Cover for Olympus Battery Pack BLS-5 und BLS-50
A small cover which protects the electronic contacts: keeps electronic contacts clean and prevents short circuit.
- Downloads
- 62
- Likes
- 3
- Rating
- 5
272 models
A small cover which protects the electronic contacts: keeps electronic contacts clean and prevents short circuit.
Inspired by https://www.printables.com/model/1042882-pvm-20m2mdu-speaker-mounts but for Roland and Boss MA-12 monitors. Recommend only these models as they are magnetically shielded. There are a number of Boss MA-12 variants so ensure…
Our version of the Blade of Olympus for God of War video game franchise. This is a combo hard surface & organic (modeled & sculpted) design. Our friend @alumitube will be casting this in near future. This is our most detailed, favorite…
Many thanks to @bostandesign for the original design. I really appreciate your work. I added a cutout inside the column to discreetly store two spare batteries. Now, you'll always have spare batteries on hand when the original ones run…
The lever on the battery door of my Olympus em5 mkii broke, so what's a guy to do? Why, model a replacement, of course! I'm not sure if other Olympus camera bodies use the same lever or not, but it works with the em5 mkii at least.…
This is an adapter to convert lenses that use olympus om mount to the sony e mount, it should be printed with the olympus mount facing the bed plate.
Replacement Hot Shoe cover. I based the design on the Olympus OMD EM3 Mark II model. I included the Fusion 360 file so you can customize it if wiished Category: Camera
I designed the cap for when the camera is stored without a lens. The model is a multicolor design. It also can be printed without the letter by leaving the place empty (you just have to delete the three parts of the letter in the 3mf…
I think my Pen FT was dropped by a previous owner, breaking the viewfinder eyepiece where the cold shoe bracket mounts. Fortunately, 3D printing technology that the original designers never would've imagined allowed me to make a…
⚠ Commercial Use Notice: If you intend to sell physical prints of this model, please purchase the licensed version here: 👉 Buy the commercial license on Etsy 🔒 License Terms: This model is for personal use only. Commercial use (including…
Remix of adrian057 lens cap to subtract the Olympus font from the object. This makes the part easier to print without support and also looks great! Original post: https://www.thingiverse.com/thing:2737337 "This is a lens cap for the…
A replacement front, back and side grip for an E-M1 II, solving the pesky problem of the original rubber grip expanding and coming loose. Recommend printing in Nylon/CF. Includes integrated supports. I designed this by using a…
Not happy with all the missing parts on my Olympus, so I designed and printed them all. Battery door cover - took me 6 iterations to get it to the perfect dimension, also the fact I was printing with an old 3D printer, designed to match…
Lost the eyecup off of my camera, so I designed and printed a new one! Fits Olympus mirrorless camera models OM-D E-M10 MkII and the E-M5 MkII. Print instructions Because of the nature of the "slot" that is used to fix this to the camera,…
A little case that holds a few Ricoh GRIII / GRIIIx batteries (Ricoh DB-110 or Olympus LI-90b) The goal is just to hold batteries securely to protect the contacts and keep them from moving around awkwardly in a pocket or bag. I've tested…
Update 8/2/2025: After using this for several months and feeling like it looked slightly off, I re-measured and discovered that the rotation was off by about 1 degree 🤦. I've uploaded version 0 2 9 .stl's and blender files here which fix…
This is a remix of two lens hoods for the Olympus series, i just remixed them to fit the M.ZUIKO DIGITAL 40-150mm 1:4-5,6 o58 lens. One classic, one fancier. You can print both without supports, both prints need around 1h40min at a Layer…
Hello. I am publishing here my lens hood model for the olympus 75-300 II lens. I made the inner surface ribbed to reduce glare. I recommend painting the inner surface with black paint, for example with a permanent marker. Use it with…
Remix of Anachronism great HotShoe Cover. Added new OM Systems and Lumix logos to both for my cameras that needed hot shoes. These were printed in resin on an SLS printer. Fine details will required .25mm nozzle or SLS to get the results…
Adapted from the model by Molotovec on thingiverse. The original design wouldn't set the aperture control to Manual, wouldn't lock properly, and the thickness in the e-mount section was too thin for my new thick OM lens. Corrected all…
Lens cover for the Olympus PEN-F analog camera. Modelled after the original metal cap. It can be printed in two ways: The "F" facing up - depending on your printer, supports may be required Cut the model in half at around 5mm, with the…
Please use a not-so-stiff filament, like ASA or PETG, even flexibles work. I recommend using a very black and not so shiny filament. 0.15mm layerheight is also enough.
Small holder for the batteries of the Ricoh GR III / GR IIIx. The battery slides in easily and is held by a snap lock at the top. Getting a battery out is simple since you can push them out from the bottom. This remix covers the battery…
The Pen series of film SLRs does not have a built in accessory shoe, and the official accessory to add one is hard to find at a reasonable price. I've been selling these parts on Etsy and Ebay for a while, but I thought it was finally…
I've created a simple lens cap for Olympus 35RC. Fits with/without filters screwed in. Suggest printing from a flex like e.g., TPU.
I needed a replacement cover for the motor drive connection thing on my Olympus OM-4 Ti. I couldn't find a 3D model for it online (even though they're being sold on eBay for 16€?!) so I made one myself. Printed with PLA @ 0.1mm. Buy:…
This is a relatively low profile 49mm filter thread adapter for the OM System TG-7 and other Olympus Tough cameras. This lets you use the same filter size as you might use on a Ricoh GRIII, which can also use the same batteries……
There are two versions of the grip included. One is the export from Fusion360. The other has a leather texture (also uploaded) applied to the upper part of the grip (above 4.5 mm height and then specifically in some places). The grip…
I was too lazy to buy one, so I drew and printed it myself. I printed it out and verified it on my camera. But everyone's luck is different. Use at your own risk.
This is a relatively low profile 40.5mm filter thread adapter for the OM System TG-7 and other Olympus Tough cameras. This lets you use the same filter size as the default Olympus/OM System filter adapter CLA-T01. I suggest printing the…
Olympus BLH-1 battery case. Tight fit around the battery. Has an indicator hole so you can indicate whether it's charged. Slightly smaller than the original clear plastic case Much easier to use No thin plastic flexy clamp arms. Uses a…
Very simple model used for blacking out the meter on the Olympus 35 SP 35mm film camera. Not designed to be pretty, but it's functional. It leaves the rangefinder patch, bright lines, and meter window unblocked so you can still see those…
Enhance your gaming station with this refined 3D printable stand specifically designed for the PlayStation 5 DualSense controller. This "v2 cleaned" version offers a streamlined aesthetic with a sturdy base, providing a secure and…
Diffuser for the built-in pop-up flash on the Olympus OM-D cameras. Tested to work on OM-D E-M10 II, will probably fit other as well. Just slide it into the hot shoe and fire away. Can be taken on/off with flash either up or down. Print…
Obviously, it is a unforgivable sin to print this in anything other than “the iconic red shutter button”-red, or spray painting it afterwards, like i did. There a three versions with different tolerances. “smaller” is 0.2mm smaller in x/y…
🔒 License Terms: This model is for personal use only. Commercial use (including selling physical prints) is not allowed unless you purchase the licensed version from the Etsy link below. 👉 Buy the commercial license on Etsy 💖 Want to…
A very simple to print lens hood for the Olympus 12mm f2.0 lens.
Small holder for the batteries of the Ricoh GR III / GR IIIx. I made versions for 4, 2 and 1 batteries (although I don't see much use in a single battery version tbh). The battery slides in easily and is held by a snap lock at the top.…
A battery case for storing a pair of batteries. Three options to suit: BLX-1 for the Olympus OM-1 and OM-1 II BLH-1 for the Olympus E-M1 mk2 and mk3 DMW-BLK22 or DMW-BLF19 for the Panasonic G9 or G9 mk2. Uses a pair of 10x3mm magnet to…
it's a combination of an Olympus OM lens mount adapted to a Nikon F lens mount that i whipped up for my nikon d3000… there is two different versions included with slightly different mounts. i used version 2. i got it to fit with a little…
This adapter supports an Olympus TG-6 camera on the eyepiece of a microscope. The tube fits around the camera lens when the front-ring is removed to avoid any light leak. It can work with eyepieces from 26mm diameter and with the larger…
Two types of camera handles allow you to place the camera on your waist or head to maintain stability! Olympus E-PL5 gripper Added a second version for a more aesthetically pleasing appearance 两种类型的相机手柄,可让您将相机放在腰部或头顶,保持稳定性!奥林巴斯E-PL5夹持器…
I needed a replacement cover for the TTL flash socket on my Olympus OM-4 Ti. You can find some on eBay for 10€ that look nice and are 3D printed. But I couldn't find their 3D model online, so I made my own. It's not as pretty, but it…
Print Details: Overture PLA, Black .4 nozzle, .2 layer height 15% infill no supports I used 4 M3 16mm long screws to mount to the underside of my desk. DAC friction fits in the mount, and abuts the stop in the rear of the mount.
Lenscap and hood for the Olympus Pen S Category: Camera
A simple 1/4" 1/4-20 UNC female (camera mount) to M5 male thread adapter. This part gets lost very easily but it is required to fix Olympus LS-P2 to a tripod. Tested with PLA and it is strong enough to support the voice recorder. Of…
Convert an Olympus OM lens to L mount. No supports needed
Printed in PLA, but can be printed in PETG or TPU
Half grips are cool, if you have large hands like me. But they are almost impossible to find (or just do not existe OEM). I use one on almost all my SLRs and rangefinder cameras, so took the habit of designing mine. Here's the Olympus…
Lens protector cover for Olympus Pen EE lens camera. Print in TPU!
This is a replacement cover for the flash sync socket of the Olympus OM1 / OM1n film SLR camera Print with the flat face down on the build plate
A push-on filter adapter for 28mm filters, a lens hood, a lens cap that can be used with the filter/lens hood, and a flat lens cap with/without logo. The lens hood is inspired of the original one. If someone has the exact dimensions of…
Very basic lens cap for the Olympus Tough TG-6. This cap goes easily over the stock lens ring and tightens with a clockwise twist. No supports were necessary when printed on my Prusa MK3S with PLA filament. Fit was excellent. Print…
Used the Olympus BLN-1 Akku Holder by sef_77 as the basis for the batteries and added to jdegs filled-in boxes. Can store 2 batteries in a 1x1 space, or 4 batteries in 1x2.
I got a 2nd hand 12mm F2.0, and surprised the metal lens hood can cost up to 90 bucks. Therefore I feel motivated to design my own, and it turns out to be a perfect fitting on the first try. Please note that this was designed for my older…
Elevate your gaming setup with this sleek and functional 3D printable stand designed for the PlayStation 5 DualSense controller. This version features a cleaned design and an integrated base for stable display. It's perfect for keeping…
This is a pretty basic case for up to 3 LI-92b batteries. This lid snaps into place with the indents. The case is square, so the lid fits in any orientation. I printed with PLA with 0.2mm layers and 15% infill. Probably could do less…
This is a remix (combining of) 2 different STL Files. I did this using my very rudimentary knowledge of Tinkercad. www.thingiverse.com/thing:2985864 and www.thingiverse.com/thing:3417712 Two reasons for doing this is the first stl had…
This is a battery cover for the Olympus BLN-1 Battery cover. It is made to exactly fit with as less play as possile. Optimal print quality with .5 mm wall thickness and .4 mm solid infill (100%). Recommended to print with PLA and heated…
The idea for this thing came from watching YouTube videos made by Roger Hance who is an OM-Systems Ambassador in the UK. Roger is an accomplished photographer who I saw using a palm/hand grip on his Olympus M-Zuiko 150-400mm lens in order…
This is an eyecup for the Olympus OM-1 analogue camera.
A small and portable macro flash diffusor for the Olympus 60mm f/2.8 macro lens that attaches on the bayonet mount of the lens. It allows you to still attach filters and close up lenses. It also fits the Olympus 25mm f/1.8 lens, as they…
Battery case (and double-battery pack) for Olympus / OM Systems batteries BLX-1, BLH-1, BLS-1, BLS-5/50. One or other suits most OMD micro four thirds cameras. Includes one assembly with dual case (side-by-side) for BLH-1, just because…
This lens holder is designed specifically for the Olympus XA rangefinder camera. It accommodates a 43mm filter, which minimally obstructs the lower portion of the viewfinder, ensuring accurate framing while taking photos. The design…
An adapter for Olympus Pen F half frame camera bodies to take M42 Lenses, takes into account the flange distance so should focus just fine. Should work with most m42 lenses, has an additional step inside to press down the aperture blades…
Battery door lever for the Olympus E-M5 III because it keeps breaking for everyone!! Remixed from @myxfit_28243 's model to fit the E-M5 III instead of E-M5 II Notches are raised by 0.5 mm to accomodate the locking lug + spring see pic 4…
This is a lens hood for the olympus (m.zuiko) 45mm f1.8, using the bayonet mount. Feel free to make remixes that are perhaps longer or shorter, but this is my preferred size because it is easy to store and still gives good performance.
Olympus M.Zuiko 14-42mm EZ lens case. Internal size: * diameter 62.5mm * height: 32mm I've printed it using Sunlu PLA+ filament using a 0.4mm nozzle. Would recommend to print using the 0.08mm Extra Fine setting so thread is smooth
Lenscap for Olympus Trip35 or PEN There are two versions, one is the conventional and the other will cover the selenium cells only. Category: Camera
I lost My Olympus OM-D E-M10 Mk3 lens cap in an outdoor photo session. I could buy a bunch of those for a few bucks on Amazon, but I decided to print it by myself, instead. Here on Thingiverse a good number of interesting clip-in lens…
I purchased this lens [Olympus 35-100mm F2 ED for Four Thirds (and it is no longer in production, was very expensive when it was originally sold,) and it was missing the tripod collar, so I made one to replace it. There are four parts…
This is the version without the embossing visible in the photos. More versions are available to my patrons .
Based on the inspiration from the site makrofokus.se, a friend of mine asked me to design a diffuser for his Olympus Zuiko ED 60mm F2.8 Macro lens. I designed a separate ring for the bayonet and then a holder and hood that should be glued…
I was at a festival the other day, when I realized a screw had loosened letting my shutter speed dial escape. A dejected ebay search revealed no spare parts listings, and the cheapest parts cameras were still way more than I wanted to…
This is an adapter allowing you to use Olympus OM type lens on Gopro 5/6/7 Please note: This has to go without saying but you have to remove the lens cover of the Gopro and the original lens before attaching the adapter with the Olympus…
This is a removable lens cap for the Olympus TG-6 Camera. It is printed to replace the default bezel that you receive with the camera. 2 files need to be printed for the full assembly. The two halves are then connected together using a…
Battery box for 5 BLN-1 Olympus camera batteries. original lid was a little tight ( had to pry to open) so uploaded a new lid should print more loose. batteries fit both ways so make sure curved sides are on the right side or it will be…
The factory battery cover on my OLYMPUS BLS-50 has no clip and is easily lost. This replacement cover has a dimple finger grip which serves as a neat friction catch. The cover is lightweight, quick to print and protects exposed contacts…
This is an Arduino-controlled ring light for stereo microscopes with a 48x0.75mm threaded nose piece. This is one of the most common sizes and fits my vintage Olympus unit. Other thread sizes for which commercial ringlight adapters are…
The lens on the Olympus Tough cameras are fully exposed and do not come with any kind of lens cap. The ones you buy on amazon are ok but I've broken a few. I've made a basic cap then had some fun making different outer ring textures. My…
The lid is designed to be printed with color change. If your battery is empty, simply flip the lid to indicate charge status. Depending on printer settings and callibration, the lid may need reduce thickness a little. The gcode that…
License / Usage: This model is for personal use only. For commercial use, selling printed copies, or any licensing requests, please contact me first. This is an Olympus-inspired Greek column display stand designed for the Steam…
Буду рад получить обратную связь. I will be glad to receive feedback.
A replacement for the original LH-49B Lens Hood by Olympus, as far as I know it is only used on the Olympus 25mm f/1.8 lens, but the mount should be compatible with the 60mm f/2.8 macro lens from Olympus. You can use the step file to edit…
Really simple thingy. An insert that fits snuggly in the battery cap for the 35 RC. It allows for the use of a 675 sized hearing aid battery instead of the original Mercury PX625 battery. Category: Camera
this is a very usefull repair as the part is not available anywhere. Just use a small mettal rod that you fille or turn to 1mm or so for the metal part not included here. The tower in the file is here to let time for the part to cool…
This is my latest attempt to make things watertight for recreational scuba diving. I used most of the knowledge from my previous article and summarized everything in this video: Consider your skills before you start working on this…
Original eyecup and remix source kept snagging on stuff. These models only slightly protude from the viewfinder. Print it in TPU.
i have made the holes different from size … i have printed this one with support in the middle
This is a cover and grip for the tripod mount studs, for the Olympus 40-150mm Pro lens. Update: 40-150grip.stl is an updated version. It is a better fit, and has a nicer pattern. Print Settings Notes: Scale the model so the internal…
I converted my little E-PM2 to full spectrum and needed a way to hold the filters between the lens and sensor. The only already made solution I could find was for the newer rounder mount of Olympus cameras. So I took the opportunity to…
Desk mount with 4mm screw holes for the FiiO E10K Olympus 2. I used some 3.5mm wood screws Print with a brim if it doesn't stick to the bed.
Using 4 stainless steel (SS), 5"x5" (12.5x12.5mm) right-angles, normally used for supporting planks, this design consists of a flat base and 2 side-handles. On the top center there is a stainless steel loop for attaching a safety-line.…
Holder for Olympus battery BLH 1.
Lens hood for M.Zuiko Digital ED 40-150mm F4.0 PRO
Remix of the popular Olympus Controller stands for fake switch controllers from Amazon
I designed this adapter after failing to find one that suits my needs. These are the highlights of my design: As thin as possible to help in acheiving prime focus. Locking pin hole included to prevent unintentional release (and to prevent…
This is a simple lens cap for some of the Olympus pens. It doesn’t fit the original Olympus pen or the pen S. I haven’t done a lot of multicolored printing, so it’s possible that you could fill in the letters completely. However, with the…
Original SVG included, as well as Fusion360 files. OM Systems logo can be added to PrusSlicer Part Gallery for easy addition to any print. Hotshoe is a remix of my Panasonic hotshoe, EM1.1 has accessory port that needs covering as well.