Search results: mall

Sort order

11,495 models

P
PrintablesMikolas Zuza

Small Clip - for herb bags & other packaging

I use these mainly to close herb bags, but I've found they're handy for all sorts packs, like breakfast cereals, tea leaf bags, etc. The included 3MF has 10 of them. Just "right-click - Set number of instances" in PrusaSlicer to change…

Print approx. €0.11–€0.13 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
77,685
Likes
18,983
Rating
4.9
P
PrintablesAndreas G

Small Whistle: extremely loud

Small whistle for keychain, backpacks and other daily or safety equipment.

Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant

Downloads
15,523
Likes
2,803
Rating
4.91
P
PrintablesVC Design

Smallest Bag Clip

Tested in PLA

Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant

Downloads
7,782
Likes
1,523
Rating
4.9
P
PrintablesPastelka

Simple Small Filament Clip

Filament clip … small and simple The clip I used before was attached to the previous winding. This method did not suit me very well, because it was not quite easy to catch the previous winding in the right place so that the free end of…

Print approx. €0.16–€0.19 excl. taxPreliminary estimate for one variant

Downloads
4,378
Likes
1,108
Rating
4.82
P
PrintablesBeef_Salad84

Small fully-printable modular Vermicomposter

Hello I made this model to promote sustainability and to prove that you can live more ecologically even in a small flat or without fancy equipment. It's a Vermicomposter/normal-composter printable on a Prusa i3 with a maximum size in…

Print approx. €6.13–€7.49 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
4,051
Likes
1,756
Rating
4.76
P
Printablesprntmkr

Compact 90° Right-Angle Bit Holder – Ultra-small for tight spaces

Intro This is a very compact, low-profile 90 degrees right-angle bit holder for standard hex bits . It is designed to reach screws where a normal screwdriver or bit holder simply does not fit. The special designed variable bit fitting…

Print approx. €0.53–€0.65 excl. taxPreliminary estimate for one variant

Downloads
2,891
Likes
859
Rating
5
P
PrintablesEngiGear

Strong Small J-Hook

This J-Hook is a versatile solution for organizing your home, workshop, garage, or entryway . Whether you're hanging a jacket or a power cord, this hook does the job with style and strength. Perfect for: 🧥 Coats, jackets, and hats 🧰 Hand…

Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant

Downloads
2,530
Likes
1,289
Rating
4.95
P
PrintablesEmkatech (Mike)

Ruler Stop S – Precision Scale Stop for 0.5×15 mm Ruler | M3–M6 Versions (Small Version)

📝 Description The Ruler Stop S is a compact and precise stop designed for 0.5 × 15 mm rulers , ideal for workshop use, model making, and DIY applications. To make it максимально flexible, the model is available in four versions (M3, M4,…

Print approx. €0.42–€0.51 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
2,416
Likes
953
Rating
5
P
PrintablesPeter Farell

Stay Puff Marshmallow Man

Stay Puff Marshmallow Man.

Print approx. €16.51–€20.18 excl. taxPreliminary estimate for one variant

Downloads
2,068
Likes
379
Rating
5
P
PrintablesmoWerk

Small Trash Bag Dispenser / Holder for 35L rubbish bags / garbage bin liner

Trash bag dispenser Can hold a roll of 35L bags or any roll of bags with 6cm diameter and 15cm height/length 2 screw holes Easier to print bottom chamfer than on the original model Remixed from Augustas Kazlauskas fine Trash bag holder to…

Print approx. €3.45–€4.21 excl. taxPreliminary estimate for one variant

Downloads
2,032
Likes
425
Rating
5
P
PrintablesOWL ART

Borders for Honeycomb Storage Wall (Smallest Size, Prusa MINI)

Borders compatible with the Honeycomb storage wall base part of the smallest size. Only four models needed to complete! I printed it on MINI+ with 0,4mm nozzle and PLA. Print info Can be printed with 15% gyroid infill. Material: PLA…

Print approx. €0.63–€0.77 excl. taxPreliminary estimate for one variant

Downloads
1,902
Likes
595
Rating
5
P
PrintablesJN-Husch

Bird Feeder for small birds

This feeder is developed for small birds, and the staggered design prevents larger birds from landing on it. The bottom section, holding the bird food, is attached via a twist-lock mechanism to the lid, allowing for easy refilling. It…

Print approx. €5.49–€6.71 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,692
Likes
301
Rating
4.91
P
Printablestbrock47

Small Toolbox/Organizer

A small remixed version of @SaschaUncia 's Parts and Crafts Organizer Box that fits on smaller print beds like the Prusa Mini+. My son needed a box to keep his components for Arduino tinkering separated/organized and it seemed like an…

Print approx. €4.89–€5.97 excl. taxPreliminary estimate for one variant

Downloads
1,551
Likes
698
Rating
5
P
PrintablesCraftswoman.cz

34 Small Christmas cookie cutters / 34 Vánoční vykrajovátka / Ausstechformen für Weihnachten

🇬🇧 – English – A collection of 34 Christmas cookie cutters. Small ones, usually between 3.5 - 5 centimeters big. Collection includes: angel bell candle candy church comet cookie cross fish glove hat heart house moon mug ornament pig…

Print approx. €1.54–€1.88 excl. taxPreliminary estimate for one variant

Downloads
1,542
Likes
194
Rating
5
P
Printablessbuerger

Set of small funnels, spiral vase mode printable

I was looking for a funnel printable in spiral vase mode, yet among the 200+ models found on prusaprinters there was only one that was spiral vase suitable and unfortunately didn't fit my dimensional needs. So I made some models on my…

Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant

Downloads
1,155
Likes
76
Rating
5
P
PrintablesSHR3D.eu

Small truck - RM-70 Vampire 4D (printed in one piece)

[ENG] RM-70 Vampire 4D is the third modernization of the rocket launcher vz. 70 (or BM-21 Grad) realized by EXCALIBUR ARMY (previous are RM-70M1 and RM-70 Vampir). The rocket launcher with semi-automatic loading device is based on Tatra…

Print approx. €1.02–€1.25 excl. taxPreliminary estimate for one variant

Downloads
851
Likes
148
Rating
5
P
PrintablesThesBer

Small Heart Spiral vortex illusion fidget - New v2.1

💕 Small Valentine Heart – Elegance in Miniature! 💕 Imagine a heart made of two parts that twist elegantly into a spiral – yes, you simply twist it together! This creates a magical vortex effect, making this new small version an small…

Print approx. €0.64–€0.78 excl. taxPreliminary estimate for one variant

Downloads
754
Likes
106
Rating
5
P
Printablesnem

Small compact sliding desiccant box

A small desiccant Box with 1mm wide gaps and a sliding opening. 90 x 45 x 19.8mm (Base) 90 x 45 x 13.5mm (Short)

Print approx. €2.10–€2.57 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
714
Likes
213
Rating
5
P
PrintablesSHR3D.eu

Jiji - Kiki's Delivery Service (flexi cat - small)

The easy-to-print flexible cat Jiji from the Japanese cartoon Kiki's Delivery Service For a better final effect, it's a good idea to print it in two colours (black top and bottom and white centre to show the ears, nose and eyes), changing…

Print approx. €0.99–€1.21 excl. taxPreliminary estimate for one variant

Downloads
664
Likes
128
Rating
5
P
Printables3Dprintfun

Silica Gel Box For Smaller Beads

I had some silica gel lying around, and I wanted to make a container for it so that I could use it in my filament drier. I was searching for a good one, but they all seemed to have large holes that would only work with larger silica gel.…

Print approx. €0.81–€0.99 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
657
Likes
145
Rating
5
P
PrintablesCatdad Workshop

small succulent planter pot (vase mode)

This 4 inch planter (or flower pot, if you prefer) is designed to be a sturdy, modern, fast-printing planter for small plants and succulents. It also has built-in water drainage. It is designed to be easily printed with a standard 0.4mm…

Print approx. €4.45–€5.44 excl. taxPreliminary estimate for one variant

Downloads
586
Likes
110
Rating
4.88
P
PrintablesSarusani

Small Sanding Sticks

I couldn't find any sanding sticks small enough for my task. So here's my version. (6mm width) Required hardware per stick: 2 x M3 nut 2 x M3 10mm screw Print at 0.2mm with supports.

Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant

Downloads
570
Likes
120
Rating
5
P
PrintablesGeekMomProjects

Small Translucent Light Bulb

This print was designed just for fun, and to see how a 3D printed lightbulb would look. Turns out it looks pretty much like a regular light bulb! For best effect, print in two colors, solid (ideally gray or silver) for the first 10mm, and…

Print approx. €1.11–€1.35 excl. taxPreliminary estimate for one variant

Downloads
505
Likes
46
Rating
5
P
PrintablesTmpx64

Small House - torture test

If you’re tired of the eternal Benchy and want something different to display on your shelf, here’s a fresh alternative. It’s also a great way to test your printer’s capabilities, including overhangs, bridges, gaps, and stringing. If…

Print approx. €2.18–€2.66 excl. taxPreliminary estimate for one variant

Downloads
476
Likes
95
Rating
5
P
PrintablesMatt McGinnis

Smaller version of Spiral Vase Mode Sierpinski Pyramid

The original file takes 36 hours to print. This only takes 6 hrs. .1 layer height .6mm nozzle You can modify the .3mf file if you have a .4 nozzle.

Print approx. €4.05–€4.95 excl. taxPreliminary estimate for one variant

Downloads
453
Likes
39
Rating
4.67
P
PrintablesIan Smith

Small Plant Saucer

Small 90mm (3.5in) plant saucer. Works well with a variety of 3D printed and other small pots. No supports needed, print in PETG for better waterproofing. Example photos use Prusament PETG Terracotta Light.

Print approx. €1.24–€1.52 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
428
Likes
28
Rating
5
P
PrintablesStrandedOrg

Small Mitre / Miter Box (1 inch / 26mm)

Small mitre box with a 1 inch / 26 millimeter channel for 45 and 90 degree cuts.

Print approx. €4.58–€5.59 excl. taxPreliminary estimate for one variant

Downloads
384
Likes
38
Rating
5
P
Printablesedjsage

Small Shoe Mat/Drip Tray

This is a simple shoe mat/drip tray. Use it for whatever. I made this specifically for my son so he could have his own spot for his toddler shoes. https://ko-fi.com/edjsage

Print approx. €5.27–€6.45 excl. taxPreliminary estimate for one variant

Downloads
368
Likes
54
Rating
5
P
PrintablesPat_S

Small pillbox with bayonet lock / Kleine Pillendose mit Bajonettverschluss

Small, easy-to-open pill box with bayonet catch and various lids. Dimensions: Lid Diameter 44.00 mm Height 11.00 mm Box Diameter 40.00 mm (inner diameter 34.00 mm) Height 30.00 mm (height inside 28.00 mm) Total height 32.00 mm Print:…

Print approx. €1.97–€2.40 excl. taxPreliminary estimate for one variant

Downloads
366
Likes
24
Rating
5
P
PrintablesFabianVeile

Small Climbing Hold (Drawer Handle)

Hi! This is my small climbing hold. It is supposed to be a drawer handle, do not use it for real climbing!! Its dimensions are approx. 40 x 30 x 15 mm and it should fit screws with an M4 thread. How do you print it? The surface of it…

Print approx. €0.45–€0.54 excl. taxPreliminary estimate for one variant

Downloads
341
Likes
67
Rating
5
P
Printablesmicahbowerbank

Small Dessicant Box

I needed a dessicant box to fit inside my DIY drybox

Print approx. €3.74–€4.58 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
334
Likes
25
Rating
4
P
Printablesrbid

Seedlings/Small-Plant Support Rings (to be used with bamboo sticks)

I grow hot peppers, and when the seedlings go out from the propagator, they sometimes need some support, therefore this was the motivation to create ones. I can get for a cheap price bamboo sticks from various diameters (3.38mm, 4.00mm,…

Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant

Downloads
318
Likes
82
Rating
5
P
Printablesprintotter

PivotPrint - An outsidemounted hinge for small doors

Description An outside hinge for you to use. This is meant to be mounted on the outside of a cabinet. There is a left side hinge set and a right side hinge set. Print Instructions Since it needs to take some weight I suggest printing in…

Print approx. €1.08–€1.32 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
312
Likes
154
Rating
0
P
Printablesres

Planter Pot 1 with Drainage for Succulents and Other Small Plants (~4")

Update 1: I have designed a saucer for this pot. The pot can either be loosely placed in the saucer or you can put the corners of the base into the keyed edges of the saucer. When placed into the keyed edges, the footprint of the saucer…

Print approx. €1.57–€1.91 excl. taxPreliminary estimate for one variant

Downloads
289
Likes
58
Rating
5
P
Printablesneale

Small Parametric Temperature Tower

A Tiny Temperature Tower A small temperature tower you can tune to your liking, using OpenSCAD's customizer. I've included gcode for the Mk4 with input shaping. If you'd like me to provide a specific configuration of temperature range and…

Print approx. €0.26–€0.31 excl. taxPreliminary estimate for one variant

Downloads
287
Likes
18
Rating
5
P
PrintablesBount313

Triple vase for small succulents- vase mode

Printed on Prusa MK3 with prusament PLA. Can be scaled up or down in slicer. If you encounter artefacts in slicer, fix them by rotating the model 90°.

Print approx. €2.38–€2.91 excl. taxPreliminary estimate for one variant

Downloads
269
Likes
73
Rating
5
P
PrintablesH2A

Small table - Support PC screen / Sellette

Small Support Table used as PC screen stand Width 240mm High 172mm Depth 195mm Almost the full bed surface Print time : around 20 hours Print instructions Category: Household Summary Small Support Table used as PC screen stand Width 240mm…

Print approx. €22.08–€26.99 excl. taxPreliminary estimate for one variant

Downloads
257
Likes
12
Rating
0
P
PrintablesTrachtorBeam

Skadis Hook (Extra-Small Shelf)

Print in PETG using standard PETG printing parameters or some other tough plastic like ASA. I used Inland PETG and printed with Prusa's generic PETG parameters and infill 50%. Part is thin, so infill 15% will be fine. But, higher infill…

Print approx. €1.59–€1.94 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
236
Likes
26
Rating
5
P
PrintablesMLS

Small Spool Adapter for Sunlu S1 Filadryer / Adapter für kleine 250g Spulen im Sunlu S1 Filament-Trockner

Der Sunlu S1 ist nur für die 1kg Standard-Spulen vorgesehen. Um auch die kleinen 250g Spulen verwenden zu können, entwarf ich diesen Adapter. Nachdem die Spule auf den Adapter gebracht wurde, wird dieser nur zusammengesteckt und in die…

Print approx. €8.77–€10.72 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
235
Likes
45
Rating
5
P
Printablesfluetke

Small Cable Organizer for Power Supplies with Euro-Plug

Are you tired of the frustration that comes with tangled power supply cables? Look no further! This small cable organizer is the perfect solution to keep your power supply cables neatly organized and easily accessible. Designed…

Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant

Downloads
216
Likes
44
Rating
4.25
P
Printablesres

6 Inch Planter Pot with Drainage for Succulents and Other Small Plants

The STL has a solid bottom. I added drainage using a 109.37 x 109.37 x 2.4mm cylinder modifier in prusaslicer with 40% gyroid infill and 0 top or bottom layers. You could also use a simple cylinder modifier if you prefer a single hole for…

Print approx. €2.60–€3.17 excl. taxPreliminary estimate for one variant

Downloads
205
Likes
32
Rating
5
P
Printablesmstejska

Small basket 50x50mm

Small experimental basket. Diameter 50mm, Height 50mm

Print approx. €1.25–€1.53 excl. taxPreliminary estimate for one variant

Downloads
193
Likes
21
Rating
0
P
Printablesaceofspace

Drawer Organizer for small parts

My version of a small parts drawer. The top and bottom have a bevel to make stacking easier. At least for the tool boxes I use, stacking two trays and a lid fit in most drawers. The lid is optional depending on usage. Updated to add more…

Print approx. €4.26–€5.21 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
191
Likes
22
Rating
5
P
Printableskennyd1gital

Small Cat Food Can Lid

A scaled-down version of Piney29887's Cat Food Can Cover for the smaller 3oz cans of cat food. Keep that food fresh between meals! Add your cat's name to the lid with the new text tool in PrusaSlicer 2.6!

Print approx. €0.53–€0.64 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
191
Likes
21
Rating
5
P
Printables3D KIMBA

Precision Multimeter Tweezer – SMD & Small Component Testing Tool

Precision Multimeter Tweezer for SMD and small components Introduction Traditional multimeter probes can sometimes be inconvenient when measuring small components or testing printed circuit boards. To address this, I designed a pair of…

Print approx. €0.64–€0.78 excl. taxPreliminary estimate for one variant

Downloads
183
Likes
73
Rating
5
P
PrintablesPetan

Small stellated dodecahedron

Malý hvězdicový dvanáctistěn Kepler-Poinsot mnohostěn

Print approx. €1.03–€1.26 excl. taxPreliminary estimate for one variant

Downloads
182
Likes
18
Rating
0
P
PrintablesMavagoodtime

Vectra C & Saab 93 Recirculation Servo Unit Smaller White Cog

Replacement cog for Vectra C and some Saab 93 recirculation units where the small white cog has lost teeth. Where there is a clicking noise from the servo/motor unit one or both of the white cogs may have lost teeth. The larger one can be…

Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant

Downloads
172
Likes
19
Rating
0
P
PrintablesMadtom

kleine Schmetterlinge für Fliegengittertüre (small butterflies for a screen door)

Ein Schmetterling, um eine geschlossene Fliegengittertüre nicht mehr zu übersehen. Es werden 2 Schmetterlinge benötigt, einer auf jeder Seite der Türe 8 Magnete 6mm x 1mm (2 je Schmetterling) Mit ASA gedruckt, um UV beständig zu sein. A…

Print approx. €0.49–€0.59 excl. taxPreliminary estimate for one variant

Downloads
165
Likes
6
Rating
5
P
PrintablesAdam

Small Parts Cylinder Test Object

This small parts cylinder is designed with the dimensions specified in the Canada Toys Regulations, Schedule 1 (SOR/2011-17), a regulation adopted under the Canada Consumer Product Safety Act (S.C. 2010, c. 21). A toy that is likely to be…

Print approx. €1.57–€1.92 excl. taxPreliminary estimate for one variant

Downloads
165
Likes
8
Rating
5
P
Printablesbenedikt314159

Bin filler and dispenser for smaller parts, especially for WAGO clamps

Bin filler and part dispenser for Honeycomb storage system Functionality With this model you can fill up your storage bins easily and fast by just pressing the bins against the front lip of the slider. A spring will bring the slider back…

Print approx. €8.74–€10.68 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
147
Likes
128
Rating
0
P
PrintablesThe_5thDoctor

Armory Forged Shell For Small Ghost

This is a remix of the Armory Forged Shell Ghost addons by Toukejin . The parts have been resized to fit the smaller ghost model by BoldPrintShop. Gcode provided is for the Ender 3 line of printers.

Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant

Downloads
146
Likes
62
Rating
0
P
PrintablesHeikit

Modern tealight holder small and large - Moderner Teelicht Halter klein und gross

max 39mm / 59mm tealights Minimal filament consumption thanks to compact design Minimaler Filamentverbrauch durch kompaktes Design See also my egg cups in similar design Eierbecher in ähnlichem Design…

Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant

Downloads
142
Likes
22
Rating
5
P
Printablestom

Abklappbare Ablage (Regal)/ Small fold-down shelf

Um eine elektrische Luftpumpe im Kellerraum aufladen zu können, musste ein Regal in der Nähe der Steckdose her. Da diese Ablage meist keine Funktion hat, sollte sie möglichst wenig Platz einnehmen. Die Konstruktion kann deshalb flach an…

Print approx. €1.09–€1.33 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
139
Likes
14
Rating
3
P
PrintablesTurtulino

Rummikub Travel - 3 levels stand (small printers and travel box)

The three-tiered stand that comes with the Rummikub Travel was too small for me. So I created this model that allows for an extra row and also fits in the original box. It's compatible with the original Rummikub Travel stand legs. If you…

Print approx. €2.55–€3.11 excl. taxPreliminary estimate for one variant

Downloads
132
Likes
12
Rating
5
P
PrintablesLK74

Small watering can sprinkler nozzle - Embout pour petit arrosoir

Water your plants more evenly with this adapter/nozzle Arrosez vos plantes de manière plus homogène grace à cet embout d'arrosage Za pomocą tej dyszy podlewaj rośliny bardziej równomiernie

Print approx. €1.25–€1.53 excl. taxPreliminary estimate for one variant

Downloads
132
Likes
6
Rating
0
P
PrintablesMtechnic

Small Funnel for 50ml Spray Bottle

Clean your print bed often with IPA and need a helpful way to fill a 50ml spray bottle? This funnel is what you're looking for as it will fit that bottle opening perfectly. .m3f and .STL files included if you wish to scale to a different…

Print approx. €0.52–€0.64 excl. taxPreliminary estimate for one variant

Downloads
132
Likes
3
Rating
0
P
PrintablesNoWayCall

Small Microphone Pop Filter / Screen / Shield | (Shure SM58 style Mic.)

Here is a small pop filter for a Shure SM58 type microphone. --- It's probably not the best sounding one but it does the job, it's small, quick to print, easy to realise and in one piece. Update => The empty round version offers better…

Print approx. €0.90–€1.10 excl. taxPreliminary estimate for one variant

Downloads
130
Likes
25
Rating
0
P
Printablesgloda

Lid: Powerfix / Allit small parts organizer

Upgrade your small parts magazine! The Powerfix / Parkside Kleinteilemagazin 17 & 33 (sold by Lidl, FR: rangement pour matériel de bricolage) and Allit VarioPlus Hobby 17 & 33 (sold by Hornbach) come without lids. Take them anywhere! This…

Print approx. €5.88–€7.19 excl. taxPreliminary estimate for one variant

Downloads
125
Likes
33
Rating
5
P
PrintablesMakers Workshop

Small Parts Wash Container for ultra sonic cleaners

This is a small parts container for use in ultra sonic cleaners. I tested a friction fit lid design but the PLA plastic goes soft due to the heat in the ultrasonic cleaner and fails to remain closed. So now I have designed a container…

Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant

Downloads
117
Likes
27
Rating
5

Modular small parts drawers

EN: This is just another one of the many binders. However, this one is modular (one modul is 50x40x142 mm) and the printed parts do not need supports. Width = multiple of 50mm Height = multiple of 40 mm Depth = constant of 142 mm CZ: Toto…

Print approx. €0.08–€0.10 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
117
Likes
32
Rating
5
P
PrintablesMagda j

small Euro coin sorter

No more piles of small coins falling of the table. Sort 20, 10, 5, 2 and 1 cent coins into this Print. You can slide them out one by one at the bottom. Great if you for example use cents to count your points during a heated tabletop…

Print approx. €3.17–€3.87 excl. taxPreliminary estimate for one variant

Downloads
112
Likes
27
Rating
4
P
PrintablesFranziska

Vitamin effervescent tablet modular holder/stand. Very small print. Fits most brands.

My effervescent tablet tubes kept falling over on the shelf, so I just needed something simple to keep them standing up. I remixed an egg holder to fit the purpose, allowing me to add as many holders as I need in various configurations. I…

Print approx. €0.28–€0.35 excl. taxPreliminary estimate for one variant

Downloads
107
Likes
16
Rating
5

Nature's Miracle Small Animal Cage Scrubbing Wipes / Clorox Disenfecting Wipes, Wall or Cage Mount

Nature's Miracle Small Animal Cage Scrubbing Wipes 30 pack and Clorox Disinfecting Wipes 35 pack holder - for some reason, these two unrelated products have identical containers, I discovered by chance after printing. Has screw holes to…

Print approx. €6.27–€7.67 excl. taxPreliminary estimate for one variant

Downloads
95
Likes
27
Rating
0

small tools holder x-acto blades scalpel dentis tools

Small tools holder A holder for small tools: tweezers, dentist tools and x-acto utility scalpel with replaceable blades. Print it “standing” with 10% gyroid/grid infill and grid support from build plate only. The tool holder module…

Print approx. €4.80–€5.87 excl. taxPreliminary estimate for one variant

Downloads
94
Likes
6
Rating
0
P
PrintablesDanielR

Hyundai i30 small armrest

A smaller version of armrest organizer that perfectly fits the Hyundai i30 pre-facelift models (2017-2020)

Print approx. €4.05–€4.95 excl. taxPreliminary estimate for one variant

Downloads
94
Likes
13
Rating
0
P
PrintablesPaultier02

Small Jewelry Box

A compact, 3D-printable jewelry box designed to hold up to 18 items across two organized "floors." The upper and lower compartments provide separate storage for rings, earrings, or small accessories, keeping everything neatly arranged and…

Print approx. €1.10–€1.34 excl. taxPreliminary estimate for one variant

Downloads
93
Likes
17
Rating
5
P
Printableschrisebryan

Utility Knife Blade Snap Off Safety Bin - for 18 mm blades and smaller

This model was designed for my significant other who asked me for a cup to store her snap-offs. Parts For assembly you will need: printed parts For parts print the following: 1 x Utility_Knife_bin_lid.stl 1 x Utility_Knife_bin.stl…

Print approx. €1.45–€1.77 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
86
Likes
17
Rating
4
P
PrintablesBlue Hazel

Small Furniture Handle

Small furniture handle with print pause to insert M3 hex nut for fixation.

Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant

Downloads
86
Likes
20
Rating
5
P
PrintablesElias baut was

Feature-rich Small Square for School + Normal Parabola Stencil

A small square that fits in small pencil cases. With it, you can measure distances and angles, but also trace parallel and vertical lines. Bonus: Simple Normal Parabola Stencil Dimension square: 2,2*60*118mm Dimension Parabola:…

Print approx. €0.31–€0.37 excl. taxPreliminary estimate for one variant

Downloads
86
Likes
25
Rating
0

Smallest cup for ELFA pegboard

Easy 83mm small cup for Elfa pegboards. Required one pair of module clips https://www.prusaprinters.org/prints/60471 Based on remix of https://www.thingiverse.com/thing:2576053

Print approx. €1.83–€2.24 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
81
Likes
12
Rating
0
P
Printableseof

Print approx. €0.48–€0.59 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
81
Likes
7
Rating
0
P
PrintablesSpacekoaster

Wiha small screwdriver holder

Hello, Here's a remix from the Wiha small screwdriver holder from Colorfabb on Thingiverse (https://www.thingiverse.com/thing:1487220). The holder is made to hold 6 PicoFinish HEX screwdrivers from Wiha. The original design had two holes…

Print approx. €1.86–€2.28 excl. taxPreliminary estimate for one variant

Downloads
80
Likes
13
Rating
0
P
PrintablesEich

InfiRay P2 Pro Thermal Camera small case

This is a small case for the Infiray thermal camera P2. It can take the camera and the magnetic lense. The P2 Logo has been added by a prusa slicer function using a SVG file with this logo. The sliding top has been added as gcode file…

Print approx. €0.14–€0.17 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
80
Likes
6
Rating
0
P
PrintablescoffeeFueledDiy

Small OpenScad Bottle Openers

Various bottle openers created from the included OpenScad file. This is a great starting point to create an elaborate (or not so elaborate) bottle opener. The smallest of these samples are much tougher to use, but depending on how large…

Print approx. €0.26–€0.32 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
76
Likes
13
Rating
5
P
Printablesicefire

Original Samla Box Clip (Large and Small)

So today I had to find out that my favorite SAMLA boxes are still available, but IKEA didn't have the locking clips anymore. I found a lot of designs online, but I wanted to replicate the original geometry as well as possible. So I tried…

Print approx. €0.60–€0.74 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
76
Likes
14
Rating
5

Bambu Poop Chute - Smaller Footprint

This remix is from a request to be able to print the Poop chute on a Prusa MK3 printer.

Print approx. €24.91–€30.45 excl. taxPreliminary estimate for one variant

Downloads
74
Likes
1
Rating
0
P
Printablesmstejska

Small collapsible cup

44mm diameter and 44 height

Print approx. €0.70–€0.85 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
72
Likes
6
Rating
0
P
Printables3DCatt

halloween pumpkin earrings thinner and smaller

the g-code has the proper height of layer for the manual color change

Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant

Downloads
72
Likes
14
Rating
5

Small Diresta Catapult

See Diresta's youtube video for how he created the original. Use string for the spring and a pin for the trigger.

Print approx. €7.95–€9.71 excl. taxPreliminary estimate for one variant

Downloads
67
Likes
16
Rating
5
P
PrintablesThesBer

Android Big movable Eye – Now small Keychain :-)

Meet the Android 🤖" Big movable Eye "👁, the bot with a seriously movable eye. This isn't your standard, friendly green robot. This is a dual-sided companion that’s always got an eye (one very large eye) on the prize. Realistic eye look:…

Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant

Downloads
66
Likes
18
Rating
0
P
PrintablesDevise3D

Small Paper Clip

This paper clip is a reliable tool for keeping your documents, notes, or files organized. Lightweight and easy to use, it securely holds multiple sheets of paper together for everyday tasks. Beyond traditional uses, it can also serve as a…

Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant

Downloads
65
Likes
7
Rating
5
P
PrintablesKnoxyboy

Simple small shelf

I wanted a place to put my 1L isopropyl alcohol bottle and microfiber cloth, so I made this simple shelf. Holes are for 3.5mm countersunk screws. Inner dimensions (mm): LxW - 104x89 Outer dimensions (mm): LxWxH - 110x95x60

Print approx. €3.03–€3.70 excl. taxPreliminary estimate for one variant

Downloads
65
Likes
6
Rating
0
P
Printablesmindfulmakerlab

Small Part Bin Replacement Drawer (Aero-Mils 10116, 16 Drawer Organizer)

I disliked the factory drawers that came with the Akro-Mils 10116 organizer, but I liked the shell, so I decided to make my own drawers that fit my needs. Can fit up to 50mm M3 screws. Printing Instructions: PLA 15% infill I will continue…

Print approx. €7.53–€9.20 excl. taxPreliminary estimate for one variant

Downloads
63
Likes
7
Rating
0
P
PrintablesBurt0n

Cup with Lid for Small Items VW Polo

Cup with Lid for Small Items – fits VW Polo AW (from 2017) The VW Polo doesn't offer much storage space, so I designed this simple insert for the cup holders. It's perfect for keeping coins, small change, keys, or other small items…

Print approx. €4.21–€5.14 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
62
Likes
5
Rating
5
P
PrintablesAdam

Infinity Puzzle (Montessori style) Add-On (Double-Small Piece)

This is a new piece for my Infinity Puzzle , but you can use it all by itself too! This is the puzzle where the pieces are all the same shape and can be put together infinite ways. Print the pieces in different colours and let your…

Print approx. €0.16–€0.20 excl. taxPreliminary estimate for one variant

Downloads
62
Likes
24
Rating
5
P

Fidgit - Magnetic 34 x 60 Smaller Hex

This fidget is smaller than my similar larger fidget. This one fits more easily in your pocket. Carry several in your pocket and pass them to friends or anyone you meet. It compresses with your finger or thumb and returns to the extended…

Print approx. €0.92–€1.12 excl. taxPreliminary estimate for one variant

Downloads
56
Likes
3
Rating
0
P
Printables3DM-DeMeern

Small bowl Ø95x51mm

This is a small bowl to keep small parts or use for sorting parts, printed without supports. This bowl feels like a general bought bowl this is because there is only a small part which has a infill most is solid PLA. We use it in the…

Print approx. €2.83–€3.46 excl. taxPreliminary estimate for one variant

Downloads
55
Likes
4
Rating
0
P
Printablesbayoyunbaz

Heart-Shaped Gift Box – Perfect for Small Surprises

Ideal for small jewellery such as rings and earrings Conquer your lover's heart :) Material PLA or PETG Infill : No Layer Height : 0.2

Print approx. €0.94–€1.15 excl. taxPreliminary estimate for one variant

Downloads
52
Likes
3
Rating
0
P
Printablesgrejvl

Cold Shoe to SmallRig 1/4" Adapter

This is a cold shoe to SmallRig 1/4" adapter , designed to let you securely attach any cold shoe accessory (like microphones, lights, or monitors) to your SmallRig rig or other equipment with a 1/4” screw mount. The design is compact,…

Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant

Downloads
51
Likes
4
Rating
0
P
Printables3DFW

Smaller Sealed Syringe Disposal Box - Print in Place - No Supports

Fits on MINI beds. Internal support design for a safe and strong place to dispose of your used needles. One-way door. Clear, raised labeling helps prevent accidents. Don't push too hard or you will bend the door. Just slip the capped…

Print approx. €10.79–€13.19 excl. taxPreliminary estimate for one variant

Downloads
51
Likes
11
Rating
5
P
PrintablesAxol

Lil gnome model (a little small upscale if wanted)

little gnome with hat, pants, nose, beard and eyes

Print approx. €0.55–€0.68 excl. taxPreliminary estimate for one variant

Downloads
50
Likes
8
Rating
0
P
PrintablesLudo B

Kleine vuilniszakken of ander plasticzakken opbergers. Small garbage bags or other plastic bags for storage.

Om kleine plasticzakken op te bergen in of op de kast. Om te kleven, vijzen of ophangen. Voor het ophang systeem heb ik de tussen latjes gekleefd. Voor die latjes heb ik er een Fusion 360 bestanden bij gedaan. To store small plastic bags…

Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant

Downloads
50
Likes
13
Rating
0
P
Printablesgillis

Screw-together container for small items

Print with default settings layerheight 0.2 15% infill Inner height of the container is 25 mm and the diameter is 80 mm For a single/top container you should print a lid For the following container(s) you should print a connector All…

Print approx. €0.43–€0.52 excl. taxPreliminary estimate for one variant

Downloads
49
Likes
15
Rating
0
P
Printablesmicrotherion

Small Trashcan for Hygiene Bags

A small trashcan, tailored to be lined with a type of blue hygiene bags commonly found here. Hooks on both sides to secure the (rather long) handles of these bags. The inclined counterpart to the hook helps a bit to secure against the…

Print approx. €7.70–€9.41 excl. taxPreliminary estimate for one variant

Downloads
49
Likes
1
Rating
0
P
PrintablesChevdor

Winder for Kite lines / strings (small)

This winder is a small one for thin and short lines. I use it for my Prism 3D indoor kite.

Print approx. €0.47–€0.57 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
46
Likes
2
Rating
5
P
PrintablesJeyMco

Small dog step stool

Printed at 0.6mm layer height in PLA in 3 different colours. Using the automated filament switch options in the prusa slicer. Small enough for the prusa mini print bed (18x18cm). It is fairly narrow. If you want a wider one for your…

Print approx. €8.92–€10.90 excl. taxPreliminary estimate for one variant

Downloads
45
Likes
4
Rating
0
P
PrintablesLuluX

Simple box for small files

The box is for a set of small files. Dimensions of files: total length ~170mm handle length ~48mm shaft 5mm Printer settings: Layer height 0.2mm Perimeters: 3 Infill: 15% Supports: No I printed the box with PETG using modified "Prusa MK4…

Print approx. €2.26–€2.76 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
44
Likes
10
Rating
5
P
PrintablesJeyMco

Grout float (jointing / voegen / Fugen) for small areas (and hands)

Two grout floats in 2 different sizes: small (7 x 15.6cm) with handle smaller (7 x 10cm) with crim grip Don't forget to (hot glue 130C) add a foam float (I got mine from the hardware store), I recommend at least 5mm larger foam as the…

Print approx. €1.22–€1.49 excl. taxPreliminary estimate for one variant

Downloads
43
Likes
5
Rating
5
P
Printablesbaschtler

Small Machinist Square

Since i needed 16 Pieces of a machinist Square for a school Woodworking Project it was way cheaper to print them. Size inner angle: 40mm x 60mm / 1.5748in x 2.3622in Printed on a Core One in PLA+ (from RBD) My Settings: 0.20mm STRUCTURAL,…

Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant

Downloads
42
Likes
1
Rating
0
P
PrintablesFJ

Drying Rack (Wäscheständer) Fix (Small)

This model is a remix of https://www.printables.com/model/250269-drying-rack-wire-repair It is a bit shorter and thinne

Print approx. €0.32–€0.39 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
42
Likes
5
Rating
2