147 models
My friend wanted to fit his VW T5 Caravelle with a solar panel and put an MPPT charger in the trunk, so I designed this adapter for mounting the head unit to the dashboard. It requires 2 empty accessory slots + a hole / another slot to…
EN: Box for 10 different stamp motifs. Material : Stamp handle: PLA, PETG Layers : Stamp handle: 0.3mm, 0.2mm as desired Supports : no Motifs : smiley-2c smiley-2b smiley-2a smiley-1 flat-ist-borin Stamphandle: Stamphandle…
Update 9/7/25: Added a V2 version with improved grip pattern and tweaked greebling for multi-color printing. This remix has the same install instructions as the original model. Just unscrew the bottom two screws of the magwell, slightly…
Handguard/barrel shroud for the Xshot Motorized Piston Pump. Available in Keymod or MLOK. Also has an integrated QD sling mount. Friction fit- no hardware required.
If you enjoy my creations/remix, feel free to support me via buy me a coffee- https://buymeacoffee.com/spydergiant This is my own X-shot MPP shroud that I modeled and designed to try to make it look as factory"ish" as possible. Side…
So, my crack at a shroud for the MPP, it sports two picatinny rails that are held in by dovetails and two cosmetic plates so you can color match a bit depending on your paintjob or in case of the original blaster just make it light blue…
Update --------- BCAR Shroud 1.1 ------> X-Shot MPP (or LONGSHOT 2.0 with EXTENDED custom barrels) + optional Barrel Color Sleeve for the MPP Wrap two to three layers of e-tape around the narrower rear section of the BCAR and insert it…
Spring spacers for your MPP. Available in 2.5mm-10mm sizes, can technically stack them but I don't recommend it. Start small and go from there, I don't know what the max safe precompression on the stock spring is. Print something like…
A toolless, fixed stock that reuses the stock battery door locking system. This version shortens the length of pull to just over 13". Other than gluing the ‘grill plates’ to 'retainer' all the assembly remains toolless, held together…
IF YOU REMIX THIS, PLEASE LET ME KNOW, legally I can't oblige you to. But I would love to know what you make so I can add a list of remixes to the post! The 40max shells are super popular, but strangely enough lack a large amount of…
Update 7/31/25: Added a closed version. I like to see the inner workings of a blaster so I designed this open jam door. No need to disassemble the blaster. Simply snap in place and secure with the original screw. Models are print oriented…
This is the barrel shroud by High Country Blasters, now logoless and with added tabs for a cleaner appearance. I printed mine with 4 walls and 15% gyroid infill. Printed at a 45° angle with the blaster-interfacing end in the air. Use…
Introduction A replacement frontend for the XShot Motorized Piston Pump blaster. This shroud replaces the stock front orange piece (and its collet). It uses the tension-band barrel retention system I've been using on some of my personal…
Victron Energy MPPT WireBox There are various sizes available: MPPT WireBox-S 75-10/15 MPPT WireBox-S 100-15 MPPT WireBox-S 100-20 MPPT Wirebox-M 100-30/50 & 150-35/45 MPPT WireBox-L Tr 150-60/70 & 250-60/70 MPPT WireBox-XL Tr 150-85/100…
So, here's another frontend for the XShot Motorized Piston Pump. Took me about 13 attempts, but the geometry of the frontend should very closely match the front end of the body. The main differences come down to me not really like the…
Simple print that uses less than 10g of filament. Adds width and grip to the existing charging handle. Making it easier to grab from either side speeding up your reload time. No need to modify or disassemble the blaster. Friction fit into…
Just some Low Poly Lampposts :) Fits well with the Low Poly People Pack: https://www.printables.com/model/811500-276-human-low-poly-people-pack-architectural-model
Update 9/6/25: Added V2 versions of both styles with improved grip pattern. 2 styles available. Friction fit (FF) and Hardware (HW). No support needed and models are print oriented. I recommend a .4mm nozzle or smaller due to the fine…
Update 11/13/25: Added scale adjusted files. These are slightly larger if you are unhappy with the original designs fitment. Includes three different versions ranging from sealed to protect your blaster from the elements to open for easy…
A remixed castle nut that allows strong hand tightening to avoid loosening or twisting of the buffer tube. It's been tested and it works extremely well. The knob ends are designed to avoid any collisions with the charging handle action.…
A guard for your tiny pp's! Refer to the original for the shroud's hardware to mount onto the blaster. Print with tree supports. There are two versions, one with picatinny only on the top, and one with picatinny on the top and bottom.
Replacement castle nuts for the buffertube stock on the Xshot Motorize Piston Pump blaster. I recommend trying the 04_clearance files first and then going down to 03 if too loose, 05 if too snug. On mine the first .5cm of threading was…
Cateye Ampp adaptator for GoPro mount
This is a remix of the Terrier Handguard from LoneWolf052 and the bottom Picatinny rail from the Utonagan Handguard Remix from HoneyBajjar. I wanted to have Picatinny instead of Mlok for the bottom rail of the Terrier since I liked the…
This model is compatible with the lego system.
A chassis for Korbanth's MPP 2.0 (possibly newer versions) Vader Lightsaber prop. I wanted something printable with as little support as possible, something that looks Vader-esque but not over the top with filigree. Initial efforts with…
(FILE-UPDATE → printed and tested) NICHT VERWENDEN BEI : Kamin, Gastherme oder anderen Gefahrenquellen bezgl Kohlenstoffmonoxid im Raum. Der Einsatz eines Rauch- und CO-Melder s wird an dieser Stelle auch empfohlen wenn sich derartiges…
Update 8/15/25: Four new shorter sizes have been added (XS, S, M, L) making for a total of 5 sizes. The full size hanguard works best with the original barrel length. Update 8/14/25: A wrap around grip has been added to the files. Print…
Update 8/6/25: Fantasy themed add-ons (last photo) can be found in the remixes. Update 8/3/25: Added a small Mlok picatinny rail that can be installed in any of the mlok slots. Update 8/1/25: New Small and XS handguards available for…
Drops in, no extra hardware or work required. Print 100% infill with supports as labeled
Update 9/5/25: Added Smiley and Stern emoji plates. Easy to print plates that friction fit into place. Blank set included so you can add your own logo or design. MPP Improved sights:…
Interference fit wide charging handle for the X-shot Motorized Piston Pump. I didn't like how narrow the release was, so this one allows for you to technically pull it from only one side of the blaster. It is very wide , so much so that…
Print flat with support, 100% infill, 5 walls
This model is a remix of the charging handle by N8than (loose tolerance version; which is still nice and snug, as the original was incredibly tight). The only change here is a thicker top shell for added rigidity, since the original was…
This mod requires the blaster to be opened, and replaces the stock collet that comes on the blaster. It does re-use the breach from the stock blaster - which is pressed into the “Replacement Internal Mate” as seen below. The collet can go…
Update 7/31/25: Added hybrid variation of the rear sight Update 7/30/25: Added V2 and V3 of the rear sight. Front sight is slightly lowered to account for dart drop and longer range of pro blasters. Models are print oriented. Cut 6mm…
REQUIRED HARDWARE : - 2x M5x30mm socket head screw - 2x M5 Hex nuts (Nylon lock nuts recommended) Can be printed without support
Designed to snap into one of the five attachment points built into the MPP. Includes two different styles. Models are oriented how I printed them but you may have better luck with a different orientation. These are more of a decorative…
Terminal Cover for the Victron Smartsolar/Bluesolar MPPT. Tested on 150/70 -Tr VE.Can. Should fit on all similar units from 150V to 250V. No supports needed.
Radian charging handle for the X-Shot MPP. Uses two 8 mm M3 bolts and two respective heat set inserts with a small spring (start looking through your old bin of Nerf parts or a pen spring). I have a whole box of different springs…
Reload With Peace of Mind Two basic versions included. Original and Shock. The original version mimics the original magazine bumper. The shock version includes cutouts that act as crumple zones(when printed in tpu) and 8mm of extra…
Iron Sights Color Inserts __ Easy To Aim + Clearly Visible __ X-Shot MPP The line of sight is parallel to the barrel. Rectangular rear and front sights at same height for easy and quick aiming like classic open sights. It is best to print…
USE DUCT TAPE FOR A BETTER FRICTION FIT Refer to slicer images for print orientation, most parts don't need support. Muzzle devices print muzzle down. M16 handgaurd requires longer barrel. M4-RAS handgaurd requires glue for the rails…
Screw reinforcement at front top of Stock-ish Stock, using an M3 x 25mm socket head screw and corresponding nut Additional hardware required: 1x M3x25mm screw 1x M3 nut Prints with same settings as original. Assemble all other parts of…
I printed the model in CF Nylon. Would also work in other UV resistant materials like ASA, PETG. There is a cutout in the bottom of the model that allows the Flarm cable to connect the housing, without the need to cut a hole in the…
These quick print charm accesorries attach to any of the five points built into the Xshot Piston Pump. No need to modify the blaster. Includes a fully printable version and a version that uses real chain instead. Models are print oriented…
Me: Can I get a sweetheart storm? Mom: We have a sweetheart storm at home. The sweetheart storm at home: All jokes aside, the MPP is an excellent blaster and this shroud aims to improve it futher. Features 28 mlok slots and includes…
Update 9/4/25: Added new versions with the cheek rest built in for easier printing. Marked CR in the files. This extended battery stock secures around the original buffer tube and doubles as an anti-spin clamp. Fits the original Xshot…
ENGLISH: Why did I take the MPPC? There were currently only holders that could hold a certain number of printing plates. I have now disposed of several holders because I have bought more and more plates over time. I wanted to remedy this…
Update 8/9/25: Adjusted the geometry of every base to better fit the magwell. Designed to fit: MPP Blaster Magazine Up to 15 Darts Barrel BCAR (with or without a shroud) Battery (has a cutout for charging while on the base) Charger Name…
It's my experince that 3D printed buffer tube rings, no matter how tight they were, always needed retightend after a couple of mags. Only accentuating the issue of the spinning buffertube due to the wear on the threads. This easy print…
Buy the module on Etsy --- Print it with 0.2mm layer height and a 0.4mm nozzle (or whatever works for you). No supports or brims are needed. The tolerances on this are tight. Depending on how tuned your printer is you might need to adjust…
Modeled to resemble an old fixed stock but still retains adjustability along the buffer tube. Fits the original xshot mpp battery and also has a secondary space for storage. Models are print oriented and require support. If you really…
A simple lamppost from a fictitious city in Europe or elsewhere. Scaled for 28mm wargaming for games like Bolt Action or Chain of Command. Print Settings Rafts: No Supports: No Resolution: .20 Infill: 10 Category: Buildings & Structures
Hello everyone! This is my remix of N8thin 's beautiful X-shot MPP Stock-ish Stock model. I loved the stylings and feel of their stock, but I wanted a version that was a little bit longer to fit me better. So, that's what I set out to…
These lens boards are designed to fit the MPP Micro-Technical Mk. VII (Mk. 7) and are based on an original MPP #1 board as a reference. Not sure about the lens board dimensions of earlier models, but I'm pretty sure the Mk. VI (6) has the…
Stock cosmetics were changed to look to be more in line with modern types of buffer stocks, my aim was to make it look a bit like standard AR15 stock. A small modification was made to the functional geometry. Channels for inserting M3 nut…
At only 60mm long, the Micro-Guard is guaranteed to be the smallest modular handguard available for the piston pump. Perfect for compact builds. Featuring a variety of options ranging from modular to a built-in quad rail. There is an…
The Fat Boy BCAR Shroud features an interchangeable design. Included are 5 different shrouds that friction fit on for easy swap. Also has a built-in clamp that keeps it secure around the bcar and barrel. Uses M3 hardware but isn't…
Support ventilateurs pour MPPT ou ORION Victron Energy. Ventilateurs diamètre 30mm.
Mounting plate for the MPPT 100|20 to mount it on existing holes for the lower-powered MPPT models (75|10, 75|15). Print it with PETG, as it may get too warm for PLA. You need to add 4x M3 threaded inserts.
Blendr compatible GoPro mount for CatEye AMPP lights. Use of Supports is recommended. It might be due to my tolerances, but the mount itself is quite tight and the mount on the light did not reach the end initially but moving is back and…
📄 Meshtastic Node Bracket for 150 × 100 × 70 mm IP67 Case ✅ Compatibility Case Fit: Specifically designed for the 150 × 100 × 70 mm IP67 enclosure from Aliexpress I recommand using as it is the go to case for outdoor applications. IP67…
I found that the xshot bcar was loose on some of my barrels so I quickly designed this to fix the issue. Model is print oriented and doesn't require support. Uses M3 hardware. *I only have pla+ at the moment so I am unsure if basic pla…
made to print on IDEX printer, this the one pictured was printed in pieces and glued
medium version of his hand guard.
I recommend printing this in PETG. Please turn support generation on - the only support generated is under the 3 small lids and in the 2 holes. They are very easy to separate.
Sample geometry to match the threading of the buffer tube since it's non-standard. The numbers on the end of each file are the clearances on the M29x1.5mm baseline; +0 is no clearance, +2 is .2mm oversized, -3 is .3mm undersized. Use the…
ITS AVERAGE!!!! - slightly longer barrel (230mm stock> 120mm >80mm 'micropp') and is an optimised and tested length with higher accuracy and MUCH less drop over ~10m . Probably best for 150fps cap games but don't have a chrono :/ * EDIT I…
The original part would fall out occasionally. I redesigned this to have a slightly tighter fit and added a feed ramp the front of the magwell entrance. You will need to remove the three screws in the XShot MPP magwell area to spread the…
Model includes body and cover. To connect them together you are going to need 3mm screws
This is a fairly simple remix. I wanted to put a Shellington Underbarrel Masterkey on my Xshot Motorized Piston Pump. The Masterkey needs a long segment of picatinny rail to mount to, and it pumps forward to prime so I wanted a shroud…
Adapter for the Comfee MPPHA-07CRN7 (or similar) mobile AC unit onto a 140mm standard hose. Best printed out of a temperature resistant filament (i used Nylon-CF; PC, PCBlend or ASA/ABS should also work). Includes an optional Anti-Warp…
A shorter barrel for the X-Shot Piston Pump. Designed for use with my BCAR and Handguard designs.
Collect is still accessible, and it locks the handguard in place, meaning no tools or other parts are needed. Other features include the free-floating design, front and rear Picatinny, and slim profile perfect for a C-clamp. I printed…
Modified Gemeneye's original Recon barrel recreation to mount on the front of an Xshot MPP. Used Ghost Manta's shroud as a base for the adapter and to add picatinny rail on top and bottom instead of the original N-strike rails to match…
This is a standoff created for the Victron MPPT 75/10 charge controller. It is designed to provide 30 mm of standoff behind the heat sink of the controller and mounting in an enclosure. The "plate" is the portion that attaches to the…
Multiple sizes available ranging from 1mm to 5mm. Great for those who wired in a smaller lipo. Stack together for custom sizes.
Have you ever wanted to use an N-Strike barrel as a shroud for your X-Shot Motorized Piston Pump? Now you can! All you’ll need is a pair of M3x6 screws. The included collet on the blaster clamps the attachment securely in place, while the…
Case for ZK-SJ20 Mppt Buck Boost Case Please note: I have changed screw terminals because I don't like the original ones! So this case may not fit to original screw terminals! Parts needed: 2x Screw terminal (RND 205-130-7.62-02P Data…
This is an enclosure for a popular ~10€ 5A solar panel controller which often is applied in USB charging applications. Nothing special again, just a q&d design to protect all the sensitive parts while leaving access to potentiometers and…
Print all of the original pieces for the Stock-ish stock, but only print one of the side mesh pieces. This replaces the other one. Top right corner of the cutout might not connect, but it doesn't really matter, you won't see it. Fits…
Just a 35mm wrench to get the castle nut nice and snug
This is a little hard to explain but here goes. This remix combines the basic shroud from Spyder's thing: https://www.printables.com/model/1379053-spyders-mpp-front-shroud-x-shot-aeb-motorized-pist with the top and bottom rails from…
Drop in mag release replacement for the X shot motorized piston pump. Has an extended paddle with a wider grip as well. Print as is, with support on bed only
U pdate : I made a Main Base with no Text, for you to feel free to edit yourself . Christmas Lamppost A traditional Christmas street lamp, standing 90 cm (35.43 inches) tall , designed in multiple parts for easy, support-free printing.…
The gadget carrier fits into Ventus 2 and Ventus ct variants of Schempp-Hirth sailplanes, where it successfully mounted. It will propably also fit into all Discus I and 2 models and maybe also into the the Ventus 3 models, because they…
This is a simple housing for the CN3791 MPPT solar controller (for 1S 18650 batteries). I needed a housing for a bare PCB that I ordered here: https://de.aliexpress.com/item/1005009014611437.html . The corresponding solar panel that fits…
Drain Hose Cover / Plug / Endcap for Comfee (e.g. Comfee MPPH-09CRN7)
Print one of each file and use m3 screws to hold them together.
Use two M4x12 button head fasteners to secure the rail to the handguard. Use two M4x40 socket cap fasteners to clamp the handguard to the blaster. Print with Arachne wall generation & supports.
Flared magwell attachment for the X-Shot MPP. Clicks directly into the existing magwell - no need to loosen screws or disassemble. 5 walls, 20% gyroid. Strongly recommend printing this in PLA+ 2.0, Tough PLA, PETG, or any material with…
A Magnus masterkey for the Xshot MPP, it is based on the geometry of my Retailator shroud remix. It most likely fits other blasters or shrouds with picatinny rail, but the rear filler piece may need adjusting. I used ScratchCampball's…
This is a remix of Trailblazers remix of the X-Shot Motorized Piston Pump barrel shroud. I adjusted the design a fair bit, removing the sling mount, separating the rail from the shroud, adjusting scaling on some areas, adding clamping…
I added an O-ring to the stock BCAR (Ok, “SCAR”) in the groove at the front. I think that's what it's there for. The cover then friction-fits over the stock BCAR. This is longer than the stock BCAR and will fit over and integrate well…
Inspired by GhostManta's Jam Door models, I wanted something that would replace the need to get a screw driver any time I needed to clear a jam. This is a drop-in replacement for the stock Jam Door, just take out the retaining screw and…
Mount for CatEye AMPP400 front light under Garmin.
Replacement spring rest for the motorized piston pump, if for some reason you lost yours. Or if your name is Isaac and you bought a “refurbished” MPP that was missing the spring rest, spring, and barrel, but were too lazy to return it but…
This is the Pumpprime Competition Addon for the ScarT Mk17 Blaster: Here is a little firing demo: Here is the assembly Guide:
A unique way to make the handguard standout and more public friendly. Unicorn version retains the front sight mount for the original iron sight. The dragon version uses the nose horn as a sight instead. Models are print oriented and will…
