Sony WH-H910N, MDR1000X, WH-1000XM2 Replacement
Tested it on my headphones, a tight fit but will surely work. I have added working height adjustment brackets too.
- Downloads
- 787
- Likes
- 47
- Rating
- 4.8
845 models
Tested it on my headphones, a tight fit but will surely work. I have added working height adjustment brackets too.
Mounting a E3D Revo Micro on Creality Ender 3 , CR10 , Sunlu S8 and many more printers. Bowden-Setup and Direct-Extruder with Annex Engineering Sherpa Mini ! Silent Setup with 5015 Blower and 40x40 axial Fans. Detailed build instruction…
This part fits a Kohler pull-out faucet handle (Forte Kitchen Sink Faucet K-R10433 with various finishes, one UPC is 0650531224743) that is discontinued and replacement parts (K-1346768) are not readily available, or expensive. This…
I made this model from scratch, but this is a remix from another model for an Esun spool adapter, but I do not remember from where I got it. I just added a nut for a sturdy fit. Easy and fast to print with PLA or PETG, 15% infill and 0,2…
This fan guard will fit over the 20mm X 20mm fan that comes with the Hobbywing XR10 Pro-Stock Spec ESCs, etc. ( HobbyWing HWI30860500 ) It will require M2.5 X 12mm screws, but it will protect the blades from being hit and also from having…
Cambridge Audio AXR100 remote holder with room for 1.26 inch x 1/8 inch disk magnet 1.26 inch x 1/8 inch magnets Printed on a MK3.5S 0.6mm nozzle Orca Slicer 2.3.0 0.35mm layer height textured powder-coated Print Sheet
Taurus V5 Final Release Part of this release in the display case for Klipper WiFi connected TFT displays, please check it out: https://www.printables.com/model/624504 We're sorry this took so long, but the V5 changes were quite drastic,…
This print consists of the base and 3 thumb screws for leveling adjustment. The base can be printed as a single color, or with 2 colors for MMU2S users. Import the base STL into PrusaSlicer and choose ‘Split to Parts’ to see the alignment…
After a few failed updates from Cura and general instability, i made the move to Prusa Slicer 2.1. I tweaked the profile with a few test prints, and i find the results better than Cura. It should be a good starting point for anyone trying…
X gantry model I recreated of the Ender 3/pro/3v2/CR10 (v1) Holes are perfectly aligned, I then used this to design shrouds (like the MarsOrbiter, SaturnOrbiter and ApolloLander, of which I never received any complaints regarding mounting…
Extruder ribbon cable strain relief cable guide Fitting a cable guide to your printer allows the ribbon cable to flex gently over its length rather than bending all in one place - which can lead to broken wires. This unfortunately is a…
Latest Update on 10/18/24: For latest profile use - Folder: ORCA Profile Creality CR 10 SE_Enhanced_10_18_24. Check out Screenshots for performance results. I have created and extensively tested these profiles. It has given great results…
This model is a remix of my previous bullseye spirit level stand that used an alignment stick. Now to get the path tight, we will use a laser! This print consists of the base and 3 thumb screws for leveling adjustment. A Ryobi Laser Cube…
Please visit my Github Page to get a better documentation of this mod! Versions/Variants Hello and welcome to the Belt Driven Z Mod. Versions/Variants 1: Stock V-Wheels 2: MGN-12H 3: Dual Z (Wheels and MGN) STLs, Bill of Materials and…
Filament guide for Creality CR-10 Max / CR10s-Pro. Prints in one part, no supports, no extra parts, press fit. Updated version adds opening at the tip of the guide for easier feeding and pushing of filament into filament sensor and bowden…
Thought I'd design a simple dust cover to keep the screen of the Nebula Pad clean for those times that I do use it. I also made one that can double as a scraper for getting your stuck prints of the bed (although I'd wouldn't vouch for the…
This is for mounting the bambulab (x1 or p1p) hotend to a creality machine like the ender 3 (v2) and similar. It allows the mounting of the Bambulab Hotend on a MK8 style carriage like most Creality printers and clones. While the…
For those of you who like to go the minimalist route... From the same designer that brought you all the popular Hero Me remixes... MediaMan introduces the The E3D Minimalist. A simple, clean, lightweight, yet strong mount for your…
This is a design of direct extruder with bmg + V6 / V6 Volcano for Ender 3, Ender 5, Ender 5 Plus and CR10. Attached you can find the assembly instructions, material list and all stl files you need to make it. Buy through the links or…
If you like it feel free to leave a comment or even better,buy me a "coffee": https://www.buymeacoffee.com/redangel1984 If you are looking for bracing/stiffener for your printer which uses 2040-AluminiumExtrusions for the frame, look no…
Hydra Fan Duct & Tool Change System for Ender 3 Ender 5 & CR10 See Below for Updates, V6 Edition Here: https://www.thingiverse.com/thing:4253359 Firstly many thanks to AlfaBarion for suggesting such an incredibly clever name for this…
This six slot, vertical, AR-10/LR308 magazine holder can be mounted with either female threaded magnets, or screwed to the wall (pre-centered holes provided). If using magnets, I would recommend a minimum of two 35lb+ Neodymium magnets. I…
This model was created by Coolcrawler_ on Thingiverse. Check them out at https://www.thingiverse.com/Coolcrawler_/about The stock extruder on most Creality printers is known for its flimsiness. This replacement is a must-have for those…
After trying different ways to mount my Logitech c920 onto my Ender 3, I decided I wanted a way to mount the camera off the bed or Y axis. I came across @SCHEMENKE's design for an iPhone mount and thought it was a brilliant design. So,…
Hi, this profile works perfectly for my printer and I get really good quality prints. Make sure you calibrate yours and double check my settings for compatibility issues according to your mods or others. Check my other CR10 Smart Pro…
Z axis knob to match the extruder knob by Sirpug. CR10 / Ender 3 extruder knob by Sirpug - Thingiverse Threaded section was pulled from another Thing. I printed Thread_test first and found I needed to scale the knob 103% on X & Y to have…
This is a 2 parts quick print to attach a Spool on top of the Creality CR 10 ptiner. Use the provided steel bracket as part of the assembly. The print of each part takes About 30 to 40 minutes. Category: 3D Printer Parts
MODEL DETAILS Now that Revo CR is released, we'd recommend using it as it is a much quicker upgrade! More here: Revo CR for Creality printers upgrade guide The original upgrade guide for Revo Micro can be found here . Ender 3/CR10 upgrade…
Edit 06/07/25: Added smooth versions of the grip without the finger slots and uploaded the fusion360 files to make life easier for anyone that wants to remix, I didn't realize in all this time that I didn't upload it :( Post your make if…
WATCH THE VIDEO BELOW TO UNDERSTAND HOW TO USE THESE PARTS THIS PAGE IS FOR THE PARTS COMPATIBLE WITH THE CR-10 SMART. YOU CAN FIND MY “EASY SWAP” PCB KIT HERE:…
Simple magazine storage racks for Magpul LR308/SR25 Magazines.
Sisters birthday this weekend, so I printed up a dozen gear hearts https://www.thingiverse.com/thing:243278 and a cool fruit bowl for them to go in. Bowl was a remix from https://www.thingiverse.com/thing:1596737
These are just a remix of the original Prusa Anti-Vibration feet by Alexander designed to fit over the rubber feet on the CR-10 Smart Pro, may also work for the CR6-SE and CR-10 Smart but I cannot confirm.
This model has been ripped from the RIDE 5 games files. All credit/ support should be directed to Milestone s.r.l.
FULLY MOVEABLE KUKA KR10 INDUSTRIAL ROBOT Consists of 7 separate parts. A great thing to understand the movements of the robotic arm. Each part contains holes for the protrusions of the adjacent part. this design was made by Yokata, the…
Got a CR10/Ender 3 with a Magnetic Steel sheet? Hate aligning it? Me too! This mod screws in above your springs/ spacers, and gives you the best alignment possible for your bed, similar to a Prusa. Can work in conjunction with TH3D Cr10…
A stand for the Garmin R10 Approach, that will allow you to level it on the course, or at the driving range. The hole in the middle if designed for a 32x7 mm levelling bubble. Print at 0.10 layer height for best results.
Bed leveling adjustment wheel nut lock Developed by MAXPROBE for Creality CR10 Smart Pro printers with the red metal leveling wheel nuts. These wheel locks are low profile and prevent the bed from self-adjusting or being accidentally…
December 2024 update I'll be restarting this project in 2025 and will have a full bom and print list available! It's been a crazy 2024 and i haven't had the room, space or time to design anything for this project other then a few tiny…
Use m3 heat insert, stock fan, stock screws. Must be slightly higher than nozzle, on equal distance. Tree supports in easy removable places. Layer height 0.14-0.16.
Beschreibung Diese Gegenlichtblende, welche auf das Objektiv mit Bajonettverschluss montiert wird verringert Streulicht Print Settings Printer: Prusa MK4 Supports: No Resolution: 0.2mm Filament: PETG black Update: 20260730 - Update…
V2 NOW RELEASED Note: This will NOT fit the Ender model hot end at all. Only CR10S Pro model from MicroSwiss. ( https://store.micro-swiss.com/collections/all-metal-hotend-kits/products/all-metal-hotend-kit-for-cr-10-pro ) This work is a…
Transfered from Thingiverse UPDATE 21. Sep 2018 I love how this is turning into a team effort. Janis Rocans was so kind as to share his update to the electronics cover that fit the newer boards for the 10S. He also included a picture and…
As the name describes it it's a little adapter that makes it so that you can mount your side mounted spool holder on top of the machine, it's someone else's design originally but I remixed it so that I could mount it on top of my CR10…
Locking bed leveling knob for the Creality CR10. This design has snap features that keep the knob in place during/in between prints; so no more vibrating out of position or accidentally nudging the knob. The snap features also give…
Replacement knob for Makita DMR106. Not sure but might fit to other similar radio models as well.
Update I thought I could increase the airflow a bit more, allowing it to focus even better by cutting out a bit more material. There are two additional versions. One with a crescent cutout and the other with more of a 'ramp'. Every little…
Detailed write up to come; Box contains: BTT SKR E3 v2 Raspberry Pi 3B+ Solid State Relay EZ-ABL Board DC Buck Converter (12v to 5v for RPi) 2x 40x40x10 fans Check my profile for the rest of the components: PSU Mount LCD Mount…
Designed a mount so you can use a dial gauge to get your print bed super level and dialed in. The mount has been made to fit loosely so it can be shimmed with masking tape to get a perfect friction fit on the bar. Bed leveling procedure…
Stp file for the cr10 Bambu clone hotend, received the file from the seller i bought it from from ALI.
https://www.printables.com/model/1174545-duender-2x-creality-ender-3-corexy-convertion Most of the build is the same as the original Duender. Use the Duender STEP file alongside this one to figure out the build. The BOM from there should…
Replacement for the stock Improved CR10S Pro part cooling fan duct File types: .stl - Ready to print .f3d - Editable Fusion 360 file - Includes a 3D scan mesh of the stock fan and extruder
Ender 3 CR-10 PLA Petg temp tower. To change the temperature automatically download the Gcode
This is a vise block or bench block to mount in an AR10 mag well. Used during assembly and maintenance. Best printed at 50% or better infill if you plan on really clamping in the vise or to the table.
Basic wrench/tool for loosing and tightening AR10 / AR15 butt stock nuts. Best printed at 50% infill or better for best use.
After much frustration and perseverance, I decided to ditch Creality's poor attempt at cloning an E3D V3 hotend, and the terribly unfriendly housing that is a PITA if you need to access the hotend. Using a fantastic model created by…
Hi, these are my settings for perfect TPU prints with my CR10 Smart Pro and Fiberflex 40D from Fiberlogy with Orca Slicer and Klipper. For Cura with Marlin: https://www.printables.com/model/977198-cura-cr10-smart-pro-tpu-perfect-settings…
Here is my Cura profile for CR10 Smart Pro. There are 2 profiles, #2 uses a default mesh saved to the epprom so it won't create a mesh at the start of each print. This worked for me for months without recalibration needed. Check my other…
mount for your RC plane for Frsky TDR10 receiver receiver : https://s.click.aliexpress.com/e/_Dks9clX
FrSky TD R10 mount including 2.4ghz antenna mount. Receiver is mounted to holder using thin tape. holder and antennas secured with zip ties. The original OnShape file for editing can be found here…
As I will change the default extruder and print head to a new one I needed a model of the current X Axis Plate of the printer. So I've tried to measure everything correctly. BUT it may be that there are still some mismatches between the…
This is the control box for my CR10s All In One project. The control box houses the BTT SKR Mini E3 v2 along with a Raspberry Pi. I converted my CR10s from 12v to 24v. I design this case and the power supply to not need any supports. You…
BMG V6/Dragon directdrive mount CR10/Ender3/TevoTornado V2 added Remixed from the most rugged, solid and best performing direct-drive mount, credits for the original design goes to @VykkuF ( https://www.thingiverse.com/thing:3747412 )…
Upgrade your Ender 3 or CR10 with the Mantis Dual 5015 Toolhead , designed for the TZ E3 2.0 hotend and enhanced cooling. This toolhead features dual 5015 blower fans and a 3010 fan, providing exceptional airflow and cooling performance…
I needed a way to mount the Stealthburner with an original Bondtech LGX to my CR10 S5. I found this Afterburner adapter on thingiverse and remixed it to fit my needs ( https://www.thingiverse.com/thing:4638150 ). The LGX adapter came from…
Wall mount a Verizon CR1000A router. If you don't have a M10 bolt to secure the router to the stand, a printed version is provided. I use the printed version. WIFI sign is provided as a separate part to change up the color and make it…
Hi, this profile works perfectly for my printer and I get really good quality prints. Make sure you calibrate yours and double check my settings for compatibility issues according to your mods or others. Check my other CR10 Smart Pro…
This is an extremely cheap filament guide I made to prevent filament from grinding on the runout sensor on the CR10S Pro V2. I've used mine for hundreds of printing hours, though. It's bent a bit, but still works. I intended to replace it…
The model provides a drop-in replacement for the standard CR6 SE spool holder, with options for 3 or 4 608 bearings ensuring a smoother rolling of the filament spool. The original goal was to reduce the oscillations caused by the original…
After upgrading my CR10s Pro v1/v2's to the Microswiss all-metal hotend, I've struggled to find fan ducts that directed air flow properly. Most fan ducts that I've found have had four issues. 1 - They don't direct air low enough. 2 - The…
This is part of my CR10S conversion to stand alone- see the control box page for more detail.
Magazine stands for a wide range of mags. The double stack stand fits most double stack pistol mags - shown below with glock 9mm, S&W .40, S&W 9mm, Taurus 9mm, FN 45ACP, and Taurus 22LR. The single stack version should fit any 9mm-or-less…
I can't take credit for the texture files, they were from thingiverse, https://www.thingiverse.com/thing:3826493 Here's a GitHub gist of the config bundle I'm using to print PPE.…
Not perfect, but better than anything I could find online.
I've made a small change to a great fan duct design by Andnyl. Just cut the back edge of the duct inlet area at a 45ish degree to hopefully better direct the air to the ducts instead of slamming right into a flat, square box as in the…
The Voron V0.1 is a fantastic printer, but the Mini Afterburner toolhead currently can only be build with either a DragonFly, a Dragon or a Mosquito hotend. These hotends are great, but they are very expensive. This mod is a Mini…
Spool holder for frictionless spool rolling. use with 608 Bearings Category: 3D Printer Parts
1:10 Ladder, steps to the roof PLA, 210°C/60°C
An adapter for installing VORON Stealthburner toolhead on your Creality CR10S-Pro (if V2 shares the same X-carriage plate, then it works for V2 as well). Just use this adapter to connect stock X-carriage plate and the SB assembly. The…
This is a simple X axis linear rail upgrade. Uses 1 MGN12 rail/block, a couple hammer nuts and screws as well as printed files. I wanted to find an easy solution that did not require any major parts changes or disassembly to my X axis.…
This is part of my CR10S conversion to stand alone- see the control box page for more detail. The mount is compatible with both the stock PSU and the Meanwell PSU that I upgraded this too (and other PSUs as well, provided they use the…
Conversion of CR10 V2 to a CoreXY with V-Slot wheels Mostly inspired by V-King/V-Baby Z-Carriage D/C-Bot Hardware: additional 10x 400mm 2020 V-Slot or T-Slot Profiles (some could be longer with minor changes in design), additional 2x…
Another filament guide for CR10 or Ender3 UPDATE Body_v2.stl - Redesign to align the filament with the hole. Inspired in https://www.thingiverse.com/thing:2186253 and https://www.thingiverse.com/thing:3035501 but with the best of both.…
Thank you to @FinneganFalco for the original design. I accidentally ordered the Direct Feed V6 hotend clone instead of a Bowden version. As usual, I thought "challenge accepted!" Using the same ideas as my extruder plate design, this…
This is a remix. Improved the strength of the part, reconnected the spindle to the shaft (was weirdly disconnected) and added a rim to the end of the spindle to help catch the spool if it gets shaken to the edge. Also included a mirrored…
Hi, This is a complete X carriage design for Ender3/CR10. It uses a very light and compact twin blower system for part cooling that can be used as a bowden setup or as a direct drive with the new « Sherpa-Mini » by Mellow akka « Libra ».…
longer is better länger is besser :-D
CR10 SE Extruder housing that has cut out in front to make it quieter, in my testing made 7db difference from the stock one. Parts needed: x3 m2 threaded inserts Do not use PLA, it will melt, PETG is working for me for some time
This is a mix of the original eB design by gibbed https://www.thingiverse.com/thing:3419531 with ideas from the Mini-Me duct https://www.thingiverse.com/thing:4375296 I wanted to try the simple short duct of the eB shroud but was worried…
A simple remix of a loader I found to make it load from the back instead of from the top. I like plunger-style loaders like this, but I find that the rounds end up getting all wonky when you drop them in from the top. I prefer to load…
support de caméra ender CR10 smart pro , 3 version disponible (hauteur différente pour un plans de vue diffèrent) pour moi la dernière version ( v4 )est la meilleur ,elle est positionner plus au centre c'est la version que l'on voit sur…
The Led strip is supplied directly with the power supply of the printer. You need: LED Strip https://www.amazon.de/gp/product/B08JY5C6G7/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1 Toggle switch…
CR10 SE drag cable extruder mount To use with this drag cable https://www.printables.com/model/502004-ender-3-s1-pro-heated-bed-cable-chain/comments Hardward required: M3x20+ screws or be creative Imporvements are welcomed
As the firmware of the Creality's screen mounted on Ender 3 V2 isn't open source, if you want to enable some options as Babystepping or Mesh Bed Levelling in Marlin, avoiding using precompiled firmware, you need to replace your screen. I…
Standard extruder on most Creality printers.
For a slat-wall with a distance of 75mm spacing with M5x15mm I am using the aluminum inserts in the wall so you may need different t-nuts if you are not Category: Sport & Outdoors
Hardware Needed: (1) 1/4x28 Bolt - 1.5" or longer (1) 1/4x28 Nut
An adapter that lowers the cr10 smart screen so you can fit it whit manual levelling nuts.
My version of Spool Holder, may be used in various printers with standard top rack 20x20. Screws needed: DIN912 Hex socket head cap M5x18 (x2); or M4x18 (x2) - look for other stl file!
Designed to make the receiver and antennas a self contained unit to mount in an R/C plane, car, boat, or whatever you want. Assembles with (5) m2 socket head screws. Can be mounted using servo tape or extend screws through base and into…