Search results: pressfit

Sort order

Counting matching models…

P
PrintablesYell

Pressfit Pulley Remover

put a small drop of household oil on top of the shaft then slowly turn the screw make sure the screw is hitting the shaft and not the pulley. Requires one of the Enders long m5 and a nut. Print PLA, hot, with many walls and good 3d infill…

Downloads
700
Likes
97
Rating
4.93
P
Printablesdg fpv

tbs source one v5 pressfit arm protection

made to be pressfit screws are passthrough so tpu is not inbetween the screw and the arm.

Downloads
534
Likes
46
Rating
5
P
PrintablesKinematic Digit

Universal Spool Centerer Bearingless - now with pressfit magnets

NEW VERSION (Now with optional 6x3 press-fit magnets so it doesn't fall off the spooler when loading, and an extended version for spools that are a little wider) I redesigned this specifically for the dual filament holder that I made from…

Downloads
323
Likes
94
Rating
4.5
P
Printablestruschival

Pressfit Bottom Bracket BB86 Bearing Remover v2

Model inspired by metal tools. I was too cheap to buy a tool that I use only once every three years. The printed plastic version is not as durable. The first version broke while pushing out the second bearing but did the job. This version…

Downloads
243
Likes
33
Rating
5
P
PrintablesSurfalex2000

Prusa XL series: Pressfit Calibration Pin handle with grooves

Hey, today only a small upgrade. I didnt like the loose "handle" for the Calibration pin, so i designed one with better grip and pressfit. The new one has a nice pressfit, just enough to not get loose. Also i gave it groove for more…

Downloads
227
Likes
41
Rating
4.71
P
Printablesaqf23

SRAM DUB BB PF (bottom bracket pressfit) installation kit (NEW V2 handle!!)

This is an SRAM DUB bottom bracket installation kit. It's not necessary to buy a special and very expensive bearing installation tool to install the bottom bracket of your bike, I know that it looks better anodized in blue with a nice…

Downloads
215
Likes
40
Rating
5
P
PrintablesREDBEARD-PRINTS

6 String Humbucker Cover ( EMG Style ) Pressfit

I needed new Humbucker Cover cause mine Broke. these just slide over the Pickups and fit snuck tight. maybe u need to scale up or down for ur pickups. just measure it. i print in PLA - 0,2 nozzle. with textured plate for finish look. no…

Downloads
108
Likes
11
Rating
5
P
PrintablesChop3D

3018 Pro CNC Cable Chain Mount Nema 17 PressFit/Magnet

Cable Chain Nema 17 Mount for the 3018. Glue in the magnets and simply press onto the motor. You need 4 8x2.65 or thinner Neodyn Magnets

Downloads
105
Likes
9
Rating
0
P
Printablessadkovvsky

Pressfit PF30 Bottom Bracket press tool and bearing remover

Made specifically for the Raceface PF30 bottom bracket, but will certainly work with other PF30 BB's. Bearing removal still in progress! but you can use a disassembly cup to remove the bearings from the pulled out bottom bracket shells.…

Downloads
96
Likes
13
Rating
0
P
Printablesdg fpv

aos 5 pressfit arm protection skid

I dislike arm protections that fixate the protection with the motor screws so i designed my own one for the aos5v2 as pressfit, tight and easy to install :)…

Downloads
74
Likes
3
Rating
0
P
Printablesfrijoles

LTT Screwdriver Case Bit Holder (8x3mm magnet PressFIT)

This is a modification of the LTT Screwdriver Case Bit Holder (8x3mm magnet version) from https://www.printables.com/model/372998-ltt-screwdriver-case. I found that with my Voron 2.4 using a klicky probe (which has strong magnets for…

Downloads
74
Likes
13
Rating
5
P
PrintablesEA2W

SUNLU dryer pressfit PTFE guide reverse bowden with clip / collet

This is a pressfit PTFE guide for SUNLU filament dryer. It uses a clip / collet to fix the PTFE tube. No drilling and no glueing is needed. Can be used for reverse bowden setup all the way to the extruder so the filament stays enclosed…

Downloads
71
Likes
8
Rating
0
P
PrintablesChop3D

3018 Pro CNC Y Back Endstop PressFit + Magnet

Mount for the rear Y endstop of the 3018 CNC. Is PressFit but 4 8x2.65 neodyn magnets also hold it

Downloads
70
Likes
10
Rating
5
P
PrintablesStigern

Cottonswab/Q-Tip Tweezer (pressfit)

Tweezers for inserting q-tip/cotton swabs into. Cut off the ends and insert into the tweezer. We use these for cleaning fiberoptics, dipping them in alcohol then wiping clean the fiber.

Downloads
56
Likes
18
Rating
5
P
PrintablesSati

Herramienta para pressfit Shimano SM-BB71-41A

Herramienta para pressfit Shimano SM-BB71-41A. Se necesita una varilla de 8mm, tres tuercas y dos arandelas. Imprimir con 4 capas de perímetro y relleno 40%.

Downloads
51
Likes
10
Rating
0
P
PrintablesGero

Shimano Pressfit Bottom Bracket Gentle Removal Tool SM-BB71-41B (No hammer)

I designed this tool based on the measurements of a Shimano Pressfit SM-BB71-41B. It might also work for other models, but I recommend checking the dimensions and making adjustments if needed. You will need few hardware parts: 1x This…

Downloads
50
Likes
6
Rating
0
P
PrintablesBaklin

Sram GXP pressfit install tool

This is an old design that I imported from my prints on Thingiverse. This is a remix from the parts needed to install a bottom bracked from https://www.thingiverse.com/thing:2303747 I made this to install a Sram GXP pressfit bottom…

Downloads
49
Likes
3
Rating
0
P
Printablesmindfest

Dual Oral-B electric toothbrush holder with pressfit cable organizer

This is a model for organizing your electric toothbrush and cable. Or Sockets are over and aside the sink and the cables were rather hangin down and could get wet etc. I mounted it with double sided tape. You can cut the model in your…

Downloads
46
Likes
39
Rating
0
P
Printablesdemjansein

pressfit tool Shimano BB86 SM-BB72-41

pressfit tool für Shimano bottom-bracket Ultegra use a M8 rod with nuts and washers you have lying around PLA is enough

Downloads
40
Likes
15
Rating
0
P
PrintablesNottub

Wirestripper Pressfit

Assembly: Just put the Blade in from the side und close it with the plug. Alternatively you mount it with a M3 srew. Be sure to cut the insulation with a rotary movement. Then it can be effortlessly stripped. Printsettings: Material: PLA…

Downloads
37
Likes
7
Rating
0
P
PrintablesGman

30mm Fan to 40mm Pressfit adapter

A Simple fan adapter that allows 30mm fans to fit in cutouts intended for 40mm fans. Nothing special, just a very simple model. Dimension: Outside: 40x40x10mm Centered Cutout 30.1x30.1x10mm Warning: Screw holes not included.

Downloads
36
Likes
10
Rating
5
P
PrintablesDawid Wachowicz

rounded and drilled guitar 6mm pressfit knob

The file contains three models: one rounded knob modeled after those found on Ibanez-style guitars, and a second version of the same knob featuring a hollowed-out cavity designed to be filled with epoxy resin or covered by an included cap…

Downloads
35
Likes
5
Rating
0
P
PrintablesChemist

Pressfit Filament Holder

Eng: Hello everyone, this is my interpretation of a filament holder specifically designed for the 4-liter cereal boxes. The parts can be easily assembled without any tools (pressfit) and provide a stable solution for the storage and…

Downloads
31
Likes
2
Rating
0
P
PrintablesJann Wieland

Hygrometer Mount with pressfit PTFE mount

Since the original mount for the SunluS1 didn't have an option to mount PTFE tubes, like the eBox, I modified the Hygrometer Mountplate for the SunluS1 and added a simple press fit mount for 4mm bowdentubes. I also added the CAD files so…

Downloads
28
Likes
6
Rating
0
P
Printablesac&6!nabBv72vK

Pressfit Bottom Bracket BB86 Removal tool [FSA 19mm Shaft]

Inspired by : Pressfit Bottom Bracket BB86 Bearing Remover v2 (for 24mm cranks) Print Recommendations: (what worked for me) Special: add pause to insert m8 nut at the last layer before it is covered (was layer 103 for me) [see image]…

Downloads
28
Likes
5
Rating
0

16mm pressfit RCAR - Nerf rotation

Given the recent innovation of bearing SCARs, I decided to hop on the bandwagon. If I understand correctly, SCAR = String Centering And Rifling Bearings are pretty expensive though, so misusing rivets seemed like a reasonable solution for…

Downloads
24
Likes
9
Rating
0
P
PrintablesMagnus Friis

Lamp Socket Cover [Fastest+Pressfit]

A Quick Socket cover for those ugly sealing lamp outlets. No Supports Scalable Pressfit (Current model is for 70mm holes)

Downloads
23
Likes
5
Rating
4
P
Printablesxorath

Trek BB86/BB90 pressfit tool

Made in tinkercad to make a cheap pressfit tool for my Trek Emonda with BB90. Should work with BB86 as well as they have the same inner dimension (untested). Print 2x of each part, then just put them in each side of an M10 threaded rod,…

Downloads
22
Likes
13
Rating
0
P
PrintablesJeff Hudnut

pressfit BB tool for 3/8" rod

used this for a 30mm crank and it worked perfectly. will work with cinch or dub cranks.

Downloads
22
Likes
6
Rating
0
P
Printablesmoreco

BB86 bottom bracket pressfit tool

DIY press for installation of BB86 pressfit bottom brackets You'll need: 2 printed parts M8 threaded rod, 230mm long 3 M8 nuts 2 M8 washers The hole in the printed part is deliberately undersized so you can drill it out, ideally on a…

Downloads
18
Likes
5
Rating
0
P
Printablesnem

LumenPnP Discard Bin for in front of Camera - pressfit

Pressfit bin for the lumenpnp machine

Downloads
18
Likes
1
Rating
0
P
PrintablesSkrrt5825

Slim Raspberry Pi Zero W2 Case M2 Pressfit nuts

Slim Raspberry Pi Zero W2 Case with places for M2 nuts in the corners.

Downloads
17
Likes
3
Rating
0

Pressfit UBBI Universal Bidirectional Bowden Interconnection (no bowden hardware needed)

I wanted a good quick connect but was unable to find one, then i stumbled on the original model and that looked and worked great, only problem is i dont have any of the bowden connections that this model relies on. So i remixed the model…

Downloads
17
Likes
3
Rating
0
P
Printablessebidev

Simple PressFit Case with FreeCAD Project File

This model is a simple but well-designed press-fit box , consisting of: Press-fit box with snap lid in two depths: 100×100×100 mm and small 100×100×50 mm. Box inner size: 95 × 95 mm Lid lip (outer size): 94.8 mm → 0.2 mm clearance fit…

Downloads
15
Likes
2
Rating
0
P
PrintablesZajda

Bicycle frame PressFit BB tube holder

This is very simple plug to bicycle frame with Pressfit BB standard (PF86 in my case but it works with other PF) Hole in the center is for M8 threaded rod. Printed 2 pieces hold my BB tube precisely in position in my own version for…

Downloads
12
Likes
5
Rating
0
P
PrintablesSurfalex2000

Prusament Filament Divider pressfit

I noticed that that i often have more half empty spools than full laying around. Also i wanted to recicle some spools. No screws requiered if you print in one piece. If you plit it, you would need to glue or screw it with the provided m3…

Downloads
12
Likes
5
Rating
0
P
PrintablesClac

PressFittedBolt

I made this to press fit close the snowball press instead of the other thing, (This might need to be put in a wrench for press fitting) Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0,2…

Downloads
10
Likes
0
Rating
0
P
PrintablesSepKo

Pressfit gridfinity baseplate

I decided to remix the original model so i can create any shapes and any sized bases. As Zack's post for printing fits also this on most parts. no need for brims or supports. All storage boxes are compatible with all base plates. Most…

Downloads
9
Likes
0
Rating
0
P
PrintablesCoco

Ender 3 Pro Pressfit Filament Detector Attachment

A printable attachment for mounting a compatible filament detector on an Ender 3 Pro. It helps create a cleaner, more secure sensor installation while keeping the filament path accessible. Print guidance Use PETG, ABS, ASA, or another…

Downloads
1
Likes
0
Rating
0
P
Printables

Dual Oral-B electric toothbrush holder with pressfit cable organizer

This is a model for organizing your electric toothbrush and cable. Or Sockets are over and aside the sink and the cables were rather hangin down and could get wet etc. I mounted it with double sided tape. You can cut the model in your…

P
Printables

Holder for Magnet Tubes with pressfit magnets in base

This is a holder for Boudewijn Plomp's magnet tubes, based on MrKuenning's design. This holder does not have the Gridfinity base and has the addition of spaces for 8mmx3mm magnets to be pressfit into the base to retain the magnet tubes…

P
Printables

Minimal Magnet Housing (pressfit - no glue)

[EN] To be able to remove the small neodymium magnets from the fridge with bare hands I designed this small housing. Because of the conical design it is very easy to grab the magnets. The tight tolerance keeps the magnet in the housing…

P
Printables

Helinox Chair One Feet, pressfit

Helinox Chair One Feet Inner Diameter 14mm, Feet Diameter 30mm Material: PETG Walls: 4 perimeters Infill: 100% Pressfit feature I welcome all feedback! I'm eager to see your finished models. Happy printing!

P
Printables

623ZZ Bearing Pressfit tool for Prusa i3 MK3/S

Why replace the entire idler for about $6 USD when you can buy a pack of ten (10) new bearings for about $10 USD and replace the bearing in the idler for $1 USD each time. This is setup for a Prusa i3 MK3/S's smooth idlers on the X and Y…