Search results: pme

Sort order

Counting matching models…

P
Printablespbilek

Philips OneBlade Stand, equipment storage and charging dock

I was looking for some proper stand for my new OneBlade. Originally I was inspired by this thing by xenotrim: https://www.thingiverse.com/thing:2986584 Thank you xenotrim! https://www.thingiverse.com/xenotrim/about It was not exactly tha…

Downloads
794
Likes
171
Rating
4
P
PrintablesMecky1963

Board for development with Arduino Uno, RPi4B, ESP8266 Nodemcu, Wemos D1 Mini

I constructed this board to hold the above mentioned controller for development purposes. The part was printed with PLA with a layer of 0.3 mm. Any other filament works too. No rocket science. Step file included. F360-file on request. The…

Downloads
518
Likes
97
Rating
5
P
PrintablesThommyfix

Roman equipment for Lucky13

The Gladius can be split upright with 10mm brim or horizontally lying. After printing, the two halves of the gladius are glued together with second glue. The helmets can be printed split without support and brime. After printing, the two…

Downloads
313
Likes
94
Rating
4
P
PrintablesactualSIZE

BNC Cap - Siglent Test Equipment Accessory

I have a few pieces of test equipment in my lab that utilize the common BNC type connector. The problem is that the connectors, when unused, are commonly left unprotected. Enter 3D printing. This little cap slips on and then twists to…

Downloads
223
Likes
28
Rating
5
P
Printables100prznt

Organizer for Sewing Equipment

The Organizer contains three trays, which are mounted on a ground plate (I glued them on). Since the cutouts are very specific to my requirements, here is a detailed list of my equipment. First tray (low) some foam for putting in needles…

Downloads
189
Likes
131
Rating
0

Gridfinity Development System - Breadboard Holder

Thanks to @FruitieX for the great original model. Modifications from their model: Resized the opening to work with the Added pass-through holes to allow wires to go under the gridfinity baseplate. Removed some extra features that were…

Downloads
181
Likes
42
Rating
4.75
P
PrintablesGarage Maker

Uwatec bungee mount deepmeter

I print it in PETG and recommand to use 4 M3x6 or M3x8 screw.

Downloads
158
Likes
11
Rating
5
P
PrintablesOčko

beware of electrical equipment (no MMU reqired)

Print MK3.5 0.2mm Strukural Prusament PLA Supportn:None Infill_0% Seam position: Random First layer: 225/60°C Other layers: 220/60°C

Downloads
133
Likes
49
Rating
5

16mm 110 film development spiral

Overview Simple one-sided center-loading spiral for 16mm film processing. Fits to the AP and Paterson tanks. Up to 1.7m film length Up to 3 spirals in the 2x135 tank 16mm, 110 Instamatic, 2x8mm film format 250ml working solution Printing…

Downloads
129
Likes
21
Rating
0
P
Printablessash

3D Printer Equipment Tool Stand

tool stand for accessories/tools of the 3d printer

Downloads
92
Likes
8
Rating
0
P
Printablesheximcz

Waveshare 7" LCD / Raspberry Pi Development Holder

Printed on Ender 3 Pro. Sliced in PrusaSlicer 2.6.0 Alpha6. I used organic supports. Infill pattern grid with 25% density. LCD: Brand: Waveshare SKU: 18625 Part Number: 7HP-CAPQLED

Downloads
86
Likes
7
Rating
0
P
PrintablesMelodicCougar7

Tabletop Table with Basic Equipment: A Simple, Basic Table for Your Favorite RPGs

This is a very basic table for any RPG, such as Dungeons and Dragons, Pathfinder, etc. It measures 1 inch by 2 inches and is to scale for miniatures of that size. It only uses 2 meters of filament, so it can be a great addition to your…

Downloads
65
Likes
12
Rating
0
P
PrintablesPhilipp626

Equipment hook for archery

A simple hook to hang everything on your quiver or your belt. No support needed.

Downloads
57
Likes
13
Rating
0
P
PrintablesMartinS

Chainsaw equipment holder / Držák vybavení řetězové pily

Keep all your chainsaw accessories in one place. The holder can be used for files, wrenches, spare chains and bars, and can also be used to hang gloves, etc. Variants with Stihl and Husqvarna logos, and plain without logos. Vybavení vaší…

Downloads
51
Likes
22
Rating
0
P
PrintablesCadoEnterprise

Nucleus Development Hive – 3D Printable Modular Hive – Arnia Modulare per Sviluppo Nuclei

Nucleus Development Hive This project was created to develop a small hive specifically intended for the development and growth of a bee colony. The hive has been designed for 3D printing and, in the main version, makes use of practically…

Downloads
49
Likes
23
Rating
0
P

Protective equipment for a furniture.

This is safety cabinet coupling, but you can use it for connecting of anything else:-)

Downloads
35
Likes
4
Rating
0
P
PrintablesMariusT

Constant Voltage Regulator for Astro Equipment

This is a 12V buck boost regulator which can be mounted directly to a battery. Because it is a buck-boost converter it will always output 12V (or any voltage set by the user) even if the battery voltage is lower than 12V. It can even…

Downloads
29
Likes
11
Rating
0
P
Printablesrj_ruin

American Morse Equipment keyer base and leg strap attach plate

I wanted a way to hold down my keyer, especially since this AME key has exposed parts that make it difficult to support with the other hand. The base allows a passthrough for the cable or installation of an audio jack, and then can be…

Downloads
29
Likes
1
Rating
0
P
PrintablesOčko

beware of electrical equipment (no MMU reqired)

Print MK3.5 0.15mm Strukural Prusament Petg Supportn:None Infill_0% Seam position: Random Horihontal shells TOP: 6 , Bottom 6 First layer: 240/85°C Other layers: 245/90°C

Downloads
29
Likes
9
Rating
0
P
Printablest5montecarlo

Foot Adapter for Treadmill or Other Heavy Equipment

A common complaint about treadmills is that the feet wear holes in mats and carpeting. The cause is the small diameter of the foot, putting a large load per area onto the mat. This adapter fits over the original foot and spreads the load…

Downloads
26
Likes
7
Rating
0
P
PrintablesMartin Prenger

Wall hook for electric gardening equipment

I needed a good solid hook to hang my lawn trimmer and other small electric gardening equipment on. I designed this hook in such a way that it facilitates equipment with power cords attached at various positions in the hand grip. The…

Downloads
20
Likes
11
Rating
0
P
PrintablesYeegus

Vileda Origo 2 equipment holder set

Hook and broom/mop holder for the Vileda Origo 2 Cleaning Trolley. You might have to clean up the edges a bit after printing, as it is a tight fit.

Downloads
3
Likes
0
Rating
0
P
PrintablesAviation Design

1:400 Ground Service Equipment (GSE) For 1:400 Airports And More

Here it is for all 1:400 model airport builders and fans alike printable, detailed, accurate 1:400 Ground Service Equipment! With some help from ConnerWS (not directly I remixed his stuff), I have scaled down and edited his series of…

Downloads
2,074
Likes
48
Rating
0
P
Printablesthinbegin

Pa-110 : A 110/16mm film development reel v2 (Paterson-fit)

This is completely new version! I shoot and home-develop a lot of different film formats, and none of the 110 film development reel solutions really did it for me, so I started tinkering around, and this is my latest - ALL NEW - design,…

Downloads
2,055
Likes
113
Rating
5
P
PrintablesAviator67

Saturn V - Launch Umbilical Tower (LUT) - Additional Equipment - 1:60 Scale

Please make sure to download the “ All Model Files ” and the “ All Other Files ” zip files so you get all of the .stl's and also the .pdf files that include the instructions and equipment placement drawings. (Link is near the bottom of…

Downloads
2,005
Likes
249
Rating
5
P
PrintablesCNC Kitchen

BumpMesh.com STL Texturizer

Try out BumpMesh.com ! BumpMesh is a free, open-source, browser-based tool for applying custom displacement textures to your 3D models - no account, no software install, and no expensive licenses required. Simply load your STL, OBJ, or…

Downloads
1,624
Likes
2,375
Rating
4.86
P
PrintablesMaciaIT

Film Development Tank 35mm 250ml

After paying a ton of money on chemicals it seemed really stupid to spend another 30€ on a simple plastic container. So I designed this fully 3D printed development tank. If you're cheap like me I guess you don't really need to develop…

Downloads
1,517
Likes
253
Rating
4.83
P
PrintablesPlants X Tech

COBLE - Collection Of Bespoke Laboratory Equipment

The paper is finally published and fully open-access! https://bsapubs.onlinelibrary.wiley.com/doi/10.1002/aps3.11562 We have only scratched the surface in developing 3D printable tools for COBLE. We began with microscope adapters and a…

Downloads
708
Likes
240
Rating
4
P
PrintablesIR Blinx

Toy Kitchen Equipment

A Collander, a cooking pot with lid and a frying pan

Downloads
616
Likes
122
Rating
5
P
PrintablesVelvia

4x5 film development tank

DO NOT GLUE THE TOP FILM RETAINER It should be loose so you can slide film in/out. Use a dummy sheet of film to get the tolerances right before permanently gluing together. Open source with STEP files 26.02.23 Updated to v3 Light proof…

Downloads
607
Likes
117
Rating
5
P
Printablesthinbegin

Jo-110 : A 110/16mm film development reel v2 (Jobo-fit)

This is completely new version! I shoot and home-develop a lot of different film formats, and none of the 110 film development reel solutions really did it for me, so I started tinkering around, and this is my latest - ALL NEW - design,…

Downloads
579
Likes
29
Rating
5
P
PrintablesSPRKPLG

Skellareel Paterson Development Reel for 4x5 and 2x3 (2-1/4 x 3-1/4) Sheet Film

Update 5-Jul-2021: Added a mid section to the 45 version as sometimes under heavy agitation the film edges will poke out the sides. ---------- Not blocking commercial on this one, and included the Fusion and Step files for you to improve…

Downloads
564
Likes
49
Rating
5
P
PrintablesLemlurker

Super 8, 8mm, 16mm film development tank and spiral

this is a reupload of a design by mb_maker on thingiverse with a few alterations, it is an adaptable super 8, standard 8 and 16mm development tank. i have designed my own super 8 tank here :…

Downloads
555
Likes
32
Rating
0
P
PrintablesŁukasz Stępka

Case "A" EZT EN57-001 TT 1:120 ( model under development )

Model dla zaawansowanych modelarzy w fazie rozwoju. "Case EZT EN57 CZŁON A" Model ze zdjęcia wykonany metodą druku FDM przeskalowany do 1:220 (skala Z) (plik stl. w skali TT 1:120) Materiał: PLA Zalecana dysza 0,25mm Człon silnikowy,…

Downloads
555
Likes
40
Rating
5
P
Printablesthinbegin

Pa-8x11 : A Minox/8x11 development reel (Paterson-fit)

I shoot and home-develop a lot of different film formats, and after releasing a few different reels for lesser used formats (110, APS, disc), I started getting approached by people wanting one of equal quality for the Minox 8x11…

Downloads
551
Likes
21
Rating
0
P
PrintablesMrKit

Equipment Ladder - O/S/HO/N/Z Scale

Equipment ladder, great for tall structures such as silos, tanks, conveyer system and what ever you see a tall ladder on. Replacement ladder, we have all broken at least one! Print it, cut it to size, paint it and install it. Available in…

Downloads
521
Likes
44
Rating
0
P
PrintablesCanabalooza

Logitech/Saitek Heavy Equipment Side Panel Tablet Mount Bracket

Designed to work with the ARKON Drill Base Tablet Mount from Amazon located here, https://www.amazon.com/gp/product/B00PZZYR4K/ Extra hardware required 2 x M5x40mm Button Head Cap Screws and nuts 4 x M4x8mm Button Head Cap Screws and nuts…

Downloads
502
Likes
30
Rating
5
P
Printablesthinbegin

Pa-APS : An APS film development reel (Paterson-fit)

I shoot and home-develop a lot of different film formats, and less-standard film development reels (like APS) are hard to come by, and expensive AF when they do creep onto the market. So.... I made my own. This one is designed to work in…

Downloads
471
Likes
35
Rating
0
P
Printablesgzumwalt

A Case and Calculator for the Lilygo T-Display-S3 Touch Development Board.

I designed this case for the "Lilygo T-Display-S3 Touch Development Board" which features a 320 by 170 color display and a touch screen. I'm planning on using this board in upcoming projects and decided to create this case for it. In…

Downloads
444
Likes
27
Rating
4.67
P
PrintablesSireInsectus

ESP32-WROOM-32U Development Board

See https://www.amazon.com/gp/product/B0811KLGDD/ref=ppx_yo_dt_b_search_asin_image

Downloads
401
Likes
21
Rating
0
P
Printablesthinbegin

110 Film Development Reel (Paterson-fit)

There is a newer version of this, with some great improvements. Check out my profile, or click here to go to the new version UPDATE: I added tweaks 8, 9, & 10 described below, today (Nov 15, 2020) I shoot and home-develop a lot of…

Downloads
374
Likes
24
Rating
0
P
Printablesjunesphd

Kill Team 2024 Marker and Equipment

Scaled from pictures so dimensions maybe somewhat off. Added printable PDFs for objective, 20mm tokens, and barbed wire

Downloads
369
Likes
33
Rating
4
P
Printablesbglasford1

Apollo LUT Equipment

This model consists of the equipment for the Apollo Launcher / Umbilical Tower used to launch the Saturn V rocket. This is part of the Apollo Umbilical Tower model. See the parts spreadsheet of that model for a complete list of parts by…

Downloads
369
Likes
31
Rating
0
P
PrintablesMicah

ESP32 D1 Mini Development Board Case Click Shut WEMOS + STEPS File

ESP32 D1 Mini Case Click shuts nicely Easy print. Dimensions are in the pictures Check out my other stuff https://www.thingiverse.com/micahjj/designs Feedback and Makes I really like getting feedback and despite having thousands of…

Downloads
358
Likes
24
Rating
5
P
PrintablesCyclone-6

Meshtastic Enclosure For LILYGO T-Beam ESP32 TTGO Development Board

An enclosure for the LILYGO Meshtastic T-Beam ESP32 TTGO Development Board with LCD and rear mounted 18650 battery mount. Requires four (4) 16mm M2 screws. OpenSCAD file requires BOSL2 (https://github.com/BelfrySCAD/BOSL2) and nutsnbolts…

Downloads
351
Likes
30
Rating
4
P
PrintablesJerrod H

Development Stand for Arduino GIGA R1 WiFi and GIGA Display Shield

This is a development stand and enclosure for the Arduino GIGA R1 WIFI and its GIGA Display Shield , based on the basic enclosure provided by Arduino themselves here on Printables . Although I think it is very clever that the GIGA Display…

Downloads
344
Likes
15
Rating
0
P
PrintablesJBoneng

SCUBA Equipment Hanger for BCD, Wing/Bp etc

A hanger for B.C.D / Wing-Backplate, and other SCUBA gear. Designed after the Subgear design, that I can`t find anywhere anymore. The design also includes a mount for DIN regulators. I have included both an un-split version, for those of…

Downloads
337
Likes
40
Rating
5
P
PrintablesDMUX

Flieger Kappmesser

This is a fully functional replica of a WW2 German Gravity Knife. It was used by paratrooper units and the air force. Knife is "Type-2" version. The original knife is very rare and expensive. Now you have the chance to make one for…

Downloads
326
Likes
56
Rating
5
P
PrintablesAkio

Futuristic ESP8266 development case with Wagos

For the Get creative with WAGO contest I thought it would be cool to have a case that houses a d1 mini esp8266 development board and Wago connectors to do the test setup instead of a breadboard. You need to print the following files:…

Downloads
315
Likes
712
Rating
0

Picatinny Receiver Development Kit

This Picatinny Receiver Development Kit is a CAD-ready model of a Picatinny-spec rail receiver that can be quickly adapted and customized to mount virtually anything to your blaster. The model isn't a usable tactical rail receiver without…

Downloads
293
Likes
31
Rating
5
P
Printablesmort_jack

Settlers of Catan Resource and Development Cards

IMPORTANT! Watch the slicing tutorial if you do not have a dual extruder or something similar! Description Cards that are roughly the size of the original Settlers of Catan resource cards. The cards, when printed in PLA, feel and handle…

Downloads
286
Likes
34
Rating
0

Railroad Signal Equipment Box

Models contain two types of auxiliary signal support equipment. Typically used to store the electronics equipment used to power nearby track signals. Two types are included: 1. is the standalone box which is located nearby 2. Is the type…

Downloads
269
Likes
39
Rating
0
P
Printablesthinbegin

110 Film Development Reel (Jobo-fit)

There is a newer version of this, with some great improvements. Check out my profile, or click here to go to the new version I shoot and home-develop a lot of different film formats, and I found myself unsatisfied with the “solutions” I…

Downloads
268
Likes
14
Rating
0
P
PrintablesMakoto

Heltec WiFi LoRa 32 (V2) Development Board Case

This is a case for the Heltec Wifi LoRa 32 (V2) development board ( https://heltec.org/project/wifi-lora-32/ ). I wanted to be able to have a case that can hold a lithium battery so this is what I came up with. I've included a version of…

Downloads
258
Likes
17
Rating
5
P
PrintablesSzymon Adamczyk

Weapons and equipment for micro jet fighters

I've designed some most common and widely used weapons for my jets. The set consists of: AIM-9, AIM-7, AIM-120, R-73, R-27, R-77 air-to-air missiles AGM-88 Harm, AGM-65 Maverick, Paveway II, Kh-31 Krypton, Kh-25 Kegler air-to-ground…

Downloads
256
Likes
43
Rating
5
P
Printablesthinbegin

Jo-APS : An APS film development reel (Jobo-fit)

I shoot and home-develop a lot of different film formats, and try as I might I couldn't find a reel/holder for APS films, so I designed one. This is the result. Oh, and if you are looking at this, I'm sure you've realized that APS film…

Downloads
256
Likes
23
Rating
5
P
Printablesthinbegin

Jo-8x11 : A Minox/8x11 development reel (Jobo-fit)

I shoot and home-develop a lot of different film formats, and after releasing a few different reels for lesser used formats (110, APS, disc), I started getting approached by people wanting one of equal quality for the Minox 8x11…

Downloads
256
Likes
17
Rating
0
P
Printablestyler

Anycubic i3 Mega Equipment Box (Sideways)

This is a new variation of my equipment box that I made back in March of 2020 for the Anycubic Mega I3 Mega. You can check out my older design here: https://www.printables.com/prints/33156-anycubic-i3-mega-clip-on-box This one is a bit…

Downloads
256
Likes
33
Rating
5
P
PrintablesSHR3D.eu

DIN rail development panel

[CZ] Upravený držák na DIN lišty ( https://www.thingiverse.com/thing:3433772 ) doplněný o úchyt tří komponent SIEMENS a tří 5mm led pro případnou indikaci stavu. [ENG] Modified holder for DIN rails (…

Downloads
251
Likes
65
Rating
5
P
PrintablesChild Life Tech

Hospital Room and Equipment

This a recreation of a hospital room intended to be utilized as a playset for children to learn about and normalize their hospital experience. It includes the base of the room and common furniture found in hospital rooms as well as…

Downloads
237
Likes
18
Rating
0
P
PrintablesRemy

Enclosure for ESP8266 Development Board NodeMCU V3

This is an enclosure case for the NodeMCU V3 development board and base. ESP8266 Development Board NodeMCU V3 can be found here: https://www.amazon.com/dp/B07DK2LRJJ/?coliid=I37O15QSY8H0VA&colid=1PKM0NV2CRFRC&psc=1&ref_=lv_ov_lig_dp_it

Downloads
236
Likes
19
Rating
5
P
Printablesgz2zg

2x830 Point Breadboard Tray for ESP32 Development

Fits two 830 point breadboards with spacing to allow an ESP32 dev board to span between them, solving the problem with those boards not fitting common breadboards with any points to spare. As designed it works perfectly for Elegoo brand…

Downloads
236
Likes
37
Rating
4

Floor stand for tower orientation of APC UPS / 2U equipment. Fits SMT2200RM2U, may fit others ("schneider electric")

Floor stand for tower orientation of 2U equipment. I designed this for my APC SMT2200RM2U. Should fit 2200 and 3000 models of APC UPSes (or “schneider electric”). May fit other 2U UPSes and equipment. Be careful not to block any…

Downloads
235
Likes
16
Rating
5
P
PrintablesArsenalSkala

1/144 Graze Close Combat Equipments

A collection of equipments known to have been used by Gjallarhorn's ubiquitous Graze mobile suit. The files within can be used to make the following gunpla accessories : GR-H01 Battleaxe Halberd GR-H02B Battle Blade (2 variants based on…

Downloads
231
Likes
39
Rating
0
P
PrintablesTauchtNix

Film Development Tank for 135 and 120 film

MaciaT's developing tank worked really fine for me. It printed watertight in ABS+ without any acetone smoothing. But I had difficulties loading the film in the dark. A comparison to an old spiral showed that the grooves used to be much…

Downloads
229
Likes
37
Rating
5
P
PrintablesBL3D

Magnetic Dog Agility Equipment

I modeled the equipment to use with a whiteboard when building courses. Scaled roughly for 4ft=1inch scale so they fit on a 18x24in whiteboard representing a 90ftx120ft ring. highly recommended to print equipment on its side rather than…

Downloads
229
Likes
23
Rating
0

gym equipment for lucky/dummy 13 (including weights)

gym equipment including: 1x barbell 2x dumbell 2x 20kg plates 2x 15kg plates 2x 10kg plates 4x 5kg plates 4x 2.5kg plates 4x 1kg plates

Downloads
229
Likes
35
Rating
0
P
Printablesjmehan

Rancilio Silvia Equipment Holder Remix

Stronger version of the original. Slightly bigger.

Downloads
222
Likes
33
Rating
5

Shipment cargo containers

Here is another archmage item. Hope you find it useful for your sceneries! To support my work and get access to my miniatures please visit https://www.patreon.com/roleplayingminiatures Category: Games

Downloads
218
Likes
22
Rating
5
P
PrintablesHonex

Toy Kitchen equipment

Toy Kitchen Equipment: Casserole (stock pot), saucepan and knife with cutting boards. Knife assembly needs four M2.5x10mm bolts. Pan should be printed in normal position with supports (turn the stl upside down) . Panhandle is connected to…

Downloads
216
Likes
60
Rating
5
P

Nurse Equipment Holder

A Greek themed stand for all the equipment a nurse needs to bring to the hospital on a daily basis. It includes a stethoscope holder, two large slots for box cutter and trauma shears, two hollow Corinthian columns for pens/sharpies, and a…

Downloads
215
Likes
68
Rating
5
P
PrintablesShanold

TPU bike Equipment Strap

A simple tpu strap to hold equipment to your bike. With built in supports so just slap down load in some TPU and print away! Its super strong and the only part I have ever had break was the Little Loop that makes it easier to torque down!

Downloads
210
Likes
90
Rating
5
P
PrintablesHyperV3D

Arduino UNO Development Stand Remix

Remix of an Arduino Uno stand by tonyrod on thingiverse. I modded this years ago and figured I share here on Printables in case it was of use to anyone. License type matches license of original model

Downloads
209
Likes
76
Rating
5
P
PrintablesMT_KEG

Equipment Wall Hanger Mount (Ego 530)

This Equipment Wall Hanger Mount was modeled in FreeCAD using a parametric approach. Users can manipulate the model to suit their individual needs through the manipulation of the “parameters” spreadsheet within the FreeCAD model. The STL…

Downloads
200
Likes
26
Rating
5
P
PrintablesAdamK

M5Stack Atom Lite IOT Development Board Mounting Plates / Covers

Mounting plates/covers for M5Stack Atom Lite ESP32 IoT Development Boards. I use these awesome little and cheap boards for measuring water levels in my tanks, light control, remote buttons and more! I couldn't find any covers. cases or…

Downloads
199
Likes
20
Rating
0
P
PrintablesSteveMa

Rancilio Silvia equipment holder

I needed something to store the parts of daily usage for our coffee maker. The basic model is created in freecad, the pattern in the bottom is done in tinkercad. I printed it with some supports for the upper holders. Its done in nice…

Downloads
190
Likes
38
Rating
0
P
Printablesvidsky

Case for the HiLetgo ESP-WROOM-32 Development Board

I could not find a case that would fit my ESP32 that I found on Amazon, titled “HiLetgo ESP-WROOM-32 ESP32 ESP-32D Development Board” There was a model that said it did, but in fact it did not. Simple re-scaling just made new problems…

Downloads
189
Likes
11
Rating
5
P
Printablesthinbegin

110/16mm Film Development Reel - v1 (Nikor/Stainless-fit)

I shoot and home-develop a lot of different film formats, and I found myself unsatisfied with the “solutions” I had for developing 110 film. I made a version specifically for my Jobo dev tanks, and got a lot of feedback from people asking…

Downloads
186
Likes
21
Rating
0
P
Printablestor_cz

Photographic Paper Development Tweezers

Printing with PLA is recommended for optimal strength. No supports needed. I also suggest printing 2 or 3 pieces with variant colors for different chemical substances (developer, stop bath and fixer) to avoid mixing chemicals.

Downloads
186
Likes
17
Rating
0
P
PrintablesJp_Railfan
Downloads
185
Likes
19
Rating
0
P
PrintablesSedak

| Catan | Development cards

| BASIC DESCRIPTION | development cards for the base game and seaferers expansion for the base game you need: 14 Knight cards 5 Victory Point cards 2 Year of Plenty 2 Monopoly 2 Road Building for the 5-6 players base game you need: 20…

Downloads
184
Likes
21
Rating
0
P
PrintablesLemlurker

Super 8 development spiral for patterson 5 spool tank

this is a model to enable the home development of super 8 motion picture film. it holds a single cartridge (50 ft) of super 8 film emulsion side out in 3 layers. printed in transparent material enables fogging using LED strip lights…

Downloads
182
Likes
20
Rating
0
P
PrintablesPlanmarks

KIISU Development Board Case

A 3D printable case for KIISU Development Board V4A by Rainwalker. A fun credit card sized development board that is compatible with Flipper Zero firmware and features some additional sensors and functions. Learn more about KIISU:…

Downloads
180
Likes
13
Rating
0
P
PrintablesHannibal

IKEA SKADIS thread mount for 1/4" threaded camera equipment

Just print it with the filament type and color of choice. I used white PLA from the brand CST, which is a bit more flexible than other PLA I know. It's very sturdy, I use it with a light attached to an arm.

Downloads
175
Likes
25
Rating
5
P
Printablesno one

ESP-32 NodeMCU Developmentboard (AZ-Delivery)

Simple Model of the ESP-32 NodeMCU Developmentboard by AZ-Delivery. Can be used to get Placement of the USB-Port right.

Downloads
168
Likes
6
Rating
0
P
Printablesmkgin

Kiisu v4 development board case (beta)

A small thin case for for the Kiisu v4. See https://kiisu.io/ for more information about this board. less than 90 x 58 x 8 mm without the lanyard/keychain part Uses the acrylic piece that ships with the dev board No hardware, snaps…

Downloads
165
Likes
16
Rating
5
P
Printables大陆 罗

3D Scanned Model of CR-Scan Raptor: Ideal for Accessory Development

我们使用高精度 3D 扫描仪对 CR-Scan Raptor 进行了细致的扫描,创建了精确的 3D 模型。此模型旨在帮助开发人员和工程师更好地设计和制造 CR-Scan Raptor 的各种配件。通过这个详细的 3D 模型,您可以彻底了解设备的各个方面,为配件开发提供坚实的基础。立即下载并开始您的创新之旅!

Downloads
165
Likes
11
Rating
0
P
PrintablesHNCXTech

Highly Customizable Potentiometer Caps for DJ Equipment - dimensions, pot dimensions, pot angle relative to pointer, multi-material, multi-part

A highly customizable set of caps for any potentiometers in use on DJ equipment. Specifically designed for the D pots commonly found in mixing gear. The customization options allow for a simple switch to round pots. The design comes in…

Downloads
158
Likes
55
Rating
0
P

LEGO Sports Equipment

LEGO Sports Equipment

Downloads
147
Likes
42
Rating
0
P
Printablesdfense

Holder for Seek Firepro X thermal imaging camera (firefighter equipment)

The original holders were inconvenient foam material and did not hold the cameras well enough to be (quickly) transported in our “go-box”. Printed in ABS (TitanX) but PETG or even PLA works as well. Screw holes are sized for M3, but could…

Downloads
143
Likes
14
Rating
5
P
PrintablesMach7

Development tank for large format sheet films 13 x 18 cm

Development tank for large format sheet film 13 x 18 cm ( 13x18 ). Fits 8 sheets. Printed with PLA and then coated with epoxy, as liquids are poured in . The inside holder is intended also as a drying rack. Also I upgraded the inside…

Downloads
140
Likes
21
Rating
0
P
PrintablescruX

USB stick storage holder with extra space for caps and other equipment

Storage for USB Pendrives with big space for USB caps, Cardreaders, USB Hubs... Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2mm Infill: 15% Filament: Prusament PLA Galaxy Black Category:…

Downloads
139
Likes
19
Rating
5
P
PrintablesFattyPatty

Wrist Roller Workout Equipment

This is a printable wrist roller that is compact and a versatile workout accessory to help build grip strength and forearm muscles. Print the bottom weight holder that fits all weight plates with center holes. The cylindrical handle has a…

Downloads
139
Likes
14
Rating
5
P
PrintablesBoB_the_printer

Training pole soccer equipment bar workout football

The training pole is ideal for team or indiviudals that want to improve their training abilities. There are two holes on the bottom part to store the poles when you are not using it anymore. Print characteristic: for the cilynders: - line…

Downloads
139
Likes
43
Rating
0
P
PrintablesS U

DJI Air 2S equipment rack

This is an equipment mount for the DJI Air 2S drone. Thank you to Isaiahsdad for the design of the upper bracket (however, I did have to redesign it as the original model was not able to import properly):…

Downloads
136
Likes
10
Rating
0
P
PrintablesDavid Cook

Jumper Xiake 800 VTOL - Vented FPV Canopy by Beastmode-Development

Hello, I wanted a good fitting, vented FPV canopy to use on the Jumper Xiake 800 VTOL. I found some online, but decided to 3D scan mine and make an exact fit 3D model that could be used to add various styles/designs of cooling vents. I…

Downloads
135
Likes
1
Rating
0
P
PrintablesLinuTec

Bruder Absperrzeug Leitbake / Brother barrier equipment delineator

Selbst konstruierter Leitbaken. Druckzeit (Leitbake mit Fuß): 1h Material: PLA (Bake) & PETG (Leuchte, Fuß) Maßstab: 1:14,5

Downloads
134
Likes
30
Rating
0
P
PrintablesFreshmeat

Soldiers of the imperium - special equipment

Update 17/1-20: Models clean up by netfabb. This is a reupload of my special equipment troopers. I improved a bit on the plasma gun as well. The meshes are designed for 0.2 mm FDM. Category: Games

Downloads
132
Likes
16
Rating
0
P
Printablesmfischer79

1U & 2U Vertical Mount Bracket for Network & UPS Equipment

1U & 2U Vertical Mount Bracket for Network & UPS Equipment Designed for universal compatibility with square hole fasteners. For best durability, use PETG or a stronger filament.

Downloads
127
Likes
22
Rating
0