Search results: nys

Sort order

140 models

P
PrintablesJona B

Two Bunnys (Easter decoration)

When looking for Diyable easter decoration i didn't find anything, which i liked. I could only find an image of something similar to this. As there wasnt any Instructions or files, I just made something similar and this is the result. i…

Downloads
2,779
Likes
938
Rating
4.93
P
PrintablesDonpilkerton

Vannystyle Truerc Matchstick

Dual antenna mount for the Vannystyle frame. Meant to be used with the Truerc Matchstick 65mm version. .f3d is included so feel free to remix!

Downloads
50
Likes
1
Rating
0
P
PrintablesLuboš Hejč

Kohout ke kanystru

Při slicování hlásí zvážení zapnutí podpěr. Není potřeba

Downloads
20
Likes
1
Rating
0
P
PrintablesBooks

Per Molts Anys Decoració de Pastissos

Decoració de pastissos "Per Molts Anys" Per més decoraciós, consulteu la meva col·lecció Agency Cake Decoration .

Downloads
12
Likes
2
Rating
0
P
PrintablesToon

TinySkatepark finger board park

Fingerboarding is so much fun, this project allows you to print a modular skatepark. All models are made with 3d printing mind so no small features or difficult overhangs. All parts are compatible with each other. Combine and mix…

Downloads
1,834
Likes
152
Rating
4.92
P
Printablesgadjet

Stand for TinySA ULTRA Spectrum Analyser

A simple stand to hold a TinySA ULTRA, there is a slot at the bottom to allow a rightangle USB C charge cable through but this may not fit your specific cable. This is a work in progress and I plan to create another one with a different…

Downloads
304
Likes
17
Rating
0
P
PrintablesJace1969

Destinys Titan Full Body Armour

Another great file found on the internet and converted to a printable format. Sizing will need to be looked at but the overall project will just need slicing up to fit your printer. Should be a great costume, Cheers Jace Print…

Downloads
288
Likes
75
Rating
0
P
PrintablesDeadlisins

Easter Bunnys With Eggs Decoration

Scale to your own desire! Commercial License Available on my Patreon- patreon.com/Deadlisins Check out my Profile for more Prints! This 3D-printed Easter decoration features an elegant silhouette design with two adorable rabbits sitting…

Downloads
284
Likes
49
Rating
5
P
PrintablesOutFoxD

IKEA NYSJÖN feet

IKEA NYSJÖN: https://www.ikea.com/at/de/search/?q=NYSJ%C3%96N

Downloads
245
Likes
19
Rating
4.5
P
PrintablesSitsero

Dionysus Bust

🍇 Dionysus Bust – The God of Wine, Ecstasy & Revelry 🍷 Bring the spirit of celebration, mystery, and divine indulgence into your collection with this Dionysus Bust ! Recognizable by his long, flowing hair and the wreath of grapes and ivy…

Downloads
219
Likes
42
Rating
0

tinySA Ultra+ rugged box

First version of a rugged box for the tinySA Ultra+. The lid is designed for the blue 30cm version, 2 of them fit in the lid. They might not stay in so I jam a bit of foam on top of it. I haven't figured out how to design it so that it…

Downloads
207
Likes
14
Rating
4
P
Printablesjeepin95

NanoVNA and TinySA Box

With some inspiration from a few other box designs I made my own semi-rugged box to contain my NanoVNA and TinySA together and keep them a little protected. I integrated a ledge for the tray to sit on which helps to hold the devices in…

Downloads
186
Likes
23
Rating
0
P
PrintablesDamianB2

tinySA ULTRA Stand and Stylus

This is a tiltable stand/holder for the tinySA ULTRA spectrum analyzer. The tinySA ULTRA is a very nice spectrum analyzer but is designed to lay flat. This stand allows you to tilt it to make it easier to use on the bench. It tilts from…

Downloads
170
Likes
15
Rating
4.5
P
PrintablesEmemell

tinySA Ultra desktop stand

The tinySA Ultra neatly pops onto this stand, held in place by small lugs that fit into the screw holes on the back of the device. It leaves all the controls accessible and has enough clearance for a small USB C cable at the bottom. Make…

Downloads
148
Likes
13
Rating
0

Kitchen knife block (Denys version)

I bought a new knife and my current holder is not suitable. Was looking for something which is easy to print and small, but found that most of the ready models are made of a single piece for 6-10 hours printing and usually take a lot of…

Downloads
129
Likes
43
Rating
5
P
PrintablesSilson07

Matice na kanystr. Canister nut.

Matice na kanystr. Canister nut.

Downloads
127
Likes
11
Rating
0
P
PrintablesLighting

Nálevka pro kanystr se zavitem DIN45

Nálevka pro 5l kanystr se zavitem DIN45 / pro nalévání kapaliny do hazerů a mlh samostané víčko je možné použít i jako držák trychtýře rozměry víčka : 45mm vnitrni průměr , 32mm díra pro nálevku a trychtýř Tisk: Material : PETG výplň :…

Downloads
122
Likes
10
Rating
5
P
Printablesyduf

Anyshape Stackable Container

Build customizable stackable container from anyshape. Default shape is rounded rectangle, but could be changed to anything you like (writing a shape with openscad code). I used it to design small container for drawer, for sorting screws.…

Downloads
120
Likes
26
Rating
5
P
PrintablesJeroen3

TinySA Ultra box inlay

Simple inlay to keep using the original TinySA Ultra box to store it in. Update 2024-09-10: added 5mm offset top insert, so you can keep your sma adapter attached.

Downloads
117
Likes
13
Rating
5
P
PrintablesJoergH

TinySA ULTRA Gridfinity Einsatz 2x4u4

Gridfinity Einsatz um den original TinySA ULTRA gut und sicher zu transportieren. Der Einsatz ist durch die Gyroid-Füllung weich, bietet aber noch genügend halt. Gridfinity 2x4u4. Passt gut in eine Box 3x4u6 Filament: TPU polymaker…

Downloads
112
Likes
16
Rating
0
P
PrintablesNoozle3D

Vannystyle Frame Accessories

3D print files for the Vannystyle.

Downloads
105
Likes
9
Rating
0
P
PrintablesFlynn

NYS Business card embosser roller

***NOTE*** I removed my name "FLYNN" from these files, so it is just a NYS Card embosser with room on the top if you wish to make custom roller with your name on top Print 1 of all STL files except handle Print a 2nd STL file of gear 1,…

Downloads
105
Likes
38
Rating
0
P
PrintablesStefan Junger

tinySA Ultra Hülle/Etui

Das Etui ist etwas länger um einen “Opfer-Adapter” nutzen zu können. SMA-Anschlüsse verschleißen leider recht schnell. Daher schraube ich grundsätzlich einen weiteren Adapter dazwischen um die Lebenszeit am Gerät zu erhöhen. Zum Drucken…

Downloads
95
Likes
6
Rating
0
P
PrintablesEnrico

Vannystyle Frame DJI O3 Camera Mount V2

These Plates can fit the DJI O3 Camera without using Standoffs in the front. Only need M3 Nuts and Screws in the front.

Downloads
94
Likes
4
Rating
0
P
PrintablesSkenna_fpv

Vannystyle Pro Parts

Vannystyle Pro Parts A collection of special parts I use for the Vannystyle Pro frame. Print settings 20% Infill Gyroid Infill Pattern Support On (choose the kind of support form you'd like) Recommended Brim On

Downloads
89
Likes
2
Rating
0
P
PrintablesJayJay

IKEA NYSJÖN - High cabinet feet

IKEA NYSJÖN - High cabinet feet

Downloads
88
Likes
5
Rating
5
P
PrintablesPetr

víčko ke kanystru

ztratil jsem víčko , třeba dodat šroubek m4 s velkou hlavoupřípadně podložkou, možno doplnit o Okroužek 35x3

Downloads
85
Likes
7
Rating
5

Vannystyle o3 pack (WARP)

Для установки крепления камеры o3 потребуется: 4 плавленые втулки M3 высотой 4 мм и диаметром 4,2 мм цианоакрилатный клей. Байонет o3 TX предназначен для ресивера Happymodel EP1Байонет Vista предназначен для ресивера EP1 и антенны Rush…

Downloads
85
Likes
3
Rating
0
P
PrintablesPenny Blake

Pennys Filament Measuring Ruler

While I found the original model excellent I thought this could be improved slightly, so I added the following Big hole so that it can be hung up when not in use. Curved bottom so it registers better on the spool with no wobble Viewing…

Downloads
80
Likes
25
Rating
0
P
PrintablesSupernova

tinySA Basic Enclosure — Slim 2-piece, no supports, uses original screws

Description A tidy, low-profile enclosure for the tinySA Basic . I couldn’t find a non-bulky case, so I designed this one as two halves that print without supports and reuse the tinySA’s original screws to assemble. It keeps the footprint…

Downloads
79
Likes
7
Rating
0
P
PrintablesViper

Dionysos Bust – Greek God of Wine Mythology Statue STL

Dionysos Bust is a detailed 3D printable statue inspired by the Greek god of wine, celebration, theatre and wild nature. The model features Dionysos holding a chalice , with flowing hair, a floral vine wreath, classical draped robes and a…

Downloads
75
Likes
13
Rating
0
P
Printablesywabiko

TinySine Bluetooth Enclosure v2

(Update 4/12/2019) Uploaded IGES model files for easier remix. This is an updated enclosure for TinySine Bluetooth receiver board series. Improvements: Support for a push button implemented on some boards (to receive calls etc). Quick…

Downloads
71
Likes
1
Rating
0
P
Printableskrab

Canister lid - Víčko na kanystr

Version 1 Version 2 Version 3

Downloads
68
Likes
8
Rating
0
P
PrintablesDeeuutee

Glennys Chair

This is a modern recreation of the classic style of minimalist armchair. Either print the cushions and frame separately (no need for AMS), or print all in one colour. It is a one tenth scale chair.

Downloads
67
Likes
12
Rating
4
P
PrintablesPURI

easter_bunnys

set of different sized easter bunnys NEW! the obj. file is now included

Downloads
66
Likes
16
Rating
5
P
PrintablesKatFret

Drawer 'woven' Hexagon basket for IKEA NYSJÖN high cabinet

Model This is a drawer and/or basket with a honeycomb decoration for the IKEA NYSJÖN high cabinet. Ideal for bathroom organization such as those pesky loose towels, deodorant cans, cotten wipes, tubes of toothpaste, dental floss.. You…

Downloads
66
Likes
18
Rating
0
P
PrintablesPaŠe

Box for tinySA Ultra Spectrum Analyzer

A box for spectrum analyzer and accessories

Downloads
66
Likes
7
Rating
0
P
PrintablesJakub

Fuel can holder scale 1:10 / Držák kanystrů

Držák kanystrů na zadní dveře vašeho vozu. Držák obsahuje dvě montážní plochy s dírou 3,2mm pro přichycení kanystrů nebo vaflí. V horní části se nachází držák spz. Rozměry celku: 55v x 63š Lze kombinovat s kanystry a vaflema které jsem…

Downloads
66
Likes
26
Rating
0
P
PrintablesTommy

Víčko pro kanystr na benzín + úchytka

Tisknuto v PETG a doporučuji 100% výplň. Mělo by odolat účinkům benzínu. Úchytka tisknuta ve FLEX materiálu.

Downloads
65
Likes
3
Rating
0

Nyssara Venomkiss, Dark Elf Assassin | 32mm & 75mm Fantasy Miniature | FDM & Resin

Nyssara Venomkiss is the silent blade of the Dark Elf court, an assassin whose name is whispered only after the killing is done. Where soldiers march beneath banners and sorcerers command the battlefield, Nyssara works in the spaces…

Downloads
63
Likes
7
Rating
0
P
PrintablesUgly Robot

Working Pennyshot Derringer Toy

Scrooge's Shotgun, The Door Knocker, Lincoln's Revenge - the Pennyshot Derringer! A 'working' derringer toy from the videogame Hunt Showdown - a clever, homemade-looking last resort. This does not fire anything - just a fun fidget. The…

Downloads
61
Likes
8
Rating
0
P
Printablesamulej

RonnyS 7" Touchscreen case for Raspberry Pi 4 + internal fan original screws

Loved the design of RonnyS but didn't have any M2.5 x 16mm screws and wanted to use the original ones that came in the box, so I modified the fan part to accept those. Print without supports

Downloads
60
Likes
4
Rating
0
P
Printablesyduf

Anyshape Stackable Container + Separator

Add separator for small quantity. Category: Tool Holders & Boxes

Downloads
58
Likes
4
Rating
0

Tanystropheus

Long-necked Triassic archosaur relative.

Downloads
54
Likes
11
Rating
0
P
PrintablesBucuCZ

Kanystr (canister) 1:10

Kanystr na expediční auta v měřítku 1:10, je ze 4 částí, které je potřeba slepit. Nejsou potřeba žádné podpěry. Ideálně tisknout co nejmenšími vrsvami aby vyšli hezky kulaté části.

Downloads
52
Likes
12
Rating
5
P
PrintablesDoubleH

Knysna South Africa 3D Map

3D Topographical map of the Knysna in South Africa. This model has exaggerated topography to make the counters stand out a little more. The code includes a color change to allow the water to stand out from the land.

Downloads
52
Likes
10
Rating
0
P
PrintablesAlex G

Volantex Phoenix 2400 Sunnysky motor mount

This is a custom motor mount designed specifically for Sunnysky x3120, although i guess it will also fit any other sunnysky motor. This is intended to be used with stock metal plate & screws so you dont need to drill anything. Note that…

Downloads
50
Likes
4
Rating
0
P
PrintablesTincdron

TinySA ULTRA Gridfinity

TinySA name box, pre-configured Gridfinity drawers, carrying handle. M3x40 carry handle screws. Filament: PLA

Downloads
49
Likes
4
Rating
2
P
PrintablesMortymore

TinySA Ultra and NanoVNA-F unfoldable stand

Printed in PLA (0.2mm), pint-in-place and no supports needed, it was designed to fit inside the instruments case and to be a simple stand. The difference between the 2 options is that the stand specialy intended for the TinySA Ultra+ has…

Downloads
47
Likes
6
Rating
0
P
PrintablesSkittles

SunnySideUp QSMP

sunnysideup from qsmp

Downloads
47
Likes
1
Rating
0
P
PrintablesKyler Henson

Vannystyle DJI o3 antenna mount

All the o3 antenna mounts ive found for this frame are off center and hit the props, so ive designed these 3 Vannystyle/Vannystyle pro Dji o3 antenna mounts. print with 100% infill No supports 1 angled o3 antenna mount with spot for a…

Downloads
46
Likes
3
Rating
0
P
PrintablestorusJKL

IKEA NYSJÖN - LILLÅNGEN laundry cabinet legs/feet

A leg similar to LILLÅNGEN for a NYSJÖN laundry cabinet. The foot is much shorter than from Ikea as I don't need it to be elevated that high. I printed it with the base plate down and 5 perimeters to get maximum strength on the axis that…

Downloads
43
Likes
2
Rating
0
P
PrintablesRoland Deschain

Holder for the TinyS3 development board from Unexpected Maker

I was hacking a Halloween decoration and needed a way to mount a TinyS3 as double sided tape wasn't cutting it. Insert the board under the clips on the USB side and then snap down on the antenna side to secure the board. This may also…

Downloads
43
Likes
3
Rating
0
P
PrintablesMINIX MASTER

egg cup two bunnys

egg cup two bunnys

Downloads
42
Likes
12
Rating
0
P
PrintablesTwig

Grannysquare stretcher

This is a grannysquare stretcher to adjust the elastic form of grannysquares to make it easier to assemble the squares into e.g. a blanket. Put the pins through the knitted/crocheted square and leave it for a few hours to let it set.

Downloads
41
Likes
12
Rating
0

Organic door handle for Ikea NYSJÖN.

This is a door handle for Ikea NYSJÖN as the one that Ikea provides is tiny and not really useful. This is an improved version, that enhances the usability of the furniture, and it adds an original touch to it.

Downloads
37
Likes
6
Rating
0
P
PrintablesLost

Bunnysus (Bunny Unicorn with Wings)

My daughter wanted a unicorn bunny with wings. So I mixed these two models together and voila!

Downloads
35
Likes
9
Rating
0
P
PrintablesKleber Gouveia

TinySA Ultra+ Box Insert

Design inspired in the LiteVNA64 box insert, but completely redesigned to optimize printing time. It has 2 versions of the bottom insert: without and with divisions.

Downloads
34
Likes
4
Rating
5
P
Printablesweak

TinyS3 USB-Stick (ESP32-S3)

A small case to convert a TinyS3 to a USB-Stick. Handy for all kinds of home automation, eg. as Nuki Hub . BOM: Part sources are just examples… QTY Part Source 1 TinyS3 TinyS3 1 USB-C gender changer (male to male) Amazon 4 M3 x 3mm heat…

Downloads
34
Likes
5
Rating
0
P
PrintablesAviv haas

Sunnyside up / UFO Frisbee

I love Frisbee, but I struggle with performing stunts and tricks. That's why I created these Frisbee designed to make throwing and performing tricks easier for the user. Printed in TPU with supports Printed in ender 3 s1 pro Make sure…

Downloads
34
Likes
28
Rating
0
P
Printablescommodorium

SkinnySkim Protein Skimmer

A small airpump powered protein skimmer that I designed for my pico-marine tank. The airline goes into the base and into a limewood airstone. There's a cup to capture the skimate which incorporates an overflow hose barb. The overflow hose…

Downloads
33
Likes
1
Rating
0
P
PrintablesJosé Pedro

Iron Dionysus Classical Statue 3D Printable

Transform your space with this breathtaking classical statue that brings ancient Roman artistry to your 3D printer! This meticulously detailed STL model captures the timeless elegance of the Iron Dionysus of Tivoli, featuring flowing…

Downloads
31
Likes
3
Rating
0
P
PrintablestheFPVgeek

Vannystyle Armguard - Skid

Vannystyle armguard & skid combo inspired by Brain3D's version Category: Other

Downloads
29
Likes
1
Rating
0
P
PrintablesZeciortech

Senyszyn's korale (neck beads)

Senyszyn's korale (neck beads) On 1st photo there is clean, just printed model, after that I just put on it car transparent spray and it looks amazing

Downloads
25
Likes
5
Rating
0
P
PrintablesMonsieur-Pierre

Ben Tennyson | Ben 10 3D Model

💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre Bring the legendary hero Ben Tennyson from Ben 10 to…

Downloads
25
Likes
3
Rating
0
P
PrintablesJV

Screwable funnel for 5l jerrycan (trychtýř na kanystr 5l)

Easy print without supports from PLA. Make sure the lower path has enough infill otherwise the thread can break sooner or later. Designed for jerrycans from Bauhaus ( https://www.bauhaus.cz/kanystr-na-vodu-stohovatelny-22852126 ) but the…

Downloads
24
Likes
4
Rating
5
P
PrintablestheFPVgeek

Vannystyle Action 2 Mount with ND Filter Slot

Vannystyle Action 2 Mount with ND Filter Slot REMIXED from design by PhiveOne_FPV Category: Other

Downloads
22
Likes
2
Rating
0

ZSD Nysa logo grill

Emblem for front grill

Downloads
22
Likes
1
Rating
0
P
Printableszolstarym

Tinysine TSA6179B bluetooth module enclosure

I had to file the rca holes down a little to get it to fit, and it was still a tight fit, so you might want to make those holes a little bigger (about .2mm diameter bigger might work?). A little filing was needed for the button holes, but…

Downloads
22
Likes
0
Rating
0
P
PrintablesRod Holland

Anysize T-Joint Assembly Jig | Cabinet Clamp

I'm a big advocate of openscad. It's a parameterized coding language for 3d printing. Well you might not be able to code, I assure you Claude can code openscad like nobody's business. I had a bunch of tokens and an agent to test, so I…

Downloads
21
Likes
2
Rating
0
P
PrintablesJailenmo

ROM Dionysus Bust 3D Scan

A photogrammetry 3D Scan of the Dionysus bust from Greece gallery at Royal Ontario Museum. Cropped the pedestal off and replaced with a small circular base for added stability. Scanned with Polycam Photogrammetry tool for free.

Downloads
20
Likes
5
Rating
0
P
Printablesywabiko

TinySine Bluetooth Receiver Enclosure

Updated version is posted here. TinySine Bluetooth Enclosure v2 This is an enclosure for TinySine Bluetooth Receiver Board @Amazon. TinySine Bluetooth レシーバー TinySine Bluetooth Receiver Board @Amazon 用のケースです。 Print Settings Printer: QIDI…

Downloads
20
Likes
3
Rating
0
P
PrintablesJeff

motor mount for sunnysky brushless motor

motor mount for sunnysky brushless motor

Downloads
19
Likes
2
Rating
0
P
PrintablesRichie

Klíč povolovací na kanystry - 5 l / Canister opening wrench – 5 L

Otvírák určený pro 5l kanystry, navržený pro snadné a bezpečné povolení i velmi pevně utažených uzávěrů. Usnadňuje manipulaci a šetří sílu při otevírání. Opener designed for 5 L canisters, intended for easy and safe loosening of even very…

Downloads
18
Likes
1
Rating
0
P
PrintablesRod Holland

Anysize L-Corner Assembly Jig | Cabinet Clamp

Openscad corner jig for assembling cabinets, and other wooden box structures. Everything is parameterized and commented so you can set it for the size you want, half inch 3/4 inch, even 18 mm : ). I included the 3/4 and half inch *.stl 's…

Downloads
18
Likes
2
Rating
0
P
Printablesbillygoat

ANYSECU / QYT 9900 Mount

I lost the metal mount that came with my Anysecu/QYT 9900 ham radio. There are two designs to choose from, one for the heat sink fins to be facing out, the other is the reverse with the fins facing the base. Both are spaced so there is…

Downloads
17
Likes
1
Rating
0
P
PrintablesBidiversity

atinyshellscript voron 2.4 AWD double sheer support

****NOT TESTED YET***** ANY FEEDBACK IS MUCH APPRECIATED AND TRY AT YOUR OWN RISK Added double sheer to atinyshellscript's AWD requires longer M3 screws, M3x35 instead of M3x30 Requires: 3x m3 nut 3x m3 x 8mm screws 1x F695 flange bearing…

Downloads
17
Likes
8
Rating
0
P
PrintablesPrawny

Easter Bunnys Day Out

It will soon be the Easter holidays and the bunny’s will be out celebrating. This easter the bunny’s are spending it down at the beach catching some well earn’t rest. They have the choice of jumping onto the boats and racing across the…

Downloads
17
Likes
10
Rating
0
P
PrintablestheFPVgeek

Vannystyle - GoPro Hero 11 Mini Mount

Vannystyle - GoPro Hero 11 Mini Mount Thanks to Pokey FPV for providing the GoPro Hero 11 Mini top Check him out at: https://www.youtube.com/c/PokeyFPV TWO versions available: 1 - Side Load and vented 2 - Clam Style (CINEMATIC USE ONLY )…

Downloads
15
Likes
2
Rating
0
P
PrintablestheFPVgeek

Vannystyle Front Bumper

Vannystyle front bumper inspired by Brain3D's version Category: Other

Downloads
15
Likes
0
Rating
0
P
PrintablesMiller-97

IKEA NYSJÖN - mirror cabinet adapter

Isn't it frustrating when your IKEA NYSJÖN cabinet doesn’t open all the way? Not anymore with this adapter! Gain more than 2 cm of extra space, making your toiletries more accessible and your life easier. Simply replace this adapter with…

Downloads
15
Likes
1
Rating
0
P
PrintablesSurfalex2000

3d Scanned Wood Bunnys (Hand Carved)

3d Scanned Wood Bunnys (Hand Carved). Maybe you like them. I also uploaded each of every one of them separately

Downloads
15
Likes
1
Rating
0
P
PrintablesTheVoronModder

Wansview 1080p Camera mount for aTinyShellScript 2.4

Rhastlyn's Wansview 1080p camera mount works well if you want top mount, if you want a bottom mount for your 2.4 with aTinyShellScript's AWD conversion / mod then you need this mount. Print, mount camera to the printed part then install…

Downloads
15
Likes
2
Rating
0
P
PrintablesDan Cun

Hidden IKEA Mirror Mount - NYSJÖN Mirror

These are custom mounting brackets designed specifically for the £12 ($15) IKEA Nysjön mirror. Printed so that the mirror slides in from the top, no supports needed when printing. The original mirror comes with a small integrated shelf…

Downloads
13
Likes
1
Rating
0
P
Printablestyler

tinySA Ultra Small Travel Box

lid printed in TPU. bottom is in PLA. desinged to match my nano VNA case: https://www.printables.com/model/1131776-nano-vna-small-travel-box

Downloads
13
Likes
3
Rating
0
P
Printablesoyvindl

Spacer for IKEA Nysjön feet

A simple spacer for the feet included with IKEA's Nysjön cabinet. I somehow lost one of the included spacers, so I had to make my own.

Downloads
12
Likes
1
Rating
0
P
PrintablesMaJa

2020 anysize inner corner

Wanted to make a box corner, for one corner you need 3 L_plates and one inner_corner. You need to replce connection_plates.scad from the original 2020 T-Slot any-size plates and rod holders with the connection_plates_2.scad. Print…

Downloads
12
Likes
4
Rating
0
P
PrintablesDaniCzech

Páka na kohout kanystru

Manželka měla problémy s otevřením kovového kohoutu kanystru na pitnou vodu. Pravda že tento kohout nebyl pohodlně otvíratelný ani pro mě a potřeboval jsme rychlé řešení, aby rodina na chatě neumřela žízní, když odjedu do práce. Takže…

Downloads
12
Likes
0
Rating
0
P
PrintablesAsBurli

SunnySky Angel Quick Release Adapter for DJI Props

Mit diesen Adapter können die klappbaren DJI Propeller für die MAVIC Pro einfach mit den Sunnysky Angel Motor verwendet werden. Attention: The adapter has not yet been tested extensively in flight Category: R/C Vehicles

Downloads
12
Likes
0
Rating
0
P
PrintablestheFPVgeek

Vannystyle Front Bumper

Vannystyle front bumper inspired by the Brain3d version Category: Other

Downloads
11
Likes
0
Rating
0
P
PrintablesHainsilma

Focal Hadenys headband

Overview This is a more comfortable strap for my Hadenys headphones. It both helps avoid hotspots on my head and also protects the fabric from getting dirty too quickly. The variants I made 4 variations of the theme - the shorter variants…

Downloads
10
Likes
0
Rating
0
P
PrintablesRexlabanane

Vacuum cleaner adapter piece Electrolux Serenys Tornado

Replacement part for Electrolux Serenys Tornado vacuum cleaner. This part is located between the machine and the hose. Print in PLA at 30° to maintain flexibility in the locking clips and strength between layers. Should work in PTEG also,…

Downloads
10
Likes
0
Rating
0
P
PrintablesMichaël Fortin

IKEA NYSJÖN Mirror Cabinet Smaller Door Stopper

The provided IKEA parts that go behind the mirror doors prevent them from being opened as wide as they could. This model fixes this.

Downloads
9
Likes
1
Rating
0
P
Printablesflip2bits

Sunnysky X V3 Spinner Cover (x2212, x2216, x2220)

This is a spinner cover that goes over the metal spinner provided with sunnysky 2212, 2216, and 2220 X v3 motors. The metal cover is tiny compared to the diameter of the motor let alone a typically cowling front. This cover fits over the…

Downloads
9
Likes
2
Rating
0
P
PrintablesArasti

Thierra Verde - klíč na povolování kanystrů 5l

Povolovací klíč na kanystr 5l od Thierra Verde. Doporučené nastavení tisku: PETG 0,2 mm výška vrstvy 3x perimetr 20% výplň

Downloads
9
Likes
0
Rating
0
P
PrintablesCNES

TinySat by TAS

=== English version below the French description === Description (French version) Vous pensiez être imbattable sur les tailles de satellites ? Pico, nano et autre micro n'ont pas de secret pour vous ? Et bien nous sommes heureux de vous…

Downloads
9
Likes
1
Rating
0
P
PrintablesABG3D

aTinyShellScript AWD Y Endstop Mount

Voron Trident/2.4 aTinyShellScript AWD/2WD Y Endstopmount Model origination: I have aTinyShellScript 2WD plates on my Voron 2.4 350 and did not find a suitable Y endstop mount. I used another from a firend but I lost about 4mm in Y travel…

Downloads
9
Likes
2
Rating
0
P
PrintablesSmokintbird

TinySA cover

This is a fairly simple case or cover to protect my Tiny SA while it is being carried in the tool bag.

Downloads
8
Likes
1
Rating
0