583 models
Is your i3MK3S+ printer wanting you to unload filament and reload filament in the middle of print for no reason? What's happening here is that the lever arm inside the extruder isn't fully blocking the light inside the sensor when the…
Print approx. €0.14–€0.18 excl. taxPreliminary estimate for PETGSource material: PET
This is a modification of the Wandering hour clock published by TypicalTinkerer. I only put modified files and additional files. I glued the white hour numbers with acetone. I glued a thin white minute dial on the black minute dial, but I…
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for one variant
Just a helpful remix and a very interesting learning experience for me.
Print approx. €5.05–€6.17 excl. taxPreliminary estimate for PETGSource material: PET
7x threaded inserts M3 2x threaded inserts M6 7x M3x8 DIN 7991 2x M6x16 DIN 933
Print approx. €4.92–€6.02 excl. taxPreliminary estimate for PETGSource material: PET
I edited one of the siren's gears to add an option of inserting three 22mm bearings. Use my 3mf file to get the perfect slicing.( higher infill on the sides of the gear) Here is the original design + the place to get all the other files…
Print approx. €4.78–€5.84 excl. taxPreliminary estimate for one variant
Found this amazing model of an Ender 3 v2 to make mods for. This will save you lots of time and headaces. This STEP file allowes you to make designs for the Ender 3 v2 without having to mesure everything on the machine. I used Fusion 360…
Pastamatic Filament Spool Winder Modifications Changelog: 2024-02-23 Added options for huge spools and small spool with spacers. Thanks to Ch3vr0n for the idea and testing of the spool spacers Modifications to GekoPrime's winder to better…
Warning: this mod is experimental and needs engineering and mechanical background to build. No guarantee and very little support provided by me. This is a modification you can add to your MK3s to be able to print 90° overhangs without…
This is a modification of the ubiquitous PS5 controller mini wheel add-on by pixel2: https://www.thingiverse.com/thing:4693372 Here is a video of it being printed and operated: https://youtube.com/shorts/xQ8_doe1zzo My modification…
Hi Folks! Thank you for your patience. It’s been quite a long journey developing the FlexATX version. I had to wait for another BC-250 board to arrive because my previous system suffered a brownout after I accidentally caused a short…
These models are directly from Elegoo, they are replacement parts/upgrades for their FDM printers. Some of these come preloaded on their usb drives. I've pre-ordered a Neptune 4 Pro and will post prints once I have it! Elegoo Neptune 2,…
Flash Forge Adventurer 5M (AD5M) Fan noise reduction Hot end. Best Modification Reinforced weak areas in the print. (fail areas) Can be printed in standard PLA. The front section thickness increased. Front-facing plate has room for your…
So, this is my version of a Linear Rail Prusa Bear. Thank you to Grégoire Saunier for his fantastic work on the Prusa Bear, as this provided me with a fantastic starting off point. This will continue to be added with details, but the…
Edit: 09-May-2023: Part #3 added: Before I printed my spooler I dragged every part into TinkerCad, an assembly. Two parts I remodelled marginally: The big base part was reported to be poorly fixed on your workbench, so I extended the base…
Liked? Like for the sake of decency, do you think it’s easy to create modifications? Modification for belt tensioner Creality K1, K1C, K1 MAX Gives greater stability to the tensioner; with its help, possible distortions are eliminated.…
Update 30.11.22: English translation added (scroll down) Ich habe vor ein paar Tagen einen Sculpfun S30Pro Lasergravierer bekommen. Die Maschine ist klasse, benötigt aber meiner Meinung nach ein paar Optimierungen: 1. Cablechain Die lose…
The original article is well done, I needed to adapt it to a specific case, I ended up modifying the fit of the 2 pieces.
Modelo modificado a partir del realizado por el usuario tksgeo La idea de mi modificación era hacerla compatible con una luz led de botón , sin necesidad de conectar cables y tener así un diseño más limpio. Para mantener las tapas en su…
These are the parts I constructed to modify the monobloc air conditioner PAC EX100 from DeLonghi from 1 hose to a two hose setup. The parts are relatively big, since the air intake area on the air con is quit big. The parts fit the Prusa…
I made the original DeSteiner M1887 2 years ago, and recently I revisited it, so why not making a variant with stock and a long barrel? I combined barrel-tube part 2 and 3 so that I don't have to assemble them and to reduce connection…
I've uploaded these here as there appeared to be interest on a Reddit thread but note that this is a work in progress. The main guides and parts were all printed in Yellow Elegoo PETG Rapid and the rise blocks in JAYO PLA+ Grey as I ran…
UPDATE March 2025 All please NOTE …. this is valid for all of my Sculpfun related designs: The Sculpfun modells AND accessories incl 3rd party DO COME WITH VARYING SIZE PARAMETERS. My Laser Frame size is: X-Direction 510mm and Laser…
Introduction This repository is Meanwell LRS-350-12 Version. If you are looking for FlexATX version, please check this out. ⚠⚠⚠ A compact industrial-style enclosure designed for the AMD/ASRock BC-250 accelerator. This case was built…
Modified parts for the Flashforge AD5X enclosure to be easier to print.
These are my various modifications to the Harbor Freight Sand Blasting Cabinet (SKUs 68893, 93608, 62144, 39170). My goal was to make as many of the modifications as possible to be 3D printed parts. Note that in addition to the .STL…
Testing the original WCW Mouthpiece, I was exited by the sound and easy playability of the 64 series. But there was one problem: to tune the sax I had to pull the mouthpiece so far that it nearly dropped of the s-bow. So I designed an…
Modifications: 1. Add bracket cage 2. Increase the length of the pointer slide rail.
Front-Mounted 5015 Blower Mod for Qidi Plus 4 This is a modular front-mounted 5015 Blower mod for the Qidi Plus 4 made for using the stock inductive bed-meshing probe, or either a Beacon or a Cartographer eddy current bed-meshing probe.…
Allows you to change the direction of the Oase Crystal skim 350 flow
Prusa XL & soft TPU With soft to very soft TPU filament, the resistance in the PTFE tubes is too high and cannot be printed even if the filament sensor being deactivated. I created a bypass with ball bearing rollers for this purpose. I…
To make your own Portal Gun with light and sound you need parts from here: https://www.thingiverse.com/thing:3579224 and change them with parts from here (Filenames will guide you).…
Material: 5015 Fan: https://amzn.to/48iaoK5 PETG: https://amzn.to/41nVEqF Overview This document details a custom modification for the Ender 3 V3 SE 3D printer, featuring the installation of a 5015 radial blower with an innovative 3-way…
Designed this for my Display4Top Airbrush Spray Booth, as the stock vent attachment for the extractor fan was too long and meant it hit the wall. I designed this so that it would clip on and give me more space with the unit, without…
This is an addition to fashion. Roted for the left tensioner. The right is original
Join the EnderXY community on Reddit: https://www.reddit.com/r/EnderXY/ I'd recommend printing in PETG at least, although around 30% of my initial testing was done with PLA and didn't notice any issues. Updated 19/05/25: Fixed an issue…
Click here to download RIGHT SIDE belt tensioner
set the 2 stl files to be print in the same time placing them alongside as reported in the picture. In this way the central part of the first hinge will be print inside the second part while the print goes on
This design allows for quieter operation, but also significantly improves stability and rigidity of the y axis. For a double linear rail design, it is important to not over constrain the carriage in order to allow for smooth operation.…
This modification is to enable the full print volume of the Prusa i3 MK2.5,MK3, MK2.5S and MK3S when fitted with a Volcano heater block and nozzle without any firmware changes. Included in the modification are adjusters that fit between…
Hardware needed to install Cap/Button Screw M4x6 - 8pcs (Screw on PSU) Cap/Button Screw M5x10 - 2pcs T Slot Nut 2020 M5 - 2pcs Factory power supply mount screws - 2pcs Print as oriented in the slicer picture. Print 2 brackets and one…
This design allows for quieter operation, but also significantly improves stability and rigidity of the y axis. For a double linear rail design, it is important to not over constrain the carriage in order to allow for smooth operation.…
Je vous présent la modification de la colonne Dremel 4000 . J'ai créé cette mini fraiseuse à partir de la colonne Dremel d'origine, modélisé sur fusion 360. Pratique pour travaillé le bois le plexi l'aluminium tendre , et pour tous…
Extra large poop bucket for Qidi X-Plus 4. 100mm deep 200 wide 266mm tall It mounts easily on the rear vent cover over two large locator pins. Hangs just above the table top. 5 different types: 40mm fan Hex - Requires 4 - 3mm x 20mm…
Diseño estilizado y se añaden 2 orificios para pegar imanes redondos de 1x3mm por debajo para pegar en la nevera Category: Kitchen & Dining
The original Creality Raptor Cable Organizer from firstgizmo is amazing and I love to use it. It had only one flaw, the plug was left loose inside the case. I modified the top part, where the power supply connects, so it can also house…
It adds space for the co2 cartridge plus a bullet storage, so that the cartridge does not fall out, it is necessary to stick foam on the inside as in the photo
In 1995 Aster Hobby made a beautiful gauge 1 (1:32) live steam model of a German Preusian Railways (K.P.E.V.) T3 / Deutsche Reichsbahn 89 7462 ( http://www.southernsteamtrains.com/akpevt3br89.htm ) When upgrading this model…
This charging cradle is based on Nintendo's offical one however this cradle works with your original cable. All the features are the same it is easy to insert and remove with no force needed. There is also a cut out for the notification…
Symfonisk Speaker Modification to Stand-alone Amp This model converts a Symfonisk Speaker into a stand-alone amp that can be used with the Sonos ecosystem. This Amp will output to a woofer and tweeter but could be modified to output to a…
Update 03.07.25: Removed a little Design error. Thanks to @NickBerczyns_2829932 A small modification of the great model from D3D-Concept. I kept having problems removing the newly welded, still hot and soft filaments cleanly from the…
This modification should make the all axis perpendicular to each other and the z-axis also should be more rigid. Originally I planned to mill the z-plate. This version will came in the future, here I want to share a printable version.…
Using as base of the hydroponictower a flower pot I had (with diameter 25cm) to change the stand and using an EHEIM-pump I added a top for water sprinkling and with tube mount for the 12/16mm EHEIM-tube. As top-parts I used the one from…
I wanted to have the printer enclosed but with the power supply outside which makes maintenance a bit difficult. So I modified a few pieces in order to make the left and right acrylics removable. I also added a hole to the hings in order…
I make several models to help with cooling my KS0 Pro's. There are two fan shrouds: Version 1 is designed to direct air only down the center where the FET's are and there are two mounts as i was testing it on both sides. Version 2 directs…
¡La compañera perfecta para tu demonio macho – Succubus Infernal! Diseño 100% original: demonio femenino seductor y letal con alas de murciélago extendidas, cuernos curvados elegantes, cuerpo atlético musculoso, látigo flameante en una…
Flash forge Ad5X/5m led holder printer. (stock light upgrade from factory OEM) Printer name is optional if you want to add it in your splicer. The light I purchased here . < Amazon No screws needed, double-sided tape into position. (I…
Side air vents vary in size, along their length, in an attempt to equalize pressure. Middle air vent is now directing more air towards the hot end, which in my testing eliminated cooling issues I've noticed. Normal supports seems to leave…
Disappointed with the clunkiness of the printed parts to the enclosure for the FlashForge AD5X I tweaked the files provided on FlashForges website to something closer to my tastes. Initially this was to remove the recessed printer name…
I've had issues with some sizes of spools sliding over to the left sides of the slots in the Hydra AMS which causes the spools to rub on the Hydra frame and also ride right on the edges of the rollers which is causing them to wear down…
I took Adrian's good chute and modified it to meet my needs. A bit wider, with a curve at the end to fling the poop to the side a bit, to fit my setup. No supports are needed. I printed in PLA on the textured PEI plate with no brim. Model…
i use airtight buckets as filament storage. for this purpose i modified the lid of drycontainer below a bit. special thx to https://www.printables.com/de/model/65922-silica-gel-spool-container
This is a collection of 3D-printable parts that can be added to a LumenPNP v3 pick-and-place machine to allow the use of Mark Maker's (makrzone) ReferencePushPullFeeder feeder. I've had very good success with these feeders and I really…
Modifications on role screws and Also modeled slots for two 8 mm steel rods that run the length of the middle section,
I printed mine in ASA, but this should work as well with any filament as long as the hotend is room temperature. As the original, no supports are needed.
All credit to @MarkusA380 for the base model I just made some modifications that worked for me. If you want help designing or building a base mount or the correct dovetail adapter for your build let me know i'm happy to help! The…
These are slightly modified parts for the wandering hour clock. I made the Numberwheels a bit thicker and enlarged the hole for a heatset insert. The screws I was originally using poked through the front of the original parts so I made…
Modifications for axle fit and function. Added spacer to hold sled axle bearing in place and another for the worm gear.
I redesign for example the blower but I kept the original vertical duct and the air filter. The original blower did not have a shell all around. The top was not strong enough to support the vertical duct. This is why I redesigned a new…
Updated 13 March 2022: Added more support for the fan, it was prone to breaking; BV2-R2 v2 in the files section. Also, realigned the mounting holes so it stays above the nozzle and extended the fan duct further back to get better…
Edited versions of the Guard, Bottom, and a added chain to make the katana look like ichigo's Bankai from bleach.
Thanks to leositu for the bracket and component cooler. This is a collection of parts for modifications to the X5SA. Installed a Volcano nozzle but continue to use the original cold end. To do this I modified the holder and cold end fan…
The original Model and the rest of the needed files for the complete assembly are found here: USB Microscope Stand by D.McReynolds | Download free STL model | Printables.com
I have already a number of round hydro-meters so i created a small item that can be placed in the original lid. It uses a very small amout of fillament. I have bad experience with print in place clamps for a lid. So i created clamps that…
Simple dial indicator mount which slides on to the extruder motor and does not require any modification to the printer. Simply print the part, bolt the indicator to it, then slide it on your extruder motor. There is a spot for an extra…
This model represents the functioning cowl flaps on early Vought F4u Corsairs (non-D or later), but could be modified to work for D and later models. The original design set the flaps in the open position via springs using the airflow…
BikeCyclist's Improved Auto Coin Sorter is a great model: https://www.printables.com/model/53272-improved-auto-coin-sorter But I had some issues during printing and during operating the coin slide. So I made the following changes: changed…
I designed it all on my own. Hope it help. You will need 2x M3x27 bolts and 2x M3 nuts Rest of bolts are included to gun
Purpose This model was designed to rise and rotate the thermometer that comes with the Ender 6 lid accessory, sold by CREALITY. It also creates a much smaller obstruction inside the lid than the regular thermometer does - this way nothing…
Here are my modifications to Matt Zwart's Dome Mechanism for R2D2. As I build his system I will upload all of my modifications as I create them. FYI, I am using an FDM printer for the base unit and anything that pops up through the pie…
Back plate for M5Stack Cardputer enabling easy modifications (via provided .f3d file) , or change with origial one. Remix it as you like. You maybe will need to increase tolerances becouse I tried to make all holes as tight as possible.…
I liked many of the waste buckets but needed to make my bucket fit the exact space I had behind the printer (and add a bit of text). Of course this is not a new design hence the remix attribution. But it is a new model in fusion 360…
You can simply print it in any PETG. During assembly, I recommend using the pliers included in the Prusa kit to make the job easier. Once the chain is assembled, move it by hand to clean off any burrs on the pins.”
This is the headlight from the 3Dsets models with a hole in it for a LED light. It works really well with this lens: https://www.printables.com/model/237490-headlight-lens-cover-for-the-3d-sets-landy/comments/454368# Print in Silver Silk…
Hello, I found the original LED kit quite ugly, so I designed new brackets and a diffuser to fit it. The inclination is made at 45° to better distribute the light. You can manage the wires into the support (see photos) and hide it in the…
Modification for Tukkari TLX (Prusa Mini) enclosure, stops the rear extractor fan from touching any walls, giving space for the fan to work and not be obstructed. Print Settings Printer Brand: Prusa Printer: Mini Rafts: No Supports: No…
I started to make the original enclosure, but very soon I realized, that design of some parts is not the best. The position of main switch on the power supply does not have any sense, it is located back and under table... I wanted to…
Here are some modifications I put together to widen the stance of the Wheel B set for the 3D Sets Buggy. Spacer: Makes the front wheels a bit wider and grips the foam tire core for less lateral tire movement. The goal was to stop the…
This requires no modification to the lantern itself other than two solder connections. I know of two different types of these lanterns. Type 1, as I call it, is the older version that I have had for the last year or two. Take off the…
This is a design for modifying a COSORI 11.62" Food Dehydrator CFD-N051-W; 350W--will NOT fit the Cosori CFD165FD 13.8" 450W model! . The shell allows drying two spools of filament at a time. I used Polymaker Transparent PETg. On the…
This is a modified Futaba J connector mount for the Prusa Mini extruder filament sensor modification designed by Czech Maker . The changes are: Click-in socket for the Futaba J connector from the Prusa Filament Sensor Socket is keyed so…
Commonly on smooth rod and linear bearing systems, such as the Prusa/Bear, the Y Axis in particular creates a louder noise comparatively to the other axes. Printers, such as the well known Ender 3, exhibit V-Slot systems which allow for…
Useful links first Download PDF User Manual (Build guide) Github repository with the software installer Latest script release page Support thread on Prusa Forum Introduction This is a small modification of Prusa Enclosure which offers an…
This is a remix of MysticTome's excellent Betrayal at House on the Hill 3rd Edition box organizer – specifically the parts that don't fit on the bed of a Prusa i3 mk3 (S/S+). The files include: Betrayal_3rd_Player_Board_Prusa_i3 : the…
This is a modification of @VolkervmLOGICnet 's excellent MIK adapter plate . The only change is to screw P3 to P1, instead of glueing them. Materials required In addition to the materials required for the original, the follow materials…
FERULA DISEÑO MEJORADO PARA FRACTURA DE CODO, SE DEBE AJUSTAR AL TAMAÑO DEL BRAZO DEL PACIENTE, SE USA TORNILLO DE ¼ X 1" COMO PIVOTE
This is the first model of an insert I intend to customize for small tool set organization. More versions will follow with modifications for specific hardware.
Prusa XL & soft TPU With soft to very soft TPU filament, the resistance in the PTFE tubes is too high and it cannot be printed reliably and to the correct dimensions despite the filament sensor being deactivated. I built a bypass with…
On the Scheppach DC100 the inlet blows straight onto the motor assembly and clogs up the filter. I wanted to change the direction of the inflowing air to get some cycloidal action going. Angling the 100mm hose would require a much bigger…
At the request of a friend I looked at the design of this case. Brilliant as it was when he described the power handling I felt that the addition of air vents below the PCB would be a good move, and therefore that some feet would be…
I added a 40x40 fan to the Einsy housing. It reduces the internal temperature dramatically. Its perfect for using the Pi Zero 2 W. I printed it with 15% infill. Perfect for 40x40 nocuta 5v. You can take pin 1 and 7 from P3 for power.
