Counting matching models…
Basic case for Arduino Leonardo with USB Host Shield built using YAPP-Box in OpenSCAD. Only the USB ports are exposed, but headers could be easily exposed with an additional opening in the .scad config. External push point for the reset…
Print approx. €1.72–€2.10 excl. taxPreliminary estimate for one variant
A Saint Bernard.
Print approx. €3.63–€4.43 excl. taxPreliminary estimate for one variant
Leonardo AW139 Helicoper Angle Wall Art Silhouette Model. Adjustable size. I accept model suggestions.
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant
Wikipedia: A Pinard horn is a tool used to listen the heart rate of a fetus during pregnancy. This is my second attempt (the first one was bigger and didn't work) and this is fully functional although some times it's hard to find the…
Print approx. €3.41–€4.16 excl. taxPreliminary estimate for PETGSource material: PET
Leonardo AW139 Helicoper Wall Art Silhouette Model. Adjustable size. I accept model suggestions.
Zahnrad mit 80 Zähnen für den Antrieb des Vorschubgetriebes an der Drehmaschine Bernardo P600G. Das Zahnrad wird anstelle des originalen Zahnrades mit 32 beziehungsweise 64 Zähnen montiert. Hebelstellungen und Gewindesteigungen sind aus…
Print approx. €1.61–€1.97 excl. taxPreliminary estimate for one variant
Zahnrad mit 38 Zähnen für den Antrieb des Vorschubgetriebes an der Drehmaschine Bernardo P600G. Das Zahnrad wird anstelle des originalen Zahnrades mit 32 beziehungsweise 64 Zähnen montiert. Hebelstellungen und Gewindesteigungen sind aus…
Print approx. €0.49–€0.59 excl. taxPreliminary estimate for one variant
Zahnrad mit 36 Zähnen für den Antrieb des Vorschubgetriebes an der Drehmaschine Bernardo P600G. Das Zahnrad wird anstelle des originalen Zahnrades mit 32 beziehungsweise 64 Zähnen montiert. Hebelstellungen und Gewindesteigungen sind aus…
Print approx. €0.41–€0.51 excl. taxPreliminary estimate for one variant
Zahnrad mit 58 Zähnen für den Antrieb des Vorschubgetriebes an der Drehmaschine Bernardo P600G. Das Zahnrad wird anstelle des originalen Zahnrades mit 32 beziehungsweise 64 Zähnen montiert. Hebelstellungen und Gewindesteigungen sind aus…
Print approx. €0.90–€1.10 excl. taxPreliminary estimate for one variant
Zahnrad mit 44 Zähnen für den Antrieb des Vorschubgetriebes an der Drehmaschine Bernardo P600G. Das Zahnrad wird anstelle des originalen Zahnrades mit 32 beziehungsweise 64 Zähnen montiert. Hebelstellungen und Gewindesteigungen sind aus…
Print approx. €0.56–€0.69 excl. taxPreliminary estimate for one variant
Le Sombo Canard de bain Grey Star est une merveille fantastique venue de l'espace. Avec son design inspiré des étoiles grises, ce canard en caoutchouc apporte une touche de fantaisie galactique à l'heure du bain. Il est parfait pour les…
Print approx. €1.74–€2.12 excl. taxPreliminary estimate for one variant
Abgewinkelter Trichter für das Vorschubgetriebe der Bernardo P600G. Ein O-Ring mit Innendurchmesser 17 mm und Schnurstärke 2,5 mm ist nicht unbedingt notwendig, hält den Trichter aber besser im Einfülloch bzw dichtet dieses ab. Ich habe…
Zahnrad mit 54 Zähnen für den Antrieb des Vorschubgetriebes an der Drehmaschine Bernardo P600G. Das Zahnrad wird anstelle des originalen Zahnrades mit 32 beziehungsweise 64 Zähnen montiert. Hebelstellungen und Gewindesteigungen sind aus…
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for one variant
Ležící bernardýn na památku
Print approx. €8.43–€10.31 excl. taxPreliminary estimate for one variant
Zahnrad mit 52 Zähnen für den Antrieb des Vorschubgetriebes an der Drehmaschine Bernardo P600G. Das Zahnrad wird anstelle des originalen Zahnrades mit 32 beziehungsweise 64 Zähnen montiert. Hebelstellungen und Gewindesteigungen sind aus…
Print approx. €0.78–€0.95 excl. taxPreliminary estimate for one variant
Zahnrad mit 62 Zähnen für den Antrieb des Vorschubgetriebes an der Drehmaschine Bernardo P600G. Das Zahnrad wird anstelle des originalen Zahnrades mit 32 beziehungsweise 64 Zähnen montiert. Hebelstellungen und Gewindesteigungen sind aus…
Print approx. €1.02–€1.25 excl. taxPreliminary estimate for one variant
Zahnrad mit 72 Zähnen für den Antrieb des Vorschubgetriebes an der Drehmaschine Bernardo P600G. Das Zahnrad wird anstelle des originalen Zahnrades mit 32 beziehungsweise 64 Zähnen montiert. Hebelstellungen und Gewindesteigungen sind aus…
Print approx. €1.32–€1.62 excl. taxPreliminary estimate for one variant
Bernardelli Model 80 Mag Base
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for PETGSource material: PET
Zahnrad mit 76 Zähnen für den Antrieb des Vorschubgetriebes an der Drehmaschine Bernardo P600G. Das Zahnrad wird anstelle des originalen Zahnrades mit 32 beziehungsweise 64 Zähnen montiert. Hebelstellungen und Gewindesteigungen sind aus…
Print approx. €1.48–€1.81 excl. taxPreliminary estimate for one variant
Fits the plastic racking from Menards that has the sort of V shaped notch. Works great for drying gloves, hats, etc.
Print approx. €0.48–€0.58 excl. taxPreliminary estimate for one variant
Zahnrad mit 66 Zähnen für den Antrieb des Vorschubgetriebes an der Drehmaschine Bernardo P600G. Das Zahnrad wird anstelle des originalen Zahnrades mit 32 beziehungsweise 64 Zähnen montiert. Hebelstellungen und Gewindesteigungen sind aus…
Print approx. €1.14–€1.40 excl. taxPreliminary estimate for one variant
PROBLEM 1: Many people know Bernardeau candlelight holders, those beautiful votives. I also own one of them, but my wife was tired of changing candles and remembering to light them. So I decided to make it easy for her, of course, with a…
Print approx. €0.52–€0.64 excl. taxPreliminary estimate for one variant
Zahnrad mit 68 Zähnen für den Antrieb des Vorschubgetriebes an der Drehmaschine Bernardo P600G. Das Zahnrad wird anstelle des originalen Zahnrades mit 32 beziehungsweise 64 Zähnen montiert. Hebelstellungen und Gewindesteigungen sind aus…
Print approx. €1.20–€1.47 excl. taxPreliminary estimate for one variant
Zahnrad mit 74 Zähnen für den Antrieb des Vorschubgetriebes an der Drehmaschine Bernardo P600G. Das Zahnrad wird anstelle des originalen Zahnrades mit 32 beziehungsweise 64 Zähnen montiert. Hebelstellungen und Gewindesteigungen sind aus…
Print approx. €1.40–€1.71 excl. taxPreliminary estimate for one variant
Bernard Buffet (1928-1999) Asnières Painted in 1986 See the original painting here Start with White, then go Black. 2 colors/ 1 change total. Link to all multicolor art:…
Print approx. €4.44–€5.43 excl. taxPreliminary estimate for one variant
Model sedícího bernardýna.
Print approx. €3.38–€4.13 excl. taxPreliminary estimate for one variant
Zahnrad mit 78 Zähnen für den Antrieb des Vorschubgetriebes an der Drehmaschine Bernardo P600G. Das Zahnrad wird anstelle des originalen Zahnrades mit 32 beziehungsweise 64 Zähnen montiert. Hebelstellungen und Gewindesteigungen sind aus…
Print approx. €1.53–€1.86 excl. taxPreliminary estimate for one variant
Bernard Buffet (1928-1999) Asnières Painted in 1986 See the original painting here Recommended color order- Light blue - Dark Gray - Red - Green - Yellow - Black Link to all multicolor art:…
Print approx. €6.22–€7.60 excl. taxPreliminary estimate for one variant
I've been wanting a good way to store my IC puller and recently found gridfinity. Based on ESliva15's freecad template.
Print approx. €1.07–€1.31 excl. taxPreliminary estimate for one variant
LEONARDO TMNT REMIX
Catapult inspired by Leonardo da Vinci, more powerful than a simple desk toy, roughly 110mm tall (frame) Easily printed within 24 hours, have fun! Be sure to upload photos of yours when its complete! Id love to be able to include them in…
the propeller should spin the model needs to be glued together the helicopter very realistic need to use a support
Thank you for downloads, likes… Enjoy !
I have changed the "bucket" to be wider for bigger "projectiles" and added a thumb wheel of easy range adjustment. But the bigger redesign is the fulcrum. I split it into two parts to be printed easier. Now the hole for the axle goes now…
Being the father of all makers, I really wanted a nice bust of Leonardo da Vinci. So I spend some time putting together two busts I found of him. I used Blender to do that. I just finished painting him and like the other busts I have…
These canards were designed and oriented with inspiration from other functional designs for sale. The canards were designed to be printed standing up on the narrow end. It's not the easiest print because of this, but I didn't want the…
Leonardo DaVinci cam power hammer This time I went back a bit to history, I like mechanical models and I was interested in this one. It can serve as an illustration of an invention from the past created by one of the greatest inventors -…
I found a nice bust of Leonardo Da Vinci and edited it a bit. It had some noise elements so deleted that, I remeshed and sculpted the mesh a bit and made a flat base. Source file:…
boucle d’oreille faisant 5 cm de hauteur, épaisseur dans le fichier de 3 mm, mais peu être descendu à 2 mm selon le résultat souhaité
Glissonardo – From Leonardo’s Idea to a New Instrument https://youtube.com/shorts/NSQ5zJAe3m4?si=dutGs6VnRXYoO4sk Glissonardo is inspired by Leonardo da Vinci’s Codex Atlanticus , where sketches of so-called fissura flutes show an early…
As requested by @corporalbon_996018 , here is a 500% scaled up version of Leonardo, cut up into pieces that easily fit on a Bambu Lab P/X series (and should fit on 220m build plates too). Note that I had some issues with the dowels not…
Eine kleine Krippe, modelliert in Anlehnung an das alte Ulrich Bernardi Krippenhaus von ANRI . Die Höhe beträgt etwa 54 mm. Die Montageabstände sind auf 0.2 mm eingestellt, so dass auch Drucke aus nicht korrekt kalibrierten Druckern…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Mon personnage a cet air joyeusement blasé car j'ai voulu modéliser un chat (et les chats sont des gros blasés, on le sait tous ! ) Bon il ressemblait plutôt à un renard donc après quelques modifications, mon chat ressemble finalement à…
Lot de bague à canard de différents calibre (7,8,9,10,20)
you wil need to print part1 10 times and part2 5 times to get a full bridge it is up to you how big you wil print it!! you can print the box to store the pieces in. the letters can be print in multi color with one nozzle
Print in PLA or PETG with supports. Be extra careful when removing the supports from the mask, as it is thin and could break with enough rough handling. I recommend organic supports for this model. Please add a make if possible! :)
TMNT set Fortnite (Donatello, Michelangelo, Raphael,Leonardo)
A cask like you'd see on a St. Bernard
LOTS MORE! DeskBuddys here: DeskBuddy Collection by CheekyTomato | Printables.com 🟠 Full TNMT collection here: 1987 TNMT Collection by CheekyTomato | Printables.com More added regularly until even the most obscure characters are included.…
Katana from mrhers2 https://www.thingiverse.com/thing:3118086 Turtle Shell by jootoole https://www.thingiverse.com/thing:4983162 Strap used… https://www.amazon.com/gp/product/B07H1D15LZ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Cowabunga! Bring the leader of the Teenage Mutant Ninja Turtles to life with this incredible 3D printable Leonardo STL model that's perfect for any TMNT fan's collection. This detailed figurine captures Leo in his iconic pose, complete…
This baby heart (Pinard stethoscope) horn can be printed in one go without support. I would like to see how other people made and use this for themselfs, a ‘make’ would be very nice. Thank you.
Printed in PLA on Prusa Mini+ with 0.2 layer height. You'll need at least 24 pieces. Various other types of domes can be found on the internet.
I needed a mountingplate for the Arduino Leonardo, so i designed this one. I used M3x4x5 threaded inserts and M3 screws for it and printed it in PETG with 0.3 Layerheight and a 0.4 nozzle.
I created a set of dogs that are easy to print and scalable to any size! I use an A.I. App on MakerWorld then I bring the models into Tinkercad to fix them.
Winston Leonard Spencer Churchill – Buste 🇫🇷 Description (Français) Ce buste rend hommage à Winston Leonard Spencer Churchill , l’une des figures politiques les plus marquantes du XXᵉ siècle. Il est inspiré de la photographie la plus…
Bust – Leonardo di ser Piero da Vinci This bust represents Leonardo di ser Piero da Vinci , one of the greatest geniuses of the Renaissance, whose influence spanned art, science, engineering, anatomy, and philosophy. The sculpture is…
I created a set of dogs that are easy to print and scalable to any size! I use an A.I. App on MakerWorld then I bring the models into Tinkercad to fix them.
Simple adapter to fit a Nardi wheel onto a Simucube/OSW/etc standard 70mm PCD base. Requires 6xM5 heated inserts to be fitted into the Nardi (non-recessed) holes. I used these heated inserts, M5x6x7OD size, but have also included the STEP…
The Historical Chess Set Series #7 - Leonardo Da Vinci 's Chess Set In 2006, researchers in Italy reported the discovery of a manuscript on the game of chess by Luca Pacioli, a leading mathematician of the Renaissance. The manuscript is…
Covers for an Arduino Uno and Leonardo. Important parts are exposed and the rest covered up [to prevent dirt build-up, accidental shorting or liquid spills]. Designed by: https://www.taito3d.co.za Instructions Print without support.
I used pieces from several existing models. I also created a more realistic turtle head that's dummy 13 compatible. All files are 100% size. Leo and Raph are 125% in my pictures. Mikey is 100% (and has different hands in the pics. I can…
A lithophane of the classic painting by Leonardo da vinci “The Mona Lisa” (A lithophane is a print where you use white filament to create an image and when you hold it up to light you can see through the thinner areas of the print giving…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.1mm Swap Instructions: Start with Black At layer #7 (0.58mm) swap to Jade White At layer #14 (1.14mm) swap to Black At layer #15 (1.22mm) swap to Blue At layer #17…
Ersatz Zahnrad für das originale Doppel-Zahnrad mit 120 - 127 Zähnen für den Antrieb des Vorschubgetriebes an der Drehmaschine Bernardo P600G. Da man das originale Doppelzahnrad 120-127 nur für zöllige Gewinde benötigt, genügt das 120…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.1mm Swap Instructions: Start with Black At layer #7 (0.58mm) swap to Jade White At layer #14 (1.14mm) swap to Black At layer #15 (1.22mm) swap to Blue At layer #17…
a simple case for arduino Print instructions Category: Computer Summary a simple case for arduino Print Settings Printer Brand: Prusa Printer: I3 MK3S </div> Rafts: No Supports: No </div>
This is a simple digital stethoscope. My girlfriend is pregnant, naturally I wanted to listen to my baby's heart beats. I designed a Pinard stethoscope that fits snugly with this cheap usb microphone . I have not managed to hear my baby's…
This model represents a standard six-sided die, commonly used in various board games and gambling activities. Each face of the die has a different number of pips ranging from one to six.
(Deutsche Beschreibung: siehe unten) I have tried to design a wind chime based on Leonardo da Vinci's flying machine, the Ornithoper . The wind chime should be as close as possible to the original sketch. I hope you like it! Printing…
Ornithopter Simplified Ornithopter Model by Leonardo Da Vinci Ornithopter with Chibi Leo Hi guys! I tried to create a simplified model of an ornithopter that can fly (glide). The wing should slide into the tail with a little force.…
If you appreciate my work, consider supporting me by buying me a cup of hot chocolate! :) https://buymeacoffee.com/aleksandrs The Pinard Horn is a specialized type of stethoscope designed specifically for monitoring the heart rate of a…
i have made these Mazda miata mx5 aerodynamic canards for my car to have a little more downforce
Vintage Video Games - Day of the Tentacle - Bernard Bernoulli, Laverne, and Hoagie - 1993 3D printable model.
Simple silhouette with strings in front for effect. This is just something I wanted for my home office. I've only gotten into 3d printing in the past month or so – but it's been a really great hobby so far. I thought I'd upload this model…
Leonard Simon Nimoy – Spock Version Buste 🇫🇷 Ce buste représente Leonard Simon Nimoy dans son rôle emblématique de Spock, personnage iconique de la saga Star Trek . Demi-humain, demi-Vulcain, Spock incarne la logique pure, la maîtrise des…
This thing is obsolete. It is replaced by https://www.prusaprinters.org/prints/43002-classic-arduino-mouning-plate . This thing contains a mounting plate and a drilling guide for the “Arduino UNO / Duemilanove / Diecimila / Leonardo / NG…
Leonardo DiCaprio porshe 911 1969
This is a Leonardo da Vinci bust that was scanned with 123D Catch. I sculpted the mesh and added texture after filling holes and scaling and orienting the file with Meshmixer. The original file was created by Robert Meikins:…
Printed at 0.2 mm layer height and 100% infill Two different types of top cover: 1- Push cover 2- Slide cover
Add holes for 6x74mm to the already existing 6x70mm holes on the Moza Quick Release.
I have a bunch of Menards Xtreme garage shelving for storage. I wanted hooks that fit the sides of the shelves so I designed these. Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 Plus Rafts: No Supports: Yes…
remixed to add bottom, reduce hole size so m3 threads itself in, thickened the walls and built in more tolerance for board irregularities. I converted stl to a step file and posted that also. m3x4mm screws to hold the board secure.…
All the custom bits you'll need to change you Leonardo Robot into a Voltron! Just a few minutes late for the design challenge! But, I had fun nonetheless! Print instructions Unassociated tags: boxing day challenge, design challenge…
Zahnrad mit 34 Zähnen für den Antrieb des Vorschubgetriebes an der Drehmaschine Bernardo P600G um mit der Getriebehebelstellung 4 / B die Steigung 0,85 mm schneiden zu können. Diese Gewindesteigung wird an manchen alten Motorrädern…
Student 3D designer chasing a dream. I don't own a printer yet, but every like and download truly helps. Thank you! All❤
Leonardo da Vinci's self-supporting bridge Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2 Infill: 15% Filament: tangled.com PLA white Category: Engineering
🐶 Appearance & Personality Coat: Dense and soft, can be short or long-haired , usually white with shades of red, brown, or brindle patches . Build: Large and sturdy, with big paws, floppy ears, and an expressive face full of kindness.…
St. Bernard Saint Bernard Low Poly Dog statue Powered by MakerWorld-Image-to-3D ( https://makerworld.com/makerlab/imageTo3d )
Renard en silhouette, parfait pour décorer une chambre, un salon ou un coin lecture. Le modèle fait 5 mm d’épaisseur , ce qui lui assure une bonne rigidité et un rendu propre après impression. Petit conseil d’impression : Laissez le…
This is a model I made to plug the hole in my Nardi wheel with an NRG quick release behind it. I wanted it to be flush and not bolted so I utilized an O-ring to make it hold firm. The o-ring I used is from McMaster.…
