Search results: radiator

Sort order

1,017 models

P
PrintablesJohn

Radiator towel hook

I'm not sure if this model matches definition of a remix because I made this model by myself and completely independently. However, while uploading it to Printables, I discovered Parametric radiator towel hook made by vaxxi . This model…

Downloads
3,968
Likes
797
Rating
4.88
P
PrintablesExtrutim

Thin Radiator Bleed Key

A small thin radiator bleed key if like me you have no space to reach the valve with a normal square key. I added a 5mm hole for a keychain. If you like check out my other designs too!

Downloads
1,670
Likes
300
Rating
4.95
P
PrintablesRNLDNKP

Radiator valve adapter M28 > M30 + Pin Extension

For my new Eurotronic Spirit smart radiator valves I needed a clean and easy adapter. There are many adapters out there that are quite bulky, couldn't figure out why that would be necessary... So designed my own in a few minutes. My…

Downloads
1,525
Likes
49
Rating
5
P

Radiator bleed key

I'm tired of losing my radiator bleed key every time so I decided to make one myself that can be printed within 15 minutes. Ofcourse not as strong as the metal ones, but strong enough to loosen the bleed valve on the radiator. Even when…

Downloads
936
Likes
47
Rating
5

Danfoss RA-N to M30x1.5 Radiator Adapter

Just a warning, the tolerances on RA-N valves are pretty bad, so this might not fit you valve without some modifications, i designed it to fit my own. I made it because the one included in the shelly trv is badly designed. Print left,…

Downloads
807
Likes
44
Rating
4.88
P
PrintablesHawwwran

Better Bathroom radiator heater towel hook hanger

Simple and stable hanger hook. Click fits Stays tightly on place 2cm rail diameter Print instructions PETG is the best, but PLA works great as well. 0.3mm layer height is just fine.

Downloads
765
Likes
115
Rating
4.83
P
Printablestom

Heizkörper Doppelrosette/ Radiator double rosette - Version 3 Abdeckung Heizungsrohr/ Cover heating pipe

Hier eine "Abdeckung Heizungsrohr/ Cover heating pipe" mit unsichtbarer Befestigung. Das Modell sieht sehr ansprechend aus und ist für verschiedene Rohrdurchmesser erhältlich. Die Befestigung erfolgt ohne Schrauben o.ä., sondern wird wie…

Downloads
741
Likes
55
Rating
5
P
Printablesgoldsquadron

Thermaltake Core P3 360mm Radiator/Fan Mount

A mount that can hold 360 to 120mm radiators or fans. I needed a mount that could support a 240mm radiator for my GPU and could only find models for 360mm. For 360mm radiators just screw in place and then slide onto the poles of the case.…

Downloads
684
Likes
31
Rating
4.5
P
PrintablesFilip

Radiator hook/hanger

This is a hook/hanger model designed to fit a popular European radiator model. It was designed for the INCASE DAYPACK backpack. Of course, the hook/holder will work for other backpacks, bags, or any other items you want to hang. In the…

Downloads
445
Likes
84
Rating
4.14
P
PrintablesRePeteeMe

Bathroom Radiator Hook

I created this hook for bathroom radiator to extend possibility to hook other things on radiator. Hook dimensions: height: 75 mm depth: 50 mm width: 19 mm Radiator dimensions: rib diameter: 24 mm ribs steps: 44 mm (see the image) I used…

Downloads
404
Likes
57
Rating
4.89
P
PrintablesAlvomane

Radiator Hook | Heizkörperhaken

Removable strong hook to hang something on a Vogel & Noot Type 21 two-layer compact radiator . Update 07.03.2020: Added a slightly stronger version V2.0 with rounded edges. I recommend printing this in a material like ASA, ABS or PETG…

Downloads
374
Likes
48
Rating
4.6
P
PrintablesJiri Blazek

Radiator vent keys

Vent keys for all radiators in your house. Classic key and lever key for to use less force. You can easily hide behind a radiator. Odvzdušňovací klíčky pro všechny radiátory v domě. Klasický klíček i pákový, kde není zapotřebí použití…

Downloads
347
Likes
66
Rating
5
P
Printables3D_HRLV001

Bathroom radiator towel hanger

Bathroom radiator towel hanger For 21mm diameter pipe Material: PETG Infill: 50% Perimeters: 3 Nozzle: 0.4 Layer heigt: 0.2 I printed Prusa mk3s+

Downloads
304
Likes
38
Rating
5
P
PrintablesTommi

Towel radiator hanger with names

You can donate here: https://www.paypal.com/donate/?hosted_button_id=BTTC6BR69RRAL Jednoduchý držák ručníků na radiátor (žebřík) s průměrem trubky 20 mm. Může být beze jména nebo se jménem. Přikládám soubory se jmény Vojta, Tom, Eliška,…

Downloads
259
Likes
46
Rating
5
P
Printablesasdfgeoff

Radiator hook (for drying rack storage)

I designed this over-radiator hook to store this folding clothes drying rack (from IKEA) when not in use. I live in the UK and think my style/brand of radiator is called “Kermi”. I included the Fusion 360 file, if you need to modify to…

Downloads
257
Likes
52
Rating
5
P
PrintablesDanAndersen

Hooks for towel radiators / Haken für Handtuchheizkörper

Simple Hooks for Towel Radiators in your Bathroom. They fit on radiators with 21mm tubes. I added the Fusion360 as it is a nice beginner sketch to learn remixing. PETG is preferred due to better heat stability. It's super easy to print .…

Downloads
244
Likes
37
Rating
5
P
PrintablesIxmayer

radiator bleed key (Entlüftungsschlüssel)

Bigger than normal bleed key to make it easier to turn the key.. I used all perimeters and PETG for stiffness.

Downloads
194
Likes
9
Rating
0
P
PrintablesSica

Towel Hook for horizontal radiator (bathroom)

My wife bought a set of 4 towel hooks for the bathroom radiator, but their grip was awful and every time we picked the towel would grab the hook also and fell on the floor. Pretty noisy in the middle of the night. Also after a few falls…

Downloads
177
Likes
22
Rating
5
P
PrintablesJan Kody

Radiator - side panel plug

After a long time of usage, the plastic parts that hold the side panels on the radiator started to fall apart so I decided to make a simple replacement. I decided not to make the whole thin circle because it would complicate the print.…

Downloads
168
Likes
10
Rating
5
P
PrintablesMbrinch

Radiator pipe cover

A simple radiator pipe cover, to make a nice finish.

Downloads
145
Likes
26
Rating
5
P
Printableskikkingoff

Air bleeder key - For radiator air purge

You can attach a key ring . The square measures 5.5mm and the round 9.5mm.

Downloads
141
Likes
12
Rating
5
P
PrintablesJonasovo

Radiator Valve Knob M28x1,5

Replacement radiator valve knob. Open design with 4,5 mm mark. Common in old Prague appartments. Added a slot for a coin to spread the stress. Previous version got punched through into the infill. Compatible with: 1 CZK coin 0,10 EUR coin…

Downloads
128
Likes
10
Rating
5
P
PrintablesJoerg_H

Radiator bleed key / adjustment key holder

Holder for Radiator Bleed Key / Adjustment Key A simple clip for that little bleed or adjustment key from the heating system that we all seem to misplace 😜 The clip provides a place for the key and simply clips onto a piece of pipe:…

Downloads
89
Likes
35
Rating
4.5
P
Printablesslick666

300zx Z32 Lower Radiator Hose Pipe Clamp

This clip secure your upgraded aluminum radiator hose directly to the sway bar. A common upgrade for the 1990-1996 Nissan 300zx is to upgrade the lower radiator hose to a solid aluminum pipe. This upgrade at one time used to have a…

Downloads
87
Likes
10
Rating
0
P
PrintablesDiastako

Bath Radiator hanger

A hanger, to hang towels on bathroom heat radiator. FreeCAD model is also attached for customizations. I used PETG, but other materials should also work.

Downloads
86
Likes
10
Rating
0
P
PrintablesCyberdyne

EKWB D5 Pump to Radiator Mount

I printed this model with 0.2mm layer hight and minimal support as shown in the picture. Please don't judge my print. It was only a high speed print as a test piece. It was working fine and I had no time to print an other one yet. Let me…

Downloads
83
Likes
2
Rating
0
P
PrintablesMajohnes

Tuya ZigBee Radiator Actuator Thermostat Smart ADAPTER

This custom-designed part serves as an adapter between a SMART thermostat “ Tuya ZigBee Radiator Actuator Thermostat Smart TRV Thermostatic Valve Temperature Controller Support Alexa Google Home Smart Lif ” and the pre-existing heating…

Downloads
76
Likes
4
Rating
0
P
PrintablesNozzle

Halter für Föhn an Heizkörper Hair dryer bracket for radiator

Gedruckt mit PETG 40% Infill. PLA ist nicht sinnvoll da die Heizkörper ja sehr warm werden können. Das Loch für den Föhn ist 80 Millimeter. Printed with PETG 40% infill. PLA does not make sense because the radiators can get very warm. The…

Downloads
74
Likes
10
Rating
0
P
PrintablesDan Rogers

Radiator Bleed Key

When your radiator has too much air in it at the start of a new season, the plumber will use a key like this on the bleed valve to allow excess air to escape out of the heating system. This plastic key should be wrapped in thread or wire…

Downloads
55
Likes
28
Rating
5
P
Printablesredaeq

Haken für Handtuchheizkörper / Hooks for towel radiators

Haken für Handtuchheizkörper zwei einfache Haken für Handtuchheizkörper. Für Rohrdurchmesser von 22,5mm und 27mm --- Hooks for towel radiators two simple hooks for towel radiators. For pipe diameter of 22.5mm and 27mm

Downloads
55
Likes
10
Rating
0
P
PrintablesNewksHub

Hive Smart Radiator Valve TRV Cover

Replacement Hive cover to change the colour instead of painting. This is non rotating so will not be able to adjust the valve manually from the valve itself. I decided to leave the button available if required and to try and keep the…

Downloads
53
Likes
4
Rating
0
P
PrintablesRPK

Hair Dryer Fan Radiator Mount

EN: The system was intentionally printed in 2 parts to reduce the use of supports to a minimum. Due to the shape, the entire object could not be printed in one without a myriad of supports, so it was split into 2 parts. The joint consists…

Downloads
46
Likes
4
Rating
0
P
PrintablesJan Mario

Bathroom radiator hanger towel hook

A bathroom radiator hanger hook for those who like to use towels with or without a handle. completely modeled in tinkercad. it fits perfectly on a radiator pipe with a diameter of 20 mm. it clicks nicely and stays in place. if you like it…

Downloads
43
Likes
5
Rating
0
P
PrintablesUlbisch

Hook for towel radiators, snap-in design, highly resilient.

Hooks for towel radiators gives you more flexibility in drying your towels or other things to be dried in your bathroom. The presented design comes up in different dimensions for different towel radiator types. In case your towel radiator…

Downloads
42
Likes
3
Rating
0
P
Printablessilasborowy

Magnetic 90mm Fan Holder for Type33 Radiator

The fan holder is meant for attaching a PC fan to a heating radiator to increase efficiency of the radiator by active ventilation. The bracket makes use of three 10mm x 2mm neodymium magnets to attach a 90mm PC-fan to a type33 radiator.…

Downloads
38
Likes
13
Rating
0
P
PrintablesUM3D

Handtuchheizkörper Doppelhaken, Towel radiator double hook

Passend für ca. 30 x 30mm Vierkant und Ausschnitt für Durchmesser ca 23mm Suitable for approx. 30 x 30mm square and cut-out for diameter approx. 23mm - Besonders zu empfehlen, wegen Stabilität und Temperatur: Filament: PETG Perimeter: 4…

Downloads
35
Likes
6
Rating
0
P
PrintablesDjKinder22

Tundra Radiator Shutter Adaptor

If you removed the grille shutter on the Tundra to place some aftermarket accessories, you may get a malfunction error. This small device is to give the motor the resistance needed to stop this error from showing. Print Settings Printer…

Downloads
33
Likes
1
Rating
0
P
Printablesmrmila

Radiator wall spacer - Distanční podložka pro radiátor

[CZ] Distanční podložka pro radiátor Cca 10cm dlouhý závit. Tisk z PETG, jedna strana závitu plochá, pro lepší tisk na boku. Vrstva: 0.15 Perimetry: 3, spodní a vrchní vrstvy: 5 Výplň: 25% gyroid Podpěry pouze pod závitem. [EN] Radiator…

Downloads
30
Likes
2
Rating
0
P
PrintablesRPK

Hair Dryer Fan Radiator Mount Remix

EN: I noticed that the hairdryer liked to position itself perpendicular to the radiator, which takes up space. I therefore added 2 studs to the ring part to hold it in the position parallel to the radiator (to the wall). The other part(s)…

Downloads
28
Likes
2
Rating
0
P
PrintablesIrgendeintyp

Oventrop UniBox Cover for Bosch Smart Home Radiator Thermostat II

This cover allows you to install a Bosch Smart Home Radiator Thermostat II within an Oventrop UniBox, enabling control of your underfloor heating circuit. Important: Please note that the peg spacing and dimensions from the original design…

Downloads
25
Likes
2
Rating
0
P
Printables0nd1ss

radiator hook

Hook for heating pipes with a diameter of 20 mm. Recommended for printing with PTG.

Downloads
24
Likes
1
Rating
0
P
PrintablesLukasZat

The BEST radiator towel holder!

Diameter of the radiator bar: 27mm Width of the holder: 15mm Very easy and quick print. It holds beautifully!

Downloads
24
Likes
6
Rating
0
P
PrintablesIrgendeintyp

Oventrop UniBox Cover for Bosch Smart Home Radiator Thermostat II (Ver.2)

This cover allows you to install a Bosch Smart Home Radiator Thermostat II within an Oventrop UniBox, enabling control of your underfloor heating circuit. This is the second version of this model, improved from an earlier model that was…

Downloads
22
Likes
2
Rating
0
P
PrintablesMartin

Vileda express feet for ribbed radiators

Small replacement feet for the vileda express that offer better support on older ribbed radiators. *estimated print time and material usage (P1S, 0,16mm layers, PLA, 3perimeters): 29m, +-11,3g

Downloads
22
Likes
5
Rating
0
P
PrintablesRPK

Philips bhd501/00 Hair Dryer Radiator Mount

EN : The system was intentionally printed in 2 parts to minimize the use of supports. Due to the shape, the entire object could not be printed in one without a myriad of supports, so it was split into 2 parts. The interface consists of a…

Downloads
18
Likes
3
Rating
0
P
PrintablesFoShizzle

Peugeot 306 Radiator Cap Hose Adapter

I created this for my Peugeot 306 because I wanted an easy way to flush the radiator and not have gravity do the work slowly. Check to see if your car uses the same thread pitch. With this, the (relatively low) pressure of a garden hose…

Downloads
17
Likes
1
Rating
0
P
PrintablesDavid Indra

M30 Radiator valve knob - additional spacer

Using the great M30 radiator valve knob, I sometimes need to add additional spacer object inside the knob to press the valve axis strong enough. So I've created a simple circular “coin” object to fill this gap. Relates to:…

Downloads
13
Likes
0
Rating
0
P
PrintablesChya

Radiator Extension + Hook

This is a radiator extension to let increase the upper support surface on some types of radiators (those in my house) to let dry clothes in a stable way on the radiator top and let them flow in front of the radiator without falling. And…

Downloads
11
Likes
1
Rating
0
P
Printablestom

Abdeckung einer Bohrung am Heizkörper/ Covering a hole on the radiator

An einem Heizkörper war die Abdeckung einer Bohrung gebrochen. Dadurch konnte man auf den Hahnblock schauen, was nicht sehr schön aussah. Die Öffnung wird durch diese Abdeckung verschlossen. Die Bohrung in der Seitenverkleidung des…

Downloads
8
Likes
1
Rating
0
P
PrintablesMrRogers

External Radiator Mount Inspired by Swiftech "Radbox" MCB-120

My recreation of an old PC water cooling external radiator mount, Inspired by the Swiftech "Radbox" MCB-120 It's made of a two part construction, the holding plate and housing for ease of installation with multiple slots for vertical and…

Downloads
7
Likes
2
Rating
0
P
PrintablesEGDO

Roll holder for tubular radiators

Roll holder designed for 25 mm diameter tubes radiators. you can avoid wall fixing a roll holder. It needs a 25 mm diameter tube with 1 mm thick walls to be completed (standard item for electrician plants). All the parts needs to be glued…

Downloads
6
Likes
0
Rating
0
P
PrintablesCorsair

CORSAIR AIO Radiator Tubes Comb

A cable comb to help organize your AIO radiator tubes. For use with 11mm OD tubes. Comes in varying hose spacings of 5mm, 10mm, 15mm, and 20mm.

Downloads
4,156
Likes
1,189
Rating
4.87
P
PrintablesWilko_SLO

Radiator Air Key (Keychain)

Print it with PETG To make the Radiator Air Key more powerful, I suggest the following print settings: Print orientation:

Downloads
4,087
Likes
558
Rating
5
P
PrintablesTigFur

Simplest radiator hook / hanger

This little hook is designed to be simple to print and lightweight yet still very useful. If your radiator looks at least similar to mine, it will likely fit. Second model also has an extra round hole of 22mm diameter modeled to it, which…

Downloads
2,306
Likes
637
Rating
5
P
Printablespumikachu

Radiator hooks for towel rail

A simple hook for radiators to snap in a 10mm rod. The rod is placed 60mm away from the radiator. Printing in PETG instead of PLA is advised to ensure heat resistance of the material. The radiator pictured is from the brand “Vogl&Noot”.…

Downloads
1,979
Likes
886
Rating
4.8
P
PrintablesEnrique Juárez

Radiator with cells

una pequeña modificación al Radiador del TIE Fighter Kit modelado por Racoon Design , para darle un toque mas de detalle :) ------------------------------------------- a small modification to the Radiator of the TIE Fighter Kit modeled by…

Downloads
1,043
Likes
142
Rating
5

Radiator key for bleeding

Radiator Valve key for easy bleeding. Radiators need bleeding when they have air trapped inside them.

Downloads
1,010
Likes
105
Rating
4.52
P
Printablesmarcwingduck

Bathroom Ladder Radiator Towel Hook

Note the pointed tip of this sleek towel hanger design, that does not care for the presence of a hanging loop! Save yourself the time of looking for the side of the towel with the hanging loop and just hang it up. Orientation doesn't…

Downloads
910
Likes
226
Rating
4.78
P
PrintablesSkyline989

Radiator Key

Simple Radiator Key

Downloads
769
Likes
81
Rating
5
P
Printablesbjoerns1983

Heizkörper Lüfter Radiator Fan

A simple bracket to mount an 80mm fan under a radiator. So the natural convection can be supported. The fan can be mounted either with M4 screws and nuts or with rubber decouplers. The fan is held by four 10x2mm neodymium magnets per fan.…

Downloads
755
Likes
107
Rating
5

Hooks for drying on radiators

If you have a long rod 6-8 mm in diameter or several such rods, the functionality of this device can be greatly expanded. The source can be edited in Fusion 360.

Downloads
695
Likes
169
Rating
4.67
P
PrintablesHawwwran

Radiator hook hanger / Háček na topení, věšák

Introducing: My 3D Model Radiator Hook Have you ever found yourself in a situation where you needed to hang an umbrella or some clothing on your radiator, but couldn't find a suitable place? The solution is here! My own 3D modeled hook is…

Downloads
614
Likes
161
Rating
5
P
PrintablesOzziemandias

Danfoss M30 Radiator adapter

EN: Original part was a little to short for my application on old cast iron radiator valve, so I've made my own "remix" of it. It's based on AlloT's adapter but made from scratch using Fusion 360. It has thicker, stronger walls so it can…

Downloads
576
Likes
19
Rating
0
P
Printablessmandrews

Lian Li O111D Mini 360mm Radiator Bracket

I created this STL to help fit my Asus Ryujin ii 360mm radiator in the top of my Lian Li O11D Mini case. By default, this case is not made to support that large of a radiator on top. Lian Li sells a bracket kit to do this very thing but…

Downloads
562
Likes
34
Rating
5
P
PrintablesSchuMaker

Radiator towel hook | Different sizes for all common radiators

Easy to print hook for your heater. Have printed it myself from PLA and works well. The model is available in different sizes. Starting at 15.0 mm diameter heater tube, up to 25.0 mm in 0.5 mm increments. I recommend choosing the next…

Downloads
551
Likes
83
Rating
4.82
P
PrintablesDaBene

Nissan S13 Radiator Mount

Nissan S13 Radiator Mount with Nissan or Nismo logo. The part fits for Nissan S13 or PS13 with SR20DET or CA18DET. Printed with ABS filament. The bracket can be used on the left and right side. PLA is not recommended because it will get…

Downloads
551
Likes
47
Rating
4
P
Printablesflbdesign

RADIATOR CAP TOOL 23+ KTM/GASGAS/HUSQVARNA

If you have a 23+ KTM, Gas Gas or Husqvarna you know removing the new radiator cap is nearly impossible! Works on all 23+ KTM/GasGas/Husqvarna Austrian bikes. Print in PETG, TPU, ASA 100% infill with backing

Downloads
544
Likes
39
Rating
5
P
Printablesnetwalk

Heizkörperverstärker mit Magnethalterung, Radiator Fan, Alternative zu SpeedComfort

Update vom 12.04.2023: Neue, kürzere Endkappen für DC-Hohlstecker-Einbaubuchsen, 90° versetzt ( https://www.amazon.de/gp/product/B093FTFZ8Q/ ) für alle Versionen Update vom 13.03.2023: Neue Endkappen für DC-Hohlstecker-Einbaubuchsen (…

Downloads
533
Likes
105
Rating
5
P
PrintablesT3KMaker

Honeycomb 360mm Radiator Grill

this is a 360mm honeycomb radiator cover/grill inspired by Seeger's "Honeycomb 120mm fan grill" I liked the design and didn't want to have to print 3 for my radiator so i decided to just make it a bit longer and also a bit wider to fit…

Downloads
522
Likes
41
Rating
5
P
PrintablesZocazola

CoolerMaster NR200 top-mounted radiator bracket

Summary of the T240R- Top 240 mm Radiator mount for the Coolermaster NR200 ITX case. This is a mounting assembly/system mod for the Coolermaster NR200 to mount a full size 240mm radiator with 2 120mm fans to the top of the NR200. This mod…

Downloads
513
Likes
42
Rating
3
P
PrintablesLord Sexy

Heating Radiator Adapter Danfos RA Shelly TRV Adapter Smart Thermostat

I remixed it from lukasto to fit my needs. Only change is the M3 nut. On the original it didnt fit. This fits a M3 nut perfectly. Its not super pretty, but no one will notice… Its a adapter for the heater Print in PETG(!) I used 0.15 mm…

Downloads
467
Likes
35
Rating
5
P
PrintablesNatren

Rotax Max Radiator GoPro Mount

This is the first free Rotax Max Radiator mount for the GoPro. It works by holding it to the radiator with 2 Zip-Ties. You can use it with or without a case, as long as the legs for the mounting are not bigger than 3mm. (Most cases should…

Downloads
466
Likes
8
Rating
0
P
PrintablesMartin Jurů

Držák do koupelny na radiátor / Towel bathroom holder radiator

Towel hooks and holders for heater, shower, and pool Držák na ručníky

Downloads
465
Likes
82
Rating
5
P
PrintablesJendam99

Radiator valve knob - M30x1,5

Simple knob for radiotar valve with outer thread M30x1,5. On the inside top there is a recess with diameter of 20 mm and depth about 1 mm. This recess is intended for a flat piece of steel or any hard material to be placed so as to…

Downloads
457
Likes
31
Rating
5
P
PrintablesHarry

M30x1.5 adapter for Netatmo radiator thermostat

Thank you for supporting me! This is another free 3D model made available for you. I love sharing my models, but designing, testing, polishing, uploading and maintaining them is a lot of work. In case you enjoy this model, please leave a…

Downloads
448
Likes
17
Rating
5
P
PrintablesKutilman Yuri

Radiator degassing / Heater venting drain tool

Radiators/water heaters should be degassed before the heating season to increase efficiency of the heating and prevent issues. Every time I used a cup or almost anything to vent the radiators I got water on the floor or on the wall.…

Downloads
437
Likes
180
Rating
5
P
PrintablesBushi

3dsets bambo Front Radiator Screen toyota & blank

Solid layers - Top / Bottom (0 layers) Infill density: 30% Infill type: Honeycomb Perimeters: 2

Downloads
418
Likes
68
Rating
5
P
PrintablesPrints_r_us

Thermaltake Core P3 45 Degree Radiator Bracket

I created this bracket to allow for a large gpu to be installed horizontally. Mounting wholes are sized to use fan screws to attach to the P3's frame.

Downloads
417
Likes
38
Rating
5
P
PrintablesKubasda

Radiator hook (clip-on) / Háček na radiátor (nacvakávací)

EN: Radiator hook (clip-on) made for the classic white radiator with mounting slot 76 x 7,5 mm. (Its not usable for the ladder type radiator) Easy installation : just put the rear side of hook into the mounting slot , then move the front…

Downloads
397
Likes
117
Rating
4.5
P
Printablesvaxxi

Parametric radiator towel hook

Parametric towel hook designed to be mounted on a wall radiator. Editable parameters: PIPE_DIAMETER - diameter of the horizontal radiator pipe PIPE_DISTANCE - distance between two pipes (outer edges) WALL_THICKNESS - how thick the hook…

Downloads
390
Likes
58
Rating
5
P
Printablesᴄᴇᴘᴎᴋ
Downloads
386
Likes
74
Rating
5
P
PrintablesKnexFour

G1/4 Plug For PC Water Cooling, Radiators, Pumps, Reserviors

As the original author stated, this is not for use in loops . This is for keeping your gear clean and protected in storage.

Downloads
375
Likes
32
Rating
5
P
PrintablesHabit

radiator support bracket Nissan S13 / 180SX / 200SX / 240SX

a radiator support bracket, fits Nissan S13 / 180SX / 200SX / 240SX probably also other 90s Nissans

Downloads
374
Likes
40
Rating
0
P
PrintablesSmaiLee

ATX Open PC Frame Radiator AddOn

I remixed Heblyz design and added a radiator mount on the back/top. I only printed it so far, not tested yet tho. The measurements should work to mount a Radiator via the fan screws onto the mount. 240mm radiator should fit perfectly.…

Downloads
372
Likes
70
Rating
5
P
Printablesinnercube

Bathroom Radiator Towel Hook (Holder Hanger Heating)

This is my design of a towel hook for the bathroom radiator. It clicks in place and shouldn't fall off. The radiator has 22.3mm thick pipes and the distance between the pipes is 19.8mm. For the radiator dimensions there is a little…

Downloads
369
Likes
73
Rating
4.8
P
PrintablesBeamCase_Design

Beamcase - external radiator and fan bracket V2 (50 versions)

This bracket is designed to add radiators and fans on top or below your BeamCase in a strong and good looking way. It is available in 50 different versions depending on your setup. These brackets are designed to work together with the…

Downloads
353
Likes
82
Rating
5
P
Printablesbollibe

Hook for towel radiator - Crochet pour radiateur seche serviettes

Crochet porte serviette destiné aux radiateurs réalisés avec des tubes diamètre 24mm entre axe de 36mm 2 tailles épaisseur 11mm et 16mm Towel hook intended for radiators made with 24mm diameter tubes, whose center distance is 36mm 2 sizes…

Downloads
351
Likes
46
Rating
4.75
P
Printableswanobano

Bathroom Radiator Hook / Hanger

!!! Consider using a material other than PLA due to temperature resistance !!! for towels, cloths, etc. 2 different diameters 25mm 22mm easy to use clamps on pipe does not move small

Downloads
350
Likes
46
Rating
5
P
PrintablesReedTiger

Arctic Liquid Freezer III AIO Radiator Tubes Comb

Arctic Liquid Freezer III AIO Radiator Tubes Comb 13mm spacing

Downloads
337
Likes
32
Rating
5
P
PrintablesToTo

Radiator cap (TRV) - 30mm/1.5mm thread

Just a simple radiator cap (TRV) - 30mm/1.5mm thread

Downloads
337
Likes
14
Rating
5
P
Printablestr8

Radiator valve adapter from M34x1.5 (Polytronic valve) to M30x1.5 (standard for most thermostats)

An adapter to use thermostats or smart radiator controllers (like Fritz!Dect301, CometDect and probably others) on radiators with Polytronic valve. Print in PETG or ABS because PLA is not heat resistant enough!

Downloads
332
Likes
11
Rating
5
P
PrintablesElothan

Keychain Radiator key

A small keyhain radiator bleed key a friend requested that I made. I suggest printing it in strong material.

Downloads
328
Likes
20
Rating
4.8
P
Printables3docity

AIO Radiator hose bracket

Small hose brackets i made for my Corsair h100i AIO radiator hoses. I printed at 0.08 and got amazing detail with the logo and unable to see any lines. Brim was required as i couldnt avoid warping without it. This is my first design, i…

Downloads
322
Likes
46
Rating
4
P
PrintablesJens Friedrich

Radiator Booster fan holder with magnets for 140mm inner width

There are many radiator boosters. This one is for radiators with 140 mm inner width and 120 mm fans. You can use up to 4 radiators. The booster consists of two components: controller holder (need 1 print) fan holder (need 1 to 4 prints)…

Downloads
310
Likes
60
Rating
0
P
PrintablesEstep

Towel Hook For Bathroom Radiators

Snaps into place, so it doesn't wiggle or fall off. Because of the heat that comes from the radiator, I wouldn't recommend to use PLA for this. Diameter of the tubes: 22,5 mm Distance between the tubes: 20 mm Category: Household

Downloads
309
Likes
32
Rating
5
P
Printablesguddl

Radiator hook / Heizkörper Haken 20 mm

Simple radiator hook for towel radiators with a pipe diameter of 20 mm. Printed with PETG, 15% infill and Gyriod filling pattern. --- Einfacher Heizkörper Haken für Handtuchheizkörper mit einem Rohrdurchmesser von 20 mm. Gedruckt mit…

Downloads
307
Likes
20
Rating
5
P
PrintablesPixelramp

The Tower 300 Fan and Radiator Mount

This is an easy mount for fans or a radiator on the left side of the Thermaltake Tower 300. Just print it in one piece if you have the build volume, or split it and use the radiator/fan as support.

Downloads
295
Likes
10
Rating
5
P
Printablesjarza

BMW radiator bleeding screw tool

Easy to print with no supports just use brim. Recommend to use PETG for temperature resistance.

Downloads
294
Likes
61
Rating
4.33
P
PrintablesAlex

Entlüftungsschlüssel für Heizungen / Radiator bleed key

Ein Ersatzschlüssel zum Heizung entlüften, falls das Original mal verloren geht.

Downloads
290
Likes
21
Rating
5
P
PrintablesDatt Flo

Heizkörperrosette, Radiator Pipe Rosette

Hier mal meine erstellte Heizkörperrosette. Abmaße können den Bildern entnommen werden.

Downloads
287
Likes
15
Rating
5