Search results: odul

Sort order

16,814 models

P
PrintablesLR3DUK

Fast-Printing Modular Drawer System (Vase Mode)

Hi Everyone: I originally posted this design for a fast-printing modular drawer system on Thingiverse, but quite a few people suggested that I also post it Printables (I can see why. Printables runs so much smoother and the support is…

Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant

Downloads
48,029
Likes
19,529
Rating
4.83
P
PrintablesSneaks

Modular Snap Together Raspberry Pi 2B/3B/3B+/4 Case w/ OLED & Fan Options

Compatibility: This case design is compatible with Raspberry Pi's 2B/3B/3B+/4. It may be compatible with other models, however, these were the ones I was personally able to test it on. Two Top Depths: (01/06/2022) The top half is now…

Print approx. €4.15–€5.07 excl. taxPreliminary estimate for one variant

Downloads
22,705
Likes
5,392
Rating
4.92
P
Printablesfivesixzero

Case for Flipper Zero Wi-Fi Module v1

Simple protective case for the Flipper Zero Wi-Fi Module v1 development board. Flipper Zero Wi-Fi Board Docs: https://docs.flipper.net/development/hardware/wifi-developer-board Models Available: Full Case Requires 4x M3 screws/nuts for…

Print approx. €0.60–€0.73 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
18,167
Likes
1,126
Rating
4.93
P
PrintablesMiguel M.

Tape Dispenser, Multi-size/Modular

This is a Modular and multi-size tape dispenser. I first designed this as a single size (3/4in) non modular dispenser, held together with screws. The comment I got the most was : were are the other sizes? I refined the design, corrected a…

Print approx. €1.02–€1.25 excl. taxPreliminary estimate for one variant

Downloads
8,814
Likes
4,733
Rating
4.89
P
PrintablesPredy

MAD - Modular Air Duct for BIQU H2 / H2 V2S REVO / H2 V2S Lite / & E3D VOLCANO mod

Support my work +++ I will do my best to maintain and improve the project with incremental upgrades, but maintenance takes time and effort. If you wish to support my work and motivate me please consider to give me a donation +++…

Print approx. €1.07–€1.31 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
6,378
Likes
644
Rating
4.9
P
PrintablesLadousek

TriStar Stackable Modular Organizer – 200×150×75 mm

📦 Description This storage box is designed as a universal, lightweight, and durable container, available as a small family of height variants. All versions share the same footprint and design language, differing only in height to better…

Print approx. €9.58–€11.71 excl. taxPreliminary estimate for one variant

Downloads
2,755
Likes
838
Rating
3
P
PrintablesE3D

Revo Connect ~ A modular system for storing Revo nozzles

MODEL DETAILS Modular, customisable nozzle holders for RapidChange Revo nozzles. Mounting options for different printers can be found on our Printables profile. Size Information: Each Revo Nozzle is engraved with its size. It can be found…

Print approx. €0.75–€0.92 excl. taxPreliminary estimate for one variant

Downloads
2,693
Likes
351
Rating
4.86
P
PrintablesMossi Brossi

Modular Self Watering Planter - Endless Expandability !

Back Story Of This Design: I wanted to push my skills with 3D modelling and put my green thumb to use so I decided this would be a great place to start on expanding my skills at making nicer looking models in CAD. This planter is designed…

Print approx. €2.77–€3.39 excl. taxPreliminary estimate for one variant

Downloads
2,596
Likes
859
Rating
4.67
P
PrintablesOut Of Marbles

Bucket Lift - Modular Marble Machine - Motorized

We are soon launching a KICKSTARTER ! Assembly documentation can be found here: https://outofmarbles.com/pages/docs You can also purchase a Hardware Kit for our Marble Machines. It will come in handy if you do not want to source the parts…

Print approx. €3.70–€4.52 excl. taxPreliminary estimate for one variant

Downloads
2,346
Likes
582
Rating
4.96
P
PrintablesRebelScum

Modular Crawler Course RC

First attempt at building a modular course. made it free for anyone else looking to build one on a budget. Should work great for 24 and 18 scale crawlers. I printed mine without supports and 0 infill to speed up the printing time and save…

Print approx. €2.16–€2.64 excl. taxPreliminary estimate for one variant

Downloads
2,094
Likes
228
Rating
4.75
P
PrintablesViermalbe

Gridfinity Modular Drawer Remix

A remix of the great Gridfinity Modular Drawer System by Chipp Walters that saves 37% of filament, reduces print time and is also less challenging than Hexagon pattern remix by soulbrotherb. I added small stops for the trays, so that they…

Print approx. €12.31–€15.05 excl. taxPreliminary estimate for one variant

Downloads
2,014
Likes
535
Rating
5
P
Printablessternli27

Bosch Professional 18V Battery Adaptor Adapter Module

This battery adapter is used in multiple of my other designs. For Makita 18V Batteries, see my design here: https://www.printables.com/model/436132/ For Milwaukee M18 Batteries, see my design here:…

Print approx. €4.30–€5.26 excl. taxPreliminary estimate for one variant

Downloads
1,988
Likes
239
Rating
4.6
P
PrintablesJerrari

Gen2 Large Modular Tilt Drawers (LEGACY)

A new generation of the popular Lack Tilt Drawers . The Gen2 Large Modular Tilt Drawers is a part of the GEN2 Modular Storage System I designed which features a simplified installation method that allows you to rearrange and customize…

Print approx. €7.14–€8.73 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,874
Likes
454
Rating
4.75
P
PrintablesDaveDude

Balcony Strawberry Tower with IKEA Persillade Modular Hydroponic

Features Modular structure, easily scalable, put modules together, twist & lock, done Filling module with cap 3-way planting modules (hollow version recommended) Internal/external water dispenser modules Lid Custom net pot for Jiffy-7 41…

Print approx. €0.47–€0.57 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,760
Likes
497
Rating
4.75
P
Printablesthelaguna

Matchbox modular toy car garage

What: Modular, foldable garage for toy cars, up to 43x43x94 mm Why: It helps you to keep your sanity around your kids. Or it's a way to store your own collection. How: Print it Fold it Fix it with a few pieces of leftover filament - heat…

Print approx. €5.31–€6.49 excl. taxPreliminary estimate for one variant

Downloads
1,639
Likes
448
Rating
5
P
PrintablesOut Of Marbles

Twister - Modular Marble Machine

We are soon launching a KICKSTARTER ! You can also purchase a Hardware Kit for our Marble Machines. It will come in handy if you do not want to source the parts yourself. While we ship the critical parts, you will 3D print the rest of the…

Print approx. €1.52–€1.86 excl. taxPreliminary estimate for one variant

Downloads
1,571
Likes
202
Rating
5
P
PrintablesAsraff Amzani

Modular Peggy Panel

We all have many tools lying around and often we put them either in drawers or just being messy at the table. I liked this idea because of the slotted design that don't require very complex geometry to mount the pegs or anything to these…

Print approx. €5.65–€6.90 excl. taxPreliminary estimate for one variant

Downloads
1,505
Likes
332
Rating
4.73
P
PrintablesOut Of Marbles

Triple Twister - Module

We are soon launching a KICKSTARTER ! This is an interchangeable module that fits on all of our marble machines that take modules. The rest of the modules are available on our website . Sneak peek of the rest of our modules that fit on…

Print approx. €2.68–€3.28 excl. taxPreliminary estimate for one variant

Downloads
1,483
Likes
120
Rating
4.87
P
PrintablesDarius V

Modular Sliding Shoe Size Ruler (EU/US)

This 3D printable shoe sizer features a two-part sliding design that measures foot length in both EU (left) and US (right) sizing systems. The base unit covers up to EU size 27. For larger feet up to EU size 46, simply print the optional…

Print approx. €1.71–€2.09 excl. taxPreliminary estimate for one variant

Downloads
1,407
Likes
760
Rating
5
P
PrintablesMadebyA2

Hexagon A4 Paper Tray - Modular Design

Another project that is a bit over the top to solve a very not over the top problem. Cool thing is though you can build it as high as you want and it is definitely very strong! When I was designing this, I thought it made sense to cut the…

Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant

Downloads
1,335
Likes
713
Rating
4.85
P
Printablesberk

Modular Wine Rack

This design is inspired by the GustaVino wine rack that you can read more about at http://www.gustavino.co.uk/. After having purchased this design, I was not satisfied with a number of elements: The print quality was poor due to the need…

Print approx. €3.67–€4.48 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,271
Likes
225
Rating
4.92
P
PrintablesTrocheHole

KP3S — Modular 4010/5015 Fan Shrouds with BLTouch Mount — Kingroon

Modular print head ASSY for Kingroon KP3S 3.0 with Titan Extruder and 4010/5015 fans. Notes on Model Files Please download just the STL file of the 5015 fan shroud from the “KP3S — Modular 5015 Fan Shroud — Kingroon” page. This 5015 fan…

Print approx. €2.66–€3.25 excl. taxPreliminary estimate for one variant

Downloads
1,216
Likes
248
Rating
5
P
Printablessternli27

Makita 18V Battery Connector Adaptor Adapter Module

This battery adapter is used in multiple of my other designs. For Bosch 18V Professional Batteries, see my design here: https://www.printables.com/model/427974/ For Milwaukee M18 Batteries, see my design here:…

Print approx. €4.45–€5.44 excl. taxPreliminary estimate for one variant

Downloads
1,086
Likes
109
Rating
5
P
PrintablesDominik

Christmas tree - modular

Looks good with 1 or 5 levels. 5% infill is enough. Buy me a coffee

Print approx. €1.71–€2.09 excl. taxPreliminary estimate for one variant

Downloads
1,040
Likes
162
Rating
5
P
Printablesmhparsons

Modular Wine Rack

This is a modular wine rack system that can be assembled to create many different configurations. I have included a number of different configurations in the photos section, but don't let that constrain you. This system can be expanded…

Print approx. €0.71–€0.87 excl. taxPreliminary estimate for one variant

Downloads
965
Likes
590
Rating
4.86
P

Low-Poly Koenigsegg Jesko Absolut - Modular Cars

Low-Poly model of a 2024 Koenigsegg Jesko Absolut. Included are two Bodies, one with headlights and one without, functional double-arm suspension, Print-In-Place wheels, and three different rims to adorn your wheels. This record breaking…

Print approx. €10.92–€13.35 excl. taxPreliminary estimate for one variant

Downloads
931
Likes
97
Rating
5
P
PrintablesMartinRowan

ZimaBoard Modular 1U Rack

Modular 1U Rackmount for ZimaBoards , to be co-located with Raspberry Pi and OpenUPS2. The design provides 5 “slots” to make up the 19" rack, which can be made from a combination of single and double-width holders which are secured…

Print approx. €1.08–€1.32 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
924
Likes
164
Rating
4.8
P
PrintablesOut Of Marbles

Bucket Lift - Modular Marble Machine - Handcranked

We are soon launching a KICKSTARTER ! Assembly documentation can be found here: https://outofmarbles.com/pages/docs This is the hand-cranked version of our bucket lift. Check our other models for motorized version. You will also need to…

Print approx. €4.68–€5.72 excl. taxPreliminary estimate for one variant

Downloads
854
Likes
100
Rating
4.75
P
PrintablesSteveT

Modular Wine Rack

NOTE: Step files now uploaded This is a very strong and stable wine rack that can be made to hold as many bottles of wine you require. Start off with a small rack and then add to it at any stage as your wine collection grows (if you don't…

Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant

Downloads
834
Likes
197
Rating
5
P
PrintablesTiago Jesus

Case (with inserts) for Flipper Zero Wi-Fi Module

I combined both styles of the original model's case as I preferred it this way. Both STL and STEP files are provided. The case needs short M3 brass inserts like these . You need to drill the m3 holes on the lid, as I included a layer so…

Print approx. €0.42–€0.52 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
830
Likes
80
Rating
4.92
P
PrintablesTWB

Modular Traffic/Construction Cone (Tabletop Miniatures)

Modular design, you can achieve various sizes and functions by swapping different components - with more additional parts to be introduced later. Suggested print settings (for Prusa machines, others may need some tweaking): Layer height…

Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant

Downloads
827
Likes
421
Rating
4.83
P
PrintablesJCW

Stronger modular hinge

[EN] This is a reinforced version of my modular hinge. I needed a more rigid hinge for my purpose. The FreeCAD file is included as usual. Details for assembly look here: https://www.prusaprinters.org/prints/58767-modular-hinge [DE] Das…

Print approx. €0.76–€0.93 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
726
Likes
91
Rating
4.33
P
PrintablesKatarn

Modulcaster - Stratocaster - a modular 3D-printed guitar with swappable styles

Create your own customized electric guitar effortlessly with this modular design. Inspired by the original Prusacaster and using the Harley Benton Electric Guitar Kit T-Style from Thomann too, you can easily swap parts to change the…

Print approx. €3.27–€4.00 excl. taxPreliminary estimate for one variant

Downloads
706
Likes
180
Rating
0
P

Low-Poly Porsche 911 Turbo - Modular Cars

Low-Poly model of a 1974 Porsche 911 Turbo 930. Included are functional double-arm suspension, Print-In-Place wheels, and three different rims to adorn your wheels. This classic German sports car is at roughly 1:25 scale. Tolerances may…

Print approx. €8.03–€9.81 excl. taxPreliminary estimate for one variant

Downloads
673
Likes
106
Rating
5
P
PrintablesJeepingJohnny

Prusa MK3S Ultimate ToolBox V2! Modular!

V3 Now available redesigned Bigger and Better! https://www.prusaprinters.org/prints/127748-prusa-mk3s-ultimate-toolbox-v3-bigger-and-better ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~…

Print approx. €12.80–€15.65 excl. taxPreliminary estimate for one variant

Downloads
556
Likes
151
Rating
4.91
P
PrintablesNick Esselman

Modular HexaHive with links

Introducing the Hexahive: an insect hotel designed in the optimal shape of a hexagon. This model provides a welcoming shelter for beneficial insects in your garden or outdoor space. Using M3 screws to mount to any wall I recommend…

Print approx. €12.66–€15.47 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
552
Likes
433
Rating
0
P
Printablesemisticg

Modular Moss Pole for Climbing Plants (Modułowy palik do mchu dla roślin pnących)

PL: 🪴 Modularny palik do mchu dla roślin pnących 📖 Opis ogólny Ten kompletny zestaw modułów palika do mchu został zaprojektowany z myślą o wspieraniu i przyspieszeniu wzrostu pnączy roślin typu Monstera , Scindapsus , Epipremnum ,…

Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant

Downloads
496
Likes
109
Rating
5
P
PrintablesSB

H0 Scale Jersey Concrete Barrier – Modular Road & Construction Barrier for Model Railways

The model is inspired by modern real-world Jersey barriers and focuses on clean geometry, realistic proportions and easy integration into different layouts. The barrier is modular , allowing you to print and place multiple segments side…

Print approx. €0.29–€0.35 excl. taxPreliminary estimate for one variant

Downloads
434
Likes
48
Rating
5
P
PrintablesEgon

Print approx. €0.58–€0.71 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
394
Likes
38
Rating
5
P
Printablescsweichel

Modular Wallet: Slimfast Edition

Adds an Apple AirTag and space for cash, without adding much in thickness (4mm for the AirTag, nothing for the cash). This remix adds space for an AirTag on the top plate, uses some of the thickness of the bottom plate to add space to…

Print approx. €1.82–€2.23 excl. taxPreliminary estimate for one variant

Downloads
379
Likes
69
Rating
5

Moss pole / climbing aid (modular)

You can stack up multiple modules on top of the ground anchor and optionally add moss inside the modules for plants which need the moisture. I recommend to print in PETG. The module should be printed with the detents up or with brim…

Print approx. €1.13–€1.38 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
373
Likes
80
Rating
4
P
PrintablesOBA

H0 modular Concrete Bridge Pillar System pluggable / H0 modulares Beton-Brückenpfeiler Stecksystem

Motivation When bulding a temporary model railway bridge or ramp, you need pillars with various sizes. Using Lego for this purpose did not look too realistic. For this reason I designed a pluggable model railway pillar system, that allows…

Print approx. €11.72–€14.32 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
372
Likes
47
Rating
0
P
Printablesvolly

Case for EBUS-to-WiFi-adapter-module

I created the case to have the module ("EBUS to WiFi adapter module" by Daniel Kucera) protected from dust. You may buy the module here: https://lectronz.com/products/54 In the correct orientation all the parts can be printed without…

Print approx. €0.10–€0.12 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
354
Likes
8
Rating
4
P
Printablesmikedmor

Original Prusa Enclosure: Modular Transport Handles (with Grips)

Presenting the Modular Transport Handles - a remarkable blend of practicality and versatility, specially designed for seamless operability. This combination remix ingeniously integrates the gripped version of transport handles with an…

Print approx. €6.83–€8.35 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
325
Likes
47
Rating
5
P
Printablesaverageram

Modular Pedalboard

This is my first design to share. It's an effects pedalboard designed to allow for expansion so that it's just the right size for all your pedals. I'm currently using 2 A sections on my desk as a mini pedalboard. The cross pieces are the…

Print approx. €0.09–€0.11 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
317
Likes
39
Rating
5
P

Low-Poly Audi Sport Quattro - Modular Cars

Low-Poly model of a 1984 Audi Sport Quattro S1. Included are two Bodies, one with headlights and one without, functional double-arm suspension, Print-In-Place wheels, and three different rims to adorn your wheels. This legendary German…

Print approx. €7.84–€9.58 excl. taxPreliminary estimate for one variant

Downloads
291
Likes
43
Rating
5
P
Printables_KaszpiR_

18650 charger via HW-373 TP4056 USB-C module

About Quick and ugly remix to allow charging 18650 via HW-373 TP4056 USB-C module, which has larger diameters. The external dimensions are the same. Lithium Battery Charger Li-ion Module TP4056 USB C mock up was used to alter original N…

Print approx. €0.06–€0.07 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
278
Likes
39
Rating
5
P
PrintablesDom Cis

HEXAGONAL MODULAR SHELF / STRUCTURE FOR PRUSA RESEARCH MAKER FAIRE PRAGUE BOOTH

Printed CORNERS for the hexagonal shelf we had on Prague Maker Fair 2018. We used it to display printed models. 10x10x160mm Aluminium sticks are used for prisms. Prisms are secured by hot glue sticks (of course, what else...). All the…

Print approx. €12.18–€14.89 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
243
Likes
89
Rating
0
P
Printables3D-maker

modular raspberry pi 4b case

modular snap fit case for the raspberry pi 4b, no screwa needed and you can print it in different colors.

Print approx. €1.28–€1.57 excl. taxPreliminary estimate for one variant

Downloads
238
Likes
11
Rating
3
P
PrintablesGodnamedThor

Jigsaw holder for modular wallmount

Jigsaw holder for my modular wallmout system. Baseplate and description: https://www.printables.com/model/202771-modular-wallmount-system-for-various-powertools

Print approx. €5.84–€7.14 excl. taxPreliminary estimate for one variant

Downloads
221
Likes
40
Rating
0
P
PrintablesGuido666

Stand for Blink Sync Module 2

A small stand for the Blink Sync Module 2. Prints with no supports. Print with 3+ perimeters, so that the walls are solid. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.20mm Infill: 15%…

Print approx. €2.84–€3.48 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
210
Likes
16
Rating
4
P
PrintablesJoe

Gridfinity Refined Hammer Holding set (misc hammers), modular

These hammer pieces are for holding various hammers that i have. hopefully the sizes fit for you. they are modular. I use these flat bins to fill in the voids. Individual I have 4 hammers - - 2.5lb ESTWING sledge - 2-1/2" rubber mallet…

Print approx. €13.19–€16.13 excl. taxPreliminary estimate for one variant

Downloads
209
Likes
26
Rating
5
P
PrintablesAdudino

Etagere Collection - Parametric étagères / Serving Stands. Modular Etagere / Serving Stand

Timeless parametric (many sizes) model of various étagères to choose from. A perfect addition to the nutcracker model (which is also nice and easy to print). - highly print-optimized. - each form ca be easily split in slicer to remove the…

Print approx. €3.82–€4.67 excl. taxPreliminary estimate for one variant

Downloads
198
Likes
63
Rating
5
P
Printablesclement0635

Touch wall switch for TTP223 touch sensor module

This model is not difficult to print, but it is rather difficult to use. First, you need a TTP223 touch sensor (very cheap on Amazon) that will fit nicely in the center of the switch. Then you need to solder a 28awg wire to the sensor in…

Print approx. €1.57–€1.92 excl. taxPreliminary estimate for one variant

Downloads
190
Likes
29
Rating
5
P
PrintablesOBA

Märklin H0 modular Bridge Rail-C R2-30° Element (multi part) / Märklin H0 modulare Brücke Gleis-C Element R2-30° (mehrteilig)

Motivation When building a temporary model railway bridge or ramp, you need pillars with various sizes. Using Lego for this purpose did not look too realistic. For this reason I designed a pluggable model railway pillar system, that…

Print approx. €0.71–€0.87 excl. taxPreliminary estimate for one variant

Downloads
182
Likes
22
Rating
0
P
PrintablesSimone Giordano

Raspberry Pi Camera Module 3 bed mount for MK3S

Oltre alle parti stampate avrete bisogno di 2 (due) viti a testa esagonale con filettatura M5 x 13 mm. Aggiornamento 07/09/2024 Aggiornati i seguenti files: Pi Camera Module 3 case - Front .stl Pi Camera Module 3 case - Back .stl Cradle…

Print approx. €0.43–€0.53 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
179
Likes
12
Rating
3
P
PrintablesNahoj86

Bigger Modular Filament Drawer System

Print and assembly is the same as the original model. https://www.printables.com/model/788433-modular-filament-drawer-system Printed in Prusament ASA I used 20mm aluminium pipes instead of PVC pipes:…

Print approx. €13.73–€16.78 excl. taxPreliminary estimate for one variant

Downloads
176
Likes
26
Rating
5
P
PrintablesSimonp

Fachboden für Fritzbox/Router und Keystone module 2 Wand

Hallo, habe im Internet so ein AVM Fritzbox Rackmount gesehen gehabt und fand das ganz cool also eben selbst eines gezeichnet. Habe auch für einen gekauften Fachboden, nur die Keystone Halter mit hochgeladen, und eine Kappe um die Löcher…

Print approx. €23.00–€28.11 excl. taxPreliminary estimate for one variant

Downloads
165
Likes
17
Rating
5
P
PrintablesMetikumi

Decorative, Massive, Modular Box

This design is not for everyone. 😅 A decorative and modular, but quite massive box. Built from 3d-printed parts, 5mm plywood panels and plenty of 3x10mm wood screws. The g-code files on this page will print all parts for a basic box with…

Print approx. €16.07–€19.64 excl. taxPreliminary estimate for one variant

Downloads
165
Likes
59
Rating
0
P
PrintablesDujinga

Modulair ring

Modulair ring, print one ring and change faceplate to your style or mood. Mix and match diffrent ring colors for endless combinations! Still a WIP. I will add more ornaments en more ring sizes! Print instructions Print as you like! No…

Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant

Downloads
160
Likes
47
Rating
5
P
PrintablesPetrD

Modular city roads set (cesty)

Project was put on hold for now because I lost the license to the software I was creating the roads in. But even so I think there is enough variants to create an interesting city network. A modular set of roads. The individual pieces can…

Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant

Downloads
159
Likes
25
Rating
5
P
PrintablesManny

Modular fishing stand

Modular fishingrod-stand First of all, I'm sorry for any errors within this text, as English is not my mother tongue. Completely printable object, material efficient, support-free design. This is not a small print and will approximately…

Print approx. €1.80–€2.20 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
159
Likes
36
Rating
0
P
PrintablesOBA

Märklin H0 modular Bridge Rail-C 172mm Straight Element / Märklin H0 modulare Brücke Gleis-C 172mm Element gerade

Motivation When bulding a temporary model railway bridge or ramp, you need pillars with various sizes. Using Lego for this purpose did not look too realistic. For this reason I designed a pluggable model railway pillar system, that allows…

Print approx. €3.64–€4.45 excl. taxPreliminary estimate for one variant

Downloads
152
Likes
17
Rating
0
P
PrintablesArtem

Adjustable rope shelf module

Adjustable rope shelf module A small module for an easy hanging shelf on a rope How to use ? You will need a M6 screw for block the rope into the module, you can lose the screw a little for adjusting the position

Print approx. €0.22–€0.27 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
145
Likes
195
Rating
5
P
PrintablesSB

Modular Interlocking Concrete Blocks – H0 (1:87) and 1:35 scale. Model Railway & Dioramas

This model represents a generic industrial interlocking concrete block system , inspired by real-world construction and infrastructure elements, commonly used for retaining walls, temporary structures, ballast containment, and industrial…

Print approx. €0.63–€0.77 excl. taxPreliminary estimate for one variant

Downloads
141
Likes
23
Rating
5
P
PrintablesArisBlocky

Modular Bird Automata

Blocky Codes modular blocks are capable to create many cool projects, To see the step by step guide please visit my tutorial on instructables.com

Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant

Downloads
125
Likes
40
Rating
0
P
PrintablesTheRCguy21

Walksnail Goggles X Extension Module Mount

Summary: A mount for the Walksnail Goggles X Extension Module. Mounts to the top of the goggles. Uses a two piece design leaving only a low profile mount when not using the module. With the low profile mount it still fits nicely in the…

Print approx. €1.21–€1.48 excl. taxPreliminary estimate for one variant

Downloads
117
Likes
15
Rating
0

Modular small parts drawers

EN: This is just another one of the many binders. However, this one is modular (one modul is 50x40x142 mm) and the printed parts do not need supports. Width = multiple of 50mm Height = multiple of 40 mm Depth = constant of 142 mm CZ: Toto…

Print approx. €0.08–€0.10 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
117
Likes
32
Rating
5
P
PrintablesPrintoptiontwo

Modular "table top" course for 1/30th scale RC crawlers

All of the course sections were developed for my 1/30th scale Axial SCX30 Chevrolet K10 pickup but they are probably suitable for other 1/30th scale crawlers. This video shows the course being driven. Everything was designed using Fusion…

Print approx. €0.28–€0.35 excl. taxPreliminary estimate for one variant

Downloads
113
Likes
30
Rating
4
P
Printablespressi

Print approx. €4.44–€5.42 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
112
Likes
21
Rating
0
P
PrintablesGuido

Modular Score Counter Remix

Modular Score Counter Remix This is a combination of three other counters I found, kudos to the original designers! The STL for the stem is designed for one slim middle piece, 5 number rings and 3 spacers. You need to print: 1x stem (with…

Print approx. €0.90–€1.10 excl. taxPreliminary estimate for one variant

Downloads
110
Likes
20
Rating
0
P
PrintablesAdam Fuchs

Krabička na modul TP4056 / TP4056 module box

Do krabičky se zacvakne modul a zdířky zašroubují, vrchní krytka se zacvakne. Gcode je udělaný na všechny díly, tedy obsahuje oba dva typy krytu. Kryt bez dírky je pro kompletní uzavření, ten s dírkou je tam proto, aby bylo vidět dovnitř…

Print approx. €0.78–€0.95 excl. taxPreliminary estimate for one variant

Downloads
109
Likes
18
Rating
0
P
PrintablesFranziska

Vitamin effervescent tablet modular holder/stand. Very small print. Fits most brands.

My effervescent tablet tubes kept falling over on the shelf, so I just needed something simple to keep them standing up. I remixed an egg holder to fit the purpose, allowing me to add as many holders as I need in various configurations. I…

Print approx. €0.28–€0.35 excl. taxPreliminary estimate for one variant

Downloads
107
Likes
16
Rating
5
P
PrintablesOBA

Märklin H0 modular Bridge Rail-C 188mm Straight Element (multi-part) / Märklin H0 modulare Brücke Gleis-C 188mm Element gerade (mehrteilig)

Motivation When building a temporary model railway bridge or ramp, you need pillars with various sizes. Using Lego for this purpose did not look too realistic. For this reason I designed a pluggable model railway pillar system, that…

Print approx. €1.16–€1.41 excl. taxPreliminary estimate for one variant

Downloads
103
Likes
7
Rating
0
P
Printablesqubiq

mLamp - modular and pivoted LED lamp

This is an LED table lamp made up of moving parts. The mobility of the parts allows the light to be directed in any direction. This lamp can be modified in various ways. You can adjust the base (for example, here is a photo of mounting…

Print approx. €1.71–€2.08 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
97
Likes
45
Rating
0
P
PrintablesKaurH

Stream Deck Module (32 Keys) Housing for DaVinci Resolve Mini Panel

This housing is for the new Stream Deck Module 32-key: https://www.elgato.com/ww/en/p/stream-deck-module-32-keys It's designed to sit at the same level and angle as the DaVinci Resolve Mini Panel. The Stream Deck Module simply slots in…

Print approx. €3.64–€4.45 excl. taxPreliminary estimate for one variant

Downloads
95
Likes
8
Rating
0
P
PrintablesOnelostcause

2 inch Modular Hitch Cover with Embedded Nuts

This is a remix of the Modular Trailer Hitch Cover by rkxone on Thingiverse. I've added an additional set of faceplate mounting holes for more options when designing faceplates. The m3 nuts are also embedded in the print. Stop the print…

Print approx. €4.69–€5.73 excl. taxPreliminary estimate for one variant

Downloads
92
Likes
18
Rating
0
P
PrintablesFoxytisy

Modular 3D Printed Nunchucks

This is a Modular Nunchuck. Print any size attachments and adjust the Nunchuck size. NOTE: First time screwing on the attachments could be a bit stiff. After some time it will get easier to screw on. This print is pre-sliced with…

Print approx. €1.23–€1.50 excl. taxPreliminary estimate for one variant

Downloads
92
Likes
21
Rating
5
P
PrintablesPaultier02

Modular Lamp with Magnetic Shades

A stylish lamp base designed to hold three interchangeable lamp shades, secured using 4x2mm magnets for easy swapping and customization. The sleek, modern design allows for quick adjustments and a unique look to match any room. Perfect…

Print approx. €7.13–€8.71 excl. taxPreliminary estimate for one variant

Downloads
89
Likes
33
Rating
0
P
PrintablesMetikumi

Anton Firsik's Forest-Themed Side Panels for the Modular Lantern

This is Anton Firsik's improved version of the forest-themed side panels for the modular lantern. I created various variants, from an easy two-colour to a complex five-colour print. The side panels can be printed on any 3D printer using…

Print approx. €5.88–€7.18 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
87
Likes
48
Rating
0
P
PrintablesM. H.

Brain decal modular remix for increased print size

Isolated the four individual traces for each of the four sides plus a center to slot them into. This makes it possible to print much larger (220% size on the Prusa Mini). I also added a center with a fake processor. Numbering is…

Print approx. €0.42–€0.52 excl. taxPreliminary estimate for one variant

Downloads
82
Likes
16
Rating
3
P
PrintablesCulinaryDiver

Modular Organizer for Kitchen & Bath with Draining Compartment

This modular organizer is designed to hold items like dish brushes, sponges, and other household essentials. Each 8×8 cm compartment can be configured with different container sizes (1/3, 1/6, 1/12 of the base) and heights (5, 10, or 15…

Print approx. €1.36–€1.66 excl. taxPreliminary estimate for one variant

Downloads
80
Likes
42
Rating
0
P
PrintablesJpell01

Modular Half Dozen Egg Holder

Use just one, or print out 2 and glue them together. Just a simple egg holder. First thing i designed in fusion 360 that wasn't just made of lines and accurately. Print with variable layer height for the best result. You could also put…

Print approx. €3.46–€4.23 excl. taxPreliminary estimate for one variant

Downloads
80
Likes
7
Rating
0
P
PrintablesMoreno

simple modular chain linkages

I made these for an other project, they are @cm long each and can be joined to other linkages.

Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant

Downloads
75
Likes
20
Rating
0
P
PrintablesBoros

Modular dog raised bowl

This model is designed to fit a Prusa MK4. You can use PLA for printing. For general infill, I suggest using 5%. However, for the joints, please use modifiers to increase the infill to 15% or 20%. I hope your dog enjoys it :)

Print approx. €6.43–€7.85 excl. taxPreliminary estimate for one variant

Downloads
70
Likes
22
Rating
0
P
PrintablesEskichagar

Rangement modulaire pour salle de bain / cuisine / autre - modular storage for bathroom / kitchen / other

Elément de rangement modulaire. A placer en position couchée, et à assembler selon la taille de rangement désirée. Impression en PLA.

Print approx. €10.69–€13.06 excl. taxPreliminary estimate for one variant

Downloads
69
Likes
16
Rating
0
P
PrintablesSancho

[Remix] Modular Watch Stand : Holder Medium Adapter for GW-M5610U-1 / G-Shock GW5xxxx

ENG Holder Adapter for G-Shock GW-M5610U-1, should be compatible with GW-5000U-1 and other GW-5xxxx models from G-Shock with similar rigid bracelet and shape. Original Model by @PRINTSY…

Print approx. €1.50–€1.84 excl. taxPreliminary estimate for one variant

Downloads
69
Likes
12
Rating
0
P
PrintablesCVD

RotoHook - a modular hook attachment for vertical posts

This rotational hook aims to bring new functionality to otherwise often unused parts of our homes and workshops. As stairs typically have vertical posts and are often located near an entrance, I see an opportunity to improve the…

Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant

Downloads
68
Likes
25
Rating
5
P
PrintablesOBA

Märklin H0 modular Steel Girder Bridge Rail-C 188mm Straight Element (multi-part) / Märklin H0 modulare Stahlträger-Brücke Gleis-C 188mm Element gerade (mehrteilig)

Motivation When building a temporary model railway bridge or ramp, you need pillars with various sizes. Using Lego for this purpose did not look too realistic. For this reason I designed a pluggable model railway pillar system, that…

Print approx. €0.83–€1.01 excl. taxPreliminary estimate for one variant

Downloads
68
Likes
10
Rating
0
P
PrintablesAndreas_O

Modular Bookshelf - Connector - Honeycomb wall storage

Printed on XL could be unstable on bedslingers. Printed with 0.4 Nozzle and PETG

Print approx. €1.84–€2.25 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
65
Likes
30
Rating
0
P
PrintablesMario M

Modular tubular things holder. Freecad Parametric!

This is again a fully parametric design. The FreeCad files are included. So you can make small or large boxes for different kinds of batteries or other cylinder shaped objects like rounds, lip balsem or whatever. There are ready to print…

Print approx. €0.93–€1.14 excl. taxPreliminary estimate for one variant

Downloads
63
Likes
7
Rating
0
P
PrintablesPerspektive3D

Sony FZ100 compatible insert for Rugged Box with Modular Slots

This is a insert for Sony FZ100 camera batteries and compatible versions. The insert is designed for the incredible Whity's Rugged Box. It can house two Sony FZ100 batteries. Use more of these inserts to house as many batteries as you…

Print approx. €3.70–€4.52 excl. taxPreliminary estimate for one variant

Downloads
63
Likes
12
Rating
0
P
PrintablesPetr Bojar

Wifi module cover R1 + USB for MK4S

The Prusa printers lack a USB port for connecting a camera or other accessories. I use this voltage converter from 24V to 5V with an integrated USB port.. Buck step down měnič DC - 6-24V, 12V/24V na 5V 3A USB The voltage converter is…

Print approx. €1.03–€1.26 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
59
Likes
7
Rating
5
P
PrintablesSJM

Airport Runway - Additional Runway Geo Orientation Module - For the bigger planes

Here some more runway modules for direction and order of the runway. L := left ; R := right ; C := center ; Numbers of degrees. I pumped up the runway tiles to 175% in width (175mm x 175mm) and 125% in height (2,5mm is stable enough) to…

Print approx. €3.18–€3.89 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
58
Likes
8
Rating
0
P
PrintablesYvesVO

Modular Minimal Pi Case with PiCam Case (MMPiC + PiCC)

Modular base for a Raspberry Pi - most large models... RPi 1, RPi2, RPi3 and RPi4 (tested). Extra additions can be made using a screw-on system. This set includes a PiCam Case with a small extension (reach is approx the reach of the…

Print approx. €1.38–€1.69 excl. taxPreliminary estimate for one variant

Downloads
58
Likes
7
Rating
0
P
Printablestickl

Modular cat toy/rod/stick adapters and attachments

Print the male2male long flat side down Print the female 2 female like a teardrop The long one can also be printed with flex or tpu to give that real wonky feel The grooves in each allow you to stick in a toy like a ribbon or a…

Print approx. €1.17–€1.43 excl. taxPreliminary estimate for one variant

Downloads
58
Likes
7
Rating
0
P
PrintablesRaQic

MMU spool holder - click in legs, modular

Very simple, but effective way to store your filaments under the printer itself and use them while printing on your MMU, no buffer needed. Legs are simply attached to your printer and you are good to go. Current design counts with silver…

Print approx. €14.65–€17.91 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
53
Likes
16
Rating
5
P
PrintablesJERRY

Elgato Stream Deck 32 + 6 Button Module Casing - SimRacing Button Box

The provided 3MF File is prepared with all my modifications. The Back Part needs Supports for Printing After Printing the Back Part, you need to punch through the 2layer supports for the M8 screw (if you want to use this Fixing Method) I…

Print approx. €4.04–€4.94 excl. taxPreliminary estimate for one variant

Downloads
50
Likes
9
Rating
0
P
PrintablesCannaCreator

Sliding Modular Whiteboard Drawing Templates

Now with sliding attachable sides! Now with Extension plates. New Coordinate frame plate I made this modular plate so it is possible to snap plates together with the peg-in-hole snap method. They can be used to quickly make todo list on a…

Print approx. €5.12–€6.26 excl. taxPreliminary estimate for one variant

Downloads
47
Likes
15
Rating
5
P
PrintablesSJM

Airport Runway - Additional CountDown Module - For the bigger planes

Here some more Runway CountDdown runway modules. I pumped up the runway tiles to 175% in width (175mm x 175mm) and 125% in height (2,5mm is stable enough) to fit the 1:144 airplane models for playing. Settings Value Infill 15% Perimeters…

Print approx. €3.19–€3.89 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
46
Likes
7
Rating
0