Search results: philip

Sort order

Counting matching models…

P
Printablesdtoux

Philips Hue Bridge Bracket

This is a print of a bracket for mounting Philips Hue Bridge to a wall. Features: tight friction fit for the bridge ability to mount the bridge without disconnecting wires does not block access to the button and LEDs screw holes for…

Downloads
1,993
Likes
291
Rating
5
P
PrintablesCVD

Toothbrush + Induction Charger Wall Mount (Oral-B & Philips Sonicare)

At long last, the electric toothbrush has a functional, aesthetic and permanent place in the bathroom- and it's not the sink countertop! The induction charging base, which used to only appear during weekly recharging, nests perfectly in…

Downloads
1,376
Likes
250
Rating
4.88
P
Printablesnikoladeon

Electric Toothbrush Holder for a family (2x Philips Sonicare + 2x Oral B)

Had the issue that in our family, all have an electric toothbrush. They were standing next to the sink and always fell over. So I created this stylish toothbrush holder for the 4 of us (there are 2 bigger holes for the parents toothbrush…

Downloads
1,238
Likes
143
Rating
5
P
PrintablesWall Art S

Philips OneBlade Socket Holder

A cluttered sink, a dangling charger, a trimmer awkwardly balanced on the edge… sound familiar? This is exactly the kind of daily hassle that inspired me to design this socket-mounted Philips OneBlade holder. Thanks to real-world use and…

Downloads
1,226
Likes
590
Rating
4.83
P
PrintablesEvis Home Lab

Philips Hue Motion Sensor Wall Mount

3D printable wall mount for Philips Hue Motion sensor , give a little bit wider rotation angles, and allows easy battery changes while keeping the mount aligned to the correct direction. Check out all the mount options . The mount is…

Downloads
944
Likes
144
Rating
4.8
P
Printablesaith53

Replacement Beard Comb for some Philips Hair Clipper Beard Trimmer HC BT models peine barba

Replacement adjustable beard comb for some Philips HC and BT models. Recambio peine ajustable para barba compatible con algunos modelos Philips HC y BT.

Downloads
854
Likes
71
Rating
4.25
P
PrintablesBossen

Philips Hue Play Wallmount

Philips Hue Play Wallmount Great wall mount that mounts to the original hole under the play device. The base is tilted about 65 degrees to give a softer light on the wall than the original. It puts the play 70mm from the wall and attaches…

Downloads
369
Likes
55
Rating
4.33
P
PrintablesScottyCZE

Philips Avent camera holder for IKEA SUNDVIK cot

English: Camera holder for baby monitor Philips Avent SCD923/26 for IKEA SUNDVIK cot. Easy to print! Print on the side, no support needed. Please don't forget to share a picture of your print. Czech (čeština): Držák kamery chůvičky…

Downloads
171
Likes
8
Rating
5
P
Printablesmysak85

Beard Trimmer Philips MG7720 holder

V případě, že se Vám výtisk povede, prosím přidejte fotografii. DĚKUJI If the printout is successful for you, please add a photo. THANK YOU Držák na holící strojek Philips MG7720 s možností připojení nabíječky. Vytištěno s tryskou 0.6,…

Downloads
122
Likes
19
Rating
5
P
PrintablesMarco Vivanco

Philips Norelco Multigroom Series 3000 Trimmer Holder / Dock

Supports: No Infill: 10% Rafts: Doesnt matter

Downloads
114
Likes
18
Rating
4
P
PrintablesMike Rapt

PHILIPS SpeedPro (FC6823) parts

Replacement parts for SpeedPro

Downloads
102
Likes
5
Rating
0
P
PrintablesMarkus

Philips OneBlade Travel-box with stand

Philips OneBlade Travel-box with stand A small box with a lid where the accessories are stored. https://amzn.eu/d/ivvry3F

Downloads
102
Likes
23
Rating
0
P
PrintablesMrtritop

PHILIPS EP2231 Anti Vibration Feet

Anti Vibration Feet for PHILIPS EP2231 Coffee-machine. Makes it a lot more quiet. Printed with PLA. Supports recommended.

Downloads
92
Likes
9
Rating
5
P
Printablesscott

Philips Multigroom 3000 minimal case

This minimal case protects the Philips Multigroom 3000 (MG3750/60) from accidental activation and covers the blade, clicking securely into place. It’s especially useful when travelling, keeping your trimmer safe without adding bulk. The…

Downloads
90
Likes
31
Rating
5
P
PrintablesAlvomane

Philips Hue E27 compatible diffuser/lampshade | Philips Hue E27 kompatibler Diffusor/Lampenschirm

This is a diffuser that can be used to evenly distribute the light from Philips Hue E27 LED bulbs. Other light sources may also fit inside. I originally made the diffuser for a triangular lampshade , but it also works as a stand-alone…

Downloads
90
Likes
32
Rating
0
P

Philips OneBlade holder

This is Philips OneBlade holder.

Downloads
88
Likes
12
Rating
5
P
Printableskikkingoff

Wall mount for Philips Avent SCD923/26

The diameter of the retaining circle is 70.82mm. The fixing holes are 5mm. In the photos I fixed the support temporarily with Patafix / Blu-Tack Print in PLA, 0,15mm, with support

Downloads
75
Likes
6
Rating
0
P
PrintablesjonnieZG

Quick Clean Pod Cartridge for Philips Shavers

Introduction This is a replacement cartridge for the Philips Cleaning Pod model AC52/01 . It is not a copy of the original cartridges, but is designed to be fully compatible with the original Cleaning Pod, and optimized for easy 3D…

Downloads
72
Likes
11
Rating
0
P
PrintablesRoseninc

Philips Hue Festavia string lights Fence Clip

I made this model to secure our Philips Hue Festavia string lights to the top of our terrace fence. The top of the fence has the following dimensions: H: 4 cm (1.5748 in), W: 2.9 cm (1.14173 in). The fence also has a small 2mm indentation…

Downloads
70
Likes
10
Rating
5
P
PrintablesSven

Philips Avent Babycam/Babyphone Holder

This a Babyphone Camera Holder for the Philips Avent (Modell SCD923/26). It can be used to store the babycamand a powerbank, which can be used to power the babycam. Dimensions: Theoretically it can fit any babycam with a stand of 70mm.…

Downloads
68
Likes
7
Rating
0
P
PrintablesHejaaa

Philips Hue Motion sensor swivel holder (with additional magnet)

KT-14-02-N is with enough magnetic strong and good setup (recommended) KT-15-05-N too strong for easy setup

Downloads
49
Likes
14
Rating
0
P
PrintablesFreshdonkikong

Philips Nose trimmer Series 3000 Wall Mount

This wall mount is designed for the Philips Nose trimmer Series 3000. The locking mechanism is designed for easy handling and good grip. Various holding options are built into the back. In addition, the surface is large enough that the…

Downloads
35
Likes
12
Rating
0
P
Printableshjmcnew

Philips Hue v1 dimmer switch mount

I use my Philips Hue v1 dimmer switch as a scene controller in my office. I wanted it mounted under my desk to remove clutter but keep it easily accessible. I created this mount designed to work with 3M Command Strips to mount the dimmer…

Downloads
33
Likes
9
Rating
5
P
Printablesargoroots

Switch cover for Philips Hue dimmer

Cover to incorporate power switch and Philips Hue dimmer. Print instructions Use magnets from original Hue dimmer holder in hue-switch-cable-box-cover . Print hue-cover-for-transparent file if You print it with transparent filament and…

Downloads
21
Likes
3
Rating
0
P
PrintablesPracticals

Practicals Philips Hue Bridge Rackmount V1 (Without Lid)

Info ------------------------------------------------------------------ This is a rack mount V1 (without an top lid) for the Philips Hue Bridge (V2). I used ShapR3D for modelling. Choose your Version (right or left). Please use 6mm screws…

Downloads
18
Likes
2
Rating
0
P
Printablesgellyflee

Philips LED spotlight ring

When I replaced the normal floodlights in my bedroom with smaller LED versions, I found that the original metal rings that came with the fittings were too large. As they are LED bulbs, the plastic won't melt (or hasn't melted yet) and so…

Downloads
17
Likes
1
Rating
0
P
PrintableseVoxOne

Philips Hue Play Lightbar Mount for IKEA Kallax – Snap-On

Philips Hue Play Lightbar Mount for IKEA Kallax Enhance your IKEA Kallax setup with this custom mount for the Philips Hue Play Lightbar . It simply slides over the top edge of a Kallax shelf and positions the lightbar to shine straight…

Downloads
16
Likes
0
Rating
0
P
PrintablesRicardomo

Agarre pared Philips Hue - un interruptor

Embellecedor de un interruptor philips Hue

Downloads
12
Likes
1
Rating
0
P
PrintablesP1utarch

Wii SensorBar Holder für Philips TV (65PUS7906/12)

Simpler Halter des Wii SensorBars für "Philips 65PUS7906/12 65 Zoll LED Android Fernseher". Zum selber mit Klebeband draufkleben. Mit zwei Haltern auf der Rückseite für das lange Kabel des Sensors.. Einfach mit PLA in Schwarz (oder…

Downloads
9
Likes
2
Rating
0
P
Printablesb_sb

Reinforced Tool for Philips Blender ProBlend 6 3D

Based on the concept from GB150, but with thicker walls on the ring.

Downloads
8
Likes
0
Rating
0
P
PrintablesPaescu91

Grundplatte für Philips hue Runner Spot Lampe

Grundplatte wird mit den Madenschrauben des Lampensockels befestigt. Kabel gehen seitlich aus dem Gehäuse.

Downloads
6
Likes
0
Rating
0
P
PrintablesÉLETHER

Porte pile télécommande Barre de Son Philips / Battery holder for Philips soundbar remote control

FR: Porte pile de remplacement pour barre de son PHILIPS: HTL2160 HTL2101A HTL2111A et autre, de la même forme. EN: Replacement battery holder for PHILIPS soundbar: HTL2160 HTL2101A HTL2111A and others, of the same shape.

Downloads
4
Likes
0
Rating
0
P
PrintablesPhilips

Philips Fixables | OneBlade 1-3mm comb

Philips Fixables. 3D printed parts for fresh starts. Need a new comb to fit your Philips OneBlade? Print yours now. Trim and style your beard, just the way you like it. About Philips Fixables Fixables is a collection of 3D printable spare…

Downloads
8,817
Likes
1,953
Rating
4.89
P
PrintablesFAYRON

PHILIPS OneBlade - Compact travel case

PHILIPS OneBlade - Compact travel case 🔑 Key Features: Easy to Use - No Assembly, No Supports, just print and use. New and Original Locking system – Custom designed locking mechanism keeps the case secure, in addition the printed…

Downloads
7,808
Likes
2,829
Rating
4.5
P
Printablesleperos

Combs for Philips OneBlade

Combs are in the original "click" system. Randomly tested sizes: 1mm, 2.5mm, 4mm, 5.5mm, 7mm, and 8mm – each one fit my razor. I don't recommend printing multiple at once. Print one first and check if it fits. Printed on a problematic…

Downloads
7,131
Likes
1,807
Rating
4.78
P
Printablesbensen

Philips OneBlade Face & Body – Ultimate Wall Mount

The (imo) Ultimate OneBlade Wall Mount (for Philips OneBlade Face & Body ). Precisely modeled for tight tolerances for friction fitting multiple accessories onto a space-saving wall mount (pressure fit/interference fit). No supports…

Downloads
3,269
Likes
1,506
Rating
4.93
P

Philips OneBlade Stand REMIX

A stand for the Philips OneBlade and its accessories. OneBlade Holder 1 Blade slots 4 Guard Slots (1,3,5mm) 2 Slots fo

Downloads
3,112
Likes
839
Rating
4.94
P
PrintablesHugoWhite

Compact Case 1 for Philips OneBlade - Home Edition

Introduction Compact Case 1 is the first model of the compact case series. This model is designed for home storage and daily use. It provides a permanent, organized countertop space for your OneBlade handle, standard attachments, and…

Downloads
2,773
Likes
1,181
Rating
5
P
PrintablesTJDesign

Bean reservoir (hopper) extension Philips Saeco 1200-5500 (latte go) series

Bean reservoir extension Philips 2200-5500 (Latte Go) series. Will increase capacity to approx. 500g (1/2 kg) or 1KG beans. Pre 2023 models: BEAN 1-4 : split version of the 500gr version BEAN_1_PIECE 1 : 500gr version in 1 piece…

Downloads
2,693
Likes
162
Rating
4.72
P
PrintablesKarma Carl

Philips one blade stand

stand for the razor and accessories feel free to remix it for other one blade versions

Downloads
2,656
Likes
700
Rating
4.57
P

Philips OneBlade Medieval Chest – KCD2 Edition

KCD2 Wooden Chest for Philips OneBlade 360 Store your treasure! We present to you a wooden storage chest , designed specifically for the Philips OneBlade Kingdom Come II Limited Edition . The chest features a Wood-imitation body with…

Downloads
2,312
Likes
689
Rating
4.86
P
PrintablesMateusz Tokarz

Philips OneBlade Stand & Organizer | Holds Combs

BOM: Printed with ROSA3D Starter PLA Black Keep your grooming kit perfectly organized with this custom-designed stand for the original Philips OneBlade shaver. Instead of leaving your shaver and its delicate attachments scattered on the…

Downloads
2,221
Likes
634
Rating
5
P
PrintablesWF3D

Philips OneBlade Pro Stand

Prints best at 0.1 mm resolution to minimize steps on the slope. The design includes through holes for better cleaning with water.

Downloads
2,140
Likes
219
Rating
4.96
P
Printablessui77

Coffee container extension (Philips 2200 Series)

Coffee container extension (Philips 2200 Series)

Downloads
1,868
Likes
132
Rating
4.81
P
PrintablesRay_014

Philips OneBlade Stand

A stand for the Philips OneBlade and its standard accessories. -OneBlade Holder 2 Blade slots 4 Guard Slots (1,2,3,5mm) 2 Slots for Face and Body guards Printed in PLA at 0.3 using Ender 5 Plus with 30% Cura Lightning Infill Lower infill…

Downloads
1,752
Likes
263
Rating
5
P
Printablesprider

Philips Norelco 7000 Holder

This is a holder for a Philips Norelco shaver / groomer. It comes with a lot of attachments, but just a bag that holds them all, so you have to dig through and find the one you need. The larger guards & blade are across the back, with the…

Downloads
1,569
Likes
180
Rating
4.71

Giant Screw Stash Box - Recessed Philips - No Supports

Fits Gift cards and more! Prints with NO SUPPORTS! High capacity secret stash or gift box. Think I'm Awesome? ~ https://buymeacoffee.com/triplegworkshop Want to sell this? → Grab a commercial license on my Club! Only $20/month cancel…

Downloads
1,552
Likes
481
Rating
5
P
PrintablesMarian Adam

Philips OneBlade Travel case with 4x3 magnets

this is a remix of the OneBlade travel case made by Andres. i just modified the magnet space to fit 4x3 or 4x4 magnets.

Downloads
1,511
Likes
714
Rating
4.67
P
Printables0x4C4A

Philips Sonicare charger holder with Schuko plug

Upon seeing the OralB charger holder with Schuko plug, I wanted to make one for my Sonicare toothbrush. I took inspiration from the OralB charger holders and took some “design advice” from the schuko adapter linked as remixes. V1 was the…

Downloads
1,300
Likes
162
Rating
4.86
P
Printablesgiammy_m

Philips OneBlade Pro 360 case

This is a case based on the parametric Rugged Box by Whity, I created an insert that can be slid inside the box. It can carry every blade and comb that came in the original box, the charger has its slot too. There are some additional…

Downloads
1,245
Likes
237
Rating
4.69
P
PrintablesScatterthought

Philips Multigroom Accessory Tray with Modular Parts

The Philips Multigroom 7000 comes with a bunch of heads and guards, which is great. It also comes with a mediocre black pouch to store them in, which is not great. I've designed a number of accessory trays to suit a variety of needs.…

Downloads
1,187
Likes
213
Rating
4.94

Philips Multigroom 7000 Trimmer + Accessories Organiser (MG7715/65)

An aesthetically pleasant organiser that fits the (MG7715/65) Trimmer and all its accessories Designed to print super easy, just make sure the bottom is oriented to the print plate.

Downloads
1,183
Likes
424
Rating
4.86
P
PrintablesChrisWilmshurst

TV Guides for LED Strips - Philips Hue Gradient (works with others and Monitors)

Have you ever had an issue with RGB strips falling off the back of your TV? Well, so have I. I was also very unhappy with how it bounced off the back of the wall and the lack of even glow around the TV. So, rather than spend an extra…

Downloads
1,178
Likes
168
Rating
4.83
P
PrintablesMartynas

Lidded box for Philips 7000 series shaver (MG7736/15)

A box for Philips 7000 series 16 in 1 shaver (MG7736/15), that fits all pieces that come with the shaver. Features: Lid of the box stays upright when open - does not flop down to either side. This can be modified by removing the stops on…

Downloads
1,161
Likes
162
Rating
4.91
P
Printablesdtoux

Philips Hue Bridge Bracket v2

This is a smaller version of the original design that uses less plastic. It features: tight friction fit for the bridge ability to mount the bridge without disconnecting wires does not block access to the button and LEDs screw holes for…

Downloads
1,120
Likes
127
Rating
4.79
P
PrintablesThemilda

Philips OneBlade stand holder

A simple and modern stand for your Philips OneBlade. Put it on the sink or on the cabinet in the bathroom. Works great and looks good.

Downloads
1,104
Likes
105
Rating
5
P
PrintablesChris Ne

Philips Oneblade Travel Case (magnetic)

I would be very happy about a Make, Like or Share! Happy printing! Use a stainless steel round head allen screw M3 x 30mm and an M3 nut. I printed this with the insides down to the print bed (with support)

Downloads
1,084
Likes
774
Rating
0
P
PrintablesEricBuijs

Philips OneBlade comb

Replacement for the Philips OneBlade Comb in different heights. The original combs tend to break easily and the original replacements from Philips are expensive. I uploaded the stl files for one and two mm height. I've also uploaded the…

Downloads
1,073
Likes
145
Rating
4.29
P
PrintablesVasilii

Philips Sonicare Case

UPDATE : @JesseSchauer_545466 designed an adapter for newer 4100 models - https://www.printables.com/model/924901-sonicare-4100-case-adapter . Give it a try if you have one of those toothbrushes. It's a case for Philips Sonicare electric…

Downloads
1,068
Likes
187
Rating
4.57
P
PrintablesPhilips

Philips Fixables | Hair Clipper Comb 7-24 mm

Philips Fixables. 3D printed parts for fresh starts. Need a new comb to fit your Philips Hair Clipper? Print yours now. Simply click it on & clip your hair with precision. About Philips Fixables Fixables is a collection of 3D printable…

Downloads
1,035
Likes
110
Rating
4.5
P
PrintablesSiff3D

M4 Bolt Philips Head

Customized version of https://www.thingiverse.com/thing:193647 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=193647 Customizer Parameters type = bolt head_type = countersunk drive_type = phillips…

Downloads
949
Likes
33
Rating
5
P
PrintablesDaniel Travel

Philips OneBlade Pro Holder

A holder for the Phillips One Blade Pro and its accessories

Downloads
938
Likes
103
Rating
4.94
P
PrintableszAgT

Electric toothbrush holder (Philips Sonicare Diamond Clean)

Toothbrush Stand: Electric_toothbrush_holder_single.stl Electric_toothbrush_holder_double.stl Toothbrush wall mount: toothbrush wall mount x1.stl toothbrush wall mount x2.stl Drill two holes on the back of the mount and mounted on the…

Downloads
925
Likes
113
Rating
4.78
P
PrintablesEvanRLD

Philips MG 3000 series clipper guard

Lost the orginial hair clipper guard so i made some in 3D Print with supports in PLA, 0.2 height

Downloads
906
Likes
71
Rating
5
P
PrintablesPhilips

Philips Fixables | Hair Clipper Comb 3-15 mm

Philips Fixables. 3D printed parts for fresh starts. Need a new comb to fit your Philips Hair Clipper? Print yours now. Simply click it on & clip your hair with precision. About Philips Fixables Fixables is a collection of 3D printable…

Downloads
877
Likes
51
Rating
4.33
P
PrintablesPhilips

Philips Fixables | OneBlade 5mm comb

Philips Fixables. 3D printed parts for fresh starts. Need a new comb to fit your Philips OneBlade? Print yours now. Trim and style your beard, just the way you like it. We listened to your feedback and developed a 5mm version. About…

Downloads
869
Likes
99
Rating
5
P
PrintablesFree

PHILIPS OneBlade Razor - Minimalistic Travel Case

PHILIPS One Blade Razor - Minimalistic Travel Case Reason for Model - The reason for the model was for a simple OneBlade case that only carries what I need a OneBlade with a guard for traveling. Features Cap Holder - For keeping your…

Downloads
868
Likes
238
Rating
5
P
PrintablesKvis

Hair dryer diffuser for PHILIPS

My wife asked to design and print this thing for her, so I did. Printed with ABS to be heat resistant. Layer height - 0.2, infill - 5%, 2 walls. Add massive inside and outside brim. No supports needed. Print test ring first to test if it…

Downloads
868
Likes
43
Rating
5
P
Printablesllang

Philips Hue Lightstrip corner

Philips Hue Lightstrips make good TV backlights, but I had trouble mounting them facing directly towards the wall and bending them downwards near the edge of the TV. This simple part helps to hold them in place and keep them flat, while…

Downloads
804
Likes
132
Rating
4.88
P
Printablespbilek

Philips OneBlade Stand, equipment storage and charging dock

I was looking for some proper stand for my new OneBlade. Originally I was inspired by this thing by xenotrim: https://www.thingiverse.com/thing:2986584 Thank you xenotrim! https://www.thingiverse.com/xenotrim/about It was not exactly tha…

Downloads
794
Likes
171
Rating
4
P

Philips OneBlade Helmet Wall Mount – KCD2 Edition

KCD2 Helmet Wall Mount for Philips OneBlade 360 Armor up 🪖 We present to you a helmet wall mount , designed specifically for the Philips OneBlade Kingdom Come: Deliverance II Limited Edition . The helmet features a functional holder that…

Downloads
776
Likes
304
Rating
4.6
P
PrintablesRogierCo

Philips Monitor VESA Adapter

This is a VESA mount for Philips monitors that do not come equipped with one and have the stand attached internally. The screen I designed this for is the 276E8VJSB, but it might also work on others of similar design! Print instructions…

Downloads
746
Likes
38
Rating
0
P
PrintablesAlex

Philips Hue Lightstrips Clip

Clip for Philips Hue LED Lightstrips with hole for countersunk screw.

Downloads
731
Likes
214
Rating
4.89
P
PrintablesMartin_au

Charging stand for Philips 5000 series electric shavers

This is a charging stand for Philips 5000 series (specifically S5582/20) electric shavers. The design uses a sleeve to clamp the cable. Please check that your charger plug is the same as that shown in the image. If it is different, then…

Downloads
711
Likes
71
Rating
4.69
P
PrintablesDominik

Philips OneBlade shaver Extensions 8mm

Resolution: 0.1 mm (cca 46 min) or 0.15 mm (cca 26 min)

Downloads
699
Likes
171
Rating
5
P

Philips Hue Bridge 10-inch Rack Mount

A 10-inch rack mount for the Philips Hue Bridge. This mount has two versions. One with keystone slots and another without them. I've also included a .3mf file. This model is part of a series of 10-inch rack mounts I've designed. You can…

Downloads
663
Likes
56
Rating
5
P
PrintablesKriOz

Philips Multigroom 7000 tray

Since i like to keep everything in place, i made this box for Philips Multigroom 7000 version. It is for 13 peace guard and head version. Shaver itself fits in place perfectly!

Downloads
623
Likes
78
Rating
5
P
Printablesmike

Philips Sonicare Electric Toothbrush Holder (3M Command Strip Wall Mount)

Overview This Philips Sonicare toothbrush holder is designed to allow toothbrush insertion from the top or side. This holder allows toothbrushes to be more easily stored higher on walls, far out of reach from splashing sink water, etc.…

Downloads
605
Likes
108
Rating
4.8
P
PrintablesKristoffer

Battery cover for philips remote

Original battery cover got lost so I made this. Snug fit and does the job.

Downloads
601
Likes
27
Rating
5
P
PrintablesMatt B

Philips Multigroom Accessory Caddy

This remix will hold a majority of the Philips Multigroom MG7750 accessories. I wanted a tray that would hold both the smaller beard guards as well as the larger hair guards. This was created using @Scatterthought's modular files. I used…

Downloads
598
Likes
86
Rating
5
P
Printablesitz_niklas

Philips Sonicare Toothbrush Holder

Simple, slim and practical toothbrush holder for Philips Sonicare brush heads. Available with 2,4 or 6 slots to keep your bathroom tidy.

Downloads
593
Likes
68
Rating
5

Dies for Philips Pasta Maker Viva HR2333

Dies for Philips Pasta Maker Viva HR2333 I have created dies for making different pasta shapes: pappardelle, spaghetti alla chitarra, spirali, tagliatelle, vermicelli. I put the source in CadQuery in case you want to make your own…

Downloads
584
Likes
56
Rating
0
P
PrintablesMarcElbichon

Philips Sonicare Electric Toothbrush Holder

Print, add a piece of waterproof double sided tape, enjoy!

Downloads
583
Likes
68
Rating
5
P
Printablesjcq

Mount for Philips Hue Gradient Ambience Lightstrip

Here are four different mounts for Philips Hue Gradient Ambience Lightstrip. First one is a loose fit and the second one is a much more tighter fit. The other two mounts are the loose fit, but with an 30 or 45 degree angle. These mounts…

Downloads
575
Likes
62
Rating
4.8
P
PrintablesDąbal

Philips OneBlade Pro 360 Face & Body Wall Mount

For the fixing of the comb and the device itself, we need 5 screws m3x8mm. For attaching the guard holder we need m3x20 or we can use glue. The current files are slightly different from the ones in the picture, I had to do some…

Downloads
575
Likes
90
Rating
4.67
P
PrintablesMax Spitzer

Philips OneBlade Stand

OneBlade Stand This stand for the original Philips OneBlade features a place to put the main unit, two additional shaving heads and two attachments. The underside has four cutouts to add rubber feet with a diameter of 6mm and a thickness…

Downloads
568
Likes
159
Rating
5
P
PrintablesLorenzoDL

Philips Gear D8443

I designed this replacement gear to fix an old Philips D6340 cassette tape recorder, but in the process I've learned that this is a common issue also in some more famous products as Magnavox D8443 or Philips D8444. Probably also other…

Downloads
564
Likes
20
Rating
5
P
PrintablesThe Caracara

Philips Oneblade travel case ''Simplicity'' 100% functional *Updated V3*

Minimalist Philips OneBlade Storage Box A compact and functional storage solution designed to hold one OneBlade handle, two combs, and two blades. Features a simple press-fit closure system for easy access. Printed on my brother’s Prusa…

Downloads
542
Likes
224
Rating
5
P
PrintablesMr_D

Philips 2200 - 3200 2cm extra

Make of bean holder for Philips printables does not allow non-commercial license org model thing:5401987

Downloads
541
Likes
48
Rating
5
P
PrintablesPeter Farell

Philipoemen - Greek General

Philipoemen - Greek General Fixed 1/31/2024 - removed old files. Philopoemen /ˌfɪləˈpiːmən/ ( Greek : Φιλοποίμην Philopoímēn ; 253 BC, Megalopolis – 183 BC, Messene ) was a skilled Greek general and statesman, who was Achaean strategos on…

Downloads
540
Likes
155
Rating
5
P
PrintablesFabTech

Philips Oneblade Wall Mount and Charging Station - Easy and Fast Print with 3 new options!

General: This stand fits 3 replacement blades, and 2 combs. The body pocket is based on my 3d scan of the oneblade, then offset .5mm so it fits perfectly. There is a hole at the bottom of the pocket for charging. Why I designed this: I…

Downloads
537
Likes
207
Rating
4.33
P
PrintablesHeine Sørensen

Philips OneBlade Stand

Note there is several models mixed into one here also this model https://www.printables.com/model/209006-philips-oneblade I printed mine in PETG 0.4 nozzle 0.3 layerhight with 3 walls and 25% cubic infill Enjoy !

Downloads
532
Likes
61
Rating
4.5
P
PrintablesNJ_Turner

Philips Multigroom 7000 custom cradle

My first design I've put together. I don't have any particular input on printing this, although I did print with supports. Had issues with zig zag supports, switched to lines (~1.5 - 2mm gaps), running horizontal to the front face of the…

Downloads
521
Likes
141
Rating
5
P
Printablesb

Philips Oneblade Blade Storage Case Box

0.15 layer height with ironing on every top surface. My print came out as a very close fit for the blade and the upper and lower parts of the container. You may want to play around with the scale of the parts to refine the fit according…

Downloads
509
Likes
70
Rating
5
P
PrintablesDave

Philips shaver stand

Shaver stand for Philips 3000 series shaver (mine is a model 3333). Print instructions Prints without supports. Optional STL for feet included to raise the stand and allow water to drain underneath it.

Downloads
500
Likes
38
Rating
4.89
P
PrintablesJoker_G

Bracket for Philips Avent Babycam

As easy as it gets! 3 parts only. 3D-printed parts only. No clipping parts that will eventually break. Large and rounded parts in order to prevent swallowing or injuries. No support needed. The camera can stand on a flat surface, while…

Downloads
491
Likes
49
Rating
5
P
Printablesjoeworks

Shaver and Grooming Tools Organizer Tray - CUSTOMIZABLE - Philips OneBlade, Braun S9 Pro, Brio Beardscape

This Shaver Organizer Tray is designed to fit my Philips OneBlade, Braun S9 Pro, Brio Beardscape, Safety Razor, Shaving Brush, Alum Block, etc. You can customize it to fit your shavers and other grooming tools by editing the included easy…

Downloads
491
Likes
119
Rating
5
P
PrintablesRok Bukva

Philips OneBlade Skin Guard

I would recommend raft so it has something to stick to the build plate. Supports: Yes Resolution: 0.1

Downloads
491
Likes
70
Rating
5
P
PrintablesAmyOrtega

Philips One Blade Stand

A stand for the Philips OneBlade and its standard accessories. -OneBlade Holder 2 Blade slots 4 Guard Slots (1,2,3,5mm)

Downloads
485
Likes
70
Rating
5
P
Printableshoeni

Philips Hue Light Strip Clip

I used countersunk 3x16 Spax screws, but similar sizes should work well, too. Check your light strip version, this one has 14mm width!

Downloads
466
Likes
66
Rating
5