Search results: ptfe

Sort order

3,446 models

P
PrintablesRepkord

6mm PTFE Tube Mod for Prusa XL

Minimize friction to ease feeding and stress on the nextruder by upping PTFE from 4mm OD to 6mm OD. Since I like to use my XL with RepBoxTT underneath to feed spools having less friction on the longer runs is critical and thats why I did…

Downloads
144
Likes
72
Rating
4.67
P

MK3S+ and MK3S FS Cover with 4mm Tube (PTFE)

The hole is 42mm in diameter and 10mm long, so it shouldn't be to tight.

Downloads
13
Likes
0
Rating
0
P
PrintablesOurAngryBadger

Bambu X1 PTFE Extruder Bracket AMS Error Fix

Do you have the following printer errors when printing with the AMS? Failed to pull out the filament from the extruder Failed to feed the filament into the toolhead Well, give this little mod a try! In my case, I found the most common…

Downloads
24,045
Likes
2,872
Rating
4.73
P
PrintablesSTprinting

Bambu Lab AMS Hub PTFE button

Simple button to make removing the PTFE tube from the AMS buffer a little easier. There are 2 versions. One is a permanent install, and the other slips over the tube so it can be removed.

Downloads
18,855
Likes
1,370
Rating
4.87
P
PrintablesGalvanic

Voron Bowden ptfe tube guide arm and canbus cable support

V2- PTFE bowden tube guide and CANBUS wire support **** 7NOV24 -Removed a zip tie hole on the long arm's that was a weak point **** I've made some adjustment after some feedback from the community. Changes made over V1: Added a option to…

Downloads
13,559
Likes
683
Rating
4.91
P
Printablesraeuberhose

Bambu Lab PTFE Guide

Update 03.01.2022: version v3 is available. The bend radius has been changed to roughly 40mm to address the binding issue, which could create problems when loading stiff/rough filaments. Update 29.12.2022: added new version…

Downloads
9,858
Likes
1,325
Rating
4.78
P
PrintablesAdam L

X1 / P1P PTFE Tube Guide to fix loading issues - best of both worlds

Update (5/3/23): I would now recommend that people consider trying the ShortStack Remix linked in the 4/17/23 update directly below if it meets your needs. Its been used for a few weeks with decent success, and seems mostly equivalent to…

Downloads
8,235
Likes
1,335
Rating
4.94
P
PrintablesLine Arc Line

Join PTFE Tubes Together Magnetically!

This coupler allows you to join two ends of PTFE tubing together with magnets! This will be useful if you want to have an airtight connection between two PTFE tubes but still want to be able to pull/push the filament inside sometimes. I'm…

Downloads
7,522
Likes
4,595
Rating
4.96
P
PrintablesLMaker

Creality K1 - PTFE Guide

PTFE Guide for K1 extruder No supports needed. Improves filament guidance to the extruder Other mods for Creality K1 You can buy me a coffee with a donation. Me puedes invitar a un café haciendo una donación Click to danate

Downloads
7,283
Likes
728
Rating
4.98
P
PrintablesCcraft3d

Elegoo Centaur Carbon PTFE tube guide

On the new ELEGOO Centauri Carbon's the PTFE tube running into the print head is way too kinked and causes loading and printing issues. If you have one of these machines please snip the small zip tie at the end of the tube guide and…

Downloads
5,866
Likes
693
Rating
4.53
P
Printableshumebeam

Hydra - Enhanced Bambu Lab AMS - PTFE Load Buttons

Notice! This is only compatible with the original AMS. Please view my other designs for designs supporting other AMS systems, there are plenty. Notice, this design is for the older style of AMS feeding funnel that has a slim press button.…

Downloads
5,472
Likes
757
Rating
4.75
P
PrintablesLysander

PTFE Tool 4mm External Dia

6 minute print. quick and useful little tool for removing the 4mm ext dia PTFE tubing from my FlashForge AD5X printer. Tested it and its works great for me!

Downloads
5,362
Likes
204
Rating
4.92
P
Printablesbrucemoore

Creality K1/K1 Max PTFE tube guide

This guide holds the filament tube vertical as it enters the top of the extruder. It is a remix of a design by Way2Do. I strongly suggest adding a riser to your printer to provide extra clearance above the extruder. I had to replace the…

Downloads
5,017
Likes
435
Rating
4.95
P
Printablesmowcius

Bambu Lab X1 PTFE Minimum Radius Guide

11/11/22 - this model has been updated to a V2, as the V1 version was found in some instances to be making the problem it was designed to solve worse rather than better. V2 has a greater radius for the filament, less of a downwards angle…

Downloads
4,664
Likes
703
Rating
4.74
P
PrintablesCcraft3d

V2 NEW - ELEGOO CENTAURI CARBON Sliding riser With PTFE tube relocation

NO MORE kinked tubes, broken filament or issues loading or unloading. This is a NEW version of my other riser that now has an incorporated slot to relocate the PTFE tube through the riser! Also has a larger relief on the back corner to…

Downloads
4,355
Likes
514
Rating
4.53
P
PrintablesDET-Man

PTFE Tube Cap with Filament Label

This is one component of Yet Another Drybox . If you are planning to build your own box, have a look! You might find other components useful for your build, or maybe you even end up building the complete box 🙂. When building my filament…

Downloads
3,997
Likes
134
Rating
5
P
PrintablesLMaker

Anycubic Kobra S1 - PTFE Guide and Protection

PTFE Guide for Anybucic Kobra S1 extruder No supports are needed. Improves the orientation of the filament for extruder and protects the ptfe from friction with the housing You can buy me a coffee with a donation. Me puedes invitar a un…

Downloads
3,917
Likes
420
Rating
4.85
P
Printablesfirstgizmo

PTFE bowden tube connector

This connector needs no extra hardware parts and is used to connect your bowden tubes together. Due to its mechanism, one is able to connect/disconnect the tube by simply twisting the screw cap a little. If you have to modify it to your…

Downloads
3,739
Likes
443
Rating
4.91

[Option 1 of 3] Flashforge Adventurer (AD5M) Runout Sensor - Bowden PTFE Coupler C-Clip

This is one of three options I've made available for Bowden PTFE Coupler C-Clip for the Adventurer (AD5M) Runout Sensor. OPTION 1 of 3 — Clone of the stock factory clip PLA. Print as oriented. I used 0.2 mm layer height on 0.4 mm nozzle.…

Downloads
3,706
Likes
520
Rating
4.89
P
PrintablesArea51

PTFE Tube Chamfer and Cut Jig

Simple jig for PTFE tube cutting (4mm OD), having: 60° (30), 90° (45) and 120° (60) degree chamfer tool (works like pencil sharpener) Length of 13, 15, 19, 35.3, 38.8, 42.3, 43.4, 44.2, 50 and 66mm cutting tool Needed tools: Sharp blade…

Downloads
3,668
Likes
523
Rating
4.84
P
PrintablesMarko Borsic

PTFE Bowden Tubing Adapter for Elegoo Centauri Carbon Filament Sensor

simply clips on, no modifications or tools required perfect fit PTFE tubing is a friction fit, no extra parts required contains variants for 6mm and 4mm OD tubing can be attached and removed without unloading filament .step files included…

Downloads
3,659
Likes
543
Rating
4.8
P
PrintablesVertigoMakes

Prusa MMU2 PTFE Holder M10 Passthrough Adapter

Replaces the PTFE holder (screw on compression thingy), with M10 couplers. You will need PC4-M10 passthrough fittings like these. https://www.amazon.com/gp/product/B01IB81IHG/ref=oh\_aui\_detailpage\_o00\_s00?ie=UTF8&psc=1&tag=tv-auto-20…

Downloads
3,583
Likes
585
Rating
4.98
P
PrintablesAneoPsy

PTFE Tube Remover

PTFE Tube Remover Introducing our small PTFE Tube Remover. Engineered for effortless use, this compact device ensures a easy way to remove your PTFE tubes with its user-friendly design. *Print settings: 0.1mm layer height BENEFITS: Fast…

Downloads
3,341
Likes
372
Rating
4.95
P
Printablesschiko

PTFE / Cable Clip for Bambu Lab A1 (mini) without AMS lite

I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … If you want to use your A1 (mini) without AMS lite the cable…

Downloads
3,251
Likes
431
Rating
4.94
P
Printablesprofallout

Bambu Lab Filament Buffer PTFE Tube Removal Tool V2

This tool is used to remove the PTFE tube from both ends of the Bambu Lab filament buffer or AMS hub. *Edit - I added a hole for a magnet to hang it on the back for storage. Thanks to djwhouse for the idea. There are options for circular…

Downloads
3,229
Likes
161
Rating
5
P
Printablesthrutheframe

Bambu Lab P1P ptfe tube bracket

This is a 20° bracket that guides the ptfe tube of the P1P to run the same as X1/C. This can be used standalone and as part of the Arc for the P1P. The holes for M3 are meant to be self-threaded so I do not need to use an insert. The hole…

Downloads
3,155
Likes
428
Rating
4.76
P
PrintablesMol

Bambu Lab PTFE Bracket

This is an experimental bracket supplied by Bambu Lab for testing. It helped me, but your mileage may wary. The bend of the tube is extremely sensitive and may prove too much resistance for it to load or retract properly. Do note that the…

Downloads
3,023
Likes
340
Rating
3.83
P
PrintablesSamotrel

PTFE tube clip

Material: PETG Layer height: 0.2 mm Nozzle diameter: 0.4 mm READ!! Few people said the clip was too loose, maybe because your printer has better tolerances. I made change to the model so the opening is smaller and the grip is better tha…

Downloads
2,986
Likes
360
Rating
4.69
P
PrintablesLaisch

PTFE Bowden Y Splitter (3 way)

I needed a three way connector for my X1C when using the AMS, an external spoolholder and a Filament drybox. This is the design I came up with. For external parts you need 4x PC4m10 bowden tube connector. Make sure you have the connectors…

Downloads
2,743
Likes
585
Rating
4.84
P
PrintablesMy 3D Prints

4 in 1 Tool - Filament & PTFE Cutter + Filament welding

This is another 4-in-1 tool for 3D printing in the style of my model https://www.printables.com/model/191102-spatula-3in1. With this model you can cut 1.75mm filament at 45° and 90°. You can also cut the PTFE tube at 90°, and you can even…

Downloads
2,688
Likes
860
Rating
4.8
P
PrintablesEmbrace Making

Creality Ender 3 V3 KE/SE Overhead PTFE Tube Guide

See video above for installation on the Ender 3 V3 KE, the same method can be used to install on the Ender 3 V3 SE. Replace your top mount spool holder with this PTFE tube guide to remove the heavy spool from the top of your frame which…

Downloads
2,661
Likes
278
Rating
4.6
P

PTFE adapter for Snapmaker U1

CZ: PTFE adaptér pro podavač tiskárny Snapmaker U1 - Bez demontáže originálního krytu podavače - Tisk bez podpor - Tisk bez závitu pro PTFE konektor - Výška vrstvy 0.16mm - Tryska 0.4mm - Čísla vstupů v modelu - Materiál PLA Doporučuji…

Downloads
2,577
Likes
338
Rating
4.93
P
PrintablesPILED

Bambu Labs AMS PTFE tube and cable release tool

This model combines the functionality of both an AMS PTFE tube and cable release tool into one simple small part. Can be stored hanging behind the end of the cable (see photo) ≤0.2mm layer height. 6m45s print time Also available on…

Downloads
2,535
Likes
145
Rating
5
P
Printableshumebeam

Hydra - Enhanced Bambu Lab AMS - PTFE Load Buttons (For New version of the AMS Funnel)

Notice! This is only compatible with original AMS. Please view my other designs for designs supporting other AMS systems, there are plenty. Notice, this design is for the newer style of AMS feeding funnel that has a thicker press button.…

Downloads
2,493
Likes
273
Rating
4.89
P
PrintablesTwotone74

Bambulabs X1C PTFE-Bracket - Extended Version

I liked the original bracket, but it didn't solve the problem that the PTFE-Tube rises upwards and collides with the glasstop (ok, not so easy as before) or the LED-Frame that I installed…

Downloads
2,491
Likes
295
Rating
4.34
P
PrintablesWay2Do

Guide PTFE tube Creality k1

Update 16.10.2023 a new version with the direct guide is included to make the job of change filament easy. Update- 05.12.2023, i just add a rotative tool for the PTFE guide and two exit for the filament one on the top and one on the side,…

Downloads
2,403
Likes
253
Rating
4.78
P
Printablesjurassic73

Magnetic Twist Lock PTFE Connector

Design This is a lightweight(under 14 grams) twist lock PTFE disconnect which uses (2) 6mmx3mm rare earth magnets(see below regarding actual thickness) to hold a locking position and (2) PC4M10 or (2) PC4M6 pneumatic connectors. I kept…

Downloads
2,285
Likes
1,327
Rating
4.82

Sunlu FilaDryer S1 filament dryer box PTFE fitting mounts (M10/M6)

Quick mount that fits various PTFE fittings I found in junk drawers. Use short PTFE cutoffs, or full reverse-bowden with a longer tube. Prevents filament from scraping against the box during printing. Go full reverse-bowden (PTFE tube all…

Downloads
2,271
Likes
332
Rating
4.94
P
Printablesandrew brady

PTFE passthrough P1P

Allows PTFE tube to run through printer frame for use of lid

Downloads
2,269
Likes
260
Rating
4.79
P
PrintablesOurAngryBadger

The SENATE - amS feedEr buttoN And proTEctor for Bambu AMS System - PTFE Load Buttons

The SENATE - amS feedEr buttoN And proTEctor for Bambu AMS System Look at me mom, I used another stupid acronym. I was not happy with all the AMS Feeder Protector Button things out there, they all had flaws and strengths, including my own…

Downloads
2,269
Likes
361
Rating
4.89
P
Printablesstarfalk

X1 / P1P PTFE Tube Guide REMIX

17.12.2023: I advice to not use additional tube clips because they restrict the movement of the PTFE tube too much, what can lead to colission. 14.10.2023 ADDED V2 I modified the support structure to add a bit more clearance to the wire…

Downloads
2,265
Likes
173
Rating
4.78
P
PrintablesAneoPsy

Toolhead PTFE Guide V4 - X/P Series

ToolHead PTFE Guide V4 The Toolhead PTFE guide V4 rotate effectively to follow the movement of the toolhead and provide a smooth curve to the PTFE tube, reducing friction with the filament. /!\ Don't use PLA, use PETG or a plastic that…

Downloads
2,102
Likes
341
Rating
4.73
P
PrintablesSuperSport1966

Elegoo Centauri Carbon PTFE Tube Gasket

This is a gasket for the back of the Centauri Carbon where the PTFE Tube enters the back of the case. Hopefully this will prevent premature wear of the PTFE Tube.

Downloads
2,081
Likes
336
Rating
4.92
P
PrintablesZcubed

PC4-M10 PTFE Coupler

This is a very simple coupler for joining 4mm ptfe tubes using PC4-M10 pneumatic couplers. I use these to quick connect tubes from my repbox straight to my printer or MMU2S. Category: 3D Printer Accessories

Downloads
1,964
Likes
247
Rating
4.96
P
PrintablesKai

PTFE Verbinder / PTFE Connector

Dies ist ein einfacher Verbinder für 4mm PTFE Schlauch. Ich nutze den im Zusammenhang mit der MMU2s. Edit: Aufgrund der Antworten noch ein Hinweis. Der Verbinder ist nicht dazu gedacht die PTFE Schläuche stark zu klemmen. Das würde den…

Downloads
1,958
Likes
203
Rating
4.68
P
Printablesk2thestank

Bambu AMS Feeder PTFE Adapter v1.0 - The Original :)

Printed to snap on top of the AMS grey feeding ports to help slow down or stop excessive wearing by utilizing a PFTE insert to buffer it in Print on the top edge and snap it into place, will use approx 7mm of PFTE tube inserted inside…

Downloads
1,947
Likes
450
Rating
4.9
P
PrintablesAneoPsy

AMS PTFE Guide V2

AMS PTFE Guide V2 Introducing the AMS PTFE Guide V2 , a purpose-built solution crafted to facilitate the seamless feeding of your AMS . This guide ensures precise filament alignment, with the ability to rotate consistently for optimal…

Downloads
1,921
Likes
304
Rating
3.65
P
PrintablesRoboMagus

Knurled PC4-M6 PTFE Drybox Feeder

This is a simple solution for a drybox filament feeder using the PC4-M6 bowden tube coupler. For assembly only a single 8mm hole is needed in your drybox for the filament feeder to pass through. Assembly of these parts does not requires…

Downloads
1,846
Likes
320
Rating
4.94
P
PrintablesLittle Apollo

Qidi Q2/Qidi Plus 4 PTFE Guide Clip

This is a simple but functional dual purpose clip designed for the PTFE tube/push fitting on the Qidi Q2 toolhead. The clip acts both as a locking clip to prevent the PTFE tube from being removed and it also straightens the PTFE tube to…

Downloads
1,842
Likes
216
Rating
4.9
P
PrintablesFurdTerguson

SUNLU S1 Filament Dryer M10 PTFE Guide

Mashup of Jevermeister's https://www.prusaprinters.org/prints/116779 and EveningNewbs' https://www.thingiverse.com/thing:4855279 PTFE Guides for the SUNLU FilaDrayer S1 filament dryer. I wanted a PC4-M10 fitting, and Jevermeister's…

Downloads
1,818
Likes
242
Rating
4.94

PC4-M6x1.0 PTFE Tube Connector

I designed this M6x1.0 PTFE Tube Connector for a ø4mm PTFE tube to be able to fit the @suit1337 *Filament Guide Arm M6x1.0-version because the ones I found the hex was to big and obstructed/preventing the connectors to reach the threads…

Downloads
1,810
Likes
787
Rating
5
P
Printablesfatmax

Ender 3 v3 KE Filament Sensor Mount with PTFE Guide

Filament sensor mounting kit with PTFE tube to move a spool to the side of your printer. The assembly uses stock screws. But if you're using this frame brace (very cool by the way), you'll need two longer screws than stock. I used…

Downloads
1,783
Likes
192
Rating
4.67
P

Snapmaker U1 – PTFE Tube Radius Guide (Dryer to Feeder)

CZ: Tento držák PTFE trubičky jsem navrhl jako řešení pro bezpečné vedení filamentu ze sušičky do podavače Snapmaker U1. Umožňuje vést PTFE trubičku v kontrolovaném radiusu, takže se neláme, nekrčí a nezpůsobuje zvýšený odpor při podávání…

Downloads
1,729
Likes
258
Rating
5
P
PrintablesLayer By Layer

PTFE Cutter

If you'd like to support me you can post a make, comment and/or pay me a coffee at PayPal , @paulorfo (Venmo), $paulorfo (Cash App) -------------------------------------------- @Syndaver did a great job creating this simple and elegant…

Downloads
1,729
Likes
251
Rating
4.86
P
Printables3DRA

Creality K1 / K1 MAX PTFE tube holder

Unfortunately, the original clips catch on other elements during operation. I tried many other designs, but something was always wrong. The hole for the tube or chain clip is too tight. I designed my own version and after quite a long…

Downloads
1,706
Likes
144
Rating
4.5

Creality K1 Reverse Bowden PTFE Tube Clips

Wanted to free the reverse Bowden PTFE tube on my Creality K1 printer.

Downloads
1,663
Likes
145
Rating
5
P
PrintablesOurAngryBadger

Bambu X1 PTFE Straightener Bracket AMS Error Fix

NOTE: This design has been superseded by my latest remix: https://www.printables.com/model/338073-bambu-x1-ptfe-extruder-bracket-ams-error-fix I believe the one above to work better! But if the one above doesn't work for YOU, it may be…

Downloads
1,649
Likes
181
Rating
4.67
P
PrintablesLachlan A

PTFE Tubing Connector

A connector to add inline for your filament supply system. Good way to quickly and easily disconnect the tubing to clear a blockage or to switch between filaments in a dry box. Just twist to connect and disconnect. Simple to print with no…

Downloads
1,638
Likes
190
Rating
4.72
P
Printables3DJourney

Ender 3 S1 Filament Swivel guide (supports Capricorn/PTFE tube 4mm OD)

Don't forget to hit the like button if this helps you :) A filament guide for the Ender 3 S1 gantry top rail, remixed to enlarge the hole through the eye of the swivel to be larger so its supports some PTFE tubing. OD 4mm is a nice snug…

Downloads
1,543
Likes
285
Rating
4.81
P
PrintablesRenba

8mm Lead Screw Grease Applicator – Super Lube 21030 (85g/3oz PTFE Grease)

8mm Lead Screw Grease Applicator for Super Lube 21030 A practical grease applicator for lubricating 8mm lead screws directly from a Super Lube 21030 tube (85g / 3oz PTFE grease) . The adapter screws onto the grease tube and allows you to…

Downloads
1,536
Likes
466
Rating
5
P
PrintablesExerqtor

Voron Trident PTFE Guides

Trident PTFE Guides Printing: Default voron settings, correct orientation, no supports needed! Bom: Only printed parts. Description: Made to guide the PTFE tube uniformly into the extruder, and avoid rubbing against the top panel. One 90°…

Downloads
1,524
Likes
250
Rating
5
P
PrintablesLysander

(IMPROVED) PTFE Tool 4mm External Dia

An improvement on my original design, a 9 minute print. quick and useful little tool for removing the 4mm ext dia PTFE tubing from my FlashForge AD5X printer. Tested it and its works great for me!6 minute print. quick and useful little…

Downloads
1,504
Likes
84
Rating
4.89
P
PrintablesSilencedFrost

UBBI - Universal Bidirectional Bowden Interconnect - an overengineered PTFE tube quick connect

Want a quick, firm, durable connection for your PTFE lines? For quick diagnostic, quick swapping , without afflicting much damage on the PTFE itself? Want a universal connection that can act as an extender, terminal at the same time? Want…

Downloads
1,504
Likes
265
Rating
5

Sunlu S2 PTFE Connector

This can fit on the front or back filament output. Sized to fit PC4-M10 fitting. The hole in the dryer lid needs to relieved slightly for the PTFE tubing to fit without interference. I printed this in PLA and attached it to my Sunlu S2…

Downloads
1,494
Likes
223
Rating
4.93
P
PrintablesRuedli

Pivoting Panel Pass-throughs for 4mm PTFE tube

edit 28-07-26 - added a variant with 4 tight holes. See under Pivots for PTFE tube with tight fitting, "Quad Pivot 4.2mm round.stl" edit 15-10-22 - added two flat variants, as well as a M6 M10 variant This pivoting pass-through allows to…

Downloads
1,493
Likes
173
Rating
5
P
PrintablesGremei

PTFE Guide Extruder Bambu X1 Carbon no collision

.Thank you Adam for the Model! I have modified it to bring the support to a position which dosent get in collision with the front bezel. Further the attachment diameter was for my new Bambu X1 Carbon (03/2023) too small and increased the…

Downloads
1,471
Likes
199
Rating
4.73
P
PrintablesDaru FPV

Bambu Lab AMS Hub PTFE Tube Holder

I hope this will fix the unloading issues. Use the filament holder screws. €: No problems with unloading anymore.

Downloads
1,455
Likes
267
Rating
4.94
P
PrintablesSrossy

AnyCubic Kobra S1 PTFE Guide and Protection

I remixed this Anycubic Kobra S1 PTFE Guide using Tinkercad. I removed the top side of the PTFE Guide, so I could install it, without having to remove the Bowden Tube that leads to the extruder, which is almost impossible for me to…

Downloads
1,433
Likes
106
Rating
4.94
P
PrintablesBrody

Bambu Lab PTFE Connector

Bambu Lab PTFE Connector (6/8/2023) Designed PTFE connectors for Bambu Lab printers. There are two types of connectors, one that's compatible with AMS and another one that won't work with AMS. The AMS version is designed to push the tubes…

Downloads
1,426
Likes
282
Rating
5
P
PrintablesFreshPrints

Hotend PTFE Cutter Cutting Jig For Anycubic Kobra 2 Max Kobra 2 Pro Kobra 2 Neo Kobra 2 Plus Kobra 2 Also Included Universal PTFE Cutter

Cut a new PTFE tube for your Kobra 2 Serie Printer with confidence. Already premeasured just insert and cut. Note: This is the correct length from factory. If after you cut PTFE tube and you insert, and it appears to long. You will need…

Downloads
1,426
Likes
234
Rating
5
P
Printableshachleitner

Prusa CORE One Swing Arm Cable/PTFE Brackets instead of the inelegant Velcros

Prusa CORE One Swing Arm Cable/PTFE Brackets instead of the inelegant Velcro fasteners. If you don't like the cable/PTFE management with Velcro fasteners on the swingarm, here is a more elegant solution using printable brackets (cable…

Downloads
1,405
Likes
417
Rating
4.99
P
PrintablesGeekware

PTFE Tube Clips

For my setup, I needed some 5-tube straight and 4-tube straight arrays. After I printed those, I thought why be limited by the single straight array. Like a Knex or LEGO toy, if you have enough combination of pieces, you can construct…

Downloads
1,404
Likes
262
Rating
4.86
P
Printablessblomfield

MMU2S/MMU3 PTFE Tube Organizer/Guide

Holds your PTFE tubes from the MMU2/MMU3 nicely parallel - which helps to reduce friction. The part does not actually clamp the hose, but the friction should be enough to hold it in place. The model allows you to choose either an M3…

Downloads
1,396
Likes
267
Rating
4.94
P
Printablescmh

Guide funnel for loading filament into PTFE tubing

Simple funnel that presses onto the end of a 4mm PTFE tube so it's much, much easier to load 1.75mm filament into the tube. I've been using this for years anywhere that the printer has a PTFE tube as the inlet for filament and it makes…

Downloads
1,395
Likes
177
Rating
4.75
P
PrintablesEfe Balun

Ender-3 V3 KE Filament Sensor Mount (PTFE Tube)

I'm using a filament drybox so need to directly feed the extruder with a PTFE tube. I was looking for a viable option. Tried different approches with sensor keeping in it's current place but pressure between extruder and sensor feels not…

Downloads
1,393
Likes
224
Rating
5
P
Printablesk2thestank

Bambu AMS Feeder PTFE Adapter v2.0

Ok here is new newest and most recently updated BambuLabs AMS PTFE adapter v2 It's highly recommended to use 3-4" of extra PTFE tubing to reduce filament rolls from jumping inside the AMS when they get lower in material --------- In…

Downloads
1,373
Likes
411
Rating
4.43
P
PrintablesSpam N' Rice

@*!! Centauri Carbon 4 to 1 Hub PTFE Removal Tool

YouTube vid: Removing the PTFE tubing from the Centauri Carbon 4 to 1 Hub is RIDICULOUS! Designed this over complicated PTFE removal tool. Consists of 4 parts: Pusher Insert - pushes the hub down all the way until the spring is fully…

Downloads
1,354
Likes
116
Rating
4.82
P
PrintablesA. Fouani

MMU3 cassette PTFE fitting (collet)

PTFE tube fitting (Collet) for the MMU3 Cassette assembly, i went into upgrading my MMU2s to MMU3, upgraded from official printed parts, had almost everything in my inventory except for the collets, searched online stores but could not…

Downloads
1,349
Likes
194
Rating
5
P
PrintablesMongrel

Centauri Carbon PTFE Brace Bracket.

I've made my mod interchangeable with Ccraft3D design so you can take your pick of which pieces suit your needs.

Downloads
1,348
Likes
250
Rating
5
P
PrintablesOssie P.

Version 2.1 With Full PTFE Guide - Drag Chain Kit - Flashforge Adventurer 5M - AD5M

Version 2.1 - added “V2.1Guide.STL” Added "Adapter" Model with M3 Thread - Brass insert not needed. Original “Adapter” Model was renamed with “AdapterM3BrassInserts” as it uses M3 Brass Insert.

Downloads
1,335
Likes
204
Rating
4.8
P
PrintablesFumanseano

PolyDryer PTFE Adapter 6mm O.D. to 4mm O.D.

Adapter plug to convert the 6mm inlet on the PolyDryer to fit 4mm OD PTFE tubes. Now it's possible to directly feed from the dryer with a fully constrained reverse bowden setup. I have included the step files, so you can modify it to suit…

Downloads
1,324
Likes
199
Rating
5
P
PrintablesIsaacW

Prusa MMU2S Rear PTFE Holder

I wanted a quick and easy way to remove the PTFE tubes from the back of the Prusa MMU2S. I found that loading filament and clearing jams is so much easier when those tubes can be easily removed. The material doesn't really matter, as…

Downloads
1,321
Likes
176
Rating
4.89
P
PrintablesSanka

Guide Ptfe MMU top on prusa enclosure

This a guide for your Ptfe tubes on the top of Prusa enclosure. I make it for my (un)original prusa drybox systeme. 5 Spool rewinder adapter for MMU2S / MMU3 in (un)original Prusa drybox :…

Downloads
1,318
Likes
245
Rating
4.88
P
PrintablesLegufix

MMU3 PTFE tube guide

Because the filament is fed into the MMU unit at quite an angle in my buffer arrangement, I sometimes had the problem that the filament was pulled in by the pulley in such a way that the Idler output PTFE tube was not met (indicated by…

Downloads
1,298
Likes
364
Rating
4.93
P
PrintablesWilko

PTFE Tube cap with filament catch

Part of my filament storage are PTFE tubes. But having the filament ends loosely flying around isn't ideal. On the one hand they can absorb water from the air (depending of the filament type), on the otherhand it looks a bit messy. And if…

Downloads
1,293
Likes
156
Rating
4.8
P

Remix - Clip added - PTFE Bowden Tubing Adapter for Elegoo Centauri Carbon Filament Sensor

Thank you Marko Borsic for the original design. It fits great, and prints well. I've noticed that the stiff 6mm PTFE tube coming from my Polydryer filament box tugs on the adapter, and pulls up the side that the tube goes into. I've added…

Downloads
1,276
Likes
156
Rating
5
P
Printableswjsteele

3DChameleon Mk4 Upgrade Parts with PTFE Grip

This is a set of Mk4 upgrade parts for the 3DChameleon Mk2/Mk3 that allow the PTFE tubes to be gripped and held in place without the need for using the brass compression fittings. There are 5 models in this, the A+, B+ and C+ parts (which…

Downloads
1,240
Likes
173
Rating
4.56
P
Printablesmakemeone.xyz

Snapmaker U1 - PTFE Adaptor for Autofeeder - minimal print time

Why and what for This will allow you to connect 4mm OD (standard size) PTFE Tubing to Autofeeders of Snapmaker U1. You can customize all the colors. Discussion topic -…

Downloads
1,235
Likes
230
Rating
4.86
P
PrintablesTrix

Creality K1 PTFE Clip

Replacement PFTE clip for the Creality K1. Slight modification to the angle of the tab that should make it a bit easier to remove.

Downloads
1,221
Likes
141
Rating
5
P
Printables3DRA

Creality K1 MAX PTFE guide 90 degrees

90 degree PTFE tube guide. Together with the guide, I used https://www.crealitycloud.com/model-detail/657e19d8937557724252afab , reducing the height to 50% and https://www.printables.com/model/734259-creality-k1-k1-max-ptfe-tube-holder I…

Downloads
1,221
Likes
111
Rating
5
P
PrintablesE3D

Simple PTFE tube cutter

MODEL DETAILS A quick-to-print, simple jig for cutting PTFE tube . No need for support material. For outside diameter 4mm PTFE tubes. RECOMMENDED PRINT SETTINGS 0.4 Nozzle recommended. Other sizes should work. 0.2 layer height or smaller.…

Downloads
1,220
Likes
155
Rating
4.84
P
PrintablesDukeCGN

Quick PTFE Filament Tube change system for dryboxes

In order to change the filament quicker and more comfortable I made some small and easy to install parts in Fusion 360. With this you can change from one colour to to another by simply changing the PTFE tube adapter and close the box with…

Downloads
1,213
Likes
200
Rating
4.96
P
PrintablesBDuece
Downloads
1,199
Likes
186
Rating
4.88
P
PrintablesAntipode

Knurled PC4-M10 PTFE Drybox filament pass through

This is the version of the drybox feeder insert for using PC4-M10 fitting with the M10 x 0.9 thread. For the PC4-M6 version get the original design by RoboMagus (linked below). This pass-through adapter for a makeshift drybox solves…

Downloads
1,196
Likes
203
Rating
5
P
PrintablesCarlos Guerrera

AD5X 4-in-1 Bowden (PTFE) Tube Clips

4-in-1 Bowden (PTFE) Tube Clips Tidy up your AD5X' PTFE tubes with these clips. 5mm and 10mm versions. Prints in about 3 and 5 minutes respectively. Good project for left-over filaments.

Downloads
1,185
Likes
142
Rating
5
P
PrintablesEd Ivory

Dry Box PTFE Tube Passthrough

For building a filament dry box with PTFE tubes attached. This pass-through nut has a taper inside to fit the 1.75mm ID PTFE tubing I had on hand. This design does away with the PC4-M10 PTFE connector, saving the postal service from…

Downloads
1,178
Likes
207
Rating
5
P
PrintablesJC_Hood3

Creality Space Pi Filament Dryer M6 PTFE Adapter

This adapter allows the replacement of the rubber grommet for the 4mm PTFE tube with an M6 pneumatic fitting to avoid the PTFE tube from being pulled into the dryer. Update 4/19/24: I noticed that the adapter will loosen up after repeated…

Downloads
1,154
Likes
124
Rating
5
P
PrintablesKSipple

E3D Revo Six PTFE Cutting and Chamfer Tool for Prusa MK3S+

May 4th 2022 - Added v2 with a larger area to slide tube out and a hole on the end PTFE tube cutting and chamfer jig for Prusa MK3S+ with E3D Revo Six hotend. MK3S+ - 31mm and 60 degree chamfer MK3S+ - 33mm and 60 degree chamfer E3D did…

Downloads
1,150
Likes
169
Rating
4.93
P
PrintablesMichaelQ

Sunlu FilaDryer Filament Dryer S2 PTFE Adapter

With this PTFE adapter, you do not need to drill holes into your Sunlu FilaDryer S2 to attach it. The connector is attached with some double-sided tape. I used 3M VHB foam tape, it is strong but easily removable. You need to remove the…

Downloads
1,150
Likes
153
Rating
4.94
P
PrintablesMAKERTEAM®

Bambu A1 AMS Disconnect Tool for PTFE-Tubes

This little tool is a great help if you need to diconnect the PTFE tubes of your A1 (mini) AMS. Just put it around a tube, press it down and pull the tube out of the printers hose bracket as shown on the pics. Material: PLA/PETG…

Downloads
1,135
Likes
110
Rating
4.89