1,236 models
Sizes (Diameter x Height): 30 x 25 mm 30 x 35 mm 30 x 50 mm 42 x 35 mm (2 mm and 3 mm thread) 42 x 50 mm (2 mm and 3 mm thread) 42 x 65 mm (2 mm and 3 mm thread) 66 x 50 mm 66 x 65 mm 66 x 80 mm Printing Parameters: Resolution: 0.2 mm…
Print approx. €1.87–€2.29 excl. taxPreliminary estimate for one variant
Sun Shield enclosure that transforms your indoor aqara temperature, humidity and air pressure sensor into an outdoor wireless weather station. The combination of sun shield dishes and internal cavity ensures some degree of air ventilation…
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for PETGSource material: PET
HexDish SignalBoost: Amplify Your Cell Signal Outdoors The SignalBoost HexDish is a modular parabolic reflector designed to enhance cell signal reception in remote areas like forests, campgrounds, or anywhere with limited coverage.…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
Made at the request of a Printables community member, these mounts are a traditional mounting bracket with dual offset screw points. These mounts are best used with typical flat bottom soffits. If you have angled soffits or rafter tails,…
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
GOOGLE NEST CAM DESK/TABLE/ SHELF ANY FLAT SURFACE MOUNT. CREATED THIS FOR MY BATTERY NEST CAM. TWO PIECE DESIGN, TOP SNAPS INTO BOTTOM FOR A TIGHT FIT, IF YOU LIKE YOU CAN ADD 2 DROPS OF SUPERGLUE FOR A PERMANENT FIT. LISTED ARE TRIED…
Print approx. €3.01–€3.67 excl. taxPreliminary estimate for one variant
The Tesla Model XYS3/Cyber Charger Holder embodies a sleek and weatherproof design, crafted to withstand outdoor elements while maintaining its aesthetic appeal. Engineered for durability, it ensures long-lasting performance, seamlessly…
Print approx. €10.70–€13.08 excl. taxPreliminary estimate for one variant
Eine kleine Zylinderförmige Box mit ca. 130×20mm, wobei der Stift 8mm Außendrchmesser, 5mm Innendurchmesser und 80mm Länge hat, für lange und kurze Nadeln, sowie eine Rolle Faden Platz da ist. Schön mit einem Loch für Paracordschleife…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
Stake for Hose, Tent, or Outdoor Rug Print a 100% for hose, 75% for Tent, and 50% for Outdoor Rug Designed to be able to withstand hammering into ground. I used 5 perimeters. Has had mixed results on vampires if using woodfill PLA. (Dip…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for PETGSource material: PET
Enclosure to mount and protect an SX1262 uFL connected antenna TBeam outdoors. Because of the longer antenna I chose, and with the MK3S being limited to 210mm height, I made the tube a slip fitting. Also, because I would have carry tools…
Print approx. €2.17–€2.65 excl. taxPreliminary estimate for PETGSource material: PET
This is a mounting bracket that holds a JSN-SR04T ultrasonic sensor and waterproof DS18B20 temperature sensor for mounting to a 1" square tube. This is part of a project to measure the water level of a creek. The sensor will be extended…
Print approx. €1.81–€2.21 excl. taxPreliminary estimate for one variant
This is built around standard outdoor North American outlets and is meantmeant to protect the outlets from excessive damage from the elements. The screw holes are 0.9cm in diameter. IfIf you have any questions or concerns, please feel…
Print approx. €7.44–€9.09 excl. taxPreliminary estimate for one variant
Description I needed to keep my Philips Hue® outdoor LED strip unplugged in the garden, and I decided to print a little cap to screw on the connector to avoid ruining it with humidity and weather. The M15x1 thread seems hard to print, but…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for PETGSource material: PET
EN: Safe and easy laying with this Tile Spacer. Allows easy a symmetrical joint pattern. With the correct laying and choice of dimensions, an optimal drainage and protects against edge flaking. Consumption: Approx. 7 pcs./sqm (plate size…
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
7x threaded inserts M3 2x threaded inserts M6 7x M3x8 DIN 7991 2x M6x16 DIN 933
Print approx. €4.92–€6.02 excl. taxPreliminary estimate for PETGSource material: PET
I made a simple trendy sign for a garden shedI have outdoors. A white colour change is used to create contrast against a black background, but really this can be done in any colour. Layer height is not important. I tried “ironing” in the…
Print approx. €6.94–€8.49 excl. taxPreliminary estimate for one variant
A wall-mounting bracket for the Ambient Weather Outdoor PM25 (PM2.5), which for some reason ships with screws but no mounting holes. The sensor simply slides in/out of the top for periodic recharging. The bracket uses the side lugs of the…
Print approx. €2.26–€2.76 excl. taxPreliminary estimate for PETGSource material: PET
Vallhorn outdoor case This is a case for using the Vallhorn sensor outdoors with more protection from the elements. Also I don't like the appearance from the sensor in my garden so I designed something that looks like a small bird house…
Print approx. €3.07–€3.75 excl. taxPreliminary estimate for PETGSource material: PET
I made this simple hook to hang Xmas lights outside the house, using the soffit vents. I have several versions, but this worked the best. I printed dozens of them in batches of 12, in PETG and PLA to match the soffit colour. Once the…
Print approx. €1.22–€1.49 excl. taxPreliminary estimate for PETGSource material: PET
Adjustable height endcap for table tenis, DECHATLON PPT 130 OUTDOOR
Print approx. €7.86–€9.60 excl. taxPreliminary estimate for PETGSource material: PET
Prkénko ultra light na dálkové přechody, velmi kompaktních rozměrů, opatřené otvorem pro zavěšení, materiál PETG, rozměry 150*80*3 mm, váha 30,52 g. Ultra light cutting board for long-distance transitions, very compact dimensions,…
Print approx. €2.88–€3.52 excl. taxPreliminary estimate for PETGSource material: PET
Celebrate your love for the woods with the Outdoor Life coaster—a rugged yet classy design made to bring the outdoors in. This model uses purposeful extrusions to guide flawless color swaps and includes a .3mf project file with pause…
Print approx. €1.35–€1.65 excl. taxPreliminary estimate for one variant
EN: The sun visor is made for a Technaxx TX-28 but may also fit other devices. As the camera occasionally overheats in strong sunlight and only starts up again when the temperature drops, I designed this sunshade. 1 model is split and can…
Print approx. €2.20–€2.69 excl. taxPreliminary estimate for PETGSource material: PET
Whether you're parked lakeside or dreaming about your next road trip, the Camper Life coaster brings adventure to your table. This coaster is designed for single-extruder printers—with built-in extrusion zones and preconfigured pause…
Print approx. €1.30–€1.59 excl. taxPreliminary estimate for one variant
I think: 10% infill, 4-5 perimeters and 2mm top and bottom solid layer thickness can be enough, but you can try lower values for cheaper print, but result may brake in your situation (STL model is upsidedown)
Print approx. €8.16–€9.98 excl. taxPreliminary estimate for one variant
Outdoor holder for GETI GMD01 motion sensor. Includes cutout for zip ties. Rainproof with drainage channels.
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for PETGSource material: PET
This is a set of parts I made to re-enforce the 3M adhesive used to mount Govee Permanent Outdoor Lights Pro (H706A). Light Mount : A small frame that goes around the outside of a light that can be screwed to the mounting surface to…
I received a long-reach prune tool from a family member but they did not have a pole/stick to mount the tool on. I could not find anything that would fit that prune scissor tool, so I made one. Not sure what the brand of prune scissor is…
Star Wars Outdoor Data Panel Entrance (Switch Plate) Find your decorative add ons by JG here: Star Wars Outdoor Data Panel Entrance (Switch Plate) - "Light" Add-Ons by jg | Download free STL model | Printables.com Its a bit bigger than a…
Shaker Sizes (Diameter x Height): 42 x 35 mm 42 x 50 mm 42 x 65 mm Grids: small, medium, large, open closed, small, medium, open closed, medium, large, open Lids: plain “S” for salt “P” for pepper “C” for chili, curry “O” for oregano…
Please feel free to support me so I can create and share more. Any amount is much appreciated PayPal me I've seen that a lot of people have issues with the 3M tape on these LEDs. So not wanting to go onto my roof more times than I have to…
I needed to protect the lens of my Blink Outdoor cameras from heavy rain (the water drops in the lens turn the image very blurry). So I decided to do a remix of the wonderful Blink camera Hood created by Neil Baker…
This is a functional, rugged EDC storage system featuring a quick-detach Snap-Fit mount. The design includes two size variants (small and large) and is optimized for functional use. Key Features: Modular Snap-Fit Mount: Integrated…
This airtight capsule offers a reliable solution for safely storing essentials like pills, matches, and small tools, keeping your belongings secure in any environment. Compact, durable, and versatile, it’s the ideal companion for camping,…
This is an electical box that i designed for my security cameras. It does not meet code but it might be useful for small projects. You can change the size by editing the base sketch in the object “box” and the depth of the box can be…
This Govee Pro outdoor LED light (HERE) mount is friction fit around the top of the LED but remains loose around the bottom. This allows the mount to be placed over the strand (and not fall off) while attaching outside. The design is…
This is an extra rain cover for outdoor mains sockets and switches (which are usually already IP44 rated). Print Settings Printer: RepRap Mendel Rafts: No Supports: No Resolution: 0.3 Infill: 15 Notes: UV-resistant filament is preferrable…
Picked up a set of the Govee RGBIC permanent outdoor lights but I'm not a big fan of the idea of using the adhesive. Partially because I don't want any residue to clean up in the future should these lights fail or loose their appeal and…
I needed to angle the camera 45° more than the stock base allows. Designed to use the hardware included with the camera.
This fixing peg is designed to ensure maximum stability and durability in any camping or outdoor activity scenario. Key features: The fixing peg features a spiral shape, designed for easy and secure insertion into the ground, whether on…
Specs Holds bag rolls up to 35mm diameter, 65mm wide. ✅ AmazonBasics ✅ Frisco … and many others! Print tips 🧩 2 parts: Main body and “pin”. Print separately for cleanest finish. ⮑ Print body left side down. Print pin upside down. ✨…
NOTE: I take no responsibility for this falling off your house. It's on my own house, and I feel like I've bulked this thing as much as I can to compete with the metal one from Starlink themselves. PETG is freakishly resilient and strong;…
Mount for an Aqara temperature, humidity and pressure sensor. Provides shade from direct sunlight and some protection from the elements. Suitable for use in a sheltered location such as a porch or balcony. The mount has a single hole for…
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
I needed an Indoor RC Plane with removable wings that use a proper 3D Airfoil (NACA 0018). My idea was to 3D Print the wings and use depron foam plates for the rest. but then i asked “why not?” This model is intended to be printed in…
I needed a cover for a 4" exhaust vent and this project is the result! Features Fits 4"/100mm vent pipe Wall mount has standard 105mm screw spacing to fit a 120mm fan Flap model acts as a valve when used as an exhaust vent Modular mount…
Like this mount? Check out our brackets too! https://www.printables.com/model/1083606-govee-compatible-bracket-for-permanent-outdoor-lig Brackets to mount the power brick and switch brick for Govee Outdoor Pro lights. Suggest printing…
Turn your old plastic bags into a fun parachute for this paratrooper soldier! The model creates an entertaining outdoor toy for kids. , it requires supports for optimal results. For best durability, print with 45%–55% infill using PLA or…
the sensor is from aliexpress: (20x25x71 mm) https://de.aliexpress.com/item/1005006008193742.html the two parts just snap together I would only print this in white :) Other colors including black will heat up more in the sun! printed with…
This is a 45 degree mount for a Blink Outdoor camera. It comes in 2 parts. The main body gets screwed to the wall through the front and then the outer cover is placed overtop and is screwed in place by 4 - #4 screws. It helps prevent…
Slight modification to the narrow mount introduced by Gelap with removal of two of the corners so there are only two mounting holes. Added two alternative versions for mounting the junction between light strings. One with just a single…
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
A couple simple files to print in a different color to accent the original model as "lights". I simply super-glued these in place. It's a great use for the small amounts of filament left on spools that are not enough for bigger prints.
A decorative housing for outdoor mounting of the Aqara temperature and humidity sensor. Includes ventilation grill at the bottom. Prints without supports.
Here is the 18650 case for outdoor use. Useful for ESP in conjuction with deep sleep mode. Print instructions Category: Electronics Summary Here is the 18650 case for outdoor use. Useful for ESP in conjuction with deep sleep mode.
Intro This Micro Medical Kit is a tiny but thoughtfully designed first-aid container for everyday adventures. Whether you’re hiking, camping, traveling, or out with kids, it gives you a minimal emergency backup without taking up space.…
Made it to have a parametric 3D model for varying outdoor products. It snaps together, and releases nicely by pressing on the sides. This can be resized while maybe print in place will at some stage become questionable. Use ASA filament…
DHT22 sensor outdoor box. The box is designed to prevent water ingress, allow air flow, and mitigate overheating by the sun. It also has a chimney to avoid the problem of condensation. This piece is still under test. 4 m3 screws are…
i wanted to know when my wooden backyard fence's gates are open, so if the mowers or poop scooper people leave it open, i'll know with automation. these are ugly and low effort, but they work. these are for wooden fences, and the holes…
I present a model of a foldable sundial, for learning at school and outdoor use. The model halves must be printed separately. Then we gently connect the parts on the hinge (I was inspired by the hinge model:…
My motion detector fell down and I needed a new plastic lens for the sensor. The cover is very thin. The sensor still detects movement, but the cover is probably no longer 100% waterproof. I printed upside down with supports.
This is a Lantern I designed The inside box is Just a single-layer wall printed in white filament to allow maximum opacity without revealing the LEDs The LEDs I use…
After receiving a second hand TP-Link EAP225-Outdoor access point, I discovered that the original wall mount bracket was missing. The design has a low profile and no locking mechanism. Print wall-side down, no supports required.
Med/big outdoor knife. Tanto blade. Back then I milled one out of steel. Here to print to test the size ;-)
I made a remix of this excellent radiation shield to use Aubess Tuya Zigbee Temperature Humidity Sensor. These sensors are very popular and available, so I wanted to try them outdoor. Buy here Size is compatible with the original design…
The power supply mount is compatible with the 36V 2A PSU model SOY-3600200US-306 which comes with Govee RGBIC LED Permanent Outdoor Lights models H705A, H705B, and H705C. The controller mount is compatible with the aforementioned models.…
The design makes use of the existing Blink camera bracket and the supplied screws. There is a curved cavity so a large cable tie can be passed through it and around a UK standard downpipe. Downpipe external diameter: 69 mm Cable tie…
Philips Hue Outdoor Sensor White Cover Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: Yes Resolution: 0.15 mm Filament: - - white Custom Section Category: Other
A small stand for (Amazon) Blink Outdoor cameras (BCM00400U). Compact design. Notch on front of riser allows camera to be angled downward. Uses OEM mount and screws, and provides stable feet. Feet are not visible to camera, in any…
With the Govee permanent outdoor lights to get the best scalloping effect each light needs to be placed the same distance from the house. So, I made this little tool that you can use to place one part against your house and hold the Govee…
Created to minimise the chance of leaks, and to remove the need for silicoln. The box has increased in size so that other sensors can be added, also tie wrap points have been added for batteries / other electronics. The aerial is now…
Print (2) Ends and (1) Middle. Insert a ¼" magnet into each of the ends. Glue the middle section to one of the ends. Fits large paper towel rolls but also works with smaller rolls
I've been testing the battery operated Blink Security Cameras (4th Generation) for my Promaster van. I wanted to make a magnetic mount that I could use on the outside. I wanted to use a large rubberized robust magnetic that wouldn't…
Petg bowling pin. Enjoy in the beach, pool, etc Use the step file to paint easly in your sliccer and have the auto pauses. Print settings PETG 0.2 layer height or variable variable 3 walls arachne 10% cubic infill no brim or supports…
Simple enclosure for the Netatmo outdoor sensor module. Printed with PETG onto an Ender 3. No supports needed.
In advance: The stability of the furniture depends on the dimensions and materials you choose. I take no liability for the piece of furniture you build or consequential damages from it. Update: I have uploaded a 1 inch version, but I…
Use with 4x M3x20 screws (DIN 912) 4x M3 (DIN 562) square nuts Mount on wall with double sided tape
This is a mount plate for the Nest Cam (outdoor or indoor, battery) https://store.google.com/product/nest_cam_battery?hl=en-US Google don't/won’t sell these. Pictured at 3:26 in the video above. https://youtu.be/x2-RRXMj-cs?t=206…
This is a solar radiation shield for mounting a temperature sensor outdoors. The shield allows air to flow through freely, but protects the thermometer from direct and reflected solar radiation. This provides a much more accurate…
While the G3 Bullets are weatherproof, it can't hurt to protect them from the elements. I use this shroud to protect my G3 Bullet while captuing an outdoor timelapse of the countryside, attached to a pole on my roof. UPDATE: Added slotted…
Enclosure for the Shelly Humidity & Temperature sensor. Use it to have a more wather proof Shelly outside your apartment. Print the two halfs (bottom and top), put your Shelly inside the bottom half and screw the top half on top of it.…
I made cover for my netatmo outdoor module, this can be printed without supports. Just insert outdoormodule between two halfs, screw in stand and then top.
Useful IP-CAMERA Cover I also suggest to install the cover using this cots beetwen 3d printed parts and wall: https://www.amazon.it/dp/B0BKB15JH4?psc=1&ref=ppx_yo2ov_dt_b_product_details Hope u enjoy
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
Simple wall-mount brackets for both the power adapter and controller module that come with the Govee Permanent Outdoor Lights kit. Mine are the non-pro model, from pictures it looks to me like the pro model uses the same power brick and…
This is a gable mount for the outdoor govee lights square model Print Settings Printer Brand: Creality Printer: K1 **Rafts:** No Supports: No **Filament:** Creality PLA, PLA+ white Notes: The gaps are a bit tight. I am sure you could…
Case for dht22 on other sensor version outdoor with PG screw opening and cable stripe connector version indoor with backwall cable opening Used M2 8mm screws for lid M2x4x3,5 threaded inserts PG7 screw connection for outdoor version DHT22…
Outdoor shell that fits Aqara G4 doorbell for some additional protection from the elements. Not waterproof, but if water does get inside, there's an opening on the bottom, so that water won't be trapped. Work in progress, so I'll gladly…
There are two versions of this tool provided: v1 - The tool pictured in the cover photo - This is the tool my brother and I used. It has a label so years from now you or whoever finds it will know what the heck it is. v2 Slim Edition -…
🐾 Stay hydrated on the go! This Outdoor Pet Water Bowl makes it easy to keep your pet refreshed anywhere. Just screw a standard plastic bottle onto the bowl, tilt, and water flows in. When your pet finishes, tilt the bottle back and the…
My brother has 10 Philips Turaco outdoor lamps and after 3 years under the sun, the light cover starts to disintegrate. Since Philips does not provide any replacement parts we decided to print the replacements ourself. When installed in…
Govee H706A Permanent Outdoor Lights Pro Mount Bracket I’ve designed two versions of this mount: A side-mount version A narrow-edge version requires just 1.5 inches of space. Both versions are designed with #8 self-tapping screws. I…
Wedding Charms, Outdoor/Camping theme.
Recommended Fastener is Number 6 flat head screw https://www.mcmaster.com/catalog/129/3356/98903A206 P1S 0.2mm layer PLA tough Tree Supports
Housing for using a DHTXX sensor outside, keeping it shaded from the sun and weather. The housing has stacked "roofs" to allow for air to flow through but keeps water and sunlight out. It is a two part design for easy install and…
Blink Outdoor X2 camera protection rain Rain cover and protection, for the original bracket. Easy, just take off rain protection and remove the camera up to the battery change. Be needed: 2x m3x20mm 2x M3 nuts Alternatively, wood screws…
Kudos to PointNemo for the original design - I love these little bottles! (Vielen Dank! Ich liebe diese kleinen Fläschchen!) A lot of folks are guilty of this, so I don't want to disrespect the original designer, but there is just no need…
Mounting rig for the Philips hue outdoor sensor, to mount it without gap between the wall and the sensor.
I made this outdoor weatherproof Junction Box to accommodate an Eero Wifi unit to extend my network outdoors. The box has 3 thin walled (0.4mm) 20mm diameter optional punch outs at the bottom to feed conduit too. Use a speed-bore bit to…
This Case is to safe your Tapo C100 Indoor Webcam from Dust and Rain. The picture is from another Reddit user, because i forgot to take a picture of my model when i uploaded it. I already asked him if i could get the Stl but he didnt…
A simple cover to protect your Aqara temp/humidity sensor against the elements. I've included the step file for easy alteration and remixing. I used tape, but you may want a mounting hole through the back.
![[OUTDOOR] Prune tool adapter](https://media.printables.com/media/prints/99741c24-799a-48f9-81ad-7d21d16ab37b/images/10230847_aeebb432-ff55-44ad-b7fa-ea2dc29b048a_aa0281ba-a84a-4156-9187-a634c7b9f22d/img_20250713_150546.jpg)
