Search results: reflect

Sort order

348 models

P
PrintablesMichaël Fortin

Cheshire Collimation Eyepiece for Reflector Telescopes (1.25 in, Optional Crosshairs)

A one part Cheshire-style collimation eyepiece (1.25 in). More effective than a standard pinhole collimation cap, especially when lighting is not optimal. Update 02-2025: Added a version of the eyepiece with crosshairs. Make sure to print…

Downloads
2,418
Likes
179
Rating
4.98
P
PrintablesAdudino

Bowens Mount Reflector - Universal Bowens-Style Adapter for Lamps

Model Info | Introduction I want to introduce you to an easy-to-print Bowens Mount Lamp Reflector. I use it printed in PLA with my lamp up to 50% of the maximum wattage, and it doesn't melt or get soft. Save your money as these typically…

Downloads
132
Likes
19
Rating
0
P
PrintablesParsingphase

Small cones for supporting reflective poles

Designed to mark the safe parking areas in front of and inside my garage - reflective driveway poles like these are ideal markers, but are designed for sticking into turf. These small, lightweight cones are designed to hold these upright…

Downloads
22
Likes
5
Rating
0
P
PrintablesMark McIntyre

AirTag Bike Mount / Reflector

AirTag Bike Mount / Reflector Apple AirTag is a fantastic little device, and I wanted to be able to use one to track my bike in case of loss or theft. There are expensive accessories out there, but I wanted an inconspicuous, stylish, and…

Downloads
1,650
Likes
330
Rating
4.94

Reflection Blocker

parts required 2 x M3 socket screws (15 to 35mm long) 2 x M3 washers OnGlass Mk3 is a compact articulated lens hood, designed to block out reflections when taking pictures through glass. It also allow the camera lens to be tilted up to…

Downloads
946
Likes
207
Rating
5
P
PrintablesN7 Cat

Scope ARD Anti Reflection Device

Scope Anti Reflection Devices. You could probably scale in the XY plane as needed to fit yours if these are not the right size. Measurements are based on the OD of the scope as these are meant to slip over the scope. Note: I tested this…

Downloads
674
Likes
107
Rating
5
P
PrintablesDave Aldrich

DCAL Camera Collimator for Reflecting Telescopes

A simple DIY collimation device for reflecting telescopes that can be constructed for about 1/10th the cost of commercial solutions. The main components are a USB Arduino Web Cam , a 42x0.75mm threaded extension tube and a 3D Printed…

Downloads
480
Likes
30
Rating
5
P
PrintablesMaff

Newtonian Mirror Cell for reflecting telescopes

A mirror cell for a six-inch Newtonian. It may be rescaled or adapted to metric - the user just needs to identify which hex-bolts will fit after scaling. Note the depicted backplate is not included, it needs serious revision to be…

Downloads
388
Likes
56
Rating
0
P
PrintablesLeHa Design

Yamaha XSR700 MT07 reflector cover

clips on to my 2023 xsr700, i've included the fusion360 file, so you can adapt it

Downloads
382
Likes
36
Rating
4.67
P
PrintablesHarsesis

ESP32 Cam mount for G4 RF1 c for AI on the edge with reflection prevention

I tried out multiple models to mount my ESP32-Cam to my gasmeter. All of them had the issue that the LED on the ESP32 caused reflections on the glass of the gasmeter, which resulted in poor detection by AI on the edge . You can make all…

Downloads
281
Likes
20
Rating
5
P
Printablesksdj55

Chihuahua phone stand sound amplifier reflector

Chihuahua Smartphone stand with large ear hollowed to reflect phone's speaker sound through. Will work with all smartphone with speaker on the lower edge. No support needed. Print Settings Printer Brand: Anet Printer: A8 Rafts: No…

Downloads
280
Likes
32
Rating
5

OnGlass Mk2 Reflection Blocker (Tilt:±46º, Aperture:Ø27mm, AngleOfView:28º)

This articulated lens hood blocks out reflection, when taking pictures through glass. Great for observation deck and aquariums. It allows the lens to tilt ±46º in any direction. The hood has an an angle of view of 28º and an aperture of…

Downloads
274
Likes
57
Rating
0
P
Printables3D KIMBA

Foldable Pocket Reflector: Your Portable Photography Tool

Foldable Pocket Reflector: Your Portable Photography Tool Product Description: Introducing the Foldable Pocket Reflector, the ultimate portable tool for photographers. This reflector folds down to fit conveniently in your pocket, making…

Downloads
258
Likes
94
Rating
0
P
PrintablesBugman_140

REFLECTIONS

Here is the File for my Vase Mode print "REFLECTIONS" I suggest printing it is something Shiny or Glittery for best effect. Photos by Chris Russel - @Crussty on the Twitters I hope you Enjoy. If you like what I am doing please consider…

Downloads
256
Likes
46
Rating
5
P
PrintablesDave Aldrich

Carbon Fiber Telescope 6 Inch f/8 Newtonian Reflector

Build Video - Consider supporting my work on Patreon: https://www.patreon.com/c/Designbydave Files and info on my web site - https://designbydave.net/3d-printed-telescope/ STEP file is included so you can modify and print how you like.…

Downloads
252
Likes
41
Rating
0

Softbox/Reflector Mount with Angle Adjustment (16mm + 8mm Tube Coupler)

I made this fixture as an alternative to an E-Type bracket. Although originally intended as a softbox/reflector holder, it can be used to join any two tubes with diameters of 8mm and 16mm. It has 32 angles of adjustment (11.5 degree…

Downloads
233
Likes
66
Rating
0
P
PrintablesKoosh

Vortex Optics AMG UH-1 Anti Reflection Device

I printed this with a .25mm nozzle on the prusa MK3.5 It was pretty stringy so either printing with a .4 nozzle may work better but the hexagonal lines wil be a bit thicker. Print in the standing orentation with the clips facing up.…

Downloads
194
Likes
18
Rating
2
P

Bike Reflector Hidden AirTag

Discretely protect your bike from getting stolen. There are 3 total parts to this print (the bottom, the top, and the connector) and all you need are 3 screws to put it together (M3 12s will work). The bottom part is printed in Hatchbox…

Downloads
190
Likes
173
Rating
0
P
Printablesseekerbot

Gas Meter G4 Pipersberg AI-on-the-edge without reflection

This mount is designed to attach an ESP32-CAM microcontroller to an gas meter. Together with the open source firmware "AI-on-the-edge" ( https://github.com/jomjol/AI-on-the-edge-device ) of the user Jomjol it is possible to read the…

Downloads
165
Likes
2
Rating
0
P
Printablesjurassic73

LED Strip Light Reflectors for IKEA Lack Enclosure (or other)

Edit - mine has been replaced with a new design to use current COB LED strips with a PWM dimmer: https://www.printables.com/model/870280-cob-led-strip-housing-use-for-lack-or-other-enclos Post a make if you make a set! :) I needed to…

Downloads
164
Likes
37
Rating
5
P
PrintablesLa3emedimension

Modular Cheshire Eyepiece for Reflector telescope (Long version in 1.25)

Long cheshire with modular sight in 1.25 inch ! I advise you to print the main part with a white filament and the sight with a black filament.there are several crosses available and they all adapt via the screw system. The advantage if a…

Downloads
160
Likes
31
Rating
4.5

QiDi X-Max exhaust fan duct / reflector / register box

I made this fan duct / register box for the QiDI X-Max printer to use in my review video: I am not going to drill holes to fix it, just use double-sided tape to seal the egdes. Category: 3D Printer Parts

Downloads
153
Likes
18
Rating
0
P
PrintablesSurfalex2000

Different Magnetic 3D scan Dice/Towers for 10mm reflector

A printable Scan Dice for 3D Scanners (Laser and NIR) with iintegrated magnet. This Dice will help with 3d tracking of objects. This works with nearly every 3d Scan Technology that is based on light. Scale to your need, but this is…

Downloads
140
Likes
13
Rating
0
P
PrintablesTibuck

LED Reflector

Simple cone led reflector's for a little project I am working on, however I'm sure you can find a creative way to use in your own projects , Best print out of ABS so you can use a little bit of acetone on a shop rag to smooth out the…

Downloads
140
Likes
10
Rating
5
P
Printablesnigtayofdoom

Collapsable reflector holder

This is a simple two part holder for mounting a collapsible photography/videography bounce reflector to a cheap light stand. I wanted something to hold a reflector to a stand but couldn't find anything i was happy with, so made this up.…

Downloads
137
Likes
20
Rating
0
P
PrintablesMark K.

Reflector bracket VW Golf 3

For my old Golf i needed a new reflector bracket for the original headlights. So i made it! ;-)

Downloads
136
Likes
16
Rating
0
P
Printablesdrho1337

Bicycle reflector

This 3D printed reflector works by having many small squares on the optics in different orientations. To achieve the effect, the optics must be painted with a chrome effect spray. You will need these printed components: 1x reflector 1x…

Downloads
135
Likes
11
Rating
0
P
Printablesfelixmxr

Parabolic antenna reflector for Potensic Dreamer

Parabolic antenna reflector for the remote of the potensic dreamer pro. I dont think it works for the potensic dreamer 4k, which uses the phone's wifi. I use sticky spray and aluminum foil as seen in the picture. I reached the 2000m…

Downloads
133
Likes
15
Rating
5
P
Printablesjustindavidow

USI Pro Parabolic Reflector

This is a parabolic microphone reflector remixed and reworked in Onshape to accommodate a LOM Usi Pro microphone capsule and to be mounted using a magic-arm or similar. Assembly is simple; print one of each half and glue together.…

Downloads
123
Likes
5
Rating
0
P
PrintablesLeron

Canvas + Reflections Board Game Insert/Organizer/Tray

Consider this a version 0.1? Print two art card sleeves and one token tray. DISCLAIMER: I can't guarantee it will fit since it just barely fits in my box and the measurements were based on my box's dimensions and they can vary by up to…

Downloads
122
Likes
34
Rating
5
P
PrintablesMartin Kolář

3D Sets Mogster light reflector lens

Compatible with Model 20, 21 and 22 Overland! non printed parts needed: Optical PMMA LED Lens Reflector on Ali (i recommend 60 degree) 1W/3W High power LED 20mm star pcb on Ali (1W is sufficient, I recommend warm white for older cars,…

Downloads
121
Likes
24
Rating
5
P
PrintablesShanold

Osmo "Classic" Reflector Adapter

This little adapter pushes up the classic Osmo reflectors to work with the New Ipad airs. 2024 Models.

Downloads
120
Likes
6
Rating
5
P
Printablesklimoma

Moutains reflection - wall art (full and 3 parts)

Moutains reflection - wall art, easy to print There is full version and splited to 3 parts for bigger prints.

Downloads
117
Likes
27
Rating
0
P
PrintablesRoart

7in Bowens Reflector with Diffuser and Grid

7 inch ABS/ASA is ideal for constant lighting PLA and PETG will work fine for strobes Diffusers can be printed in White, or ANY color! Grids best printed in Black Reflector best printed in black and painted white, gold or chrome inside!…

Downloads
110
Likes
15
Rating
0
P
Printablesmach

Vortex Solo 8x36 Reflection Guard

Simple Solar reflection guard for the Vortex Solo 8x36 monocular.

Downloads
110
Likes
10
Rating
5

3D Scanning Marker Pyramid – 3mm Reflective Dots

This small pyramid-shaped holder was designed for scanning small objects with reflective markers. Fits 3 mm reflective dots (6 mm external diameter) from Revopoint Height: 6 mm, with 3 angled faces for optimal marker orientation. The…

Downloads
109
Likes
8
Rating
5
P
PrintablesDryfiredude

iPad Air Otterbox Osmo Reflector

My children had an iPad that we put in an otterbox to protect it. They got an Osmo system as a gift and I didn't want to keep removing the iPad from the otterbox so I made my own reflector that fits over the otterbox and uses the otterbox…

Downloads
108
Likes
8
Rating
0
P
PrintablesSocialmocracy

Reflector Bowens Strobe Mount

This is a smaller reflector modifier for Bowens-style mounts. The opening is 77.2mm. I wanted to mount 77mm filters to block different types of light from VIS to IR and UV. I used some 2-inch aluminum tape on the inside.

Downloads
105
Likes
23
Rating
0
P
PrintablesDD3D

Zip-tie Bike Reflector

This is a simple reflector mount design suitable for most bike frames. Designed around standard reflector supplied with most bikes. I used superglue to glue some rubber band cuttings to the inside to stop it slipping and rubbing on the…

Downloads
103
Likes
28
Rating
5
P
PrintablesOndrej Srom

Roof Reflectors 1/10 RC

Roof Reflectors 1/10 RC for 1 or 4 LED Use superglue Use m2x6 screw for pants

Downloads
103
Likes
20
Rating
0
P
Printablesknbrown

BMW F85 Reflector Delete

BMW F85 Rear Reflector Delete Why pay $120+ when you can design and print a pair yourself? It took a few tries to get the shape just perfect since it looks completely symmetrical but actually isn't. Added in the OEM mounts but that…

Downloads
99
Likes
12
Rating
0
P
PrintablesThinos

Flash reflector

Didn't find a proper reflector for macro photography with Godox TT600 so I designed one. It prints without support even if you may have a bit of sanding to do. printed with white PLA, works like a charm and reasonably strong due to…

Downloads
99
Likes
12
Rating
0
P
Printablesmach

Reflection Guard for Scope

Reflection Guard for the HELIX 6-24×50 FFP scope. Second pictures shows the printed part as white to see how to mount it. Make sure to properly dry your filament as this model is prone to stringing. OnShape model here

Downloads
93
Likes
24
Rating
0
P
PrintablesMark K.

Small Reflector bracket VW Golf 3 Part 2

For my old Golf i needed a new reflector bracket for the original headlights. So i made it! ;-)

Downloads
93
Likes
11
Rating
0
P
Printablespijusn

Xiaomi 1S Rear Reflector Replacement

Reflectors are a safety feature. Consider replacing them with a genuine part. Use this model at your own risk. Dimensions match the original part mostly. The clip is the weakest point in this print therefore it's made as a separate piece.…

Downloads
90
Likes
9
Rating
0
P
PrintablesSpotmatic

Minolta Flashmeter III Spherical Diffuser holder and Reflected Light disc

My spherical diffuser attachment was broken so I replaced the broken parts with this construct. Print Settings Printer Brand: MK3 Printer: Prusa i3 Rafts: Doesn't Matter Supports: Yes Resolution: 200 Infill: 20 Filament: Prusa PETG black…

Downloads
90
Likes
4
Rating
5
P
Printablessh4q

Prusa MK4 display LED reflector

English: It is a simple reflector to see the LEDs on the display, especially if the printer is placed in the original enclosure or the display protrudes above the table. Replace the two M3x8 screws with M3x10. print Settings: layer…

Downloads
90
Likes
17
Rating
4.29
P
PrintablesCatzilla

Brompton light mount using stock reflector arm

If you buy a new Brompton bicycle or bought some time ago, chances are that you have a front circular reflector installed. You can unscrew the reflector and replace it with this print so you can use any light that uses rubber O-ring or…

Downloads
89
Likes
6
Rating
0
P
PrintablesUrsaMajor303

Trijicon Credeo 1-8 LVPO Anti Reflection Device

I used a kill flash design found here: https://www.thingiverse.com/thing:4875497/apps I created a ring that allows the user to snap it over the Credo 1-8 LVPO. My ring sets the grid back from the face a few millimeters to help protect the…

Downloads
88
Likes
12
Rating
0
P

Meshtastic Outdoor Parabolic Reflector - Alfa 915 Antenna

A simple broad parabolic reflector for Meshtastic 915 or 868 MHz. This has been tested with the Alfa 915 N Connector antenna and has minimal impact on SWR. Front to back gain is around 15 dB with almost no difference in signal strength…

Downloads
87
Likes
29
Rating
3

PARABOLIC REFLECTOR SPOTLIGHT FOR LED MODULE 20-100W

Parabolic reflector for studio lighting, it could be mounted on my other lamp designs for standard LED 20-100W modules with 34mm hole distance Focal height 3mm, overall height 200mm Focal height 5mm, overall height 200mm You can print the…

Downloads
87
Likes
8
Rating
0
P
Printablesfirstgizmo

Universal bicycle reflector holder

It prints in one part and is fixed with a M3 bolt (or similar) to your handlebar. It can be taken apart after printing to help with attachment. The reflector can just be cliped in place by sliding it on the clip part

Downloads
86
Likes
16
Rating
0
P
Printablesrakoenig

APS film adapter for the Reflecta x33-Scan film scanner

Printing tipps Important: You need to print this adapter with transparent filament! Print it with 0.2 mm resolution. Why? Short anwer: Non transparent adapters will result in dark images. The long answer you can find in my blog. The…

Downloads
84
Likes
5
Rating
0
P
PrintablesThe Son Of Wil

Bicycle reflector bracket

Reflector bracket as per photos. Just the grey bit.

Downloads
82
Likes
24
Rating
5
P
PrintablesThomas Proffen

Reflector for RC SemiTruck (ProfessorBoots)

Made a simple reflector that can be inserted into the headlights of the truck. Also helps with light not shining through. Should fit tight enough that no glue is needed. Enjoy.

Downloads
80
Likes
7
Rating
0
P
PrintablesTymyn_3D

LCD LED reflector for MK4 // MK3.9 // MK3.5

Introduction This Difusor is designed for people who have a printer on their desk that is short and their LCD screen extends beyond the desk The printout reflects the light from the indicator LEDs and their colour is more visible under…

Downloads
78
Likes
13
Rating
5
P
PrintablesDamianB2

Parabolic Reflector for Ultrasonic Receiver

This is a remix of a parabolic reflector in which I modified the receiver holder mount to accept an ultrasonic ~16 mm diameter receiver. Used Cyanoacrylate glue (Krazy Glue) to glue the 2 halves and hot-glue to secure the receiver to the…

Downloads
75
Likes
6
Rating
0
P
PrintablesNuvz

Passive sound reflector for flat screen TV -Sound bar alternative

I have always struggled hearing sound from the down firing speakers on our flat screen tv. These reflectors help people sitting a distance away from the tv hear the full range of sound direct from the speakers. They attach to the bottom…

Downloads
75
Likes
6
Rating
0
P
PrintablesDrLex

Bicycle Spoke Reflector

The main source page for this model is on GitHub. The GitHub page may have more recent updates and more detailed instructions. Go to my site for an overview of my other models . Not all of them are published on Printables. What is it?…

Downloads
75
Likes
10
Rating
0

Xiaomi M365 10inch mod front fork reflector plate

in order for the 10 inch wheel to fit, i had to mount the wheel a bit lower. but the reflector cap did not fit anymore,

Downloads
73
Likes
10
Rating
0
P
PrintablesMr. Muu

X1C Aux fan air reflector guide

Hi, as I mainly print ABS and ASA I upgraded my Bambulab X1C with this mod: https://www.printables.com/de/model/418630-bambu-lab-integrated-hepa-carbon-aux-filter But I wanted to let the Aux fan with the filter run all the time when I…

Downloads
73
Likes
18
Rating
5
P
Printablesbr0berger

Andonstar AD407 / AD409 Microscope LED Light Spacer & Reflector

Spacer to center the common LED Light for the Andonstar AD407 / AD409. You can apply aluminium foil to increase the reflective area and improve the light. LED Light: https://amzn.to/3wUdy9R Boom Arm: https://amzn.to/4bOq6OE Microscope:…

Downloads
72
Likes
5
Rating
0
P
Printablesmark-bz

Dent Reflection plate

At dent in your cars fender or door is really annoying. And body shops take a fortune to repair those small damages. With this reflector plate you can clearly identify the dent and its boundaries. This allows you to easily rework the area…

Downloads
72
Likes
13
Rating
0
P
PrintablesJon

M.C. Escher's Hand with Reflecting Sphere - HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Overture Black Transmission Distance: 0.7 PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA Overture Cement Gray Transmission…

Downloads
71
Likes
18
Rating
0
P
PrintablesAzega

Wyze Cam V2 Anti Reflection Cover

Cover for Wyze cam v2 (maybe others) to help reduce reflections when placed facing out a window. Reduced back so it can print face down without support. Added wider face to block reflections.

Downloads
69
Likes
11
Rating
0
P
Printablesfaultedlogic

Front Bicycle Reflector Handlebar Mount

This is a 2 piece handlebar mountable front bicycle reflector mount. The front reflector on my Kent Bayside bicycle was mounted on the steering stem. The stem mounted bracket interfered with the fuel tank that attaches at the front most…

Downloads
69
Likes
7
Rating
0
P
PrintablesMark K.

Press out tool for reflector bracket VW Golf 3

I had problem to press out the reflector bracket from my Golf 3. So i made a press out tool for the job. Enjoy the simplicity of pressing out without destroying the parts! :-) So i made it! ;-)

Downloads
68
Likes
13
Rating
0
P
PrintablesWnrsm

Wolverine Reflecta F2D Adapter for 7-inch Reels 8mm Super8 Digitizer

The Wolverine F2D Film Digitizer handles up to 5-inch reels of 8mm or Super8 film. This allows you to use 7-inch reels. I saw other setups here and found them to be complex and require bearings, wood, screws, clamps etc. This one uses…

Downloads
67
Likes
6
Rating
0
P
PrintablesMrFixIt87

iPhone Speaker Sound Reflector, iPhone stand, Otterbox Defender

Stand, sound reflector for iPhone 7 or SE in a Otterbox Defender case. Turns sound towards the front of the phone. Serves as a stand either standing upright or laying on its side. Print Settings Printer Brand: Creality Printer: Ender 3…

Downloads
66
Likes
4
Rating
0
P
PrintablesLa3emedimension

Modular Cheshire Eyepiece for Reflector telescope (Short version in 1.25)

Short cheshire with modular sight in 1.25 inch ! I advise you to print the main part with a white filament and the sight with a black filament.there are several crosses available and they all adapt via the screw system. The advantage if a…

Downloads
66
Likes
9
Rating
0
P
PrintablesDed Makar
18+

The source marked this model as adult content.

Downloads
65
Likes
7
Rating
0
P
PrintablesJack

Reflector Array

parabolic reflector for 6 × ∅5mm LED

Downloads
63
Likes
13
Rating
0
P
PrintablesHanz2508

Updated - CW2 main body - ebb_sb2209/2240 with filament_sensor to reflect the lastest version.

Updated - CW2 main body - ebb_sb2209/2240 with filament_sensor to reflect the lastest version.

Downloads
62
Likes
16
Rating
0
P
PrintablesBebbo

BMW 5-series (E34) reflector clip

Apparently they don't sell this part so istead of buying the whole reflector you can make the part you need. Printed in PETG with treesupport(Cura).

Downloads
62
Likes
12
Rating
0

Volkswagen Golf (5/6) Variant (1k5) - Rear bumper reflectors

Volkswagen Golf (5/6) Variant (1k5) - Rear bumper reflectors (Maybe even AUDI) Needs a bit of time to get it perfect but for me it is enough, I spent like 4 days making this for my car. Hope this helps as original price is around 40-50€…

Downloads
61
Likes
6
Rating
0
P
PrintablesTomKnox

Infrared Reflective Sensor Module

Infrared sensor is most commonly used for object detection and avoidance. The effective range of the sensor is 2 - 30 cm, trimmer (potentiometer) is used to calibrate the sensor for desired range. Operating Voltage 3 - 5 V DC. It can…

Downloads
59
Likes
8
Rating
0
P
PrintablesTomáš Musil

Illuminated Reflectio

🔹 Casual & human 🔹 Enjoyed this model? Coffee = motivation ☕😄

Downloads
58
Likes
17
Rating
5
P
PrintablesGadjet

Urban Arrow Reflector Cap

Replacement Cap for urban arrow reflector. Have only printed on an Anycubic Photon Print Settings Printer Brand: Anycubic Printer: Photon Rafts: No Supports: No Resolution: 0.05 Filament: Resin Resin Category: Parts

Downloads
58
Likes
4
Rating
0

Suzuki GSX-S 1000 GT/GX Pannier reflector delete

A base plate to fill the reflector space on the GT - print this then stick a Suzuki badge to it. The badge I used was from eBay, item number 184397274069 Print this in PETG to reduce the risk of it melting, but be aware it may not cope…

Downloads
58
Likes
4
Rating
0
P
PrintablesFrederix

Bike reflector

I wanted to enhance the visibility of my bike at night without buying an reflector in a store. Its a simple design that you can easily customize. You need to print the housing and 2 of the round “reflectors”. You can either put some…

Downloads
57
Likes
9
Rating
5
P
PrintablesChickenX

Sails and Anchors - A daily journal stencil, motivation, reflection, etc.

The idea is simple. And flexible. ( It's PLA, so it really is… ) While this looks like a cross - there is NO intended religious connection. Just to be clear. You are free to believe what you wish ;) However, it would also certainly work…

Downloads
57
Likes
30
Rating
0
P
PrintablesEmmGee

Simson S51 indicator/blinker reflector

When buying a new set of indicators (at least the front ones), those now contain white plastic reflectors inside the housing, which my original GDR-ones for the back of the moped didn't have. So to calm my inner Monk, for the sake of…

Downloads
55
Likes
8
Rating
5
P
PrintablesLarry Guo

Flashlight body with copper pipe heatsink for LED/reflector drop-in

An upgrade of sorts to https://www.thingiverse.com/thing:2647700 The photos show the new version next to the previous version without heatsinking. This is a flashlight body which includes a 3/4 inch copper pipe and some copper foil to act…

Downloads
55
Likes
5
Rating
0
P
PrintablesSam Fidler

Icom AF reflector

Increase the intelligibility of received signals with this simple audio reflector. Designed for my IC-7300 and IC-9700. Just place this on top of your radio to reflect and improve audio clarity. If you print with the flat side down then…

Downloads
54
Likes
5
Rating
0
P
PrintablesFoppemoa

Fluval Flex 57L light reflector

Update: I've made a new version that hangs down a tad more and has sidecovers. Thus not blinding you when standing to the side of the aquarium. A quickly made light reflector for the Fluval Flex 57L (15gal) aqarium lamp. It simply slots…

Downloads
54
Likes
11
Rating
5
P
PrintablesMike

Yaesu FTDX10 Speaker Reflector

This model helps reflect the upward firing speaker forward for easier listening, especially out in the field for POTA. Magnets are seated right before the layer covering them (pause at layer 16). The 3MF file has the pause and support…

Downloads
53
Likes
7
Rating
5
P
PrintablesZuzu3D

A Thousand Reflections

The Soul of the Guitar is a unique artistic sculpture where music and the human form become one. The elegant female silhouette seamlessly blends into a classical guitar, creating a surreal composition that symbolizes harmony, creativity,…

Downloads
53
Likes
5
Rating
0
P
PrintablesLarry Guo

Flashlight body for LED/reflector drop-in module V2

This is version 2.0 of another flashlight, https://www.thingiverse.com/thing:2581075 UPDATE: a newer version of this, with a copper pipe heatsink, is here: https://www.thingiverse.com/thing:2957437 The problem with the previous one was…

Downloads
53
Likes
5
Rating
0
P
PrintablesBuzz A.

Front light reflector glass for Sandy Mini 3D Sets

Front light reflector glass for Sandy Mini car model. Use transparent filament, e.g. PETG.

Downloads
51
Likes
7
Rating
0
P
Printablesjuh

fischertechnik TCRT5000 infrared reflective sensor

A compact infrared reflective sensor for fischertechnik, based on the TCRT5000 reflective optical sensor with transistor output . I needed them for a line-following robot. Use an analog input pin to measure the signal (sensor out pin).…

Downloads
51
Likes
4
Rating
0
P
PrintablesMike

Reflector Support for use on a CT90

This is a reflector support for use on a CT90

Downloads
50
Likes
3
Rating
0
P
PrintablesBhgp

Garmin Varia RVR315 Bike Support with 90-Degree interface (With and Without Reflector)

Remix from: https://www.thingiverse.com/thing:3733513 (not found in Printables) I have added some reinforcements and the 90 degree turn garmin interface. I also made an extra version with place for a reflector. Printed with PLA 0.2 mm 25%…

Downloads
50
Likes
1
Rating
0
P
PrintablesJRLucas13

Reflector Telescope Easy

This is a cheap and easy-to-build telescope that I designed for one of my 6th-grade students last year. In the one in the picture I used ¾" wooden dowel rods, but you can use whatever works. The eyepiece was the only nonoriginal part and…

Downloads
50
Likes
19
Rating
0
P
PrintablesBasF

Reflection Dice

Reflecting on your project, your team dynamics or maybe you relationship is always a good thing. This Dice helps you when you want to reflect together with somebody. Roll the dice and the icon which pops up above is the one you will…

Downloads
49
Likes
0
Rating
0
P
Printablesdecretk

Porsche G-model rear reflector fastener

Plastic fastener to hold the rear reflector in place on Porsche 911 G-models (1974-1989). These replace the "99959144702 Cage" Porsche part The idea that M4 nuts (preferably lock nuts) are placed in the back of these. An M10 wrench can be…

Downloads
49
Likes
12
Rating
0
P
Printablesbluefin66

Bike wheel spoke reflector holder

Print with supports at 45 degrees relative to the bed for best results. Made with Openscad.

Downloads
47
Likes
4
Rating
0
P
PrintablesTmpx64

Vintage -Soubitez- tail light cover / cap / reflector

I recently acquired an old racing bicycle and noticed that this particular part was missing, so I created a replacement for it. It's printed using Translucent Red PETG, ensuring its functionality during nighttime rides. These tail lights…

Downloads
47
Likes
3
Rating
0
P
PrintablesAjax

Cateye Reflector Holder Woom

My little one fell and the original broke. this is 100% Copatible. I Printed in black PETG for the flex. Sideways because of the bending of the part.

Downloads
46
Likes
8
Rating
0
P
PrintablesDomnT12

Makita reflector

I added a dimmer since the AliExpress reflector was very strong, and sometimes it's good to be able to reduce the brightness a little. I used: dimmer:…

Downloads
46
Likes
8
Rating
0
P
PrintablesJosef

Road bike reflector mount for Biltema reflex (updated feb 2026)

Updated 2026-02-20: A reinforced model is added because I hade a few snaps in different places. Mount in the center of the handlebar (31.8mm mount) next to stem. It is "off center" to be able to have it somewhat centered. I mounted it…

Downloads
46
Likes
8
Rating
0