Search results: nou

Sort order

1,577 models

Flashforge Adventurer 5M (AD5M) IMPROVED Spool Holder, Inlet, Runout Sensor Mount + SIDE MOUNT Spool Holder! v1.1

This was made for use with the DIY enclosure available here . HEADS UP - 1 of 3 - new better version of this! I've published a new, improved remix of my popular side-mounted spool holder — PLEASE NOTE: it's not just about the four…

Downloads
6,537
Likes
644
Rating
4.6
P
Printablesgadjet

Creality K1 Filament runout sensor side mount plate

This plate allows you to mount the Filament runout sensor on the right hand side of the Creality K1 making it easier to use a filament roll on the side of the printer instead of the rear. This plate uses the two screws that secure the…

Downloads
6,417
Likes
325
Rating
4.67

Flashforge Adventurer 5M (AD5M) IMPROVED, SIDE-MOUNT Spool Holder, Inlet, Runout Sensor Mount! v3.1

FAQ Q: I printed your enclosure and I can’t figure out how to install the filament sensor / spool holder. I’ve looked on YouTube for installation videos and still stuck. Any help would be greatly appreciated. A: Not long after the initial…

Downloads
4,939
Likes
451
Rating
4.96
P
PrintablesBuildX

#0189 [UPDATED] Fanout Playing Cards Case, now V2!

*** Thanks for checking out this model! *** If you appreciate what I'm doing, buying me a coffee would be a wonderful show of support! Good quality designs take time, effort, and CAFFEINE! ;-) And then check out my other models for…

Downloads
4,368
Likes
1,674
Rating
4.78

[Option 1 of 3] Flashforge Adventurer (AD5M) Runout Sensor - Bowden PTFE Coupler C-Clip

This is one of three options I've made available for Bowden PTFE Coupler C-Clip for the Adventurer (AD5M) Runout Sensor. OPTION 1 of 3 — Clone of the stock factory clip PLA. Print as oriented. I used 0.2 mm layer height on 0.4 mm nozzle.…

Downloads
3,715
Likes
520
Rating
4.89
P
Printables3DPrintBunny

Tic Tac Toe in a box (Noughts and crosses)

Tic Tac Toe in a box Easy to print without supports Print one base and lid, and 5x Cross 4x Nought Make sure you have 'print thin line' checked when printing Use some 1.75mm filament for the hinges Category: Games

Downloads
3,389
Likes
1,561
Rating
4.88
P
PrintablesFreshPrints

Anycubic Filament Runout Sensor Print Head Mount for Kobra 2 Pro , Kobra 2 Max , Kobra 2 Plus , Kobra 2 Neo, Kobra 2

Move your Kobra 2 filament runout sensor to the extruder with this mount! Placing the sensor closer to the extruder reduces filament wasted at the end of a spool, Great for top mounted spool holders and varies other locations. 3 Model…

Downloads
3,045
Likes
459
Rating
4.88
P
PrintablesFreshPrints

Anycubic Filament Runout Sensor Redirection Mount for Kobra 2 Max / Kobra 2 Pro / Kobra 2 Plus/ Kobra 2 Neo / Kobra 2

This allows redirection of filament for easier travel to hot end when printing with a top mounted spool holder. Installation and Design explanation: Runout Senor Bracket: Tighten down the bolt to sensor bracket to the bottom base. Then…

Downloads
2,810
Likes
303
Rating
4.89
P
PrintablesBamingo Design

Art Nouveau Planter

Clean lines meet flowing floral patterns for your plants. Print Settings: Layer height: 0.16-0.20 mm Infill: 15% Size: 6 cm Opening Scale to 150% for a 9 cm Scale to 200% for a 12 cm Want to sell prints? Check our profile for a commercial…

Downloads
2,534
Likes
993
Rating
4.91

(1 of 4) Flashforge Adventurer 5M (AD5M) IMPROVED, SIDE-MOUNT Spool Holder, Inlet, Runout Sensor Mount! v2.1.1

FAQ Q: I printed your enclosure and I can’t figure out how to install the filament sensor / spool holder. I’ve looked on YouTube for installation videos and still stuck. Any help would be greatly appreciated. A: Not long after the initial…

Downloads
2,533
Likes
207
Rating
5
P
PrintablesMatyaash

LEGO DUPLO train tracks - rails, turnouts and turntable

Set of rails: Strainght in 2x, 1x, ½ and ¼ of standard length. Flexible rail in 1x standard length. Curve in 1x, ½ and ¼ standard length. Two way crossing in 60° and 90° Three way crossing Truntable in 1½ of standard length. Turnout…

Downloads
2,526
Likes
299
Rating
4.96
P
PrintablesHenlor

K1 Extruder Filament Runout Sensor

This filament sensor has many advantages : It facilitate the filament change operations. When filament is detected by the sensor that triggers an auto load material function. Since we don't use the rear filament sensor, the reverse bowden…

Downloads
2,278
Likes
829
Rating
4.82
P
PrintablesDrewDeeDoo

Anycubic Kobra 2 runout sensor upgrade kobra 2 pro Kobra 2 plus Kobra 2 max Kobra 2

Relocate your runout sensor to the top of the tool head. Works for Kobra2 Max,Plus,Pro -No supports necessary JST connectors (no soldering or modifying necessary.) Just plug 3 in line to extend: https://a.co/d/bYScS67 Use with this handy…

Downloads
2,240
Likes
264
Rating
5
P
Printablesark76

Ender 3 V3 SE/KE filament guide (bowden + runout sensor)

A filament guide that replaces the spool holder and enables the attachment of a bowden coupler/connector and the filament runout sensor. You can use the original screws for the attachment. Use PETG, ASA or ABS if you plan to have your…

Downloads
2,175
Likes
299
Rating
4.88
P
PrintablesBMO_FUSE

Not Enough Crimps Sample Pack Climbing Holds

A sample of my upcoming paid pack of climbing holds There are 8 sample holds for you to try which has been brought to you by my generous holiday spirit :) Sample Crimp 1 A medium size crimp with a moderate amount of incut but a small edge…

Downloads
1,844
Likes
261
Rating
5
P
Printablesopenheart

Runout Sensor Plug for Centauri Carbon

Noticed a hole in the side of the printer when considering airflow and leakage for stuff like ABS so I made this snap-in plug for it. Printed in SUNLU PLA+ at default settings.

Downloads
1,749
Likes
263
Rating
5
P
PrintablesAristante74

ender 3 v3 ke spool and runout sensor holder

designed to fit the ender 3 v3 Ke with the factory run out sensor. This shifts the spool 90 degrees and centers the weight on the gantry. there is a mount to use with the KE's factory run out sensor. you will need an additional m4 12 and…

Downloads
1,586
Likes
185
Rating
4.6
P
PrintablesDelfisMaximus

K1C-K1 runout sensor side mount

Side mounted filament runout sensor. Requires two m3 x 8mm or m3 x 10mm bolts for printer. Make sure the thread is no longer than 10mm as it will protrude too far into the machine.

Downloads
1,549
Likes
155
Rating
5
P
PrintablesLuBi Tech

Neptune 4 Plus Filament Runout Sensor Holder

A simple runout sensor holder for Elegoo Neptune 4 Plus with two filament holders. Very useful for multicolor prints. Installation: remove existing holder fix with one of the screws the mount to the filament holder place the sensor screw…

Downloads
1,394
Likes
168
Rating
4.89

1:100 Scale 1906 HMS Dreadnought RC Ship No Support Model Pieces

PLEASE READ THE ASSEMBLY MANUAL PDF!!! Print Settings Printer brand: Bambulabs Printer: Bambu P1S Rafts: No Supports

Downloads
1,366
Likes
136
Rating
1

Centauri Carbon Interior Chassis Runout Sensor Mount

This mount fastens to the top M3 screw hole for the wiring harness anchor on the right rear of the ECC. There is a hole for refastening the anchor point for the harness in the model. However, it is not required since the design of this…

Downloads
1,324
Likes
128
Rating
4.88
P
PrintablesPeter

Sodastream Bottle Drip Snout

Also a Sodastream lover? But washing the bottles for reuse is a burden? Here is a useful tool. From now on simply wash your bottles with mild detergent or clear water and let it dry upside down using the "DripSnout" From now on always…

Downloads
1,283
Likes
220
Rating
4.97

(3 of 4) Flashforge Adventurer 5M (AD5M) IMPROVED, SIDE-MOUNT Spool Holder, Inlet, Runout Sensor Mount! v2.1.1

FAQ Q: I printed your enclosure and I can’t figure out how to install the filament sensor / spool holder. I’ve looked on YouTube for installation videos and still stuck. Any help would be greatly appreciated. A: Not long after the initial…

Downloads
1,261
Likes
85
Rating
5
P
PrintablesEng. Yehia

FANOUS (Ramadan lantern)

This lantern is a really cool decoration for RAMADAN, I designed it in Solidworks, and I tried to make it as simple as I can, this design consist of 8 parts: Top x1 Bottom (with or without an electric candle) x1 sides x5 door x1 you can…

Downloads
1,167
Likes
221
Rating
5
P
PrintablesKaminoKGY

Filament Runout Sensor Mount Strong Ender 3

This end-of-filament sensor mount is solid and won't bend during retractions or under the tension of the filament spool. Please give it a ❤ if you like it 🥰

Downloads
1,156
Likes
64
Rating
4.67
P
PrintablesDavid Relich

UPDATED - Voron 2.4 CW2 (RC1) Filament Runout Sensor Mod

I print big things and the thought of wasting filament and time because suddenly, in the middle of the night, the filament runs out, is not something I am fond of. So I created a simple filament sensor mod for Voron's CW2 (RC1), using a…

Downloads
1,104
Likes
254
Rating
4.56
P
PrintablesTritschi

New Wings for our Christmas Announcement Angel

It took me quite some time to find these “peaceful” wings. They belong to a guy called “hero”. Sorry that I cannot find the original source of this guy, checked Thingiverse and Printables for a couple hundred models again, but did not…

Downloads
1,099
Likes
104
Rating
5
P
PrintablesFlobi

Ender V3 SE/KE - Runout Sensor - Print Head Mount

If you like my work, tinkering and messing around with stuff. Then please consider supporting, it would be greatly appreciated! I'll be looking forward to interact with you guys and our shared passion for making! :)…

Downloads
1,052
Likes
183
Rating
5
P
Printablesgameyspirits

WWE announcer's table - breakable

WWE announcer's table that breaks apart. I use 5mm x 3mm magnets to hold it together. The geometry of the table makes it extra tough so doing a power bomb directly on top of the table might not break it apart but jumping off the top rope…

Downloads
1,035
Likes
80
Rating
4.67
P
Printablessgaon

Villainous Insert - All Expansions

This insert for Disney Villainous was my attempt to get all the current (Oct. '22) expansions in the base box as well as have some future-proofing. Considering the materials of all the expansions consist of a greater volume than there is…

Downloads
1,029
Likes
174
Rating
4.75
P
Printablesivor ip

Elegoo Centauri Carbon Runout Sensor Offset Post/Stanchion(Slot and Screw Design)

Elegoo Centauri Carbon (new batch with slot and screw design). Offset the runout sensor to center of spool. Replace original center screw with m3x30

Downloads
971
Likes
107
Rating
4.91
P
PrintablesAlia5

Galileo 2 (G2E) Filament runout sensor (UPDATED) [Filametrix and ERCF compatible]

Galileo2 (G2E) with filament runout sensor. - ECAS-Fitting compatible. - Step file included. - No change in overall G2E dimensions BOM: 1x Omron D2F microswitch 1x 5mm steel ball bearing (optional) 2x M2x8 self tapping screws (You might…

Downloads
942
Likes
199
Rating
5
P
PrintablesCritterNinja

Elegoo Centauri Carbon Improved Filament Runout Sensor Housing

This is an improved runout sensor housing for the Elegoo Centauri Carbon that uses 2 PC4-M6 pneumatic fittings on either end so you can directly connect a Boden tube to it. You can benefit from this if you use an external dry box, or…

Downloads
894
Likes
168
Rating
4.78
P
Printablesdmika7200

SV08 Filament runout sensor holder

This is a filament sensor holder I've made for use with bottom mounted spool holders for Sovol SV-08 3D printer (such as https://www.printables.com/model/901288-sovol-sv08-side-mount-spool-holder-v2 or…

Downloads
809
Likes
100
Rating
5
P
PrintablesPeter Mastren

Relocate Filament Runout Sensor

This model remixes the right rear riser from the original “ JC-Creality K1 Lid Riser ” by Joe Cooper which must be printed for this to be useful. The rear mounted filament spool holder on the Creality K1 is inconvenient if not downright…

Downloads
785
Likes
95
Rating
5
P
PrintablesOZL01

Ender 3v2 filament runout sensor

After I installed a BL touch I realized that I could use the z end stop switch as a filament runout sensor. It was basically a free upgrade and it's nice to not have to worry about running out of filament when you're getting to the end of…

Downloads
775
Likes
105
Rating
4.5
P
PrintablesAirTurner

Elegoo Centauri Carbon runout sensor PTFE adapter

Clicks onto the runout sensor and holds a PTFE adapter. No disassembly of the runout sensor, connect your drybox via PTFE tube for those moisture sensitive filaments. Versions available for PC4-M6 and PC4-M10 adapters. UPDATE 19-09-2025:…

Downloads
764
Likes
108
Rating
3.75
P
PrintablesJoshua Henry

Tiny Filament Runout Sensor

I needed an inline filament runout sensor that I could stick inline between Bowden tubes on either end, but I wanted it to be as small as possible and require very few parts. I also wanted to only have to print a single part, and I wanted…

Downloads
748
Likes
253
Rating
5

Gelatinous Cube

Support on Patreon! https://www.patreon.com/PrintedEncounter

Downloads
740
Likes
88
Rating
4.75
P
PrintablesPrintedByMark

Spikesnout from Horizon Forbidden West

Add some stat buffs with the Spikesnout's unique abilities! This machine is to scale with the official board game and stands on a 45mm base. It is intended to be printed in one piece (with the base) for stability. All credit for character…

Downloads
740
Likes
121
Rating
0
P
PrintablesMC Taz Man

Villainous Boxes All Disney Characters

As we've acquired all the Villainous expansions, the insert I made previously no longer worked. So, I decided to design a box for each villain. The boxes are more or less unique for each villain, holding their cards, token and other…

Downloads
720
Likes
154
Rating
4.67

[Option 2 of 3] Flashforge Adventurer (AD5M) Runout Sensor - Bowden PTFE Coupler C-Clip with EXTENDED HANDLE

This is one of three options I've made available for Bowden PTFE Coupler C-Clip for the Adventurer (AD5M) Runout Sensor. OPTION 2 of 3 — EXTENDED HANDLE — Easier to use, both for removal and installation, because of having more to grab…

Downloads
709
Likes
118
Rating
5
P
PrintablesPhantomAura

Sovol SV06 Plus Ultimate Filament Runout Sensor Mount

This bracket mounts the SV06 Plus filament runout sensor directly above the hotend, allowing it to detect runouts much closer to the extruder. The mounting hole on this bracket has been molded perfectly to accommodate the runout sensor,…

Downloads
696
Likes
101
Rating
4.8
P
PrintablesBamingo Design

Art Nouveau Bookmarks

Floral reliefs for your pages. No AMS/MMU required, only one color change. Print Settings: Layer height: 0.08 mm with a base layer of 0.16 mm Infill: 100% Color Changes: Start with Black (Esun PLA Matte Black) At layer 8 (0.72 mm), swap…

Downloads
690
Likes
274
Rating
4.67
P
PrintablesFreshPrints

Anycubic Kobra 2 Max Clip On Filament Runout Sensor Bracket for Stock Spool Holder

This is an addon for your stock OEM Spool Holder. Allows you to easily add a filament runout sensor. Was made with tight fitment so would not slip during use without using the tightener bolt hole on the side. Just added it as an extra…

Downloads
674
Likes
65
Rating
5
P
PrintablesnAv

Camp Nou Stadium

3D model of Camp Nou for Barcelona fans.

Downloads
668
Likes
21
Rating
0
P
PrintablesAmfKuna

Stealthburner Clockwork2 Main Body with ECAS and runout + ERCF toolhead switch

Update: I made the ECAS hole tighter with the anchor groove from 8.5mm to 8.3mm and added STEP file Switches are Omron D2F or compatible. Ball is 5.5mm Selftaping screws 2x10 or M2x8 Tested with TPE88 filament. If you want use both…

Downloads
661
Likes
109
Rating
4.25
P
PrintablesChirimorin

Centauri Carbon runout sensor hinge

This is a simple hinge that allows the filament sensor to rotate so filament can feed more smoothly. Required hardware M3x6 bolt, x2 Longer bolts work as well, they will just stick out. I used 8mm bolts in the photo. The head doesn't…

Downloads
648
Likes
121
Rating
4.33
P
PrintablesRicardo NQH

Elegoo Centauri Carbon Filament guide PTFE for runnout sensor

A quik design so you can connect a PTFE tube to the runout sensor in the Centauri carbon, im using it to connect it to my my filament dryer, just unscrew a little bit the sensor, then push the dapter and screw again. Use Supports Print in…

Downloads
630
Likes
92
Rating
3.75

(4 of 4) Flashforge Adventurer 5M (AD5M) IMPROVED, SIDE-MOUNT Spool Holder, Inlet, Runout Sensor Mount! v2.1.1

FAQ Q: I printed your enclosure and I can’t figure out how to install the filament sensor / spool holder. I’ve looked on YouTube for installation videos and still stuck. Any help would be greatly appreciated. A: Not long after the initial…

Downloads
618
Likes
33
Rating
5
P
PrintablesMaker Baer

Qidi X-Max 3 Runout Sensor L-Bracket

Since I don't want to feed the Qidi X-Max 3 with filament from the back or the left side, but want to use the run out sensor, I have created a small L-shaped bracket to bring the sensor to the side of the printer so that I can load it…

Downloads
608
Likes
91
Rating
4.5
P
PrintablesImOutOfSpace

Tyrannous saurus rex (T-Rex) 3D puzzle

Dinosaur 3D puzzle of a T-Rex in 24 items. Printed flat on bed and glued together. Design is based on thingiverse.com/thing:21315, however the STL was in assembled form and I wanted them in separate pieces. So I cut them out in blender.…

Downloads
606
Likes
103
Rating
5
P
PrintablesHedo3D

Green Lantern - luminous

my son ask for a green lantern luminaire, that can switch on when the ring comes near here are the result I designed many parts that can be glued together. Support printing is only needed for the half spheres, I don't know if other…

Downloads
589
Likes
137
Rating
5
P
PrintablesSUNLU

Luminous Fox Mask_SUNLU

This luminous fox mask was designed by SUNLU, using SUNLU PLA Matte, PLA Meta, and PLA Glow In The Dark filaments. Inspired by traditional fox masks, this design incorporates modern 3D printing technology for a unique and appealing look.…

Downloads
587
Likes
223
Rating
0

(2 of 4) Flashforge Adventurer 5M (AD5M) IMPROVED, SIDE-MOUNT Spool Holder, Inlet, Runout Sensor Mount! v2.1.1

FAQ Q: I printed your enclosure and I can’t figure out how to install the filament sensor / spool holder. I’ve looked on YouTube for installation videos and still stuck. Any help would be greatly appreciated. A: Not long after the initial…

Downloads
577
Likes
39
Rating
5
P
PrintablesBirdbrain

Birdbrain's axial flux synchronous motor prototype project

This is a repository of .stl files that were used in the creation of a prototype axial flux synchronous reluctance motor. The video showcasing the motor can be found here: https://www.youtube.com/watch?v=SNQVJudd6BU Since the reluctance…

Downloads
571
Likes
37
Rating
0
P
PrintablesJames J

Filament Runout Sensor w/ Basic Klipper Config

Attached PDF contains documentation on how to wire a Filament Runout Sensor using micro switch and a LED indicator for using with any 3D Printer control board, such as a RAMPS. Documentation contains basic configuration info for use on…

Downloads
528
Likes
15
Rating
0
P
Printablesstew675

Stew's "Good Enough" Calibration Cross for the Qidi Plus 4

Introduction In a sea of various calibration models, I present a very easy to use, and free, calibration cross model that will get your Qidi Plus 4 as well tuned enough for dimensional accuracy as it practicable. Why do I say this? Almost…

Downloads
524
Likes
81
Rating
5
P
PrintablesBaldrik

K1C runout sensor side mount.

If you want to mount your filament spool on the side of the K1C, you are still left with the runout sensor and the feeding of the filament at a very bad place, still on the back close to the printer. So I designed this very simple bracket…

Downloads
522
Likes
47
Rating
5
P
Printablesaleprint

Ender 3 V3 SE Mount for Filament Runout Sensor

Ender 3 V3 SE Mount for Filament Runout Sensor. Using the same screws that come with the sensor. Amazon Sensor (I use it with OctoPi - Raspberry Pi)

Downloads
514
Likes
60
Rating
5
P
PrintablesPavouk106

Creality Ender-3 V3 KE filament spool and runout sensor replacement holder

If you print from dry box, you don't need that tall spool holder anymore. But you still want runout sensor and this new holder/adapter will allow you to use the sensor in the original placement while cutting off the tall tower above it.…

Downloads
504
Likes
56
Rating
5
P
PrintablesJarda Linek

Luminous alphabet

LED Strip luminous alphabet

Downloads
496
Likes
65
Rating
5
P
PrintablesSilencedFrost

UBBI mount for Elegoo neptune filament runout sensor

UBBI mount adapter for Elegoo stock filament runout INSTALLATION GUIDE 🤩 Do you like the design? You can help fund innovations like this! Consider supporting me! Much appreciation given to my supporters, and you get exclusive access to…

Downloads
481
Likes
75
Rating
5
P
PrintablesClay Rade

Gelatinous Cube

A Gelatinous Cube draws near! 28mm scaled, so it will take up the standard 2x2 inch grid spacing a Large creature would. Both a standard version and a Dragon Quest slime variant are included, because why not? Edit: There was a request for…

Downloads
480
Likes
72
Rating
5
P
Printablesstevehlau

Filament Runout Sensor Enclosure

I am looking for a filament runout sensor enclosure that fits my Omron micro switch. However, none of them I like and fit. So I just go ahead a create my own. Print instructions Category: 3D Printer Parts

Downloads
479
Likes
63
Rating
4.75
P
PrintablesArturis

Sprite Ribbon Cable Support and Filament Runout Sensor Mount

After upgrading my Ender 3 Pro to the Sprite Pro hotend/extruder combo, I wanted to find a better way to support the cable and keep it out of the way. All the solutions I found out there had the ribbon getting mounted to the original…

Downloads
468
Likes
40
Rating
0
P
Printablesjblakey

Ender3 V3 KE Filament Runout Sensor Bracket

A simple bracket for directly mounting the filament runout sensor to the Ender3 V3 KE instead of using the filament holder. Prints fast, and fits fine. The mounting hole might need a little reaming out in order to press-fit the metal…

Downloads
465
Likes
36
Rating
5
P
PrintablesPeter Farell

Art Nouveau Planter

Art Nouveau Planter / Cup

Downloads
454
Likes
157
Rating
5
P
PrintablesKRIVOBRK

Voron filament runout sensor

Description Formbot filament runout sensor with modified holes for M10 threaded fitting connectors. Print Settings Nozzle: 0,4mm Layer height: 0,2mm Perimeters: 3 Supports: No Infill: 15%+ Material: ASA/ABS/PETG

Downloads
443
Likes
84
Rating
5
P
PrintablesNick Exposito

WristWatch G2 Filament Runout Sensor

This is a mod to use a switch as a filament runout sensor on WristWatch. BOM: 1 x Omron D2F 1 x 5.5mm Ball Bearing1 x Omron D2F 2 x M2x10 Self-tapping Screw Wires You will need the other parts to finish the assembly from:…

Downloads
443
Likes
66
Rating
5
P
PrintablesItsTyIRL

Ender 3 s1/Sprite pro better fan snout and relocation

New fan shroud I designed to allow for the best airflow to the nozzle and be adjustable for volcano/non volcano setups. This allows for the use of the existing lower screw that used to be to hold the fan in place and now be used as a…

Downloads
439
Likes
44
Rating
5
P
PrintablesHenlor

Creality Filament Runout Sensor CAD

Disclaimer : this model is a work in progress and it may contain some dimensional inaccuracies. This model is meant to be used as an asset in CAD software. I don't recommend to print this model as it is. It's not optimized for FDM…

Downloads
439
Likes
58
Rating
5
P
PrintablesYodog

Creality K1 Extruder with Filament Runout Sensor (SHC M2x8mm screw)

Created the provision to use a standard SHC M2x8mm screw to attach the switch.

Downloads
438
Likes
76
Rating
0
P
Printablesytpewpew

Sovol SV08 Filament Runout Sensor Mount

I needed a mount that fit my runout sensor and allowed a PC4-M6 pneumatic adapter for a bowden tube running from my filament dryer. Uses factory screws for the upper spool mount and the factory screw for the runout sensor mount. EDIT:…

Downloads
436
Likes
61
Rating
4
P
PrintablesBreakmate

SV06 Plus filament runout mount

This takes the Bowden Tube mount and adjusts the hole to place the filament runout sensor closer to the extruder.

Downloads
429
Likes
86
Rating
5
P
PrintablesTyler Durden

Filament Runout Sensor Bracket for Sovol SV04

The bracket moves the filament run out sensor, down 20mm, forward 20mm, and tilts it towards the filament roll. This reducing the friction the filament runout sensor adds because the original orientation has the filament enter at too much…

Downloads
424
Likes
51
Rating
4.89
P
Printablesbulbasaur0

Filament runout sensor extruder mount for Sovol SV06 Plus

Move your Sovol SV06 Plus filament runout sensor from the spool to the extruder with this mount! Placing the sensor closer to the extruder reduces filament wasted at the end of a spool, and frees up space on the gantry for a dual filament…

Downloads
417
Likes
84
Rating
5
P
PrintablesBuildX

#0199 Star Wars Fanout Card Case [ Galactic Empire ]

*** Thanks for checking out this model! *** If you appreciate what I'm doing, buying me a coffee would be a wonderful show of support! Good quality designs take time, skill, and CAFFEINE! ;-) And then check out my other models for…

Downloads
411
Likes
107
Rating
5
P
Printablesrussdogg

Filament runout sensor

Some of the other filament sensors weren't working great for me so I made this one. Space to fit some PTFE in each end to prevent the PLA from eating away at the print.

Downloads
409
Likes
64
Rating
4.67
P
PrintablesKev608

Creality K1 Runout Sensor Side Mount

Being used with this model to route the reverse bowden tube out the back.

Downloads
406
Likes
28
Rating
5
P
Printablesadamo000

Sherpa Mini Extruder with PICO MMU Runout filament sensor

You would need to print: Shepa Mini Extruder adapter - only one part and swap from the original (5x M3x5x4 inserts needed for the whole mod) 4 lane adapter with runout sensor (I've printed one from transparent PET) Important information:…

Downloads
399
Likes
87
Rating
5
P
PrintablesRagingLibrarian

Ender 3 V3 KE Runout sensor holder

If you screw off the backplate of the sensor, it will fit in the enclosure. You can optional shorten the tube on the top, like I did.

Downloads
397
Likes
53
Rating
3
P
PrintablesOlivier Popiers

La Linea de Nouvel An

Un petit rappel de notre enfance avec la Linea d'Osvaldo Cavandoli. You can buy me a Tea (i do not like coffee ;) ) here https://ko-fi.com/olivier3dprint

Downloads
381
Likes
56
Rating
5
P
PrintablesEmbrace Making

Two Trees SP-5 BL Touch Mount, Runout Sensor Mount, Strain Relief, Bowden Guide, Mainboard Cover

Several easy upgrades for the Two Trees SP-5 (Sapphire Plus) as shown in the video below: Bowden Tube Guide (will need 2x M4x10 and 2x M4 T-Nut) Filament Runout Sensore Mount (will need 2x M4x10, 2x M4 T-Nut, 2x M3x20) Hot End Strain…

Downloads
375
Likes
20
Rating
0

Gang of Worms - Chewie, the gluttonous worm

Chewie is the most gluttonous worm, passionate about all foods! Apples, zucchini... he loves it all. If you meet him, hide your snack! The Gang of Worms is a series of toys for boys and girls, quick and easy to print, suitable for gifts…

Downloads
374
Likes
62
Rating
5
P
Printablesnuadarstark

Ender 3 Filament Runout Sensor

A simple filament runout sensor made from re-used Ender 3 endstop. You gain the endstop by upgrading to an ABL probe. This remix is built on the OG model, just wanted to have a “floating” version of it, as my setup doesn't allow me to use…

Downloads
368
Likes
62
Rating
5
P
Printablesdmarting

Filament Runout Sensor Enclosure (Micro-Switch)

This is filament sensor enclosure. The filament sensor use a PTFE tube to guide the filament. A cut in the PTFE tube expose the filament to a micro-switch with ball bearing. This should keep the friction to the filament to minimum even…

Downloads
368
Likes
29
Rating
5
P
Printablesoosharkyoo

Elephant Plant Pot with Drainage Snout

This model is a remix of Pezmc's relephant plant pot. I liked the idea of the raised platform letting the plants stay above water at the bottom, but then I noticed that the nose was plugged in that remix which could hurt plants in the…

Downloads
366
Likes
66
Rating
5
P
PrintablesArs Moriendi 3D

Gelatinous Cube Dice Guardian

This little hungry friend comes in two version: A pretty display base and a Mythic Mugs screw lid, which has threads that fit into any of our Mythic Mugs or dice boxes (for example the free Lion's Brew or Merchant Mug). The Gelatinous…

Downloads
365
Likes
79
Rating
5
P
PrintablesSolomoriah

Creality Filament Runout Sensor Housing

EDIT 1/1/2023: After using the slip-fit housing for a while, I began to get annoyed at how easily a slightly kinked filament would push the Bowden tube out of the housing. I did some looking and found DenialE's Bowden coupler, meant for…

Downloads
364
Likes
47
Rating
5
P
PrintablesKelev

Gelatinous cube - D&D Miniature (Supportless/FDM Friendly)

Behold the Gelatinous Cube, the silent janitor of the dungeon world! This transparent terror glides through corridors, absorbing everything in its path with the grace of a particularly hungry vacuum cleaner. Don’t be fooled by its jiggly…

Downloads
358
Likes
58
Rating
5
P
PrintablesOrzOrzOrz

Elegoo Neptune 4 and 4-Pro Runout Sensor Holder

Alternative holder for the runout sensor in case the original filament holder is not used. Update 11.12.2023: Added a second version for the non-Pro Neptune. If you appreciate what I've designed so far, feel free to buy me a coffee!…

Downloads
357
Likes
51
Rating
5
P
PrintablesDavid Relich

Simple filament runout sensor (using Ender 3 endstop switch)

Not much to tell, really. Needed a filament runout sensor on my Klipper-based corexy machine. This one's using a standard Ender 3 endstop assembly (microswitch and 3 pin connector on a PCB) because I had a few sitting around from the good…

Downloads
355
Likes
57
Rating
5
P
PrintablesSilencedFrost

Optical filament runout sensor

The stock runout sensor that uses a spring and some bearings got too much resistance, and limited my extruding capability! so I made this optical version, that's smoother, lined to the teeth with ptfe tubing Very “clear” shortcoming…

Downloads
349
Likes
89
Rating
4.88
P
Printableshotbrass2005

Table Saw Runout Gauge

This is a simple tool that lets you use a dial indicator from Harbor Freight to measure table saw runout. You'll need a 1/4" hex bot and nut to assemble it. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No…

Downloads
345
Likes
107
Rating
4
P
PrintablesDominic

Improved Voron Stealthburner Filament Runout Sensor Mod

Compared to previous mods, this is a more reliable version of the filament run out sensor for the Voron Stealthburner Clockwork 2. By using a microswitch with lever, the filament is reliable detected, avoiding false sensor readings. It is…

Downloads
340
Likes
86
Rating
5
P
PrintablesCAtFabUK

Elegoo Centauri Carbon RunOut Sensor Wire Hole Cover

Overview Cover for the hole in the side panel used for the run out sensor wire and plug. Clips into place with a cutout for the sensor wire. I printed at 0.16 layer height in PETG

Downloads
339
Likes
38
Rating
5
P
PrintablesThomas White

K1/K1C/K1 Max/Ender 5 S1 filament runout sensor mod

This mod corrects a filament path issue due to the bearing and the ~9mm gap for using that bearing. Note: Creality uses this same sensor on other printers like the Ender 5 S1 and maybe others, so this should fix the same problem. K1 Max…

Downloads
336
Likes
78
Rating
0
P
PrintablesLithicDesign

Art Nouveau Hair Comb Replica

This is a replica of an old art nouveau era hair comb design that I modeled in Blender. I used antique gold silk PLA, but I think any brown or natural toned PLA would also look nice since these combs were hand carved in horn and bone at…

Downloads
333
Likes
117
Rating
4.67
P
PrintablesBaldrik

Creality K1/K1C runout censor side mount

For mounting the runout sensor on the side for easy access.

Downloads
327
Likes
27
Rating
2.5