Search results: mb

Sort order

38,686 models

P
PrintablesRyan Millar

Honeycomb Display Shelf (No Supports Required)

Two versions of the a display shelf that have customizable “grills” (or support walls). Notes: If printing this on a Prusa MK3S+, then the .stl files MUST BE SCALED to 85%. The grills were designed to snap in place without the need of…

Downloads
33,788
Likes
17,593
Rating
4.94
P
PrintablesHD_Creator

Miniature Vise 2.0 (much easier to assemble and 100% printable)

History of the miniature vice This is the completely reworked version 2.0 of my very popular miniature vise, which is much easier to assemble now. Around Christmas 2020, I had published the first version of my miniature vise here:…

Print approx. €4.29–€5.25 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
24,102
Likes
4,212
Rating
4.85
P
PrintablesRyan Millar

Display Shelf Wall Assembly (No Supports Needed)

These two models can be combined to make as large or as small as a display area as you need. Both being based on the same hexagon base, they fit together perfectly. Print as many as you like and display all of your awesome prints and/or…

Downloads
10,551
Likes
4,380
Rating
4.95
P
Printablesaiwebb

Multicolor articulated axolotl w/ articulated limbs

Articulated limbs Multicolor support Added coloring on the nostrils and mouth, giving it a bit of a smile

Downloads
9,337
Likes
1,321
Rating
5
P
Printablesleperos

Combs for Philips OneBlade

Combs are in the original "click" system. Randomly tested sizes: 1mm, 2.5mm, 4mm, 5.5mm, 7mm, and 8mm – each one fit my razor. I don't recommend printing multiple at once. Print one first and check if it fits. Printed on a problematic…

Print approx. €2.62–€3.20 excl. taxPreliminary estimate for one variant

Downloads
7,131
Likes
1,807
Rating
4.78
P
PrintablesR3D

Combined First Layer + Adhesion Test

The Ultimate First Layer and Adhesion Calibration I designed this model to test several calibration and adhesion aspects like for example: Nozzle Offset Adhesion Roundness Small-feature performance Also it gives you an indication for…

Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant

Downloads
5,123
Likes
119
Rating
5
P
PrintablesŠkoda

Škoda Octavia Combi

Who wouldn’t want to own a car as legendary as the Škoda Octavia? Its appeal is reflected in the more than 7 million units it has sold, and the fourth generation is no exception. Its success is built on a clean, timeless design,…

Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant

Downloads
3,846
Likes
656
Rating
5

Honey Comb Screwdriver Holder Screw Mount Remix

I wanted to use the original model , by herbert , on my electronics bench, but it does not have a pegboard, so I remixed it to mount with screws or double-sided tape. This model matches the Pegboard Screwdriver Holder (7mm honeycomb and…

Print approx. €3.52–€4.30 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
3,461
Likes
552
Rating
4.73
P
PrintablesModularManiac

Modular Honeycomb Desk Organiser

This is an easy to print, cheap, and if I may say so, attractive way to ensure that you never again have to burrow through piles of PLA offcuts to get to a pen or pencil. With 3 different sizes of module available, you can create a desk…

Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant

Downloads
3,241
Likes
841
Rating
4.89
P
Printablesthebrew.shop

Bombastic Butterfly

This beauty is a bit tricky to print. I've included a prusa .3mf that should have slicer settings. The multi-color is done with filament changes. PETG and PLA both worked well, just ensure your bed is clean and sticky, and your stringing…

Print approx. €2.23–€2.73 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
2,597
Likes
682
Rating
4.91

Playstation 5 Joystick/Thumbstick Extender (No Supports!) (PS5)

This print is useful to increase aiming accuracy for people in certain games. I personally needed that in Call of Duty Modern Warfare 2 Multiplayer mode. When you play without an extender, you can easily realize that sensitive aiming is…

Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant

Downloads
2,386
Likes
136
Rating
4.7
P
PrintablesZach

Old Tombstone Variations - D&D Scatter

A set of several old stone gravestones featuring runes/engravings, damage, and various carved patterns. I love these as scatter because they're a great mix of detail, built-in weathering, and print-and-forget. You can print a whole bunch…

Print approx. €1.99–€2.44 excl. taxPreliminary estimate for one variant

Downloads
2,318
Likes
700
Rating
4.88
P
PrintablesFlyship

русский алфавит и цифры, Russian alphabet and numbers

Русские буквы и цифры для обучения чтению и знакомству с русским алфавитом. Файлы для печати под сопло 0.4мм, материал PLA. Наборы по 4 символа. Высота символов 30мм, толщина 5мм.

Print approx. €0.41–€0.50 excl. taxPreliminary estimate for one variant

Downloads
2,147
Likes
76
Rating
0
P
PrintablesShadowcat

Spool weight for Bambulab AMS spools

Simply print with the Bambulab default settings 0.2 in PLA. For coils 55 mm x 64 mm and 50 mm x 64 mm Printing time approx. 1h49m Use 6 x used AA batteries The screwing revised . Added empty containers to fill with e.g. plaster.

Print approx. €4.59–€5.60 excl. taxPreliminary estimate for one variant

Downloads
2,066
Likes
274
Rating
4.83
P
PrintablesBodo

Honeycomb Wall Compliant Mechanism Clip Mount - cable, pen, etc HSW

Changelog Honeycomb Wall Compliant Mechanism Clip Mount 2023-01-08 v1.2 Horizontal variant added 2022-12-11 v1.1 changed geometry and printing orientation for easy support removal and more reliable fit 2022-12-09 v1.0 initial public…

Print approx. €0.30–€0.37 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
2,038
Likes
746
Rating
4.7
P
PrintablesChunkadust

Bath Bomb Mold

A basic bath bomb mold design. I'm posting multiple sizes because if you scale it past 80%-120% you will find the tolerances are no good, also the labels on the bottom help identify them when you're like me and have too many molds around!…

Print approx. €1.46–€1.79 excl. taxPreliminary estimate for one variant

Downloads
1,998
Likes
240
Rating
4.92
P
PrintablesBodo

quick Paracord rope clamp 4mm & thimble

Precision ingenieur'ed paracord lock that does not require additional parts and prints easy and reliably. Will fit 4mm diameter paracords and is very compact in size. Obviously not suitable for safety relevant applications. Assembly…

Print approx. €0.13–€0.16 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,781
Likes
523
Rating
4.95
P

Honeycomb wall organizer (not compatible with the original)

This project is inspired by “Honeycomb storage wall” project by RostaP, but NOT COMPATIBLE with it. My honeycomb plate has different dimensions and its walls are thicker and more solid. This project is not finished. New components can…

Print approx. €0.60–€0.73 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,657
Likes
344
Rating
4.25
P
PrintablesPrinter4496

Birthday Cake Topper: all Numbers from 0-9

Birthday Cake Toppers - all numbers Here you can download all digits form 0-9 as cake toppers for birthday cakes or other anniversaries. They look best if printed in two colors, e.g. with a white outline. How to Print Just scale to the…

Print approx. €0.71–€0.87 excl. taxPreliminary estimate for one variant

Downloads
1,630
Likes
196
Rating
5
P
Printablesdevdrik

Honeycomb Ikea Skadis pegboard plier/scissor/anything holder, hex all the way and no supports

This Ikea Skadis pegaboard accessory comes in beautiful honeycomb pattern and can hold many things, like pliers, scissors, caliper, cables and probably many more. I got inspired by the remixed model and made a new version that is hex all…

Print approx. €0.65–€0.79 excl. taxPreliminary estimate for one variant

Downloads
1,474
Likes
329
Rating
4.79
P
Printablesvaxxi

Modular trellis system for climbing plants

I liked the idea behind this model , but wanted a more sturdy construction that did not involve glue (am not a patient man). So, with a bit of Fusion 360 work, here's this nice trellis that can grow as needed. No glue required, but pieces…

Print approx. €1.04–€1.27 excl. taxPreliminary estimate for one variant

Downloads
1,462
Likes
387
Rating
5
P
PrintablesNicG

Beer/Soda Can Travel Gimbal

I was super impressed with mobiobi 's Universal Travel Coffee Gimbal but, being a man who enjoys beverages with more of a sparkle to them I deemed it necessary to have a Universal Travel Beer/Soda Can Gimbal that I could attach to my Golf…

Downloads
1,380
Likes
328
Rating
5
P
PrintablesSknown

iPad stand honeycomb design.

This is a simple iPad stand. The original design is by @whoisjako . The original work is wonderful design, but the hook is too small and unstable for my old iPad, so I modeled a new one. The original design is at this URL.…

Print approx. €1.86–€2.27 excl. taxPreliminary estimate for one variant

Downloads
1,262
Likes
82
Rating
4.78
P
PrintablesTerence

MMU2S Idler Tension Screw Retainer & Thumbscrew

A solution to eliminate the hide and seek game every time the MMU2S door is flipped. No disassembly or extra components required, reuse existing tension screws and springs, I printed the bases separately in a darker colour and I can…

Downloads
1,219
Likes
228
Rating
4.74
P
PrintablesJohn

Robin Logo Emblem Badge Symbol

This is the Robin logo. Best to print in two colors. This logo is perfect for any Robin costume. Be the amazing boy wonder, incredibly-talented and acrobatic sidekick to Batman, also known as Dick Grayson (or other versions, including Tim…

Print approx. €2.01–€2.46 excl. taxPreliminary estimate for one variant

Downloads
902
Likes
99
Rating
5
P
Printablesaith53

Replacement Beard Comb for some Philips Hair Clipper Beard Trimmer HC BT models peine barba

Replacement adjustable beard comb for some Philips HC and BT models. Recambio peine ajustable para barba compatible con algunos modelos Philips HC y BT.

Print approx. €1.52–€1.86 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
854
Likes
71
Rating
4.25
P
PrintablesPrinter4496

Birthday Cake Topper Numbers from 0-9

Birthday Cake Toppers - all numbers Here you can download all digits form 0-9 as cake toppers for birthday cakes or other anniversaries. They look best if printed in two colors, e.g. with a white outline. How to Print Just scale to the…

Print approx. €0.92–€1.13 excl. taxPreliminary estimate for one variant

Downloads
843
Likes
63
Rating
5
P
PrintablesA3B

Prusa MMU2S thumbscrews for idler tensioning

This is a remix of the MMU2 thumbscrews for the MMU2 S . The longer thumbscrew should avoid accidentially pushing buttons on the MMU2S. If you already printed the short/original, you just have to replace the left thumbscrew, because there…

Downloads
841
Likes
129
Rating
4.97
P
PrintablesLandoRi

Pre-2024 Chaos Space Marine Combat Patrol Carrying Board

For all Warhammer 40k players who want to carry around their CSM Combat Patrol! This is a small board that holds all 10 Chaos Space Marines, 5 Havocs, the Dark Apostle and Disciples, and Hellbrute. At worst you may have to print it at…

Print approx. €10.42–€12.73 excl. taxPreliminary estimate for one variant

Downloads
691
Likes
67
Rating
0
P
PrintablesHugo

Robust climbing Stick Clip that screws on painter/squeegee extensible pole

I liked the idea behind this design , but it was too flimsy, even printed on PETG it kept breaking when dropped on the floor. This is designed for the Black Diamond “HotForge” carabiner from their quick-draws, but should fit any of the…

Print approx. €2.62–€3.21 excl. taxPreliminary estimate for one variant

Downloads
689
Likes
71
Rating
5
P
Printablesmariazuelo

Embudo

Embudo ideal para la cocina o el taller, con su agujero para poder colgarlo detrás de la puerta. Impreso en PLA

Print approx. €3.34–€4.08 excl. taxPreliminary estimate for one variant

Downloads
689
Likes
14
Rating
5
P
PrintablesReferentiel

E-Nable - Phoenix Unlimbited Hand Prothesis

Join the E-Nable association and offer a 3D printed hand to children! Rejoignez l'association E-Nable et offrez une main imprimée 3D aux enfants! https://e-nable.fr/…

Print approx. €4.95–€6.06 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
660
Likes
141
Rating
5
P
PrintablesSunbertyv

Thumbstick Grip ps4 / ps5

SCALE THE STL TO 98%, trust me This simple grip for your controller is simple and long-lasting, it takes a few minutes to make, it is a great ally if your thumbsticks are damaged or very old Print: Basic PLA 0.2mm resolution (lower for…

Print approx. €0.16–€0.20 excl. taxPreliminary estimate for one variant

Downloads
654
Likes
45
Rating
0
P
PrintablesAntro

XBOX controller Thumbstick

Thumbstick replacement Probably will work with other XBOX pads too I recommend to: use 0.25mm nozzle (to better reproduce the texture) or print with resin Update: additional champfered version requested by @ntnt

Print approx. €0.62–€0.75 excl. taxPreliminary estimate for one variant

Downloads
629
Likes
124
Rating
5
P
PrintablesNASAworm

Butterfly Knife Balisong- CyberPunk Arasaka Remix Comb Version

CyberPunk Balisong (Comb) Arasaka logo + full printable hardware/ Perfect trainer knife

Print approx. €1.25–€1.53 excl. taxPreliminary estimate for one variant

Downloads
616
Likes
63
Rating
5
P
PrintablesAWSW

BIG birthday numbers

BIG birthday numbers to be placed on a table. Height = 175mm Depth = 55mm Printing instructions: Fuzzy skin activated for “all walls” in Prusa Slicer 0.3 draft profile Textured sheet used No brim No supports No ironing of the upper parts…

Print approx. €3.72–€4.54 excl. taxPreliminary estimate for one variant

Downloads
543
Likes
56
Rating
5
P
PrintablesFC2M3D

Boneca Ambalabu (Request)

Request for some friends Sugestion for printing Infill: 15% Layer Height: 0.20mm Supports: Yes, organic - Support on the build plate only Seam: Rear Brim: Yes If you like my work consider Buy me a coffee 😊

Print approx. €3.68–€4.50 excl. taxPreliminary estimate for one variant

Downloads
527
Likes
36
Rating
4
P
PrintablesNew1

Gerber Armbar Drive pocket clip updated

Print as shown on the screenshot, without supports. I've used 0.4 line width, 0.2 layer height, PETG filament. The part should fit very tigth inside the holes, use some force. No screws or glue needed. It doesn't make one-hand operation…

Print approx. €0.15–€0.18 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
514
Likes
44
Rating
5
P
PrintablesFernando Pena

Pax 2/3/Mini Vape Charger-Case Combo + Storage

This is a remix of the pax storage case from thingiverse by maker giek2000 . I modified this case to include an insert for the pax charger, so the device can be charged while being stored, combining all accessories in one single neat…

Print approx. €1.33–€1.62 excl. taxPreliminary estimate for one variant

Downloads
484
Likes
61
Rating
4.83
P
Printablesadesir

Embout rail de guidage Festool

Embout à insérer au bout du rail de guidage Festool FS pour éviter l'accrochage du fil ou du tuyau d'aspiration. Pour cette fonction, il peut remplacer le déflecteur FS-AW. Mais cet embout ne guide pas les tuyaux, il évite juste qu'il…

Print approx. €1.67–€2.04 excl. taxPreliminary estimate for one variant

Downloads
456
Likes
94
Rating
4.5
P
PrintablesAsphalt3D

Magnetic Alphabet and Numbers

Add a fun and educational touch to your kitchen with a set of 3D-printed magnetic alphabet fridge magnets! Ergonomically rounded corners allow for easy, comfortable pick-up and manipulation. Each letter and number is modelled with a void…

Print approx. €1.11–€1.35 excl. taxPreliminary estimate for one variant

Downloads
432
Likes
76
Rating
5

Comb Forge - Beeswax foundation machine

Update 2026/08/20 : V2 rollers available The V2 rollers are now available with an improved cell geometry. Thank you Kahera for your advice ! If you already printed the original version, you only need to print the new rollers…

Print approx. €2.92–€3.56 excl. taxPreliminary estimate for one variant

Downloads
431
Likes
258
Rating
5
P
PrintablesVenture_3D

Honeycomb Wall mounted ink holder for tattoo ink

60 bottle holder, work in progress Spins on wall Base needs to be printed at 100 infil or drilled through and metal bolt used honeycomb design with inserts for different bottle sizes held together by inserts requires two skateboard…

Print approx. €1.95–€2.39 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
429
Likes
87
Rating
5
P
PrintablesMonty

Toy Tombstone (BattleBots)

My kids are huge fans of BattleBots and inspired me to create a set of toys that they can be a bit rough with without fear of breaking the more expensive Hexbug toys. All “pins” are sections of 1.75 standard filament snipped to length.…

Print approx. €3.67–€4.48 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
418
Likes
45
Rating
4.67
P
PrintablesFC2M3D

Steamboat Willie's Mickey Mouse Keychain

Easy to make a Steamboat Willie's Mickey Mouse keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊

Print approx. €0.29–€0.36 excl. taxPreliminary estimate for one variant

Downloads
400
Likes
71
Rating
5
P
PrintablesRockatilly

loading ramps Bruder MB Arocs Construction truck

ramps fit really good without removing the platform gate and are proven working by my 4year old nephew :-) print twice (mirror one to get both, left and right ramp) originally designed in Catia V5. Unfortunately CATPart files are not…

Print approx. €3.92–€4.79 excl. taxPreliminary estimate for one variant

Downloads
392
Likes
37
Rating
5

Moss pole / climbing aid (modular)

You can stack up multiple modules on top of the ground anchor and optionally add moss inside the modules for plants which need the moisture. I recommend to print in PETG. The module should be printed with the detents up or with brim…

Print approx. €1.13–€1.38 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
373
Likes
80
Rating
4
P
PrintablesSJM

Kfz Kennzeichen Sample (German-EU) license number plate Einzeilig

Deutsches Beispiel EU-Kennzeichen Lang und Einzeilig. More of my license number plates: https://www.printables.com/model/1200241-kfz-kennzeichen-sample-german-eu-number-plate-einz…

Print approx. €1.70–€2.08 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
369
Likes
16
Rating
5
P
Printableshrrossi

Print approx. €0.34–€0.42 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
357
Likes
148
Rating
5

Hexa wall mount for honeycomb wall from @allthingsstl

I like the honeycomb wall from the guy im remixing but it's missing parts, so here are the missing parts, enjoy

Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant

Downloads
354
Likes
31
Rating
0
P
PrintablesAlgernon

Airbrush stencil ST-SF004-digital-numbers-paint-hobby-stencil

Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.

Print approx. €1.33–€1.63 excl. taxPreliminary estimate for one variant

Downloads
350
Likes
101
Rating
5
P
PrintablesSaddamCZ

Skull cymbal nuts for a drumset

A set of skull-decorated cymbal mount nuts for a drumset (designed for Roland e-drum mounts, but will sure work for others too). The skulls were remixed from a wonderful design by bugman_140 (…

Downloads
318
Likes
40
Rating
5
P
PrintablesLucianociri

Herramienta Precisa para Proyectos de Carpintería Escuadras de Ensamble en X y T para Muebles de Melamina 16mm

[EN] You can find the description in English below [ES] Escuadras de Ensamble en X y T para Melamina de 16mm Estas escuadras de ensamble en X y T son la solución perfecta para quienes trabajan con melamina de 16mm, proporcionando una…

Print approx. €5.45–€6.66 excl. taxPreliminary estimate for one variant

Downloads
314
Likes
62
Rating
5
P
Printablescelly

Honecomb pen holder

A small pen holder. Originally designed for my wife's bathroom shelf makeup.

Print approx. €2.87–€3.51 excl. taxPreliminary estimate for one variant

Downloads
313
Likes
29
Rating
4.67
P
Printableslitlnemo

Flamingo remix with forward/backward limbs

This is a remix of a remix! Asdesign's remix of MakerBot's flamingo is quite charming, but I didn't like its splayed-sideways leg position. I decided to remix it to put the legs in a forward/backward “walking” position. The flamingo…

Print approx. €0.89–€1.08 excl. taxPreliminary estimate for one variant

Downloads
299
Likes
62
Rating
5
P
Printablesnetpaq

Pool Skimmer Net Adapter for Gardena Combisystem

I was under the impression that all pool net skimmers have a standard size handle only to find out that mine is too large for the model that I initially printed (and remixed). I needed a much longer tube holder with a larger diameter. The…

Print approx. €2.72–€3.32 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
295
Likes
21
Rating
5
P
PrintablesMJPrints

Nightwing Emblem

Nighwing's Emblem from the Gotham knights game

Print approx. €0.50–€0.61 excl. taxPreliminary estimate for one variant

Downloads
293
Likes
35
Rating
5
P
PrintablesPeter Farell

Goomba Tower Doctor / Finger Puppet

Goomba Tower Doctor + Goomba Tower Doctor Finger Puppet

Print approx. €2.41–€2.94 excl. taxPreliminary estimate for one variant

Downloads
277
Likes
149
Rating
5
P
PrintablesLucianociri

Escuadras de Ensamble en T y X para Muebles de Melamina de 15mm

[EN] You can find the description in English below [ES] Escuadras de Ensamble en X y T para Melamina de 15mm Estas escuadras de ensamble en X y T son la solución perfecta para quienes trabajan con melamina de 15mm, proporcionando una…

Print approx. €5.43–€6.64 excl. taxPreliminary estimate for one variant

Downloads
262
Likes
23
Rating
0
P
Printablesmultilayers

STANDING NUMBERS 0 TO 9

Standing numbers 150mm (height), 100mm (wide). You can resize them in your slicer.

Downloads
261
Likes
25
Rating
5
P
Printableshebel78

Pot vase (honeycomb)

Download and print in vase mode.

Print approx. €1.70–€2.08 excl. taxPreliminary estimate for one variant

Downloads
249
Likes
44
Rating
5
P
PrintablesJames Bond

Jumbo Spindown D20

A large Spindown D20 (Icosahedron) to use in a game, or just for aesthetic purposes. Printing Tips - If you do not use the included G-code: Supports are necessary (but not for bridges) A high infill % will take a lot longer to print, but…

Downloads
233
Likes
23
Rating
0
P
Printablespmeineke

Minnesota Timberwolves

Minnesota Timberwolves

Print approx. €1.08–€1.32 excl. taxPreliminary estimate for one variant

Downloads
227
Likes
16
Rating
5
P
PrintablesJSeppl

3DSets Landy License plates / Number plates

Collection of different license plates for the landy model from 3DSets. Overview Cal01 - 1 Color change. BadNews - 4 Color changes. BLOB Galactic Empire - 1 Color change (BLOB = Big Lump on Board).

Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant

Downloads
216
Likes
46
Rating
0
P
PrintablesDaHouzKat

Original Prusa Enclosure Left Filament Guide and Adjustable Thermometer Bracket Combo

Features Combines the Adjustable Thermometer Bracket and the Filament Guide Enables to use a second spool holder on the left side Uses the same hardware as for the filament guide What you need Printed parts thermometer_bracket_A (1x)…

Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant

Downloads
208
Likes
72
Rating
5
P
PrintablesWillemde20

InfraRed Thermometer holder 18mm for Honeycomb storage wall

Simple mount to keep the Thermometer secure and in one place

Print approx. €0.39–€0.48 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
207
Likes
31
Rating
4.8

Combined Gotek and CF-ide in 3.5" disk drive

I have a Gotek drive and CF-IDE card reader for my Amiga 4000. As I already use the 5,25” bay for a CD-ROM drive, and one of the 3,5” bay’s for the original Floppy drive, I needed another solution. My A4000 has a standard height floppy…

Print approx. €2.32–€2.83 excl. taxPreliminary estimate for one variant

Downloads
204
Likes
23
Rating
5
P
PrintablesSnipeX 3D

Mintion Beagle Cam Mount | Bambu Lab P1P Cam Mount

This is a mount for the Mintion Beagle Cam to mount it on your P1P. To slide the cam in place you have to put it upside down on a 45 degree angle into the Mount and twist the top in to secure it. Printing Parameters: Walls: 4 Layer hight:…

Print approx. €6.96–€8.51 excl. taxPreliminary estimate for one variant

Downloads
197
Likes
38
Rating
0

Modular Ultimate Casing for Prusa MK4 (including bulletproof, hexagon/honeycomb and Voronoi style inserts)

Please support the original designer and check out their now updated (for MK4) original model that can be found here before considering this model as an alternative. Please excuse the current documentation on this project as I am still…

Print approx. €10.85–€13.26 excl. taxPreliminary estimate for one variant

Downloads
189
Likes
60
Rating
5
P
Printablesddpt

Blow gun nozzle. Embout pistolet de compresseur

Pas de support. Remplissage 100 %. 0.15 mm. Prusament PETG Clear.

Print approx. €0.30–€0.37 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
185
Likes
22
Rating
5
P
PrintablesSJM

Kfz Kennzeichen Sample (German-EU) license number plate Zweizeilig

Deutsches Beispiel EU-Kennzeichen Kurz und Zweizeilig. More of my license number plates: https://www.printables.com/model/1200241-kfz-kennzeichen-sample-german-eu-number-plate-einz…

Print approx. €5.38–€6.57 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
178
Likes
13
Rating
0
P
PrintablesPenguinNinja

Thumbscrew for eco-friendly deskside trash bags holder

This is a remix of Eco-friendly deskside trash bags holder by rin_ofumi that replaces the original screw with a thumb screw. Since I move the holders often, this allows for install without a screwdriver.

Print approx. €1.22–€1.49 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
175
Likes
21
Rating
5
P
Printablesecsv

Parametric heater sidewall clip/Brötje Klemmbuchse

The Brötje radiators use 4 plastic clips (2 on each side) to hold the metal side panels. They have to be attached to two pipes inside the radiator. They are rather tight and tend to break when removing one site panel for cleaning…

Print approx. €1.36–€1.66 excl. taxPreliminary estimate for one variant

Downloads
173
Likes
8
Rating
0
P
PrintablesFAB 3D

Maraca Maracas Musical Toys percussion - Strumento musicale Maracas per bambino

Maracas per bambini. Ho creato questo strumento per mia figlia con disabilità. Essendo di un diametro giusto per le dimensioni della sua mano e con un manico più lungo di quelle in commercio, riesce a farle suonare. Stampata in più…

Print approx. €3.11–€3.80 excl. taxPreliminary estimate for one variant

Downloads
173
Likes
34
Rating
0
P
Printablesarscreo

CRYPTEX - ICON/EMOTICON/SYMBOL Letter Wheel (& Blank Letter Wheel .STEP file)

This is a Letter Wheel Replacement for Cee's CRYPTEX with Symbols, e.g. Cat, Dog, Hamster, Unicorn, Mermaid and various other Animals, Fruits and Icons. Perfect to enable children who can't read yet to use and enjoy this awesome CRYPTEX…

Print approx. €0.83–€1.02 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
157
Likes
24
Rating
0
P
PrintablesTeo_211

Lamborghini Huracan STO Top View Wall Art

Wall Art Silhouette model of the Lamborghini Huracan STO from a Top View. Adjustable size. I accept model suggestions.

Print approx. €1.68–€2.06 excl. taxPreliminary estimate for one variant

Downloads
155
Likes
43
Rating
5
P
PrintablesExomaker

Plant Climber Structure for Tomatoes Beans and Climbing Plants

New version V2 (Reduces filament usage and printing time in half. It also works with 4 sticks instead of 3, making it more resistant.): https://www.printables.com/model/577962-plant-climber-structure-for-tomatoes-beans-and-cli In Spain,…

Print approx. €17.26–€21.09 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
155
Likes
135
Rating
0
P
PrintablesBartek

Cable Comb v5 (cat7 insert)

Cat7 insert for Cable Comb v5

Downloads
153
Likes
18
Rating
5
P
PrintablesDaTTcz

HEXA podtácky se vzorem plástve (HEXA Coaster with honeycomb pattern) - OpenSCAD parametrizable

Nastavitelné parametry umožnují přizpůsobení modelu. Upgrade: v1.1 - verze bez knihovny BOSL2 v1.0 - Model využívá OpenSCAD knihovnu BOSL2. Najdete jí zde: https://openscad.org/libraries.html

Print approx. €1.16–€1.42 excl. taxPreliminary estimate for one variant

Downloads
144
Likes
20
Rating
5
P
Printablesplempicki

Skincare organizer - The Ordinary honeycomb

Simple organizer for eight 30ml bottles.

Print approx. €8.01–€9.79 excl. taxPreliminary estimate for one variant

Downloads
136
Likes
16
Rating
0
P
PrintablesMixMasterMoo

Zodiac MX6 and MX8 Pool Cleaner Swivel Assembly (REMIX by MadLabRemix)

My Zodiac MX6 pool cleaner swivel assembly broke and the only thing available I can find on amazon is this complete set ( https://amzn.to/446w9Kp ). Luckily, I found the particular part I'm looking for made by BrianM2. I remixed his…

Downloads
131
Likes
4
Rating
0
P
PrintablesJohnM

Number plate storage box

Designed to carry a complete motorcycle puncture repair kit, this has the holes already in place to suit the rear of a BMW R1250GS, and most likely the R1200GS and others. The existing number plate screws hold it to the bike, then a…

Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant

Downloads
124
Likes
17
Rating
0
P
PrintablesFabian

Ambilight for any pc monitor tutorial (prismatik, arduino nano, ws2812b)

The housing with lid is part of the Ambilight Monitor project. The case was printed with PLA. The following components are also required for the Ambilight: Arduino Nano Power supply 5V 2A ws2812b 88 LEDs (32 Top, 19 Left, 19 Right, 18…

Print approx. €0.69–€0.85 excl. taxPreliminary estimate for one variant

Downloads
121
Likes
97
Rating
5
P
Printableskiam02

comb

Comb I need a new small comb for sports and traveling. So I constructed a new comb with plasticity. It will ensure the survival of the hair. The comb is 89 mm long, 27 mm wide and 4 mm high! Printing a comb is a challenge. Happy Printing

Print approx. €0.86–€1.05 excl. taxPreliminary estimate for one variant

Downloads
121
Likes
7
Rating
0
P
PrintablesMark McIntyre

Prusament Spool Ornament (with screwtop assembly)

This is a remix of Q52's fantastic Prusament Spool Ornament, but with a screwtop design that eliminates the need for difficult-to-remove supports. The “bottom” can be printed with a layer colour change to print whatever colour of filament…

Print approx. €0.62–€0.76 excl. taxPreliminary estimate for one variant

Downloads
119
Likes
60
Rating
5
P
Printablesdfn5

Kombat Koaster

Prepare yourself. This is a drink coaster with the old classic Mortal Kombat logo modelled in SolidWorks and printed with Hatchbox PLA Red and Black. … Fight!

Downloads
106
Likes
11
Rating
0
P
PrintablesThe Mapster

Age of Empires Bombard Tower

Closed in the top floor and added cannons. When printing, make sure to include supports under the cannons and a brim at the base to keep it stuck down on the plate. I uploaded my .gcode version at 0.05mm Ultradetail with supports as…

Print approx. €9.54–€11.66 excl. taxPreliminary estimate for one variant

Downloads
105
Likes
18
Rating
5
P
PrintablesTeo_211

Bombardier CRJ-900 Wall Art

Bombardier Canadair Regional Jet 900 Wall Art Silhouette model. Adjustable size. I accept model suggestions.

Print approx. €0.84–€1.03 excl. taxPreliminary estimate for one variant

Downloads
95
Likes
19
Rating
5
P
Printablesdavyvp

Sage Breville Bambino plus anti-rattle clamp

This clamp prevents rattle from the drip-tray on the Sage/Breville Bambino plus. Easy to remove for cleaning the drip-tray. I printed this in PLA

Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant

Downloads
94
Likes
17
Rating
5
P
PrintablesOutlawECHO

Patio Table - Umbrella Support

This is an insert to support the umbrella for our patio table. These support both the umbrella in the holder on the ground as well as aligns the umbrella at the table hole. This is a simple design, but I have provided .STP files so you…

Print approx. €0.78–€0.95 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
94
Likes
14
Rating
0

Sensory play stamp cubes: Alphabet and Numbers

The stamp cubes measure 4×4×4 cm. There are 6 letters or numbers on each cube that you can use to stamp into modeling clay or kinetic sand. The cube develops fine motor skills, and helps the children when they start learning to count,…

Print approx. €4.28–€5.23 excl. taxPreliminary estimate for one variant

Downloads
93
Likes
31
Rating
5
P
PrintablesAlvomane

Ergonomic Handle for Slingshot Conversion | Ergonomischer Griff für Katapult-Umbau

EN: This is an ergonomic handle for converting an inexpensive Chinese telescopic slingshot (see last two pictures). Thanks to the brilliant OpenScad script by Anachronist aka Amatulic , I was able to create a handle that fits perfectly in…

Print approx. €4.98–€6.09 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
90
Likes
6
Rating
0
P
PrintablesPeter Farell

Embryonic Alien in Seed Pod

Embryonic Alien in Seed Pod

Print approx. €16.13–€19.72 excl. taxPreliminary estimate for one variant

Downloads
88
Likes
36
Rating
0
P
PrintablesMikeL

Famous MBTA Kenmore Fenway Park Subway Station Sign - Red Sox

This is a 3D rendering of the famous Massachusetts Bay Transportation Authority (MBTA) or “The T” subway station sign. The Fenway Park subway station sign that leads to the home of the Boston Red Sox.

Print approx. €1.95–€2.38 excl. taxPreliminary estimate for one variant

Downloads
88
Likes
7
Rating
0
P
PrintablesKikeMaker

Collar con símbolo de la Paz.

Sin soportes y de impresión muy fácil.

Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant

Downloads
85
Likes
4
Rating
0
P
PrintablesPeter Farell

Columbus Crew Logo

Columbus Crew Logo

Downloads
85
Likes
14
Rating
0
P
PrintablesNISAkuh

GoBilda FTC Battery Mount (No Number/Name)

This GoBilda Battery Mount is specifically designed to securely hold your Gobilda batterys during competition or practice. It provides a snug fit for GoBilda-style batteries, ensuring stability even during high-speed movements or impacts.…

Downloads
80
Likes
4
Rating
0
P
Printablese0en

IKEA RÄNNILEN assembly tool

This 3D model represents a small, durable plastic tool that accompanies the IKEA RANNILEN water trap . The tool is showcased below, as it appears in real life: Designed specifically for the IKEA RANNILEN series, the tool is essential for…

Downloads
80
Likes
5
Rating
0
P
PrintablesStrider Varun

Rhombagon Spiral - Large Plant Pot

Need a plant pot that barely fits the print bed? No Problem! Don't like the size? Scale it down (or up if you wish) to suit your needs. There are two parts to this, the pot (for your plant to sit in), and the frame (for your pot to sit…

Print approx. €18.68–€22.83 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
78
Likes
18
Rating
0
P
PrintablesAlid

Philadelphia Eagles Cookie Cutter/ Embosser

Wanted a Philadelphia Eagles cookie cutter with sharp cutting edge for royal icing decoration. GO BIRDS.

Print approx. €0.95–€1.16 excl. taxPreliminary estimate for one variant

Downloads
75
Likes
4
Rating
0