411 models
I have a bunch of different Ryobi 18V Power tools and an assortment of One+ Lithium batteries. I thought it would be great to make use of these batteries for other things. I decided to make a Power station that could charge USB devices…
Print approx. €23.41–€28.61 excl. taxPreliminary estimate for one variant
Door catch & stopper / window holder with firm fit and good grip to hold the door or window open. It is easy to attach because both sides match the size of a Tesa Powerstrip: one for the window frame and one for the wall or skirting…
Print approx. €0.57–€0.70 excl. taxPreliminary estimate for PETGSource material: PET
Batteries that are known to fit: US models WA3525, WA3575 and WA3669. I printed several other holders, and even the ones that said they were for US models would not hold my 20V Worx PowerShare batteries. Some were way too tight. Some…
Print approx. €3.28–€4.01 excl. taxPreliminary estimate for one variant
Primarily inspired from this Instructable I build an ATX-Powersupply. As I had a metalcase laying around I just printed the frontpanel. List of elecric compnents: See Instructables. Size: 234 x 96 mm Adapt it for any other housing using…
Print approx. €2.17–€2.65 excl. taxPreliminary estimate for PETGSource material: PET
Auf dem Markt habe ich keinen Cage für die Canon PowerShot G5Xii gefunden. Also hier nun meine Kreation. Die Kamera wird mit einer Schraube an ihrem Stativgewinde im Rahmen befestigt. Ich verwende diese:…
Print approx. €1.02–€1.24 excl. taxPreliminary estimate for PETGSource material: PET
A small and minimalistic bracket for mounting one of my powerstrips. Same bracket will work for both sides. Update: 22.04.2023 - Added drawing with some dimentions. The powerstrip I'm using is a little bit ‘fat around the belly’ 🤭The…
Click connector plate for attaching power supply units or power strips to Multiboard with cable ties. (Matching the “Underware” cable management system from HandsOnKatie.)
To do the upgrade you need the following parts: 1x Frontplate (printed) 1x USB Extension cable 1x Powerswitch Extension cable You can find the upgrade instructions here: installation guide If you want a backplate, have a look here:…
Attach your powerstrip to the side to save space. With the click system it is attached in seconds.Two variants are provided, left and right. use more top_X.stl for longer powerstrips.
Better version shipped with HSW Screwiverse: https://www.printables.com/model/488798-hsw-screwiverse-flat-wall-tapeglue-brackets Attach this bracket to a wall using TESA Powerstrips or a similar product. Hotglue might work as well,…
Straight twist lock oil funnel. Originally designed for 6.7 powerstroke in a Super Duty. Probably will work with other ford engines. Printed in PETG. 3 layer wall thickness 30% infill
Simple clip-on powerstrip holder. Fast and easy to print, use a single 3 or 4mm screw for mounting. Fits most of the "EU Schuko Mehrfachsteckdosen", even the new design from Hornbach. Files: standard-Version = tight fit; powerclip_l =…
(Every file is x1, print once - for each file name - unless otherwise marked. (The .3mf and .stls are the same thing for each file name, with or without lettering objects for multi-color; you don't need to print both! Instruction PDFs…
Enlarged and modified version of @BobMcGlobus_870140 click connector plate for attaching power supply units or power strips to Multiboard with cable ties. (Matching the “Underware” cable management system from HandsOnKatie.) The original…
Although there are several models available on another site… I found them all to be unnecessarily too big and complex. Taking inspiration from Area51 's nice and minimal mount for Makita batteries, I set out to design something sturdy and…
Mount for Brennenstuhl powerstrips
Be aware that some models differs from the one I bought, especially the size of the cable attachement. Check that before printing pls.
i have modified the insert-hollow-dual model so that i can attach the wall with tesa powerstrips. the holes have a back of 1mm and the tube is 0.75 mm longer so that the inserts rest directly on the wall
MASSIVE VISUAL UPGRADE FOR ENDER 3 PRINTERS POWERSUPPLY RELOCATION UNDER THE BED (IN TESTING) (Is not usable for PRO and V2) SUPPORT ME BY PAYPAL!!!: https://paypal.me/zltncsk If you woul like to see new upgrades for 3D printers, and…
Attach your Ikea Skadis to walls or furniture without having to drill holes. You can use Tesa Powerstrips tape or any kind of alternative adhesive tape for the same purpose. Warning! Please use the appropriate tape and for the appropriate…
I liked the power strip support, but had not enough space on the sides. so i just rearanged the holders to be screwed in front and back. i printed it with minmal support, just to make sure it comes out great. you can also print it without…
I think Ryobi is missing a huge market opportunity. I have a ton of Ryobi Tools and Batteries (1000+ Wh worth!). I've made several prototypes that use Ryobi 18V batteries to charge USB ports or run a 13.8V regulated cigarette socket. I'd…
PowerStrip wie Tesa PowerStrip in super klein und mittelgroß Update 21.05.2023: PowerStrip_spezial hinzugefügt Update 29.05.2023: PowerStrip_universal hinzugefügt…
This Worx PowerShare 20V battery holder mounts to the wall and positions the batteries horizontally at a slightly upward angle. This allows for the batteries to be stored closer together than the traditional vertical holders. ***PLEASE…
Visual upgrade for Ender 3 Pro Printers Is not usable for Ender 3 and not tested on Ender 3 V2 (feel free to try it out for the V2) Support me by covering a coffee to get/keep me going! Venmo: @dannyjvj SUMMARY: After upgrading my PSU fan…
Print the model on the side with supports for optimal result and strength.
A simple to print yet very sturdy and reliable cable clip for cable management. Designed for Ikea Besta, Billy, and other 18mm wide, or wider, furniture, boards, etc. You can still add and remove everything without catching on the cable…
Dimensions had to be adjusted from the original model to fit the Koppla size. Printed at 50% infill in PLA.
Hardware needed to install Cap/Button Screw M4x6 - 8pcs (Screw on PSU) Cap/Button Screw M5x10 - 2pcs T Slot Nut 2020 M5 - 2pcs Cap/Button Screw M4x30 - 1pcs (M4 Washer maybe needed) Print Settings Material: PETG Infill: 30% Perimeter: 3…
Holder for the Dyson V10 powersupply with cable management. The holder itself has a loose fit, but once the cable is in place the holder will stay in place as well. It unfortunatly needs supports for the cable channels. You can avoid…
Use these Powerstrips: TESA 58000 tesa® Powerstrips® Large, 5,0 x 2,0 cm I use this hook in my bathroom for a towel, but you can use it for every purpose. Tested glued to tiles in my bathroom. Has lasted bath towels for a year!
In order to attach this multiple socket outlet securely on a wall I created this holder. You need two for the unit.In order to attach this multiple socket outlet securely on a wall I created this holder. You need two for the unit. After…
Simple and easy to print mounting bracket for a powerstrip. Prints without support. Just print it in upside down orientation. Dimentions of the powerstrip used: height: 40.5mm width: 53mm cable: 31mm centered skrew used: 4,0x20mm Added a…
This is a parametric wallmount for power supplies. With cable hotswap cabel channel. I'm sure i have seen something like this bevor, but i couldn't find it anywhere so i made my own with ondsel (FreeCAD should work also). Have Fun. I…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Long time ago I have modelled this small hook for hanging small things at places where I can use the Tesa power strips. I used them frequently in my home. print this in any favourable colour or material like PLA or PETG
I adapted the model to fit a 53x40mm Powerstrip
My Version of the Jackpot and Power supply Case for the Lowrider V4 from V1 Engineering https://www.printables.com/model/1034840-lowrider-4-cnc For the Power supply i'm using this 24V 120W one from Aliexpress:…
For power strips of 49x40 mm. Printable without supports. Same for both sides
I made this for a specific power strip from Harbor Freight (national chain of hardware stores selling cheap (read crappy) hardwares). It works for other small power strips I have. I made it to bolt my power strip to pegboard but you can…
This is a remix of Worx 20v and 40v Battery Holders , which was incomplete and has not been updated in a year. The previous design did not allow the battery to seat fully. I have modified the design and now the battery clips in properly.…
A box for the DND spellbookcards: Martial powers & races set Parts List upto 8x 6x3mm magnets
Threads are roughly M32x3.5
dies ist ein Remix von: https://www.printables.com/de/model/905062-ecoflow-power-stream-cover/ vielen dank erstmal an dieser stelle an den Urheber! :-) Ich habe das Cover auf meine bedürfnisse und Gegebenheiten angepasst um einen 2x120mm…
Halteklammern für Netzteile zur Untertischmontage. Anhand der Skizze können die Bemaßungen in Fusion 360 geändert werden (Breite und Höhe des jeweiligen Netzteiles) und die Konstruktion wird entsprechend angepasst. Bestes Ergebnis mit…
Needed something to hold two power supplies so used the one closest to the dimensions I needed. I moved the screw tap to be centered, removed one of the multiconnect slots and lowered from 100 mm to 55 mm. I had a comment that the screw…
Since my baseball cap collection was getting bigger and unattractively stacked on the shelf, I was looking for a holder for the caps. Since I didn't like the holders I could find - only a hook on which the cap then starts sagging or the…
This Modell is a Copy of the original Ecoflow Disconnector Tool which is shipped with the Powerstream. I recommend printing it with the lowest Layer Heigh possible 0.1mm or lower. Mine is printed with FormFutura CarbonFil. PETG or ABS…
GER Worx Akkuhalter für Powershare Akkus. Vorgesehen zum anschrauben, Lochabstand 25 mm, ausgelegt für ISO 7380-1 M6 Schrauben Kein support notwendig Erstellt mit Designspark Mechanical…
Update: Added even lower profile version Update 2: Added a version for 2 Power Strips with a stronger hook
With the new Raspberry Pi Zero W (Pi0W) having been released, I decided to design a case and camera mount for my 3D printers. And what a better day to release it than Pi Day 2017! This should work if you don't have the front acrylic panel…
Many cheap printers are using the Cheng Liang P360V24W power supply. The biggest flaw of that model is the loud fan inside the PSU. There are a few cover mods on Printables, but they all just work when the PSU facing out of the printer.…
It's a smaller and faster print than the original. I just performed a cut through one of the mounts
I designed this simple D6 (6-sided) dice holder to hold a standard set of 12x (16 in mm size) Chessex dice like those found here . Should work with most similar types of dice, as 16 mm is more or less the standard size for these types of…
An easy to print holder for most of the cheap 220V power strip . as they comes without fixing holes... Here my solution , and need only some 12 gramms of Material ! and 4 screws diam 3mm No support Infill: minimal 15% better 20% or 25%…
BOM: Amount Parts 12 M3x8 SHCS 8 M3 Heatset Insert 2 Din Rail Mounts (preffered Rama Heatset Mount) 2 Dual UHP Mounts I used it together with Ramas Din Mounts. https://github.com/Ramalama2/Voron-2-Mods/tree/main/DinClips If you use other…
I made this model to mount the powersupply for my lenovo dockingstation under my desk. quite a simple design, but i coulndt find it anywhere else, so i made my own :)
Replaces the original foam/plywood motor mount for any electric aeroplane that uses two pieces of 6mm depron foam crossing to form the motor mount bulkhead. Print in PETG for toughness and heat resistance, 0.2mm layers and 50% infill. No…
The part is copied by memory, as I lost the original part and have not been able to find detailed pictures or diagrams, and as I said before the part is imposible to find anywhere. I tried my best to make sure all dimensions are precise…
Sand the face on which the tesa powerstrip goes for better adhesion
This is a bracket adapter for mounting a Mornsun LMF200-23B24 power supply to the bottom of a Voron0.2 3d printer. V1 is adapted from the PSU_bracket_Voron0.2-4.6mm_heat_set_insert.stl model that jrdn8056 created. V2 was created from…
Other power strip brackets were not sturdy enough or did not fit my used powerstrip, so I made one myself. Its useable with the typical power strips available in Germany.
Use these Powerstrips: TESA 58000 tesa® Powerstrips® Large, 5,0 x 2,0 cm I use this hook in my bathroom for a towel, but you can use it for every purpose. Tested glued to tiles in my bathroom. Has lasted bath towels for a year
Bahtinov Masks ( https://en.wikipedia.org/wiki/Bahtinov_mask ) are focus aids for dialing in a telescope for astronomy/astrophotography. I whipped up this one for my Celestron PowerSeeker 114 Telescope. There's a pretty good chance it…
The lens cap Canon should have included in the package to protect the objective lens Print instructions Print in PETG at 0.20mm quality setting, with Archimedean chords as top and bottom fill patterns for better aesthetics.
ENGLISH Description Wall mount for WORX 20V PowerShare batteries. Designed to be mounted from the backside of any panel, ensuring only two holes are visible on the wall. No locking feature (for quick and easy battery removal) No visible…
PowerShark is an USB-C power supply for the Amiga 500, 600, and 1200. Unfortunately it is delivered in a “dust grey” case that does not really match to most Amigas. With this replica case, you can now print your own case in any color.…
Compatible with HP DPS-750RB A Server powersupply. It will probably work on most HP powersupplies that have built in fans. Useful for charging lipo batteries or anywhere you need up to 750 watts of 12v power! To assemble, short the first…
Use Case: I designed this powerstrip to distribute power from a lipo battery to four automotive lights via xt60 connectors. It is handy anywhere you need more than one xt60 power source. Design: The case is designed for the xt60 connector…
Wall mount bracket for EU powerstrip. Designed for powerstrips with dimensions shown in the attached image.
Please Fly under the supervision of a Certifying Rocketry Association such as TRA/NAR/CAR/UKRA This rocket is well equiped to serve as a L1 certification rocket within these organizations Powerslide is a 54mm rocket flying on 38mm Hobby…
Use tesa powerstrips small to stick it to he wall: https://www.tesa.com/en/consumer/tesa-powerstrips-small.html I printed it in PETG with supports and 0.2 mm layer height.
Powerslide NEXT parts Size M Fully tested on 42-43.
I adjusted the wall thickness from JBs model to 3 mm (that is strong enough), the height to 41 mm to fit my power strips and also optimized it for better 3D printing. If you want to remix the model, please take the original one from JB.
Nozzle: 0,4 Layer: 0,2 Infill: 15 to 25% should be sufficient No supports needed, if you print it on the side.
Check out my new Bed Levels ! This is a test print I made to help level my bed while it's printing. It is currently made to fit a 225mm x 145mm bed, which would cover the MakerBot Replicator Dual, FlashForge Creator Pro, PowerSpec Pro 3D,…
Fit snuggly into the standard mounting hardware. Tipp for Printing: - Print the vertical ones on their side, such that the cut hexagon lays flat on the printing bet - Print the horizontal one on its flat face - I used three layers on top,…
I've made the hole for the cable bigger and added one on the other side for the "Comfort Switch Plus" model
I wanted a no-drill mounting solution for the Honeycomb Storage Wall. I found a good design and remixed it for my purposes. It is now sized perfectly for the tesa Powerstrips LARGE. Additionally, I made several other changes: the base is…
A clamp for a towel so that it is possible so securly mount a towel on a wall even when the loop on a towel is missing, using the tesa Powestrip connector. How to Print Print the clamp using 3 Walls and 15% infill and 0,2mm layerheight…
This is a small shelf for you prints. It is desinged to be mounted by two Tesa Powerstrips ( https://www.tesa.com/en/consumer/tesa-powerstrips-large.html ). For one complete shelf, print 1x the shelf file and 2x the mount file. Category:…
3D Printed Mount for Brennenstuhl Power Strips : This mount is designed to securely attach Brennenstuhl power strips to flat surfaces, such as walls or desks. It's a practical solution to keep power strips organized and out of the way,…
Um den lauten Lüfter am Netzteil gegen zwei leise 60x10 Ventilatoren zu tauschen. Drucken in ABS oder PETG
Just a small shelf for your bathroom or kitchen to store some things right next to you. Can be mounted with double sided adhesives, e.g. Tesa powerstrips. The spot for the adhesives is 15x35mm and fits two Tesa powerstrips in size small.…
7.3 Powerstroke Oil Funnel System (OBS) This is a modular oil funnel system designed specifically for the 7.3L Powerstroke , with a focus on the taller oil fill neck used on OBS (1994.5–1997) trucks . More models for obs fords and…
Two brackets to mount a EU powerstrip (KF-FB-03K) to the underside of a table/desk with the help of a couple of screws. Since I had a hard time figuring out how big other brackets online are, here's some dimensions of my powerstrip for…
A simple case for LPV 60 24 Meanwell Powersupply for a standing installation to use the convection effect for cooling. Don't disturb the air flow of the slots in the case. It might be a good idea to print it in flame retardant PET. Check…
A simple camera ring that replaces the one that comes with the camera (original part name is RAK-DC2) Prints without support if model is flipped upside-down. My settings for Bambulab: Quality: Wall generator: Arachne Strength: Wall loops:…
Motor mount for use all in RC Powers park jets. https://rcpowers.com/community/
With this model and the voltage regulator module, you can use your Milwaukee battery as a power supply with adjustable voltage and current. Perfect for use on the go. Mit diesem Modell und dem Spannungsregler Modul kann man seinen…
adapted the size to fit a 43x50mm powerstrip
These RYOBI 18V battery mounts can be bolted down. You can make different configurations to suit your need. I've also provided a 12V socket and switch holder models. For an example, I put together a 2S2P system that has a regulated 13.8V…
On my Anker Make M5, I can print the box and four dividers (flat on the bed) in one go. No supports are needed.
Simple shroud for a meanwell lrs350 power supply, 100mm tall, 68mm extends below the power supply, 4.75mm (based on 5mm, additional tolerance brings it to 4.75) wall thickness (except for the flush side) Notes: Uses existing hardware from…
This Hook is for the compatible “tesa Powerstrips Large (2kg)”
Introduction This is a nosecone and internal ebay designed to pair with IPL's PowerSlide fincan. The ebay sled also originates from IPL , but has been heavily modified to fit in this nosecone, and should be able to accommodate most…
Eletrical powerstrip adjustable holder. Can be used under desk, or as wall mount. Either use double sided tape or screws. Minimum width is 52mm. Maximum is 95mm. 5 Main versions: 42mm height 42mm height with extra space 47mm height 47mm…
First Model i made for my Skadis. Simply 2 "Rings" which can hold the Powerstrip. Printed with Sunlu PLA+ at 15% Infill.
The Storage Box needs 2 Wallmounts. Hits Storage Box is designed for 2 "Tesa Powerstrips" large (2kg)
