Search results: pull

60T GT2 pulley

60-tooth GT2 pulley with 5 mm bore. Support yes Print with 5 perimeters, infill 50%, filament PETG, layer 0.1 mm.

Reinforced Zipper Pull

This remix of N00P's zipper pull should be a tad stronger. I liked the design, but it kept wearing out. Please iterate on this one and make it even better! I encourage you to use your Slicer of choice to scale both pieces in thickness…

Cabinet Furniture Grip Knob Pull Handle Griffmulde Möbelgriff

Printed without support Designed to be mounted with wood screws from the back. CAD Model…

Pulleys for storing stuff

Once I bought some pulleys to hold my ladder up to the ceiling, but they were not strong enough one day they broke. So I designed new pulleys, and I designed them in such way outside would look the same, both halves would be the same so…

Pull Start Handle/Griff Seilzugstarter Honda GX

Mir fehlte einen Griff für meinen Honda GX270 Motor. Ich habe von meinem Ersatzmotor den griff nachmodelliert und für das Drucken angepasst. Gedruckt wurde aus ASA, liegend und mit 4 Randschichten. Support wird benötigt, kann allerdings…

Zipper Pull - Double Happiness

Items you need: 2 x “4mm x 30cm” paracord. *4 x “3mm (diameter) x 2mm (thick)” magnets (neodymium magnets are recommended for better holding power). Super glue (for magnets). *If you do not have magnets, I have included a 3D printed…

Pull copter ring rotated 90 degrees

Pull copter ring rotated 90 degrees. Not tested. If you print it, please post a make ;)

Roller blinds ball chain pulley

Originally made by Lundiplutzmus. Modificated to mount flat against the wall. Put the 2 halves together install with 1 screw against the wall. Easy to print. I'm printing all my parts in PETG (the added gcode is for PETG), but use your…

pulling rope handle / Zugseilbommel

If ever someone asks you to get rid of those loose ends, this is what you'll be looking for. Printed with PLA: 2 perimeters 15% infill 0.4mm nozzle 0.2mm layer height (use .10-.15mm for threads with V2) Increase infill percentage if you…

Pulley Ramp

Bought the RAD Sportz Bicycle Hoist and saw what many had complained about, the loose pulleys. I made some quick shims, which worked well, but they didnt stay in. Added the bottom groove to hold them in, made too much pressure at the top.…

Ikea VARIERA pull out box insert

This little organizer box is designed to fit inside the Ikea VARIERA pull out box. Everything inside the box always moved around so i designed this box to better organize the stuff under my kitchen sink. INSTRUCTIONS FOR PRINTING 0%…

Blinds Cord Pulls

Simple cord pulls that were printed with PETG. These were made to replace missing cord pulls of the same shape. The center pull in the picture is an original pull made out of wood.

Retro Pull-horse and Other Animals (Tahací kůň a další zvířátka)

Introduction This is a recreation of a classic kids' toy that your granddad and mine used to play with. Try gifting this to kinds once they got tired of all the articulated animals you've been printing. Printing Each toy consists of: 1…

Honda ATV Choke cable Insertable Nut (Under choke puller on handlebar)

Stripped nut replacement for Honda ATV Choke cable Nut (Under choke puller on handlebar). Insertable nut, to avoid having to remove the whole choke cable. You can also insert the small threaded part an glue it to make the nut complete. V1…

Strong Flying Propeller / Pull Copter (No Supports)

Update 10.02.2023: I remixed the rotor with the toroidal design :) Feel free to test ist out! https://www.printables.com/model/394700-toroidal-rotor-4-strong-flying-propeller In addition, there are now many other great remixed propellers…

Spice Rack Pullout

I am glad so many of you are enjoying this design. No, this design is not available to license or to sell. I wanted a better way to organize the spices in a cabinet but having it occupy a limited amount of space. I designed this pullout…

Pull Copter Finger Ring

Like this design? Check out the Pocket Copter! Fast to print and assemble. No screws or glue needed. Prints without Support Structures: https://www.printables.com/model/421807 Pull Copter Finger Ring Projectvideo:…

Keycap puller supreme

This keycap puller is a simple and effective tool for removing keycaps from your mechanical keyboard. It comes in two versions, a short and a long one, to accommodate different keycap sizes and styles. The design is user-friendly, making…

Robust Zipper pull replacement (Ratchet)

Might be slightly over-engineered, but I always keep a few different sizes on my key-chain. That way I'm always ready, when a zipper pull on or around me breaks. Saved me and my friends a bunch of times already. Print recommendations:…

Keycap puller

A very simple key cap puller for computer keyboards. I guess I could have just printed someone else's design but I just made my own in fusion 360. V3 is thinner to get into tighter keyboards

GT2 Pulley - the big collection updated

PROJECT HISTORY Edit 20.4.2023: HUGE UPDATE I completely remade my parametric model that helps me generate pulleys more easily. As a result: I reuploaded all files with cleaner .stl files. Now smaller pulleys available - some have very…

Pull Handle Collection for M5-M10 Screws

Collection of Pull Handles for metric screws including : M5 M8 M10 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material.

Strong Pulley 100% 3D Printable, Scaleable & Durable

Heyho Here I have a completely 3D printable pulley for you! I recently designed an attachment for my clothesline (which also works great!) and of course the idea came up to simply use a pulley! Previous designs I found online always…

Zipper pull

A replacement zipper pull I made when the one on my backpack broke, and I couldn't find a satisfying replacement. I've used it daily for over a month now, and have no complaints. When slicing the base, please orient it hole-down for best…

Zipper Pull - Ghost (Pac Man)

Items you need: 2 x “4mm x 30cm” paracord. *4 x “3mm (diameter) x 2mm (thick)” magnets (neodymium magnets are recommended for better holding power). *2 x “12mm” wiggly eyes. Super glue (for the eyes and magnets). *If you do not have…

Mechanical keyboard MX switch puller

Tolerances will be tight but it works fine for me, if you encounter any compatibility problems leave feedback and I will adjust the model. I also provide two different versions so you can pick the handle type that you prefer. Version 2…

Spice Rack Pullout with Metal Rods

I am glad so many of you are enjoying this design. No, this design is not available to license or to sell. I redesigned my original Spice Rack Pullout I designed this pullout spice rack to allow for one, two, or three pull out shelves for…

Involute GT2 Pulley

There are already working implementation of 'gt2 pulleys' available. Nonetheless that implementations are mostly based on SCAD which results in mesh files. If you prefer to model project parts directly in Fusion 360, this thing is for…

Pull Copter Finger Ring - Print in Place

This is a remix of agepbiz 's Pull Copter Finger Ring . No assembly required! (Although you do need to remove some support material.) I merged the ring and frame parts together, removed the no-longer-necessary screw holes, and changed…

Pull-Handle Set: Modern, Lightweight, and Sturdy

Modern, Lightweight, and Sturdy Pull-Handle Set Introducing our versatile pull-handle set, perfect for anyone seeking a durable and stylish solution for their home, office, or project. Designed with a modern industrial look, these handles…

Pulley GT2 - 20T B5

GT2 - 20T Tensioning toothed pulley with bearing for toothed belts GT2 - 6mm. For 5mm axle.GT2 pulley for NEMA 17 motor with a 5mm shaft. These pulleys include 2 M4x4 grub screws. Created by dzino GT2 - 20T Napínacia ozubená kladka s…

Way over-engineered pullcopter v3

Update: See Pullcopter V4 on Thingiverse , currently entered into a contest there. I thought it would be fun to design a pullcopter toy with over-engineered features, that is, interesting improvements that aren't necessary for the…

Improved 3D Pull Copter Finger Ring - M3 screw version

Improved version of the 3D Pull Copter Finger Ring with a different rotor design. NOTE: Models not compatible with original design Features: Improved rotor design (bigger and angled differently) Somewhat longer key for easier use Uses M3…

PC Blend Prusa Pulley

This Pulley is universal and recommended for various purposes. Fine example is yachting. It is made from three parts and connected with M4 screw. In case you need different size, you can scale it to 125% using M5 screw, 150% using M6…

Elegoo Centauri Carbon Nozzle connector puller. Left-side with Handle

Centauri Carbonのノズルの左側コネクター取り外しジグです。 This is a jig designed to remove the left-side nozzle connector of the Centauri Carbon.

Elegoo Centauri Carbon Nozzle connector puller. Right-side with Handle

Centauri Carbonのノズルの右側コネクター取り外しジグです。 ペンチで外せますが専用ジグがあると便利なので作りました。 This is a jig designed to remove the right-side nozzle connector of the Centauri Carbon. I designed this dedicated jig to make the process easier and more convenient.

BentoBox v2.0 5015 pull-configuration case+shroud

Negative-pressure (pulls air) 5015 fan case and shroud for the BentoBox v2.0. The new V2.0 BentoBox design is great, however I do not agree with the original authors fan choice; 4020 axial fans have very low static pressure of around 7 mm…

Cable pulley

Simply print both parts in the uploaded orientation. I recommend using PETG, because you have to drive two M3 screws (ideally 8mm long, but 6mm should do as well and 10mm should just work) into the spinner. The screws are self-cutting…

Pulley and M8 Threaded Clips for Filament Rollers

This is one component of Yet Another Drybox . If you are planning to build your own box, have a look! You might find other components useful for your build, or maybe you even end up building the complete box 🙂. For building a filament dry…

CORE One belt-tensioner-pulley to take a threaded insert instead of the original square nut

What is galling? galling noun : a type of wear caused by friction between metal surfaces, often leading to parts sticking or seizing. Example: "Galling can lead to a nut and bolt binding under high pressure." adjective : extremely…

Timing Pulley GT2 (20T, 8mm bore)

Timing Pulley GT2 20 teeth Bore 8 mm Body dia. 16 mm Body length 16 mm Belt width 6 mm

Guitar Knob Puller

This is a easy printable tool to safely remove guitar knobs by allowing you to equally apply upward pressure to remove it. Also, using plastic will not scratch or harm your guitar compared to prying it off with a screwdriver or pliers.…

Zipper Pull (< 5 min, < 0,5 g)

Did your zipper tear off while searching for Bigfoot? No worries, I got your back! This easy-to-print zipper can be printed within 5 minutes and will stand up to Bigfoot himself! Try it out if you don't believe me! * Bigfoot roars in the…

Nipple Puller

Rose Cabinet Pull

Here is the file for a Rose Cabinet Pull, this is designed to take a M4 Machine screw in the back face. obviously this would be best printed in Resin but can be printed in FDM too and still gives a nice effect. 👍 I hope you enjoy. Thanks…

[OEPU] GT2 Pulley Collection - Parametric

GT2 belt pulley parametric model for fusion 360. Use the .f3d-file to adjust parameters the bore size limits the minimum circumference / amount of teeth. If you do not have fusion, I hope a fitting size can be found categorized below as…

Zipper Puller

28 mm paper clip is used as a base 🖇. Simple design made in fusion 360. Instead of a paper clip, you can use a piece of wire. When assembling, use glue 💧 It is better to place the paperclip so that its ends face the inside of the hexagon…

Paracord Zipper Pull / Charm

This zipper pull print can add a custom decorative flair to an otherwise boring bag, backpack, or jacket. However, it's use is not limited to just zipper pulls. It can also be used as a: Keychain Pull chain finial Luggage charm Low-effort…

Extruder drive gear removal tool (puller)

When planing extruder upgrade on my Creality Ender 5 Pro I discovered that drive gear is push fitted on the shaft and there is no easy way to remove it (WD40 + pliers didn't work). So I've designed a small tool (a puller) to remove the…

TPU Panty Puller

TPU Panty Puller (BETA) by Qwerm Is your THICK magazine to much for that TIGHT little mag pouch to handle? A magpul-like magazine puller based on Weapons Grade Waifu's panty magpuls that they no longer sell. I'm considering this release…

MMU2S pulley-body mod

This mod of the MMU2S part mmu2-pulley-body decreases the space around the pulley axis and has more support guiding the filament than the standard part. When printing flexible filaments through MMU2S they tend to get stuck in the pulley…

Pull Handle

This pull handle has been designed to be printed as a single piece/component without supports. The original intent of the component is to mount to either a Creality Halot Lite resin printer, or a Creality UW 02 Cure and Wash station; Take…

Umlenkrolle/ redirect pulley

Einfache Umlenkrolle, für schwerere Lasten anstatt den Bolzen eine M12 Schraube verwenden Simple redirect pulley, for heavier loads use an M12 screw instead of the bolt.

Parametric pulley

This thing will create a range of metric and imperial tooth profile pulleys, with any number of teeth, specified in the Openscad file. Tooth profiles currently supported are: profile == 1 for MXL profile == 2 for 40 D.P. profile == 3 for…

Paracord Pulley (100% Printable, Holds 200+ lbs)

Introducing the ultimate solution for your camping and outdoor needs – the Super Strong 3D Printable Camping Pulley! Designed for durability and versatility, this pulley is perfect for a variety of tasks, from setting up tents to creating…

Flying Propeller (Pull Copter) & Spinning Top (No Supports, No Assembly Required)

Product Description: Introducing the Pull Copter, a 3D printable toy for kids and kids at heart. It comprises just three parts: the pulling rod, the propeller (or spinning top), and the base. There's no need for assembly—print, play, and…

PULL CORD HANDLE - ROPE HANDLE - (Scalable)

Perfect for pulling cords - Easy To Print Further scalable in the slicer software

608 Pulley

Very strong pulley that uses a 608 bearing. I designed these to be easily mounted with wood screws and to withstand a lot of weight. They work great with paracord and can be used for a lot of different projects. Instructions : Use infill…

Project: Pulley systems V2

To demonstrate how simple and multiple chain hoist/pulley block work we need to have one or more pulleys. A functional single or multiple pulley is the result of this project. It can demonstrate the transmission of forces and weights in…

pulley / snatch block with planetary gear bearing v2

NEW – v2: Better planetary gear (more planets, deeper teeth) and better shape (so the rope doesn't jump off the pulley). Also using my own planetary gear code now. ------ A quite strong pulley / snatch block utilizing a planetary gear as…

Spice Rack Organizer | Pull-Out Holder | 5 Jars

Spice Rack Organizer is a practical under-cabinet storage solution that helps keep your favorite spices organized while freeing up valuable countertop and cabinet space 🧂 Easy installation using double-sided tape or 4× countersunk screws…

K1 & K1 Max Stepper Pulley Remover

Stepper pulley remover for the K1 nd K1M stepper motors. This was designed in an effort to remove and replace the 36t pulleys on the stock steppers, this resulted in a shift that lowered the threshold of VFA from ~250mm/s to ~175mm/s. We…

Keyboard Key-cap Puller - two versions

Sometimes I like to try out an idea in 3D printing even though I think it may not be the best choice for a particular application, because it helps me to test the limits of what is possible. With that in mind, I can say that these key-cap…

Wheel bolt cap puller tool VW Audi Seat Skoda

Thing name says it all :) Print Settings Rafts: No Supports: Yes Category: Tools

PC Blend Carbon Fiber Prusa Pulley

The redesigned version of the original Prusa Pulley for PC-Blend. This lighter version saves material but is still perfectly strong using the PC-Blend Carbon Fiber. PC-Blend Carbon Fiber is slightly lighter than unmodified PC-Blend, with…

Press Fit Pulley Extractor for Nema 17

This model is inspired by Jake_of_all_Trades Pulley Extractor (https://www.thingiverse.com/thing:3593964) but with changes: fillets added (for removing failure point when using excessive force) chamfer added (removed sharp edges for…

Longer key for Pull Copter Finger Ring

2× and 3× longer copter key for better fly ;-) Remix of https://www.prusaprinters.org/cs/prints/35410-pull-copter-finger-ring Enjoy it!

95 Paracord Zipper Pulls

Following the example set by nemokeine the holes in these have been enlarged from 3mm to 4mm for an easier time getting the 95 paracord through armourcraft's models. 95 paracord is thinner than the more widely know 550 paracord. Shown…

V1.0 Universal Keycap Puller [Apex 9/Pro Replica] *V2.0 AVAILABLE*

V2.0 is available here, the model you are currently seeing is outdated This keycap puller is a V1.0 replica of the Apex 9/Pro. It is a replacement if lost, broken and is compatible with any keyboard . It allows easy and safe removal of…

Pull Copter Finger Ring - Print-in-place REMIX

Improved version that prints in-place and the ring is attached later. I recommend to sand the surface that connects to the base. I have not changed the blade from the original model. The key is also offset for easier hold.

pulley system (block and tackle) with gear bearing pulleys

For my previous design I added some rims to emmett's gear bearings , and I thought that this called for using it as a pulley - so for the mechanical marvels competition I made a pulley system (block and tackle) to combine 3 mechanical…

Lawnmower pull start handle

a print friendly replacement to your pull start lawnmower. My dog chewed mine up so i had to replace it. I havent printed yet cause i havent printed in ABS or PETG yet. if you print let me know how it works and if anything should be…

Bearing pulley

So, i had to replace the 40 yo. pulley from the top of the mast of my boat and i decided to print one. I decided to make a bearing pulley so it would run smoother. It has very tight tolerances so you have to break the gears free with a…

Spice Rack Pullout: Tall Top Piece

I wanted to double stack large spice bottles using the Spice Rack Pullout by SpongyBob so I made a version of the larger bottom part that can stack. You'll still need all the other pieces of the original set to use along with this part.…

Pulleys GT2 - 20T set

Pulleys GT2 - 20T created for 3D printing. For GT2 6mm belt. Created by dzino

Keycap puller that won't scratch your keycaps

I needed a keycap puller that won't scratch my keycaps so I 3D modelled one that resembles the popular one with metal wires. You need to print two pullers and insert them into the holder. They have holes so you can stick a piece of…

hair puller/cutter

for the ease of removing hairs stuck in wheels, brushes or any rotating object that can tangle them

Lego stud drawer pull / knob

I'll be honest: printing oversized Lego bricks is the main reason I got into 3D printing. And they're a blast! This is a remix from @MagnumDanger's Lego Wreath on Thingiverse. This user redesigned the Lego brick to not need supports when…

Spice Rack Pullout remix - Wide.

ABS, PETG, PLA are OK. Better to have supports on overhangs of top & bottom shelves. As someone commented, i should clearly mention that top part is higher, than original. Beware: top part of this item is 132.6 mm in height!

Mickey Mouse Keychain Zipper Pull

The 3mf file has been colored for printing on Bambulab with AMS. The Mickey Keychain LayerHeights file has the colors at different layer heights so you can filament swap for multi color. It makes a great zipper pull for backpacks.

AM43 Blind Motor variable drive pulleys for beaded chain roller blinds

These pulleys are designed for chain drive roller blinds. The original pulleys supplied with the blinds often skip steps, are noisy and do not support larger and heavier blinds. Use the pulley corresponding the size and weight of the…

Minnie Mouse Keychain Zipper Pull

Minnie Mouse Keychain/Zipper Pull. It makes a great zipper pull for backpacks. I've included a regular stl as well as two colored files for Bambu Lab AMS (one flat).

Nail Polish Shaped Can Tab Opener / Soda Puller

Nail Polish Shaped Can Tab Opener Practical tool designed to protect your manicure by opening soda tabs effortlessly. Featuring a unique nail polish design , it combines style and utility, making it a perfect gift for anyone who loves…

HSW: Easier snap in / pull out insert for honeycombwall - Easy Plug

As I had some problems with removing (and inserting without a hammer) different types of inserts, I made my own version. This version has to be inserted in the correct way as it has a top (the thick side, see arrows on the back of the…

Easy Bolt Action + T-Pull Mod X-Shot Fury-X (simply slide over the picatinny rail)

UPDATE: additional versions with EXTENDED bolts ------------------------------------------------------------ Easy Bolt Action Mod ---> X-Shot Fury-X To make the FuryX, bolt action or T-pull primeable - just slide it over the rear…

Slightly over engineered Pull Copter flies over 20 meters

This one Really flies high! Update 23/03/09: I have been breaking many pulleys (for science!), and today a friend of mine also complained that his kids broke theirs, it couldn't have been any coincidence, so after looking better in cad… I…

V2.0 Universal Keycap Puller [Apex 9/Pro Replica]

This keycap puller is a V2.0 replica of the Apex 9/Pro. It is a replacement if lost, broken and is compatible with any keyboard . It allows easy and safe removal of keycaps without risking damage to the keycaps. This is an upgrade of my…

3D Print GT2 80t 5mm Bore - 6mm Belt Pulley (Remix)

This is a remix of thing:5158444 that I modify to suit my need the original design is working ok, but I want to simplified the 3D model.. I'm omitting the screw-assembly and opt for glue-assembly only, adjusted the locking-tab and notch…

Classic Zipper Pull for Zippy Bag Clip and Zippy Fidget

I loved LoboCNC's zipper bag clip but I wanted it to look more like a standard zipper. This will also work with LoboCNC's Zipper Fidget. I scaled a model from David Naoum on MyMiniFactory till it looked good and cut of the crown and pull.…

Fuse case and puller for low profile and mini car fuses

This is a single piece case to hold 40 mini or low profile mini car fuses and a printable fuse puller. I printed in PETG on a MK3S+ using PrusaSlicer's 0.2mm settings.

Elegoo Centauri Carbon Nozzle connector puller. Right and Left combined

Centauri Carbonのノズルの左右一体のコネクター取り外しジグです。 個人的には左右は独立したジグの方が左右一体型よりも使いやすいと感じました。 Elegoo Centauri Carbon Right and Left combined Nozzle connector puller. In my experience, having independent jigs for the left and right connectors offers…

Pull Copter

I had the idea to make this model after seeing the extremely popular Pull Copter Finger Ring by agepbiz, sadly I soon realized it contained 5 parts and needed screws so I set to work redesigning the pull copter and optimizing all aspects…

Parametric Timing Belt Pulley

Customizable Parameters: Tooth Profile (GT2, HTD 3M, HTD 5M) Tooth Count Tooth Width (Belt Width) Bore Size Snap-Ring Size Grub Screw Size What you need to know: Printed in two parts. A metric snap ring/retaining ring (DIN 471) is…

Splatoon themed keychain / zipper pull

Two models have been provided, print at 0.20mm layer height: “double_sided” - print 2 of these and glue together (CA glue is fine) for a nice two-sided keychain; bonus if different colors for squid body are used! Color changes at the…

Mickey Hand Keychain Zipper Pull

Mickey Mouse Hand Keychain/Zipper Pull. It makes a great zipper pull for backpacks.

Parametric HTD Pulleys

These were made in Fusion360 and are free to use! The 3M and 5M pulleys have been tested to work on a number of pulley tooth counts however the 8M pulley is currently untested. Please let me know if you use them, if they help, or if…

Snatchblock Mini Pulley - 608 Bearing

A smaller version of the Snatchblock Plus . Try the Skeleton Zero Mini or the Pure Zero Mini if you don't have the M3 bolts. Light duty - 25lbs max Dimensions - 70mm x 33mm x 19mm Required hardware 1x - M3 16mm hex socket cap bolt 1x - M3…

Creality Ender 3 v3 (E3V3) SE KE Dual Z Axis Pulley Belt Tensioner

Required parts: 2x M5 x 16mm 1x M3 x 12mm 1x M5 Washer 2x F695 Bearings The washer should go between the top bearing and the printed adjuster. Snug the M3 x 12mm screw, but do not tighten it. The bearings should spin freely. If you don't…

Paracord 550 zipper pull / bead multiple versions + letters

Multiple versions, also with all letters of english alphabet. Extra version for single paracord strand. I use lighter and pliers to fuse both ends of paracord and hide connection inside opening at bottom. No supports needed, print in…

Beefier Zipper Pull

Remix of op00's Zipper Pull . I needed a couple of new zipper pulls for a laptop bag that sees daily professional use in the field. It has a really fat zipper with quite a heavy pull. The original design by op00 was great, but far too…