918 models
What is this? A rugged and waterproof 3D-printable keyring case for AirTags. Required Components 3x M3x6mm screws 3x M3 nuts 1x Rubber O-Ring (36mm outer diameter, 34 diameter inner diameter, 1mm thickness) Editable .f3d file has been…
Print approx. €1.36–€1.66 excl. taxPreliminary estimate for one variant
Sizes (Diameter x Height): 42 x 35 mm 42 x 50 mm 42 x 65 mm O-rings: Printed O-ring with FLEX O-ring 34 x 2 mm Printing Parameters: Resolution: 0.2 mm (O-ring 0.1 mm) Perimeters: 4 Infill: 15 % Supports: no Seam Position: rear Tips and…
Print approx. €2.13–€2.61 excl. taxPreliminary estimate for one variant
Simple bread proofing basket. Can't buy them anywhere because everyone is an artisan baker now, so I designed this. About the right size for 750g of dough. Designed in Onshape, model is here:…
Print approx. €11.08–€13.54 excl. taxPreliminary estimate for PETGSource material: PET
Update April 9, 2025 : STEP files added. While creating another print (see below) I got an idea for an improved snap-fit peg, and created this print to try it out. This snap fit incorporates what I believe are some improvements to typical…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant
The Procrastinator 3000 is the simplest of mouse jiggler devices. Watch how it works: https://i.imgur.com/9lpT7iE.mp4 Features: Low cost and low energy consumption Usage is undetectable by any software Failproof design Very easy to print…
Print approx. €7.34–€8.98 excl. taxPreliminary estimate for one variant
snap together model with two pieces to fit a SGHLAGE interior door handle. Modeled in Onshape 3D modeler. Produced on a Prusa MK4 with Input Shaper 0.4 nozzle using Prusament PLA material.
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for one variant
I have a small kid who is finally capable of opening our doors. I looked online and these knob covers were way too expensive… so, into Fusion I went. These are simple (and very close in design to the commercially available units). An…
Print approx. €3.26–€3.98 excl. taxPreliminary estimate for PETGSource material: PET
Please support the original designer and check out their now updated (for MK4) original model that can be found here before considering this model as an alternative. Please excuse the current documentation on this project as I am still…
Print approx. €10.85–€13.26 excl. taxPreliminary estimate for one variant
Schuko childproof dust cover A childproof version of the Schuko dust cover. This cover can be completely retracted into the socket and can only be removed with a tool. Version 1: Dust Cover with a hole, so you need an “Key” to remove it…
Print approx. €0.57–€0.69 excl. taxPreliminary estimate for one variant
Showerproof Soap Case easy to use in the shower to protect the soaps of splash water print-in-place hinged lid, easy to print and no support materials removeable and smooth case bottom for easy cleaning and consume sticky leftovers angled…
Print approx. €6.82–€8.33 excl. taxPreliminary estimate for one variant
The classic italian knock box, re imagined for FDM printing and upgraded with features! Rod-less design for very easy and super sturdy print High rim prevents spill while knocking Wide socket for secure stand without tilting Removable TPU…
Print approx. €10.51–€12.84 excl. taxPreliminary estimate for PETGSource material: PET
Was looking for a rugged case that can be versatile depending on the situation I needed it for but I didn't want to print multiple styles of cases. Found a few that I liked but none of them were perfect for me. So I put what I needed into…
Print approx. €0.99–€1.21 excl. taxPreliminary estimate for one variant
This is a simple manipulative that shows how the Pythagorean Theorem can be proven using rearrangement. We start with a tray with a fixed internal area equal to (a+b) squared and four identical triangles with sides of length a, b and c.…
Print approx. €1.72–€2.11 excl. taxPreliminary estimate for one variant
The size of the box is 3*26*17. Three components, open the cover and put in silica gel desiccant.
Print approx. €1.30–€1.59 excl. taxPreliminary estimate for one variant
The Urban Proof crate I had bought before my 3D printer time. I had mounted it with hard rubber pieces as spacers on a Racktime Snapit adapter . I replaced the rupper pieces now with mount plates. With the two new mount plates, the crate…
Print approx. €2.85–€3.49 excl. taxPreliminary estimate for PETGSource material: PET
This is a waterproof housing for the forumslader (ahead version) , a device to charge your Phone with the hub dynamo of your bike in a very efficient way. It can be mounted under the top tube of your bike with zipties. There is also an…
Print approx. €4.06–€4.96 excl. taxPreliminary estimate for one variant
With the fold-down handle, it's easier to shop with the crate because you only need one hand to hold it. The model is stable. In my test, it easily held 18 kg (two six-packs of 1.5 l bottles of mineral water). To put the handle together…
Print approx. €7.37–€9.00 excl. taxPreliminary estimate for PETGSource material: PET
I've been muddling over a way to use thermochromic filament for something other than just adding “wow!" factor to a print. Filaments used: Overture Cement Gray PLA Atomic Filament Perfect Yellow PLA Capricorn Tri-Color Thermochromic Lava…
Print approx. €1.30–€1.59 excl. taxPreliminary estimate for one variant
This model demonstrates a proof 1^3 +2^3 + … +n^3 is the square of the sum 1+2+…+n = n(n+1)/2 for the case of n=4. Four copies of a tile representing 1^3+2^3+3^+4^3 form a square with side 4*5. I first found this idea in “Math Made…
Print approx. €1.84–€2.25 excl. taxPreliminary estimate for one variant
I don't know who originally uploaded the model, but I found the model below, and although beautiful, I had a few problems with it, most notably: The print-in-place margins are too large, so the chain becomes wobbly. The model is too small…
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for one variant
My Pi400 did survive coffee on+in keyboard in February: https://forums.raspberrypi.com/viewtopic.php?t=329833 This model is proof of concept for coffee proof layer on top that still allows typing, and “see through” the printing of…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for PETGSource material: PET
A simple funnel to make filling my Squirrel Buster Standard Squirrel-proof Bird Feeder a little easier!
Print approx. €4.23–€5.17 excl. taxPreliminary estimate for one variant
This STL file provides a replacement wall mount designed to match the original dimensions of the waterproof shower phone holder, model B09PRCJ1W8. Over time, the adhesive backing of the original mount may lose its grip, especially in…
Print approx. €1.40–€1.72 excl. taxPreliminary estimate for one variant
100x160mm sign, with a warning from The Mgt. Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames, which fit all of my signs . You may wish to observe…
Print approx. €1.51–€1.84 excl. taxPreliminary estimate for one variant
Stable and waterproof OpenSCAD case V7.4 by pbtec See here a wonderful comment from a user: “This is INSANE! You sir deserve deserve the biggest applaud out there. This is a box to rule them all! … I have to admit I first didn't…
***NEW NOTE: Hey everyone, please stop reporting to me that someone is selling prints of this design. See the licensing at the bottom – commercial use is freely allowed. The original was by Happy Moon, who licensed it like that (and I do…
This small capsule can be used as an EDC accessory case, providing a convenient way to store and carry matches, pills, batteries, or other small items. Included in the design is a looped top, allowing you to conveniently attach to a…
This is a waterproof squeeze fan. It doesn't need screws, doesn't need support, can be assembled very easily, durable, very cool, and not noisy. You only need a hammer! +Jul 06,2021 The turbine have been updated to have more power. +Jul…
This is a rugged box with hinges and latches. It can be made waterproof by printing a seal in flexible filament, such as TPU, or by cutting a large 2mm thick o-ring to the appropriate length. (There is also a version without the seal…
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker You will need six M3x30mm socket head fasteners for the main…
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker UPDATE 27th February 2022-…
New: The body kit is now compatible with all versions of the Prusa i3 from MK3 to MK4S! Let me introduce you to the Bulletproof Wide Body for the Prusa MK3 and MK4 series! A machine that runs and runs and runs gets a look that is equal to…
Please give a ❤ if you like it, it'll help others discover it! Thank you so much! Craft custom waterproof * junction boxes to your exact specifications with this versatile Fusion 360 parametric model . This new 3D model has the following…
I've created a new version of the 3D model with added features and enhanced security! Check it out! Craft custom waterproof * junction boxes to your exact specifications with this versatile Fusion 360 parametric model . Customize every…
This parametric box has been redesigned from the ground up to fix the long-standing issues users were having while taking into account a couple of personal goals for design considerations. Fully 3D-Printed, no hardware needed! Flush hinge…
The Vase was printed on a Geeetech A10M with the dual color extruder hence the color gradient. Here is an article if you want to learn more about waterproofing a print. After a bunch of trial and error the following settings worked for me…
This is a simple yet very useful planter pot saucer I designed for use with round planter pots. Initially designed to be less noticeable and prettier than the deep plastic saucers that I can find at the garden store. I have seen other pot…
Simple Jug Can Pot Kännchen whatever to precisely I designed these to mix up some epoxy for my knives and pour that precisely into the handle molds. But it works super good with water too! I have 2 Designs: One with a handle to hold it…
This is rev2 of previously uploaded inline connector. It is smaller and consists of only 2 parts. In order to achieve IP68 rating you should use M20glands with sealing. Usually it comes with flat ring seal. Recommended resolution 0.2mm No…
So easy that you can do it with one hand! Heyy you, are you tired of missing the filament hole on your CORE one? Well.. i know that i am, so i made this quick to print attachment that you can print under 6 minutes at 100% Or if you're a…
Help me create more FREE models! If you enjoy my creations, consider becoming a supporter of my Printables club or you can buy some of my products . Your support helps me cover the costs of materials, energy, and time, allowing me to keep…
Multiconfiguration WAGO Junction Box V2 – Waterproof and pole mountable This is the next-generation version of the original Multiconfiguration WAGO Junction Box – now upgraded with robust new features to meet real-world demands. CHECK ALL…
I don't really like the glare from the backlight on the camera of my Q1 pro. Therefore, such a light-proof visor was made. It doesn't stick out much, it's hard to touch, it doesn't obscure the image much -it works.
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker UPDATE January 1st 2024- Added 2 styles of internal trays.…
If the weather is rainy or wet, your matches may become wet - and it isn't very pleasant when trying to light up wet matches - so I designed this waterproof matchbox case. As was said before - it's fully printable without any other…
Largely inspired by Customizable Rugged Waterproof Box https://www.thingiverse.com/thing:3338826 I which to have a box that does not require any screw, and for the fun of design . This is to print in PETG or ABS with some high infill…
Waterproof ip67 ip65 Junction Electrical Panel Box by dury
The travel tube, fitted with a o-ring to keep keep the bad smells away from people and any water from entering the tube. Perfect for a hiking trip or going to the sea. O - ring dimensions: 18mm (inner diameter) 2mm height
A remix of the other AirTag case, but with 4 screws and modified height. It was 3.5mm before and I changed it to 3.9mm. I printed mine with support under the screw holes at 0.2mm layer height
---------- UPDATE AUGUST 2023 ---------- Added a printable O-Ring by @Das_Enzym_395842 Print it in a flexible filament like TPU. -------------------- Capsule for special cigarettes. Remix of "The Desperado | Waterproof Keyring Capsule"…
BOM PETG black filament for box FILAFLEX 60A for insulating gasket 8x screw M3 x 30mm Allen head
A Pill Pill capsule, or pill shaped screwable container. To be completely waterproof, an O-ring must be added. Inner diameter should be Ø14-Ø18.5mm. Thickness 2-3.5mm. There is also a version for use without O-ring. The watertightness…
The stick-on cabinet locks my in-laws got me started coming off after our 2nd little one, so I decided to see if I could design one to my liking. Designed to be easy to print and with a small flat bit on the end for alignment. I suggest…
Kindersicherung für Steckdosen. Die Sicherung sollte in alle EU Steckdosen passen
I've created this waterproof case for my sensor. It is o) easy to print (no support needed) o) easy to assemble - just 2 M2 Screws o) no specials needed - just a standard a rubber ring o) easy to mount (zip tie or double sided tape) The…
One word and one word only. BULLETPROOF! FEATURES Will 100% make your Dummy 13 seriously bulletproof. The armor has throat protection, deltoid (Shoulder/upper arm area) protection, side protection, lower back and side protection, abdomen…
This is an update of my original EDC capsule, after ditching the “EDC” part for being too pretentious. On the original, the clip was too small, and the flap was too weak. Fixed and fixed. In this little capsule, you can carry pills, a…
This rugged waterproof case is designed for the DJI Mini 3 and is also compatible with the DJI Mini 3 Pro. DJI Mini 4 Pro should also fit, but it hasn't been tested yet. Please let me know if you have posibility to test. The case is a bit…
Simple yet stylish Voronoi pattern anti echo soundproofing panels! 200x200, tileable, and come in two versions - with screw holes and without (for, you know, double sided tape) and being just around 150g per piece the double sided table…
Important note: Make sure that the top and bottom layer are set to 0. The trick is that the infill pattern is the grid which appears when no top and bottom layers are printed. I totally love the spillproof desiccant boxes for the AMS from…
I did not found a good morse code lookup table to be printed, so I made my own as a multi color print. Morse code is a method used in telecommunication to encode text characters as standardized sequences of two different signal durations,…
This remix allows for inset nuts so that no pliers are needed. A printable gasket is included if the case is not being used for a waterproof use case. If you are using the case for a waterproof application, you should definitely purchase…
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker UPDATE December 31st 2023- Added an optional slightly…
Simple but effective smell proof container in 3 sizes, see cutaway image for how it works threads are designed to not need support so NO SUPPORT
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker Modular tray and dividers for the ever popular Water…
Key Features: Field-Proof Design: Perfect for stationary use or transport, these robust boxes are engineered to withstand the rigors of both your workspace and the field. Stackable and Space-Saving: The innovative stackable approach…
Childproof your home! Keep your family safe from sharp corners with these easy-to-install corner guards. Simply peel and stick to any exposed corner, and they'll provide a cushioned barrier that helps to protect little ones from…
Create long-lasting flames with this waterproof firestarter! Flames last 10+ minutes, even in the rain! No plastic is burned for this model - instead, the mold is used to create a waterproof wax and dryer-lint (or sawdust, paper, etc)…
I built the Mini Warehouse for use with the remote controlled Mini-Skidi RC model that I remixed here: https://www.printables.com/model/567657-the-mini-skidi-rubber-remix. It became a play environment for young drivers. The warehouse was…
We have needed some waterproof boxes to install some cables in it. as the shipping time was too long I've decided to print them with 3D printer. First 2 boxes were printed with PLA, should be waterproof. Another attempt will be made with…
Non Watertight version: https://www.printables.com/model/1022611-mini-pill-travel-case-container-for-backpack-or-ke
Simple ashtray which is useful outdoors. If you planning to use it with your hot cigarettes, it will be good idea to cover the tray with something more strong against high tempertature. Like Alu Foil, for ex. Print Settings Printer Brand:…
Non Watertight version: https://www.printables.com/model/1024677-mini-travel-case-backpack-key-hanger
OK, I had to look up EDC – it stands for Every Day Carry. Things that are part of your personal daily kit. In this little capsule, you could carry pills, a band-aid, matches, emergency money, or a few precious sheets of toilet paper. It…
waterproof keychain container / Portable ashtray No need for supports (The lid should be turned to print without supports) The TPU rubber band can be replaced with an O ring of 20 * 2mm
Hi, Today I introduce you inline network waterproof connector which utilize standard keystone adapter. Items needed: 1x connector middle 2x connector cap 2xM20 gland 2x 1,5mm O-ring gasket (optional) 1x Keystone connector Assembly process…
A jam proof pulley for antenna or other projects. The hing mount and the pulley mount have a matching diamond interlock that allows the pulley to be mounted in one of two orientations, depending on your needs. There are also mast top…
Canon Lens Hood designed for a cheap Replacement for ET-74B REPLACEMENT FOR : ET-75B https://www.amazon.com/-/en/LH-74B/dp/B06XSJ3FT4 PROOFED TO BE COMPATIBLE WITH: RF 100-400mm F5.6-8 is USM…
A 3 part model that, combined with some M20x1.5 Cable Glands and a snip of 1.75mm TPU filament, you can splice a 3 wire connection together and keep it dry. I recommend printing the inner piece with an exterior brim and the caps with an…
:edit 23.04.2024 added version for mounting on a wooden board. Use 3mm wood screws.
⇩⇩⇩⇩⇩⇩⇩⇩⇩⇩⇩⇩⇩⇩⇩⇩⇩⇩⇩⇩⇩⇩ Maybe this is more interesting for you - it's a prototype of a mechanical calculator based on this design: https://www.prusaprinters.org/prints/86506-mechanical-calculator-working-prototype (it jams less and is not…
The CAD is parameterizable but you may need to merge extra latches or adjust the extrusions if you do decide to modify things. I've found that adjusting the parameters for size you have to go into the latch sketch to adjust the height…
Improved version of my Modern Coffee Knock Box V2. Version 1 is still useful in case you look for a quicker print with less material use. Version 2 published here is sturdier and more silent due to larger damper pads. Version 3 is…
This is a remix to attach a neck strap to the Dji RC-N1/N2/N3 controllers both for safety, to prevent drops, and stability to make flying a bit easier if you're used to hanging your rc controllers off your neck. Changes from original: I…
This is a ruggedized, waterproof enclosure for RAK19007/4630 Meshtastic devices. It features an external helical GPS antenna for improved reception under thick canopy conditions as well as a Fischer 102 waterproof connector for charging/…
Model I designed this case to carry both the Miniware TS100 and its accessories, including the battery. The box is divided into 2 levels, the lower one can accommodate ESD tweezers, a solder holder , the 50cm cable and space for adapters…
My modified version of pb-tec's design https://www.printables.com/it/model/72839-stable-and-waterproof-electronic-box-enclosure This are the changes: added parameters NutBridgeType and NutBridgeLayerHeight to simplify printing screw holes…
3D model description I’ve created two separate waterproof cases one for the ESP32 WLAN module and another for the WT32-ETH01 module in combination with the PN532 NFC module to protect your electronics in outdoor or damp environments. Both…
This is my latest attempt to get the HC-SR04 to measure reliably the water level in a tank. Previous attempts with the waterproof JSN-SR4T ended in erratic results due to multiple reflections from the tank walls especially at low water…
XDA Keycaps for Dust-Proof Stems (Remix) This is a 3D printable keycap set in the XDA profile, specifically designed for keyboards with dust-proof stems. Key Features: Compatible with dust-proof stems Based on the XDA profile for uniform…
Features Waterproof Variable size of the rear box Five quick-release mount points on the body of the box, another on the rear box (if it is deeper than 80mm) suitable for example for mounting on a camera tripod - the screw is part of the…
Unable to find a drawer lock to my liking, i designed my own. To me, baby proofing drawer locks should be: practical to use simple and cheap I'm very happy with the result. The draw back to this design is it can not be used if drawers are…
These parts were inspired from a design by KeeganBuilds (YouTube). I modeled these parts in OpenSCAD to fit the components from a 2 kW diesel heater kit and have included the .SCAD files below so others can modify to fit heaters with…
Just a simple DS18B20 Temperature Sensor mount. I printed it with PLA but if you need it in a place that gets hot you better use something that can withstand the temperature. Slide the sensor in from the top or the bottom. It has a tight…
One of our cats insists on destroying the paper towels kept on the kitchen counter (a wall-mounted solution was not possible as the counter in question is part of the kitchen island). Holder is composed of 3 parts: Base, Shell, and Top.…
I designed a waterproof cable gland for strain relief as the only ones I could find weren't water tight. The design is based on commercially available glands but is modified to be more printable and customizable. You will need TPU for the…
18650 waterproof case, two options: 6X battery, the standard version 5X battery, a compact version Both of the models have been equipped by a small slot to house a gasket, to ensure a very strong protection to the liquids intrusion in the…
Junction Box with cover for 2 Core cable (Sheath Thickness 3 mm, strand 0,75 mm) and watterproof cable termination (hole/diameter 4 mm). For Watterproof I used silicone glue (excatly Mamut glue) into Junction Box. Male Female Plug 2 Pin…
My kids managed to break 3 of the original propellers, so I made one that's more robust! This is a direct replacement for the original propeller, stl and stp files included.
![[revised] Schuko childproof dust cover](https://media.printables.com/media/prints/213045/images/1951793_70ec6ffd-4c95-4571-aec5-58b493c370ae/schuko-childproof-dust-cover-v2.png)
![ESP32 + PN532 NFC Module Case [Waterproof]](https://media.printables.com/media/prints/1069827/images/8093768_c0631fd9-f6cf-4489-a895-df58f6477074_8d74c501-1612-4c6c-a51e-08b0623ff4a2/screenshot-2024-08-31-202814.png)
