fett, Wärmeleitpaste, Lötpaste, usw. Sie ist dem Luer-System nachempfunden bzw. kompatibel, somit lassen sich Kanülen schnell und sicher befestigen oder lösen. -bitte mit…

Downloads
48
Likes
9
Rating
0
P
PrintablesJohn Barron II

2wd Buggy Tire Gluer

This compresses the sidewalls of your 2wd buggy tire to glue them to the wheel. This is meant to stiffen and shorten the sidewalls. It's primarily used is 2wd buggy offroad carpet racing. The file only contains one half of the device, but…

Downloads
47
Likes
5
Rating
0
P
PrintablesGezerTunes

StealthBurner for Two Trees Bluer Chimera

I shared just hotend related parts. If you want extruder/bowden, face and the other parts you can find on voron website and printables. You must use petg or abs. Don't use pla. Notes: If Your Bltouch probe is shorter than desired length.…

Downloads
46
Likes
7
Rating
0
P
Printablestola

Luer Lock Ventile für T-Stücke

2 Ventile für T-Stücke von Luer Lock - Zusammen mit einer Spritze kann eine Handpumpe erstellen. Zur Funktion müssen die Gewinde mit PTFE-Band abgedichtet und der Verschluss mit etwas Silicon-Armaturenfett versehen werden - dann kann man…

Downloads
44
Likes
2
Rating
0
P
PrintablesKolobushka

Direct Drive for Bluer Two Trees (Chimera single nozzle)

No Supports Print Settings Printer: Bluer Two Trees Rafts: Yes Supports: No Resolution: 0.2 Infill: 20 Filament: my3D PETG, ABS Black Category: 3D Printer Extruders

Downloads
43
Likes
9
Rating
0
P
Printablesburgersquid

BlueRov T-slot mount

This might be useful if you're building a smaller ROV based on BlueRobotics parts. The front side slides on to 2020 aluminum t-slot, while the other side connects to BlueRobotics' 4" enclosure clamp , using 4 M4 screws. As you can see in…

Downloads
42
Likes
1
Rating
0
P
Printablesbraga3dprint

Two Trees Bluer strain relief

The Two Trees Bluer strain relief model was created as a response to the potential danger of not having proper strain relief on the bed wires of 3D printers. After watching the Sovol SV06 Plus unboxing stream by Joe Telling, it became…

Downloads
42
Likes
12
Rating
5
P
PrintablesMademan57

Tête Bluer Two Trees + Direct Drive

Voici une tête de remplacement pour l'imprimante Bluer de Two Trees, elle vous permettra de remplacer les buses de ventilation, pour pouvoir améliorer le refroidissement du filament. Et vous pourrez passer votre imprimante en Direct…

Downloads
41
Likes
6
Rating
0
P
PrintablesKolobushka

DD for Bluer Two Trees (Chimera single nozzle)

DD for Two Trees Bluer Print Settings Printer: Bluer Two Trees Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: my3D PETG Category: 3D Printer Parts

Downloads
40
Likes
4
Rating
0
P
PrintablesFlueRian

FlueRian's Anycubic CAD Repository

Hello! This is a collection of my models for the Kobra S1 and the Ace Pro in .step format for you to use for remixes and modifications. 1: The vanilla fan cover 2: The fan duct closely modeled after the original 3: The Ace Pro insert for…

Downloads
39
Likes
5
Rating
0
P
PrintablesKolobushka

Blower for Bluer Two Trees (Chimera single nozzle)

Blowing under the long throat !!! Supports only under 2 item. The radiator mount is screwed onto the factory M3 screws, the coolers are also fastened to the factory screws, you need 4 M3 15mm screws to fix the parts with the fans Infill -…

Downloads
39
Likes
10
Rating
0
P
PrintablesTechnicaL

Bluer Plus Hotend Fan Holder

I made noctua fan upgrade you can find in my youtube link attached below. If you use another drawing linked below this is very week and thin https://www.thingiverse.com/thing:4693716 I made this drawing more thicker it make part more…

Downloads
38
Likes
2
Rating
0
P
PrintablesChewsday123

Right Angle LuerLock Gender bender

Print at 45 degrees with supports so the connectors are the last to print. Minimum 0.1mm layer height resin print.

Downloads
38
Likes
14
Rating
0
P

Cap for plastic luer-lock needle/dispenser tips

This model is a cap for plastic luer-lock needle tips. These tips are designed primarily to fit syringes, but you can also get fitting adapters for other purposes, such as superglue bottles - this is what I use them for. My tips came from…

Downloads
37
Likes
6
Rating
0
P
PrintablesSemiPolaron

MAD - Modular Air Duct for BIQU H2 base with mount for twotrees bluer

MAD - Modular Air Duct for BIQU H2 base with mount for twotrees bluer

Downloads
37
Likes
7
Rating
0
P
PrintablesChewsday123

Luer Lock collector

Print on resin printer with at least 0.1mm resolution. For use with 10mm id pipette Ideally clear resin, but other will work. Make sure to unclog the channels soon after the print has finished UPDATED: Air pressure relief hole reposition…

Downloads
37
Likes
12
Rating
0
P
Printablesgwa

BlueROV2 Sturdy Servo Mount

The injection molded model is prone to sagging when the enclosure gets hot. This one has more meat.

Downloads
35
Likes
5
Rating
0