14,491 models
Warning! The TS80 insert with large cable compartment was uploaded with the wrong dimensions. Don’t print it if you have downloaded it before 28/2/2023. A new version has been uploaded with the right dimensions. Design I've created my…
Print approx. €1.88–€2.30 excl. taxPreliminary estimate for one variant
Dimensions (LxWxH) 170 x 84 x 53 mm (100% scale) Basic information Great white sharks are definitely among the most fearsome and legendary ocean hunters, so it is not surprising, that everyone would love to have one in their collection.…
Print approx. €2.94–€3.59 excl. taxPreliminary estimate for one variant
Variation of other multimeter probes with focus on removing support requirements and easy slotting of probes. Two versions, for two most common diameter probes. Print in PETG for maximum usability.
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for PETGSource material: PET
Author: Cipis https://www.prusaprinters.org/social/18/prints 2-color Remix for multi-material printers. Print takes roughly 2 hours and 40 minutes at 200 µm layer height with 2 materials (Ext. 1 – Blue, Ext. 2 – Silver) . Original model:…
Print approx. €1.34–€1.64 excl. taxPreliminary estimate for one variant
A small, strong case with a collection of optional inserts for different uses. Case Use a section of 1.75mm filament inside the hinge to connect the lid to the base. Depending on your printer/setup, this hole maybe be on the tight side or…
Print approx. €0.86–€1.06 excl. taxPreliminary estimate for one variant
The multi-material Prusa MMU3 test objects are useful to quickly test the reliability of the material changes during printing. These simple objects can be printed using different materials and colors, allowing users to test how well the…
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
Articulated limbs Multicolor support Added coloring on the nostrils and mouth, giving it a bit of a smile
Print approx. €4.32–€5.28 excl. taxPreliminary estimate for PETGSource material: PET
This is a Modular and multi-size tape dispenser. I first designed this as a single size (3/4in) non modular dispenser, held together with screws. The comment I got the most was : were are the other sizes? I refined the design, corrected a…
Print approx. €1.02–€1.25 excl. taxPreliminary estimate for one variant
The Benchbin is as a 3D Printing torture test designed to benchmark the quality, speed and waste of various multi-color 3D printing systems. It can be printed completely without any supports or brim, with the lid and the wheels being a…
Print approx. €12.88–€15.74 excl. taxPreliminary estimate for one variant
This innovative junction box is fully compatible with the WAGO 221 series and supports all connector models, including the 221-412, 221-413, and 221-415. Designed for maximum flexibility, the rail-based approach allows you to mix and…
Print approx. €7.95–€9.71 excl. taxPreliminary estimate for PETGSource material: PET
This is my take on my own award winning Flexi Sloth design as a multi material print. There is a pre-painted .3mf file and an .stl file. I also made a pre sliced print file for MK3S+ with an MMU. I will add a file of only the face so you…
Print approx. €2.69–€3.28 excl. taxPreliminary estimate for one variant
🆕 17.08.2025 A stronger clamp has been added to the Basic set. 🆕 28.02.2025 new parts ⬇ All parts can be rotated by 22.5°. Arm The arms are available in 5 lengths: 50, 75, 100, 150 and 200 mm . Each arm has a connection with a hole on one…
Print approx. €9.42–€11.52 excl. taxPreliminary estimate for one variant
Author: Cipis https://www.prusaprinters.org/social/18/prints 3-color remix Remix for multi-material printers. Print takes roughly 3 hours and 40 minutes at 200 µm layer height with 3 materials (Ext. 1 – Green, Ext. 2 – Blue, Ext. 3 –…
Print approx. €2.84–€3.47 excl. taxPreliminary estimate for one variant
if you like this kind of stuff consider supporting me on my Patreon www.patreon.com/wekster
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
This is an anatomically correct human heart. It is created as a multi material version: The heart's Ateries, Atrium, Valve, Ventricle, Papillary and Veins are a seperate file, so you can print a fancy multicolor heart ;) The Ventricle has…
Print approx. €13.84–€16.92 excl. taxPreliminary estimate for one variant
My kids wanted mini Minecraft tools. The easy answer would be to print the fantastic models by GSAMakerspace on Thingiverse (10 years ago!), but ~~I have an XL and I wanted them in color~~ my kids demanded diamond variants. My next…
Print approx. €5.77–€7.05 excl. taxPreliminary estimate for one variant
This is a remix of the popular Multimeter (DMM) Probe Tweezer made by QED_Maestro. Description This model provides a convenient way to hold both of your DMM probes with one hand. The upgraded secure holders prevent the probes from falling…
Print approx. €0.53–€0.65 excl. taxPreliminary estimate for one variant
Smoothly operating and very sturdy sliding barrel bolt lock thanks to the great original design by Jerry Lee With added “locked open” position and full FDM print optimized handle with threads, removing the need for glue. Update: per user…
Print approx. €1.21–€1.48 excl. taxPreliminary estimate for PETGSource material: PET
Hi! This collection of Root 3D buildings and tokens was put together by myself in order to have a nice print-at-home alternative to the popular MeepleSource Root pieces . Almost very single piece in this collection is set to be able to be…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
This is a holder for the extra bits that can be ordered for the LTT screwdriver. 12, 24, 36, 48 and 60 bit versions. The outer case is a single print with a print in place hinge. The inner bit holder part is meant to be print with…
Print approx. €5.87–€7.18 excl. taxPreliminary estimate for one variant
Subscribe to find out more support free 4K Time-lapse video: Subscribe Now! http://www.youtube.com/iczfirz Very beautiful Deadpool from Eastman. Got his permission to release this MMU remix version. Sliced with PrusaSlicer and timelapsed.…
Print approx. €59.66–€72.91 excl. taxPreliminary estimate for one variant
360° Spinning Adapter for the Multifunction Arm Mounting System What you need Multifunction Arm mounting system (Small Arm System) Big Clamp For Small Arms This Spinning Adapter Side small-NUT-M3.stl (1x) screw-small.stl (1x) Hardware…
Print approx. €1.28–€1.56 excl. taxPreliminary estimate for one variant
The ideal third arm for your workshop or office. Much more than just a tool. This is the multifunction and electrified tool holder. Light, extraction fan, pliers, vices, phone charger/holder, ... a large number of electrical or mechanical…
Print approx. €1.52–€1.86 excl. taxPreliminary estimate for PETGSource material: PET
After printing both the amazingly designed Cascade card wallet (Print-in-place) from Hugo and the remix for multiple parts (Assemble after Print - Cascade Card Wallet Remix) by 815 Design , I wanted to join in by creating a design for 8…
Print approx. €0.65–€0.80 excl. taxPreliminary estimate for one variant
BOM: Printed with ROSA3D High Speed PLA Signal Violet This tool converts two standard multimeter probes into a pair of testing tweezers , letting you measure components and contacts with one hand . Ideal for SMD parts, tight spaces, or…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
Scaled to 300%. Easy assembly. If you want, you can add glue to the eyes.
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
4 handle sizes, perfect for your DIY projects
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for PETGSource material: PET
This is a multimaterial remix of Articulated Christmas Toys by bq3D ( https://www.thingiverse.com/thing:1168292 ) These are relatively easy prints that print in place without support. If your first layer adhesion is a little low, a brim…
Print approx. €18.45–€22.55 excl. taxPreliminary estimate for one variant
This model is a remix of popular model of battery storage from CAD-Guy . Thanks to this modification you can use each of the beer crate for combination of AA, AAA, 9V and CR2032 batteries (not specifically 1 crate for only 1 type of…
Print approx. €4.18–€5.11 excl. taxPreliminary estimate for one variant
Author: Dominik Cisar https://www.prusaprinters.org/social/7/prints The Man. The myth. The legend. Little Josef Prusa Character, designed at the occasion of the Original Prusa MULTI MATERIAL UPGRADE 2.0 release. The model consists of…
Print approx. €11.48–€14.03 excl. taxPreliminary estimate for one variant
THIS HAS NOT BEEN TESTED ON A HUMAN Let's be clear: if you print this and use this on a patient, that is your responsibility. I make no representations as to the safety of this device. It's an experimental model designed to stimulate…
Print approx. €5.17–€6.32 excl. taxPreliminary estimate for one variant
Don't want to read all of this? There's now a tl;dr at the bottom of this document. Important Note Regarding Input Shaper: Before printing please see the Input Shaper section below for important notes regarding potential issues with input…
Print approx. €3.09–€3.77 excl. taxPreliminary estimate for PETGSource material: PET
When I didn't find hooks in sizes I needed I created a set of hooks in the following sizes: 20, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 85, 90, 95 and 100mm. The hooks are click hooks. Recommended print settings (same as…
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant
The Desk Headphones Hanger is a handy accessory that allows you to keep your headphones organized and within easy reach. This model is designed to be mounted to a horizontal desk up to 22 mm thick . It features a simple and elegant design…
Print approx. €0.43–€0.52 excl. taxPreliminary estimate for one variant
Change the plastic after a pause or with the help of a plug-in in the slicer.
Print approx. €2.76–€3.37 excl. taxPreliminary estimate for one variant
This is the V2 version of my ergonomic multi size bottle opener, a stronger, more robust redesign made for users who prefer extra durability and stability. Compared to the previous version, this model is reinforced, making it less…
Print approx. €2.15–€2.63 excl. taxPreliminary estimate for one variant
Info: for those who likes it REALLY long more info about print at long millipede print introduced spiral curve, so it can be much longer added also variant for Prusa MINI 200 vertebras print is in the end about 117cm long. Lengths: 200 or…
Print approx. €12.16–€14.86 excl. taxPreliminary estimate for one variant
Click connector plate for attaching power supply units or power strips to Multiboard with cable ties. (Matching the “Underware” cable management system from HandsOnKatie.)
Print approx. €1.41–€1.72 excl. taxPreliminary estimate for one variant
Let's do multicolour now. Spider-Man 5 colours with MMU2S. Print at least 150mm height. Gcode spidermanps4advancedsuit-mc-basered_icz_02mm_pla_mk3smmu2s_2d7h43m.gcode provided by Ceji3D https://www.instagram.com/ceji3d/ Gcode for 2x…
Print approx. €47.06–€57.52 excl. taxPreliminary estimate for one variant
Multiboard bottle holders with open bottom in sizes from 25mm to 120mm. The bottle holders uses the flexible MultiConnect connector. Just attach MultiConnect connectors to your board and then mount the bottle holder on these connection…
Print approx. €0.89–€1.09 excl. taxPreliminary estimate for one variant
Dremel 3000 table saw. 2 main parts, the base where the Dremel is fixed in by means of a quick tension bracket and the table saw with accessories. In the design I have deliberately opted for an easy-to-stop bracket in which the Dremel is…
Print approx. €1.71–€2.09 excl. taxPreliminary estimate for one variant
multicolour hummingbird. printed on Prusa mk2.5s mmu2s. remixed from https://www.thingiverse.com/thing:3307572 Print instructions print with up to 4 colours and support material, soluble support if you have any. black in extruder 1 green…
Print approx. €37.21–€45.48 excl. taxPreliminary estimate for one variant
this baby yoda vomit toothpaste cap is a remix frrom https://cults3d.com/es/modelo-3d/artilugios/baby-yoda-pasta-dientes-thootpaste#_=_ but painted and laminated in prusaslicer and MMU2 Ready. The Gcode and the 3mf are uploaded.
Print approx. €1.52–€1.86 excl. taxPreliminary estimate for one variant
This practical keychain is an essential accessory for those who love to be always prepared. It transforms into a screwdriver when needed. Inside, you can insert two interchangeable tips: one flat and one cross, each 25 mm long, perfect…
Print approx. €1.21–€1.48 excl. taxPreliminary estimate for PETGSource material: PET
*April 23, 2025 update: - added ‘case-front-cutout-thin.3mf’. It's the same as 'case-front-cutout' but has a thinner face, so the numbers can be easily seen from a steeper angle. I wanted a counter that went higher than 9, so I made this…
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
YAPH?! (yet another phone holder?!) I needed a phone holder in my car to better read traffic information. This is what I came up with. Mostly as a design challenge since I just started printing, but works pretty well if I may say so. Why…
Print approx. €2.69–€3.29 excl. taxPreliminary estimate for one variant
11 in 1 - Workshop Multipurpose Tool Features : Scale - 55mm Screw / Bolt Length Gauge M series - Bolt Size Gauge - 1 / 2 / 2.5 / 3 / 4 / 5 Screwdriver + Bit Holder (BIG) Screwdriver + Bit Holder (small) Allen Key Size Gauge + handle…
Print approx. €0.76–€0.93 excl. taxPreliminary estimate for one variant
This is a simple model designed to test the Prusa MMU3. It uses all 5 filaments to create a palette identifying each spool by its number. Its definitely not the prettiest model you will print with your MMU3, but it is certainly useful to…
Print approx. €0.83–€1.02 excl. taxPreliminary estimate for one variant
➡️ Check out also mega long millipede Info: for those who likes it long in original from @Loubie3D (thanks for the model!) is only 1 length of the centipede/millipede/catterprillar (the other is just a scaled variation, with the same 17…
Print approx. €1.55–€1.90 excl. taxPreliminary estimate for one variant
Print it on the MMU2S.
Print approx. €18.59–€22.72 excl. taxPreliminary estimate for one variant
This is a Flow Rate Calibration Test specifically designed for PrusaSlicer , as it does not support per-object settings. These models are optimized to use as little filament as possible while still providing accurate results. There are…
Print approx. €0.44–€0.53 excl. taxPreliminary estimate for one variant
Summary Do you love Benchys but are frustrated because they don't float in water? Do you want to print your child a cool Benchy for the bathtub? Here is the stable floating Benchy with cargo containers, smoke and flag in a multicolor…
Print approx. €1.66–€2.02 excl. taxPreliminary estimate for PETGSource material: PET
The model where I stacked the layers on top of each other. It is thus possible to print each layer in one color and to print the entire model more simply. Remixed from:…
Print approx. €3.62–€4.42 excl. taxPreliminary estimate for one variant
This is a very simple tool to help you drill a hole square/perpendicular to a surface. It really doesn't get any simpler than this, an angle with a v-groove on 2 sides. No need to press it hard against your drill, just press it to your…
Print approx. €1.18–€1.45 excl. taxPreliminary estimate for one variant
180° Tablet Holder Hinge for the Multifunction Arm Mounting System (Small Arm System) What you need Printed parts Multifunction Arm mounting system (Small Arm System) Multifunction Arm mounting system Spinning Adapter Big Clamp For Small…
Print approx. €3.00–€3.66 excl. taxPreliminary estimate for one variant
Smart holder adaptér !!!POZOR - pouze pro Colorprint!!! držák vychází z originálu, který byl modifikován pro sportovní sedadla vozidel značky Škoda, včetně pojistky proti vyndaní pokud je vložen držák multimédií ;) postup: vložit model a…
Print approx. €5.10–€6.23 excl. taxPreliminary estimate for PETGSource material: PET
2d multimaterial rainbow u can paint it or print multimaterial
Print approx. €3.98–€4.86 excl. taxPreliminary estimate for one variant
Don't forget to like this model. Pre-sliced gcode by ryanL You can check his made in the comment session. Multicolour pose. Category: Sculptures
Print approx. €40.81–€49.88 excl. taxPreliminary estimate for one variant
MultiMaterial version MMU remix from: https://www.thingiverse.com/thing:246198 Print instructions E1 Yellow E2 Black E3 Orange E4 Red
Print approx. €43.69–€53.40 excl. taxPreliminary estimate for one variant
This filament buffer is placed between filament spool holders and Multi Material Upgrade for Original P313 MK3/S. Prevents tangling of returning filaments during color changes in multicolor prints. It can be placed on a table or mounted…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for PETGSource material: PET
The Bookshelf Mountable Headphones Hanger is a handy accessory that allows you to keep your headphones organized and within easy reach. This model is designed to be mounted to a bookshelfs vertical stands ranging from 18 mm thick up to…
Print approx. €0.43–€0.52 excl. taxPreliminary estimate for one variant
Now supports Mosaic Canvas!!! During MultiColor 3D printing the default way of purging the old color during transition between colors is to use a purge block or wipe tower. The main problems with purge blocks are that they must be printed…
Print approx. €2.33–€2.85 excl. taxPreliminary estimate for one variant
Yet another head for soozafone's fantastic LUCKY 13 model! This is just some modifications/improvements to BaGooN's also-great rabbit ears head. (Personally, I think it looks like a robot, but maybe that's just because I like robots.) I…
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for PETGSource material: PET
Hello, Welcome to my profile, full of models and miniatures :-) I have for you a Holder for food plastic bags several at once. It prints really well. It is necessary to use supports! If you are interested in my work, the links are here:…
Print approx. €1.58–€1.93 excl. taxPreliminary estimate for one variant
24 August 24 - Working on a new version! If you're planning on printing these and this message is still here, please message me so I can make the newest model available to you. Will get them up here as quickly as I can. New Model Added! 1…
Print approx. €3.57–€4.36 excl. taxPreliminary estimate for PETGSource material: PET
Zootopia badge for a Halloween costume Made by yours truly and I've included the SolidWorks model if you want to change it up :) Print at 0.1mm and do a layer change at 0.60mm and 2.10mm Start with a blue filament then gold
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant
Hi guys <(^^ )> ---------------------------------------------------------------------------------------------------------------- Vous aurez besoin de 4 couleur. L'AMS n'est pas nécessaire pour cette impression. 18 min d'impression. I love…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
This is a 3mf file created in PrusaSlicer to add multiple colors to the front of the mini Y plate. There is an option of 2 different colors for the text. This was printed on my MMU2s unit. Please make sure to lower the speed of the first…
Print approx. €6.08–€7.43 excl. taxPreliminary estimate for PETGSource material: PET
This little beast is completely functional and complete overkill for a Ukulele! The extended scale length for the lower strings makes for improved tuning stability even at lower tunings without the need for heavier strings, meaning this…
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant
A simple remix into a “coin” shape of Ceji3D 's Demon Slayer visualizer model. The model has been scaled up in size from the original, and the text/elements rearranged within so that they stack on top of the "coin" to allow multicolor…
Print approx. €1.25–€1.53 excl. taxPreliminary estimate for one variant
This clamp will hold a table cloth in place. Tie a knot in two trash bags and hang them in the slot for recyclables and rubbish. Or use the slot as a place for dish clothes (they may also need a knot). Tie rope or paracord for one end of…
Print approx. €5.58–€6.82 excl. taxPreliminary estimate for PETGSource material: PET
This is a drawer organizer for Nespresso Vertuo pods inspired by the $20 ones you can find on Amazon. However, unlike those, you can customize this to exactly fit your drawer: just update the code with your drawer dimensions and generate…
Print approx. €8.25–€10.08 excl. taxPreliminary estimate for one variant
Enlarged and modified version of @BobMcGlobus_870140 click connector plate for attaching power supply units or power strips to Multiboard with cable ties. (Matching the “Underware” cable management system from HandsOnKatie.) The original…
Print approx. €0.97–€1.18 excl. taxPreliminary estimate for one variant
The Prusa mini K Factor / Linear Advance is well calibrated for stock. If you have changed your extruder / hotend you might need to calibrate the Linear Advance. This fixes issues where it is blobbing like over extrusion on edges yet when…
Print approx. €0.05–€0.07 excl. taxPreliminary estimate for PETGSource material: PET
Christmas Countdown! Follow Us! To get reminded about our free holiday models (like this one!) we are going to release regularly until Christmas 2022 ! Christmas Stocking Earrings or Ornament The print is scaled to be an earring and can…
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant
I did another experiment with TPU/PLA Multi-Material printing. I changed the interface section in a way that over a configurable number of layers the 2 materials get kind of "woven" (per layer) to each other (see pic of interface…
Print approx. €1.22–€1.49 excl. taxPreliminary estimate for one variant
Multipurpose Holder USB-A - 6x USB-C - 8x HDMI Type D (aka Micro-HDMI) - 2x SD Card - 8x MicroSD / NanoSIM - 4x horizontal & 5x frontal Print instructions Successfully printed using the Prusament PLA Prusa Galaxy Black. Printer: Prusa…
Print approx. €5.09–€6.22 excl. taxPreliminary estimate for one variant
EDIT 1: (Featured in the Prusa YouTube video about 3MF files!) EDIT 2: (Also featured in Weekly 3D Prints #47!!!) This serves as a sequel to my recently-published Castle Tower. I began an introductory course with Autodesk Maya and decided…
Print approx. €12.03–€14.70 excl. taxPreliminary estimate for one variant
Printed at 0.3mm layer height on a MK3s and MMU2 with 3DQF PLA filament. I used support on build plate just for the fixings on the back but probably not necessary.
Print approx. €11.68–€14.28 excl. taxPreliminary estimate for one variant
Cable Clip for the Multifunction (Small) Arm mounting system Features Fits on the “ arm-small-hex-honeycomb-wall-compatible ” Fits 4.50mm diameter cables
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
expandable SD card storage for SD, Mini and Micro. This model is compatible with my Nozzle Storage as well "Nozzle Storage - Multiple Layer - V6". The Premade G-Code is at set matching the pictures. Print instructions Models There are 3…
Print approx. €10.47–€12.80 excl. taxPreliminary estimate for one variant
The footprint has been made as little as possible to avoid marks in your newly painted objects. Therefor, they are well suited for stacking multiple painted objects on a small working area. Stackable for easy storage Red (Big) :…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
This was created from the original Prusa file. Image 1: Carmine Red on Galaxy Black Image 2: Galaxy Black on Prusa Orange Image 3: Ultramarine Blue on Prusa Orange Image 4: Prusa Orange on Jet Black EDIT: I added 2 additional models plus…
Print approx. €0.21–€0.25 excl. taxPreliminary estimate for PETGSource material: PET
Print in whatever filament you want. Print with two different colors of own choice. (color change is implemented in the premade G-Code, so when the printer beeps just follow the instructions) The color will vary depending on the…
Print approx. €0.72–€0.88 excl. taxPreliminary estimate for one variant
Strong and easy to print corner brackets. Printing tips Use stronger materials such as ASA 275, PETG or Modified PLA (e.g. Strongman) Set infill to 20% Print without supports Suggested resolution is 0.2mm Variants Small - 25mm Three…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
Use it to make a pendant, earrings or whatever you want. You can scale it down at 70% without issues. Size : 42mm x 37mm x 2mm Print Settings : Nozzle 0.4mm Layer height 0.15mm
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant
Subscribe to find out more support free 4K Time-lapse video: Subscribe Now! http://www.youtube.com/iczfirz Addiction to 3D Printing? Watch these time-lapse! https://youtu.be/-ZsXFX6hjXk https://youtu.be/3zdRgYUHfvU…
Print approx. €10.04–€12.27 excl. taxPreliminary estimate for one variant
Tablet Holder for the Multifunction (Small) Arm mounting system Features Fits tablet-holder-small-[L, R] Fits a Galaxy Tab A8 Change Log 2025-01-01 Added the Step file as requested by @Ferrugius
Print approx. €0.68–€0.83 excl. taxPreliminary estimate for one variant
This is rework of Counter with Auto-rollover . All wheels are printed in one piece and numbers are created as pockets instead of pads. This makes it easy to be printed flat and in dual colour. Both used libraries Parametric Geneva…
Print approx. €1.78–€2.17 excl. taxPreliminary estimate for one variant
I Remixed The Model for faster print less trash and user without MMU or any other Multicolor Setup
Print approx. €7.39–€9.04 excl. taxPreliminary estimate for one variant
I was informed my previous version https://www.printables.com/model/728282-ergonomic-grip-for-miyoo-mini-plus-multipart-for-m was too big for some smaller hands so I crated this version (and a stand to go with it). Print with brim and…
Print approx. €5.91–€7.22 excl. taxPreliminary estimate for one variant
IFA Multicar logo and emblem in correct size. for one extruder two colors (to 1,8mm white, from 1,8mm black) ironing on Addapted and resized models from Thingiverse: https://www.thingiverse.com/thing:2092314…
Print approx. €2.99–€3.65 excl. taxPreliminary estimate for one variant
The multi-material version of Darth Vader recorder flute, inspired by Darth Vader's lightsaber from Star Wars movies. Print instructions E1: black E2: silver E3: red STL:…
Print approx. €11.94–€14.60 excl. taxPreliminary estimate for one variant
Changing colors between layers is a known and easy to use feature in Prusaslicer. If you want to change filament within one layer you usually need the MMU. But with virtual extruders and some prearrangements in the model and slicer, this…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
These files are prepared as a four color print for use on the Prusa XL or other multicolor printer.
Print approx. €15.57–€19.03 excl. taxPreliminary estimate for PETGSource material: PET
I've always loved little tools and key fobs. Made this one day and thought it was pretty cool :) Tool is about 8.9 cm X 2.4 cm. Please tell me if it works well for you in the comments :) Tool list: pry bar, wire stripper, nail remover,…
Print approx. €0.93–€1.14 excl. taxPreliminary estimate for one variant
Multiboard connector for items with mounting points for regular screws. Can for instance be used to connect Ryobi chargers to Multiboard. Recommended print settings (same as Multiboard defaults): 3 wall perimeters in wall thickness 15%…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
A headphone hook for 1.5" (38.1 mm) drum rack tubing (common size of Roland e-drum racks). You can choose between two designs ("Headphones" labeI in writing or a simple icon). It clamps onto the tubing using two M6 bolts. UPDATE: Added…
Print approx. €5.22–€6.38 excl. taxPreliminary estimate for one variant
Don't forget to like this model and sub my YouTube channel. Category: Sculptures
Print approx. €46.27–€56.55 excl. taxPreliminary estimate for one variant
Split to two parts so it can be printed on my Prusa Mini+. I've used Prusament PLA with default 0.2 QUALITY settings with supports. It was my second Fusion360 model, so appologies for not the best parametric source file. Stand is…
Print approx. €7.02–€8.58 excl. taxPreliminary estimate for one variant
![Desk Headphones Hook [Easy to Print] [Multiple Variants] / Clamp / Holder / Hanger](https://media.printables.com/media/prints/664262/images/5232779_79e6456f-825b-420c-b549-25ccaeddc536_e9b42033-6509-4546-87ec-a2d2b3b002b1/dsc_3556.jpg)
![Vertical Headphones Hanger / Clamp [Kallax] [Easy to Print] [Multiple Variants] / Holder / Hook](https://media.printables.com/media/prints/663848/images/9073575_3e0a47ae-93d3-4674-baa9-523682eaa44c_2ecbe634-d193-4580-af2c-590abfc9a03b/headphone-clamp-v23-32-ext.png)
![Multipurpose Holder [USB-A, USB-C, HDMI Type D, SD, MicroSD]](https://media.printables.com/media/prints/31807/images/313387_b0da4114-99ad-4cdc-b60e-9467a88a80c6/multipurpose_holder_2020-may-16_09-19-05pm-000_cu.png)
