716 models
BIG news on 11.07.2026: WordClock 16X16 received its biggest update yet. I fully rewrote the configuration portal and added lots of new features and improvements to the software. To name a few of them please read this list and have a look…
Print approx. €0.88–€1.08 excl. taxPreliminary estimate for one variant
BIG news on 18.07.2026: Software version V5.0.0 available! WordClock 16x8 received its biggest update yet. I fully rewrote the configuration portal and added lots of new features and improvements to the software. To name a few of them…
Print approx. €5.05–€6.17 excl. taxPreliminary estimate for one variant
A simple geometrical design inspired by the amazing Matrix movies! Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print)…
Print approx. €4.07–€4.98 excl. taxPreliminary estimate for one variant
BIG news on 18.07.2026: Software version V5.0.0 available! WordClock 16x8 received its biggest update yet. I fully rewrote the configuration portal and added lots of new features and improvements to the software. To name a few of them…
Print approx. €6.06–€7.41 excl. taxPreliminary estimate for one variant
A parametric LED Matrix diffusor front plate. fullcontrolXYZ based, 100%extrusion, 0 travel, 0 retractions. Extrudes at 0.8mm, which is totally fine for a 0.4nozzle. A bigger nozzle will probably allow much faster print speeds. Prints as…
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant
I printed at 0.2mm. The bottom when printed, which becomes the top, is done with two layers at 45 degrees. I used generic white PLA, but anything that is slightly transparent should do. More of my builds at makies.au
Print approx. €1.25–€1.53 excl. taxPreliminary estimate for one variant
Simple 64x64 matrix holder with integrated open case for an ESP32 with some holes for wiring, cable ties and 3 wall hanger holes for nails or screws. Printing instructions: 0.3 draft profile No brim or supports used Steel Sheet used Happy…
Print approx. €2.63–€3.22 excl. taxPreliminary estimate for one variant
Here is my design for an inside corners bracket to secure 2 or more HUB 75 Matrix panels together. My panels came from Adafruit - they are from Waveshare I believe - Mine are 64x64 but they probably work on the 32 x 64 as well. I used 2…
Print approx. €3.11–€3.81 excl. taxPreliminary estimate for PETGSource material: PET
The idea is to separate each pixel into it's own "box" this in combination with a diffuser sheet or transparent paper, gives a nice “boxed” effect for each of the 4096 led's. Beware you are not going to print the object, you are going to…
Print approx. €4.04–€4.93 excl. taxPreliminary estimate for one variant
This contains only the German version of the Word Clock but with a closed front, but it's adaptable for other languages if you take a look how I stacked the different colours. I used a darker bronze gold (from Redline Filament) for the…
Print approx. €4.21–€5.15 excl. taxPreliminary estimate for one variant
This is my mod of @WLCD_471142 s AWTRIX enclosure. Big shout out for his awesome work: https://www.printables.com/model/863847-awtrix-enclosure AWTRIX is an fun ESP8266 based IOT clock with lots of features: https://docs.awtrix.com/ It…
Print approx. €1.42–€1.73 excl. taxPreliminary estimate for one variant
Adeept Joystick Module Case This custom 3D-printed case is designed for the Adeept joystick module, providing protection while maintaining full functionality. It securely houses the module, preventing damage while allowing easy access to…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for PETGSource material: PET
ESP32 Matrixuhr nach S-huehn.de
Print approx. €10.02–€12.25 excl. taxPreliminary estimate for one variant
How to use Validation Matrix (Tyler Schubert) https://youtu.be/GL-9Ia0SibQ The Validation Matrix must be printed with 4 or less base exposures for a correct test result. ------------------------------------------------------ The…
This is a Calibration Matrix for the Prusa Mini to calibrate the first layer. It consists of 15x15mm squares that are 0.2mm tall. The Squares are layed out into a 4x4 Matrix and are printed sequentially starting form the front on the…
8x32 LED Matrix Frame No glue*, tape or screws needed Accessible USB port Wall- or desk-mounted Snap-fit sockets for ESP-WROOM-32, MAX4466 or MAX9814 microphone and DC Power Connector for easy installation Optional socket-less version * I…
This model pressure fits together with little tiny square pegs. If you want to avoid using glue, your extrusion multiplier needs to be tuned just right. Assembly is simple! But might make some instructions soon :)
This is an old video I made as a quick showcase some time ago and will be replaced with another better one soon: IMPORTANT NOTE Even this LED cube is much much easier to assemble than my previous “ Geodesic(k) RGB LED Spheres ” , it still…
If you're looking for an easy-to-print case and diffuser for your WS2812B 32x8 LED matrix panel, you're in luck. The case and diffuser have been designed to be printable on a common-sized print bed, and are split into separate parts for…
The .3mf file is already set up correctly to test your printer's flow. You must enable brim to hold the pieces together (10 lines should be enouth) and preferably set line width to 0.4mm . You should obtain at least one box with the…
I combined my passion for arduino projects and professional design skills to create an impressive dot matrix display/clock for my workspace. The project involved 3D printing, ARDUINO/ESP32 and addressable LED strip. I'll walk you through…
This is my version of the Autobot Matrix of Leadership, from the 1986 animated movie. I've found several good versions to print online, but they all print in a single color. This model is split into individual components so that each…
This is a modified version of this Pixel It case . It was created with the excellent Pixel It project in mind. The case has mounting points and an access port for the D1 mini, a cable path to make free-standing use easier, and optional…
You need Arduino Nano Example link 8x8 Matrix Example link 6x m3 Thread Inserts, outer diameter 4,2 mm. (if you want to use 5mm threads, there as a alternative Glas Part 6x m3x12 Lens Head Screws White Filament for the “Glas” Dark…
16x16 LED Matrix Frame No glue, tape or screws needed Accessible USB port Wall- or desk-mounted Snap-fit sockets for ESP-WROOM-32, MAX4466 or MAX9814 microphone and DC Power Connector for easy installation Optional socket-less version…
The ironing process (and its results) depend of three variables: flow rate ( FR ), spacing between ironing passes ( SBIP ) and printing speed ( PS ). The matrix shape allows to check two setting combinations at once; whilst we have three…
BIG news on 18.07.2026: Software version V5.0.0 available! WordClock 16x8 received its biggest update yet. I fully rewrote the configuration portal and added lots of new features and improvements to the software. To name a few of them…
For printers like the Saturn 4 Ultra that support resin calibration by printing multiple exposures in the same print, it is difficult after print to distinguish between the exposures. To avoid removing and cleaning them one by one, this…
The Exposure Calibration Test Stop wasting time marking your test prints with pens that wash away in IPA! This is a functional remix of the XP2 Validation Matrix by Photonsters Key Improvements in this Remix Embossed Numbering (1-8): Each…
16x16 LED Matric case Features: Fits standard 16x16 LED matrix Rear hidden power barrel jack Internal supports for panel Lots of space for dev board to drive the LED matrix Its designed to house a ESP32 or ESP8266 running something like…
MAZE RUNNER inspired LED 16x16 matrix clock with 256 NeoPixel LEDs Features: 16x16 matrix clock that you cannot read directly without knowing where you have to look. Some people i showed it had a really hard time to see it and some gave…
This project is a three part LED flag light case with different mounting options. V2 supports a 5V DC power supply (5VPS files) and up to a 5mm thick acrylic plate (V1 up to 3mm). Pictures were taken from the left side of the V1 dual…
This model houses a WS2812 8x32 LED matrix, an ESP32 and the necessary cables. I'm using it as a status display for my PV inverter, the ESP runs Pixelix to display the contents. Most printers are too small to print the three parts in one…
I gifted my son an Airsoft gun for Christmas. He wants to start playing with his friends in a league. One Stipulation I had is he needed to keep it up out of easy reach of smaller kids (plus he must keep it without batteries installed and…
16x32 LED Matrix Frame No glue*, tape or screws needed Accessible USB port Wall- or desk-mounted Snap-fit sockets for ESP-WROOM-32, MAX4466 or MAX9814 microphone and DC Power Connector Optional socket-less version * I suggest gluing the…
Case for multible ESP3266 dot matrix projekts. There are many projekts online, just search the web for ESP8266 and MAX7219 or dotmatrix. The drawer in the lid fits to the WeMos D1 Mini ESP8266 module. Close the lid with two M2.5 bolts…
UPDATE: I also have done a 32x32 Matrix in a IKEA picture frame with WLED: https://www.printables.com/de/model/501107-led-rgb-matrix-ws2812b-esp32-wled-32x32-round-squa…
32x32 LED Matrix Frame No glue*, tape or screws needed Accessible USB port Wall- or desk-mounted Snap-fit sockets for ESP-WROOM-32, MAX4466 or MAX9814 microphone and DC Power Connector for easy installation Optional socket-less version *…
The FilamATrix toolhead is great, but the Dragon HF mount just let too much air blow across the heat block of the TZ V6. I remixed the geometry of the Stealthburner mount from Citywrecker and combined it with the Dragon HF duct from…
Update 27Dec2022-All files have been updated; more Detail for both spring and elastic versions. Spring version clearances updated. Both require one 7/8" 4-40 screw or similar. Spring release requires one 3/8" 4-40 screw. Update…
This is a two-part housing for a cheap 64x32 LED matrix, including mounting for a Raspberry Pi 3A+ BOM 1x 192x96mm LED panel like this one . Unfortunately, this listing makes no guarantee of screw hole locations, however I've ordered…
A NeoPixel / WS2812b controlled LED Matrix with 16x16 Pixels Easy to print: Can be printed without support, Filament Type doesn't really matter. I printed mine with PETG, but PLA or something else should work fine as well! I printed the…
Hello Makers, i wanted a bigger LED matrix with 32x32 LEDs. So i looked for a nice picture frame that fits also for the depth. I found a good & cheap one on IKEA. On Youtube there are lots of tutorials to build a 32x32 matrix out of four…
I found a great tutorial for electronics that was missing only the case. So I started modeling. Many thanks to Crazymakers for their work and sharing. Link to the video : Link to the website :…
Coronal brain matrices for 40-75g mouse brains 2024.04.19 - Added a version with increased slot sizes Print instructions PLA, 0.25 mm nozzle, 0.1 mm layer height --- If you'd like to support my work https://www.buymeacoffee.com/bitn
Build a square LED display with the 8x8 NeoMatrix and Feather M4 Express! Learn Guide https://learn.adafruit.com/sqaure-neopixel-display-with-black-led-acrylic/ YouTube video Code on GitHub…
I purchased some Solmore RGB Cabinet Lights (Model NO.:S-CL-003) and remixed the insides of the original matrix ( https://www.thingiverse.com/thing:326614 ) to fit. Tolerances are tight so glue may not be needed. NOTE: You must have an IR…
This is stand for my Matrix of Leadership model. The base is hollowed out to reduce the amount of filament required to print. You can add supports if you want, but it really shouldn't need them. Any bridging issues wouldn't be visible at…
64x64 LED Matrix Grid If you're printing yourself don't use this model!: This is is a really really slow path to printing these since slicers aren't optimized for grids like this. A better option is: Create a 192x192x6mm solid box (or…
Español: Por aquí les dejo el cover de la lampara que diseñamos en el evento en vivo en youtube en el canal de Mi Tutor Digital. Fue diseñada completamente en Fusion 360. Diseñado para una IKEA SEKOND. Mostrándola con una lampara edison…
This model can be used to build a LED matrix cube. It uses WLED as firmware and a WLED controller. The panels are glued with double sided tape to the "adapter". The cube has 5 sides with LEDs and a solid base. The image is from the…
Print it laying down. put the leds in the slots and wire it up. diffuse it from the front side
I'm making a project that uses these 8x8 RGB LED matricies and I needed a reference model. I couldn't find one so I knocked this one up in OpenScad. Seeing as I couldn't find one here, I figured I'd upload it so anyone can use it as a…
Very simple, wire these LEDS; https://www.aliexpress.com/item/4001296811800.html?spm=a2g0o.order_list.order_list_main.89.21ef1802Wp91AO Along with an ESP32 to a 5v PSU, glue the panels together and you're done :)
A mount for the Orbiter 2.0 extruder for the FilamAtrix toolhead cutter (note the A in mAtrix) recommended for the BoxTurtle MMU from Armored Turtle. I remixed the Stealthburner Orbiter 2 mod and the model for the Orbiter Smart Sensor for…
What it does: Prints 9 tiles, each with a different bed and different nozzle temperature. I basically vary these two temperature settings: Note: PrusaSlicer v2.6.0-alpha6 or higher is required! Not tested on Orca or Bambu slicers I was…
There's way too much information to decode the Matrix. You get used to it, though. Your brain does the translating. I don't even see the code. All I see is blonde, brunette, redhead. This is a simple gadget inspired by the popular movie…
Get ready for the premiere of The Matrix Resurrection.
I want to have a led matrix to show information of my weather station. I first looked at the design from fractalnoise but one 8x32 matrix does not offer enough space. So I decide to make my own design. To have more space i make the design…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Simple box for the MAX7219 LED Matrix. This project is under test but has not been tested yet. Print it, Share it and Like it ! PS: Help me get a Prusa MK3 by clicking like and downloading the model
remake of another model. Added features. Dimensions 170mm x 170mm x 5mm (L x W x H) excluding dovetail counter-sunk m3 holes parts clearance (0.8mm) Features parts clearance dove tail for connecting the four pieces small inlet for the PCB…
Build a beautiful 3d printed hourglass physics toy using LED matrix and Feather Sense. Use CircuitPython to simulate particle collision code on a small microcontroller packed with tons of sensors. With Built-in lipo charging over USB,…
Add a stock to your MatrixFire by removing the orange sling point. Update 27Dec2022: Split files for printing in two pieces. Gives an uglier print, but is MUCH stronger than the single piece. Requires 3x 7/8" 4-40 screws to attach.…
These battery holders are designed so that they can be used with locknuts in the inset holes or they can be used with the screws going through the battery mount with the heads being in the insets. In either case, the mounting hardware…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
The layout of the letters was inspired by https://github.com/brettoliver/wordclock but the underlying code and construction is different. I have made a few versions of this over the past few years and I though I should release it as I've…
This is a stand for the Adafruit LED panels. The one I bought is this one: https://www.adafruit.com/product/2276 ...and I used a Pi with this HAT: https://www.adafruit.com/product/2345 There are a ton of HUB75-compatible displays out…
Printed with Prusament PETG Jet Black 0.3mm support is required on the front piece. Based on the design of DIY Machines youtube: https://www.youtube.com/watch?v=QWaVYCVoqbc Items required: Wemos d1 mini:…
This is a simple Desk Clock made from five 8x8 LED matrices and an Arduino Nano / Pro Mini This clock uses a DS3231 RTC IC, which is not only quite accurate, but does also provide a temperature reading (which isn't as accurate but good…
RGB matrix case Diffuser (print in place with color change) Case stand Back frame to fit esp32 dev boards, mini bread boards, etc Printing Instructions Please use white filament for diffuser. The case & stand can be printed from any color…
This is my design for a minimalistic and clean 16 x 16 led matrix display with sound reactivity. It is designed to stand or to be hanged to a wall. BOM: printed parts 16x16 WS2812B RGB Digital LED Panel Flexible e.g.…
Second model published, but the first one i actually started to work on. Diffuser + box for a 16x16 pixel grid (available from BTF lighting). for the diffuser, first three layers are white PLA, then switched to black pla for the remainder…
Modified the 32x32 P3 version to make it 64x32, as printing 2 32x32 parts didn't work for me Print Settings Printer: Artillery Genius Rafts: No Supports: No Resolution: 0.2 Infill: doesn't matter Filament: Any PLA Black Category:…
A cabinet enclosure for 64x64 LED matrix (3mm pitch) with Adafruit controller. The enclosure is suitable for wall mounting. PLA-ST & organic support.
I wanted to build a nightbed lamp for my kid, but all the previous neoboard-related designs seemed designed to be hang on a wall more than to be used by a 5 year old... so I built a new frame with a wider bottom side. Instructions for the…
I want to make some mods for the Matrix drill body and I figured having a model of the basic drill body would be a good start to creating some custom attachments in addition to the matrix attachments that already exist. Let me know in the…
Let's world build for a second. Say, for example, you bought a specific wireless charger for your phone that can mount to your car. Lets say, hypothetically, it's this one . When it finally arrives, you then realize that the only two…
The Apollo Automation M-1 LED Matrix is a vibrant, high-performance display featuring 4096 pixels in a HUB75 format. Powered entirely by our new 5V (USB-C or WAGO) controller, it requires no additional power sources, keeping your setup…
Since I switched to a flexible electricity tariff ( Tibber in my case) at home, I was looking for a way to indicate the current price level as well as the trend for the next few hours in an easy way. After some search, I found a project…
A small remix of Large Gear Clockwork2 HGX that allows you to use SB2209 RP2040. Also available in Meowburner version. There may be minor errors in the model. SB2209 CAN (stm version) not compatible Based on user feedback, support for the…
SimHub provides many useful & cool features including a gear indicator. This is a great project for anyone getting started with SimHub and/or 3DPrinting. If you are building the bullet version make sure you insert the matrix before adding…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This case was designed to fit an 8x32 LED matrix and a microcontroller in the back. There are two different case thicknesses to give you a little extra space for the hidden microcontroller. The case is designed to be a tight fit for the…
Happy 38th Anniversary to Transformers The Movie! Here's a Matrix of Leadership keychain so you can light your darkest hour from the convenience of your pocket. Happy printing & til all are one!
This is a remix of: https://www.thingiverse.com/thing:2867294 because the LED matrix didn't fit in size. Attached is the f3d file for fusion360 as it was completly redrawn. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No…
A cover that can be hung on the wall or placed on a table. Inside is a board that holds the ESP8266. The board needs to be slightly sanded on the side so that it sits there. The back cover is held by 4 M3 screws and there are wall mounts.…
LED diffuser Matrix 8х8 WS2812 Simple printing from the table upside down. Nozzle 0.5 layer height 0.2
This allows the fitting of a Servo to the stealthburner with filamatrix filament cutter to automate the cutting, it's designed to mount to the original cable bridge holes and the cable bridge included is that of the EBB Stealthburner…
Small enclosure for the 4x4 Matrix Keypad. The case is 78 mm wide and 77 mm long. The total height of the case is 21.5 mm where the bottom is 20 mm. Hole for wires at the bottom, being 10 x 20 mm. Lid is snap fit, so you it can be a bit…
This is a simple light diffusing cover designed to fit Waveshare's “ESP32-S3-Matrix” board. I designed and printed it with "Eryone" brand white PLA, but I imagine any slightly-translucent filament would work. Clear filament would probably…
Basic enclosure for a 4 panel MAX7219 LED display including 4 “feet” for attaching with zip ties, wire, etc. I am using clear packing tape to protect the display and keep it within the housing.
Remixed this from AWSW great model https://www.printables.com/de/model/450556-wordclock-16x16-led-matrix-2023-v3 - here you can also get his neat Arduino Software to operate. I only remixed DE+EN Fronts so far, other languages would take…
This is a case for two 4 x MAX7219 LED Matrix modules and a wemos d1 mini. You might break a few clips when inserting the LED modules, but there are enough, so it should not matter :) Print Settings Printer Brand: Creality Printer: Ender…
Lost the cup holder dividers and didn't want to pay an arm and a leg to get new ones. The front divider is adjustable, like the original. (Just not as pretty. ;) ) In the picture, the sizes weren't quite right. The stl's should fit. Feel…
I have no idea what this table of contents thing is, Printables autogenerated it and I can't get rid of it, so please ignore it. 7/3/24 I am sorry to report that due to recent fraudulent activity I have removed the matrix files until the…
A Diffusor for 8x8 RGB LED Matrix To be printed with two colors - Layers 0-3 with white PLA/PETG and the remaining parts using any other color you like. For best “pixels” a black frame is recommended. You can also print the entire piece…
2.5mm pitch RGB LED matrix panel model. This model is useful for designing your own mounting brackets for multi-panel displays. 64x32 2.5mm pitch RGB matrix panel purchased from Adafruit. Used with a Matrix Portal S3 microcontroller for…
