Search results: nbx

Sort order

59 models

P
Printablesbkerler

INBXX Zip Tie for 2020 extrusion

Zip Tie for 2020 aluminium extrusion used on INBXX. I made this model as regular 2020 zip ties I found on printable didn't fit well. Picture was a prototype which had a bit more space, the current version is pretty tight.…

Downloads
329
Likes
135
Rating
5
P
Printablesjoakim_t

Handle for maintenance hatch on INBXX

This is a small handle to replace the hole(s) in the INBXX maintenance hatch to make opening the hatche(s) easier and seal up the hole(s) if using the Semi-smart heater. Tested in ASA with 0.4 mm nozzle, but should work just as well in…

Downloads
135
Likes
19
Rating
5
P
PrintablesV1nce78

INBXX mod - Magnetic Service Hatch

With this mod the service hatch is closed with magnets, so you can open it with one hand. And it closes the air gap around the service hatch. I've used @Joakim_T's handle as a starting point (Download it, you'll need it). Add 2 magnets…

Downloads
123
Likes
31
Rating
4.94
P
PrintablesJeanLucPicard

INBXX - Corner Socket for Core One+ Crushed Legs

For the storage of the print sheets I upgraded my CoreOne+ with " Crushed legs with expandable support for multiple steel sheets for Core One ". I did not like the idea of it just sitting on top of INBXX , so I designed the corner plates…

Downloads
121
Likes
47
Rating
5

INBXX angled PTFE passthrough, PTFE holder

Both of these should lineup with A2 version of INBXX. Chapter names contains links to the onshape project files. Small angled PTFE passthrough : Passthrough is angled 25° to shorten the bend radius and hardmounted to stop it poping out of…

Downloads
119
Likes
33
Rating
5
P
PrintablesKrosta

COREBOXX/INBXX Semi-smart PCB mount with top cover and zip ties

To be sure, that some spool will not damage the main PCB of the SEMI-Smart addon, I have created this cover and also added space for four zip ties on it, so you can organize cables better. For now it is only prepared, waiting for the PCB…

Downloads
109
Likes
24
Rating
5
P
PrintablesV1nce78

Perforated PTFE slot plugs mod for the INBXX

This is a set of perforated slot plugs for the INBXX. (The INBXX is a filament storage option designed by Voxel3d - The must-have for every Prusa Core One owner - or every 3D printer owner for that matter. I personally like it a lot,…

Downloads
100
Likes
27
Rating
5
P
PrintablesVoxel3D_NL

Assisted Speed Loader - for INBXX-series

What is ASL? Assisted Speed Loader (ASL) is a simple, modular device to load the filament from INBXX to the toolhead with the press of 1 button. Each module mounts on the 2020 profile in front of the spools, and the modules link together…

Downloads
66
Likes
40
Rating
5
P
Printablesyodaman626

Angled Perforate PTFE slot plugs mod for the INBXX

I made this because my INBXX has 5x1kg narrow rollers on the upper shelf, and 2x2kg+1x1kg wide rollers on the bottom, and I wanted my PTFE tubes to be further apart when they exited my INBXX.

Downloads
41
Likes
14
Rating
0

Holder mod for Coreboxx dessicant to fit in Inbxx

Holder mod for Coreboxx dessicant to fit in Inbxx

Downloads
39
Likes
5
Rating
5
P
PrintablesMandicReally

Double INBXX Middle Door Trim / Seal

Double INBXX Center Door Trim Why does this exist? The double INBXX has a gap between its two doors and the center 2020 extrusion. This trim fills that space for a cleaner finished look and to better seal the doors against air leakage. It…

Downloads
39
Likes
14
Rating
5
P
Printablesashurexm

INBXX HULA Corner Socket for Core One

Corner sockets In order to retain the HULA feet on your Core One and have it securely stacked on the INBXX . These are designed to work with my HULA Leg Adapters - fitment with any other kind of adapter has not been tested and may not…

Downloads
32
Likes
6
Rating
4.5
P
PrintablesGirotz

INBXX small plug for powercord and gpio cable

Small plug for the INBXX that is split in half and have a bigger hole to let the powercord and the gpio cable go to the INBXX pcb.

Downloads
31
Likes
7
Rating
5
P
PrintablesKoosh

INBXX fixed Hinges with offset

you can see the before and after photos for the INBXX the parts that shipped did not fit. This hinge replaced the bottom one and fixed the alignment.

Downloads
28
Likes
8
Rating
4.67
P
PrintablesrenrenPDX

INBXX Double Door Trim Mod

This is a trim piece that's designed to attach to the middle aluminum extrusion bar on a double INBXX. Required Hardware 1 - M3x10 (or M3x12 max but will leave a mark on the 2020 extrusion; M3x8 might work but have not tried) 1 - M3 T Nut…

Downloads
28
Likes
6
Rating
5
P
PrintablesKoosh

INBXX Maintinance Lock

This is for the INBXX and replaces the stock maintinance lock hatch. There is a tab that lets you open it with one hand.

Downloads
24
Likes
9
Rating
5
P
Printablesfuchsr

INBXX Mod — PTFE Mount with Pneumatic Connectors

Now for both PC4-M10 and PC4-M6 connectors! This is a modified PTFE mount used for the spool roller variant of Voxel3D's INBXX system that adds a PC4-M10 or PC4-M6 connector to secure the PTFE tubes. I use the INBXX to feed my Core One…

Downloads
24
Likes
6
Rating
5
P
Printablesashurexm

INBXX Threaded Insert Press Helpers

A helper jig that holds the INBXX printed profiles level for you to more easily use a press to put in all of the threaded inserts in the printed profiles. Designed to be a quick print, print at least two. There's a hole to optionally…

Downloads
23
Likes
7
Rating
5
P
PrintablesGirotz

Tnut bar for INBXX

Print 2x of each TnutBar, add some M3 nut in every slot and insert them into the aluminium profile. The tnut bar are splitted (so you need 2x for each tnut bar) to fit them on the core one bed. For the INBXX project you will need 16x…

Downloads
20
Likes
6
Rating
5
P
PrintablesrenrenPDX

INBXX Roller and PTFE 2020 Spacers (for SpoolRoller Configs)

INBXX Roller and PTFE Spacers (for SpoolRoller Configs) Not all of my t-nuts holding the Rods and PTFE mounts are completely secure. Some of them may end up moving a little during active use and modifications of INBXX, so I wanted…

Downloads
20
Likes
4
Rating
5
P
PrintablesCPS_Systems

Bud 32012 Plate NBX-32912-PLA

Mounting plate for Bud 32012 Enclosure, replaces Bud NBX-32912-PL. No component mounting holes, solid with holes for attaching plate to box. Fits enclosure: NBF-32012, NBF-32112, NBF-32212, NBF-32312, NBF-32412 Modify as per last picture…

Downloads
20
Likes
1
Rating
0
P
PrintablesJesse

INBXX Maintenance hatch handle

A simple print that closes off the maintenance handle opening on INBXX and makes it a bit easier to open.

Downloads
19
Likes
2
Rating
0
P
PrintablesRexit

INBXX angled PTFE passthrough misc hole layouts

Remix of Dominik Chuchlík's ptfe passthrough for INBXX. With their guidance I used slicer shapes to fill in some of the holes in various patterns to meet my particular setup. the 3MF SHOULD have the shapes intact at the right height and…

Downloads
19
Likes
5
Rating
0
P
PrintablesrenrenPDX

INBXX hole plugs

This is a plug that fits in the pre-drilled holes in the back and top panels of INBXX. It seats securely, flat, and doesn't protrude through to the inside. If you have stock INBXX, you'll need 16 (single) or 28 (double). If you have Semi…

Downloads
18
Likes
7
Rating
5
P
Printablesashurexm

INBXX Universal Caster Adapter

I wanted to use a different set of casters than the INBXX was designed for, so I created this adapter block that fits the footer profile and securely bolts into the bottom using original mounting points. Designed for a GD-40F center post…

Downloads
15
Likes
7
Rating
0
P
PrintablesrenrenPDX

INBXX PTFE Mount with Pneumatic Connectors with ECAS-04 or PC4-M10 on both ends

PTFE tubes are slippery AF. With regular use, chances are high that the tube will slip in either direction, requiring repositioning. The original mod placed a single threaded pneumatic connector at the rear, which stops slippage when…

Downloads
14
Likes
4
Rating
0
P
PrintablesSnoopy31195

Janus - Improved Sealing for Inbxx-L

This is a collection of parts designed to improve the seal of an Inbxx-L with the goal of providing better humidity control for filament storage. The first part is to improve the sealing of the front door. To be written. Uses m3 heat set…

Downloads
14
Likes
9
Rating
5
P
PrintablesIncongruity

Core One / INBXX Universal LED Strip & Wire Holder

The aim was to make a simple, highly flexible way of adding additional LED strips to the Core One or adding new lighting to the INBXX project. This magnetic or screw-mounted strip is designed to hold 8 or 10mm (or smaller) LED strips or…

Downloads
14
Likes
4
Rating
5
P
PrintablesKoosh

INBXX Assisted Filament Loader – Budget Remix

A motorized, switch-triggered filament loader for your INBXX setup. It’s a remix of the original assisted loader for INBXX (linked in the remix section), redesigned so it needs no proprietary PCB and uses common parts from Amazon . Wire…

Downloads
14
Likes
8
Rating
0
P
PrintablesrenrenPDX

SemiSmart PSU Holder for INBXX (US Version 44x71mm)

The cable for the PSU is not very long and is bulky. I wanted a means to mount the PSU to INBXX instead of the Core One. This mod is for the US version, but the EU version can be made using the included 3mf project file if needed. I also…

Downloads
13
Likes
4
Rating
0
P
PrintablesNate Wismer

Plug for INBXX panels, solid and 3/5hole versions

Plug for INBXX panels, solid and 3/5hole versions for routing ptfe tubes as i have 5 x 1kg rollers on top level and 2 x 2kg/ 1 x 1kg on bottom level, also one plug cut in half for LED power cable

Downloads
12
Likes
1
Rating
0
P
Printableskiklhorn

inbxx-small-plug-with-angled-ptfe-passthrough - shorter PTFE

Review the original model's description.

Downloads
12
Likes
4
Rating
5
P
PrintablesRschell

INBXX Passive rear storage for Double cabinet

Created three brackets for the Double INDXX cabinet to store up to 6-1kg spools of filament. All total the cabinet can hold 14-1 kg spools in this configuration. Plan to place this cabinet under a Core One INDX conversion, once they are…

Downloads
11
Likes
12
Rating
5
P
PrintablesPaul

Stackable inbxx

This model adds support so you properly can stack a double and a single inbxx. I wanted to have the Core one a bit higher up, as with a standard inbxx. However, without some side supports this will not work. This model adds support for…

Downloads
10
Likes
2
Rating
0
P
PrintablesSnoopy31195

Switchboard for Inbxx-L

Switchboard is an addon for the Inbxx-L (it will work on Inbxx if the screw spacing is the same, if not let me know) that allows for easy swapping of filaments without the hassle of moving spools around. Just retract the filament below…

Downloads
10
Likes
3
Rating
0
P
PrintablesIncongruity

INBXX – slim & symmetrical center frame insert

This is very similar to the original model I've remixed it from: Use the same hardware & printing instructions. This is simply a version that sits basically flush with the top & bottom of the 2020 extrusion crossbar, allowing for equal…

Downloads
9
Likes
3
Rating
0
P
PrintablesrenrenPDX

Double INBXX Middle Trim Dove Tail version

Dovetail version Uses the same end piece from the original. The middle piece is dove tailed in the middle and secured together with a decorative piece and screw. It's still held in place by one screw, but due to being cut in the middle,…

Downloads
7
Likes
2
Rating
0
P
PrintablesPreZ

INBXX Maintenence Door Hinge using M3 Bolts

The hinge on the INBXX is print-in-place. The default one for me was fused. There are alternate tolerance versions, but having to ‘crack’ it (especially if it needs a vice and hammer, which for stronger materials, it might) doesn't sit…

Downloads
6
Likes
0
Rating
0
P
PrintablesIncongruity

INBXX Caster Risers

Caster Risers for INBXX – 4 Heights These are printed caster risers for the INBXX for Prusa CORE One INDX enclosure. There are four different heights, so you can choose what works for your needs. They mount at the INBXX’s bottom corners…

Downloads
6
Likes
1
Rating
0
P
Printablesfuchsr

LED Light Bar for INBXX

I'm using MandicReally's's LED light bar models in my Core Ones and INDX. They're great. However... They're no bueno with the aluminum 2020 extrusions used in Voxel3D's INBXX, which are not magnetic. So I made a remix to make the light…

Downloads
6
Likes
1
Rating
0
P
PrintablesJames D

Inbxx - Core One - Bottom Bracket Adapter - Casters

This is an adapter to add casters (2" wheel dia, 2.88"x2.88" plate) to the Inbxx by Voxel. This is the exact casters I purchased: https://www.amazon.com/dp/B0H1QZHJW9?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1 (Leveling Casters Wheels…

Downloads
5
Likes
0
Rating
0
P
PrintablesRexit

INBXX - magnetic t-nut placement jig

While waiting for kits/parts to ship for INBXX I made this jig using magnets I had on hand. The idea is that if you are self-sourcing and using loose t-nuts, possibly t-nut sliders the magnets are spaced to match the holes in the faces. I…

Downloads
4
Likes
5
Rating
0
P
PrintablesAndrew Poage

INBXX Roller and PTFE 2020 Spacers CoreOneL Remix

Created the sizes for Core one L. Uses the same side front and mid. Created an extended Rear. Also fixed the PTFE sizes

Downloads
4
Likes
3
Rating
0
P
Printablesecambero

PC4_M10 PTFE Threaded for INBXX

I do not like passthroughs for PTFE they always slip and tend to cause filament jams. Keeps your PTFEs tubes in place. Printed w\ .2 layer height with no problems

Downloads
3
Likes
3
Rating
0
P
Printablesfuchsr

INBXX Nozzle Holder for INDX Passive Tools

I have a few extra tools for my INDX, and I thought it would be great to store them next to my INBXX. The design I came up with can hold up to 5 nozzles and mounts to the side of an INBXX, using pre-existing screw holes. Compatible with…

Downloads
3
Likes
1
Rating
0
P
PrintablesAkkim

INBXX - LDO Door Panel Hole jig

INBXX by Voxel - there was an error in the hole locations on the LDO door panels early on. While this likely will be remediated for future builds, if you're a project OG, you can either use the off-set hinges, or you can print this 2-part…

Downloads
2
Likes
0
Rating
0
P
Printableskiklhorn

INBXX litle improvements

maintenance_lock-1-a0+9mm - Prevents the service door from swinging inwards, even when it is unlocked. The model is highly inspired by the original and recreated by hand. You can use it only if you have purchased the original from Voxel.…

Downloads
2
Likes
3
Rating
0
P
PrintablesKerryedAway

INBXX Clamp Slot Plugs - Large blank and PTFE, and small blanks

Print using the same settings you did for the other inbxx parts.

Downloads
2
Likes
0
Rating
0
P
PrintablesIncongruity

Core One INBXX Door Sealing Hinge

Description The INBXX is a fantastic solution for filament management and it's a good pairing with INDX or an MMU. These alternative hinges and magnet mounts allow it to seal better and keep more moisture out. Inspired by the Janus…

Downloads
2
Likes
2
Rating
0

INBXX Filament Guide and PTFE Clamp

I have found issues with the INBXX setup when feeding filament. The Filament guide doesn't stay on the pfte tube and the ptfe tube is easily pushed out of the ptfe mount. Rather than printing a new ptfe mount with fittings i figured a…

Downloads
1
Likes
0
Rating
0
P
Printables

INBXX - for PRUSA CORE one INDX

Upgrade your multi-material 3D printing setup with the INBXX by Voxel3D, the ultimate filament storage and management system designed specifically for the Prusa CORE one. Say goodbye to tangled spools and cluttered workspaces; INBXX is an…

P
Printables

INBXX - Corner Socket for Core One+ Crushed Legs

For the storage of the print sheets I upgraded my CoreOne+ with " Crushed legs with expandable support for multiple steel sheets for Core One ". I did not like the idea of it just sitting on top of INBXX , so I designed the corner plates…

P
Printables

Tnut bar for INBXX

Print 2x of each TnutBar, add some M3 nut in every slot and insert them into the aluminium profile. The tnut bar are splitted (so you need 2x for each tnut bar) to fit them on the core one bed. For the INBXX project you will need 16x…

P
Printables

Handle for maintenance hatch on INBXX

This is a small handle to replace the hole(s) in the INBXX maintenance hatch to make opening the hatche(s) easier and seal up the hole(s) if using the Semi-smart heater. Tested in ASA with 0.4 mm nozzle, but should work just as well in…

P
Printables

Angled Perforate PTFE slot plugs mod for the INBXX

I made this because my INBXX has 5x1kg narrow rollers on the upper shelf, and 2x2kg+1x1kg wide rollers on the bottom, and I wanted my PTFE tubes to be further apart when they exited my INBXX.

P
Printables

Bud 32012 Plate NBX-32912-PLA

Mounting plate for Bud 32012 Enclosure, replaces Bud NBX-32912-PL. No component mounting holes, solid with holes for attaching plate to box. Fits enclosure: NBF-32012, NBF-32112, NBF-32212, NBF-32312, NBF-32412 Modify as per last picture…

P
PrintablesVoxel3D_NL

INBXX - for PRUSA CORE one INDX

Upgrade your multi-material 3D printing setup with the INBXX by Voxel3D, the ultimate filament storage and management system designed specifically for the Prusa CORE one. Say goodbye to tangled spools and cluttered workspaces; INBXX is an…

Likes
978
Rating
4.55
P
PrintablesVoxel3D_NL

INBXX-L - for PRUSA CORE one L INDX

Upgrade your multi-material 3D printing setup with the INBXX-L by Voxel3D, the ultimate filament storage and management system designed specifically for INDX on the Prusa CORE one L. Say goodbye to tangled spools and cluttered workspaces;…

Likes
131
Rating
5